Summary: Ref T5833. See that task for functional goals and some discussion of design.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10713
Summary: Ref T2787. When order statuses change, send merchants and users email about it.
Test Plan: Used `bin/mail` to review mail.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10694
Summary: Ref T2787. I mostly just want these in place so I can glue emails to them, but they're also useful on their own.
Test Plan: {F216515}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10688
Summary:
Ref T2787. Make this a little more concrete with explicit membership instead of a general edit policy. In particular, we need to know who to email when orders happen, and can't reasonably do that with an edit policy.
I imagine this might eventually get more nuanced (e.g., users who can only approve orders vs users who can manage the merchant itself) but that's a long ways away.
Test Plan: {F216284}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10681
Summary: Ref T5835. Make fund stories publish to feed and send email.
Test Plan: Made edits, etc., saw them in feed and outbound email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10677
Summary:
Ref T2787. This has some rough edges but basically works.
- Users can cancel orders that are in incomplete states (or in complete states, if the application allows them to -- for example, some future application might allow cancellation of billed-but-not-shipped orders).
- Merchant controllers can partially or fully refund orders from any state after payment.
Test Plan: This is still rough around the edges, but issued Stripe and WePay refunds.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10664
Summary:
Ref T2787.
- Allow merchants to disable payment providers.
- Show more useful information about providers on the payments page.
- Make test vs live more clear.
- Show merchant status.
- Add a description to merchants to flesh them out a bit -- the merchant areas of responsibilities seem to be fitting well with accounts, etc.
Test Plan: {F215109}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10662
Summary:
Ref T2787. Builds on D10649 by rebining existing objects (carts, charges, etc) to merchantPHIDs and providerPHIDs instead of an implicit global merchant and weird global artifacts (providerType / providerKey).
Basically:
- When you create something that users can pay for, you specify a merchant to control where the payment goes.
- Accounts are install-wide, but payment methods are bound to merchants. This seems to do a reasonable job of balancing usability and technical concerns.
- Replace a bunch of weird links between objects with standard PHIDs.
- Improve "add payment method" flow.
Test Plan: Went through the Fund flow with Stripe and WePay, funding an initiative.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10652
Summary:
Ref T2787. Instead of making providers global configuration, make them a thing on merchants with web configuration.
Payment methods and some of the pyament workflow needs to be retooled a bit after this, but this seemed like a reasonable cutoff point for this diff.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10649
Summary:
Ref T2787. Currently, you add payment providers (Stripe, Paypal, etc) in global configuration.
Generally, this approach is cumbersome, limiting, and often hard for users to figure out. It also doesn't provide a natural way to segment payment receivers or provide web access to administrative payment functions like issuing refunds, canceling orders, etc. I think that stuff definitely needs to be in the web UI, and the rule for access to it can't reasonably just be "all administrators" in a lot of reasonable cases.
The only real advantage is that it prevents an attacker from adjusting settings and pointing something at an account they control. But this attack can be mitigated through notifications, some sort of CLI-only merchant lock, payment accounts being relatively identifiable, etc.
So introduce "merchants", which are basically payable entities. An individual merchant will have attached Paypal, Stripe, etc., accounts, and access rules. When you buy something in an application, the merchant to pay is also specified. They also provide an umbrella for dealing with permissions down the line.
This may get a //little// cumbersome because if there are several merchants your saved card information is not shared across them. I think that will be fine in the normal case (most installs will have only one merchant). Even if it isn't and we leave providers global, I think introducing this is the right call from a web UI / permissions point of view. I'll play around with it in the next couple of diffs and figure out exactly where the line goes.
Test Plan: Listed, created, edited, viewed merchants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10648
Summary: Ref T2787. Similar to D10634, give applications more control over the cart workflow. For now this just means they get to pick exit URIs, but in the future they can manage more details of cart behavior.
