Summary:
Fixes T13433. Currently, "Login Screen Instructions" in "Auth" are shown only on the main login screen. If you enter a bad password or bad LDAP credential set and move to the flow-specific login failure screen (for example, "invalid password"), the instructions vanish.
Instead, persist them. There are reasonable cases where this is highly useful and the cases which spring to mind where this is possibly misleading are fairly easy to fix by making the instructions more specific.
Test Plan:
- Configured login instructions in "Auth".
- Viewed main login screen, saw instructions.
- Entered a bad username/password and a bad LDAP credential set, got kicked to workflow sub-pages and still saw instructions (previously: no instructions).
- Grepped for other callers to `buildProviderPageResponse()` to look for anything weird, came up empty.
Maniphest Tasks: T13433
Differential Revision: https://secure.phabricator.com/D20863
Summary: Ref T13425. When we render a diff between two source lines, highlight intraline changes.
Test Plan: Viewed a Jupyter notebook with a code diff in it, saw the changed subsequences in the line highlighted.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20851
Summary:
Depends on D20843. Ref T13425. Add very basic support for "Show Hidden Context", in the form of folding it behind an unclickable shield. This isn't ideal, but should be better than nothing.
Prepare for "intraline" diffs on content blocks.
Fix newline handling in Markdown sections in Jupyter notebooks.
Remove the word "visibile" from the codebase.
Test Plan: {F6898192}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20844
Summary:
Ref T13425. Currently, code inputs and all outputs are grouped into a single block. This is fine for display notebooks but not great for diffing notebooks.
Instead, split source code input into individual lines with one line per block, and each output into its own block.
This allows you to leave actual line-by-line inlines on source, and comment on outputs individually.
Test Plan: {F6888583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20840
Summary:
Depends on D20835. Ref T13425. Ref T13414. When a document has a list of content blocks, we may not be able to diff it directly, but we can hash each block and then diff the hashes (internally "diff" also does approximately the same thing).
We could do this ourselves with slightly fewer layers of indirection, but: diff already exists; we already use it; we already have a bunch of abstractions on top of it; and it's likely much faster on large inputs than the best we can do in PHP.
Test Plan: {F6888169}
Maniphest Tasks: T13425, T13414
Differential Revision: https://secure.phabricator.com/D20836
Summary:
Depends on D20834. Ref T13425. After the change from "th" to "td" for accessibility, the algorithm picks which cells it should highlight slightly improperly (it picks too many cells since it can no longer find the line numbers).
Ideally, it would probably highlight //only// the source content, but there isn't an easy way to do this right now. Settle for an incremental improvement for the moment.
Test Plan: Hovered over line numbers, saw a more accurate highlight area.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20835
Summary:
Depends on D20832. Ref T13425. Emit Jupyter notebooks as diffable blocks with block keys.
No diffing or proper inlines yet.
Test Plan: {F6888058}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20833
Summary:
Depends on D20831. Ref T13425. As an escape hatch to get out of future DocumentEngine rendering behavior, provide a "View As.." option.
Now I can break DocumentEngine real bad and no one can complain.
Test Plan: Used "View As" to swap document engines for image files.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20832
Summary:
Depends on D20830. Ref T13425. Have the image engine elect into block rendering, then emit blocks.
This is rough (the blocks aren't actually diffed yet) but image diffs were already pretty rough so this is approximately a net improvement.
Test Plan: Viewed image diffs, saw nothing worse than before.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20831
Summary:
Ref T13410. We currently generate some less-than-ideal anchors in remarkup, but it's hard to change the algorithm without breaking stuff.
To mitigate this, allow `#xyz` to match any target on the page which begins with `xyz`. This means we can make anchors longer with no damage, and savvy users are free to shorten anchors to produce more presentation-friendly links.
Test Plan: Browsed to `#header-th`, was scrolled to `#header-three`, etc.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20820
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary:
Ref T13413. In Chrome 77, workboard cards with titles that must break in the middle of words cause the browser to completely lock up.
Work around the major known instance of this by overriding the "break-word" behavior. This gives us worse rendering for tasks with very long "words" in their titles (they are truncated instead of broken) but fixes the freezing.
Once Chrome is fixed, this can be reverted.
Test Plan:
- Created a task named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" on a workboard.
