Summary:
- We have "--merge", added similar "--squash" for completeness.
- Switched away from (cd .. && ...) pattern which is not functional on Windows.
- Allow a default --onto to be specified, if master isn't the best default for a project.
Test Plan:
- Did --hold --keep dry runs, changes landed properly.
- Set a default onto branch in .arcconfig.
- Ran --merge and --squash together to verify conflict configuration.
Reviewers: btrahan
CC: aran, epriestley
Maniphest Tasks: T124, T1033
Differential Revision: https://secure.phabricator.com/D2001
Summary:
In Mercurial, we figure out if the working copy is dirty with "hg diff", and do a somewhat expensive merge-base / outgoing operation if the relative commit isn't set. We can set the relative commit earlier and avoid some extra work.
We also may incorrectly cache this state (diff from merge-base of outgoing to tip) and pass the wrong rev and file dirty list to the linters.
Test Plan: Made commits which changed (A, B) and then (A). Ran "arc diff tip^". Before this change, observed full outgoing + merge base resolve and both "A" and "B" passed to lint. Observed execution of fewer commands and lint executing against "A" only after this change.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1998
Summary: Obvious error in refactoring code around getCanonicalRevisionName() in D1954.
Test Plan: Ran "arc diff" without looping. Can you verify this fixes your case?
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T1025
Differential Revision: https://secure.phabricator.com/D1970
Summary:
See task. Allow mercurial users to diff with uncommitted changes.
- By default, commit range is merge-base of `hg outgoing` to `.` (dirstate).
- You can get JUST dirstate with `arc diff tip` or similar.
- This ended up being a giant mess various other changes to deal with empty `hg outgoing` and empty dirstate.
Test Plan: Diffed with uncommitted changes, got sensible prompts and results.
Reviewers: Makinde, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T998
Differential Revision: https://secure.phabricator.com/D1954
Summary: We crash and burn right now, trying to launch an interactive editor against a non-tty stdin. Raise a helpful error message instead.
Test Plan: Will run "arc diff --raw --update".
Reviewers: btrahan, yairlivne
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1949
Summary:
- `git rev-parse --verify` "verifies" very valid-looking commit name, not just valid commit names.
- Currently, if we can't find the base rev we'll incorrectly "verify" it and then fail on "git checkout -b <branch> <some bogus commit>".
- Instead, use `git cat-file -t`.
- See similar fix in D1590.
Example:
$ git rev-parse --verify aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Test Plan: Ran "arc patch" in a mismatched local, hit "Y" to branch, got a branch off HEAD instead of an error.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1947
Summary:
In some workflows, we don't have Conduit at all, so we'll fail with a raw exception. Test for conduit presence before trying to make the encoding call.
Also move some "instanceof" logic for updates into RepositoryAPI (factoring, windows compat).
Test Plan: Ran "arc patch --patch some.patch".
Reviewers: 20after4, davidreuss, nh, btrahan
Reviewed By: 20after4
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1935
Summary:
We currently detect the "\" as a change, and may generate a hunk like this, without changes.
@@ -97,4 +98,4 @@
mmm
mmm
mmm
\ No newline at end of file
While "git apply" is OK with this, "patch" is not. Instead, don't detect this as a change (it is always accompanied by - / + if it's a real change).
Test Plan: Successfully applied a previously-failing SVN patch to a file without a terminal newline that had nonlocal changes.
Reviewers: 20after4, nh, btrahan
Reviewed By: 20after4
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1934
Summary:
In cases where a codebase is not UTF-8, we will attempt an conversion,
if an alternative encoding is given/configured.
This is now possible in two ways:
- by configuring one under repository tracking in diffusion
- by passing an --encoding option to the workflow
If the first is not available we will make a conduit call
to do an extra check and see if an encoding is configured directly with
phabricator.
Test Plan:
Tried various diffs with known encodings (mostly ISO-8859-1), and passed
it in, via stdin, or downloaded a known problematic revision from
phabricator, and they applied where they otherwise failed.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T452
Differential Revision: https://secure.phabricator.com/D1880
Summary:
- When users pipe in colorized diffs, strip the colors instead of failing.
- When showing context, show line numbers (we do show 3 lines around the failure, the failure was just on the first line).
- Remove an irrelevant TODO comment (we handle this elsewhere now).
Test Plan: Unit tests.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1887
Summary:
`svn rm $directory` removes the directory and its contents in svn 1.7, whereas
svn 1.6 only removes the directory's contents, so arc diff needs to not try
to read the directory.
