Summary:
Ref T11650. Currently, we load packages and then discard the archived ones.
However, this gets "dominion" rules (where a more-general package gives up ownership if a more-specific package exists) wrong if the more-specific package is archived: we incorrectly give up ownership.
Instead, just ignore these packages completely when loading affected packages. This is slightly simpler.
(There are technically two pieces of code we have to do this for, which should be a single piece of code but which haven't yet been unified.)
Test Plan:
- Created packages:
- Package A, on "/" (strong dominion, autoreview).
- Package B, on "/x/" (weak dominion, autoreview).
- Package C, on "/x/y" (archived, autoreview).
- Create a revision affecting "/x/y".
- Saw correct path ownership in table of contents ("B", strongest package only).
- Saw correct autoreview behavior (A + B).
- (Prior to patch, in `master`, reproduced the problem behaviors described in T11650, with bad dominion rules and failure to autoreview B.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11650
Differential Revision: https://secure.phabricator.com/D16564
Summary:
Fixes T11610. Clean up some sketchy old code from long ago.
If you had rules that use conditions like "Accepted revision exists" and ran them in the test console, we'd never load the "CommitData" and fatal.
Instead, load CommitData in `newTestAdapter()` and generally make these pathways a little more modern.
Test Plan:
- Wrote an "Accepted Revision Exists" rule.
- Ran a commit in the test console.
- Before patch, got fatal from T11610.
- After patch, got clean test result.
- Also pushed a commit and reviewed the transcript to make sure the rule ran properly.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T11610
Differential Revision: https://secure.phabricator.com/D16522
Summary:
This is hacky, and I'm not sure I'm happy with it; Until T9365 is done, this will show up
broken tests with an appropriate star in the Revision History.
Test Plan: Created 1M messages in a couple of old diffs in a revision. The query took ~80us (On SSD drive).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16483
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary: Ref T11132. This is a new default default (no dashboard) homepage. It offers (Diffs) (Tasks) (Repositories) in the main column and (Feed) in the side column. No NUX stuff, No logged out public view (upcoming diff). This should be complete, but unclear how to bucketize Differential.
Test Plan: Test new account's default homepage.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16449
Summary: This needs an `isset()` for cases when authority and packages don't completely overlap.
Test Plan:
- With a package set to trigger autoreview, created a revision.
- Observed error log, saw no more error.
- Saw package trigger autoreview properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16398
Summary:
Fixes T9719. Currently, the Herald "Test Console" has a big `instanceof` thing, so new adapters (like a Calendar adapter, or third-party adapters) aren't available automatically. Instead, do a standard modular thing: load the available adapters, ask which ones can test the object the user selected, then let the user pick which one they want to move forward with.
Additionally, it isn't very clear that you can't test "commit hook" rules because they rely on push state which we don't really have a good way to simulate. When the user picks a commit, we now show them the "Hook" events, but the options are disabled and explain why they can not be selected.
Test Plan:
- Ran test rules for revisions, commits, mocks, tasks, wiki documents, questions, and outbound mail.
- Plugged in a commit, got a more-helpful choice screen explaining why you do a test run of hook rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9719
Differential Revision: https://secure.phabricator.com/D16360
Summary:
Ref T11404. Depends on D16351. Currently, both `differential.query` and `differential.revision.search` issue `2N` queries to fetch:
- dependencies for each revision; and
- projects for each revision.
Fix this:
- Take these custom fields out of Conduit so they don't load this data by default.
- For `differential.query`, put this data back in by hard coding it.
- For `differential.revision.search`, just leave it out. You can already optionally get projects efficiently, and this endpoint is a work in progress. I would tentatively be inclined to expose graph data as a "graph" extension once we need it.
This makes both methods execute in `O(1)` time (which is still 20-30 queries, but at least it's not 320 queries anymore).
Test Plan:
- Ran `differential.query`, observed no change in results but 199 fewer internal queries.
- Ran `differential.revision.search`, observed data gone from results and 200 fewer internal queries.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16352
Summary:
Ref T11404. Depends on D16350.
Currently, custom fields can issue "N+1" queries in some cases, so querying 100 revisions issues 100 extra queries.
