Summary:
Depends on D19650. Ref T13197. Allow `SearchCheckboxesField` to have a "deprecated" map of older aliases, then convert them to modern values.
On the API method page, show all the values.
This technically resolves the issue in PHI841, although I still plan to migrate behind this.
Test Plan:
{F5875363}
- Queried audits, fiddled with `?status=1,audited`, etc.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19651
Summary:
Ref T13195. Ref PHI851. Currently, checkbox constraints don't tell you what values are supported on the API page.
You can figure this out with "Inspect Element" or by viewing the source code, but just render a nice table instead.
Test Plan: {F5862969}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19641
Summary:
Ref T13164. In PHI801, an install reported a particular slow Conduit method call.
Conduit calls aren't easily profilable with normal tools (for example, `arc call-conduit --xprofile ...` gives you a profile of the //client//). They can be profiled most easily with `bin/conduit call ... --xprofile`.
However, `bin/conduit call` currently doesn't let you pick a user to execute the command on behalf of, so it's not terribly useful for profiling `*.edit`-style methods which do a write: these need a real acting user.
Test Plan:
Ran `bin/conduit call --method user.whoami --as epriestley ...` with valid, invalid, and no acting users.
```
$ echo '{}' | ./bin/conduit call --method user.whoami --as epriestley --input -
Reading input from stdin...
{
"result": {
"phid": "PHID-USER-icyixzkx3f4ttv67avbn",
"userName": "epriestley",
"realName": "Evan Priestley",
...
```
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19566
Summary: Ref T13168. This is just a small quality-of-life fix: we can disclose which public key we're talking about because public keys are public.
Test Plan:
- Hit public key error (through my own bumbling / not reading or following instructions). Specifically, I haven't associated the key with a device in Almanac.
- Before: vague error.
- After: more specific error with enough key material that I could grep for it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13168
Differential Revision: https://secure.phabricator.com/D19516
Summary:
Ref T13060. See PHI343. Triaging this bug required figuring out where in the pipeline UTF8 was being dropped, and bisecting the pipeline required making calls to Conduit.
Currently, there's no easy way to debug/inspect arbitrary Conduit calls, especially when they are `diffusion.*` calls which route to a different host (even if you have a real session and use the web console for these, you just see an HTTP service call to the target host in DarkConsole).
Add a `bin/conduit` utility to make this kind of debugging easier, with an eye toward the Phacility production cluster (or other similar clusters) specifically.
Test Plan:
- Ran `echo '{}' | bin/conduit call --method conduit.ping --input -` and similar.
- Used a similar approach to successfully diagnose the UTF8 issue in T13060.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13060
Differential Revision: https://secure.phabricator.com/D18987
Summary:
See PHI305. Ref T13046.
The SSH workflows currently extend `PhabricatorManagementWorkflow` to benefit from sharing all the standard argument parsing code. Sharing the parsing code is good, but it also means they inherit a `getViewer()` method which returns the ommnipotent viewer.
This is appropriate for everything else which extends `ManagementWorkflow` (like `bin/storage`, `bin/auth`, etc.) but not appropriate for SSH workflows, which have a real user.
This caused a bug with the pull logs where `pullerPHID` was not recorded properly. We used `$this->getViewer()->getPHID()` but the correct code was `$this->getUser()->getPHID()`.
To harden this against future mistakes:
- Don't extend `ManagementWorkflow`. Extend `PhutilArgumentWorkflow` instead. We **only** want the argument parsing code.
- Rename `get/setUser()` to `get/setSSHUser()` to make them explicit.
Then, fix the pull log bug by calling `getSSHUser()` instead of `getViewer()`.
Test Plan:
- Pulled and pushed to a repository over SSH.
- Grepped all the SSH stuff for the altered symbols.
- Saw pulls record a valid `pullerPHID` in the pull log.
- Used `echo {} | ssh ... conduit conduit.ping` to test conduit over SSH.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18912
Summary: Updates settings panel UI for new white box, cleans up other various UI nitpicks.
Test Plan: Click through each setting that had a local setting page. Edit Engine pages will follow up on another diff.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18526
Summary: Moves Settings to use a normal side navigation vs. a two column side navigation. It also updates Edit Engine to do the same, but I don't think there are other callsites. Added a consistent header for better clarification if you were editng your settings, global settings, or a bot's settings.
Test Plan: Test each page on a personal account, create global settings, test each page there, create a bot account, and test each page on the bot account. Anything else?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18342
Summary: Ref T10769. See PHI8. We have an unconditional logging write which we can skip in read-only mode.
Test Plan:
- Put Phabricator in read-only mode with `cluster.read-only`.