Test Plan:
ran arc diff in a svn working copy that had a directory removed (with both
svn 1.6 and svn 1.7) and confirmed that the command did not throw an exception,
and that the removed directory was marked as directory (not a file).
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1889
Summary: svn changed the format of property changes for svn1.7.
Test Plan: arc diff on a working copy with svn property changes
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1885
Summary: @koolvin ran into this and was justifiably confused.
Test Plan: Put some random .php file in src/, ran arc liberate src/, got warned.
Reviewers: btrahan, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1878
Summary:
svn 1.7 reports a rev number of -1 for added files; previous versions
reported a rev number of 0. Interpret nonpositive rev numbers to mean
the file was added.
Test Plan: ran arc diff on an svn1.7 working copy with added files
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1867
Summary: Wanted to double-check that this works properly; it does, but might as well keep the test case.
Test Plan: Ran tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T970
Differential Revision: https://secure.phabricator.com/D1869
Summary: We incorrectly merge array() into empty string, which is later interpreted as "this file is entirely not-executable". Instead, show no coverage information in the UI.
Test Plan: Looked at a README diff with no coverage information, got no UI render.
Reviewers: tuomaspelkonen, btrahan, zeeg
Reviewed By: tuomaspelkonen
CC: aran, epriestley
Maniphest Tasks: T965
Differential Revision: https://secure.phabricator.com/D1863
Summary: Give "arc cover" --rev and paths parameters like "arc lint" and "arc unit".
Test Plan: Ran 'arc cover' with various rev/path things. Ran in SVN to verify it works/fails correctly.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T707
Differential Revision: https://secure.phabricator.com/D1860
Summary:
Resolves crazy stuff like 'HEAD' or '{2001-01-01T01:01:01}' into an
actual revision, with a provided implementation for git.
Test Plan: Tested in a hacky script.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1849
Summary:
svn 1.7 no longer has a .svn directory in every subdirectory of the working
copy, only one in the root of the working copy (like git, except you can still
check out subtrees). Thus, we can't check whether we're in an svn repo by
looking for a .svn directory alongside the .arcconfig file.
Test Plan: ran arc diff in an svn 1.7 working copy where it previously wasn't working
Reviewers: epriestley, btrahan, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1848
Summary:
- Add a lint check for PHP 5.3 features (namespaces, anonymous functions).
- Add unit tests.
- Disable it by default.
- Enable it for us.
Test Plan: Ran unit tests.
Reviewers: btrahan, edward
Reviewed By: edward
CC: aran, epriestley
Maniphest Tasks: T962
Differential Revision: https://secure.phabricator.com/D1846
Summary:
Make lint output look like gcc errors / grep output; a format used by
editors to jump from a compiler error to a file+line of code which
triggered the error.
Test Plan:
In vim, I ran:
:set makeprg=~/checkouts/devtools/arcanist/bin/arc\ lint\ --output\ compiler
Then:
:make
And was able to jump directly to problematic lines of code.
Reviewers: jungejason
Reviewed By: jungejason
CC: aran, edwardspeyer, jungejason, codeblock, tuomaspelkonen, epriestley
Differential Revision: https://secure.phabricator.com/D550
Summary:
This allows for disabling certain PEP8 linter errors by calling
setCustomSeverityMap on an ArcanistPEP8Linter. However, any custom severities
besides disabled will be ignored.
Test Plan: arc lint
Reviewers: epriestley, andrewjcg
Reviewed By: epriestley
CC: jungejason, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1839
Summary: `arc which` and related workflows have supplanted these now-unused mechanisms.
Test Plan: Grepped for chooseRevision() and DifferentialRevisionRef.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1841
Summary: Similar to rARC298ed9cda55d90b755e4dc45d202213e91631888, work around "differential.anonymous-access" issues until we get proper permissions up.
Test Plan: Ran "arc patch" against a "differential.anonymous-acccess" install with a revision argument
Reviewers: btrahan, mbautin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T848
Differential Revision: https://secure.phabricator.com/D1835
Summary: Simpler assert function for asserting a type of exception was raised.
Test Plan: Wrote this for (and tested it with) D1836.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1837
Summary: If a case does not end with break, continue, throw, exit or return and does not have a "fallthrough" comment, raise a warning.
Test Plan: Ran test case; ran linter against all of Phabricator (no hits).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1824
Summary: Linter flipped out on D1817; reign it in.
Test Plan: Ran "arc lint" on D1817, got one message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1818
Summary:
- When you try to "arc patch" a change which adds or removes a trailing newline or alters a file with a trailing newline near the newline, the patch fails because we fail to reconstuct the "\ No newline at end of file" line.