This affects all `*.search` endpoints for objects with custom fields, and some older endpoints (notably `differential.query`).
This change bulk loads "normal" custom fields, which gets rid of some of these queries. Instead of loading fields for each object, we build a big list of all fields and load them all at once.
The next change will tackle the remaining inefficient edge queries.
Test Plan:
- Configured a custom field with normal database storage in Differential.
- Ran `differential.query`, looking at custom fields in results for correctness.
- Ran `differential.revision.search`, looking at custom fields in results for correctness.
- In both cases, observed queries drop from `3N` to `2N` (all the "normal" custom field stuff got bulk loaded).
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16351
Summary: Ref T10909. Ref T9224. We label this field "Host" in the UI; make the storage format consistent.
Test Plan:
- Viewed month view, day view, detail view of an event.
- Created a new event, saw myself as the host.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9224, T10909
Differential Revision: https://secure.phabricator.com/D16291
Summary: Fixes T11305, Ref T7754. Makes this menu dropdown act like actions and collapse to a fa-bars menu.
Test Plan:
View on mobile, desktop, browser. Click an action, spawn new page.
{F1717953}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7754, T11305
Differential Revision: https://secure.phabricator.com/D16265
Summary:
Ref T4788. As it turns out, our tasks are very tightly connected.
Instead of loading every parent/child task, then every parent/child of those tasks, etc., etc., only load tasks in the "same direction" that we're already heading.
For example, we load children of children, but not parents of children. And we load parents of parents, but not children of parents.
Basically we only go "up" and "down" now, but not "out" as much. This should reduce the gigantic multiple-thousand-node graphs currently shown in the UI.
I still discover the whole graph for revisiosn, because I think it's probably more useful and always much smaller. That might need adjustment too, though.
Test Plan: Seems fine locally??
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16218
Summary:
Ref T4788. This separates the revision graph view into a base class with core logic and a revision class with Differential-specific logic, so I can subclass it in Maniphest, etc., and try using it in other applications to show similar graphs.
Not sure if we'll stick with it, but even if we don't this makes the code a bit cleaner and gets custom rendering logic out of the RevisionViewController, which is nice.
Test Plan: Viewed revisions, saw the stack UI completely unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16213
Summary: Ref T10628. Turn these into tabs in a single box, since "local commits" and "similar revisions" are of particularly rare use.
Test Plan: {F1707196}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16209
Summary:
Ref T10628. Switch this to be nicer and more modern.
- When there's only one tab, add an option to hide it.
Test Plan:
- Viewed normal revisions (no tabs).
- Viewed X vs Y revisions (two tabs, rightmost tab selected by default).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16206
Summary: Fixes T11240. Also simplify things a little and share a bit more code.
Test Plan:
- Viewed revisions and tasks, opened submenu.
- Viewed as a user without edit permission, saw the menus greyed out.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11240
Differential Revision: https://secure.phabricator.com/D16201
Summary: Ref T4788. This moves everything except "merge" to the new code.
Test Plan:
- Edited relationships in Differential, Diffusion, and Pholio.
- Uninstalled Pholio, made sure "Edit Mocks..." actions vanished.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16193
Summary:
Ref T9838.
Add a Properties field to Revision, and update a `wasAcceptedBeforeClose` when closing a revision.
Test Plan:
A quick run through the obvious steps (Close with commit/manually, with or w/o accept) and calling `differential.query` shows the `wasAcceptedBeforeClose` property was setup correctly.
Pushing closed + accepted passes the relevant herald, which was my immediate issue; Pushing un-accepted is blocked.
Test the "commit" rule (Different from "pre-commit") by hacking the DB and running the "has accepted revision" rule in a test-console.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T9838
Differential Revision: https://secure.phabricator.com/D15085
Summary:
Ref T11179. This generates the Maniphest menu items in a modular way. It doesn't change any of the underlying code yet.
Searching for commits doesn't work particularly well so I've just hidden that for now, but the item itself works fine.
Test Plan: {F1696849}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11179
Differential Revision: https://secure.phabricator.com/D16162
Summary:
Ref T11035. This only fixes half of the issue: comment editing has been fixed, but normal transactions which edit things like descriptions haven't yet.
