Summary:
Depends on D20177. Fixes T12425. See <https://discourse.phabricator-community.org/t/importing-libphutil-repository-on-fresh-phabricator-triggers-an-error/2391/>.
Search indexing currently reports failures to load objects to the log. This log is noisy, not concerning, not actionable, and not locally debuggable (it depends on the reporting user's entire state).
I think one common, fully legitimate case of this is indexing temporary files: they may fully legitimately be deleted by the time the indexer runs.
Instead of sending these errors to the log, eat them. If users don't notice the indexes aren't working: no harm, no foul. If users do notice, we'll run or have them run `bin/search index` as a first diagnostic step anyway, which will now report an actionable/reproducible error.
Test Plan:
- Faked errors in both cases (initial load, re-load inside the locked section).
- Ran indexes in strict/non-strict mode.
- Got exception reports from both branches in strict mode.
- Got task success without errors in both cases in non-strict mode.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12425
Differential Revision: https://secure.phabricator.com/D20178
Summary:
Ref T13249. See PHI810. We currently show availability dots in some interfaces (timeline, mentions) but not others (typeheads/tokenizers).
They're potentially quite useful in tokenizers, e.g. when assigning tasks to someone or requesting reviews. Show them in more places.
(The actual rendering here isn't terribly clean, and it would be great to try to unify all these various behaviors some day.)
Test Plan:
{F6212044}
{F6212045}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20173
Summary:
Ref T13249. Ref T11738. See PHI985. Currently, we have a crude heuristic for guessing what line in a source file provides the best context.
We get it wrong in a lot of cases, sometimes selecting very silly lines like "{". Although we can't always pick the same line a human would pick, we //can// pile on heuristics until this is less frequently completely wrong and perhaps eventually get it to work fairly well most of the time.
Pull the logic for this into a separate standalone class and make it testable to prepare for adding heuristics.
Test Plan: Ran unit tests, browsed various files in the web UI and saw as-good-or-better context selection.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249, T11738
Differential Revision: https://secure.phabricator.com/D20171
Summary: Stragglers from the great "%Q" migration.
Test Plan: Ran a query for tasks with parent tasks.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20183
Summary:
Ref T13249. See PHI1059. Currently, Subscribe/Unsubscribe require CAN_INTERACT via the web UI and no permissions (i.e., effectively CAN_VIEW) via the API.
Weaken the requirements from the web UI so that you do not need "CAN_INTERACT". This is a product change to the effect that it's okay to subscribe/unsubscribe from anything you can see, even hard-locked tasks. This generally seems reasonable.
Increase the requirements for the actual transaction, which mostly applies to API changes:
- To remove subscribers other than yourself, require CAN_EDIT.
- To add subscribers other than yourself, require CAN_EDIT or CAN_INTERACT. You may have CAN_EDIT but not CAN_INTERACT on "soft locked" tasks. It's okay to click "Edit" on these, click "Yes, override lock", then remove subscribers other than yourself.
This technically plugs some weird, mostly theoretical holes in the API where "attackers" could sometimes make more subscription changes than they should have been able to. Now that we send you email when you're unsubscribed this could only really be used to be mildly mischievous, but no harm in making the policy enforcement more correct.
Test Plan: Against normal, soft-locked, and hard-locked tasks: subscribed, unsubscribed, added and removed subscribers, overrode locks, edited via API. Everything worked like it should and I couldn't find any combination of lock state, policy state, and edit pathway that did anything suspicious.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20174
Summary:
Ref T13249. See PHI1059. This allows "locked" in `maniphest.statuses` to specify that either "comments" are locked (current behavior, advisory, overridable by users with edit permission, e.g. for calming discussion on a contentious issue or putting a guard rail on things); or "edits" are locked (hard lock, only task owner can edit things).
Roughly, "comments" is a soft/advisory lock. "edits" is a hard/strict lock. (I think both types of locks have reasonable use cases, which is why I'm not just making locks stronger across the board.)
When "edits" are locked:
- The edit policy looks like "no one" to normal callers.
- In one special case, we sneak the real value through a back channel using PolicyCodex in the specific narrow case that you're editing the object. Otherwise, the policy selector control incorrectly switches to "No One".
- We also have to do a little more validation around applying a mixture of status + owner transactions that could leave the task uneditable.