- We don't currently record enough information about these diffs to reconstruct them with a sensible amount of effort. Store the "\ No newline at end of file" line instead of just a flag.
- There are some special rules for these lines; implement them.
NOTE: This causes some display glitching in Differential, but nothing major; I'll fix that in a followup patch.
Test Plan:
- Created a diff which added a trailing newline, removed a trailing newline, and altered a file without a trailing newline near the end of the file.
- Verified that the git version of this patch and the 'arc export --git' version of this patch are (essentially) identical.
- Verified that "arc diff" + "arc patch" can apply these changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T533
Differential Revision: https://secure.phabricator.com/D1810
Summary: good title
Test Plan: ran "arc patch DX" a bunch
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T892
Differential Revision: https://secure.phabricator.com/D1789
Summary: This may raise other types of exceptions, e.g. http/network exceptions, where getErrorCode() is not defined.
Test Plan: Reasoned about beahvior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1804
Summary:
See <https://github.com/facebook/phabricator/issues/97>. Mercurial branch names may contain any characters, but we currently reject branch names with spaces.
NOTE: Mercurial allows you to name branches things like ` ` (five spaces). We do not parse this correctly. Die in a well fire.
Test Plan:
- Added some horrible-but-possible test cases for crazy branch names.
- Unit tests now pass.
Reviewers: btrahan, Makinde, killermonk
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1795
Summary:
On Windows, the PHP function escapeshellarg() replaces '%' with ' ' (space). This is apparently because there is no safe way to escape % inside of strings.
cmd.exe does use "^" as an escape character, so I think replacing "xyz" with "^x^y^z" might work for arbitrary strings (maybe?), or at least some subset of strings, but I don't know cmd.exe well enough to make that call without being concerned I'm introducing a security issue.
Although this patch is dumb, it's certinaly safe, and can only do something wrong if the user has environmental variables like H, P, T, or x01, in which case they're sort of asking for it.
cmd.exe also truncates output on \0, so use \1 as a delimiter instead.
Seriously it's like this thing was written in 1982 and never ever changed.
Test Plan: Created D1783 successfully after applying this patch.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T124
Differential Revision: https://secure.phabricator.com/D1785
Summary: This use of "(cd ..)" is outside of the RepositoryAPI proper (it's when we're trying to figure out which VCS a directory uses) and explodes on Windows.
Test Plan: @koolvin applied this patch manually and got farther than before.
Reviewers: btrahan, Koolvin, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T124
Differential Revision: https://secure.phabricator.com/D1779
Summary:
`arc help` currently prints more than 500 lines and it is hardly usable without ##> arc.help##, ##| less##, ##| grep##, ##| wc -l## or such.
It is even worse with custom commands and options.
This diff changes `arc help` to only list commands with no description (under 100 lines).
It also adds `arc help --full` which maintains the original behavior.
It doesn't change `arc help <command>`.
NOTE: BC break on different levels.
Test Plan:
arc help
arc help --full
arc help help
arc help lint
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1769
Summary:
There's no reason this can't work now, we're just not quite careful enough about definitions.
NOTE: If you use a message which has a revision ID in it already, this will fail in an obtuse way when launching the update editor fails because stdin isn't a tty. I'll clean this all up after T614 is fully sorted.
Test Plan: Ran "arc diff --raw -C HEAD".
Reviewers: btrahan, yairlivne
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1765
Summary:
We currently raise a very confusing error when we hit this case:
Exception: The phutil library '' has not been loaded!
Because of the trickiness of init-order stuff, it's difficult to detect this more explicitly earlier -- instead, just raise a more descriptive error.
Test Plan: Ran "arc unit" in a copy of libphutil other than the one arc loads.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T580
Differential Revision: https://secure.phabricator.com/D1760
Summary:
- When altering the include_path(), use PATH_SEPARATOR (";" on Windows, ":" elsewhere) instead of hard-coded ":".
- Detect missing php_curl.dll extension.
- Use APPDATA instead of HOME for storing .arcrc (the internet implies this is correct?)
- Don't try to do chmod() stuff on Windows; it's not critical and I don't want to figure out how it works.
Test Plan: Was able to run part of some arc commands on Windows.