Test Plan: Funded an initiative and got returned to the initiative instead of dead-ending in Phortune.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10638
Summary: Ref T2787. `Product` is currently a fairly heavy object, but as Phortune develops it makes a lot of sense to make it a lighter object and put more product logic in applications. Convert it into a fairly lightweight reference to applications. The idea is that Phortune is mostly providing a cart flow, and applications manage the details of products.
Test Plan: Funded an initiative for $1.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10634
Summary:
Ref T2787. Phortune currently stores a bunch of stuff as `...inUSDCents`. This ends up being pretty cumbersome and I worry it will create a huge headache down the road (and possibly not that far off if we do Coinbase/Bitcoin soon). Even now, it's more of a pain than I figured it would be.
Instead:
- Provide an application-level serialization mechanism.
- Provide currency serialization.
- Store currency in an abstract way (currently, as "1.23 USD") that can handle currencies in the future.
- Change all `...inUSDCents` to `..asCurrency`.
- This generally simplifies all the application code.
- Also remove some columns which don't make sense or don't make sense anymore. Notably, `Product` is going to get more abstract and mostly be provided by applications.
Test Plan:
- Created a new product.
- Purchased a product.
- Backed an initiative.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10633
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191. Long ago, Maniphest generated with 40-character mail keys. These prevent the migration to `bytes20`. We had about 300 of these on secure.phabricator.com from several years ago.
Just truncate them. This adjusts reply-to addresses, but it's very likely that none are relevant anymore.
Test Plan: Ran migration on `secure.phabricator.com` to truncate keys.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10615
Summary: Ref T1191. This predates the mdoern patch stuff and may exist on very, very old installs. By the time they apply this patch, it's guaranteed it won't matter anymore. Drop it to make the schemata consistent with expectations.
Test Plan: Ran patch on installs with and without the table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10611
Summary:
Ref T1191. This destroys surplus columns:
- Pholio's transaction comments have a `mockID` column, but this is not used. The `imageID` column is used instead.
- Phragment has an unused `description` column.
- Releeph has an unused `summary` column.
Test Plan:
- Grepped for usage of these columns.
- Checked that these exist in production, too.
- Ran upgrades.
- Added Pholio inline comments.
- Saw fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10591
Summary:
Ref T1191. Notable:
- Drops a very old saved query table. See comments inline: plan was to remove it after a year. It's been ~a year and two weeks.
- This has our only fulltext index. I'm not supporting that formally for now, but left a note.
- This has our only MyISAM table. I'm not supporting that explicitly for now, but it shouldn't affect anything. I may deal with this in the future.
- These tables don't actually write directly via Lisk, so there's some fiddling to get the schemata right.
Test Plan: Down to ~250 warnings. No more surplus databases or tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10589
Summary:
Ref T1191.
- Removes ponder comment table. This was migrated a very long time ago.
Test Plan:
- Grepped for removed table.
- Saw ~100 fewer issues in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10582
Summary:
Ref T1191. Notes:
- Drops the project affiliation table. This is a very old membership table which was migrated to edges.
- Drops the subproject table. This is a very old table for a removed feature.
Test Plan:
- Grepped for dropped tables.
- Saw ~100 fewer setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10581
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary:
Ref T1191.
- This drops two tables.
- Both tables were migrated to transactions a very long time ago and no longer have readers or writers.
Test Plan: Saw ~150 fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10576
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191.
- There was a varchar(50) column. I changed it to `text64`, since this length is unusual.
- There was an int(3) column. I changed it to `int32`, since this length is unusual.
Test Plan: Ran migrations, saw warnings disappear from config tool.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10524
Summary: Ref T1191. This was migrated to transactions a very long time ago.
Test Plan: Ran migration, grepped, left comments in Slowvote.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10523
Summary:
Ref T1191.
- Fixes T6096. We've migrated away from this table in T4896. The data is now in the transaction table. There have been no reads or writes to this table for some time and I haven't seen any issues from users.
- Fixes T6097. Same deal as above. The data is now in the transaction comment table.
- Fixes T6100. This cache is safe to wipe out, since it's purely read-through. Wiping it will make the migration faster. The column type change fixes storage of PHP serialized objects in a text column.
