Summary:
Ref T13130. See PHI617.
The new build log UI has tags like `<a href="...">Show More Above <span icon>^</span></a>`. If you click the little "^" icon, the event target is the `<span />` instead of the `<a />` so we expand on the wrong node.
Instead, select the `<a />` by sigil explicitly.
Test Plan: Viewed new log UI in Harbormaster, clicked "^" icon and text, got the same (correct) behavior on both.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19410
Summary:
See <https://twitter.com/HayleyCAnderson/status/988873585363009536>.
Currently, the action dropdown in Differential shows a heavy "X" after "Request Changes" and a heavy checkmark after "Accept Revision".
Although I'm not convinced that the messaging around "Request Changes" is too strong, I do think these marks are out of place in modern Differential. They came from a simpler time when this dropdown had fewer actions, but feel a little weird and inconsistent to me in the modern UI.
Let's try getting rid of them and see how it goes?
Test Plan:
- Viewed these actions in the dropdown, no longer saw the mark icons.
- Grepped for these unicode sequences without getting any other hits.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19405
Summary:
Depends on D19400. Ref T13130. Currently, when you write Herald rules about other Herald rules, you can't pick a rule type or content type, so there's no way to get notified about edits to just global rules (which is the primary driving use case).
Add a "Content type" field to let the rule match rules that affect revisions, tasks, commits, etc.
Add a "Rule type" field to let the rule match global, personal, or object rules.
Test Plan:
- Wrote a global rule for other rules about global Herald rules:
{F5540307}
{F5540308}
- Ran it against itself which matched:
{F5540309}
- Ran it against another rule (not a global rule about Herald rules), which did not match:
{F5540311}
- Also reviewed the fields in those transcripts in more detail to make sure they were extracting matching correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19403
Summary: This word isn't the right word.
Test Plan: Reading?
Reviewers: avivey, amckinley
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D19404
Summary:
Depends on D19399. Ref T13130. This adds basic support for writing Herald rules against Herald rules. See T13130 for a lot more detail.
This needs a bit more work to be useful: for example, there's no way to specify the rule type or subject, so you can't say "notify me when global rules are edited" or "notify me when Maniphest rules are edited". I'll add some fields for that in followup changes to actually solve the original use case.
Test Plan:
- Wrote Herald rules against Herald rules.
- Ran them by editing rules and in the test console.
- Verified they sent some mail with `bin/mail list-outbound`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19400
Summary:
Ref T13065. `mailKey`s are a private secret for each object. In some mail configurations, they help us ensure that inbound mail is authentic: when we send you mail, the "Reply-To" is "T123+456+abcdef".
- The `T123` is the object you're actually replying to.
- The `456` is your user ID.
- The `abcdef` is a hash of your user account with the `mailKey`.
Knowing this hash effectively proves that Phabricator has sent you mail about the object before, i.e. that you legitimately control the account you're sending from. Without this, anyone could send mail to any object "From" someone else, and have comments post under their username.
To generate this hash, we need a stable secret per object. (We can't use properties like the PHID because the secret has to be legitimately secret.)
Today, we store these in `mailKey` properties on the actual objects, and manually generate them. This results in tons and tons and tons of copies of this same ~10 lines of code.
Instead, just store them in the Mail application and generate them on demand. This change also anticipates possibly adding flags like "must encrypt" and "original subject", which are other "durable metadata about mail transmission" properties we may have use cases for eventually.
Test Plan:
- See next change for additional testing and context.
- Sent mail about Herald rules (next change); saw mail keys generate cleanly.
- Destroyed a Herald rule with a mail key, saw the mail properties get nuked.
- Grepped for `getMailKey()` and converted all callsites I could which aren't the copy/pasted boilerplate present in 50 places.
- Used `bin/mail receive-test --to T123` to test normal mail receipt of older-style objects and make sure that wasn't broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D19399
Summary:
Ref T13130. See PHI483. Currently, "Plan Changes + Draft" uses rules like "Plan Changes", not rules like "Draft", and allows "Accept".
This isn't consistent with how "Draft" and "Accept" work in other cases. Make "Plan Changes + Draft" more like "Draft" for consistency.
Also fix a string that didn't have a natural English version.
Test Plan:
- Added a failing build plan.
- Created a revision.
- Loaded the revision before builds completed, saw a nicer piece of text about "waiting for builds" instead of "waiting for 2 build(s)".
- Builds failed, which automatically demoted the reivsion to "Changes Planned + Draft".
- As the author and as a reviewer, verified all the actions available to me made sense (particularly, no "Accept").
- Abandoned the revision to test "Abandoned + Draft".
- As the author and as a reviewer, verified all the actions available to me made sense.
- Reclaimed the revision, then used "Request Review" to send it to "Needs Review". Verified that actions made sense and, e.g., reviewers could now "Accept" normally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19398
Summary:
Ref T4200. Since the last time this script was written, Ubuntu has made lots of changes.
Try to keep up with those.