For now, I'm allowing you to reassign a hard-locked task to someone else. If you get this wrong, we can end up in a state where no one can edit the task. If this is an issue, we could respond in various ways: prevent these edits; prevent assigning to disabled users; provide a `bin/task reassign`; uh maybe have a quorum convene?
Test Plan:
- Defined "Soft Locked" and "Hard Locked" statues.
- "Hard Locked" a task, hit errors (trying to unassign myself, trying to hard lock an unassigned task).
- Saw nice new policy guidance icon in header.
{F6210362}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20165
Summary:
Ref T13248. This will probably need quite a bit of refinement, but we can reasonably allow subtype definitions to adjust custom field behavior.
Some places where we use fields are global, and always need to show all the fields. For example, on `/maniphest/`, where you can search across all tasks, you need to be able to search across all fields that are present on any task.
Likewise, if you "export" a bunch of tasks into a spreadsheet, we need to have columns for every field.
However, when you're clearly in the scope of a particular task (like viewing or editing `T123`), there's no reason we can't hide fields based on the task subtype.
To start with, allow subtypes to override "disabled" and "name" for custom fields.
Test Plan:
- Defined several custom fields and several subtypes.
- Disabled/renamed some fields for some subtypes.
- Viewed/edited tasks of different subtypes, got desired field behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13248
Differential Revision: https://secure.phabricator.com/D20161
Summary:
Ref T13253. Fixes T6615. See that task for discussion.
- Remove three keys which serve no real purpose: `dataID` doesn't do anything for us, and the two `leaseOwner` keys are unused.
- Rename `leaseOwner_2` to `key_owner`.
- Fix an issue where `dataID` was nullable in the active table and non-nullable in the archive table.
In practice, //all// workers have data, so all workers have a `dataID`: if they didn't, we'd already fatal when trying to move tasks to the archive table. Just clean this up for consistency, and remove the ancient codepath which imagined tasks with no data.
Test Plan:
- Ran `bin/storage upgrade`, inspected tables.
- Ran `bin/phd debug taskmaster`, worked through a bunch of tasks with no problems.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13253, T6615
Differential Revision: https://secure.phabricator.com/D20175
Summary: Ref T13088. Prepares for putting test names in a separate table to release the 255-character limit.
Test Plan: Viewed revisions, buildables, builds, test lists, specific tests.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20179
Summary:
See PHI1073. Improve the UX here:
- When there are a small number of connected tasks, no changes.
- When there are too many total connected tasks, but not too many directly connected tasks, show hint text with a "View Standalone Graph" button to view more of the graph.
- When there are too many directly connected tasks, show better hint text with a "View Standalone Graph" button.
- Always show a "View Standalone Graph" option in the dropdown menu.
- Add a standalone view which works the same way but has a limit of 2,000.
- This view doesn't have "View Standalone Graph" links, since they'd just link back to the same page, but is basically the same otherwise.
- Increase the main page task limit from 100 to 200.
Test Plan:
Mobile View:
{F6210326}
Way too much stuff:
{F6210327}
New persistent link to the standalone page:
{F6210328}
Kind of too much stuff:
{F6210329}
Standalone view:
{F6210330}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: 20after4
Differential Revision: https://secure.phabricator.com/D20164
Summary:
Ref T13249. See PHI774. When users follow an email login link ("Forgot password?", "Send Welcome Email", "Send a login link to your email address.", `bin/auth recover`), we send them to a password reset flow if an install uses passwords.
If an install does not use passwords, we previously dumped them unceremoniously into the {nav Settings > External Accounts} UI with no real guidance about what they were supposed to do. Since D20094 we do a slightly better job here in some cases. Continue improving this workflow.
This adds a page like "Reset Password" for "Hey, You Should Probably Link An Account, Here's Some Options".
Overall, this stuff is still pretty rough in a couple of areas that I imagine addressing in the future:
- When you finish linking, we still dump you back in Settings. At least we got you to link things. But better would be to return you here and say "great job, you're a pro".
- This UI can become a weird pile of buttons in certain configs and generally looks a little unintentional. This problem is shared among all the "linkable" providers, and the non-login link flow is also weird.
So: step forward, but more work to be done.
Test Plan: {F6211115}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20170
Summary: Ref T13249. Poll for Duo updates in the background so we can automatically update the UI when the user clicks the mobile phone app button.
Test Plan: Hit a Duo gate, clicked "Approve" in the mobile app, saw the UI update immediately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20169
Summary:
Depends on D20175. Ref T12425. Ref T13253. Currently, importing commits can stall search index rebuilds, since index rebuilds use an older priority from before T11677 and weren't really updated for D16585.