Reviewers: btrahan, Makinde, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T124
Differential Revision: https://secure.phabricator.com/D1756
Summary:
Otherwise it says after hitting Tab everytime:
> Warning: Invalid argument supplied for foreach() in arcanist/src/workflow/shell-complete/ArcanistShellCompleteWorkflow.php on line 99
Test Plan: arc h<Tab>
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1766
Summary:
- This is simpler and reuses more code than doing "(cd %s && ...)" every time.
- If we have an issue like HGPLAIN, we have one place to fix it now.
- On Windows, the construct "(cd %s && ...)" does not mean what we'd like it to.
Test Plan: Ran "arc diff" in a git repo with this change.
Reviewers: btrahan, Makinde
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T124
Differential Revision: https://secure.phabricator.com/D1761
Summary: Allow the user to pick a revision explicitly if they think they know what they're doing. Similar to "arc amend --revision", etc.
Test Plan: Obviously compells a meta-test.
Reviewers: btrahan, fratrik
Reviewed By: fratrik
CC: aran, epriestley
Maniphest Tasks: T928
Differential Revision: https://secure.phabricator.com/D1753
Summary:
If a user reverts HEAD in the index or working copy, "git diff" shows no changes
and we explode.
Instead, we should simply return no changes; the rest of the lint pipeline
accommodates this correctly.
Test Plan: Reverted HEAD in a working copy, ran "arc lint", got an error.
Applied patch, ran "arc lint", got accurate lint.
Reviewers: Koolvin, btrahan
Reviewed By: Koolvin
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1729
Summary: Missed this in review (D1715), idx() does not operate on strings (maybe
it does in HPHP/i?).
Test Plan: Faked an editable lint warning, ran "arc lint".
Reviewers: Koolvin, andrewjcg, btrahan
Reviewed By: Koolvin
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1728
Summary:
When the user runs "arc diff --create" or triggers it via "arc diff
--auto", prefill the template as best we can.
Test Plan:
Ran "arc diff --auto" with a template commit message in the working
copy under various configurations, results seemed reasonable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley, dmi
Maniphest Tasks: T614
Differential Revision: https://secure.phabricator.com/D1719
Summary:
When a user invokes the update flow from Mercurial, prefill the update message
like we do for Git.
Also add a little caching to improve performance since "hg" execs cost ~100ms.
Test Plan: Updated a Mercurial diff repeatedly, got sensible default message
fills.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T28
Differential Revision: https://secure.phabricator.com/D1718
Summary: See comments. Skip [defaults] in .hgrc when executing commands.
Test Plan: Ran "arc diff" in a mercurial working copy.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T922
Differential Revision: https://secure.phabricator.com/D1707
Summary:
Not too familiar with the patch rendering code, but diff should fix
a few issues:
1) The current didn't seem to handle the case of an insertion only
diff (where the original text is empty). Specifically, it would
still print a replacement line and would merge the line immediately
after the patch location into the patch application.
2) Patches with trailing newlines were rendered with an additional
newline. This appears to be due to using ##explode## to break the
patch into lines.
Test Plan:
1) Verified that this fixed apache license linting for files that had
no license.
2) Checked that this didn't affect trailing-whitespace patch application.
Reviewers: epriestley, aran
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1715
Summary:
Modified the arc diff workflow, introduced new diff properties -
arc:lint-excuse and arc:unit-excuse for respective errors/warnings.
The diff author inputs the explanation in an editor (similar to commit
message).
Task ID: #
Blame Rev:
Test Plan:
Ran sandbox arc on itself with some lint errors and verified that the
Diff property (== user explanation) is being set.
Revert Plan:
Tags:
Reviewers: epriestley, nh
CC: akramer, blair, aran, andreygoder, Girish, epriestley
Differential Revision: https://secure.phabricator.com/D1676
Summary:
When a Differential revision is updated in git, try to find all commit messages
in the range which we haven't already attached and combine them into a default
update message.
This won't work perfectly in a workflow where you rebase //and// stack local
commits, but worst case is that you just have to delete some lines, which is
still probably better overall than losing this information.
Test Plan: Meta-testing in progress.
Reviewers: btrahan, ptarjan
Reviewed By: btrahan
CC: aran, epriestley, davidreuss
Maniphest Tasks: T28
Differential Revision: https://secure.phabricator.com/D1671
Summary: Otherwise, "arc diff --auto" on a branch with the same name as some
other branch you previously used tries to update that revision.
Test Plan: Ran "arc diff --auto" on a "listdocs" branch; arc didn't try to
update D1639.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T614
Differential Revision: https://secure.phabricator.com/D1662
Summary:
Allow users to easily define aliased arc commands. This is easier than making
them muck around with shell stuff, and lets me do stuff like "arc alias adiff
diff -- --auto" so I can test --auto more easily.
