Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20416. Ref T13269. See D20329.
If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.
Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.
Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):
{F6374205}
Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:
{F6374211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20417
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.
Also, pick slightly nicer defaults for status/priority.
Test Plan:
- Created a "Change Status To: X" rule.
- Saved it.
- Edited it.
- Selected "Assign to" for the existing action's dropdown.
- Before: tokenizer filled with nonsense.
- After: tokenizer cleared.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20416
Summary:
Depends on D20414. Ref T13272. Several minor things here:
- Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
- Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
- Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
- Add or remove some icons or something.
Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20415
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Depends on D20411. Ref T13272. Dashboards and panels have new indexes (Ferret and usage edges) that need a rebuild.
For large datasets like commits we have the "activity" flow in T11932, but realistically these rebuilds won't take more than a few minutes on any realistic install so we should be able to just queue them up as migrations.
Let migrations insert a job to basically run `bin/search index --type SomeObjectType`, then do that for dashboards and panels.
(I'll do Herald rules in a followup too, but I want to tweak one indexing thing there.)
Test Plan: Ran the migration, ran `bin/phd debug task`, saw everything get indexed with no manual intervention.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20412
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:
* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.
Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20400
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:
- Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
- Add project tags to the search result list.
- Make the "No Tags" tag a little less conspicious.
Test Plan:
- Indexed dashboards and panels.
- Searched for dashboards and panels via SearchEngine using Ferret "query" field.
- Searched for panels via "Add Existing Panel" datasource typeahead.
- Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
- Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
- Viewed dashboard list, saw project tags.
- Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20411
Summary: Depends on D20409. Ref T13272. Before "ProfileMenu", dashboards were installed on specific objects using this table. Installs are now handled via ProfileMenu and this table no longer has any meaningful readers. Remove references to the table and destroy it.
Test Plan: Grepped for `DashboardInstall`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20410
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.
Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20409
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.
- We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
- We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.
The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.
Test Plan:
- Added panels to a dashboard with "Create New Panel".
- Added panels to a dashboard with "Add Existing Panel".
- Removed panels from a dashboard.
- Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20408
Summary:
Ref T13272. See PHI945. Currently, dashboards tend to break when they have duplicate panels. Partly, this is because all the edit operations operate on a "panelPHID", so there's no way to say "remove the copy of panel X at the bottom of the right-hand column", since the operation is `remove(phid)` and that doesn't point at a specific copy of that panel.
In theory, the code is supposed to prevent duplicate panels, but (a) it doesn't always do this successfully and (b) there's no real reason you can't put duplicate panels on a dashboard if you want. There may even be good reason to do this if you have a "random cat picture" panel or something. Even if you aren't doing this on purpose, it's probably better to let you do it and then fix your mistake by removing the panel you don't want than to prevent the operation entirely.
To simplify this whole mess, I want to just support putting the same panel into multiple places on a dashboard. As a first step, change the storage format so each instance of a panel has a unique "panelKey".
Since each instance of each panel now has its own object, this will also let us give particular instances of panels things like "automatic refresh time" (T5514) or "custom name for this panel on this dashboard" later, if we want. Not clear these are valuable but having this capability can't hurt.
Test Plan:
- `var_dump()`'d the migration, looked at all the results.
- Ran the migration.
NOTE: This breaks dashboards on its own since none of the other code has been changed yet, see followups.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20405
Summary:
Depends on D20398. Ref T13272. Fixes T6018. Previously, panels showed "used on dashboards: x, y", but this did not include cases where a panel was used by another container panel (today, a tab panel).
Do edge indexing when a dashboard or panel is saved, then pull the edges on the Panel page so we can provide a full list of uses.
Test Plan: {F6369289}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T6018
Differential Revision: https://secure.phabricator.com/D20399
Summary:
Depends on D20397. Ref T13272. Similar to the recent "where are Herald rules used" stuff, show which menus Dashboards are installed in.
This is mostly straightforward, except that I pulled some of the Herald logic into a parent class so it could be shared.
Test Plan: {F6369164}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20398
Summary:
Depends on D20396. Ref T13272. Currently, using the dropdowns to edit a tab panel from a dashboard redirects you to the tab panel page.
Instead, redirect back to the context page (usually, a dashboard -- but theoretically a containing tab panel, since you can put tab panels inside tab panels).
Also, fix some JS issues with non-integer panel keys. I've moved panel keys from "0, 1, 2, ..." to having arbitrary keys to make some operations less flimsy/error-prone, but this needs some JS tweaks.
Test Plan: Edited a tab panel from a dashboard, got sent sensibly back to the dashboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20397
Summary:
Ref T13272. In edit mode, tab panels now have a dropdown menu. However, this sort of overrlaps with the actual action of clicking the tab to select it.
Separate these into different click targets so that "select tab X" and "open dropdown menu for X" are different operations.
This is more work than it appears because:
- We have an "action icon" already, used when you put a dashboard on a portal/home to create an "Edit" link. It makes sense to attach dropdowns to this, but it has some hard-coded stuff.
- In applications with a "Create <thing>" in the crumbs (like Maniphest), we may use a dropdown menu if there are multiple create forms available. However, this menu renders in a weird way by reading all the properties out of an actual "View" object and building something else.
- The "list of tabs" stuff shares code with different "list of tabs" navigation used by Diffusion and Instances.
..but I think I fixed everything and didn't break anything.
Test Plan:
- Clicked "select tab" and "open dropdown menu" as separate actions.