Test Plan:
- Ran migrations.
- Observed some yellow go blue on the Database Status screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6096, T6100, T6097, T1191
Differential Revision: https://secure.phabricator.com/D10520
Summary:
Fixes T5603. Puts the toggling of locking membership into the editor so we get exceptions and all that.
I think the dialogue when you try to leave a project that is locked could be a little better maybe? Right now it just says "You can't leave" and "The membership is locked" more or less; should I surface a link to the policy stuff there too?
Test Plan:
- made a project, toggled the "lock" setting, observed stickiness and good transactions being made
- locked a project and tried to leave as a non-editor - got a dialogue letting me know i couldn't
- locked a project and tried to leave as an editor - left successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5603
Differential Revision: https://secure.phabricator.com/D10508
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Ref T5835. This is still completely made up (no payment integration), but you can "back" an initiative, type a number in the box, and generate a database row. You can then seach for backers and things you've backed and such.
Notable changes:
- Renamed "FundBacking" to "FundBacker". The former name was sort of because you can back things multiple times, but stuff like `$backings` was just too weird.
- I think that's it?
Test Plan:
- Backed an initiative.
- Viewed that I became a backer.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10486
Summary:
Ref T5835. This is all pretty boilerplate, and does not interact with Phortune at all yet.
You can create "Initiatives", which have a title and description, and support most of the expected infrastructure (policies, transactions, mentions, edges, appsearch, remakrup, etc).
Only notable decisions:
- Initiatives have an explicit owner. I think it's good to have a single clearly-responsible user behind an initiative.
- I think that's it?
Test Plan:
- Created an initiative.
- Edited an initiative.
- Changed application policy defaults.
- Searched for initiatives.
- Subscribed to an initiative.
- Opened/closed an initiative.
- Used `I123` and `{I123}` in remarkup.
- Destroyed an initiative.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10481
Summary:
Fixes T6013. Old image macros/memes never had the file edge written.
We also never wrote file edges for audio.
Finally, the meme controller didn't allow public access.
Write edges for images and audio, perform a migration to populate the historic ones, and make the Editor keep them up to date going forward.
Test Plan:
- Updated image, saw new image attach and old image detach.
- Updated audio, saw new audio attach and old audio detach.
- Ran migration.
- Viewed memes as a logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6013
Differential Revision: https://secure.phabricator.com/D10411
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Ref T5932. Ref T5936. This implements build generations in Harbormaster, which provides the infrastructure required to both show users the previous states of restarted builds and to allow users to forcefully abort builds (and their targets).
You can view previous generations of a build by adding `?g=<n>` to the URI, but this isn't exposed in the UI anywhere yet.
Test Plan: Ran a build plan with a Sleep step in it. Reconfigured it for various sleep times and viewed previous generations of the build after restarting it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5932, T5936
Differential Revision: https://secure.phabricator.com/D10321
Summary: Resolves T5895. This reduces page load times significantly when looking at builds.
Test Plan: Viewed a build, saw the page load a lot faster.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5895
Differential Revision: https://secure.phabricator.com/D10286
Summary: Ref T5884. We migrated with "canCDN" and then had live writes with "cancdn". Move everything to "canCDN" for consistency.
Test Plan: Ran migration, verified DB only has "canCDN" afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10273
Summary: Ref T5819. Implements basic icon and color filtering for projects.
Test Plan: {F189350}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D10230
Summary:
Ref T1049. This keeps track of how long a build target takes to execute in Harbormaster and displays it in the build view page. I'm not sure whether "Started" is really that useful once the target has completed?
Also, I change the name of the time taken depending on whether or not the target has completed; if it's still in progress it's called "Elapsed" and if it's completed then it's "Duration". The primary reason for this is that "Duration" sounds like post tense, whereas "Elapsed" is current tense. I'm not sure whether this is okay or not?