Test Plan:
Ran this on frash installs of Ubuntu 16.04 LTS and 18.04 LTS (Pre-release).
Got to see Phabricator running.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: amckinley, Korvin
Maniphest Tasks: T4200
Differential Revision: https://secure.phabricator.com/D19394
Summary:
See D19394. Currently, during first-time setup before you configure "phabricator.base-uri", we may attempt to generate a setup page, try to generate a CSP header for it, and fail to access the environmental config. This causes a too-severe error page ("configure phabricator.base-uri") instead of preflight guidance (like "can't connect to MySQL").
Instead, treat this more like "security.alternate-file-domain" and just bail on CSP if we can't fetch it.
Test Plan: On a fresh (non-explodey laptop) install with critical setup errors (no MySQL installed yet), loaded Phabricator. Before: error about phabricator.base-uri. After: more helpful guidance about installing/configuring MySQL.
Reviewers: amckinley, avivey
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19396
Summary: Ref T13126. After SourceView changes, embedded pastes with the `{Pxxx}` syntax are line-wrapping line numbers in Safari, at least. Put a stop to this.
Test Plan: Viewed a `{Pxxx}` with more than 10 lines. Before: weird line wrapping; after: nice consistent display.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19393
Summary: Depends on D19391. Ref T13126. See that task for some details on what's going on here.
Test Plan:
- Viewed a file which includes lines that were added during the first commit to the repository.
- Before D19391: fatal.
- After D19391: blank.
- After this patch: accurate blame information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19392
Summary:
Ref T13126. When you view a file using the new document engine view and some lines were introduced in the initial commit to the repository, Git renders "^abc123" in the blame output.
We currently don't do anything about this, and later fail to look it up and fatal.
It's also unlikely-but-conceivably-possible to end up here if a commit has not imported yet or has been nuked with `bin/remove destroy`.
Let the whole thing run without fataling even if a `$commit` is missing. Future refinements could improve this behavior.
Test Plan: Viewed a file with lines introduced in the initial commit, got empty blame instead of a fatal.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19391
Summary:
Ref T13124. See PHI584. When you create a draft revision and it automatically demotes to "Changes Planned + Draft" because builds fail, let it promote to "Needs Review" automatically if builds pass. Usually, this will be because someone restarted the builds and they worked the second time.
Although I'm a little wary about adding even more state transitions to the diagram in T13110#237736, I think this one is reasonably natural and not ambiguous.
Test Plan:
- Created a failing build plan with a "Throw Exception" step.
- Created a revision which hit the build plan, saw it demote to "Changes Planned" when Harbormaster failed.
- Edited the build plan to remove the "Throw Exception" step, restarted the build, got a pass.
- Saw revision promote again:
{F5526104}
I didn't exhaustively test that the other 40 state transitions still work properly, but I think the scope of this change is small enough that it's unlikely I did much collateral damage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19380
Summary: See discussion in D19379. The 4-tuple of (device, network, address, port) should be unique.
Test Plan: Created lots of duplicate interfaces, bound those interfaces to various services, observed migration script clean things up correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19388
Summary:
Ref T13124. See PHI593.
When you `arc diff` in a Git or Mercurial repository, we upload some information about the local commits in your working copy which the change was generated from.
In the future (for example, with T1508) we may increase the prominence of this feature.
Provide a stable way to read this information back via the API. This roughly mirrors the information we provide about commits in "diffusion.commit.search", although the latter is less fleshed-out today.
Test Plan: Used `differential.diff.search` to retrieve commit information about Git, Mercurial, and Subversion diffs. (There's no info for Subversion, but it doesn't crash or anything.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19386
Summary:
Ref T13127. Users with red/green colorblindness may have difficulty using this element in its current incarnation.
We could give it different behavior if the "Accessibility" option is set for red/green colorblind users, but try a one-size-fits-all approach since the red/green aren't wholly clear anwyay.
Test Plan: {F5530050}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13127
Differential Revision: https://secure.phabricator.com/D19385
Summary:
Ref T13124. Ref T13131. Fixes T8953. See PHI512.
When you receieve a notification about an object and then someone hides that object from you (or deletes it), you get a phantom notification which is very difficult to clear.
For now, test that notifications are visible when you open the menu and clear any that are not.
This could be a little more elegant than it is, but the current behavior is very clearly broken. This unbreaks it, at least.
Test Plan:
- As Alice, configured task stuff to notify me (instead of sending email).
- As Bailey, added Alice as a subscriber to a task, then commented on it.
- As Alice, loaded home and saw a notification count. Didn't click it yet.
- As Bailey, set the task to private.
- As Alice, clicked the notification bell menu icon.
- Before change: no unread notifications, bell menu is semi-stuck in a phantom state which you can't clear.
- After change: bad notifications automatically cleared.
{F5530005}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13131, T13124, T8953
Differential Revision: https://secure.phabricator.com/D19384
Summary: Fixes T13129. This at least makes the existing UI work again before we banish Phlux to the shadow realm.
