Summary: To assist with {T5245}, I have added projects back into the lipsum maniphest generator with the edge infrastructure.
Test Plan: Run the lipsum script for PhabricatorManiphestTaskTestDataGenerator and make sure it generates project data.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10202
Summary: Fixes T5850. Also fixes some logic where the wrong preempting events could be attached during a bulk query.
Test Plan: Phrequent list now shows preemption-aware times.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5850
Differential Revision: https://secure.phabricator.com/D10223
Summary:
Fixes T5848.
- Disallow tracking negative time.
- Preserve note if there's an error with the time selection.
- Show start time and duration.
- Slightly better error messages.
Test Plan: Started and stopped time. Tried to select future/negative ranges.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5848
Differential Revision: https://secure.phabricator.com/D10218
Summary:
Via HackerOne. If a user adds an email address and typos it, entering `alinculne@gmailo.com`, and it happens to be a valid address which an evil user controls, the evil user can request a password reset and compromise the account.
This strains the imagination, but we can implement a better behavior cheaply.
- If an account has any verified addresses, only send to verified addresses.
- If an account has no verified addresses (e.g., is a new account), send to any address.
We've also received several reports about reset links not being destroyed as aggressively as researchers expect. While there's no specific scenario where this does any harm, revoke all outstanding reset tokens when a reset link is used to improve the signal/noise ratio of the reporting channel.
Test Plan:
- Tried to send a reset link to an unverified address on an account with a verified address (got new error).
- Tried to send a reset link to a verified adddress on an account with a verified address (got email).
- Tried to send a reset link to an invalid address (got old error).
- Tried to send a reset link to an unverified address on an account with only unverified addresses -- a new user (got email).
- Requested several reset links, used one, verified all the others were revoked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10206
Summary: Ref T2787. This is very basic and just helps me know that the data is inserting correctly.
Test Plan: {F187765}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10205
Summary:
- Fixes T5851. Currently, if a commit has `Fixes T123`, we generate an email with just that before generating the commit email. Don't send/publish transactions about a commit before it imports (this is a tiny bit hacky, but well-contained and I don't think it causes any problems).
- Fixes T4864. Currently, we try to parse Differential information even if Differential is not installed. Instead, do this only if Differential is installed.
- Fixes T5771. Currently, if we can't figure out who the committer/author of a commit is, we don't publish a `Fixes T123` transaction. Instead, fall back to acting as "Diffusion" if we can't find a better actor. Most of this diff expands the role of application actors. The existing application actors (Herald and Harbormaster) seem to be working well.
Test Plan:
- Pushed a commit with `Fixes T123` and verified it did not generate email directly. (The task half of the transaction still does, correctly.)
- Uninstalled Differential and pushed a commit, got a clean import instead of an exception.
- Commented out author/committer PHIDs and pushed stuff, saw a "Diffusion" actor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5771, T4864, T5851
Differential Revision: https://secure.phabricator.com/D10221
Summary:
Fixes T5838.
- We currently try to use a `ConduitAPIMethod` object as a string.
- We then pass that string to the parent's `__construct()` method as `$message`.
Test Plan: Uninstalled Maniphest, then tried to execute `maniphest.createtask`. Got a useful exception message instead of an error during message construction.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5838
Differential Revision: https://secure.phabricator.com/D10211
Summary:
Fixes T5849. When a new file is created, we might have to actually write the data to a storage engine, or we might be able to just point at data which is already there.
Currently, these two paths handle `$params` with different code and mild behavioral differences. Instead, have them call the same code so they get the same behavior.
Test Plan:
- Uploaded the same file multiple times to home page.
- Uploaded the same file multiple times as profile picture.
- Generated files via Diffusion.
- All the files got the expected properties, whether they were reusing data or not.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5849
Differential Revision: https://secure.phabricator.com/D10216
Summary:
Ref T5685. Currently we just 403 on an invalid token, but we can be a little more helpful.
The issues here are:
- If we **do** redirect you on this page and something goes wrong, you might get stuck in a redirect loop.
- If we **don't** redirect you, copy/pasting the link to someone (or reloading the page) gives them a pretty confusing result, since the link doesn't work any more. Prior to this diff, they get a 403.
To mitigate this, do a little better than a bare 403: give them a link to auth and generate a new URI for the file.
If this is still confusing, the next best thing I can come up with is something like this:
- Put some modulous of the timestamp in the URI.