In general, we'd like to complete all indexing tasks before continuing repository imports. A possible exception is if you rebuild an entire index with `bin/search index --rebuild-the-world`, but we could queue those at a separate lower priority if issues arise.
Test Plan: Ran some search indexing through the queue.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13253, T12425
Differential Revision: https://secure.phabricator.com/D20177
Summary: Ref T13250. Some of these parameters may be NULL, and `alter()` is no longer happy about that.
Test Plan: Ran daemon tasks that happened to render some memes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20176
Summary:
In D20100, I changed this page from returning a `newPage()` with a dialog as its content to returning a more modern `newDialog()`.
However, the magic to add stuff to the CSP header is actually only on the `newPage()` pathway today, so this accidentally dropped the extra "Content-Security-Policy" rule for Google.
Lift the magic up one level so both Dialog and Page responses hit it.
Test Plan:
- Configured Recaptcha.
- Between D20100 and this patch: got a CSP error on the Email Login page.
- After this patch: clicked all the pictures of cars / store fronts.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20163
Summary:
Ref T6703. When we import external data from a third-party install to a Phacility instance, we must link instance accounts to central accounts: either existing central accounts, or newly created central accounts that we send invites for.
During this import, or when users register and claim those new accounts, we do a write from `admin.phacility.com` directly into the instance database to link the accounts.
This is pretty sketchy, and should almost certainly just be an internal API instead, particularly now that it's relatively stable.
However, it's what we use for now. The process has had some issues since the introduction of `%R` (combined database name and table refrence in queries), and now needs to be updated for the new `providerConfigPHID` column in `ExternalAccount`.
The problem is that `%R` isn't doing the right thing. We have code like this:
```
$conn = new_connection_to_instance('turtle');
queryf($conn, 'INSERT INTO %R ...', $table);
```
However, the `$table` resolves `%R` using the currently-executing-process information, not anything specific to `$conn`, so it prints `admin_user.user_externalaccount` (the name of the table on `admin.phacility.com`, where the code is running).
We want it to print `turtle_user.user_externalaccount` instead: the name of the table on `turtle.phacility.com`, where we're actually writing.
To force this to happen, let callers override the namespace part of the database name.
Long term: I'd plan to rip this out and replace it with an API call. This "connect directly to the database" stuff is nice for iterating on (only `admin` needs hotfixes) but very very sketchy for maintaining.
Test Plan: See next diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20167
Summary:
Ref T13250. This internally calls `replaceQueryParam(X, null)` now, which fatals if the second parameter is `null`. I hit these legitimately, but I'll look for more callsites and follow up by either allowing this, removing `alter()`, fixing the callsites, or some combination.
(I'm not much of a fan of `alter()`.)
Test Plan: Browsing a paginated list no longer complains about URI construction.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20162
Summary: Ref T13250. See D20149. Mostly: clarify semantics. Partly: remove magic "null" behavior.
Test Plan: Poked around, but mostly just inspection since these are pretty much one-for-one.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20154
Summary: Ref T13250. See D20149. In a number of cases, we use `setQueryParams()` immediately after URI construction. To simplify this slightly, let the constructor take parameters, similar to `HTTPSFuture`.
Test Plan: See inlines.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20151
Summary:
Ref T13249. See <https://discourse.phabricator-community.org/t/configuring-the-number-of-taskmaster-daemons/2394/>.
Today, when a configuration value is "locked", we prevent //writes// to the database. However, we still perform reads. When you upgrade, we generally don't want a bunch of your configuration to change by surprise.
Some day, I'd like to stop reading locked configuration from the database. This would defuse an escalation where an attacker finds a way to write to locked configuration despite safeguards, e.g. through SQL injection or policy bypass. Today, they could write to `cluster.mailers` or similar and substantially escalate access. A better behavior would be to ignore database values for `cluster.mailers` and other locked config, so that these impermissible writes have no effect.
Doing this today would break a lot of installs, but we can warn them about it now and then make the change at a later date.
Test Plan:
- Forced a `phd.taskmasters` config value into the database.
- Saw setup warning.
- Used `bin/config delete --database phd.taskmasters` to clear the warning.
- Reviewed documentation changes.
- Reviewed `phd.taskmasters` documentation adjustment.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20159
Summary: See PHI823. These got "visual-only" but should acutally get "aural => false" to pick up "aria-hidden".
