Key issues fixed:
- Progress dialog showing up as white/hanging/getting stuck/unresponsive.
Key changes:
- Progress dialog now shows progress as a function of all files instead of per nca within a file.
- Overwrite existing files will overwrite all files in the selection.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and
Suspended State, Recreates the bootmanager, Initializes Multicore
system.
Occurs when doing a local compile in MSVC build. The compiler I'm using is as below:
Microsoft Visual Studio Community 2019 Preview
Version 16.6.0 Preview 5.0
Fixes this error:
CVTRES : fatal error CVT1100: duplicate resource. type:MANIFEST, name:1, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
I have put 0 since previous name was 1. If have other names in mind, please let me know.
Co-Authored-By: dragios <dragios@users.noreply.github.com>
Previously, we were reading the keys everytime a KeyManager object was created, causing yuzu to reread the keys file multiple hundreds of times when loading the game list.
With this change, it is only loaded once.
On my system, this decreased game list loading times by a factor of 20.
Patch the RomFS with the selected updates before dumping. Previously the resulting RomFS only contained data from the original title.
To dump the RomFS without updates the user can disable the update under Properties before choosing Dump RomFS.
Allows reporting more cases where logic errors may exist, such as
implicit fallthrough cases, etc.
We currently ignore unused parameters, since we currently have many
cases where this is intentional (virtual interfaces).
While we're at it, we can also tidy up any existing code that causes
warnings. This also uncovered a few bugs as well.
Makes popup texts more compact and clear and also links our quickstart guide now.
Also removes OnMenuSelectEmulatedDirectory from the File dropdown, as the action already exists in the Filesystem tab and provides better visual feedback there.
Presentation context always has GL_DRAW_FRAMEBUFFER_BINDING as zero.
There is no need to bind the default framebuffer constantly.
According to Nsight this was using ~0.7ms per frame and it broke
renderdoc captures.
Should fixcitra-emu/citra#4593.
As the issue might not be entirely clear, I'll offer a short explanation from what I understood from it and found from experimentation.
Currently yuzu offers the user the option to change the text that's displayed in the "Name" column in the game list. Generally, it is expected that the items are sorted based on the displayed text, but yuzu would sort them by title instead.
Made it so that an access to SortRole returns the same as DisplayRole.
There shouldn't be any UI changes, only change in behaviour.
Also fixes a bug with directory sorting, where having the directories out of order would enable you to try to "move up" to the addDirectory button, which would crash the emulator.
Co-Authored-By: Vitor K <vitor-k@users.noreply.github.com>
Changes the GraphicsContext to be managed by the GPU core. This
eliminates the need for the frontends to fool around with tricky
MakeCurrent/DoneCurrent calls that are dependent on the settings (such
as async gpu option).
This also refactors out the need to use QWidget::fromWindowContainer as
that caused issues with focus and input handling. Now we use a regular
QWidget and just access the native windowHandle() directly.
Another change is removing the debug tool setting in FrameMailbox.
Instead of trying to block the frontend until a new frame is ready, the
core will now take over presentation and draw directly to the window if
the renderer detects that its hooked by NSight or RenderDoc
Lastly, since it was in the way, I removed ScopeAcquireWindowContext and
replaced it with a simple subclass in GraphicsContext that achieves the
same result
This commit disables the Boxcat backend by default for new users of yuzu.
There's several reasons as to why this is done:
1. Boxcat currently only actually has an impact on 3 games and doesn't influence any core mechanics of them
2. It causes a plethora of issues when enabled such as games like Crash Team Racing, Diablo 3 and Tales of Vesperia not booting at all or hanging
3. It causes https://github.com/yuzu-emu/yuzu/issues/2957 to happen. This makes the configuration menu totally unusable for many Linux users of yuzu
I think those points show that currently the negative impact of Boxcat outweighs its benefits and should therefore be disabled by default.
For users who are eager to use the extra features provided by it, they can still just turn it on in the settings.
This removes the "exit lock" popup from yuzu when pausing a game.
Motivation
The exit lock feature is broken in many ways and doesn't work properly in a lot of games, causing it to appear every time you want to pause the game or stop it, even in places where it wouldn't on Switch.
Additionally, the feature of pausing a game doesn't exist like this on Switch and yuzu should be guaranteed to be deterministic anyway, so pausing the emulation shouldn't be able to interrupt any critical processes in any way.
An implementation of the cemuhook motion/touch protocol, this adds the
ability for users to connect several different devices to citra to send
direct motion and touch data to citra.