- If the current time is within 2 seconds of the generation time, show this dialog.
- Otherwise, redirect.
That seems like it would be okay, but I worry that "2" has to be small (so links you copy/paste -> chat -> click still work) and a small value means that a small amount of clock skew breaks things. We could use the database clock, but ehhh.
Other ideas:
- Put a hash of the remote IP in the URI, redirect if it doesn't match. Fails for companies behind a NAT gateway but should work in a lot of other cases.
- Just redirect always, there's no reason it should ever loop and browsers don't really do anything bad when there's a loop (they'll show an error after too many redirects).
I'm leaning toward letting this stabilize in the wild for a bit, then trying "always redirect".
Test Plan: {F188914}
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10215
Summary: Ref T5685. We've added a new `canCDN` flag to control whether or not files can be cached and delivered over a CDN. Show this flag in the UI.
Test Plan: Viewed several files, saw correct/expected UI values.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10213
Summary: See D10189. We should never hit this anymore, so clean it up.
Test Plan:
- Reloaded a board, saw everything stay where it was before the change.
- Added a new task to the project, saw it show up in backlog.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10200
Summary: Fixes T5829. This stuff is old and busted, but keep it working for now.
Test Plan: No more fatal when there are recently closed tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5829
Differential Revision: https://secure.phabricator.com/D10201
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary: This slipped through the datasource modernization stuff.
Test Plan: Used search UI.
Reviewers: rush898, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10196
Summary:
Ref T5024, T4427, T5474, T5523. Instead of separate icons in the column header for "Create Task" and "Edit Column Settings", use a dropdown menu.
- T5024 will likely add a "View Standalone" option.
- T4427 needs header space to show a count.
- T5474 likely needs "Edit Triggers..." (this seems reasonable to separate from editing the name, etc.)
- T5523 likely adds "Move all tasks..." eventually.
Test Plan: {F187414}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5523, T5474, T5024, T4427
Differential Revision: https://secure.phabricator.com/D10190
Summary: Sets layout as flush when rendering diff table or timeline in a Dialog
Test Plan: Tested each
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10194
Summary: Fixes T5739. I only got D9857 half right: the new method names are correct, but the bodies needed to change too.
Test Plan: Signed a document as an anonymous user.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5739
Differential Revision: https://secure.phabricator.com/D10191
Summary:
Via the UI adding a mailinglist for CC works, but via
the API currently it shows:
>One or more PHIDs were invalid for ccPHIDS
This removes the user validation check for ccPHIDs.
(I left it in for other things like owner since that seems
still appropriate?)
Test Plan:
used arc locally to add a mailinglist to cc
```echo '{"id": 2, "ccPHIDs": ["PHID-MLST-ohduchbv4dfimk7opt3r"]}' | arc call-conduit maniphest.update```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10193
Summary:
Ref T4807. This is probably a complete fix, but I'd be surprised if there isn't a little cleanup I missed.
When users drag tasks on a "natural"-ordered workboard, leave things where they put them.
This isn't //too// bad since a lot of the existing work is completely reusable (e.g., we don't need any new JS).
Test Plan:
- Dragged a bunch of stuff around, it stayed where I put it after dropped and when reloaded.
- Dragged stuff across priorities, no zany priority changes (in "natural" mode).
- Created new tasks, they show up at the top.
- Tagged new tasks, they show up at the top of backlog.
- Swapped to "priority" mode and got sorting and the old priority-altering reordering.
- Added tasks in priority mode.
- Viewed task transactions for correctness/sanity.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10182
Summary:
Ref T4807. This is an alternative to D10179. The problem these diffs solve is that I want to be able to reorder a column's positions without having to load the actual objects, but that's difficutl because two positions may have the same sequence number (and I think it's good that we allow that, since it makes a bunch of other stuff way easier).
Instead of using the object ID (e.g., the task ID) to reorder positions with the same sequence, use the position itself. This is a little easier, is less ambiguous if columns eventually have several types of objects, and produces a better behavior when old objects are freshly added to a board. For example, if you tag `T300` with `#project`, this new rule will push it to the top of "Backlog" while the old rule might have buried it deep. I think this behavior is desirable and more "natural".
When creating a group of new rows, we do order the batch by ID, so a group of freshly-tagged objects float to the top togehter in ID order. This seems like the most natural rule, too.
Test Plan:
- Loaded some boards with implicit objects on them (freshly tagged tasks) and saw rows create.