Test Plan: Viewed page source, saw both "visual-only" and "aria-hidden".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20157
Summary: Ref T13249. See D20132. Although we're probably a poor way to validate a big list of stolen cards in practice in production today (it's very hard to quickly generate a large number of small charges), putting rate limiting on "Add Payment Method" is generally reasonable, can't really hurt anything (no legitimate user will ever hit this limit), and might frustrate attackers in the future if it becomes easier to generate ad-hoc charges (for example, if we run a deal on support pacts and reduce their cost from $1,000 to $1).
Test Plan: Reduced limit to 4 / hour, tried to add a card several times, got rate limited.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20158
Summary:
Ref T13250. Ref T13249. Some remarkup rules, including `{image ...}` and `{meme ...}`, may cache URIs as objects because the remarkup cache is `serialize()`-based.
URI objects with `query` cached as a key-value map are no longer valid and can raise `__toString()` fatals.
Bump the cache version to purge them out of the cache.
Test Plan: See PHI1074.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250, T13249
Differential Revision: https://secure.phabricator.com/D20160
Summary:
See <https://discourse.phabricator-community.org/t/conduit-call-is-generating-phd-log-error-message/2380/>. If you run builds against a diff which is not attached to a revision (this is unusual) we still try to publish to the associated revision. This won't work since there is no associated revision.
Since bare diffs don't really have a timeline, just publish nowhere for now.
Test Plan:
- Created a diff.
- Did not attach it to a revision.
- Created a build plan with "make http request + wait for response".
- Manually ran the build plan against the bare diff.
- Used `bin/phd debug task` to run the build and hit a "revision not attached" exception during publishing.
- Applied patch.
- Ran `bin/phd debug task`, got clean (no-op) publish.
- Sent build a failure message with "harbormaster.sendmessage", got a failed build.
This isn't a real workflow, but shouldn't fail.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20156
Summary:
Depends on D20126. See PHI1056. Ref T13244.
- `bin/audit delete` destroys audit requests, but does not update the overall audit state for associated commits. For example, if you destroy all audit requests for a commit, it does not move to "No Audit Required".
- `bin/audit synchronize` does this synchronize step, but is poorly documented.
Make `bin/audit delete` synchronize affected commits.
Document `bin/audit synchronize` better.
There's some reasonable argument that `bin/audit synchronize` perhaps shouldn't exist, but it does let you recover from an accidentally (or intentionally) mangled database state. For now, let it live.
Test Plan:
- Ran `bin/audit delete`, saw audits destroyed and affected commits synchornized.
- Ran `bin/audit synchronize`, saw behavior unchanged.
- Ran `bin/audit help`, got better help.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20127
Summary:
Depends on D20119. Fixes T9512. When you don't have a password on your account, the "Password" panel in Settings is non-obviously useless: you can't provide an old password, so you can't change your password.
The correct remedy is to "Forgot password?" and go through the password reset flow. However, we don't guide you to this and it isn't really self-evident.
Instead:
- Guide users to the password reset flow.
- Make it work when you're already logged in.
- Skin it as a "set password" flow.
We're still requiring you to prove you own the email associated with your account. This is a pretty weak requirement, but maybe stops attackers who use the computer at the library after you do in some bizarre emergency and forget to log out? It would probably be fine to just let users "set password", this mostly just keeps us from having two different pieces of code responsible for setting passwords.
Test Plan:
- Set password as a logged-in user.
- Reset password on the normal flow as a logged-out user.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: revi
Maniphest Tasks: T9512
Differential Revision: https://secure.phabricator.com/D20120
Summary:
Depends on D20117. Fixes T10071. When you're sent an email invitation, it's intended to allow you to register an account even if you otherwise could not (see D11737).
Some time between D11737 and today, this stopped working (or perhaps it never worked and I got things wrong in D11737). I think this actually ended up not mattering for us, given the way Phacility auth was ultimately built.
This feature generally seems reasonable, though, and probably //should// work. Make it work in the "password" and "oauth" cases, at least. This may //still// not work for LDAP, but testing that is nontrivial.
Test Plan:
- Enabled only passwords, turned off registration, sent an invite, registered with a password.
- Enabled only Google OAuth, turned off registration, sent an invite, registered with Google OAuth.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10071
Differential Revision: https://secure.phabricator.com/D20118
Summary:
Depends on D20113. Ref T6703. Continue moving toward a future where multiple copies of a given type of provider may exist.
