Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: Sets the `$can_edit` value correctly (previously it was hardcoded to `true`).
Test Plan: Went to http://phabricator.local/harbormaster/step/view/1/ and saw "Edit Step" disabled.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14373
Summary:
Fixes T9669. Two issues:
- We were using `repositoryPHIDs` instead of `blueprintPHIDs` for the list of allowed blueprints. Use the correct value.
- We weren't enforcing `allowedBlueprintPHIDs` fully correctly. We //did// require an authorization, so the net effect was correct in nearly all cases, but we could have selected from too large a pool in the case where the application itself was doing the authorization (e.g., from the command line).
Test Plan: Ran a build through Drydock/Harbormaster locally.
Reviewers: chad, tycho.tatitscheff
Reviewed By: chad, tycho.tatitscheff
Subscribers: tycho.tatitscheff
Maniphest Tasks: T9669
Differential Revision: https://secure.phabricator.com/D14368
Summary: Fixes T9674. This was wrong to start with (URI is `/edit/X/`, not `/X/edit/`) but we have a new view page anyway.
Test Plan:
- Visited an exmaple URI in my browser.
- Followed a build step link from "Authorized By: ..." in Drydock.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T9674
Differential Revision: https://secure.phabricator.com/D14366
Summary:
Ref T9252. Right now, we have very strict limits on Drydock: one lease per host, and one working copy per working copy blueprint.
These are silly and getting in the way of using "Land Revision" more widely, since we need at least one working copy for each landable repository.
For now, just remove the host limit and put a simple limit on working copies. This might need to be fancier some day (e.g., limit working copies per-host) but it is generally reasonable for the use cases of today.
Also add a `--background` flag to make testing a little easier.
(Limits are also less important nowadays than they were in the past, because pools expand slowly now and we seem to have stamped out all the "runaway train" bugs where allocators go crazy and allocate a million things.)
Test Plan:
- With a limit of 5, ran 10 concurrent builds and saw them finish after allocating 5 total resources.
- Removed limit, raised taskmaster concurrency to 128, ran thousands of builds in blocks of 128 or 256.
- Saw Drydock gradually expand the pool, allocating a few more working copies at first and a lot of working copies later.
- Got ~256 builds in ~140 seconds, which isn't a breakneck pace or anything but isn't too bad.
- This stuff seems to be mostly bottlenecked on `sbuild` throttling inbound SSH connections. I haven't tweaked it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14334
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
Summary: Fixes T9631. Build steps created before I added this option may not have it specified, which could throw later. Make handling a little more robust.
Test Plan: Will ask @yelirekim to report back.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9631
Differential Revision: https://secure.phabricator.com/D14336
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary: Updates Harbormaster for handleRequest over processRequest
Test Plan: Went through various Harbormaster areas, buildables, actions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14255
Summary: Ref T9252. Move these into a new "Drydock" group.
Test Plan: Clicked "Add Build Step", saw Drydock steps in a Drydock group.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14237
Summary:
Ref T9252. Currently, Harbormaster and Drydock work like this in some cases:
# Queue a lease for activation.
# Then, a little later, save the lease PHID somewhere.
# When the target/resource is destroyed, destroy the lease.
However, something can happen between (1) and (2). In Drydock this window is very short and the "something" would have to be a lighting strike or something similar, but in Harbormaster we wait until the resource activates to do (2) so the window can be many minutes long. In particular, a user can use "Abort Build" during those many minutes.
If they do, the target is destroyed but it doesn't yet have a record of the artifact, so the artifact isn't cleaned up.
Make these things work like this instead:
# Create a new lease and pre-generate a PHID for it.
# Save that PHID as something that needs to be cleaned up.
# Queue the lease for activation.
# When the target/resource is destroyed, destroy the lease if it exists.
This makes sure there's no step in the process where we might lose track of a lease/resource.
Also, clean up and standardize some other stuff I hit.
Test Plan:
- Stopped daemons.
- Restarted a build in Harbormaster.
- Stepped through the build one stage at a time using `bin/worker execute ...`.
- After the lease was queued, but before it activated, aborted the build.
- Processed the Harbormaster side of things only.
- Saw the lease get destroyed properly.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14234
Summary: Ref T9478. This should probably be configurable eventually, but for now treat any 200-block status as success. Also show the result code.
Test Plan:
- Hit a bad URI, saw "HTTP 503" + failure.
- Hit a good URI, saw "HTTP 200" + success.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9478
Differential Revision: https://secure.phabricator.com/D14226
Summary: Ref T9252. This variable was always wrong but we fell back to just resetting to `HEAD` before. Use the correct variable name.
Test Plan: Verified variable name.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14224
Summary: Ref T9352. See D13635. Build targets can have variables already, but let builds have them too. This mostly enables future use cases (sub-builds, more sophisticated build triggers).