- Verified new rows created in the right order.
- Dragged some tasks around.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10180
Summary:
Ref T4807. This doesn't actually do anything yet, but adds a dropdown menu for choosing an ordering and gets all the UI working correctly.
This also fixes a bug where column hidden state wouldn't persist across filter changes.
(I won't land this until it does something, but the next diff will probably be a mess so this seemed like a clean place to sever things.)
Test Plan:
{F187114}
- Altered sort ordering.
- Altered hidden state and filters, verified all states persisted correctly.
- Added `phlog()` to edit/create and move controllers and verified they receive sort information.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: swisspol, chad, epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10178
Summary:
CanCDN flag indicates that a file can be served + cached
via anonymous content distribution networks.
Once D10054 lands, any files that lack the CanCDN flag
will require a one-time-use token and headers will
prohibit cache to protect sensitive files from
unauthorized access.
This diff separates the CanCDN changes from the code that
enforces these restrictions in D10054 so that the changes
can be tested and refined independently.
Test Plan: Work in progress
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: rush898, qgil, epriestley, aklapper, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10166
Summary: Fixes T5705. This was just derp; instead of returning the duration of the first slice, return the duration of all the slices.
Test Plan: Added unit tests. Saw reasonable results in the UI.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5705
Differential Revision: https://secure.phabricator.com/D10184
Summary: Fixes T5423, "is newly created" herald rule fails on dry runs
Test Plan: Create herald "is newly created" rule, and do a dry run on an existing pholio mock, differential commit, or maniphest task. Should not return an exception.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5423
Differential Revision: https://secure.phabricator.com/D10187
Summary:
Ref T5245. This removes some hacks and activates two meaningful interactions:
- The "projects" field goes through shared code now.
- Mentioning projects in tasks using hashtags now tags them.
Test Plan:
- Viewed a task with projects.
- Viewed a task with no projects.
- Viewed a task with projects and board positions.
- Viewed a revision with projects.
- Made a `#hashtag` comment in Maniphest and got a project association.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D10177
Summary: Ref T1049. This allows build steps to create URI artifacts, which can be used to link to external builds and other resources.
Test Plan: Used a build step in an external library to test the creation of a URI artifact and verified it appeared correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10173
Summary: Resolves T5814. Ref T1049. This changes "Stop" to "Pause" in the UI (internally it's still referred to as Stop).
Test Plan: Viewed builds and saw the intended wording.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049, T5814
Differential Revision: https://secure.phabricator.com/D10172
Summary: Use cutlery icon for hilarity. Ref T5768.
Test Plan: made something with remarkup in it, used 'view raw' and saw the remarkup raw in a nice little dialogue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5768
Differential Revision: https://secure.phabricator.com/D10183
Summary: Fixes T5478. For "personal" installs use the person icon; for global use the global icon. For both providing explanatory tooltip text about what's going on. This will need to be updated if / when we start installing dashboards to other applications. Also, this query isn't 100% optimized but the major part *is* so I think its okay.
Test Plan: Installed a dashboard for personal use and verified correct icon / text showed up. Did the same for global installed dashboard...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5478
Differential Revision: https://secure.phabricator.com/D10181
Summary:
This is pretty basic allowing a user to set the
policy as a valid string ('no-one' or 'users') or
as a valid PHID. Without an explicit policy
a permissive one is set.
Test Plan:
Tested using the python-phabricator module (very basic api wrapper).
The arc cli syntax was evading me.
```import base64
from phabricator import Phabricator
phab = Phabricator()
with open('mypic.jpg') as f:
encoded = base64.b64encode(f.read())
//set no-one as viewer which really means author only?
phab.file.upload(name='mypicnoone.jpg',
data_base64=encoded,
viewPolicy='no-one')
//set a specific phid as policy in this case a project
phab.file.upload(name='mypicphid.jpg',
data_base64=encoded,
viewPolicy='PHID-PROJ-fgvvnafmhvkgn2d5a4rf')
//no set policy ends up as 'users' i.e. ('all users')
phab.file.upload(name='mypicdefault.jpg', data_base64=encoded)```
Not able to really test canCDN attribute but it should be
fine and I tried to make it all consistent with D10166
Reviewers: 20after4, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: 20after4, epriestley, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10164
Summary: Minor correction to correct spelling of alternate (the 'n' was missing).
Test Plan: reviewer to verify correct spelling
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10175
Summary: Fixes T5735, setting up Phacility for huge financial success.