Test Plan: Ran a Sleep build step and saw the target dates / times appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: talshiri, epriestley, Korvin
Maniphest Tasks: T5824, T1049
Differential Revision: https://secure.phabricator.com/D10174
Summary:
Fixes T5840. Some time ago I incorrectly believed that `latin1_bin` collation was synonymous with "binary". It is not, and does not permit UTF8 characters outside of BMP, among other sequences.
These two tables currently have `LONGTEXT` columns which should be `LONGBLOB`. The table design is explicilty intended to accommodate invalid/unreasonably long ref names, but the collation prevents this from working properly.
After T1191, we'll have a general system for resolving this, but a user hit an issue yesterday (T5840) with a brnach name containing Chinese characters.
Test Plan:
- Tried emoji inserts into both tables, was rebuffed.
- Ran migration.
- Performed emoji inserts into both tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5840
Differential Revision: https://secure.phabricator.com/D10217
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary:
Ref T1049. This uses tabs on build targets to hide the configuration details and variables by default, instead promoting the target name, it's status and a description of the build step. The description is a new field on each build step.
The primary advantage of having a description on build steps is that DevOps can configure appropriate description information (including any troubleshooting information for build failures) on build steps, and developers who have builds fail against their code review can then look at this information.
Test Plan: Viewed a build plan and saw the appropriate information.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10093
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
Summary:
Ref T4896. Depends on D10052. This is the major/scary migration, but not really so bad. It is substantially similar to D8210, but less complex because there are fewer actions here.
This moves `PhabricatorAuditComment` storage to `PhabricatorAuditTransaction`, then reads `PhabricatorAuditComment`s as a proxy around the new objects.
Test Plan:
- Before migrating, browsed around. Nothing appeared broken.
- Migrated cleanly.
- Viewed old transactions (inlines, comments, accept/reject/etc, add auditors, add ccs, implicit CCs).
- Added all of those comment types.
- Edited a draft.
- Deleted a draft.
- Spot checked the database for sanity.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10055
Summary:
Ref T4896. This is substantially similar to D8196.
Migrate the comment text out of the `audit_comment` table and into the `audit_transaction_comment` table. Do double reads on `PhabricatorAuditComment` so the APIs aren't disturbed. The old table is still updated.
Test Plan:
- Before applying migration, cleared cache and browsed around. Things looked fine, except no comment text.
- Applied migration.
- Cleared cache, browsed around, saw all my old comments.
- Added some new comments.
- Spot checked migrated and new rows in database.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10020
Summary:
Ref T4896. This is substantially identical to the process which Differential followed, and mostly copied from the original Differential migration and the Differential proxy object.
Basically, we move all the data over but the application can't tell, and the same APIs do reads and writes to the new table.
Test Plan:
- Browsed UI before migrating, everything looked fine (but no inlines).
- Ran migration.
- Verified draft and published comments survived migration.
- Added a draft.
- Previewed draft.
- Submitted draft.
- Viewed standalone with drafts and published comments.
- Sanity checked data in database, didn't see anything unusual.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10018
Summary:
Ref T4896. This adds the new storage, without any code changes.
This storage is substantially identical to the Differential storage, except that `changesetID` has been replaced by `pathID`.
I've retained the properties intended to be used to implement T1460. They might not be quite right, but at least we'll be able to make any fixes consistently to both applications. For now, these fields are empty and ignored.
Test Plan: Ran `./bin/storage upgrade`. Nothing calls this code yet.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10017
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary:
Ref T2787. Carts need a status so we can tell if they've been purchased. Also kind of get WePay working as a one-time provider, and let charges not have a methodPHID (they won't for one-time providers).
All the status stuff is still super crazy rough and you can do things like start a checkout, add a bunch of stuff to your cart, complete the checkout, and have Phabricator think you paid for all the stuff you added. But this is fine for now since you can't actually edit carts, and also none of this is at all usable anyway. I'll refine some of the workflows in future diffs, for now I'm just getting things hooked up and technically working.
Test Plan:
- Purcahsed a cart and got a sort of status/done screen instead of a "your money is gone" exception.