- Loaded the board in Chrome 77.
- Before: entire page locks up.
- After: smooth sailing, except the "MMMMMM..." is truncated.
Maniphest Tasks: T13413
Differential Revision: https://secure.phabricator.com/D20812
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Fixes T13392. If you have 17 load balancers in sequence, Phabricator will receive requests with at least 17 "X-Forwarded-For" components in the header.
We want to select the 17th-from-last element, since prior elements are not trustworthy.
This currently isn't very easy/obvious, and you have to add a kind of sketchy piece of custom code to `preamble.php` to do any "X-Forwarded-For" parsing. Make handling this correctly easier.
Test Plan:
- Ran unit tests.
- Configured my local `preamble.php` to call `preamble_trust_x_forwarded_for_header(4)`, then made `/debug/` dump the header and the final value of `REMOTE_ADDR`.
```
$ curl http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR =
FINAL REMOTE_ADDR = 127.0.0.1
</pre>
```
```
$ curl -H 'X-Forwarded-For: 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4, 5.5.5.5, 6.6.6.6' http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR = 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4, 5.5.5.5, 6.6.6.6
FINAL REMOTE_ADDR = 3.3.3.3
</pre>
```
```
$ curl -H 'X-Forwarded-For: 5.5.5.5, 6.6.6.6' http://local.phacility.com/debug/
<pre>
HTTP_X_FORWARDED_FOR = 5.5.5.5, 6.6.6.6
FINAL REMOTE_ADDR = 5.5.5.5
</pre>
```
Maniphest Tasks: T13392
Differential Revision: https://secure.phabricator.com/D20785
Summary:
Depends on D20718. Ref T13366. Ref T13367.
- Phortune payment methods currently do not use transactions; update them.
- Give them a proper view page with a transaction log.
- Add an "Add Payment Method" button which always works.
- Show which subscriptions a payment method is associated with.
- Get rid of the "Active" status indicator since we now treat "disabled" as "removed", to align with user expectation/intent.
- Swap out of some of the super weird div-form-button UI into the new "big, clickable" UI for choice dialogs among a small number of options on a single dimension.
Test Plan:
- As a mechant-authority and account-authority, created payment methods from carts, subscriptions, and accounts. Edited and viewed payment methods.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13367, T13366
Differential Revision: https://secure.phabricator.com/D20719
Summary:
Fixes T8830. Fixes T13364.
- The inability to destroy objects from the web UI is intentional. Make this clear in the messaging, which is somewhat out of date and partly reflects an earlier era when things could be destroyed.
- `bin/remove destroy` can't rewind time. Document expectations around the "put the cat back in the bag" use case.
Test Plan: Read documentation, clicked through both workflows.
Maniphest Tasks: T13364, T8830
Differential Revision: https://secure.phabricator.com/D20694
Summary:
Fixes T13363. Currently, these are genuine links which we intercept events for.
Make them pseudolinks instead. Possible alternative approaches are:
- Keep them as genuine links, but mark them as non-navigation links for Quicksand. (But: yuck, weird special case.)
- Keep them as genuine links, and have the dialog handler `JX.Stratcom.pass()` to see if anything handles the event. (But: the "pass()" pattern generally feels bad.)
"Tableaus" or whatever comes out of T10469 some day will probably break everything anyway?
Test Plan:
- Opened the "Edit Related Tasks... > Edit Subtasks" dialog.
- Clicked task title links (not the "open in new window" icon, and not the "Select" button).
- Before: Dialog (sometimes) closed abruptly.
- After: Task is consistently selected as part of the attachment set.
Maniphest Tasks: T13363
Differential Revision: https://secure.phabricator.com/D20693
Summary:
Ref T4900. When a card is edited, we currently emit an update notification for all the projects the task is tagged with. This isn't quite the right set:
- We want to emit notifications for projects the task //was previously// tagged with, so it can be removed from boards it should no longer be part of.
- We want to emit notifications for ancestors of projects the task is or was tagged with, so parent project boards can be updated.
- However, we don't need to emit notifications for projects that don't actually have workboards.
Adjust the notification set to align better to these rules.
Test Plan:
- Removal of Parent Project: Edited a task on board "A > B", removing the "B" project tag. Saw board A update in another window.
- Normal Update: Edited a task title on board X, saw board X update in another window.