There are some limitations here (for example, you can't put --trace in an alias
because it gets parsed too early) but I think it's a reasonable starting point.
Test Plan: Set, listed, removed and used aliases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T896
Differential Revision: https://secure.phabricator.com/D1653
Summary:
Our failure behavior currently sucks. In particular:
- If lint or unit fail (expectedly or unexpectedly), we throw away your
message. omglol sux 2 b u
- If there's a parsing error, we dump the message to 'arc-commit-message' in
CWD and tell you to go deal with it.
This is awful. Improve the behavior:
- Once we read a message, save it in .arc/commit-message so we always have it
if anything goes wrong.
- If that file exists, prompt to read it without any "-F" nonsense.
- If there's a parsing error, tell the user and prompt them to just edit the
file again, showing what they need to fix.
Test Plan: Ran "arc diff --auto" and made a bunch of intentional errors; arc
never screwed me over and was generally fairly pleasant.
Reviewers: btrahan, Makinde
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T614, T895
Differential Revision: https://secure.phabricator.com/D1656
Summary:
Our one Mercurial client doesn't use it (T614) and I moved git off to "arc
land".
This workflow can never work properly for Mercurial without extensions anyway
since it doesn't have --no-ff.
Test Plan: Ran "arc merge" in SVN, git and Mercurial repositories.
Reviewers: btrahan, Makinde
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T614
Differential Revision: https://secure.phabricator.com/D1650
Summary:
I think "arc land" is better than "arc merge" in every case? Make "arc merge"
hg-only (possibly nuke it later, see T614) and point users at "arc land".
Add an explicit "--merge" flag to force --no-ff behavior in mutable reposiories.
Test Plan:
Ran "arc land --hold --merge <feature>" on this branch, got a clean
merge.
Reviewers: fratrik, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1647
Summary:
For some workflows (all Mercurial, all SVN, some git) I eventually want arc to
pick between "arc --create" and "arc --update" automatically.
"arc which" laid the groundwork for this. For now, implement it as an optional
flag because I think there are still some rough edges on this pathway (for
example, handling of commit messages when errors happen).
When 'arc diff --auto' is invoked, guess whether the user meant --create or
--update.
Test Plan: Created this revision with 'arc diff --auto'.
Reviewers: Makinde, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T614
Differential Revision: https://secure.phabricator.com/D1648
Summary: 'cuz the method would fail without authentication! see D1604 for some
discussion on approaches here
Test Plan: ran arc patch and it worked
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, johnduhart
Maniphest Tasks: T856
Differential Revision: https://secure.phabricator.com/D1645
Summary: T854 is hilarious. seriously, what are the odds?
Test Plan: ran arc patch a few times in a row with the same DX and verified
branches were made with expected, differing names
Reviewers: epriestley, fratrik
CC: aran, epriestley
Maniphest Tasks: T854
Differential Revision: https://secure.phabricator.com/D1605
Summary:
I want to use JSON which allows me to automatically open the files in editor.
I also want to apply patches, especially those modifying __init__.php.
I see no reason why these options should be mutually exclusive.
Also output nothing for okay result which is more standard and better parsable.
Test Plan:
arc lint --output json
arc lint --output json --never-apply-patches # same as above
arc lint --output json --apply-patches
Reviewers: aran, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1599
Summary: This is probably just the first step down a long road of not handling
exotic filenames correctly, but if you diff a file named "∆.jpg" it currently
chokes while parsing the diff.
Test Plan: Added minimal failing unit test, fixed parser, test passed.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1592
Summary:
Some linters return absolute path.
It causes separate lint messages for the same file.
Also lint messages aren't properly bound in Phabricator.
I've preferred changing addLintMessage() to fixing all linters because it is
more robust.
Test Plan: arc lint of a file with lint problem from linter using absolute paths
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1589
Summary: These are meaningless / unreachable after D1491 and nonsense after
D1582. Depends on D1579.
Test Plan: Grepped for 'sourcePath' references.
Reviewers: arice, btrahan
Reviewed By: arice
CC: aran, epriestley
Maniphest Tasks: T838
Differential Revision: https://secure.phabricator.com/D1584
Summary: Move toward deprecating "differntial.find". Also update the output to
be more inline with "arc branch".
Test Plan: Ran "arc list", "arc branch".
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, epriestley
Maniphest Tasks: T838
Differential Revision: https://secure.phabricator.com/D1579
Summary:
If you're on A and run "arc land B", run "git checkout A" after
everything's said and done.