Test Plan: With a custom Herald rule + action like the one in T9352, updated a revision and saw it generate multiple builds with varying parameters.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9352
Differential Revision: https://secure.phabricator.com/D14222
Summary: Ref T9494. Depends on D14216. Remove 10 copies of this code.
Test Plan: Ran `arc unit --everything`, browsed Config > Modules, clicked around Herald / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14217
Summary:
Ref T9252. This primarily allows Harbormaster to request (and Drydock to fulfill) working copies with a patch from a staging area. Doing this means we can do builds on in-review changes from `arc diff`.
This is a little cobbled-together but should basically work.
Also fix some other issues:
- Yielded, awakend workers are fine to update but could complain.
- We can't log slot lock failures to resources if we don't end up saving them.
- Killing the transaction would wipe out the log.
- Fix some TODOs, etc.
Test Plan: Ran Harbormaster builds on a local revision.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14214
Summary:
Ref T9252. This is the same as D14201, but for lease stuff instead of resource stuff.
This one is a little heavier but still feels pretty reasonable to me at the end of the day (worker is <1K lines and has a ton of comment stuff).
Also fixes a few random bugs I hit in the task queue.
Test Plan:
- Restarted some Harbormaster builds, saw them go through cleanly.
- Released pre-activation resources/leases.
- Probably still kinda buggy but I'll iron the details out over time.
Logs are starting to look somewhat plausible:
{F855747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14202
Summary:
Ref T9123. After recent changes, viewing a live build log from the web UI throws a CSRF exception.
Check `start` ("this object is an active log"), not `live` ("this log is open somewhere").
Test Plan: Will push / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14185
Summary:
Ref T9123. To run upstream builds in Harbormaster/Drydock, we need to be able to check out `libphutil`, `arcanist` and `phabricator` next to one another.
This adds an "Also Clone: ..." field to Harbormaster working copy build steps so I can type all three repos into it and get a proper clone with everything we need.
This is somewhat upstream-centric and a bit narrow, but I don't think it's totally unreasonable, and most of the underlying stuff is relatively general.
This adds some more typechecking and improves data/type handling for custom fields, too. In particular, it prevents users from entering an invalid/restricted value in a field (for example, you can't "Also Clone" a repository you don't have permission to see).
Test Plan: Restarted build, got a Drydock resource with multiple repositories in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14183
Summary:
Ref T9252. For building Phabricator itself, we need to have `libphutil/`, `arcanist/` and `phabricator/` next to one another on disk.
Expand the Drydock WorkingCopy resource so that it can have multiple repositories if the caller needs them.
I'm not sure if I'm going to put the actual config for this in Harbormaster or Drydock yet, but the WorkingCopy resource itself should work the same way in either case.
Test Plan: Restarted a Harbormaster build which leases a working copy, saw it build as expected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14180
Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary: Ref T9252. This mostly cleans up future and log handling, and edges us closer to being able to do useful work with Harbormaster / Drydock.
Test Plan:
- Added a "Run `ls -alh`" step to my trivial build plan.
- Ran it a bunch of times.
- Worked great.
- Also did an HTTP plan.
{F835227}
{F835228}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14161
Summary:
Fixes T9145. We currently restrict lint codes to 32 bytes, but PHPCS generates codes like "PHPCS.E.PEAR.Comments.Messages.Line.TooLong".
These codes seem reasonable as codes, and we don't currently have any key-length problems or other technical concerns with simply raising the size of this column.
Test Plan: Ran `bin/storage upgrade` to pick up adjustments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9145
Differential Revision: https://secure.phabricator.com/D14166
Summary: Ref T9252. This is still crude in a few ways but basically works, at least for commits.
Test Plan:
- Made a build plan with just this build step.
- Ran `bin/harbormaster build --plan 10 ...` on a commit.
- It actually built a working copy, leased it, took no action, and released the lease. MAGIC~~~
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14160
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary: You can already pass other icons, but this makes it a bit simpler.
Test Plan: Test Maniphest, Badges
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14131
Summary: Fixes T9380. See that task for discussion. This doesn't feel awesome but is maybe the least-bad fix? I think this name is clearer.
Test Plan: Looked at autoplan in Harbormaster, saw new name.
Reviewers: meitros, chad
Reviewed By: chad
Maniphest Tasks: T9380
Differential Revision: https://secure.phabricator.com/D14088
Summary: Ref T9134. It looks like this functionality was removed in D13848.
Test Plan: Submitted a diff successfully.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9134
Differential Revision: https://secure.phabricator.com/D13869
Summary: Ref T1049. This ensures the Harbormaster build target is associated with leases, so in the future we can query things and find out whether builds are still running with associated leases.
