Summary: Ref T10004. I missed these previously, so they didn't work quite right. Restore them to glory.
Test Plan: Edited remarkup and text custom fields on an Owners package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14821
Summary:
Ref T9994. This fixes the first issue discussed on that task, which is that when a merge fails after "arc land", we would not clean up all the leases properly.
Specifically, when a merge fails, we use `queueTask()` to schedule a followup task. This followup destroys the lease and frees the underlying resource.
However, the default behavior of `queueTask()` is to //not queue tasks// if the parent task fails. This is a reasonable, safe behavior that was originally introduced in D8774, where it kept us from sending too much mail if a task did "send some mail" and then failed a little later on and got retried.
Since I think the default behavior is correct, I just special cased the behavior for Drydock to make it queue even on failure. These are the only types of followup tasks we currently want to queue on main task failure.
(It's possible that future Blueprints might want some kind of more specialized behavior, where some tasks queue only on success, but we can cross that bridge when we come to it.)
Test Plan:
- See T9994#149878 for test case setup.
- I ran that test case again with this patch, and saw the followup task queue properly in the `--trace` log, a correspoinding update task show up in `/daemon/`, and the lease get destroyed when I ran it a moment later.
{F1029915}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14818
Summary:
Ref T10004. Fixes T5158. There was a long-standing issue with defaults not working properly, but EditEngine has made it more obvious because it's a lot easier to set defaults now.
The issue is basically that the defaults are getting set as the field's real value early on, so when we go to generate the transaction "old value" later, we build a transaction that uses the //new// value as both the "new value" and "old value". Then the engine says "you didn't change anything, so I'm going to ignore this" and drops it.
To fix this, return `null` as the "old value" by default, and add a call to overwrite that after we load a legitimate old value.
This fix is a touch iffy, but I have some grand plans to clean up the CustomField stuff more broadly later on.
Test Plan:
- Set config defaults on select/typeahead fields, created and edited tasks.
- Set form defaults on select/typehaead fields, created and edited tasks.
- In all cases, transactions and state accurately reflected edits.
- Set defaults on //hidden// fields, verified forms respected them correctly.
- This does generate some fluffy transactions, but I'll deal with those in T7661.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5158, T10004
Differential Revision: https://secure.phabricator.com/D14809
Summary:
Fixes T6864. This creates a sort of busy menu but I think that's proably fine -- users are opting into activating these fields for search anyway.
In the future, we could refine this as, e.g.:
- don't show these options in the dropdown;
- do show them on some new "http prefilling" sort of page;
- then you access them as an advanced user with `?order=secret-magic`.
But I'm not going to bother for now.
Test Plan: Ordered by an int field, then reversed the order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6864
Differential Revision: https://secure.phabricator.com/D14800
Summary:
Ref T9964. Three goals here:
- Make it easier to supply Conduit documentation.
- Make automatic documentation for `*.edit` endpoints more complete, particularly for custom fields.
- Allow type resolution via Conduit types, so you can pass `["alincoln"]` to "subscribers" instead of needing to use PHIDs.
Test Plan:
- Viewed and used all search and edit endpoints, including custom fields.
- Used parameter type resolution to set subscribers to user "dog" instead of "PHID-USER-whatever".
- Viewed HTTP parameter documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14796
Summary: Ref T9964. This just adds more structure to application fields, to make it harder to make typos and easier to validate them later.
Test Plan: Viewed APIs, called some APIs, saw good documentation and correct results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14776
Summary:
Ref T9964. Fill in more parameter types and descriptions.
(No date support yet since it's a bit more involved.)
Test Plan: {F1024022}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14766
Summary:
Ref T9964. ApplicationSearch currently has a bunch of hard-coded `if ($object instanceof thing)` stuff.
Pull that out so it can live in extensions.
Test Plan:
- Searched by spaces, subscribers, projects.
{F1023921}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14764
Summary:
Ref T9964. Adds a new-style "owners.search" endpoint, and an extension for customfields.
Puts enough indirection in place to give us nice, consistent "custom.key" user-facing keys instead of "std:custom:owners:na0shf9a8dfdsafl" junk.
Test Plan:
- Searched Owners via API.
- Searched by ID.
- Ordered by custom fields.
- Reviewed API docs.