Co-Authored-By: jroweboy <jroweboy@gmail.com>
MakeCurrent is a costly (according to Nsight's profiler it takes a tenth
of a millisecond to complete), and we don't have a reason to call it
because:
- Qt no longer signals a warning if it's not called
- yuzu no longer supports macOS
With all of the trivial parts of the memory interface moved over, we can
get right into moving over the bits that are used.
Note that this does require the use of GetInstance from the global
system instance to be used within hle_ipc.cpp and the gdbstub. This is
fine for the time being, as they both already rely on the global system
instance in other functions. These will be removed in a change directed
at both of these respectively.
For now, it's sufficient, as it still accomplishes the goal of
de-globalizing the memory code.
Emulates negative y viewports with ARB_clip_control. This allows us to
more easily emulated pipelines with tessellation and/or geometry shader
stages. It also avoids corrupting games with transform feedbacks and
negative viewports (gl_Position.y was being modified).
- This does not actually seem to exist in the real kernel - games reset these automatically.
# Conflicts:
# src/core/hle/service/am/applets/applets.cpp
# src/core/hle/service/filesystem/fsp_srv.cpp
These two colorful themes are based on the Default and Dark themes, and contain icons that are colored rather than black and white. These icons come from icons8.com and they have been slightly revised by me. I'm pretty sure I was licensed to use them for Citra.
Co-Authored-By: Pengfei Zhu <zhupengfei321@sina.cn>
The speed limiter being a frame limiter is an implmentation detail and can be changed in the future. What user care about is that it limit the emulation speed in genenral (not just graphics but also audio+input)
Co-Authored-By: Weiyi Wang <wwylele@gmail.com>
We can simply enable CMAKE_AUTOUIC and let CMake take care of handling
the UI code generation for targets.
As part of letting CMake automatically handle the header file parsing,
we must not name includes with "ui_*" unless they're related to the
output of the Qt UIC compiler. Because of this, we need to rename
ui_settings, given it would conflict with this restriction.
The JIT is mature enough that this setting can be removed, falling back
to Unicorn only on unsupported architectures. Any missing features from
Unicorn (of which there are extremely few), are mostly
developer-oriented, which most users don't care about.
Features should be coordinated with the JIT, not the interpreter,
anyhow.
Previously, a translated string was being appended onto another string
in a manner that doesn't allow the translator to control where the
appended text is placed. This can be a nuisance for languages where
grammar and text ordering differs from English.
We now append the strings via the format strings themselves, which
allows translators to reorder where the text will be placed.
A normal user shouldn't change this, as it will slow down the emulation and can lead to bugs or crashes. The renaming is done in order to prevent users from leaving this on without a way to turn it off from the UI.
This is more representative of what actually occurs, as web does support remote URLs which wouldn't need a romfs callback. This paves for easy future support of this with a call like 'OpenPageRemote' or similar.
To prepare for translation support, this makes all of the widgets
cognizant of the language change event that occurs whenever
installTranslator() is called and automatically retranslates their text
where necessary.
This is important as calling the backing UI's retranslateUi() is often
not enough, particularly in cases where we add our own strings that
aren't controlled by it. In that case we need to manually refresh the
strings ourselves.
Enforces the use of the proper URL resolution functions. e.g.
url = some_local_path_string;
should actually be:
url = QUrl::fromLocalPath(some_local_path_string);
etc.
This makes it harder to cause bugs when operating with both strings and
URLs at the same time.
Other overloads of start() are considerably much safer to use if we ever
need this in the future and need to pass arguments to the program, given
it contains separate parameters for the program path and the arguments
themselves, whereas this unsafe overload contains both as a single
string.
Given the alternatives are much safer, we can disable this.
We can make this message more meaningful by indicating the location the
screenshot has been saved to. We can also log out whenever a screenshot
could not be saved (e.g. due to filesystem permissions or some other
reason).
Treating it as a u16 can result in a sign-conversion warning when
performing arithmetic with it, as u16 promotes to an int when aritmetic
is performed on it, not unsigned int.
This also makes the interface more uniform, as the layout interface now
operates on u32 across the board.
We can just pass a pointer to GMainWindow directly and make it a
requirement of the interface. This makes the interface a little safer,
since this would technically otherwise allow any random QWidget to be
the parent of a render window, downcasting it to GMainWindow (which is
undefined behavior).
