Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary:
Fixes T7664. When there are a large number of tasks (400+) with the same subpriority (which can happen if the subpriority features are rarely used), it may take more than 30 seconds to rebalance them.
Make the algorithm more aggressive about rebalancing homogenous blocks of tasks.
This may need to get even fancier, but I'd guess it can process blocks 1-2 orders of magnitude larger, which should be ~all installs.
(If someone still hits issues with this, I'll make it fancier.)
Once a block is rebalanced, it doesn't need to be rebalanced again (at least, not as a whole block) so we basically just need to get over the initial hurdle here and then we're good.
In the worst case, we can provide `bin/maniphest rebalance` or similar and do the rebalance step offline.
And, in any case, we have more test coverage here now.
Test Plan:
- Existing tests.
- New tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D12166
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary: I don't have `hg` yet on my new laptop; we should just skip tests if the user is missing binaries. Add a convenience method to do this.
Test Plan: Got clean `arc unit --everything` with no `hg` installed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11051
Summary: Fixes T6177. Now that we've reframed "Beta" into "Prototype", there's no reason this needs to be in a separate super-hidden class of application anymore.
Test Plan: Saw Releeph available as a normal Prototype application.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6177
Differential Revision: https://secure.phabricator.com/D10550
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Via HackerOne. Chrome (at least) interprets backslashes like forward slashes, so a redirect to "/\evil.com" is the same as a redirect to "//evil.com".
- Reject local URIs with backslashes (we never generate these).
- Fully-qualify all "Location:" redirects.
- Require external redirects to be marked explicitly.
Test Plan:
- Expanded existing test coverage.
- Verified that neither Diffusion nor Phriction can generate URIs with backslashes (they are escaped in Diffusion, and removed by slugging in Phriction).
- Logged in with Facebook (OAuth2 submits a form to the external site, and isn't affected) and Twitter (OAuth1 redirects, and is affected).
- Went through some local redirects (login, save-an-object).
- Verified file still work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10291
Summary:
Currently, we'll try to publish notifications while running tests. This is at best unnecessary and at worst problematic (we don't stub out the server).
For now, just never publish them.
Test Plan: Ran unit tests with notifications enabled but the server down and didn't get a bunch of warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10171
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T603. I had to partially revert this earlier because it accidentally blocked access to Conduit and File data for installs without "policy.allow-public", since the applications are available to "all users" but some endpoints actually need to be available even when not logged in.
This readjusts the gating in the controller to properly apply application visibility restrictions, and then adds a giant pile of unit test coverage to make sure it sticks and all the weird cases are covered.
Test Plan:
- Added and executed unit tests.
- Executed most of the tests manually, by using logged in / admin / public / disabled users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7211
Summary:
Following on from D5938, also need to override the beta setting
so that testApplicationsInstalled passes
Test Plan: testApplicationsInstalled passes
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6001
Summary: Fixes failure in "testApplicationInstalled" if this flag is off (as it is by default).
Test Plan: Ran "testApplicationsInstalled" with this flag off.
Reviewers: garoevans, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5979
Summary:
Normalize the unit test environment by installing all applications.
The immediate issue this fixes is that `testDropUnknownSenderMail` depends on Maniphest being installed. Some possible fixes are:
# Don't rely on the Maniphest mail receiver for the test (e.g., write a stub/dummy/mock receiver).
# Explicitly make sure Maniphest is installed before running the test.
# Normalize the test environment to install all applications.
I don't like (1) much because it turns a pretty good 10 line test into a bunch of stub classes or mock junk. I'll do it if we have more uses after a few more diffs, but so far running these tests against real code hasn't created a dependency mess and we get more coverage.
I don't like (2) much because I think requiring tests to do this will do more harm than good. The number of issues we'll hypothetically uncover by exposing unrealized application interdependencies is probably very small or maybe zero, and they're probably all trivial. But tests with an undeclared but implicit dependency on an application (e.g., Differential tests depend on Differential) are common.
So here's (3), which I think is reasonable.