Test Plan: Ran "arc land B" from A, got switched back to it.
Reviewers: davidreuss, kdeggelman, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1568
Summary:
- Renamed sanityCheckPatch to sanityCheck
- Move check for clean working copy into sanityCheck
- Execute sanityCheck before executing any other command
Test Plan:
- Run ##arc patch <revision id>## from a dirty working copy
and verify that a usage exception is thrown before the new branch is
created.
- Run ##arc patch <revision id> --force## and verify that it attempts
to create a new branch, apply, and commit the patch.
- Then clean your working copy and verify that ##arc patch <revision
id> works as expected
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T830, T479
Differential Revision: https://secure.phabricator.com/D1546
Summary:
- Show coverage for all files, not just files that have some coverage
information.
- Read file data off disk, under git the "current" data is the data at HEAD,
not the (possibly unstaged/uncommitted) file in the working copy which we
actually ran.
Test Plan: Ran "arc unit --detailed-coverage" on various files.
Reviewers: tuomaspelkonen, btrahan
Reviewed By: tuomaspelkonen
CC: aran, epriestley
Maniphest Tasks: T818
Differential Revision: https://secure.phabricator.com/D1542
Summary:
- Remove "new and experimental" because arc land is super awesome and great.
- Run the 'mark-committed' finalize workflow after pushing for untracked repo
setups.
Test Plan: Ran "arc mark-committed --quiet --finalize 123". Will run "arc land"
on this. so lazy
Reviewers: cpiro, btrahan
Reviewed By: cpiro
CC: aran, epriestley
Maniphest Tasks: T819
Differential Revision: https://secure.phabricator.com/D1538
Summary:
Mark all applicable Arcanist classes as "final", except PhutilLintEngine, which
needs a little finesse.
@jungejason / @nh, does this break any Facebook stuff?
Test Plan: Linter no longer raises warnings. Ran "testEverythingImplemented" in
Phabricator.
Reviewers: btrahan, jungejason, nh
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1519
"@concrete-extensible"
Summary:
See T795. I think ~all classes in the classtree should be "abstract" or "final",
but I provided "@concrete-extensible" if you really have "Rectangle extends
Square extends Shape" or something.
I'm not totally sure this should be enabled globally by default, maybe I should
default it to DISABLED and then enable it for libphutil/arcanist/Phabricator? It
feels like it might be a little overbearing to push on everyone by defualt.
Test Plan: See unit tests.
Reviewers: btrahan, aran, nh, arudolph, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1510
Summary:
Revert of D715, which allowed you to put xhp classes into libphutil libraries.
We're removing support for XHP in resolving T635.
According to @ide, removing this won't break anything.
Test Plan: Straight revert. Grepped for methods.
Reviewers: btrahan, ide, nh, jungejason
Reviewed By: ide
CC: aran, epriestley
Maniphest Tasks: T635
Differential Revision: https://secure.phabricator.com/D1511
Summary:
- Move name helper functions to ArcanistXHPASTLintNamingHook to make it easier
to write custom linters.
- Add test coverage for name functions.
- Add 'variable' and 'global' naming convention tests.
- Expand test cases.
- Improve lint message error when an unexpected message is raised during a
test.
- Remove a defunct XHP lint message.
Test Plan:
- Ran unit tests.
- Ran "arc lint --lintall" on arcanist/.
Reviewers: btrahan, nh, jungejason
Reviewed By: btrahan
CC: johnduhart, aran, epriestley, arudolph
Differential Revision: https://secure.phabricator.com/D1506
Summary:
Check that the base revision is a valid git ref before trying to create a branch
starting at that rev. When arc patch is used in a git repo using the git-svn
bridge, the base reversion is a uri for the svn rev, not a git ref.
Test Plan:
run arc patch on a git-svn repo, run it on a pure git repo, and verify it works
for both
Reviewers: epriestley, btrahan
CC: jungejason, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1505
Summary: You can get this out of reflog, but we can easily just give you the
command in case you want to undo the -D.
Test Plan: Ran "arc land --hold" on this branch, used recovery command to
recover it.
Reviewers: cpiro, btrahan, jungejason
Reviewed By: cpiro
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1504
Summary: Better instructions in the 'git merge' failure case for 'arc land'.
Test Plan: no you test
Reviewers: fratrik, btrahan, jungejason
Reviewed By: fratrik
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1500
Summary:
- Use differential.query, not differential.find.
- Use loadWorkingCopyDifferentialRevisions ("arc which").