Stays consistent in our code with using Qt's provided mechanisms, and
also properly handles Unicode paths (which file streams on Windows don't
do very well).
Qt uses a signed value to represent indices. We should follow this
convention where applicable to avoid unnecessary sign-conversion
warnings, as well as making it easier to interoperate with other aspects
of Qt.
While we're at it, we can also make a sign-conversion explicit.
critical() is intended for critical/fatal errors that threaten the
overall stability of an application. A user entering a conflicting key
sequence is neither of those.
1. This is something that should be solely emitted by the hotkey dialog
itself
2. This is functionally unused, given there's nothing listening for the
signal.
The previous code was all "smushed" together wasn't really grouped
together that well.
This spaces things out and separates them by relation to one another,
making it easier to visually parse the individual sections of code that
make up the constructor.
A checkbox is able to be tri-state, giving it three possible activity
types, so in the connect call here, it would actually be truncating an
int into a bool.
Instead, we can just listen on the toggled() signal, which passes along
a bool, not an int.
Given the array is a private static array, we can just make it
internally linked to hide it from external code. This also allows us to
remove an inclusion within the header.
SMDH is a metadata format used in some executable formats for the
Nintendo 3DS. Switch executables don't utilize this metadata format, so
this just a holdover from Citra and can be corrected.
Allows the loading screen code to compile with implicit string
conversions disabled.
While we're at it remove unnecessary const usages, and add it to nearby
variables where appropriate.
Renames the members to more accurately indicate what they signify.
"OneShot" and "Sticky" are kind of ambiguous identifiers for the reset
types, and can be kind of misleading. Automatic and Manual communicate
the kind of reset type in a clearer manner. Either the event is
automatically reset, or it isn't and must be manually cleared.
The "OneShot" and "Sticky" terminology is just a hold-over from Citra
where the kernel had a third type of event reset type known as "Pulse".
Given the Switch kernel only has two forms of event reset types, we
don't need to keep the old terminology around anymore.
Nvidia's proprietary driver creates a real OpenGL compatibility profile
without this option, meanwhile Intel (and probably AMD, I haven't tested
it) require that QSurfaceFormat::FormatOption::DeprecatedFunctions is
explicitly enabled.
For similar reasons to the previous change, we move this to a single
function, so we don't need to duplicate the conversion logic in several
places within main.cpp.
Specifies the conversions explicitly to avoid implicit conversions from
const char* to QString. This makes it easier to disable implicit QString
conversions in the future.
In this case, the implicit conversion was technically wrong as well. The
implicit conversion treats the input strings as ASCII characters. This
would result in an incorrect conversion being performed in the rare case
a branch name was created with a non-ASCII Unicode character, likely
resulting in junk being displayed.
Over time our config values have grown quite numerous in size.
Unfortunately it also makes the single functions we have for loading and
saving values more error prone.
For example, we were loading the core settings twice when they only
should have been loaded once. In another section, a variable was
shadowing another variable used to load settings from a completely
different section.
Finally, in one other case, there was an extraneous endGroup() call used
that didn't need to be done. This was essentially dead code and also a
bug waiting to happen.
This separates the section loading code into its own separate functions.
This keeps variables only visible to the code that actually needs it,
and makes it much easier to visually see the end of each individual
configuration group. It also makes it much easier to visually catch bugs
during code review.
While we're at it, this also uses QStringLiteral instead of raw string
literals, which both avoids constructing a lot of QString instances, but
also makes it much easier to disable implicit ASCII to QString and
vice-versa in the future via setting QT_NO_CAST_FROM_ASCII and
QT_NO_CAST_TO_ASCII as compilation flags.
This option allows picking the compatibility profile since a lot of bugs
are fixed in it. We devs will use this option to easierly debug current
problems in our Core implementation.:wq
This is a holdover from Citra, where the 3DS has both
WaitSynchronization1 and WaitSynchronizationN. The switch only has one
form of wait synchronizing (literally WaitSynchonization). This allows
us to throw out code that doesn't apply at all to the Switch kernel.
Because of this unnecessary dichotomy within the wait synchronization
utilities, we were also neglecting to properly handle waiting on
multiple objects.
While we're at it, we can also scrub out any lingering references to
WaitSynchronization1/WaitSynchronizationN in comments, and change them
to WaitSynchronization (or remove them if the mention no longer
applies).
The default constructor will always run, even when not specified, so
this is redundant.
However, the context member can indeed be initialized in the constructor
initializer list.