- Viewed Diffusion, Maniphest with multiple create forms, Instances.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20396
Summary:
Ref T13275. Add portals to the search index so that:
- they show up in fulltext global search; and
- the typeahead actually uses an index.
Also make them taggable with projects as an organizational aid.
Test Plan: Indexed portals with `bin/serach index`, searched for a portal with "Query", with fulltext search in main menu, with typehead on "Install Dashboard...", changed the name of a portal and searched again to check that the index updates properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20389
Summary:
Ref T13263.
- Make the user profile section of the "Profile" dropdown menu have a transparent background, not a white background. This is a pre-existing issue. This is normally hard to see, but visible on Workboards with custom background colors.
- Fix an alignment issue with the little "V" caret in the search scope dropdown. This is a recent issue caused by some tab-caret CSS I added recently for tabbed dashboard panels.
Test Plan:
Before:
{F6367723}
After:
{F6367724}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20388
Summary:
Depends on D20383. Ref T13272. Fixes T12363. See PHI997. This gets the edit flows for tab panels functional again. They aren't //nice//, and a lot of the workflows are fairly janky: for example, most of them end up with you on the tab panel's page, which isn't useful if you started on a dashboard page.
However, these flows were extremely janky before anyway (see T12363) and I suspect this is a net improvement even though it's a bit of a mess. I anticipate cleaning this up bit-by-bit in future diffs.
Test Plan: {F6366372}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T12363
Differential Revision: https://secure.phabricator.com/D20384
Summary:
Depends on D20382. Ref T13272. When something near the edge of the screen has a dropdown menu, we currently may render the menu offscreen.
Instead, keep the menu onscreen.
(This is happening because I'm adding dropdown menus to tab query panels.)
Test Plan:
Before:
{F6363339}
After:
{F6363340}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20383
Summary:
Depends on D20372. Ref T13272.
- There's a very heavy dropshadow on panels right now that looks out of place. Reduce it a bit.
- Panels currently have unlabeled pencil and trash icons. Turn this into a menu. I'm likely planning to add options like "Change Query..." to this menu to make managing some types of panels easier.
Test Plan: {F6332838}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20373
Summary:
Depends on D20362. Ref T13272. Currently, Dashboards have an "Install Dashboard" flow which is pretty janky and only allows you to install things to the home page.
Instead, allow users to install things to any valid target (home, favorites, portals, projects). This also provides URIs like `dashboard/install/1/home/personal/` which allow you to link users to an "install a dashboard" page; this may or may not get used.
Test Plan: Installed dashboards on home, favorites, projects, and portals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20364
Summary:
See <https://discourse.phabricator-community.org/t/non-functional-actions-menu-on-live-phame-views/2593>. Several layers here:
The "Actions" button is broken because a menu behavior is failing, since we aren't rendering the menu.
When a behavior fails to initialize, catch and log the exception and continue. Previously, we stopped initializing behaviors if any failed, but behaviors are usually independent and continuing with an explicit exception seems reasonable.
Give "JX.log()" some "sprintf()" semantics to make logging the behavior failure easier. We can probably afford these extra 200 bytes now in 2019.
This fixes the button and gives us explicit errors in the log. So far, so good.
Then, when a page won't render chrome, don't try to render the main menu. This fixes the actual errors (we no longer try to initialize menu behaviors for nodes which don't exist).
Completely hide the "Actions" and "Comment" flows if the viewer isn't logged in. Although this isn't completely consistent with other applications, I think it's more appropriate for Phame. In applications like Maniphest, we show a full set of controls (but disable them) so that users who are not currently logged in have a clear path to interact with the content, under the assumption that this is a relatively common workflow. This is probably less common for Phame, where we expect most anonymous viewers not to log in or interact.
Finally, parametrize a one-off border color and add a border under the crumbs at the top of the page.
Test Plan:
- Viewed a "Live" Phame blog post page, clicked "Actions", got a dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20378
Summary:
Depends on D20353. Ref T13275. This is just some small quality-of-life fixes:
- When you add items to menus, they currently go below the "Edit Menu/Manage Menu" links by default. This isn't a very good place for them. Instead, lock "edit" items to the bottom of the menu.
- Lock profile pictures to the top of the menu. This just simplifies things a little.
- Show more iconography hints on the "edit menu items" UI.
- Add a "drag stuff to do things" hint if some stuff can be dragged.
Test Plan:
- Added new items to a Portal, they didn't go to the very bottom. Instead, they went above the "Edit/Manage" links; a sensible place for them.
- Viewed the "edit menu items" screen, saw more hints and visual richness.
- Viewed/edited Home, Projects, Portals, Favorites
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20355
Summary:
Ref T13275. Today, you can build a custom page on the home page, on project pages, and in your favorites menu.
PHI374 would approximately like to build a completely standalone custom page, and this generally seems like a reasonable capability which we should support, and which should be easy to support if the "custom menu" stuff is built right.
In the near future, I'm planning to shore up some of the outstanding issues with profile menus and then build charts (which will have a big dashboard/panel component), so adding Portals now should let me double up on a lot of the testing and maybe make some of it a bit easier.
Test Plan:
Viewed the list of portals, created a new portal. Everything is currently a pure skeleton with no unique behavior.
Here's a glorious portal page:
{F6321846}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20348
Summary:
See PHI1185, which reports a performance issue with "(" in remarkup in certain contexts.
I can't reproduce the performance issue, but I can reproduce the autosuggester incorrectly remaining active and swallowing return characters.