The normal edits aren't fixed because the "oldValues" are populated too late. The code should start working once they get populated sooner, but I don't want to jump the gun on that since it'll probably have some spooky effects. I have some other transaction changes coming down the pipe which should provide a better context for testing "oldValue" population order.
Test Plan:
- Mentioned `@dog` in a comment.
- Removed `@dog` as a subscriber.
- Edited the comment, adding some unrelated text at the end (e.g., fixing a typo).
- Before change: `@dog` re-added as subscriber.
- After change: no re-add.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11035
Differential Revision: https://secure.phabricator.com/D16108
Summary:
When having lots of repos, seeing "all revisions in this project" is hard, and we ended up adding herald rules to basically copy project tags to the revisions on a per-project basis. Adding a "tagged: project" function to the Repositories search field allows users to find differentials within a project.
Fix T10850.
Test Plan: search differentials by tagging project and repository in the Repository field
Reviewers: avivey, epriestley, #blessed_reviewers
Reviewed By: avivey, epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10850
Differential Revision: https://secure.phabricator.com/D16096
Summary: Ref T11123. This implements a very basic skeleton for modern revision search.
Test Plan: Viewed and executed Conduit API method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11123
Differential Revision: https://secure.phabricator.com/D16089
Summary:
Ref T10856. The rendering logic was already there, but it was expecting the information under `properties`
field, whereas arc puts it under `metadata`. Not sure if that something that changed a long time ago or if
it was always like this.
Test Plan: {F1252657 size=full}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10856
Differential Revision: https://secure.phabricator.com/D15828
Summary: Ref T4103. Fully modernize the filetree show/hide, durable column show/hide, and profile menu collapse/wide settings.
Test Plan:
- Toggled filetree on/off, reloaded page, setting stuck.
- Same with conpherence column and profile menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16034
Summary: Change metamta.differential.patch-format over to an enum option now that they're implemented.
Test Plan: Looked at settings page.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16032
Summary:
Ref T11092. With Quicksand (or, possibly, some as-yet-unknown non-Quicksand workflow) the client can get stuck with an out-of-date revision PHID.
We then save comments with a `revisionPHID` from one revision and a `changesetID` from a different one.
Detect and prevent this. This stops the workflow immediately when the use first clicks, so it should allow us to detect this issue if it has some other non-Quicksand cause.
Test Plan:
- Opened revision `D123`.
- Pressed `\` to enable the sidebar and Quicksand.
- Clicked a link to revision `D124`.
- Added inlines.
Previously, these could ghost. The exact UI behavior is difficult to describe, but in the database they end up with a `changesetID` for `D124` but the original `revisionPHID` for `D123`, presumably because state is sticking around from the first page.
After this patch, an exception is thrown immediately. Additionally:
- Reloaded to clear quicksand state, added comments fine.
- Disabled sidebar/quicksand, added comments fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11092
Differential Revision: https://secure.phabricator.com/D16031
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Ref T10769. The user availability cache write shouldn't happen in read-only mode, nor should the Differential parse cache write.
(We might want to turn off the availbility feature completely since it's potentially expensive if we can't cache it, but I think we're OK for now.)
Test Plan:
In read-only mode:
- Browsed as a user with an out-of-date availability cache.
- Loaded an older revision without cached parse data.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D15988
Summary:
Ref T11051. This is still not as clear as it should be, but is at least working as intended now.
I believe this part of the code just never worked. The test plan on D10489 didn't specifically cover it.
Test Plan:
Did this sort of thing in a repository:
```
$ git checkout -b featurex
$ echo x >> y
$ git commit -am wip
$ arc diff
```
Then I simulated just pushing it (this flow is a little more involved than necessary):
```
$ arc land --hold
$ git commit --amend
$ # remove all metadata -- particularly, "Differential Revision"!
$ git push HEAD:master
```
I got a not-great but more-useful dialog:
{F1667318}
Prior to this change, the hash match was incorrectly not reported at all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11051
Differential Revision: https://secure.phabricator.com/D15989
Summary: Fixes T11010. This also needs to be inflated until we fix the whole client/server responsibility issue here.
Test Plan:
- Created a revision while observing error log, no error.