- Called `conduit.ping` via web UI.
- Before: write-on-read-only exception.
- After: good result.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D18233
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary: Ref T10390. Simplifies dropdown by rolling out canUseInPanel in useless panels
Test Plan: Add a query panel, see less options.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17341
Summary: Fixes T12252.
Test Plan:
I just faked this, but likely repro is:
- Call method `x.y`.
- Remove method `x.y` from the codebase.
- View log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12252
Differential Revision: https://secure.phabricator.com/D17342
Summary:
Ref T12074. The "v3" API methods (`*.search`, `*.edit`) are currently marked as "unstable", but they're pretty stable and essentially all new code should be using them.
Although these methods are seeing some changes, almost all changes are additive (support for new constraints or attachemnts) and do not break backward compatibility. We have no major, compatibility-breaking changes planned.
I don't want to mark the older methods "deprecated" yet since `arc` still uses a lot of them and there are some capabilities not yet available on the v3 methods, but introduce a new "frozen" status with pointers to the new methods.
Overall, this should gently push users toward the newer methods.
Test Plan: {F2325323}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12074
Differential Revision: https://secure.phabricator.com/D17158
Summary:
Ref T11954. In cluster configurations, we get repository information by making HTTP calls over Conduit.
These are slower than local calls, so clustering imposes a performance penalty. However, we can use futures and parallelize them so that clustering actually improves overall performance.
When not running in clustered mode, this just makes us run stuff inline.
Test Plan:
- Browsed Git, Mercurial and Subversion repositories.
- Locally, saw a 700ms wall time page drop to 200ms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17009
Summary: Ref T11954. This old query class can use slightly more modern code.
Test Plan: Ran Conduit methods, verified results are unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16996
Summary: Ref T11954. Depends on D16994. This implements the Conduit method cache described in that revision for a small global Conduit performance improvement.
Test Plan: Verified Conduit has the same behavior at lower cost. See D16994 for details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16995
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary: Accept Conduit parameter values as strings (e.g. from `curl`) and convert to required type.
Test Plan:
Call conduit method with int/bool parameter iusing `curl` and make sure it does not result in validation error, e.g.
```
$ curl http://$PHABRICATOR_HOST/api/maniphest.search -d api.token=$CONDUIT_TOKEN -d constraints[modifiedEnd]=$(date +%s) -d constraints[hasParents]=true -d limit=1
```
Fixes T10456.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10456
Differential Revision: https://secure.phabricator.com/D16694
Summary: Fixes T9063. Removes the "Application" field from the search because it was largely redundant with the 'Name Contains' field.
Test Plan: Went to `/conduit/query/modern/`, clicked on `Edit Query` and noted that there is no "Application" field anymore. The 'Name Contains' field still works however.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T9063
Differential Revision: https://secure.phabricator.com/D16602
Summary:
Ref T11593. When you call a `*.search` method like `maniphest.search`, we don't currently validate that all the constraints you pass are recognized.
I think there were two very weak arguments for not doing this:
- It makes compatibility in `arc` across versions slightly easier: if we add a new constraint, we could add it to `arc` but also do client-side filtering for a while.
- Conduit parameter types //could//, in theory, accept multiple inputs or optional/alias inputs.
These reasons are pretty fluff and T11593 is a concrete issue caused by not validating. Just validate instead.
Test Plan:
- Made a `maniphest.search` call with a bogus constraint, got an explicit error about the bad constraint.
- Made a `maniphest.search` call with a valid constraint (`"ids"`).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11593
Differential Revision: https://secure.phabricator.com/D16507
Summary: Adds a schema patch that removes conduit_connectionlog. This table hasn't been used in 8ish months so it's probably safe to get rid of.
Test Plan: Apply the patch locally and confirm that the table does indeed get dropped.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16438
Summary:
Ref T11473. If you write a method like `get_stuff(ids)` and then call it with an empty list of IDs, you can end up passing an empty constraint to Conduit.
If you run a `*.search` method with such a constraint, like this one:
```
{
"ids": []
}
```
...we have three possible beahviors:
# Treat it like the user passed no constraint (basically, ignore the constraint).
# Respect the constraint (return no results).
# Error.
Currently, we do (1). However, this is pretty confusing and I think clearly the worst option, since it means `get_stuff(array())` in client code will often tend to return a ton of results.
We could do (2) instead, but this is also sort of confusing (it may not be obvious why nothing matched, even though it's an application bug) and I think most reasonable client code should be doing an `if ($ids)` test: this test makes clients a little more complicated, but they can save a network call, and I think they often need to do this test anyway (for example, to show the user a different message).