Test Plan:
opened up Safari - who logs in with Safari anyway? - and could still view a macro
could also view the list of macros
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5735
Differential Revision: https://secure.phabricator.com/D10170
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary: so you can see who the event is about...! Fixes T5621.
Test Plan: saw the creator of each event on /calendar/event/query/all/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5621
Differential Revision: https://secure.phabricator.com/D10169
Summary: Fixes T5773.
Test Plan: Made a poll and voted on it. Deleted it via ./bin/remove destory V1. No errors and the poll is gone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5773
Differential Revision: https://secure.phabricator.com/D10167
Summary: this data is a little weird since its user-entered and we need to put it in a web page un-escaped for the font to load correctly. Ergo, we use a regex to make the input safe / sane, and said regex needs to support a '.'. Fixes T5810.
Test Plan: added Fixedsys Excelsior 3.01 to my system and was able to set my preference and get the new font
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: dereckson, epriestley, Korvin
Maniphest Tasks: T5810
Differential Revision: https://secure.phabricator.com/D10163
Summary: This moves artifacts and build target messages into tabs.
Test Plan: Viewed build plan, saw the tabs appear when the steps had appropriate artifacts and / or messages.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10161
Summary: This automatically hides any empty build logs from Harbormaster, so that they do not appear.
Test Plan: Viewed a build plan where the logs were empty and didn't see them appear.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10091
Summary: Currently, we just create a default "backlog" column if / when you visit a workboard for the first time. Post this patch, instead you see a blocking dialog that lets you either create the default backlog column or import columns from another project. In the case of the latter, the user gets another dialog which lets them select any project of which they are a member that also has columns in it. Note that only not hidden columns get imported. Fixes T4431.
Test Plan:
- made a new workboard and got my new dialog. made a default backlog and it worked!
- made a new workboard again and tried the import flow - it also worked.
- verified projects with no columns do not show up in import dialog
- verified project with / without columns still all show up in maniphest project typeahead
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4431
Differential Revision: https://secure.phabricator.com/D10153
Summary: Ref T4896. This was used by the old audit comment storage, which is now defunct.
Test Plan: Grepped for callsites in the codebase.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10152
Summary:
Fixes T5728. In particular:
- `/tag/XYZ/` now works as an alias for `/tag/xyz/`.
- `arc todo --project ASDF` now works as an alias for `arc todo --project asdf`.
Test Plan: Called `project.query` and visited `/tag/LBHABLHBH/`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aklapper, epriestley
Maniphest Tasks: T5728
Differential Revision: https://secure.phabricator.com/D10144
Summary: Fixes T5510. This purely reduces false positives from HackerOne: we currently rotate CSRF tokens, but do not bind them explicitly to specific sessions. Doing so has no real security benefit and may make some session rotation changes more difficult down the line, but researchers routinely report it. Just conform to expectations since the expected behavior isn't bad and this is less work for us than dealing with false positives.
Test Plan:
- With two browsers logged in under the same user, verified I was issued different CSRF tokens.
- Verified the token from one browser did not work in the other browser's session.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5510
Differential Revision: https://secure.phabricator.com/D10136
Summary:
Fixes T5509. Currently, existing sessions live on even if you change your password.
Over the course of the program, we've recieved a lot of HackerOne reports that sessions do not terminate when users change their passwords. I hold that this isn't a security vulnerability: users can explicitly manage sessions, and this is more general and more powerful than tying session termination to password resets. In particular, many installs do not use a password provider at all (and no researcher has reported this in a general, application-aware way that discusses multiple authentication providers).
That said, dealing with these false positives is vaguely time consuming, and the "expected" behavior isn't bad for users, so just align behavior with researcher expectations: when passwords are changed, providers are removed, or multi-factor authentication is added to an account, terminate all other active login sessions.
Test Plan:
- Using two browsers, established multiple login sessions.
- In one browser, changed account password. Saw session terminate and logout in the second browser.
- In one browser, removed an authentication provider. Saw session terminate and logout in the second browser.
- In one browser, added MFA. Saw session terminate and logout in the second browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5509
Differential Revision: https://secure.phabricator.com/D10135
Summary:
Fixes T5506. Depends on D10133. When users remove an email address or change their primary email address, invalidate any outstanding password reset links.
This is a very small security risk, but the current behavior is somewhat surprising, and an attacker could sit on a reset link for up to 24 hours and then use it to re-compromise an account.