- Used normal search with ordering.
- Viewed custom field values in search results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14758
Summary:
Fixes T9945. This is straightforward.
The two sub-object types are very lightweight so I just deleted them directly instead of loading + delete()'ing (or implementing DestructibleInterface on them, which would require they have PHIDs).
Also improve a US English localization.
Test Plan:
- Used `bin/remove destroy PHID-... --trace` to destroy a package.
- Verified it was gone.
- Inspected the SQL in the log for general reasonableness.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9945
Differential Revision: https://secure.phabricator.com/D14729
Summary: Fixes T9919. We were missing feed strings and US English localizations for some of this stuff.
Test Plan:
Before:
{F1018877}
After:
{F1018879}
{F1018880}
{F1018881}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9919
Differential Revision: https://secure.phabricator.com/D14721
Summary: Fixes T9851. I'll hold this for a while to give users some time to update per T9860.
Test Plan:
Edited a task via:
- Conduit
- Comments field
- Edit form
- New task form
Reviewers: chad
Reviewed By: chad
Subscribers: Krenair
Maniphest Tasks: T9851
Differential Revision: https://secure.phabricator.com/D14576
Summary:
Fixes T9920. When hiding changes, tell users why so they can learn the comment rule (usually, "Changes from before your most recent comment are hidden."; sometimes they're hidden for pagination reasons).
Also use "Show Older Comments" instead of "Show older comments." for the action since I think it's a little more consistent to use title case for links/actions?
Test Plan:
- Viewed a task with a lot of comments, saw a "most recent comment" element.
- Artificially set page size to 3, saw a "lots of changes" hide.
- Grepped for removed string.
- Clicked both "show older stuff" links.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9920
Differential Revision: https://secure.phabricator.com/D14719
Summary:
Ref T9132. Ref T9908. Fixes T5622. This allows you to copy some fields (projects, subscribers, custom fields, some per-application) from another object when creating a new object by passing the `?template=xyz` parameter.
Extend "copy" support to work with all custom fields.
Test Plan:
- Created new pastes, packages, tasks using `?template=...`
- Viewed new template docs page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5622, T9132, T9908
Differential Revision: https://secure.phabricator.com/D14699
Summary:
Ref T9132. When I've touched `PhabricatorApplication` I keep hitting this bad `pht()` junk.
The warning is correct, these strings are not extactable and can not be translated.
Fix it so they can be extracted and translated.
Broadly, in all cases we want to render one of these:
> 95 Things (for fewer than some limit)
> 99+ Things (when we hit the limit)
Test Plan: Looked at homepage status counts, moused over them, saw reasonable strings. Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Subscribers: joshuaspence
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14638
Summary:
Ref T9132. Give most standard custom fields reasonable Conduit support so you can use the new `application.x` endpoints to set them.
Major missing field type is dates, again.
Test Plan: Used Conduit to set various custom fields on a package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14635
Summary:
Ref T9132. This allows you to prefill custom fields with `?custom.x.y=value`, for most types of custom fields.
Dates (which are substantially more complicated) aren't supported. I'll just do those once the dust settles. Other types should work, I think.
Test Plan:
- Verified custom fields appear on "HTTP Parameters" help UI.
- Used `?x=y` to prefill custom fields on edit form.
- Performed various normal edits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14634
Summary:
Ref T9132. This isn't perfect, but doesn't break any existing functionality. This stuff works:
- Editing values.
- Reordering fields.
- All builtin field tyepes.
This stuff may not work yet:
- Assigning custom field defaults.
- Some conduit stuff.
- Fully custom fields?
- Locking/hiding fields? Didn't actually test this one.
I'll keep chipping away at that stuff. In some cases, it may be easier to convert all the CustomField apps first, although Differential might be a fair bit of work.
Test Plan:
Created a bunch of custom fields of every avialable type and edited them.
{F1008789}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14617
Summary: Fixes T9715. Adds a MySQL-based lock to ensure that schema migrations are not applied on multiple hosts simultaneously.
Test Plan: Ran `./bin/storage upgrade` concurrently. One invocation was successful whilst the other hit a `PhutilLockException`.
Reviewers: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9715
Differential Revision: https://secure.phabricator.com/D14463
Summary: This logic is flipped.