When the user types `(` or `[`, we wait for a prefix for the `((` (Phurl) or `[[` (Phriction) rules. We currently continue looking for that prefix until a character is entered that explicitly interrupts the search.
For example, typing `(xxx<return>` does not insert a return character, because we're stuck on matching the prefix.
Instead, as soon as the user has entered text that we know won't ever match the prefix, deactivate the autocomplete. We can slightly cheat through this by just looking for at least one character of text, since all prefixes are exactly one character long. If we eventually have some kind of `~~@(xyz)` rule we might need to add a more complicated piece of rejection logic.
Test Plan: Typed `(xxx<return>`, got a return. Used `((` and `[[` autosuggest rules normally. Used `JX.log()` to sanity check that nothing too crazy seems to be happening.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20365
Summary: Depends on D20345. Use a narrower layout for very large graphs to save some space.
Test Plan:
Before:
{F6320215}
After:
{F6320216}
This does not affect smaller graphs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20346
Summary:
See downstream <https://phabricator.wikimedia.org/T171648>. The `T123 Task Name` column in graphs can currently fold down to 0 pixels wide.
Although it's visually nice to render this element without a scroll bar when we don't really need one, the current behavior is excessive and not very useful.
Instead, tweak the CSS so:
- This cell is always at least 320px wide.
- After 320px, we'll overflow/ellipsis the cell on small screens.
This generally gives us better behavior:
- Small screens get a scrollbar to see a reasonable amount of content.
- The UI doesn't turn into a total mess if one task has a whole novel of text.
Test Plan:
Old behavior, note that there's no scrollbar and the cell is so narrow it is useless:
{F6320208}
New behavior, same default view, has a scrollbar:
{F6320209}
Scrolling over gives you this:
{F6320210}
On a wider screen (this wide or better), we don't need to scroll:
{F6320211}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20345
Summary:
Fixes T13273. This element is a bit weird, but I think I fixed it without breaking anything.
The CSS is used by project hovercards and user hovercards, but they each have a class which builds mostly-shared-but-not-really-identical CSS, instead of having a single `View` class with modes. So I'm not 100% sure I didn't break something obscure, but I couldn't find anything this breaks.
The major issue is that all the text content has "position: absolute". Instead, make the image "absolute" and the text actual positioned content. Then fix all the margins/padding/spacing/layout and add overflow. Seems to work?
Plus: hide availability for disabled users, for consistency with D20342.
Test Plan:
Before:
{F6320155}
After:
{F6320156}
I think this is pixel-exact except for the overflow behavior.
Also:
- Viewed some other user hovercards, including a disabled user. They all looked unchanged.
- Viewed some project hovercards. They all looked good, too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13273
Differential Revision: https://secure.phabricator.com/D20344
Summary:
See downstream <https://phabricator.wikimedia.org/T201480>. Searching for things on mobile is a significant challenge because clicking the "Magnifying Glass" icon shows and then immediately hides the menu. I believe some aspect of iOS event handling has changed since this was originally written.
At some point, I'd like to rewrite this to work more cleanly and get rid of `jx-toggle-class`. In particular, it isn't smart enough to know that it should be modal with other menus, so you can get states like this by clicking multiple things:
{F6320110}
This would also probably just look and work better if it was an inline element that showed up under the header instead of a floating dropdown element.
However, I'm having a hard time getting the Safari debugger to actually connect to the iOS simulator, so take a small step toward this bright future and fix the immediate problem for now: toggle on click instead of mousedown/touchstart.
This means the menu opens ~100ms later, but actually works. Big improvement!
I'd like to move away from "jx-toggle-class" anyway (it usually isn't sophisticated enough to fully describe a behavior) so reducing complexity here seems good. It isn't used in //too// many places so this is unlikely to have any negative effects, I hope.
Test Plan: On iOS simulator, clicked the magnifying glass icon in the main menu to get a search input. Before: got a search input for a microsecond. After: actually got a search input.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20343
Summary: Ref T13269. Make it visually more clear that the "Trigger" and "New Task / Edit / Bulk" dropdown menu items are buttons, not status icons or indicators of some kind.
Test Plan: {F6313872}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20332
Summary: Ref T13269. I refactored this late in the game to organize things better and add table cells around stuff, and accidentally broke the relationship between the "Rule Type" selector and the value selector.
Test Plan: Switched rule type selector from "Change Status" to "Play Sound", saw secondary control update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20326
Summary:
Depends on D20321. Fixes T12175. Ref T13074. Now that before/after PHIDs are suggestions, we can give the server a more complete view of what the client is trying to do so we're more likely to get a good outcome if the client view is out of date.
Instead of passing only the one directly adjacent card PHID, pass all the card PHIDs that the client thinks are in the same group.
(For gigantic columns with tens of thousands of tasks this might need some tweaking -- like, slice both lists down to 10 items -- but we can cross that bridge when we come to it.)
Test Plan:
- Dragged some cards around to top/bottom/middle positions, saw good positioning in all cases.
- In two windows, dragged stuff around on the same board. At least at first glance, conflicting simultaneous edits seemed to do reasonable things.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20322
Summary:
Depends on D20320. Ref T12175. Ref T13074. Currently, when you move a card between columns, the internal transaction takes exactly one `afterPHID` or `beforePHID` and moves the card before or after the specified card.
This is a fairly strict interpretation and causes a number of practical issues, mostly because the user/client view of the board may be out of date and the card they're dragging before or after may no longer exist: another user might have moved or hidden it between the last client update and the current time.