Test Plan:
- Changed primary address and removed addreses.
- Verified these actions invalidated outstanding one-time login temporary tokens.
- Tried to use revoked reset links.
- Revoked normally from new UI panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10134
Summary:
Ref T5506. This makes it easier to understand and manage temporary tokens.
Eventually this could be more user-friendly, since it's relatively difficult to understand what this screen means. My short-term goal is just to make the next change easier to implement and test.
The next diff will close a small security weakness: if you change your email address, password reset links which were sent to the old address are still valid. Although an attacker would need substantial access to exploit this (essentially, it would just make it easier for them to re-compromise an already compromised account), it's a bit surprising. In the next diff, email address changes will invalidate outstanding password reset links.
Test Plan:
- Viewed outstanding tokens.
- Added tokens to the list by making "Forgot your password?" requests.
- Revoked tokens individually.
- Revoked all tokens.
- Tried to use a revoked token.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10133
Summary:
Ref T4896. Now that we have a transaction editor, we can delete a giant block of hacks.
I believe this also resolves the commit/task attachment issues @joshuaspence and @mbishopim3 mentioned.
Test Plan: Attached and detached commits and tasks.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: mbishopim3, epriestley, joshuaspence
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10138
Summary: Ref T4896. I got this logic slightly wrong when porting it over: we always want to write this relationship, to allow members of a project with an audit request against a commit to resign and get it out of their queue.
Test Plan:
- Resigned from a commit with an existing relationship.
- Resigned from a commit with no existing relationship, saw one added.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10137
Summary:
Ref T4589. We don't recognize task descriptions as remarkup blocks, so `{F...}` references in them do not get attached to the objects, and thus no policy exemption is created.
Recognize them, which activates `{F...}` and `@mentions`.
We probably have a few more of these in other applications, but it's not a big deal to clean them up as they arise.
Test Plan: Uploaded a file to a task in the description field, saw it attach and get a policy exemption.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10139
Summary:
Ref T4589. When you look at a file, we load attached objects in order to run the "you can see this if you can see any attached object" policy check.
However, right now the subquery inherits the "throw on filter" flag from the parent query. This inheritance makes sense in other cases[1], but because this is an "ANY" rule it does not make sense here. In practice, it means that if the file is attached to several objects, and any of them gets filtered, you can not see the file.
Instead, explicitly drop the flag for this subquery.
[1] Sort of. It doesn't produce wrong results in other cases, but now that I think about it might produce a less-tailored error than it could. I'll look into this the next time I'm poking around.
Test Plan:
- Viewed an "All Users" file attached to a private Mock.
- Prior to this patch, I incorrectly received an exception when the Mock was loaded. This is wrong; I should be able to see the file because the policy is "All Users".
- After the patch, I can correctly view the file, just not the associated mock.
{F127074}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: 20after4, aran, epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D8498
Summary:
Fixes T4589. This implements much better policy behavior for files that aligns with user expectations.
Currently, all files have permissive visibility.
The new behavior is:
- Files uploaded via drag-and-drop to the home page or file upload page get permissive visibility, for ease of quickly sharing things like screenshots.
- Files uploaded via the manual file upload control get permissive visibility by default, but the user can select the policy they want at upload time in an explicit/obvious way.
- Files uploaded via drag-and-drop anywhere else (e.g., comments or Pholio) get restricted visibility (only the uploader).
- When the user applies a transaction to the object which uses the file, we attach the file to the object and punch a hole through the policies: if you can see the object, you can see the file.
- This rule requires things to use ApplicationTransactions, which is why this took so long to fix.
- The "attach stuff to the object" code has been in place for a long time and works correctly.
I'll land D8498 after this lands, too.
Test Plan:
- Uploaded via global homepage upload and file drag-and-drop upload, saw permissive visibility.
- Uploaded via comment area, saw restricted visibility.
- After commenting, verified links were established and the file became visible to users who could see the attached object.
- Verified Pholio (which is a bit of a special case) correctly attaches images.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10131
Summary: Ref T4589. Depends on D10129. In addition to letting users change the visibility policy for files, also allow them to choose a policy explicitly when a file is uploaded.
Test Plan: Uploaded several files using the plain old uploader, saw appropriate visibility policies applied.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10130
Summary: Ref T4589. Allow users to adjust visibility settings on files explicitly. This makes it easier to understand and manage upcoming changes in T4589.