Test Plan:
- Before change: ran `bin/phd debug task`, saw queries to the config table every second.
- After change: ran `bin/phd debug task`, saw queries to the config table every 10 seconds.
Reviewers: chad, joshuaspence
Reviewed By: chad, joshuaspence
Differential Revision: https://secure.phabricator.com/D14542
Test Plan:
I didn't put any skill points in spelling since I need
combat skills to survive in a nuclear wasteland, but spell check says
this is better.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14522
Summary:
Fixes T9808.
An instance imported a very large repository, generating approximately 4 million tasks over the course of a few days. A week later, these tasks started expiring and became candidates for garbage collection.
The GC works by deleting 100 rows at at time over and over again. It finds the rows it's going to delete by querying for old rows.
Currently, this query generates a `WHERE dateCreated < X ORDER BY id DESC` query. This query can not efficiently execute using a single key, because it relies on `dateCreated` order to find the rows, then on `id` order to sort them. With a table with 4M rows, this is slow.
This would still be OK, except that the query has to execute a lot of times since it only deletes 100 rows each time. Particularly, it needs to execute a total of ~40K times.
Instead, generate `WHERE dateCreated < X ORDER BY dateCreated DESC, id DESC`. This should have the same effect in general and the GC definitely doesn't care about the difference, but it should be more efficient at large scales.
Test Plan:
I had to `TRUNCATE` the problem table so I don't have a perfect repro to completely convincingly test this anymore. Both queries behave fine at small scales, which is why we haven't seen this before.
I was able to run the newer query in production before I nuked the table and have it complete in a reasonable amount of time, while the old query hung longer than I wanted to wait (several minutes?). The query plan for the new query was also a good one, while the query plan for the old query was terrible.
I loaded the daemon console and ran `bin/garbage collect --collector worker.tasks --trace`. I verified the queries looked reasonable and produced reasonable results in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9808
Differential Revision: https://secure.phabricator.com/D14505
Summary: Some linter messages, such as those produced by `ArcanistPHPCompatibilityXHPASTLinterRule`, contain backticks but are currently rendered as Remarkup literals. I think that it is generally desirable to allow lint messages to be rendered as Remarkup, although we should ideally have a way to render Remarkup for use on the command line (I actually think that this already exists, but I don't think that `arc lint` does this when rendering linter messages).
Test Plan: Resubmitted D14481 to my dev install and saw Remarkuped lint messages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14485
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary: Fixes T7053. Depends on D14452.
Test Plan:
Created a custom daemon which dumps out the config hash (by querying `PhabricatorEnv::calculateEnvironmentHash()`). Ran this daemon with `./bin/phd debug PhabricatorDebugDaemon` and saw the config hash update within 30 seconds.
{P1886}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14458
Summary: Adds some basic style to new !!Remarkup Highlighter!! Ref T5560
Test Plan: Wait for next diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5560
Differential Revision: https://secure.phabricator.com/D14383
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Fixes T9273. Remarkup has reasonably good fundamentals but the API is a giant pain to work with.
Provide a `PHUIRemarkupView` to make it easier. This object is way simpler to use by default.
It's not currently as powerful, but we can expand the power level later by adding more setters.
Eventually I'd expect to replace `PhabricatorRemarkupInterface` and `PhabricatorMarkupOneOff` with this, but no rush on those.
I converted a few callsites as a sanity check that it works OK.
Test Plan:
- Viewed remarkup in Passphrase.
- Viewed remarkup in Badges.
- Viewed a Conduit method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9273
Differential Revision: https://secure.phabricator.com/D14289
Summary: Fixes T9573. This incorrectly affected Phriction. I could restore it for only projects, but you didn't like the rule very much anyway and I don't feel strongly about it.
Test Plan: Unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9573
Differential Revision: https://secure.phabricator.com/D14287
Summary:
Ref T182. This allows you to assign blueprints that a repository can use to perform working copy operations. Eventually, this will support "merge this" in Differential, etc.
This is just UI for now, with no material effects.
Most of this diff is just taking logic that was in the existing "Blueprints" CustomField and putting it in more general places so Diffusion (which does not use CustomFields) can also access it.
Test Plan:
- Configured repository automation for a repository.
- Removed repository automation for a repository.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14259
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9551. To set things up:
- Name a project `aa bb`. This will have the tag `aa_bb`.