- Went through the WePay flow and got a successful test checkout.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10003
Summary: Ref T2787. Makes charges a real object, allows providers to apply them. We are now (just barely) capable of stealing users' money.
Test Plan: {F179584}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10002
Summary:
Ref T2787. Make carts and purchases real objects, with storage, that kind-of work.
Roughly, the idea here is that applications create "purchases" (like "1 large t-shirt") and add them to "carts" (a user can have a lot of different carts at the same time), then hand things off to Phortune to deal with actualy charging a card. Roughly this works like Paypal or other similar systems do, except Phortune is the thing the user gets handed off to.
This doesn't do anything interesting/useful yet.
Also fix some bugs and update some UI.
Test Plan: Added a product to a cart, saw it in cart screen.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10001
Summary: The old class name isn't quite correct.
I'm just updating the migration rather than adding a new one to fix it since
this was very recently introduced and affects only installs using Asana auth,
so it's realistic that the number of affected installs might be 0.
Affected installs can use `--apply` to safely rerun the migration.
Auditors: joshuaspence
Summary: Add a missing migration which should have been included in D9982. Harbormaster and Herald PHIDs are used as actors in some transactions.
Test Plan: Ran `./bin/storage upgrade`. Saw a transaction render correctly as "Herald assigned this task to alincoln" instead of "Unknown Object (Application) assigned this task to alincoln".
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10028
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: This migration script is required for D9999, which has already landed.
Test Plan: Ran `./bin/storage upgrade` and can log in again.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10010
Summary:
Fixes T5614. Ref T4420. Other than the "users" datasource and a couple of others, many datasources ignore what the user typed and just return all results, then rely on the client to filter them.
This works fine for rarely used ("legalpad documents") or always small ("task priorities", "applications") datasets, but is something we should graudally move away from as datasets get larger.
Add a token table to projects, populate it, and use it to drive the datasource query. Additionally, expose it on the applicationsearch UI.
Test Plan:
- Ran migration.
- Manually checked the table.
- Searched for projects by name from ApplicationSearch.
- Searched for projects by name from typeahead.
- Manually checked the typeahead response.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5614, T4420
Differential Revision: https://secure.phabricator.com/D9896
Summary: Ref T5245. This moves the actual storage over and stops reads and writes to the old table.
Test Plan:
- Verified tasks retained projects across the migration.
- Added and removed projects from tasks.
- Searched for: all, any, users' projects, not-in-projects, no-projects.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9850
Summary: Fixes T5611. We don't need sequences to be unique, and it makes it a pain to update them.
Test Plan: Dragged some columns around.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5611
Differential Revision: https://secure.phabricator.com/D9914
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary:
Fixes T5532. Allow documents to have a preamble in the header which can be used to explain who should sign a document and why.
Particularly, I plan to use this to navigate the corporate vs individual stuff more sensibly.
Test Plan: {F174228}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9819
Summary: Ref T1049. This provides a user-configurable name field on build steps, which allows users to uniquely identify their steps. The intention is that this field will be used in D9806 to better identify the dependencies (rather than showing an unhelpful PHID).
Test Plan: Set the name of some build steps, saw it appear in the correct places.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D9816
Summary:
Ref T5532. This adds:
- Documents can designate that they should be signed by "Corporations" or "Individuals".
- Corporate documents get different fields and a different exemption process.
- Basically everything works the same but this is like a zillion lines of form code.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9812
Summary:
Ref T5532. Allow document managers to add exemptions, which act like signatures but are tracked a little differently.
The primary use case for us is users who sign a corporate CLA and need a user-level exemption if they don't want to sign an individual CLA.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5532
Differential Revision: https://secure.phabricator.com/D9795
Summary: Ref T5471. Adds an archived state for panels. Archived panels don't show up in the default query view or in the "Add Existing Panel" workflow.
Test Plan:
- Archived a panel.
- Activated a panel.
- Viewed / searched for archived/active panels.