Test Plan: Changed the view policy for a file several times.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10129
Summary: Ref T4896. This converts the last "CommentEditor" to a transaction editor and removes a large part of the old code.
Test Plan:
- Added comments.
- Accepted / added auditors.
- Added inline comments.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10128
Summary: Ref T4896. Invoke the new editor directly instead of in a roundabout way when handling Audit email.
Test Plan: Used `bin/mail receive-test` to simulate mail, saw comment post with proper content source.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10127
Summary: Ref T4896. Use the new transaction-oriented `PhabricatorAuditEditor` directly instead of invoking it via the old editor.
Test Plan: Used Conduit to add a comment, use silent mode, and accept a commit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10126
Summary: Ref T4896. Applies these actions using new transaction stuff.
Test Plan:
- Accepted and raised concern with my own commit, verifying the special project/package behavior.
- Accepted and raised concern with another author's commit, verifying the authority-over-packages/projects behavior.
- Accepted a commit I was not affiliated wiht, verifying the "join as an auditor" behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10125
Summary: Ref T4896. Hook these up with new stuff.
Test Plan:
- Closed an audit.
- Resigned from an audit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10124
Summary:
Ref T4896. Move the write for "Add Auditors" inside the new Editor.
There are no longer any readers or writers for metadata, so remove the calls for it.
Test Plan: Added auditors from the web UI.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10123
Summary:
Resolves T4659. This implements support for sorting tasks by custom fields.
Some of this feels hacky in the way it's hooked up to the Maniphest search engine and task query.
Test Plan: Queryed on a custom date field, with a small page size, and moved back and forth through the result set.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4659
Differential Revision: https://secure.phabricator.com/D10106
Summary: This class was renamed in D9991 but the filename is incorrect.
Test Plan: Eyeball it
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10118
Summary: Ref T4896. Instead of using custom stuff, use standard stuff.
Test Plan: Viewed a bunch of feed stories and published some over the Asana bridge.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10114
Summary: Ref T4896. Replace custom stuff with standard stuff.
Test Plan:
- Sent a bunch of email and it all looked sensible/correct.
- Made sure to test inlines, specifically, as they're a bit tricky.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10112
Summary: Ref T4896.
Test Plan: Made an unusual comment, then found it by searching.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10110
Summary:
Ref T4896. Replaces more custom stuff with standard stuff. In particular:
- No more fake proxy writes;
- no more fake detection of `@mentions`.
For now, the old code still applies most of the effects and handles feed and email.
Test Plan:
- Added comments.
- Added comments with inline comments.
- Added just inline comments.
- Added comments with Conduit.
- Previewed comments.
- Added CCs explicitly and with `@mentions`.
- Added auditors.
- Accepted a commit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10109
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary: This class was renamed in D9991, but the filename is incorrect.
Test Plan: Eyeball it
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10117
Summary:
Fixes T5666. When we have a pretty link right now it can conflict with form data; e.g. if you have 'statuses=open' in the URI and then uncheck status = open in the UI, you will still get the open status in the next search.
To fix this, set the form action explicitly to lose all the get parameter junk.
Test Plan: tried the test case in T5666 / this description and it no longer failed...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5666
Differential Revision: https://secure.phabricator.com/D10115
Summary:
pre-patch "Mark All Read" marks *all* unread notifications as read. This is a race condition in that the user is looking at some set of notiifcations and that set may update such that the newest notifications aren't shown. An example might be if sitting on the notifications page or having the menu open while a new notification comes in... Note re-opening the menu would show the latest notifications.
This patch makes it so "Mark All Read" links only marks the notifications currently loaded (and older.) Fixes T5764.
Additionally, if there is nothing to "mark read" the button / link "Mark All Read" will have a disabled style and yield a dialog saying "nothing to mark as read".
Test Plan: carefully tracked ?chronoKey populating correctly in various links. Verified query constructed properly too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5764
Differential Revision: https://secure.phabricator.com/D10113
Summary: $this->id wasn't being set in this case so just set it explicitly after we finish loading the project. Fixes T5763.
Test Plan: links were broken no longer!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5763
Differential Revision: https://secure.phabricator.com/D10108
Summary: This moves the status property of the build to the bottom of the property list so that it matches the build targets.
Test Plan: Viewed a build, saw the status in the right position.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10096
Summary: This shows the status icon and color along side the build status on the build view controller.