I also simplified some of this code a little bit, and moved the Application object cache one level down (this was sort of a bug -- installation status is variant across requests).
Test Plan: Added unit test.
Reviewers: wez, btrahan
Reviewed By: wez
CC: aran
Differential Revision: https://secure.phabricator.com/D5938
Summary: Build one fixture total, not one per test case. Depends on D5258.
Test Plan: `arc unit --everything`
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5259
Summary: If `unset($env)` throws then we pop some other environment instead which is impossible to pop later.
Test Plan:
$ arc unit src/infrastructure/env/__tests__ src/applications/calendar/storage/__tests__
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4488
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
When a PhabricatorTestCase dies after creating storage fixtures, it leaves
those storage fixtures around. This doesn't happen often, but when it does
happen it's a pain to cleanup. The --unittest-fixtures option helps automate
that cleanup.
Test Plan:
Ran it with --dryrun, then for real. Became overwhelmed with a Zen like peace
after regarding the tidiness and beauty of SHOW DATABASES.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3858
Summary: I need this shortly and it seems like something we're likely to need more of in the future now that fixtures work.
Test Plan: Ran unit tests. Used this productively in an upcoming diff.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3775
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
Unittest databases are not always destroyed in our setup.
It could be caused by `__destruct()` not called in case of a fatal error.
Test Plan:
arc unit src/applications/calendar/storage/holiday
Reviewers: edward, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2568
Summary:
- Unit tests can request storage fixtures.
- We build one fixture across all tests in the process, which can quickstart (takes roughly 1s to build, 200ms to destroy for me). This is a one-time cost for running an arbitrary number of fixture-based tests.
- We isolate all the connections inside transactions for each test, so individual tests don't affect one another.
Test Plan: Ran unit tests, which cover the important properties of fixtures.
Reviewers: btrahan, vrana, jungejason, edward
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T140
Differential Revision: https://secure.phabricator.com/D2345
Summary: Introduces a scope-guarded way to override the env config, for unit tests which are sensitive to config values.
Test Plan: Ran unit tests.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2237
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary: There are currently two files, but all scripts require both of them,
which is clearly silly. In the longer term I want to rewrite all of this init
stuff to be more structured (e.g., merge webroot/index.php and __init_script__
better) but this reduces the surface area of the ad-hoc "include files" API we
have now, at least.
Test Plan:
- Grepped for __init_env__.php (no hits)
- Ran a unit test (to test unit changes)
- Ran a daemon (to test daemon changes)
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 976
query
Summary:
- Provide an example unit test, and document it.
- Document database isolation better.
- When we issue an unsimulated query to the isolated connection, throw a
helpful message.
- Pygments is complaining about my madeup "lang=demo", change it to
"lang=text".
Test Plan:
- Ran the unit test (sanity check).
- Ran all other unit tests (verify I didn't break isolation).
- Added a queryfx(..., 'SELECT 1') to a test and verified it throws.
- Read the documentation.
Reviewed By: edward
Reviewers: edward, jungejason, tuomaspelkonen, aran
CC: aran, edward
Differential Revision: 773
Summary:
Allow Lisk to be put into process-isolated mode which establishes
only isolated connections. By default, put it into this mode when running
unit tests. Build some simple unit tests around object insertion and
updating.
NOTE: The one flaw in this is that $dao->establishConnection() still
punches through the isolation layer. I need to do an API change to fix this
though so I'm holding it for now. It will probably just rename getConnection()
to establishConnection() and then rename establishConnection() to something
scary like establishLiveExternalConnection().
Test Plan:
Ran unit tests.
Reviewed By: aran
Reviewers: aran, tuomaspelkonen, jungejason
CC: aran, epriestley
Differential Revision: 194
Summary:
This provides a new connection which doesn't connect to
anything, so effects can be isolated to the current process (for
unit testing).
Test Plan:
Ran unit tests.
Reviewed By: aran
Reviewers: aran, tuomaspelkonen, jungejason
CC: aran, epriestley
Differential Revision: 193