- Used `bin/aphlict debug` to inspect the notification set, saw generally sensible-seeming data going over the wire.
Reviewers: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20680
Summary:
Depends on D20654. Ref T4900. When a task is edited, emit a "workboards" event for all boards it appears on (in a future change, this should also include all boards it //previously// appeared on, and all parents of both sets of boards -- but I'm just getting things working for now).
When we receive a "workboards" event, check if the visible board should be updated.
Aphlict has a complicated intra-window leader/follower election system which could let us process this update event exactly once no matter how many windows a user has open with the same workboard. I'm not trying to do any of this since it seems fairly rare. It makes sense for events like "you have new notifications" where we don't want to generate 100 Ajax calls if the user has 100 windows open, but very few users seem likely to have 100 copies of the same workboard open.
Test Plan:
- Ran `bin/aphlict debug`.
- Opened workboard A in two windows, X and Y.
- Edited and moved tasks in window X.
- Saw "workboards" messages in the Aphlict log.
- Saw window Y update in nearly-real-time (locally, this is fast enough that it feels instantaneous).
Then:
- Stopped the Aphlcit server.
- Edited a task.
- Started the Aphlict server.
- Saw window Y update after a few moments (i.e., update in response to a reconnect).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20656
Summary:
Depends on D20653. Ref T4900. Pass ordering details to the reload endpoint so it can give the client accurate ordering/header information in the response.
The removed comment mentions this, but here's why this is a difficult mess:
- In window A, view a board with "Group by: Owner" and no tasks owned by "Alice". Since "Alice" owns no tasks, this means the columns do not have an "Assigned to: Alice" header!
- In window B, edit task T and assign it to Alice.
- In window A, press "R".
Window A now not only needs to update to properly reflect the state of task T, it actually needs to draw a new "Assigned to: Alice" header in every column.
Fortunately, the "group by" code anticipates this being a big mess, is fairly careful about handling it, and the client can handle this state change and the actual code change here isn't too involved. This is just causing a lot of not-very-obvious indirect effects in the pipeline to handle these situations that need complex redraws.
Test Plan:
- After making various normal edits/creates/moves in window A, pressed "R" in window B. Saw ordering reflected correctly after sync.
- Went through the whole "Group by: Owner" + assign to unrepresented owner flow above. After pressing "R", saw "Assigned to: Alice" appear on the board.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20654
Summary:
Depends on D20652. Ref T4900. When the user presses "R", send a list of cards currently visible on the client and their version numbers.
On the server:
- Compare the client verisons to the server versions so we can skip updates for objects which have not changed. (For now, the client version is always "1" and the server version is always "2", so this doesn't do anything meaningful, and every card is always updated.)
- Compare the client visible set to the server visible set and "remove" any cards which have been removed from the board.
I believe this means that "R" always puts the board into the right state (except for some issues with client orderings not being fully handled yet). It's not tremendously efficient, but we can make versioning better (using the largest object transaction ID) to improve that and loading the page in the first place doesn't take all that long so even sending down the full visible set shouldn't be a huge problem.
Test Plan:
- In window A, removed a card from a board.
- In window B, pressed "R" and saw the removal reflected on the client.
- (Also added cards, edited cards, etc., and didn't catch anything exploding.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20653
Summary:
Depends on D20639. Ref T4900. Currently, "BoardResponseEngine" has a `setObjectPHID()` method. This is called after edit operations to mean "we just edited object X, so we know it needs to be updated".
Move toward `setUpdatePHIDs(...)` in all cases, with `setUpdatePHIDs(array(the-object-we-just-edited))` as a special case of that. After this change, callers pass:
- An optional list of PHIDs they know need to be updated on the client. Today, this is always be a card we just edited (on edit/move flows), or a sort of made-up list of PHIDs for the moment (when you press "R"). In the future, the "R" endpoint will do a better job of figuring out a more realistic update set.
- An optional list of PHIDs currently visible on the client. This is used to update ordering details and mark cards for removal. This is currently passed by edit/move, but not by pressing "R" (it will be in the future).
- An optional list of objects. The "R" workflow has to load these anyway, so we can save a couple queries by letting callers pass them. For now, the edit/move flows still rely on the engine to figure out what it needs to load.