Test Plan: Viewed a build, saw the icon appear.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10094
Summary:
Ref T1049. This uses tabs on build targets to hide the configuration details and variables by default, instead promoting the target name, it's status and a description of the build step. The description is a new field on each build step.
The primary advantage of having a description on build steps is that DevOps can configure appropriate description information (including any troubleshooting information for build failures) on build steps, and developers who have builds fail against their code review can then look at this information.
Test Plan: Viewed a build plan and saw the appropriate information.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10093
Summary: Ref T1049. This hides the build target messages area if there are no messages for the target. Since most of the time a build target won't recieve any messages, this area is confusing because it's always empty.
Test Plan: Viewed a build, saw the empty build target message areas disappear.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10092
Summary: We've received feedback that the "core - exception" is incredibly confusing, to the point where developers see this and write off the build failure as a Phabricator error that is unrelated to their changes.
Test Plan: Ran a build with a `exit 1` run step, didn't see the "core - exception" appear.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10090
Summary: This fix is wrong - should be load and not get - but moreover this is actually correctly set as the reply handler is instantiated inside the DifferentialRevisionMailReceiver correctly; $this->getExclude was correct. Ref T5185.
Test Plan: this shall stop the fatal in production.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5185
Differential Revision: https://secure.phabricator.com/D10101
Summary: This makes input artifacts imply the appropriate build step dependencies in the build plan. That is, if you use a host artifact in a build step, it will then implicitly depend on the 'Lease Host' step.
Test Plan: Viewed the build plan with the artifacts, saw the dependencies. Ran a build, saw everything execute in the correct order.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10089
Summary: Ref T5185. By code inspection, I am pretty sure before this patch it was doing a set of a get on itself which does nothing. Now, being careful not to break Facebook we get the proper exclusion phids. I am pretty sure the folks in T5185 are experiencing this in Differential only.
Test Plan: Get some folks on T5185 to play with this
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5185
Differential Revision: https://secure.phabricator.com/D10087
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
Summary: Fixes T5751. Currently, we incorrectly overwrite `$xactions`.
Test Plan: Closed a blocking task, got an email about the correct transaction set ("closed task; added comment") instead of an overwritten transaction set ("closed blocking task").
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5751
Differential Revision: https://secure.phabricator.com/D10088
Summary: This was causing a crash according to a conversation with @rfergu in IRC. The issue is that if `$images_to_show` is empty, then `$image` never gets set, and it attempts to call `getID` on a null / unset variable.
Test Plan: @rfergu confirmed this fixed the crash.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, rfergu, epriestley
Differential Revision: https://secure.phabricator.com/D10073
Summary: Fixes T5653.
Test Plan: made a macro with sound and it played. changed it to not play and it did not play. changed it back and it played once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5653
Differential Revision: https://secure.phabricator.com/D10085
Summary:
This Fixes T5737. Apparently the functionality to search by different
statuses in differential was already there, but the options weren't
exposed in the frontend. I can't think of any reason why this should've
been the case, so I just added the other options.
Test Plan: Tested against some local diffs to match new query option.
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5737
Differential Revision: https://secure.phabricator.com/D10076
Summary: At least on my install, sorting was pretty borked from a type issue. (e.g. "unbreak now" of 100 sorting as less than "High" of 90). Fix this with some parseInt action. Also support adding new cards with the new colsort stuff. The clever bit here is to include the task ID in the sorting vector because the task ID wins ties at the moment I think / new tasks need to show up before older tasks when they are initially created. Fixes T5716.
Test Plan: added many "normal" priority cards and saw them fly in correctly. changed priority and moved correctly. made no edits and no moves were made correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5716
Differential Revision: https://secure.phabricator.com/D10081
Summary: been some changes here and this code was broked. turns out we re-assign $action like two lines later and never used the initial value, so we can simply delete the offending line. Fixes T5745.
Test Plan: submitted inline comment pre-patch and fatal. re-submitted post patch and great success!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5745
Differential Revision: https://secure.phabricator.com/D10078
Summary: Currently, content runs before header. Instead, run header, content, footer. This makes it easier to use `header.php` for includes, for Phacility.
Test Plan: Made Phacility blog work better, see next diff.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10067
Summary:
Ref T4896. Depends on D10056. Moves search indexing to standard infrastructure.
Also, fixes a bug where inline comments would not be indexed.
Test Plan: Used `bin/search index ... --trace` to view index construction of a commit, saw all the comments and inlines get indexed.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10057