- Popped "Add Existing Panel" dropdown and saw it omit archived panels.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5471
Differential Revision: https://secure.phabricator.com/D9779
Summary:
Ref T3116. In the case of anonymous signers, there's no way to do a quick way to check if someone has signed a doc since you can't query by their (nonexistent) external account ID.
Move "name" and "email" to first-class columns and let the engine search for them.
Test Plan: Searched for signatures with name and email fragments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D9776
Summary: This further helps differentiate types/roles for projects.
Test Plan: {F169758}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9710
Summary: Ref T2222. See D8355. I'll hold this for a while.
Test Plan: Ran migration.
Reviewers: chad, btrahan
Reviewed By: chad
Subscribers: epriestley, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8356
Summary: Ref T2222. I'll hold this, but there are no more reads or writes from/to this table in the application.
Test Plan: Grepped for usage, ran migration, browsed around.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8203
Summary:
Ref T4209. Unifies the local (`./bin/phd status`) and global (`./bin/phd status --all`) view into a single table. This generally makes it easy to administer daemons running across multiple hosts.
Depends on D9606.
Test Plan:
```
> sudo ./bin/phd status
ID Host PID Started Daemon Arguments
38 localhost 2282 Jun 18 2014, 7:52:56 AM PhabricatorRepositoryPullLocalDaemon
39 localhost 2289 Jun 18 2014, 7:52:57 AM PhabricatorGarbageCollectorDaemon
40 localhost 2294 Jun 18 2014, 7:52:57 AM PhabricatorTaskmasterDaemon
41 localhost 2314 Jun 18 2014, 7:52:58 AM PhabricatorTaskmasterDaemon
42 localhost 2319 Jun 18 2014, 7:52:59 AM PhabricatorTaskmasterDaemon
43 localhost 2328 Jun 18 2014, 7:53:00 AM PhabricatorTaskmasterDaemon
44 localhost 2354 Jun 18 2014, 7:53:08 AM PhabricatorRepositoryPullLocalDaemon X --not Y
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9607
Summary:
We already have GC for daemon log events, but not for daemon logs themselves.
Collect old daemon logs which aren't still running.
Test Plan: Ran `phd debug garbage`, observed old logs get cleaned up. Started some daemons, re-ran garbage, made sure they stuck around.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9610
Summary:
Ref T4566. Currently, mocks have a conservative (author only), immutable default edit policy.
Instead:
- Let the edit policy be changed.
- Default the edit policy to "all users", similar to other applications.
- Add an application-level setting for it.
- Migrate existing edit policies to be consistent with the old policy (just the author).
This stops short of adding a separate "owner" and letting that be changed, since Pholio doesn't really have any review/approve type features (at least, so far). We can look at doing this if we get more feedback about it, or if we make owners more meaningful (e.g., add more "review-like" process to mocks).
Test Plan:
- Ran migration scripts.
- Confirmed existing mocks retained their effective policies (author only).
- Created a new mock, saw edit policy.
- Changed edit policy.
- Changed global edit policy default.
- Tried to edit a mock I couldn't edit.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4566
Differential Revision: https://secure.phabricator.com/D9550
Summary:
Ref T4045. Ref T5179. Hunk storage has two major issues:
- It's utf8, but actual diffs are binary.
- It's huge and can't be compressed or archived.
This introduces a second datastore which solves these problems: by recording hunk encoding, supporting compression, and supporting alternate storage. There's no actual compression or storage support yet, but there's space in the table for them.
Since nothing actually uses hunk IDs, it's fine to have these tables exist at the same time and use the same IDs. We can migrate data between the tables gradually without requiring downtime or disrupting installs.
Test Plan:
- There are no writes to the new table yet.
- The only effect this has is making us issue one extra query when looking for hunks.
- Observed the query issue, but everything else continue working fine.
- Created a new diff.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045, T5179
Differential Revision: https://secure.phabricator.com/D9290
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary: Fixes T5090. Introduced getIcon into Handle stack which allows you to specify a per handle icon. getIcon falls back ot getTypeIcon.