In T13074, we also run into a more subtle issue where a card that incorrectly appears in multiple columns fatals when dropped before or after itself.
In all cases, a better behavior is just to complete the move and accept that the position may not end up exactly like the user specified. We could prompt the user instead:
> You tried to drop this card after card X, but that card has moved since you last loaded the board. Reload the board and try again.
...but this is pretty hostile and probably rarely/never what the user wants.
Instead, accept a list of before/after PHIDs and just try them until we find one that works, or accept a default position if none work. In essentially all cases, this means that the move "just works" like users expect it to instead of fataling in a confusing/disruptive/undesirable (but "technically correct") way.
(A followup will make the client JS send more beforePHIDs/afterPHIDs so this works more often.)
We could eventually add a "strict" mode in the API or something if there's some bot/API use case for precise behavior here, but I suspect none exist today or are (ever?) likely to exist in the future.
Test Plan:
- (T13074) Inserted two conflicting rows to put a card on two columns on the same board. Dropped one version of it underneath the other version. Before: confusing fatal. After: cards merge sensibly into one consistent card.
- (T12175) Opened two views of a board. Moved card A to a different column on the first view. On the second view, dropped card B under card A (still showing in the old column). Before: confusing fatal. After: card ended up in the right column in approximately the right place, very reasonably.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20321
Summary:
Depends on D20308. Ref T5474. The element which previews what will happen when you drop a task somewhere can cover the bottom part of the rightmost column on a workboard.
To fix this, I'm trying to just fade it out if you put your cursor over it. I tried to do this in a simple way previously (":hover" + "opacity: 0.25") but it doesn't actually work because "pointer-events: none" stops ":hover" from working.
Instead, do this in Javascript. This is a little more complicated but: it works; and we can do the fade when you get //near// the element instead of actually over it, which feels a little better.
Test Plan:
- Shrank window to fairly small size so that the preview could cover up stuff on the workboard.
- Dragged a card toward the rightmost column.
- Before: drop action preview covered some workboard stuff.
- After: preview faded out as my cursor approached.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20320
Summary:
In some cases, we show a limited number of one type of object somewhere else, like "Recent Such-And-Such" or "Herald Rules Which Use This" or whatever.
We don't do a very good job of communicating that these are partial lists, or how to see all the results. Usually there's a button in the upper right, which is fine, but this could be better.
Add an explicit "more stuff" button that shows up where a pager would appear and makes it clear that (a) the list is partial; and (b) you can click the button to see everything.
Test Plan: {F6302793}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20315
Summary:
Ref T5474. In 99% of cases, a separate "archived/active" status for triggers probably doesn't make much sense: there's not much reason to ever disable/archive a trigger explcitly, and the archival rule is really just "is this trigger used by anything?".
(The one reason I can think of to disable a trigger manually is because you want to put something in a column and skip trigger rules, but you can already do this from the task detail page anyway, and disabling the trigger globally is a bad way to accomplish this if it's in use by other columns.)
Instead of adding a separate "status", just track how many columns a trigger is used by and consider it "inactive" if it is not used by any active columns.
Test Plan: This is slightly hard to test exhaustively since you can't share a trigger across multiple columns right now, but: rebuild indexes, poked around the trigger list and trigger details, added/removed triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20308
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T13074. If you hit a prompt on a drop operation (today: MFA; in the future, maybe "add a comment" or "assign this task"), we currently leave the board in a bad semi-frozen state if you cancel the workflow by pressing "Cancel" on the dialog.
Instead, put things back the way they were.
Test Plan: Dragged an MFA-required card, cancelled the MFA prompt, got a functional board instead of a semi-frozen board I needed to reload.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20305
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary: See downstream <https://phabricator.wikimedia.org/T166358>. The notifications menu is missing some CSS to color and style values in stories like "renamed task from X to Y".
Test Plan:
Before:
{F6302123}
After:
{F6302122}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20310
Summary:
Depends on D20277. Ref T10333.
- Put profile icons on "Group by Owner".
- Add a similar "Group by Author". Probably not terribly useful, but cheap to implement now.
- Add "Sort by Title". Very likely not terribly useful, but cheap to implement and sort of flexible?
Test Plan: {F6265396}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20278
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary:
Depends on D20271. Ref T10333. When a column is empty but a board is grouped (by priority, owner, etc) render the headers properly.
When a column has headers, don't apply the "empty" style even if it has no cards. This style just makes some empty space so you can drag-and-drop more easily, but headers do the same thing.
Test Plan: {F6264611}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20272
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20266. Boards currently have several `whateverMap<cardPHID => stuff>` properties, but we can just move these all down into a `CardTemplate`, similar to the recently introduced `HeaderTemplate`.
The `CardTemplate` holds all the global information for a card, and then `Card` is specific for a particular copy in a column. Today, each `CardTemplate` has one `Card`, but a `CardTemplate` may have more than one card in the future (when we add subproject columns).
Test Plan: Viewed workboards in different sort orders and dragged stuff around, grepped for all affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20267
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
These effects feel like they're possibly overkill, since other CSS rules make the selection reticle behave correctly and the implementation is relatively intuitive.
Or not, either way.
Test Plan: Selected text on either side of a 2-up diff, no more opacity effects.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20264
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T13249. See PHI1115. I initially wanted to make `bin/policy unlock --owner <user> H123` work to transfer ownership of a Herald rule, although I'm no longer really sure this makes much sense.
In any case, this makes things a little better and more modern.