- Try to visit `/tag/aa%20bb`.
Here's what happens now:
- You get an Aphront redirect error as it tries to add the trailing `/`. Add `phutil_escape_uri()` so that works again.
- Then, you 404, even though this tag is reasonably equivalent to the real project tag and could be redirected. Add a fallback to lookup, resolve, and redirect if we can find a hit for the tag.
This also fixes stuff like `/tag/AA_BB/`.
Test Plan: Visited URIs like `/tag/aa%20bb`, `/tag/aa%20bb/`, `/tag/Aa_bB/`, etc. None of them worked before and now they all do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14260
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary: Fixes T9538. Ref T9408. `cowsay` and `figlet` Remarkup rules are being mangled in HTML mail right now. Put them in <pre> to unmangle them.
Test Plan:
Sent myself a cow + figlet in mail.
Used `bin/mail show-outbound --id ... --dump-html > dump.html` + open that HTML file in Safari to preview HTML mail.
Saw linebreaks and monospaced formatting.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9538, T9408
Differential Revision: https://secure.phabricator.com/D14248
Summary: Ref T9514. I missed these when I swapped out the console stuff recently.
Test Plan: Ran `bin/storage probe`, saw bold instead of escape sequences.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9514
Differential Revision: https://secure.phabricator.com/D14240
Summary:
Ref T9252. Currently, `queueTask()` accepts `$priority` as its third argument. Allow it to take a full range of `$options` instead. This API just never got updated after we expanded avialable options.
Arguably this whole API should be some kind of "TaskQueueRequest" object but I'll leave that for another day.
Test Plan:
- Grepped for `queueTask()` and verified no other callsites are affected by this API change.
- Ran some daemons.
- See also next diff.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14235
Summary:
Ref T9252. Currently, Harbormaster and Drydock work like this in some cases:
# Queue a lease for activation.
# Then, a little later, save the lease PHID somewhere.
# When the target/resource is destroyed, destroy the lease.
However, something can happen between (1) and (2). In Drydock this window is very short and the "something" would have to be a lighting strike or something similar, but in Harbormaster we wait until the resource activates to do (2) so the window can be many minutes long. In particular, a user can use "Abort Build" during those many minutes.
If they do, the target is destroyed but it doesn't yet have a record of the artifact, so the artifact isn't cleaned up.
Make these things work like this instead:
# Create a new lease and pre-generate a PHID for it.
# Save that PHID as something that needs to be cleaned up.
# Queue the lease for activation.
# When the target/resource is destroyed, destroy the lease if it exists.
This makes sure there's no step in the process where we might lose track of a lease/resource.
Also, clean up and standardize some other stuff I hit.
Test Plan:
- Stopped daemons.
- Restarted a build in Harbormaster.
- Stepped through the build one stage at a time using `bin/worker execute ...`.
- After the lease was queued, but before it activated, aborted the build.
- Processed the Harbormaster side of things only.
- Saw the lease get destroyed properly.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14234
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary: Ref T9494. Depends on D14216. Remove 10 copies of this code.
Test Plan: Ran `arc unit --everything`, browsed Config > Modules, clicked around Herald / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14217
Summary:
Ref T9252. This primarily allows Harbormaster to request (and Drydock to fulfill) working copies with a patch from a staging area. Doing this means we can do builds on in-review changes from `arc diff`.
This is a little cobbled-together but should basically work.
Also fix some other issues:
- Yielded, awakend workers are fine to update but could complain.
- We can't log slot lock failures to resources if we don't end up saving them.
- Killing the transaction would wipe out the log.
- Fix some TODOs, etc.
Test Plan: Ran Harbormaster builds on a local revision.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14214
Summary:
Ref T9252. This is the same as D14201, but for lease stuff instead of resource stuff.
This one is a little heavier but still feels pretty reasonable to me at the end of the day (worker is <1K lines and has a ton of comment stuff).
Also fixes a few random bugs I hit in the task queue.
Test Plan:
- Restarted some Harbormaster builds, saw them go through cleanly.
- Released pre-activation resources/leases.
- Probably still kinda buggy but I'll iron the details out over time.