This implements (3), and just considers these to be errors: this is the least tricky behavior, it's consistent with what we do in PHP, makes fairly good sense, and the only cost for this is that client code may need to be slightly more complex, but this slightly more complex code is usually better code.
Test Plan: Ran Conduit `*.search` queries with `"ids":[]` and `"phids":[]`, got sensible errors instead of runaway result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16396
Summary:
Ref T11404. Currently, SearchEngineAttachments can bulk-load data but SearchEngineExtensions can not.
This leads to poor performance of custom fields. See T11404 for discussion.
This changes the API to support a bulk load + format pattern like the one Attachments use. The next change will use it to bulk-load custom field data.
Test Plan:
- Ran `differential.query`, `differential.revision.search` as a sanity check.
- No behavioral changes are expected
- See next revision.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16350
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary: Fixes T11223. I missed a few of these; most of them kept working anyway because we have redirects in place, but make them a bit more modern/not-hard-coded.
Test Plan:
- Generated and revoked API tokens for myself.
- Generated and revoked API tokens for bots.
- Revoked temporary tokens for myself.
- Clicked the link to the API tokens panel from the Conduit console.
- Clicked all the cancel buttons in all the dialogs, too.
In all cases, everything now points at the correct URIs. Previously, some things pointed at the wrong URIs (mostly dealing with stuff for bots).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11223
Differential Revision: https://secure.phabricator.com/D16185
Summary:
Ref T11098. This primarily fixes Conduit calls to `*.edit` methods failing when trying to access user preferences.
(The actual access is a little weird, since it seems like we're building some UI stuff inside a policy query, but that's an issue for another time.)
To fix this, consolidate the "we're about to run some kind of request with this user" code and run it consistently for web, conduit, and SSH sessions.
Additionally, make sure we swap things to the user's translation.
Test Plan:
- Ran `maniphest.edit` via `arc call-conduit`, no more settings exception.
- Set translation to ALL CAPS, got all caps output from `ssh` and Conduit.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16066
Summary:
Ref T4103. This just adds a single global default setting group, not full profiles.
Primarily, I'm not sure how administrators are supposed to set profiles for users, since most ways user accounts get created don't really support setting roles.. When we figure that out, it should be reasonably easy to extend this. There also isn't much of a need for this now, since pretty much everyone just wants to turn off mail.
Test Plan:
- Edited personal settings.
- Edited global settings.
- Edited a bot's settings.
- Tried to edit some other user's settings.
- Saw defaults change appropriately as I edited global and personal settings.
{F1677266}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16048
Summary:
Ref T4103. Settings panels are grouped into categories of similar panels (like "Email" or "Sessions and Logs").
Currently, this is done informally, by just grouping and ordering by strings. This won't work well with translations, since it means the ordering is entirely dependent on the language order, so the first settings panel you see might be something irrelvant or confusing. We'd also potentially break third-party stuff by changing strings, but do so in a silent hard-to-detect way.
Provide formal objects and modularize the panel groups completely.
Test Plan: Verified all panels still appear properly and in the same groups and order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16020
Summary:
Ref T10917. Currently, when you delete an SSH key, we really truly delete it forever.
This isn't very consistent with other applications, but we built this stuff a long time ago before we were as rigorous about retaining data and making it auditable.
In partiular, destroying data isn't good for auditing after security issues, since it means we can't show you logs of any changes an attacker might have made to your keys.
To prepare to improve this, stop destoying data. This will allow later changes to become transaction-oriented and show normal transaction logs.
The tricky part here is that we have a `UNIQUE KEY` on the public key part of the key.
Instead, I changed this to `UNIQUE (key, isActive)`, where `isActive` is a nullable boolean column. This works because MySQL does not enforce "unique" if part of the key is `NULL`.
So you can't have two rows with `("A", 1)`, but you can have as many rows as you want with `("A", null)`. This lets us keep the "each key may only be active for one user/object" rule without requiring us to delete any data.
Test Plan:
- Ran schema changes.
- Viewed public keys.
- Tried to add a duplicate key, got rejected (already associated with another object).
- Deleted SSH key.
- Verified that the key was no longer actually deleted from the database, just marked inactive (in future changes, I'll update the UI to be more clear about this).
- Uploaded a new copy of the same public key, worked fine (no duplicate key rejection).
- Tried to upload yet another copy, got rejected.
- Generated a new keypair.
- Tried to upload a duplicate to an Almanac device, got rejected.
- Generated a new pair for a device.
- Trusted a device key.
- Untrusted a device key.
- "Deleted" a device key.
- Tried to trust a deleted device key, got "inactive" message.
- Ran `bin/ssh-auth`, got good output with unique keys.