- Disabled "allow self accept", tried to make myself a reviewer, got rejected with an error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11010
Differential Revision: https://secure.phabricator.com/D15966
Summary:
Ref T10939. This makes the `viewer()` function work again. It retains its own meaning (viewer, plus all their projects and packages).
There's no `exact-viewer()` function; we could conceivably add one eventually if we need it.
Test Plan:
- Queried for `viewer()`, got the same results as querying by my own username.
- Browsed function in token browser.
- Reviewed autogenerated documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15951
Summary:
Ref T10939. If you haven't installed a dashboard, we show an "Active Revisions" panel on the homepage by default. I waited a bit to update this, but the new buckets don't seem to have caused any major problems so far.
Update this to use the new logic. I'm just showing "must review" + "should review", which is similar to the old beahvior.
Also replace the notification count with this same number. This is a little different from the old behavior, but simpler, and I think we should probably move toward getting rid of these counts completely.
Test Plan:
- Viewed homepage as logged-in user, saw my revisions (including revisions I have authority over only because of project membership).
- Saw consistent notification count.
- Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15950
Summary:
Ref T10694. If this feels good, I'd plan to eventually add something similar to other applications ("View Task", etc).
Not sure if we should keep the object link later in the mail body or not. I left it for now.
Test Plan: {F1307256, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10694
Differential Revision: https://secure.phabricator.com/D15884
Fixes T10981. Ref T10939. `arc` currently has some odd, hard-coded checks
(missing reviewers, all reviewers away) that depend on the field value being
in a certain format.
The recent changes swapped the field value from scalars (PHIDs) to
dictionaries and broke this workflow. It worked fine in testing because we
apply these checks very inconsistently (not on update or `--edit`).
To get around this for now, serialize into "PHID!" and then unserialize on
the other side. This is icky but keeps us from needing to require an `arc`
upgrade.
These checks are generally bad news and should move to the server side in the
long run (T4631).
(This probably prevents clean `arc diff`, so I'm just cowboy committing it.)
Auditors: chad
Summary: Ref T10939. This adds UI, transactions, etc, to adjust dominion rules.
Test Plan:
- Read documentation.
- Changed dominion rules.
- Created packages on `/` ("A") and `/x` ("B") with "Auto Review: Review".
- Touched `/x`.
- Verified that A and B were added with strong dominion.
- Verified that only B was added when A was set to weak dominion.
- Viewed file in Diffusion, saw correct ownership with strong/weak dominion rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15936
Summary: Ref T10939. Fixes T4887. Supports "username!" to add a reviewer as blocking.
Test Plan: Added and removed blocking and non-blocking reviewers via CLI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4887, T10939
Differential Revision: https://secure.phabricator.com/D15934
Summary:
Ref T10939. Adds a `blocking(...)` token.
This code is pretty iffy and going to get worse before it gets better, but the fix (T10967 + EditEngine) is going to be a fair chunk of work down the road.
Test Plan: {F1426966}
Reviewers: chad
Reviewed By: chad
Subscribers: scode
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15933
Summary:
Ref T10939. I don't think this is hugely important, but it doesn't clutter things up much and it's nice as a hint.
T4055 was the original request specifically asking for this. It wanted a separate bucket, but I think this use case isn't common/strong enough to justify that.
I would like to improve Differential's "X depends on Y" feature in the long term. We don't tend to use/need it much, but it could easily do a better and more automatic job of supporting review of a group of revisions.
Test Plan: {F1426636}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15930
Summary: Ref T10939. These poor stragglers got left out in the rain. Didn't catch any issues otherwise.
Test Plan: {F1426604}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15929
Summary: Ref T10939. For various historical reasons, revision status is a numeric string. This comparison fails because it's `(string) !== (int)`. Just use `!=` so this will still work if we turn it into a real string in the future.
Test Plan: Tried a more specific test case locally, got better looking results in "Must Review" and "Should Review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15928
Summary:
Ref T10939. I'm not //totally// opposed to the existence of this element, but I think it's the kind of thing that would never make it upstream today. I think this should just be a T418 custom sort of thing in the long run, not a mainline upstream feature.