Switch MFA from session-MFA at the start to one-shot MFA at the actual link action.
Add one-shot MFA to the unlink action. This theoretically prevents an attacker from unlinking an account while you're getting coffee, registering `alIce` which they control, adding a copy of your profile picture, and then trying to trick you into writing a private note with your personal secrets or something.
Test Plan: Linked and unlinked accounts. Refreshed account. Unlinked, then registered a new account. Unlinked, then relinked to my old account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20117
Summary: Depends on D20112. Ref T6703. When you go to unlink an account, unlink it by ID. Crazy!
Test Plan: Unlinked and relinked Google accounts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20113
Summary:
Depends on D20111. Ref T6703. Currently, each ExternalAccount row is tied to a provider by `providerType` + `providerDomain`. This effectively prevents multiple providers of the same type, since, e.g., two LDAP providers may be on different ports on the same domain. The `domain` also isn't really a useful idea anyway because you can move which hostname an LDAP server is on, and LDAP actually uses the value `self` in all cases. Yeah, yikes.
Instead, just bind each account to a particular provider. Then we can have an LDAP "alice" on seven different servers on different ports on the same machine and they can all move around and we'll still have a consistent, cohesive view of the world.
(On its own, this creates some issues with the link/unlink/refresh flows. Those will be updated in followups, and doing this change in a way with no intermediate breaks would require fixing them to use IDs to reference providerType/providerDomain, then fixing this, then undoing the first fix most of the way.)
Test Plan: Ran migrations, sanity-checked database. See followup changes for more comprehensive testing.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20112
Summary:
Ref T6703. Currently, when you create an account on a new install, we prompt you to select a password.
You can't actually use that password unless you set up a password provider, and that password can't be associated with a provider since a password provider won't exist yet.
Instead, just don't ask for a password: create an account with a username and an email address only. Setup guidance points you toward Auth.
If you lose the session, you can send yourself an email link (if email works yet) or `bin/auth recover` it. This isn't really much different than the pre-change behavior, since you can't use the password you set anyway until you configure password auth.
This also makes fixing T9512 more important, which I'll do in a followup. I also plan to add slightly better guideposts toward Auth.
Test Plan: Hit first-time setup, created an account.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: revi
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20111
Summary: Depends on D20109. Ref T6703. This flow was contributed in 2012 and I'm not sure it ever worked, or at least ever worked nondestructively. For now, get rid of it. We'll do importing and external sync properly at some point (T3980, T13190).
Test Plan: Grepped for `ldap/`, grepped for controller.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T6703
Differential Revision: https://secure.phabricator.com/D20110
Summary:
Ref T13250. A handful of callsites are doing `getRequestURI()` + `setQueryParams(array())` to get a bare request path.
They can just use `getPath()` instead.
Test Plan: See inlines.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20150
Summary: See PHI1068. We currently show "HTTP Error - 200", which is misleading. Instead, label these results as "HTTP Status Code".
Test Plan: {F6206016}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20148
Summary:
Ref T13250. See PHI1069. This is a small fix for `getRequestURI()` currently not working if the request includes "x[]=..." PHP-flavored array parameters, beacause they're parsed into arrays by `$_GET` and `setQueryParams(...)` no longer accepts nonscalars.
Instead, just parse the raw request URI.
Test Plan: Visited `/search/hovercard/?phids[]=X`, no more fatal. Dumped the resulting URI, saw it had the right value. Tried `?phids[]=x&x=1&x=1&x=1`, saw the parameters correctly preserved.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20147
Summary: See D20136. This method is sort of inherently bad because it is destructive for some inputs (`x=1&x=2`) and had "PHP-flavored" behavior for other inputs (`x[]=1&x[]=2`). Move to explicit `...AsMap` and `...AsPairList` methods.
Test Plan: Bit of an adventure, see inlines in a minute.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20141
Summary:
Depends on D20140. Ref T13250. Currently, the top-level exception handler doesn't dump stacks because we might not be in debug mode, and we might double-extra-super fatal if we call `PhabricatorEnv:...` to try to figure out if we're in debug mode or not.
We can get around this by setting a flag on the Sink once we're able to confirm that we're in debug mode. Then it's okay for the top-level error handler to show traces.