Logs are starting to look somewhat plausible:
{F855747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14202
Summary:
Fixes T9479. Currently, `@aaaaaaaa` may try to match as a commit hash, and `@C123456` may try to match as a Countdown reference. These should only match as user mentions.
Prevent object mention rules from matching after `@`. We already prevent them after `-` and `#`, and already prevented the username rule after `@` (i.e., preventing `@@user`).
Test Plan:
Created some "interesting" users locally and `@mentioned` them:
{F850779}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9479
Differential Revision: https://secure.phabricator.com/D14186
Summary:
Ref T9123. The handling in D14183 didn't deal with new field values properly.
Make all this handling more consistent.
Test Plan: Created a new WorkignCopy build plan with some repos.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14184
Summary:
Ref T9123. To run upstream builds in Harbormaster/Drydock, we need to be able to check out `libphutil`, `arcanist` and `phabricator` next to one another.
This adds an "Also Clone: ..." field to Harbormaster working copy build steps so I can type all three repos into it and get a proper clone with everything we need.
This is somewhat upstream-centric and a bit narrow, but I don't think it's totally unreasonable, and most of the underlying stuff is relatively general.
This adds some more typechecking and improves data/type handling for custom fields, too. In particular, it prevents users from entering an invalid/restricted value in a field (for example, you can't "Also Clone" a repository you don't have permission to see).
Test Plan: Restarted build, got a Drydock resource with multiple repositories in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14183
Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Fixes T9260. That task has a good description of the issue.
Test Plan: Followed steps in T9260 to reproduce the issue. Applied patch; issue went away.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9260
Differential Revision: https://secure.phabricator.com/D14169
Summary: Ref T6569. If a lease is activated with an expiration date, schedule a task to try to clean it up after that time.
Test Plan:
- Used `bin/drydock lease ... --until ...` to activate a lease in the near future.
- Waited for a bit.
- Saw it expire and get destroyed at the scheduled time.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14148
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary:
Ref T9253. For resources and leases that need to do something which takes a lot of time or requires waiting, allow them to allocate/acquire first and then activate later.
When we allocate a resource or acquire a lease, the blueprint can either activate it immediately (if all the work can happen quickly/inline) or activate it later. If the blueprint activates it later, we queue a worker to handle activating it.
Rebuild the "working copy" blueprint to work with this model: it allocates/acquires and activates in a separate step, once it is able to acquire a host.
Test Plan: With some power of imagination, brought up a bunch of working copies with `bin/drydock lease --type working-copy ...`
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14127
Summary:
Ref T9253. See discussion in D13843.
I want to let Drydock blueprints for Almanac services choose those services from a typeahead, but only list appropriate services in the typeahead. To do this:
- Provide a StandardCustomField for an arbitrary datasource.
- Adjust the AlmanacServiceDatasource to allow filtering by service class.
This implementation is substantially the same as the one in D13843, with some adjustments:
- I lifted most of the code in the `Users` standard custom field into a new `Tokenizer` standard custom field.
- The `Users` and `Datasource` custom fields now extend the `Tokenizer` custom field and can share most of the code it uses.
- I exposed this field fully as a configurable field. I don't think anyone will ever use it, but this generality costs us nearly nothing and improves consistency.
- The code in D13843 didn't actually pass the parameters over the wire, since the object that responds to the request is not the same object that renders the field. Use the "parameters" mechanism in datasources to get things passed over the wire.
Test Plan:
- Created a custom "users" field in Maniphest and made sure it still wokred.
- Created a custom "almanc services" field in Maniphest and selected some services for a task.
- With additional changes from D13843, selected an appropriate Almanac service in a new Drydock blueprint.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14111
Summary:
Ref T7785. Makes Figlet available without installing the `figlet` package.
The PEAR Text_Figlet code is really sketchy and includes this API, which is quite marvelous:
```
function loadFont($filename, $loadgerman = true)
```
At some point, this should probably be rewritten into a modern style, but it's not trivial since the figlet file format and rendering engine are somewhat complicated. I made some adjustments:
- Broke the dependency on the PEAR core.
- Prevented it from doing any wrong HTML escaping.
- Looked through it for any glaring security or correctness problems.
This code isn't very pretty or modern, but as far as I can tell it's safe and does render Figlet fonts in a reasonable way.