- Some general cleanup.
Test Plan:
oh man
$ arc commit --revision 999 # Does not exist
Usage Exception: Revision 'D999' does not exist.
$ arc commit --revision 1 # Exists, not accepted.
Revision 'D1: bleorp' has not been accepted. Commit this revision anyway?
[y/N] y
Committing 'D1: bleorp'...
A locally modified path is not included in this revision:
DERP
It will NOT be committed. Commit this revision anyway? [y/N] y
Done.
$ arc commit --revision 3 # Not mine, from a git repo
You are not the author of 'D3: bloop'. Commit this revision anyway? [y/N]
y
Revision 'D3: bloop' was generated from
'/INSECURE/repos/git-working-copy/', but current working copy root is
'/INSECURE/repos/svn-working-copy/'. Commit this revision anyway? [y/N] y
Committing 'D3: bloop'...
A locally modified path is not included in this revision:
DERP
It will NOT be committed. Commit this revision anyway? [y/N] y
svn: Commit failed (details follow):
svn: '/INSECURE/repos/svn-working-copy/derp' is not under version control
Exception:
Executing 'svn commit' failed!
(Run with --trace for a full exception trace.)
$ arc commit # Nothing accepted
Usage Exception: Unable to identify the revision in the working copy. Use
'--revision <revision_id>' to select a revision.
$ arc commit # Now accepted
Committing 'D1: bleorp'...
Marking revision D1 'bleorp' committed...
Done.
$ svn st # Complicated test for a bizarre SVN edge case
A svnderp
A svnderp/A
A svnderp/B
$ arc diff --create
Linting...
LINT OKAY No lint problems.
Running unit tests...
No unit test engine is configured for this project.
Created a new Differential revision:
Revision URI: http://local.aphront.com/D28
Included changes:
A (dir) svnderp
A svnderp/A
A svnderp/B
$ touch svnderp/C
$ svn add svnderp/C
A svnderp/C
$ arc commit
Usage Exception: Unable to identify the revision in the working copy. Use
'--revision <revision_id>' to select a revision.
$ arc commit --revision 28
Revision 'D28: derp' has not been accepted. Commit this revision anyway?
[y/N] y
Committing 'D28: derp'...
Usage Exception: This commit includes the directory 'svnderp', but it contains
a modified path ('svnderp/C') which is NOT included in the commit. Subversion
can not handle this operation and will commit the path anyway. You need to sort
out the working copy changes to 'svnderp/C' before you may proceed with the
commit.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1491
Summary: I removed the "--interactive" flag since it makes no sense with 'arc
merge --squash', and transposed a space.
Test Plan: Read text.
Reviewers: cpiro, btrahan, davidreuss
Reviewed By: cpiro
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1493
Summary:
Split ArcanistXHPASTLinter::LINT_FORMATTING_CONVENTIONS into seperate
lint names so that each linting rule can be controled sperately
Test Plan:
This shouldn't break anything, if it does we'll know soon enough.
<epriestley> Better things break loudly/obviously I think.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1495
Summary:
This is a fancy version of "land.sh" that uses "git merge --squash" and
"arc which" to cover more cases.
Test Plan:
Ran "arc land" against various repository states (no such branch, not
accepted, valid, etc). Things seemed OK. There are basically an infinite number
of states here so it's hard to test exhaustively.
Reviewers: cpiro, btrahan, jungejason, davidreuss
Reviewed By: davidreuss
CC: zeeg, aran, epriestley, davidreuss
Maniphest Tasks: T787, T723
Differential Revision: https://secure.phabricator.com/D1488
Summary:
- Allow 'arc amend' to identify revisions by hash and branch, so it works with
"arc diff --create".
- Warn when the requested revision is not (apparently) in the working copy.
Test Plan:
Ran "arc amend" in working copies with different states (right
revision, wrong revision, hash/branch identification).
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T723
Differential Revision: https://secure.phabricator.com/D1480
ArcanistRepositoryAPI->loadWorkingCopyDifferentialRevisions()
Summary:
- See T787.
- @cpiro has an immediate use case for this, which is ##arc amend --revision
`arc which --id` --show master## for "git merge --autosquash" or similar.
- For T614, we need this to choose "--create" vs "--update".
- Other workflows should also use this to improve how often we automatically
get things right, particularly in Mercurial and SVN.
Test Plan:
Ran "arc which" in SVN, Git and HG working copies with various flags;
results seemed reasonable.