This does very little to actually change client behavior, it mostly just paves the way for the next update to the "R" workflow to make it handle add/remove cases properly.
Test Plan:
- Edited and moved cards on a workboard.
- Pressed "R" to reload a workboard.
Neither of these operations seem any worse off than they were before. They still don't fully work:
- When you edit a card and delete the current workboard project from it, it remains visible. This is also the behavior on `master`. This is sort of intentional since we don't necessarily want to make these cards suddenly disappear? Ideally, we would probably have some kind of "tombstone" state where the card can still be edited but can't be dragged, and the next explicit user interaction would clean up old tombstones. This interaction is very rare and I don't think it's particularly important to specialize.
- When a card is removed from the board, "R" can't currently figure out that it should be removed from the client. This is because the client does not yet pass a "visiblePHIDs" state. It will in an upcoming change.
- The "R" flow always sends a full set of card updates, and can not yet detect that some cards have not changed.
- There's a TODO, but some ordering stuff isn't handled yet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20652
Summary:
Depends on D20638. Ref T4900. This is an incremental step toward proper workboard updates.
Currently, the client can mostly update its view because we do updates when you edit or move a card, and the client and server know how to send lists of card updates, so a lot of the work is already done.
However, the code assumes we're only updating/redrawing one card at a time. Make the client accept and process multiple card updates.
In future changes, I'll add versioning (so we only update cards that have actually changed), fix the "TODO" around ordering, and move toward actual Aphlict-based real-time updates.
Test Plan:
- Opened the same workboard in two windows.
- Edited cards in one window, pressed "R" (capital letter, with no modifier keys) to reload the second window.
- Saw edits and moves reflected accurately after sync, except for some special cases of header/order interaction (see "TODO").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20639
Summary:
Ref T13302. The "Close/Cancel" button is currently running two copies of the "dismiss dialog" code, since it's techncally a link with a valid HREF attribute.
An alternate formulation of this is perhaps `if (JX.Stratcom.pass()) { return; }` ("let other handlers react to this event; if something kills it, stop processing"), but `pass()` is inherently someone spooky/fragile so try to get away without it.
Test Plan: Opened the Javascript console, clicked "Edit Task" on a workboard, clicked "Close" on the dialog. Before: event was double-handled leading to a JS error in the console. After: dialog closes uneventfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20640
Summary: Depends on D20637. Ref T4900. This is some ancient dead code that nothing uses.
Test Plan: Grepped for `updateCard()` to verify it's private. Searched for "options" and "dirtyColumn" and got no hits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20638
Summary:
Ref T13302. In at least some browsers (including Safari and Chrome), when you write this:
```
<a href="#">...</a>
```
...and then access `<that node>.href`, you get `http://local-domain-whatever.com/path/to/current/page#` back.
This is wonderful, but not what we want. Access the raw attribute value instead, which is `#` in all browsers.
Test Plan:
- In Safari, Chrome, and Firefox:
- Clicked "Edit Subtasks" from a task.
- Clicked "Select" buttons to select several tasks.
- Before: Clicking these button incorrectly closed the dialog (because of D20573).
- After: Clicking these buttons now selects tasks without closing the dialog.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20590
Summary:
Ref T13302. Currently, if you enable Quicksand (by clicking "Persistent Chat"), open a dialog with links in it (like "Create Subtask" with multiple available subtypes), and then follow a navigation link, the page content reloads behind the dialog but the dialog stays in the foreground.
Fix this by closing dialogs when users click navigation links inside them.
Test Plan:
With Quicksand enabled and disabled, clicked a subtask type in the "Create Subtask" dialog.
- Before, Quicksand Disabled: Dialog stays on screen, then navigation occurs.
- After, Quicksand Disabled: Dialog vanishes, then navigation occurs.
- Before, Quicksand Enabled: Dialog stays on screen, navigation occurs behind it.
- After, Quicksand Enabled: Dialog vanishes, then navigation occurs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20573
Summary:
Ref PHI1275. Previously, see T591. See also T7963. Headers are currently very visually similar to one another, and similar to the text size:
{F6485441}
I think the design intent was to make it hard to make bad-looking documents, but all the headers end up being very samey.
Differentiate the sizes of the headers better so they're much more obvious (e.g., when scrolling through a document) and the different levels are more distinct.