I removed the storage table for rule comments. Adding comments to Herald rules doesn't work and probably doesn't make much sense.
Test Plan: Created and edited Herald rules, grepped for all the transaction type constants.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20258
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
Summary:
Depends on D20219. Ref T13258. Ref T11415. Installs sometimes have long-running builds or unimportant builds which they may not want to hold up drafts, affect buildable status, or warn during `arc land`.
Some builds have side effects (like deployment or merging) and are not idempotent. They can cause problems if restarted.
In other cases, builds are isolated and idempotent and generally safe, and it's okay for marketing interns to restart them.
To address these cases, add "Behaviors" to Build Plans:
- Hold Drafts: Controls how the build affects revision promotion from "Draft".
- Warn on Land: Controls the "arc land" warning.
- Affects Buildable: Controls whether we care about this build when figuring out if a buildable passed or failed overall.
- Restartable: Controls whether this build may restart or not.
- Runnable: Allows you to weaken the requirements to run the build if you're confident it's safe to run it on arbitrary old versions of things.
NOTE: This only implements UI, none of these options actually do anything yet.
Test Plan:
Mostly poked around the UI. I'll actually implement these behaviors next, and vet them more thoroughly.
{F6244828}
{F6244830}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T11415
Differential Revision: https://secure.phabricator.com/D20220
Summary:
Ref T13259. An install provided feedback that it wasn't obvious you could click the buttons in this UI.
Make it more clear that these are clickable buttons.
Test Plan:
{F6251585}
{F6251586}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20238
Summary:
See T13253. After D20200 (which changed the task schema) these migrations no longer run, since the PHP code will expect a column to exist that won't exist until a `20190220.` migration runs.
We don't need these migrations, since anyone upgrading through September 2017 gets a "rebuild search indexes" activity anyway (see T11932). Just no-op them.
Test Plan: Grepped for `queueDocumentForIndexing()` in `autopatches/`, removed all of it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20243
Summary:
Ref T5401. Depends on D20201. Add timestamps to worker tasks to track task creation, and pass that through to archive tasks. This lets us measure the total time the task spent in the queue, not just the duration it was actually running.
Also displays this information in the daemon status console; see screenshot: {F6225726}
Test Plan:
Stopped daemons, ran `bin/search index --all --background` to create lots of tasks, restarted daemons, observed expected values for `dateCreated` and `epochArchived` in the archive worker table.
Also tested the changes to `unarchiveTask` by forcing a search task to permanently fail and then `bin/worker retry`ing it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5401
Differential Revision: https://secure.phabricator.com/D20200
Summary:
Depends on D20196. See PHI985. When empty, the "moved/copied" gutter currently renders with the same background color as the rest of the line. This can be misleading because it makes code look more indented than it is, especially if you're unfamiliar with the tool:
{F6225179}
If we remove this misleading coloration, we get a white gap. This is more clear, but looks a little odd:
{F6225181}
Instead, give this gutter a subtle background fill in all casses, to make it more clear that it's a separate gutter region, not a part of the text diff:
{F6225183}
Test Plan: See screenshots. Copied text from a diff, added/removed inlines, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20197
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T13161.
- Don't show ">>" when the line indentation changed but the text also changed, this is just "the line changed".
- The indicator seems a little cleaner if we just reuse the existing "bright" colors, which already have colorblind colors anyway.
Test Plan: Got slightly better rendering for some diffs locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20195
Summary:
Ref T12822. Ref T2495. This is the good version of D20193.
Currently, we display various nonprintable characters (ZWS, nonbreaking space, various control characters) as themselves, so they're generally invisible.
In T12822, one user reports that all their engineers frequently type ZWS characters into source somehow? I don't really believe this (??), and this should be fixed in lint.
That said, the only real reason not to show these weird characters in a special way was that it would break copy/paste: if we render ZWS as "🐑", and a user copy-pastes the line including the ZWS, they'll get a sheep.
At least, they would have, until D20191. Now that this whole thing is end-to-end Javascript magic, we can copy whatever we want.
In particular, we can render any character `X` as `<span data-copy-text="Y">X</span>`, and then copy "Y" instead of "X" when the user copies the node. Limitations:
- If users select only "X", they'll get "X" on their clipboard. This seems fine. If you're selecting our ZWS marker *only*, you probably want to copy it?
- If "X" is more than one character long, users will get the full "Y" if they select any part of "X". At least here, this only matters when "X" is several spaces and "Y" is a tab. This also seems fine.
- We have to be kind of careful because this approach involves editing an HTML blob directly. However, we already do that elsewhere and this isn't really too hard to get right.
With those tools in hand:
- Replace "\t" (raw text / what gets copied) with the number of spaces to the next tab stop for display.
- Replace ZWS and NBSP (raw text) with a special marker for display.
- Replace control characters 0x00-0x19 and 0x7F, except for "\t", "\r", and "\n", with the special unicode "control character pictures" reserved for this purpose.
Test Plan:
- Generated and viewed a file like this one:
{F6220422}
- Copied text out of it, got authentic raw original source text instead of displayed text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822, T2495
Differential Revision: https://secure.phabricator.com/D20194
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary:
Depends on D20179. Ref T13088. See PHI351. See PHI1018. In various cases, unit tests names are 19 paths mashed together.
This is probably not an ideal name, and the test harness should probably pick a better name, but if users are fine with it and don't want to do the work to summarize on their own, accept them. We may summarize with "..." in some cases depending on how this fares in the UI.