Test Plan: changed the icon on a project a bunch. verified transactions showed up. verified icon showed up in typeahead. verified icon showed up in tokens that were pre-generated (not typed in). units test passed.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5090
Differential Revision: https://secure.phabricator.com/D9264
Summary:
Fixes T4021. Chooses to keep a "primary" slug based off the name - including all that lovely logic - and allow the user to specify "additional" slugs. Expose these as "hashtags" to the user.
Sets us up for a fun diff where we can delete all the Project => Phriction automagicalness. In terms of this diff, see the TODOs i added.
Test Plan:
added a primary slug as an additional slug - got an error. added a slug in use on another project - got an error. added multiple good slugs and they worked. removed slugs and it worked. made some remark using multiple new slugs and they all linked to the correct project
ran epriestley's case
- Create project "A".
- Give it additional slug "B".
- Try to create project "B".
and i got a nice error about hashtag collision
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4021
Differential Revision: https://secure.phabricator.com/D9250
Summary:
Ref T4398. We have several auth-related systems which require (or are improved by) the ability to hand out one-time codes which expire after a short period of time.
In particular, these are:
- SMS multi-factor: we need to be able to hand out one-time codes for this in order to prove the user has the phone.
- Password reset emails: we use a time-based rotating token right now, but we could improve this with a one-time token, so once you reset your password the link is dead.
- TOTP auth: we don't need to verify/invalidate keys, but can improve security by doing so.
This adds a generic one-time code storage table, and strengthens the TOTP enrollment process by using it. Specifically, you can no longer edit the enrollment form (the one with a QR code) to force your own key as the TOTP key: only keys Phabricator generated are accepted. This has no practical security impact, but generally helps raise the barrier potential attackers face.
Followup changes will use this for reset emails, then implement SMS multi-factor.
Test Plan:
- Enrolled in TOTP multi-factor auth.
- Submitted an error in the form, saw the same key presented.
- Edited the form with web tools to provide a different key, saw it reject and the server generate an alternate.
- Change the expiration to 5 seconds instead of 1 hour, submitted the form over and over again, saw it cycle the key after 5 seconds.
- Looked at the database and saw the tokens I expected.
- Ran the GC and saw all the 5-second expiry tokens get cleaned up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9217
Summary:
See title. Adds PhabricatorDashboardInstall data object which scopes installs to objectPHID + applicationClass. This is because we already have a collision for user home pages and user profiles. Assume only one dashboard per objectPHID + applicationClass though at the database level.
Fixes T5076.
Test Plan: From dashboard view, installed a dashboard - success! Went back to dashboard view and uninstalled it!
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5076
Differential Revision: https://secure.phabricator.com/D9206
Summary: Fixes T4299, Add status dropdown to mock edit view
Test Plan: Edit mock, close mock, thumbnail title should read (Disabled). Default mocks list should show only open mocks.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4299
Differential Revision: https://secure.phabricator.com/D9145
Summary:
Fixes T4898. After we increased the strictness of the `%s` conversion, most `serialize()` output is rejected from the cache.
Drop the cache, change the column type to latin1_bin, and then use `%B` to mark the data as binary during query construction.
Test Plan: Viewed Differential, saw cache fills.
Reviewers: btrahan, spicyj
Reviewed By: spicyj
Subscribers: epriestley
Maniphest Tasks: T4898
Differential Revision: https://secure.phabricator.com/D9171
Summary:
Ref T4994. This stuff works:
- You can dump a blob of coverage information into `diffusion.updatecoverage`. This wipes existing coverage information and replaces it.
- It shows up when viewing files.
- It shows up when viewing commits.
This stuff does not work:
- When viewing files, the Javascript hover interaction isn't tied in yet.
- We always show this information, even if you're behind the commit where it was generated.
- You can't do incremental updates.
- There's no aggregation at the file (this file has 90% coverage), diff (the changes in this commit are 90% covered), or directory (the code in this directory has 90% coverage) levels yet.
- This is probably not the final form of the UI, storage, or API, so you should expect occasional changes over time. I've marked the method as "Unstable" for now.