Test Plan: Leased a host, checked the DB and saw the field populated.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10870
Summary: Ref T9205. This is a likely fix.
Test Plan: This isn't straightforward to test in the upstream unless you have custom code on top of it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9205
Differential Revision: https://secure.phabricator.com/D13928
Summary: Fixes T8659. This isn't //explicitly// documented but I'm going to wait for a bit until the "Harbormaster" doc splits into internal/external builds to add docs for it. There's other similar stuff coming soon anyway.
Test Plan:
{F716439}
{F716440}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13903
Summary:
Ref T8659. In the general case, this eventually allows build processes to do things like:
- Upload build results (like a ".app" or ".exe" or other binary).
- Pass complex results between build steps (e.g., build step A does something hard and build step B uses it to do something else).
Today, we're a long way away from having the infrastructure for that. However, it is useful to let third party build processes (like Jenkins) upload URIs that link back to the external build results.
This adds `harbormaster.createartifact` so they can do that. The only useful thing to do with this method today is have your Jenkins build do this:
params = array(
"uri": "https://jenkins.mycompany.com/build/23923/details/",
"name": "View Build Results in Jenkins",
"ui.external": true,
);
harbormaster.createartifact(target, 'uri', params);
Then (after the next diff) we'll show a link in Differential and a prominent link in Harbormaster. I didn't actually do the UI stuff in this diff since it's already pretty big.
This change moves a lot of code around, too:
- Adds PHIDs to artifacts.
- It modularizes build artifact types (currently "file", "host" and "URI").
- It formalizes build artifact parameters and construction:
- This lets me generate usable documentation about how to create artifacts.
- This prevents users from doing dangerous or policy-violating things.
- It does some other general modernization.
Test Plan:
{F715633}
{F715634}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13900
Summary: Use `PhutilClassMaQuery` instead of `PhutilSymbolLoader`, mostly for consistency. Depends on D13588.
Test Plan: Poked around a bunch of pages.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13589
Summary:
Ref T8096. Hit this on IRC:
> epriestley: what's in the Messages tab?
> jdoe: what Messages tab??!
> epriestley: ughhhh
Test Plan: Clicked "Messages" tab, saw helpful "no messages" message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13846
Summary:
Fixes T7370. Two changes:
- Make the default to show nothing, instead of showing all the data. This is a better default because the data is sometimes sensitive. Workers should have to opt in to revealing it.
- For TargetWorkers, link to the target (technically the build, for now, since there's no dedicated target detail page).
Test Plan: {F698325}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7370
Differential Revision: https://secure.phabricator.com/D13845
Summary: Ref T8096. Like stop/start, autoplans are pushed into the system from outside (normally by `arc`) so it doesn't make any sense to run them manually.
Test Plan:
- Tried to run an autoplan from web UI, got an error.
- Ran a normal plan from web UI.
- Tried to run an autoplan from CLI, got an error.
- Ran a noraml plan from CLI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13844
Summary: Fixes T8657. "Auto" builds are pushed into Harbormaster by an external system (currently, `arc`) so it does not make sense to stop or resume them: Harbormaster has no way to control the external system.
Test Plan:
- Tried to restart an autobuild, got an error.
- Restarted a normal build.
- Did "Restart All" on a buildable, got restarts on non-autoplans and no restarts on autoplans.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8657
Differential Revision: https://secure.phabricator.com/D13812
Summary: Ref T8089. There's still some cleanup but none of it needs to block this.
Test Plan: Viewed `/applications/`, read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: devurandom, swisspol
Maniphest Tasks: T8089
Differential Revision: https://secure.phabricator.com/D13811
Summary:
Ref T8089. We have a lot of broken/confusing/prototype build steps that I want to hide from users when we unprototype Harbormaster.
The dialog is also just kind of unwieldy.
Organize this UI a little better and put all the sketchy junk in a "prototypes" group that you can't see unless prototypes are enabled.
This doesn't break anything (the old steps will still work fine), but should reduce user confusion.
Test Plan:
Old UI:
{F691439}
New UI (prototypes off):
{F691440}
New UI (prototypes on):
{F691441}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8089
Differential Revision: https://secure.phabricator.com/D13803
Summary: Fixes T7419. This doesn't really do anything, just adds documentation.
Test Plan:
- Read the documentation:
{F688899}
- Created a build plan which makes an HTTP request to `example.com` and waits for a result.
- Ran that build plan manually.
- Called `harbormaster.sendmessage` manually with the example lint/unit values to provide a result.
- Saw the results report correctly and the message ("fail") process as expected:
{F688902}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7419
Differential Revision: https://secure.phabricator.com/D13789
Summary: Use `PhutilClassMapQuery` where appropriate.
Test Plan: Browsed around the UI to verify things seemed somewhat working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13429