The actual implementation is a separate "strings" table which is just `<hash-of-string, full-string>`. The unit message table can end up being mostly strings, so this should reduce storage requirements a bit.
For now, I'm not forcing a migration: new writes use the new table, existing rows retain the data. I plan to provide a migration tool, recommend migration, then force migration eventually.
Prior to that, I'm likely to move at least some other columns to use this table (e.g., lint names), since we have a lot of similar data (arbitrarily long user string constants that we are unlikely to need to search or filter).
Test Plan: {F6213819}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20180
Summary:
Ref T13249. See PHI810. We currently show availability dots in some interfaces (timeline, mentions) but not others (typeheads/tokenizers).
They're potentially quite useful in tokenizers, e.g. when assigning tasks to someone or requesting reviews. Show them in more places.
(The actual rendering here isn't terribly clean, and it would be great to try to unify all these various behaviors some day.)
Test Plan:
{F6212044}
{F6212045}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20173
Summary:
Ref T13249. See PHI1059. This allows "locked" in `maniphest.statuses` to specify that either "comments" are locked (current behavior, advisory, overridable by users with edit permission, e.g. for calming discussion on a contentious issue or putting a guard rail on things); or "edits" are locked (hard lock, only task owner can edit things).
Roughly, "comments" is a soft/advisory lock. "edits" is a hard/strict lock. (I think both types of locks have reasonable use cases, which is why I'm not just making locks stronger across the board.)
When "edits" are locked:
- The edit policy looks like "no one" to normal callers.
- In one special case, we sneak the real value through a back channel using PolicyCodex in the specific narrow case that you're editing the object. Otherwise, the policy selector control incorrectly switches to "No One".
- We also have to do a little more validation around applying a mixture of status + owner transactions that could leave the task uneditable.
For now, I'm allowing you to reassign a hard-locked task to someone else. If you get this wrong, we can end up in a state where no one can edit the task. If this is an issue, we could respond in various ways: prevent these edits; prevent assigning to disabled users; provide a `bin/task reassign`; uh maybe have a quorum convene?
Test Plan:
- Defined "Soft Locked" and "Hard Locked" statues.
- "Hard Locked" a task, hit errors (trying to unassign myself, trying to hard lock an unassigned task).
- Saw nice new policy guidance icon in header.
{F6210362}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20165
Summary:
Ref T13253. Fixes T6615. See that task for discussion.
- Remove three keys which serve no real purpose: `dataID` doesn't do anything for us, and the two `leaseOwner` keys are unused.
- Rename `leaseOwner_2` to `key_owner`.
- Fix an issue where `dataID` was nullable in the active table and non-nullable in the archive table.
In practice, //all// workers have data, so all workers have a `dataID`: if they didn't, we'd already fatal when trying to move tasks to the archive table. Just clean this up for consistency, and remove the ancient codepath which imagined tasks with no data.
Test Plan:
- Ran `bin/storage upgrade`, inspected tables.
- Ran `bin/phd debug taskmaster`, worked through a bunch of tasks with no problems.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13253, T6615
Differential Revision: https://secure.phabricator.com/D20175
Summary:
See PHI1073. Improve the UX here:
- When there are a small number of connected tasks, no changes.
- When there are too many total connected tasks, but not too many directly connected tasks, show hint text with a "View Standalone Graph" button to view more of the graph.
- When there are too many directly connected tasks, show better hint text with a "View Standalone Graph" button.
- Always show a "View Standalone Graph" option in the dropdown menu.
- Add a standalone view which works the same way but has a limit of 2,000.
- This view doesn't have "View Standalone Graph" links, since they'd just link back to the same page, but is basically the same otherwise.
- Increase the main page task limit from 100 to 200.
Test Plan:
Mobile View:
{F6210326}
Way too much stuff:
{F6210327}
New persistent link to the standalone page:
{F6210328}
Kind of too much stuff:
{F6210329}
Standalone view:
{F6210330}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D20164
Summary:
Ref T13249. See PHI774. When users follow an email login link ("Forgot password?", "Send Welcome Email", "Send a login link to your email address.", `bin/auth recover`), we send them to a password reset flow if an install uses passwords.
If an install does not use passwords, we previously dumped them unceremoniously into the {nav Settings > External Accounts} UI with no real guidance about what they were supposed to do. Since D20094 we do a slightly better job here in some cases. Continue improving this workflow.
This adds a page like "Reset Password" for "Hey, You Should Probably Link An Account, Here's Some Options".
Overall, this stuff is still pretty rough in a couple of areas that I imagine addressing in the future:
- When you finish linking, we still dump you back in Settings. At least we got you to link things. But better would be to return you here and say "great job, you're a pro".
- This UI can become a weird pile of buttons in certain configs and generally looks a little unintentional. This problem is shared among all the "linkable" providers, and the non-login link flow is also weird.
So: step forward, but more work to be done.
Test Plan: {F6211115}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20170
Summary: Ref T13249. Poll for Duo updates in the background so we can automatically update the UI when the user clicks the mobile phone app button.
Test Plan: Hit a Duo gate, clicked "Approve" in the mobile app, saw the UI update immediately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20169
Summary:
Depends on D20111. Ref T6703. Currently, each ExternalAccount row is tied to a provider by `providerType` + `providerDomain`. This effectively prevents multiple providers of the same type, since, e.g., two LDAP providers may be on different ports on the same domain. The `domain` also isn't really a useful idea anyway because you can move which hostname an LDAP server is on, and LDAP actually uses the value `self` in all cases. Yeah, yikes.