There's still some small possibility that showing a trace could make us double-super-fatal since we have to call a little more code, but AphrontStackTraceView is pretty conservative about what it does and 99% of the time this is a huge improvement.
Test Plan: {F6205122}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20142
Summary:
Depends on D20137. Ref T13250. Ref T12101. In versions of PHP beyond 7, various engine errors are gradually changing from internal fatals or internal errors to `Throwables`, a superclass of `Exception`.
This is generally a good change, but code written against PHP 5.x before `Throwable` was introduced may not catch these errors, even when the code is intended to be a top-level exception handler.
(The double-catch pattern here and elsewhere is because `Throwable` does not exist in older PHP, so `catch (Throwable $ex)` catches nothing. The `Exception $ex` clause catches everything in old PHP, the `Throwable $ex` clause catches everything in newer PHP.)
Generalize some `Exception` into `Throwable`.
Test Plan:
- Added a bogus function call to the rendering stack.
- Before change: got a blank page.
- After change: nice exception page.
{F6205012}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250, T12101
Differential Revision: https://secure.phabricator.com/D20138
Summary:
Ref T13250. When exceptions occur in display/rendering/writing, they currently go straight to the fallback handler. This is a minimal handler which doesn't show a stack trace or include any debugging details.
In some cases, we have to do this: some of these exceptions prevent us from building a normal page. For example, if the menu bar has a hard fatal in it, we aren't going to be able to build a nice exception page with a menu bar no matter how hard we try.
However, in many cases the error is mundane: something detected something invalid and raised an exception during rendering. In these cases there's no problem with the page chrome or the rendering pathway itself, just with rendering the page data.
When we get a rendering/response exception, try a second time to build a nice normal exception page. This will often work. If it doesn't work, fall back as before.
Test Plan:
- Forced the error from T13250 by applying D20136 but not D20134.
- Before:
{F6205001}
- After:
{F6205002}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20137
Summary:
Depends on D20138. Ref T13250. This improves exception behavior and gives us a standard page with a stack trace instead of a text fatal with no stack trace.
Truly a great day for PHP.
(Eventually we may want to replace all `(string)` with `phutil_string_cast()`, but let's let it have some time in the wild first?)
Test Plan: Triggered the error, got a more useful exception behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20140
Summary: See D20126. I was trying to be a little too cute here with the names and ended up confusing myself, then just tested the method behavior. :/
Test Plan: Persudaded by arguments in D20126.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20135
Summary:
Ref T13250. Currently, datasources have a `setParameters(...)` method. This method accepts a dictionary and adds the key/value pairs to the raw HTTP request to the datasource endpoint.
Since D20049, this no longer works. Since D20116, it fatals explicitly.
In general, the datasource endpoint accepts other values (like `query`, `offset`, and `limit`), and even before these changes, using secret reserved keys in `setParameters(...)` would silently cause program misbehavior.
To deal with this, pass parameters as a JSON string named "parameters". This fixes the HTTP query issue (the more pressing issue affecting users today) and prevents the "shadowing reserved keys" issue (a theoretical issue which might affect users some day).
(I may revisit the `phutil_build_http_querystring()` behavior and possibly let it make this work again, but I think avoiding the duplicate key issue makes this change desirable even if the querystring behavior changes.)
Test Plan:
- Used "Land Revision", selected branches.
- Configured a custom Maniphest "users" field, used the search typeahead, selected users.
- Manually browsed to `/typeahead/class/PhabricatorPeopleDatasource/?query=hi¶meters=xyz` to see the JSON decode exception.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13250
Differential Revision: https://secure.phabricator.com/D20134
Summary:
Ref T13244. See PHI1059. When you lock a task, users who can edit the task can currently override the lock by using "Edit Task" if they confirm that they want to do this.
Mark these edits with an emblem, similar to the "MFA" and "Silent" emblems, so it's clear that they may have bent the rules.
Also, make the "MFA" and "Silent" emblems more easily visible.
Test Plan:
Edited a locked task, overrode the lock, got marked for it.
{F6195005}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aeiser
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20131
Summary: Ref T13244. See PHI1052. Our error handling for Stripe errors isn't great right now. We can give users a bit more information, and a less jarring UI.
Test Plan:
Before (this is in developer mode, production doesn't get a stack trace):
{F6197394}
After:
{F6197397}
- Tried all the invalid test codes listed here: https://stripe.com/docs/testing#cards
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13244
Differential Revision: https://secure.phabricator.com/D20132
