Guide_Wii/_pages/ja_JP/cios.md

title
cIOS

{% include toc title="Table of Contents" %}

While cIOS has largely been supplanted by AHBPROT, which gives complete hardware access, it still has useful applications. For example, this enables the functionality of USB loaders like USB Loader GX and WiiFlow, alongside other pieces of homebrew like SaveGame Manager GX. You can skip this process if you want, but generally it extends your Wii with little to no downsides.

If you have a Wii mini, use this guide for cIOS instead. Attempting to install other cIOS on a Wii mini will not work. {: .notice--warning}

必要なもの

• A Wii
• An SD card or USB drive
• d2x cIOS Installer

Ensure that if you are using an SD card, the lock switch is in the unlocked position, otherwise you will not be able to select the correct options in the installer. {: .notice--warning}

実行方法

Section I - Downloading

If your Wii has an Internet connection, you may skip this section.
However, If you encounter any errors like net_init failed, net_gethostbyname failed:, or any other issues during the downloading stage this will allow the Wii to skip the downloading step. {: .notice--warning}

If you are not on Windows, you may download & run this script, and it will download the WAD files for you. {: .notice--info}

1. Wiiの電源を切ります。
2. Insert your SD card or USB drive into your computer.
3. On your computer, download NUS Downloader.
4. Copy all files from the NUS Downloader .zip to a folder on your computer.
5. Run NUS Downloader.exe.
6. Navigate to Database > IOS > IOS38, then select v4123.
   • Ensure that "Pack WAD" is checked.
   • Don't check "Patch IOS". That is the cIOS Installer's job.
7. Click Start NUS Download!.
8. Repeat the above steps for IOS56 v5661, IOS57 v5918 and IOS58 v6175.
9. When the process is complete, there will be a folder named titles in the same folder as the NUS Downloader.
10. Open the titles folder and navigate through them until you locate the four WAD files you downloaded.
11. Place each WAD file on the root of your SD card or USB drive.
    • This must be the same device containing the d2x cIOS Installer.

The WAD files should be on your SD card like this: {: .notice--info}

Section II - Installing

1. Copy the apps folder in the d2x-cios-installer .zip to the root of your SD card or USB drive.

2. Reinsert your SD card or USB drive into your console.

3. Wiiの電源を入れます。

4. Homebrew Channelを起動します。

5. Launch d2x cIOS Installer from the list of homebrew.

6. Set everything to match the following:

   Select cIOS <d2x-v11-beta1>
   Select cIOS base <38>
   Select cIOS slot <248>
   Select cIOS revision <65535>
   

   

7. Press A. This will bring you to the slot map:

   

8. Press A again.

   

9. After the installation has finished, you will be brought back to the slot map. Ensure that the slot that was just installed is highlighted green.

   

   If the slot is highlighted red, try install the cIOS again.
   If you are getting an error before/during the downloading stages, press B to exit and continue from Section I. {: .notice--info}

10. Press A. This will return you to the configuration screen.

11. Repeat the previous 5 steps with the following configurations:

    • cIOS 249 Installation

      Select cIOS <d2x-v11-beta1>
      Select cIOS base <56>
      Select cIOS slot <249>
      Select cIOS revision <65535>
      

      

    • cIOS 250 Installation

      Select cIOS <d2x-v11-beta1>
      Select cIOS base <57>
      Select cIOS slot <250>
      Select cIOS revision <65535>
      

      

    • cIOS 251 Installation

      Select cIOS <d2x-v11-beta1>
      Select cIOS base <58>
      Select cIOS slot <251>
      Select cIOS revision <65535>
      

      

12. Once you have finished with all 4 cIOSes, press B to return to the Homebrew Channel.

Continue to Open Shop Channel Installation
Now that your Wii has adequate brick protection, you can install the Open Shop Channel, a trusted repository for homebrew that can be accessed both on and off the Wii. {: .notice--info}