Test Plan:
- Ran `save_lint.php` to check for collateral damage; it worked fine.
- Ran `save_lint.php` on a new branch to check creation.
- Published some fake coverage information.
- Viewed an affected commit.
- Viewed an affected file.
{F151915}
{F151916}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley, zeeg
Maniphest Tasks: T5044, T4994
Differential Revision: https://secure.phabricator.com/D9022
Summary: This is useful when you're trying to onboard an entire office and you end up using the Google OAuth anyway.
Test Plan: tested locally. Maybe I should write some tests?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9150
Summary:
This gets us the ability to specify a "layout mode" and which column a panel should appear in at panel add time. Changing the layout mode from a multi column view to a single column view or vice versa will reset all panels to the left most column.
You can also drag and drop where columns appear via the "arrange" mode.
We also have a new dashboard create flow. Create dashboard -> arrange mode. (As opposed to view mode.) This could all possibly use massaging.
Fixes T4996.
Test Plan:
made a dashboard with panels in multiple columns. verified correct widths for various layout modes
re-arranged collumns like whoa.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4996
Differential Revision: https://secure.phabricator.com/D9031
Summary:
Create transaction, editor, etc, and move command generation over to editor.
Show in a timeline in the buildable page.
Also prevent Engine from creating an empty transaction when build starts (Fixes T4885).
Fixes T4886.
Test Plan: Restart builds and buildables, look at timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4885, T4886
Differential Revision: https://secure.phabricator.com/D9110
Summary:
Ref T4455. This adds a `repository_parents` table which stores `<childCommitID, parentCommitID>` relationships.
For new commits, it is populated when commits are discovered.
For older commits, there's a `bin/repository parents` script to rebuild the data.
Right now, there's no UI suggestion that you should run the script. I haven't come up with a super clean way to do this, and this table will only improve performance for now, so it's not important that we get everyone to run the script right away. I'm just leaving it for the moment, and we can figure out how to tell admins to run it later.
The ultimate goal is to solve T2683, but solving T4455 gets us some stuff anyway (for example, we can serve `diffusion.commitparentsquery` faster out of this cache).
Test Plan:
- Used `bin/repository discover` to discover new commits in Git, SVN and Mercurial repositories.
- Used `bin/repository parents` to rebuild Git and Mercurial repositories (SVN repos just exit with a message).
- Verified that the table appears to be sensible.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: jhurwitz, epriestley
Maniphest Tasks: T4455
Differential Revision: https://secure.phabricator.com/D9044
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary: Fixes T4931. Each new credential should come with the ability to lock the credential permanently, so that no one can ever edit again. Each existing credential must allow user to lock existing credential.
Test Plan: Create new credential, verify that you can lock it before saving it. Open existing unlocked credential, verify that option to lock it exists. Once credential is locked, the option to reveal it should be disabled, and editing the credential won't allow username/password updates.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4931
Differential Revision: https://secure.phabricator.com/D8947
Summary:
Ref T4749. Ref T3265. Ref T4909. Several goals here:
- Move user destruction to the CLI to limit the power of rogue admins.
- Start consolidating all "destroy named object" scripts into a single UI, to make it easier to know how to destroy things.
- Structure object destruction so we can do a better and more automatic job of cleaning up transactions, edges, search indexes, etc.
- Log when we destroy objects so there's a record if data goes missing.
Test Plan: Used `bin/remove destroy` to destroy several users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3265, T4749, T4909
Differential Revision: https://secure.phabricator.com/D8940
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary:
Ref T3583. Adds edges, query relationships, etc. Lots of debugging/temporary UI.
My general intent here is to use edges to track where panels appear, and then put additional data on the dashboard itself to control layout, positioning, etc.
Dashboards don't actually render yet so this is still pretty boring.
Test Plan:
{F149175}
{F149176}
{F149177}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8916
Summary: Ref T3583. These will be the primary class carrying panel implementations.
Test Plan:
{F149125}
{F149126}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8912