Reviewers: btrahan, cpiro, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T787
Differential Revision: https://secure.phabricator.com/D1478
Summary: ...basically by adding "getConduitURI" and then falling through to
that, rather than repeating work from the main arc wrapper that setConduitURI in
the first place. The explicit drawback here is the error message gets a little
more vague.
Test Plan:
- arc install-certifate --conduit-uri=https://secure.phabricator.com
// verified that the install flow was going for
https://secure.phabricator.com...!
- arc install-certificate https://secure.phabricator.com
// verified that the install flow was going for
https://secure.phabricator.com...!
- arc install-certificate
// verified that it reverted back to the .arcconfig conduit uri
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Maniphest Tasks: T794
Differential Revision: https://secure.phabricator.com/D1468
Summary:
under git, we now create a branch that is at the patch's base revision if we
know it or whatever the working copy happened to be at if we don't. This diff
also adds the --nobranch flag to disable this new behavior.
Also added an --update flag. When specified, we run the appropriate "update"
command in the VCS. By default this is off.
Finally, tried to give the user more information about what the heck arc just
did to their working copy.
Test Plan:
// verify --update flag works
// -- git
Assume we are at HEAD and we got to HEAD from HEAD^1 via DX
git reset --hard <THE BEGINNING>
arc patch --update DX
// ...versus svn
Assume we are at HEAD and we got to HEAD from HEAD^1 via DX
svn checkout -r 1
arc patch --update DX
// ...versus hg
Assume we are at HEAD and we got to HEAD from HEAD^1 via DX
hg update -r 1
arc patch --update DX
// verify under git a nice branch is made
// -- test where we should get a good name
// -- test where we have a base revision to check out the branch at
Assume we are at HEAD and we got to HEAD from HEAD^1 via DX
git reset --hard HEAD^1
arc patch DX
// verify under git an "okay" branch is made if we can't get "nice"
// -- test where we should get a "bad" name
// -- test where we DON'T have a base revision to check out the branch at
git diff HEAD^1 > ~/example.patch
git reset --hard HEAD^1
arc patch --patch ~/example.patch
// verify --nobranch flag skips the test for git
Assume we are at HEAD and we got to HEAD from HEAD^1 via DX
git reset --head HEAD^1
arc patch --nobranch DX
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T479
Differential Revision: https://secure.phabricator.com/D1459
Summary:
Julien built a really cool static analysis database of our codebase. One
capability is that it can suggest typehints that are not in the code. The
analysis to do this is very expensive, so it can't reasonably be run locally.
But it can remain indexed on a server.
The idea here is to provide a familiar interface to it through arc lint, via a
generic Conduit service call.
In our lint engine, this will probably be gated on --advice for performance.
This will introduce a slight awkwardness in that running with --advice can add
new non-advice lint if the server chooses, but this isn't likely to cause a
practical problem.
Test Plan:
Construct a fake Conduit lint endpoint, attach this linter to it, and see bogus
lint
appear with --advice.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D1462
Summary:
without "nocommit" we commit the patch to the working copy. add the nocommit
flag and this commit does not happen.
making this happen required adding revisionID to arc bundle to fetch the proper
commit message. if we can't get a commit message -- suppose the fetch fails or
the source is self::SOURCE_PATCH, we ask the user for the commit message on the
command line
Test Plan:
git reset --hard <SOME_REV>
arc patch DX, where this got us to <SOME_REV + 1>
observe correct patch committed with correct commit message in working copy
git reset --hard <SOME_REV>
arc patch --nocommit DX, where this got us to <SOME_REV + 1>
observe correct patch landed BUT NOT committed. note "commit message" does not
exist since there isn't a commit...!
git diff HEAD^1 > ~/file.patch
git reset --hard HEAD^1
arc patch --patch ~/file.patch
observe prompted for commit message and patch committed with commit message i
typed in
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T479
Differential Revision: https://secure.phabricator.com/D1450
Summary:
This allows engines to check the canRun method on linters,
which should determine if a linter is configured and can
be run in the current environment.
Test Plan:
Implement a linter with canRun as false, and ensure
it doesnt run.
Ensure all existing linters still run by default.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D1445
Summary:
This cleans up the PEP8 linter to bring it inline
with the new JSHint Linter's level of quality.
It adds a getPEP8Path method which gives the ability
for users to override the pep8 binary with two new
options in .arcconfig:
* lint.pep8.prefix
* lint.pep8.bin
* lint.pep8.options
Test Plan:
Adjust your engine to use the 'ArcanistPEP8Linter' and run
arc lint against Python files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D1440