Test Plan: {F803268}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408, T7785
Differential Revision: https://secure.phabricator.com/D14102
Summary:
Ref T7785. Convert the Cowsay Remarkup rule to use a PHP implementation so we don't have to execute an external `cowsay` binary.
I removed some of the default ".cow" files that come with Cowsay because they:
- include Perl code which we can not interpret; or
- are primarily in-jokes or standalone visual puns or artwork rather than usable actors on the grand stage of cowsay; or
- offended my delicate sensibilities.
Users can add new cows to `resources/cows/custom/` if they want to make new cows available.
I have included a majestic original artwork depicting the "Companion Cube" character from //Portal//.
Test Plan: {F802535}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408, T7785
Differential Revision: https://secure.phabricator.com/D14100
Summary: Ref T9408. This rule is unsafe in principle, and a practical vulnerability has been found by a security researcher.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408
Differential Revision: https://secure.phabricator.com/D14103
Summary:
Fixes T9126. In particular:
- Add "Browse" links to all history views.
- Use icons to show "Browse" and "History" links, instead of text.
- Use FontAwesome.
- Generally standardize handling of these elements.
This might need a little design attention, but I think it's an improvement overall.
Test Plan:
- Viewed repository history.
- Viewed branch history.
- Viewed file history.
- Viewed table of contents on a commit.
- Viewed merged changes on a merge commit.
- Viewed a directory containing an external.
- Viewed a deleted file.
{F788419}
{F788420}
{F788421}
{F788422}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9126
Differential Revision: https://secure.phabricator.com/D14096
Summary: Fixes T8572. Ideally we would probably just permit this, but clean up the behavior until the day arrives when inline code is actually rewritten.
Test Plan:
- Tried to launch editors in Differential and Diffusion while comments were already open.
- Verified that "Jump to inline" works in both cases.
{F788008}
{F788009}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8572
Differential Revision: https://secure.phabricator.com/D14094
Summary: See D14025. In all cases where we compare hashes, use strict, constant-time comparisons.
Test Plan: Logged in, logged out, added TOTP, ran Conduit, terminated sessions, submitted forms, changed password. Tweaked CSRF token, got rejected.
Reviewers: chad
Reviewed By: chad
Subscribers: chenxiruanhai
Differential Revision: https://secure.phabricator.com/D14026
Summary: Fixes T9135. This is (probably) never intended and can be confusing.
Test Plan: Saw no hide button on unpublished inlines. Saw hide button on published inlines. Clicked hide button.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9135
Differential Revision: https://secure.phabricator.com/D14014
Summary:
Email is so exciting I can't wait 30 days for initial results.
ref T9161
Test Plan:
* `./bin/mail volume --days 60` took longer and gave plausibly larger
results.
* `./bin/mail volume --days 0` quickly told me no mail had been sent.
* `./bin/mail volume` Said it was still looking 30 days back.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T9161
Differential Revision: https://secure.phabricator.com/D13901
Summary:
We currently detect tab panels embedding themselves, but do not detect text panels embedding themselves with `{Wxx}`.
Detect these self-embedding panels.
I had to add a bit of a hack to pass the parent panel PHIDs to the rule. Generally, I got the Markup API kind of wrong and want to update it, I'll file a followup with details about how I'd like to move forward.
Test Plan:
Created a text panel embedding itself, a tab panel embedding a text panel embedding itself, a tab panel embedding a text panel embedding the tab panel, etc.
Rendered all panels standalone and as `{Wxx}` from a different context.
{F761158}
{F761159}
{F761160}
{F761161}
{F761162}
Reviewers: chad, jbeta
Reviewed By: chad, jbeta
Differential Revision: https://secure.phabricator.com/D13999
Summary:
Fixes T9268. Currently, we try to match any string like "a2f313f1" as a commit/revision, so short hashes will get picked up.
However, we don't require a word boundary or terminal after the match, so for input like "aaa...aaaaz" the engine can get stuck trying to split the string into sub-matches.
That is, in the original case, the input "aaaz" had valid matches against `[rA-Z0-9a-f]+` up to "z" of:
aaa
aa a
a aa
a a a
All of these will fail once it hits "z", but it has to try them all. This complexity is explosive with longer strings.