- Ran `cat ~/.ssh/id_rsa.pub | ./bin/ssh-auth-key`, got good output with one key.
- Used `auth.querypublickeys` Conduit method to query keys, got good active keys.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10917
Differential Revision: https://secure.phabricator.com/D15943
Summary: These parameters wrongly extend List.
Test Plan:
Used createdStart field for a search - didn't get error about "should be a list".
`git grep 'extends ConduitListParameterType'`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15881
Summary: Ref T10748. Brings this forward in the UI and EditEngine.
Test Plan:
- Edited via Conduit.
- Viewed via Manage UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15805
Summary: This is completely obsoleted by `owners.search`. See D15472.
Test Plan: Viewed API method in UI console.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15769
Summary:
Ref T2783. This allows this worker to run on a machine different to the one that stores the repository, by routing the execution of Git over Conduit calls.
This API method is super gross, but fixing it isn't straightforward and it runs into other complicated considerations. We can fix it later; for now, just define it as "internal" to limit how much mess this creates.
"Internal" methods do not appear on the console.
Test Plan: Ran `bin/repository reparse --change <commit> --trace` on several commits, saw daemons make a Conduit call instead of running a `git` command.
Reviewers: hach-que, chad
Reviewed By: chad
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11874
Summary:
Ref T10784. On `secure`, logged-out users currently can't browse repositories when cluster/service mode is enabled because they aren't permitted to make intracluster requests.
We don't allow totally public external requests (they're hard to rate limit and users might write bots that polled `feed.query` or whatever which we'd have no way to easily disable) but it's fine to allow intracluster public requests.
Test Plan: Browsed a clustered repository while logged out locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10784
Differential Revision: https://secure.phabricator.com/D15695
Summary: Ref T5214. Fixes T10486. Ref T6027. This exposes the `TYPE_COLUMNS` transaction in a usable way via API, and fixes the interactions via prefilling.
Test Plan:
- Created tasks directly into columns via API.
- Moved tasks between columns via API.
- Used `?column=...` to try to create a template task with valid and bogus column PHIDs.
Reviewers: chad
Reviewed By: chad
Subscribers: AmyLewis
Maniphest Tasks: T5214, T6027, T10486
Differential Revision: https://secure.phabricator.com/D15636
Summary: View various conduit pages and update to new UI and add calls to newPage
Test Plan: View list, view method, make a call.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15613
Summary:
Ref T7303. Ref T7673. This implements an "auth.logout" which:
- terminates all web sessions;
- terminates the current OAuth token if called via OAuth; and
- may always be called via OAuth.
(Since it consumes an OAuth token, even a "malicious" OAuth application can't really be that much of a jerk with this: it can't continuously log you out, since calling the method once kills the token. The application would need to ask your permission again to get a fresh token.)
The primary goal here is to let Phacility instances call this against the Phacility upstream, so that when you log out of an instance it also logs you out of your Phacility account (possibly with a checkbox or something).
This also smooths over the session token code. Before this change, your sessions would get logged out but when you reloaded we'd tell you your session was invalid.
Instead, try to clear the invalid session before telling the user there's an issue. I think that ssentially 100% of invalid sessions are a result of something in this vein (e.g., forced logout via Settings) nowadays, since the session code is generally stable and sane and has been for a long time.
Test Plan:
- Called `auth.logout` via console, got a reasonable logout experience.
- Called `auth.logout` via OAuth.
- Tried to make another call, verified OAuth token had been invalidated.
- Verified web session had been invalidated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303, T7673
Differential Revision: https://secure.phabricator.com/D15594
Summary:
Ref T7303. OAuth scope handling never got fully modernized and is a bit of a mess.
Also introduce implicit "ALWAYS" and "NEVER" scopes.
Always give tokens access to meta-methods like `conduit.getcapabilities` and `conduit.query`. These do not expose user information.
Test Plan:
- Used a token to call `user.whoami`.
- Used a token to call `conduit.query`.
- Used a token to try to call `user.query`, got rebuffed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15593
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary:
Fixes T10117.
- I accidentally broke setting `null` to unassign tasks at some point when I added richer validation.
- Raise a better error if the user passes junk.
Test Plan:
- Unassigned a task via API and web UI.
- Reassigned a task via API and web UI.
- Tried to do an invalid assign via API, got a sensible error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10117
Differential Revision: https://secure.phabricator.com/D14992
Summary:
Ref T9897. This one is a little more involved because of how getting a post on a blog works.
I also changed moving posts to be a real transaction (which shows up in history, now).
Test Plan: Created posts from web UI and conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14902
Summary: Ref T9897.
Test Plan: Used API to make a few changes to a blog.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14899
