Summary:
Fixes T11940. In 2.11.0, Git has made a change so that newly-pushed changes are held in a temporary area until the hook accepts or rejects them.
This magic temporary area is only readable if the appropriate `GIT_ENVIRONMENTAL_MAGIC` variables are available. When executing `git` commands, pass them through from the calling context.
We're intentionally conservative about which variables we pass, and with good reason (see "httpoxy" in T11359). I think this continues to be the correct default behavior.
Test Plan:
- Upgraded to Git 2.11.0.
- Tried to push over SSH, got a hook error.
- Applied patch.
- Pulled and pushed over SSH.
- Pulled and pushed over HTTP.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11940
Differential Revision: https://secure.phabricator.com/D16988
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary:
Ref T10923. Fixes T9554.
When hosting a repository, we currently have a heuristic that tries to detect when you're doing an initial import: if you push more than 7 commits to an empty repository, it counts as an import and we disable mail/feed/etc.
Do something similar for observed repositories: if the repository is empty and we discover more than 7 commits, switch to import mode until we catch up.
This should align behavior with user expectation more often when juggling hosted vs imported repositories.
Test Plan:
- Created a new hosted repository.
- Activated it and allowed it to fully import.
- Added an "Observe URI".
- Saw it automatically drop into "Importing" mode until the import completed.
- Swapped it back to hosted mode.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9554, T10923
Differential Revision: https://secure.phabricator.com/D15877
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary:
Fixes T10665. See that task for discussion.
Because `$head_map` is not properly re-initialized for each ref we check, pushes which affect multiple branches (say, "A" and "B") can have information bleed from the first branch check to the second branch.
To trigger a problem behavior, you can push one commit which updates an existing branch, plus one commit which creates a new branch. If they process in the right order, the `$head_map` from the updated branch will bleed into the `$head_map` for the new branch and trigger an incorrect head split detection.
Test Plan:
- Pushed a set of changes which updated `branch-a` and created `branch-b`.
- Before change: improper detection of split heads.
- After change: clean push.
- Pushed a set of changes which split the head of `branch-d`.
- Correct detection of split heads.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10665
Differential Revision: https://secure.phabricator.com/D15522
Summary:
Ref T4245. We pass this exclusively for use by additional third-party hooks.
This is technically a backward compatibility break, but I suspect it doesn't affect anyone:
- Probably almost no one is using this (there are few reasons to, even for the tiny number of installs with custom commit hooks).
- If they are, there's a good chance the PHID will work anyway, since nearly all scripts and Conduit methods will accept it in place of a callsign now, and if it's in logging or debugging code the PHID is a reasonable substitute
- Even if it doesn't just keep working, the break should be very obvious in most reasonable cases.
I'll call this out explicitly in the changelog, though -- almost everything else will just continue working, but this is a strict compatibility break.
Test Plan:
- Ugh.
- Picked a hosted Git repo out of Diffusion.
- Went to the path on disk.
- Went into `hooks/`.
- Went into `pre-receive-phabricator.d/`.
- Wrote this hook and gave it `chmod +x`:
```name=stuff.sh
#!/bin/sh
echo $PHABRICATOR_REPOSITORY >> /tmp/stuff.log
```
- Pushed to the repository.
- Saw a PHID show up in the log:
```
$ cat /tmp/stuff.log
PHID-REPO-bqkcdp47euwnwlasrsrh
```
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15294
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T7731. For no particular reason, we currently put `ruleID` and `rulePHID` on `HeraldEffect` objects.
Pretty much all callers need the `HeraldRule` objects instead, and some go to great lengths to get them.
Just attach the `Rule` objects.
Test Plan: Will test thoroughly after next-ish changeset.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12269
Summary:
Fixes T7298. There are two ways to import a repository that you want to host, today:
- Create it as "hosted", then push everything to it.
- Create it as "imported", let it import, then switch it to "hosted".
- (Neither of these work with SVN.)
We don't specifically recommend one or the other, although I believe both should work, and most users seem to go with the first one.