Overall, I think this thing is nearly useless and just adds visual clutter. My dashboard is about 100% red. This also sort of teaches users that it's fine to let revisions sit for a couple of days, which isn't what I'd like the UI to teach. Finally, removing it helps the UI feel a little less cluttered after the visually busy changes in D15926.
Test Plan: Grepped for removed config. Viewed revision list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15927
Summary:
Ref T10939. Fixes T9263. Ref T4144.
First, this resolves users (converting users into all packages and projects they are responsible for) earlier, so bucketing can act on that data correctly. Previously, your own blocking reviews would appear in "Must Review" but your packages/projects' would not. Now, all of them will.
Second, this adds `exact(username)` to mean "just me, not my packages/projects". You can use this along with "Bucket: By Required Action" to create a personal view of "Active Revisions" if you'd like, and ignore all your project/package reviews.
Test Plan: Queried by "me" and "exact(me)", got reasonable looking results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T9263, T10939
Differential Revision: https://secure.phabricator.com/D15925
Summary:
Ref T10939. Ref T4144. This splits the existing buckets ("Blocking Others", "Action Required", "Waiting on Others") into 6-7 buckets with a stronger focus on what the next action you need to take is.
See T10939#175423 for some discussion.
Overall, I think some of the root problems here are caused by reviewer laziness and shotgun review workflows (where a ton of people get automatically added to everything, probably unnecessarily), but these buckets haven't been updated since the introduction of blocking reviewers or project/package reviewers and I think splitting the 3 buckets into 6 buckets isn't unreasonable, even though it's kind of a lot of buckets and the root problem here is approximately "I want to ignore a bunch of stuff on my dashboard".
I didn't remove the old bucketing code yet since it's still in use on the default homepage.
This also isn't quite right until I fix the tokenizer to work properly, since it won't bucket project/package reviewers accurately.
Test Plan: {F1395972}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15924
Summary:
Ref T10939. Currently, Differential hard-codes some behaviors for the "active" filter. This introduces "buckets" to make this grouping behavior more general/flexible.
The buckets don't actually do any grouping yet, this just gets rid of the `$query === 'active'` stuff so far.
These buckets change the page size to a large value, becuase pagination won't currently work with bucketing.
The problem is that we normally paginate by selecting one more result than we need: so if we're building a page of size 10, we'll select 11 results. This is fast, and if we get 11 back, we know there's a next page with at least one result on it.
With buckets, we can't do this, since our 11 results might come back in these buckets:
- A, B, C, A, C, C, A, A, B, B, (B)
So we know there are more results, and we know that bucket B has more results, but we have no clue if bucket A and bucket C have more results or not (or if there's anything in bucket D, etc).
We might need to select a thousand more results to get the first (D) or the next (A).
So we could render something like "Some buckets have more results, click here to go to the next page", but users would normally expect to be able to see "This specific bucket, A, has more results.", and we can't do that without a lot more work.
It doesn't really matter for revisions, because almost no one has 1K of them, but this may need to be resolved eventually.
(I have some OK-ish ideas for resolving it but nothing I'm particularly happy with.)
Test Plan: {F1376542}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15923
Summary:
Ref T10939. Ref T4144. This moves the revision SearchEngine to modern code so I can add some kind of bucketing layer on top of it.
This seems to have worked pretty cleanly. One thing is that I removed the ability to search for "pending drafts":
- This was added in D1927 from a bootcamp task, was an indirect solution to a questionable problem, and almost certainly would not meet the bar today.
- Later, in D3324, we added the icons to the list. I think this is a better solution in general. In particular, it specifically addressed the query being kind of junky.
- At the time, Differential had a prebuilt "Drafts" filter. This was removed in D6347 with the move to ApplicationSearch, which simplified the large number of prebuilt filters. Although we got a lot of feedback about that, none requested that the drafts filter be restored.
Test Plan: Searched for responsible users, subscribers, orders, projects, repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4144, T10939
Differential Revision: https://secure.phabricator.com/D15921
Summary:
Ref T10939. If you already own a package, don't trigger the subscribe/review rules.
Document how these rules work.
Test Plan:
- Read documentation.
- Removed reviewers, updated a revision, got autoreviewed.
- Joined package.
- Removed reveiwers, updated a revision, no more autoreview.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10939
Differential Revision: https://secure.phabricator.com/D15918