Instead, just bind each account to a particular provider. Then we can have an LDAP "alice" on seven different servers on different ports on the same machine and they can all move around and we'll still have a consistent, cohesive view of the world.
(On its own, this creates some issues with the link/unlink/refresh flows. Those will be updated in followups, and doing this change in a way with no intermediate breaks would require fixing them to use IDs to reference providerType/providerDomain, then fixing this, then undoing the first fix most of the way.)
Test Plan: Ran migrations, sanity-checked database. See followup changes for more comprehensive testing.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20112
Summary:
Depends on D20140. Ref T13250. Currently, the top-level exception handler doesn't dump stacks because we might not be in debug mode, and we might double-extra-super fatal if we call `PhabricatorEnv:...` to try to figure out if we're in debug mode or not.
We can get around this by setting a flag on the Sink once we're able to confirm that we're in debug mode. Then it's okay for the top-level error handler to show traces.
There's still some small possibility that showing a trace could make us double-super-fatal since we have to call a little more code, but AphrontStackTraceView is pretty conservative about what it does and 99% of the time this is a huge improvement.
Test Plan: {F6205122}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20142
Summary:
Ref T13244. See PHI1059. When you lock a task, users who can edit the task can currently override the lock by using "Edit Task" if they confirm that they want to do this.
Mark these edits with an emblem, similar to the "MFA" and "Silent" emblems, so it's clear that they may have bent the rules.
Also, make the "MFA" and "Silent" emblems more easily visible.
Test Plan:
Edited a locked task, overrode the lock, got marked for it.
{F6195005}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20131
Summary: Ref T13244. See PHI1052. Our error handling for Stripe errors isn't great right now. We can give users a bit more information, and a less jarring UI.
Test Plan:
Before (this is in developer mode, production doesn't get a stack trace):
{F6197394}
After:
{F6197397}
- Tried all the invalid test codes listed here: https://stripe.com/docs/testing#cards
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20132
Summary:
Ref T13244. See PHI1055. (Earlier, see D20091 and PHI1047.) Previously, we expanded the Owners package autoreview rules from "Yes/No" to several "Review (Blocking) If Non-Owner Author Not Subscribed via Package" kinds of rules. The sky didn't fall and this feature didn't turn into "Herald-in-Owners", so I'm comfortable doing something similar to the "Audit" rules.
PHI1055 is a request for a way to configure slightly different audit behavior, and expanding the options seems like a good approach to satisfy the use case.
Prepare to add more options by moving everything into a class that defines all the behavior of different states, and converting the "0/1" boolean column to a text column.
Test Plan:
- Created several packages, some with and some without auditing.
- Inspected database for: package state; and associated transactions.
- Ran the migrations.
- Inspected database to confirm that state and transactions migrated correctly.
- Reviewed transaction logs.
- Created and edited packages and audit state.
- Viewed the "Package List" element in Diffusion.
- Pulled package information with `owners.search`, got sensible results.
- Edited package audit status with `owners.edit`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20124
Summary:
Depends on D20122. Fixes T8029. Adds an "Approve User" action to the "Manage" page.
Users are normally approved from the "Approval Queue", but if you click into a user's profile to check them out in more detail it kind of dead ends you right now. I've occasionally hit this myself, and think this workflow is generally reasonable enough to support upstream.
Test Plan: {F6193742}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8029
Differential Revision: https://secure.phabricator.com/D20123
Summary:
Depends on D20107. Ref T6703. Legalpad currently inserts "email" records into the external account table, but they're never used for anything and nothing else references them.
They also aren't necessary for anything important to work, and the only effect they have is making the UI say "External Account" instead of "None" under the "Account" column. In particular, the signatures still record the actual email address.
Stop doing this, remove all the references, and destroy all the rows.
(Long ago, Maniphest may also have done this, but no longer does. Nuance/Gatekeeper use a more modern and more suitable "ExternalObject" thing that I initially started adapting here before realizing that Legalpad doesn't actually care about this data.)
Test Plan: Signed documents with an email address, saw signature reflected properly in UI. Grepped for other callsites.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20108
Summary:
Depends on D20106. Ref T6703. Since I plan to change the `ExternalAccount` table, these migrations (which rely on `save()`) will stop working.
They could be rewritten to use raw queries, but I suspect few or no installs are affected. At least for now, just make them safe: if they would affect data, fatal and tell the user to perform a more gradual upgrade.
Also remove an `ALTER IGNORE TABLE` (this syntax was removed at some point) and fix a `%Q` when adjusting certain types of primary keys.
Test Plan: Ran `bin/storage upgrade --no-quickstart --force --namespace test1234` to get a complete migration since the beginning of time.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20107
Summary:
Depends on D20041. See PHI1046. If you do this:
- Create a parent project called "Crab" in Space 1.
- Create a milestone called "Left Claw".
- Shift "Crab" to Space 2.
- Create a milestone called "Right Claw".
...you currently end up with "Left Claw" in the wrong `spacePHID` in the database. At the application level it's in the correct space, but when we `WHERE ... AND spacePHID IN (...)` we can incorrectly filter it out.
Test Plan:
- Did the above setup.
- Saved "Crab", saw the space fix itself.
- Put things back in the broken state.
- Ran the migration script, saw things fix themselves again.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20063
Summary:
Ref T13242. See PHI1039. Maniphest subtypes generally seem to be working well. I designed them as a general capability that might be extended to other `EditEngine` objects later, and PHI1039 describes a situation where extending subtypes to projects would give us some reasonable tools.