Instead, require a word boundary or EOL after the match, so this is the only valid match:
aaa
Then the engine sees the "z", says "nope, no match" and doesn't have to backtrack across all possible combinations.
Test Plan: Added a failing unit test, applied patch, clean test.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9268
Differential Revision: https://secure.phabricator.com/D13997
Summary:
Ref T8672. Ref T9187. Root issue in at least one case is:
- User makes a commit including a file with some non-UTF8 text (say, a Japanese file full of Shift-JIS).
- We pass the file to the TransactionEditor so it can inline or attach the patch if the server is configured for these things.
- When inlining patches, we convert them to UTF8 before inlining. We must do this since the rest of the mail is UTF8.
- When attaching patches, we send them in the original encoding (as file attachments). This is correct, and means we need to give the worker the raw patch in whatever encoding it was originally in: we can't just convert it to utf8 earlier, or we'd attach the wrong patch in some cases.
- TransactionEditor does its thing (e.g., creates the commit), then gets ready to send mail about whatever it did.
- The publishing work now happens in the daemon queue, so we prepare to queue a PublishWorker and pass it the patch (with some other data).
- When we queue workers, we serialize the state data with JSON.
So far, so good. But this is where things go wrong:
- JSON can't encode binary data, and can't encode Shift-JIS. The encoding silently fails and we ignore it.
Then we get to the worker, and things go wrong-er:
- Since the data is bad, we fatal. This isn't a permanent failure, so we continue retrying the task indefinitely.
This applies several fixes:
# When queueing tasks, fail loudly when JSON encoding fails.
# In the worker, fail permanently when data can't be decoded.
# Allow Editors to specify that some of their data is binary and needs special handling.
This is fairly messy, but some simpler alternatives don't seem like good ways forward:
- We can't convert to UTF8 earlier, because we need the original raw patch when adding it as an attachment.
- We could encode //only// this field, but I suspect some other fields will also need attention, so that adding a mechanism will be worthwhile. In particular, I suspect filenames //may// be causing a similar problem in some cases.
- We could convert task data to always use a serialize()-based binary safe encoding, but this is a larger change and I think it's correct that things are UTF8 by default, even if it makes a bit of a mess. I'd rather have an explicit mess like this than a lot of binary data floating around.
The change to make `LiskDAO` will almost certainly catch some other problems too, so I'm going to hold this until after `stable` is cut. These problems were existing problems (i.e., the code was previously breaking or destroying data) so it's definitely correct to catch them, but this will make the problems much more obvious/urgent than they previously were.
Test Plan:
- Created a commit with a bunch of Shift-JIS stuff in a file.
- Tried to import it.
Prior to patch:
- Broken PublishWorker with distant, irrelevant error message.
With patch partially applied (only new error checking):
- Explicit, local error message about bad key in serialized data.
With patch fully applied:
- Import went fine and mail generated.
Reviewers: chad
Reviewed By: chad
Subscribers: devurandom, nevogd
Maniphest Tasks: T8672, T9187
Differential Revision: https://secure.phabricator.com/D13939
Summary:
Ref T9218. See discussion there for rationale; I think this is the right behavior to pursue.
The screenshot below is pretty ugly. I think it's a lot worse than most real-world cases will be, since you have to sort of opt-in to having crazy levels of overlapping packages, and it's perfectly normal/reasonable for files owned by one package. Owners is powerful enough to let you specify sub-packages with exclusive ownership.
That said, this may be more typical than I hope. I don't think we can reduce the complexity here much for free, but it would might be reasonable to add some view options (e.g.: group by package?, show only packages I own?, show packages as icons with a tooltip?) if it's an issue.
Test Plan: {F734956}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9218
Differential Revision: https://secure.phabricator.com/D13940
Summary:
Fixes T8004.
- For paths which are part of a package, show the package.
- Highlight paths which are part of a package you (the viewer) have authority over.
Test Plan:
{F725418}
- Viewed owned and unowned chagnes in Diffusion and Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8004
Differential Revision: https://secure.phabricator.com/D13923
Summary:
Fixes T2183. We now use the same rendering element in both places.
Intentional changes:
- Package highlighting is out, coming back to both apps in next diff.
- removed redundant-feeling "Change" link. The information is now shown with a character ("M", "V", etc.) and the page is a click away under "History". Clicking the path also jumps you to substantially similar content. (We could restore it fairly easily, I just think it's probably the least useful thing in the table right now.)