In the first workflow, the new empty repository imports completely and gets marked "imported", so our default behavior is then to publish commits. This can generate a lot of email/notification/feed spam.
If you're a fancy expert you might turn off "publish" before pushing, but normal users will frequently miss this.
Instead, when we receive an "import-like" push to an empty repository, put the repository back into "importing" after we accept the changes.
This has to be heuristic since we can't know for sure if a push is an import or new commits, but here's a simple rule that should do pretty well. We can refine it if necessary.
Test Plan:
- Created a new empty repository.
- Added some debugging code; verified the "commit count" and "empty" rules were calculated properly.
- Pushed 8+ commits and saw the repo go into "importing", import, and leave "importing".
- Pushed 8+ commits again and saw them publish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7298
Differential Revision: https://secure.phabricator.com/D11827
Summary: Ref T5402. This more or less "fixes" it but there's probably some polish to do?
Test Plan:
stopped and started daemons. error logs look good.
ran bin/storage upgrade. noted that `adjust` added the appropriate indices for active and archive task.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11044
Summary: Fixes T6790. Turn the old method into "new" (old signature) and "newEphemeral". Deploy "newEphemeral" as many places as possible; basically places we are not in the Differential application *and* have no intentions of ever saving the diff. These callsites are also all places we are just trying to get some changesets at the end of the day.
Test Plan: set differential application policy to 'administrators only'. viewed a commit in diffusion and it worked without any errors! i'm just using my thinkin' noodle on the other code paths.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6790
Differential Revision: https://secure.phabricator.com/D11020
Summary: Fixes T6152, T6237. This introduces a viewPolicy column to the DifferentialDiff, and re-jiggers the DifferentialDiff policy implementation such that things behave as before once associated with a revision, else use the DifferentialDiff policy column value.
Test Plan: made a diff with a non-standard view policy and noted that policy was still selected in the revision step. arc lint.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237, T6152
Differential Revision: https://secure.phabricator.com/D10875
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary:
Fixes T5534. If you `git push origin :refs/tags/doesnotexist` (for some non-existing tag), we get a change where both the old and new refs are empty.
We incorrectly call this an "add", because the old ref is empty. Instead, call this a "delete", but skip the logic which would normally mark it dangerous.
(Possibly we should just reject these outright, but Git allows them, so stick with that for now.)
Test Plan:
Pushed nonexistent refs:
```
$ git push origin :refs/tags/doesnotexist
remote: warning: Allowing deletion of corrupt ref.
To ssh://dweller@localhost/diffusion/POEMS/
- [deleted] doesnotexist
$
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5534
Differential Revision: https://secure.phabricator.com/D9800
Summary:
Fixes T5304. Mercurial features a "{branches}" template keyword, documented as:
```
branches List of strings. The name of the branch on which the
changeset was committed. Will be empty if the branch name
was default.
```
At some time long in the past, I misinterpreted this to mean "list of branches where the branch head is a descendant of the commit". It is more like "list of zero or one elements, possibly containing the name of the branch the commit was originally made to, if that branch was not 'default'".
In fact, it seems like this is because a //very// long time in the past, Mercurial worked roughly like I expected:
> Ages ago (2005), we had a very different and ultimately unworkable
> approach to named branches that worked vaguely like .hgtags and allowed
> multiple branch names per revision.
http://marc.info/?l=mercurial-devel&m=129883069414855
This appears to be deprecated in modern Mercurial (it's not in the modern web documentation) although I can't find a commit about it so maybe that's just a documentation issue.
In any case, `{branches}` seems to never be useful: `{branch}` provides the same information without the awkward "default-if-empty" case.
Switch from `{branches}` to either `{branch}` (where that's good enough, notably in the hook engine) or `(descendants(%s) and head())`, which is equivalent to `--contains` in Git.
This fixes pushing to branches with spaces in their names, and makes the "Branches" / "Contains" queries moderately more consistent.
Test Plan:
- Pushed to a Mercurial branch with a space in it.