(Some installs also already use icons/colors as a sort of lightweight version of subtypes, so I believe this is generally useful capability.)
Some of this is a little bit copy-pasted and could probably be shared, but I'd like to wait a bit longer before merging it. For example, both configs have exactly the same structure right now, but Projects should possibly have some different flags (for example: to disable creating subprojects / milestones).
This implementation is pretty basic for now: notably, subprojects/milestones don't get the nice "choose from among subtype forms" treatment that tasks do. If this ends up being part of a solution to PHI1039, I'd plan to fill that in later on.
Test Plan: Defined multiple subtypes, created subtype forms, created projects with appropriate subtypes. Filtered them by subtype. Saw subtype information on list/detail views.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20040
Summary:
Depends on D20026. Ref T13222. Ref T13231. The primary change here is that we'll no longer send you an SMS if you hit an MFA gate without CSRF tokens.
Then there's a lot of support for genralizing into Duo (and other push factors, potentially), I'll annotate things inline.
Test Plan: Implemented Duo, elsewhere.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D20028
Summary:
Depends on D20016. Ref T920. This does nothing interesting on its own since the TOTP provider has no guidance/warnings, but landing it separately helps to simplify an upcoming SMS diff.
SMS will have these guidance messages:
- "Administrator: you haven't configured any mailer which can send SMS, like Twilio."
- "Administrator: SMS is weak."
- "User: you haven't configured a contact number."
Test Plan: {F6151283} {F6151284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20017
Summary:
Depends on D20010. Ref T920. Allow users to designate which contact number is "primary": the number we'll actually send stuff to.
Since this interacts in weird ways with "disable", just do a "when any number is touched, put all of the user's rows into the right state" sort of thing.
Test Plan:
- Added numbers, made numbers primary, disabled a primary number, un-disabled a number with no primaries. Got sensible behavior in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20011
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary:
Ref T13222. Users configure "Factor Configs", which say "I have an entry on my phone for TOTP secret key XYZ".
Currently, these point at raw implementations -- always "TOTP" in practice.
To support configuring available MFA types (like "no MFA") and adding MFA types that need some options set (like "Duo", which needs API keys), bind "Factor Configs" to a "Factor Provider" instead.
In the future, several "Factors" will be available (TOTP, SMS, Duo, Postal Mail, ...). Administrators configure zero or more "MFA Providers" they want to use (e.g., "Duo" + here's my API key). Then users can add configs for these providers (e.g., "here's my Duo account").
Upshot:
- Factor: a PHP subclass, implements the technical details of a type of MFA factor (TOTP, SMS, Duo, etc).
- FactorProvider: a storage object, owned by administrators, configuration of a Factor that says "this should be available on this install", plus provides API keys, a human-readable name, etc.
- FactorConfig: a storage object, owned by a user, says "I have a factor for provider X on my phone/whatever with secret key Q / my duo account is X / my address is Y".
Couple of things not covered here:
- Statuses for providers ("Disabled", "Deprecated") don't do anything yet, but you can't edit them anyway.
- Some `bin/auth` tools need to be updated.
- When no providers are configured, the MFA panel should probably vanish.
- Documentation.
Test Plan:
- Ran migration with providers, saw configs point at the first provider.
- Ran migration without providers, saw a provider created and configs pointed at it.
- Added/removed factors and providers. Passed MFA gates. Spot-checked database for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19975
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
Ref T13222. Long ago, we had a Config option (`welcome.html`) to let you dump HTML onto the login screen, but this was relatively hard to use and not good from a security perspective.
In some cases this was obsoleted by Dashboards, but there's at least some remaining set of use cases for actual login instructions on the login screen. For example, WMF has some guidance on //which// SSO mechanism to use based on what types of account you have. On `secure`, users assume they can register by clicking "Log In With GitHub" or whatever, and it might reduce frustration to tell them upfront that registration is closed.
Some other types of auth messaging could also either use customization or defaults (e.g., the invite/welcome/approve mail).
We could do this with a bunch of Config options, but I'd generally like to move to a world where there's less stuff in Config and more configuration is contextual. I think it tends to be easier to use, and we get a lot of fringe benefits (granular permissions, API, normal transaction logs, more abililty to customize workflows and provide contextual help/hints, etc). Here, for example, we can provide a remarkup preview, which would be trickier with Config.
This does not actually do anything yet.
Test Plan: {F6137541}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19992
Summary:
See PHI1023. Ref T7607. Occasionally, companies need their billing address (or some other custom text) to appear on invoices to satisfy process or compliance requirements.
Allow accounts to have a custom "Billing Name" and a custom "Billing Address" which appear on invoices.
Test Plan: {F6134707}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7607
Differential Revision: https://secure.phabricator.com/D19979
Summary:
Ref T13222. Ref T13231. See PHI912. I'm planning to turn MFA providers into concrete objects, so you can disable and configure them.
Currently, we only support TOTP, which doesn't require any configuration, but other provider types (like Duo or Yubikey OTP) do require some configuration (server URIs, API keys, etc). TOTP //could// also have some configuration, like "bits of entropy" or "allowed window size" or whatever, if we want.
Add concrete objects for this and standard transaction / policy / query support. These objects don't do anything interesting yet and don't actually interact with MFA, this is just skeleton code for now.
Test Plan:
{F6090444}
{F6090445}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D19935