This might be a little overboard, but we can always pull it back a bit if it's too much, and I think giving users more control in Remarkup (in cases where it doesn't create some weird syntax/parsing nightmare) is generally a good thing.
Test Plan: {F6485447}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20569
Summary: Ref T13279. Makes charts incrementally more useful by allowing the server to provide labels and colors for functions.
Test Plan: {F6438872}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20501
Summary:
Ref T13279. Adds client-side support for rendering function labels on charts, then labels every function as important data.
Works okay on mobile, although I'm not planning to target mobile terribly heavily for v0.
Test Plan: {F6438860}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20500
Summary:
Ref T13279. This adds support for:
- Datasets can have types, like "stacked area".
- Datasets can have multiple functions.
- Charts can store dataset types and datasets with multiple functions.
- Adds a "stacked area" dataset.
- Makes D3 actually draw a stacked area chart.
Lots of rough edges here still, but the result looks slightly more like it's supposed to look.
D3 can do some of this logic itself, like adding up the area stacks on top of one another with `d3.stack()`. I'm doing it in PHP instead because I think it's a bit easier to debug, and it gives us more options for things like caching or "export to CSV" or "export to API" or rendering a data table under the chart or whatever.
Test Plan: {F6427780}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20498
Summary:
Ref T13279. Old D3 seems perfectly fine, but most of the good references seem to have been written by people who update D3 more than once every 10 years (???).
This requires some minor API changes, see next diff.
Test Plan: See next diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20497
Summary: Depends on D20486. Ref T13279. Now that the "Reports" UI uses a panel to draw a real chart from Facts, throw away the copy of the old code.
Test Plan: `grep`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20487
Summary:
Depends on D20475. Ref T13272. Currently, if you `JX.Request` with `data` like `{x: null}`, we submit that as `?x=null`, i.e. as though `null` was the string `"null"`.
This is weird and almost certainly never intended/desiarable. In particular, it causes a bug where panels embedded inside tab panels are incorrectly draggable.
It's possible this breaks something which relied on the buggy behavior, but that seems unlikely.
Test Plan: Tried to drag a panel inside a tab panel, it really truly didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20476
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.
Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.
Also fix a leftover typo from D20435.
Test Plan: Viewed a legacy Maniphest burnup rate report.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20449
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.
Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.
Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.
Test Plan:
- Loaded a chart, saw it load data asynchronously.
- Resized the window, saw the chart resize.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20440
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20416. Ref T13269. See D20329.
If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.
Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.
Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):
{F6374205}
Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:
{F6374211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20417
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.
Also, pick slightly nicer defaults for status/priority.
Test Plan:
- Created a "Change Status To: X" rule.
- Saved it.
- Edited it.
- Selected "Assign to" for the existing action's dropdown.
- Before: tokenizer filled with nonsense.
- After: tokenizer cleared.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20416
Summary:
Depends on D20414. Ref T13272. Several minor things here:
- Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
- Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
- Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
- Add or remove some icons or something.
Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20415
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:
* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.
Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20400
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:
- Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
- Add project tags to the search result list.
- Make the "No Tags" tag a little less conspicious.
Test Plan:
- Indexed dashboards and panels.
- Searched for dashboards and panels via SearchEngine using Ferret "query" field.
- Searched for panels via "Add Existing Panel" datasource typeahead.
- Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
- Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
- Viewed dashboard list, saw project tags.
- Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20411
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.
Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20409
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.
- We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
- We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.
The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.
Test Plan:
- Added panels to a dashboard with "Create New Panel".
- Added panels to a dashboard with "Add Existing Panel".
- Removed panels from a dashboard.
- Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20408
Summary:
Depends on D20398. Ref T13272. Fixes T6018. Previously, panels showed "used on dashboards: x, y", but this did not include cases where a panel was used by another container panel (today, a tab panel).
Do edge indexing when a dashboard or panel is saved, then pull the edges on the Panel page so we can provide a full list of uses.
Test Plan: {F6369289}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T6018
Differential Revision: https://secure.phabricator.com/D20399
Summary:
Depends on D20397. Ref T13272. Similar to the recent "where are Herald rules used" stuff, show which menus Dashboards are installed in.
This is mostly straightforward, except that I pulled some of the Herald logic into a parent class so it could be shared.
Test Plan: {F6369164}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20398