- Viewed list of branches in a Mercurial repository.
- Viewed containing branches of a Mercurial commit in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5304
Differential Revision: https://secure.phabricator.com/D9453
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
Fixes T5197. `hg log --rev x --rev y` means "rev x, and also rev y".
Use `--rev x:y`, which means "all commits between x and y, inclusive".
Test Plan: Pushed 4 commits at once, got 4 commits in push log.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5197
Differential Revision: https://secure.phabricator.com/D9309
Summary: Ref T5197. When searching for split branch heads, we incorrectly consider descendant heads of other branches. This can cause us to detect a split tip when one does not exist (the old tip is the branch tip, but other descendant heads exist). Instead, consider only heads on the same branch.
Test Plan:
Repro is something like this:
- `hg update default`
- `hg branch branch1; hg commit ...`
- `hg push`
- `hg update default; hg commit ...`
- `hg push` - Previously, we would find the head of `branch1` and incorrectly account for it as a head of `default`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5197
Differential Revision: https://secure.phabricator.com/D9308
Summary: Fixes T5050. This might not be 100% right in all edge cases, but it worked on everything I tried.
Test Plan:
- Pushed a branch deletion.
- Pushed a branch creation.
- Pushed a brnach creation + deletion.
- Pushed a brnach deletion + creation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5050
Differential Revision: https://secure.phabricator.com/D9122
Summary: Ref T5050. This fixes the immediate error (bad pht()) but doesn't fix the other error (can't `--close-branch`) yet.
Test Plan: Pushed a `--close-branch` commit, got a first-level error instead of an error about an error.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5050
Differential Revision: https://secure.phabricator.com/D9119
Summary:
Fixes T4960. Users `chmod +x` this, and then bash chokes on it.
Phabricator "owns" this file anyway, so there is no real ambiguity here: this should never be a hook script.
Test Plan:
- Did `chmod +x README`.
- Made a commit.
- Added `z.sh`, got blocked.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4960
Differential Revision: https://secure.phabricator.com/D8981
Summary:
Fixes T4677. Implements a "send an email" pre-receive action, which sends push summaries.
For use cases where features are often pushed as a large number of commits (e.g., checkpoint commits are retained), using commit emails means users get a ton of email. Instead, this allows you to get an email about a push, which summarizes what changed.
Overall, this is basically the same as commit email, but more suitable for some workflows.
Test Plan:
Wrote some rules, then made a bunch of pushes. Got email like this:
{F134929}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4677
Differential Revision: https://secure.phabricator.com/D8618
Summary:
Ref T4677. Currently, we record individual actions in a push as PhabricatorRepositoryPushLogs, but tie them together only loosely with a `transactionKey`.
Provide a real PushEvent object, and move some of the denormalized fields to it. This primarily just gives us more robust infrastructure for building, e.g., email about pushes, for T4677, since we can act on real PHIDs rather than passing awkward identifiers around.
Test Plan:
- Performed migration.
- Looked at database for consistency.
- Browsed/queried push logs.
- Pushed a bunch of stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4677
Differential Revision: https://secure.phabricator.com/D8615
Summary:
Fixes T4276. This adds "Change is enormous" to pre-commit content rules so we can, e.g., just reject these and not worry about them elsewhere.
Also, use the same numeric limits across the mechanisms so there's a consistent definition of an "enormous" changeset.
Test Plan:
- Set enormous limit to 15 bytes, pushed some changes, got blocked by a rule.
- Set it back, pushed OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7887
Summary:
Fixes T4189. Ref T4151. Allows repositories to have additional custom hooks for operations which can't be expressed with Herald (one such operation is lint).
This adds only local hook directories, since they're easier to use with existing hooks than global directories. I might add global directories eventually.
This doesn't support Mercurial since we have no demand for it and it's more complicated (we lose compatibility and power by just dropping a `hooks.d/` somewhere).
Test Plan:
- Pulled hosted SVN and Git repos to verify the hook directories generate correctly.
- Added a variety of hooks to the hook directories (echo + pass, fail).