Test Plan: Viewed a bunch of commits in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2183
Differential Revision: https://secure.phabricator.com/D13910
Summary:
Ref T2183. Introduces a new View which can (in theory) unify the Revision, Diff and Commit table of contents views.
This has the same behavior as before, but accepts slightly more general primitives and parameters and has somewhat cleaner code.
I've made one intentinoal behavior change: removing the "Open All in Editor" button. I suspect this is essentially unused, and is a pain to keep around. We can look at restoring it if anyone notices.
Test Plan: Looked at a bunch of revisions, no changes from before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2183
Differential Revision: https://secure.phabricator.com/D13908
Summary: Fixes T9099, I think this is as much as I can come up with for unbeta. Cleans up the answer header (profile image, smaller font, smaller header). Cleans up voting (new, with color), and makes it a bit more readable.
Test Plan:
Review a number of answers in ponder with and without votes, comments.
{F720189}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9099
Differential Revision: https://secure.phabricator.com/D13907
Summary: Use `PhutilClassMaQuery` instead of `PhutilSymbolLoader`, mostly for consistency. Depends on D13588.
Test Plan: Poked around a bunch of pages.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13589
Summary:
Fixes T7370. Two changes:
- Make the default to show nothing, instead of showing all the data. This is a better default because the data is sometimes sensitive. Workers should have to opt in to revealing it.
- For TargetWorkers, link to the target (technically the build, for now, since there's no dedicated target detail page).
Test Plan: {F698325}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7370
Differential Revision: https://secure.phabricator.com/D13845
Summary: Ref T3578 Allows display of projects if available on individual ponder search results.
Test Plan: Added projects to my questions, see them display on search results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D13793
Summary: Ref T8726. Convert these to be modular.
Test Plan:
- Created rules using these actions.
- Upgraded them.
- Verified they still work.
{F659266}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13705
Summary: Ref T8726. No surprises.
Test Plan:
Created rules using both action variants, applied upgrade, saw rules still work correctly.
{F658842}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13701
Summary: Ref T8726. Converts these actions to be modular. No real surprises in this change.
Test Plan:
{F658709}
- Wrote some rules.
- Migrated them forward.
- Used a bunch of these rules.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13699
Summary: DRAFT - throw together Phurl skeleton.
Test Plan: The idea is that `some/long/url` will become `install/Udet4d` and can be viewed and edited at `install/Udet4d/view` and `install/Udet4d/edit`, respectively?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, chad, epriestley, Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D13681
Summary:
Basic plumbing for Badges application.
- You can make Badges.
- You can look at a list of them.
- They can be edited.
- They can be assigned to people.
- You can revoke them from people.
- You can subscribe to them.
Test Plan: Make Badges with various options. Give them to people. Take them away from people.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: tycho.tatitscheff, johnny-bit, epriestley, Korvin
Maniphest Tasks: T6526
Differential Revision: https://secure.phabricator.com/D13626
Summary:
Fixes T8917. Prior to T2618, deleting inlines prompted users, then really deleted the rows.
After T2618, we delete immediately and offer "Undo". However, some interactions with drafts were missed, and we were only clearing the "this revision has a draft" flag on one of the delete pathways (when you delete all the comment text, then save the comment).
Make both the "Delete" action and the "Delete All Comment Text + Save" workflows do the same thing: mark the row as deleted, and clear any relevant drafts.
Test Plan:
- Made an inline comment on a clean revision with no "draft comments" marker in the list view.
- Used "delete" to delete it.
- After applying the patch, verified that no "draft commetns" marker appears in the list view.
- Used Delete and Edit + Remove Text + Save to delete comments in Differential and Diffusion.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8917
Differential Revision: https://secure.phabricator.com/D13665
Summary: I assume this is correct, it fixes my test case and was inconsistent with the rest of the file.
Test Plan: Add and Remove a CustomFieldPHID in Maniphest, no longer get errors.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8866
Differential Revision: https://secure.phabricator.com/D13642
Summary:
Ref T8726. Some adapters now have a large number of fields, and we lost the sort-of-human-readable implicit ordering when fields were modularized.
Instead, group and sort fields.
Test Plan: {F603066}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13619
