Guide_Wii/_pages/pl_PL/bootmii.md

title
BootMii Backup

{% include toc title="Table of Contents" %}

If you need help for anything regarding this tutorial, please join the RiiConnect24 Discord server (recommended) or e-mail us at support@riiconnect24.net. {: .notice--info}

You need an SD card to create a NAND backup using BootMii. If you do not have one, you can skip this page, although it is highly recommended to make a NAND backup if you can. {: .notice--warning}

BootMii as boot2 is recommended, but only available to install on early Wii consoles. Otherwise, it can only be installed as an IOS. {: .notice--info}

One of BootMii's most important features is the ability to backup and restore your Wii's NAND storage. We will be going over how to perform a NAND backup. You can then restore from that backup for any reason. It's a good idea to make a NAND backup regularly or before doing something risky to your console (and if you know what you're doing, you won't have to do anything risky).

Requirements

• An SD card with at least 512MB of free space

Instructions

If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case. {: .notice--info}

1. Launch the Homebrew Channel.
2. Press the HOME Button, then select "Launch BootMii".

If the Launch BootMii button does not appear, please re-launch the HackMii Installer and install BootMii. {: .notice--info}

Navigating BootMii is not possible using a Wii Remote. You must use the POWER and RESET buttons on your console, or a GameCube controller plugged into port 1. To navigate between options, press POWER on your Wii (or left/right on the +Control Pad on a GameCube controller). To select an option, press RESET on your Wii or A on your GameCube controller. {: .notice--info}

If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download this zip file and extract it to the root of your SD card, then try again. {: .notice--warning}

1. Select the Options button (the icon with the gears).

2. Select the BackupMii button.

   • A NAND backup will start. You can watch the progress on the screen.
   • "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
   • After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.

3. When the backup is complete, exit the NAND backup screen by pressing any button.

4. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to.

To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover). Please be reminded that restoring a NAND backup is usually a last resort, and that there often better ways to fix your brick. Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.

To make sure you don’t lose the files, it's recommended to copy nand.bin and keys.bin from the root of your SD card to your computer. {: .notice--info}

Continue to Priiloader Installation
Priiloader adds a level of brick protection, and is highly recommended, especially if you were only able to install BootMii as IOS. {: .notice--info}