- Pushed commits and verified the hooks fired (output expected info, or failed).
- Verified push log reflected the correct error code ("3", external) and detail ("nope.sh") when rejecting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4151, T4189
Differential Revision: https://secure.phabricator.com/D7884
Summary:
Fixes T4195. Allows you to write a rule against a commit's branches.
This completes outstanding work on T4195.
Test Plan: Pushed to Git and Mercurial repositories and verified branches were selected correctly by examining transcripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7820
Summary:
Fixes T4257. The `hg heads` command exits with an error code and no output in an empty repository.
Just ignore the error code: we don't have a great way to distinguish between errors, and we ran another `hg` command moments before, so we have at least some confidence it isn't a PATH sort of thing.
Test Plan: Created a new Mercurial repository and pushed to hit the error in T4257. Applied this fix and got a clean push with an accurate push log.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4257
Differential Revision: https://secure.phabricator.com/D7817
Summary:
Ref T4195. This allows you to write rules which disallow merge commits.
Also make the reject message a little more useful.
Test Plan:
remote: This push was rejected by Herald push rule H27.
remote: Change: commit/daed0d448404
remote: Rule: No Merges
remote: Reason: No merge commits allowed. If you must push a merge, include "@force-merge" in the commit message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7809
Summary: Ref T4195. Even though we use `svnlook` in the hook itself, I need this query elsewhere, so provide it and merge the classes into one which does the right thing.
Test Plan:
- Used `reparse.php` to reparse messages for Git, SVN and Mercurial commits, using `var_dump()` to examine the commit refs for sanity.
- Used `reparse.php` to reparse changes for an SVN commit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7800
Summary: Ref T4195. Add Mercurial support to the content hook phase.
Test Plan:
Here are some `commit` push logs for a Mercurial repo:
{F90689}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7792
Summary: Ref T4195. Adds support for diff content rules.
Test Plan: Pushed SVN and Git changes through, saw them generate reasonable transcripts. Mercurial still isn't hooked up to this phase.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7791
Summary: Ref T4195. This doesn't provide any interesting fields yet (content, affected paths, commit message) but fires the hook correctly.
Test Plan: Added a blocking hook and saw it fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7789
Summary: Ref T4195. SVN has no such thing as refs (I was thinking about writing a quasi-ref anyway like `HEAD: r23 -> r24`, but I'm not sure it would actually be useful). And content is very easy to build.
Test Plan: Pushed some stuff to SVN, got logs from it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7766
Summary: Ref T4195. This doesn't actually work like I thought it did: it only fires locally, when you run `hg tag`. Mercurial tags are also weird and basically don't make any sense and everyone should use bookmarks instead. We could implement some flavor of this eventually, but I'd like to see users request it first. They can implement their own with content-based hooks once those work, anyway.
Test Plan: This code didn't do anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7765
Summary:
Ref T4195. This pulls the central logic of HookEngine up one level and makes all the git stuff genrate PushLogs.
In future diffs, everything will generate PushLogs and we can hand those off to Herald.
Test Plan:
Pushed a pile of valid/invalid stuff:
{F89256}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7761
Summary: Fixes T4224. If you `git merge-base A B`, and they have //no// ancestor, the command exits with an error. Assume errors mean "no ancestry" and continue.
Test Plan: Completely rewrite a repository with a `--force` push.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4224
Differential Revision: https://secure.phabricator.com/D7756
Summary:
Ref T4195. Like the previous diffs, these both create a useful log and give us an object to hand off to Herald.
Surface this information in Diffusion, too, and clean things up a little bit.
Test Plan: {F87565}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7718
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary:
Ref T4189. This doesn't add any rules yet, but does all the heavy lifting to figure out what's changed and put it in a consuamble (if somewhat ad-hoc) datastructure, which lists all the ref and tag modifications and all the new commits in a consistent way.
From here, it should be fairly straightforward to add top-level rules (e.g., ff pushes only).
Test Plan: Output is huge, see comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7687