Test Plan: Edited the visibility for a Phlux variable, didn't get an error. Nothing showed up in the edge tables when I made those changes, but at least it doesn't error out anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13129
Differential Revision: https://secure.phabricator.com/D19387
Summary:
The name of networks should be unique.
Also adds support for exact-name queries for AlamanacNetworks.
Test Plan: Applied migration with existing duplicates, saw networks renamed, attempted to add duplicates, got a nice error message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19379
Summary:
Ref T13124. See PHI531. When a revision is updated, builds against the older diff tend to stop being relevant. Add an option to abort outstanding older builds automatically.
At least for now, I'm adding this as a build step instead of some kind of special checkbox. An alternate implementation would be some kind of "Edit Options" action on plans with a checkbox like `[X] When this build starts, abort older builds.`
I think adding it as a build step is a bit simpler, and likely to lead to greater consistency and flexibility down the road, make it easier to add options, etc., and since we don't really have any other current use cases for "a bunch of checkboxes". This might change eventually if we add a bunch of checkboxes for some other reason.
The actual step activates //before// the build queues, so it doesn't need to wait in queue before it can actually act. T13088 discusses some plans here if this sticks.
Test Plan:
- Created a "Sleep for 120 seconds" build plan and triggered it with Herald.
- Added an "Abort Older Builds" step.
- Updated a revision several times in a row, saw older builds abort.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19376
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary: Ref T13105. After moving Diffusion to DocumnentEngine, this no longer has callers. It will become part of the document behavior.
Test Plan: Grepped for calls to the `diffusion-browse-file` behavior, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19377
Summary:
Depends on D19372. Ref T13124. See PHI505. Currently, if you `!history` a task with a lot of comments, you get output like this:
> alice added a comment.
> bailey added a comment.
> alice added a comment.
> alice added a comment.
>
> AAAA
>
> BBBB
>
> AAAA
>
> AAAA
This is impossible to read. Put the "alice added a comment." headers above the actual comments for comments after the first.
These types of mail messages are unusual, but occur in several cases:
- The new `!history` command.
- Multiple comments on a draft revision before it promotes out of draft.
- (Probably?) Conduit API updates which submit multiple comment transactions for some reason.
Test Plan: Used `bin/mail receive-test` to send a `!history` command to a task, saw a much more readable rendering of the transaction log in the resulting email.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19373
Summary:
See PHI505. Ref T13124. If you're an agent of a hostile state trying to exfiltrate corporate secrets, you might find yourself foiled if Phabricator is secured behind a VPN.
To assist users in this situation, provide a "!history" command which will dump the entire history of an object in a nice text format and get through the troublesome VPN.
Some issues with this:
- You currently get all the "X added a comment." up top, and then all the comments below. This isn't terribly useful.
- This goes through the "Must Encrypt" flag, but possibly should not? (On the other hand, this is a pretty willful way to bypass it the flag.)
Test Plan: Used `bin/mail receive-test ...` to send `!history` commands, got somewhat-useful response mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19372
Summary:
Depends on D19370. See T13124. See PHI549. The particular install in PHI549 migrated a large amount of data via the fallback hunk migration script, which does not compress hunks.
Add a mode to `bin/differential migrate-hunk` that amounts to "compress all the hunks which would benefit from compression".
Test Plan: Ran `bin/differential migrate-hunk` with `--auto`, `--all`, `--to`, `--id`, and `--dry-run` in various mixtures. Forced a bunch of hunks to raw ("byte") format, saw it cleanly upgrade them to compressed ("gzde") format.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19371
Summary:
Depends on D19369. Ref T13120. Add a flag to migrate every hunk.
This isn't terribly useful on its own, but I'm going to add an `--auto` flag next so that you can run `--auto --all` to migrate hunks to the preferred hunk format.
Test Plan: Ran `bin/differential migrate-hunk --all --to text`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19370
Summary: This is a good spelling, but maybe a better spelling is possible.
Test Plan: hmmm
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19369
Summary: Ref T13076. This will be used by the metric collection system to iterate over the cluster devices.
Test Plan: Created some cluster and non-cluster devices, searched and saw expected results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13076
Differential Revision: https://secure.phabricator.com/D19368
Summary:
Ref T13120. See PHI571. Fixes T5024. This adds a "View as Query" action to workboard columns, which builds a query in Maniphest that has the current query constraints plus an additional constraint to select only tasks in the specified column.
This is a normal query and can be turned into a dashboard panel, added to a menu, edited, saved as a link, etc.
Much of the complexity here is that finding tasks in a given column isn't entirely straightforward because of how board layout works: when you create a task, it isn't immediately placed in columns. It's only actually added to the "Backlog" column on any boards when someone looks at the board.
To get the right behavior, we must do "board layout" for any queried columns before we can constrain results. This isn't enormously efficient, but should be OK for reasonable boards.
Test Plan:
- Used "View as Query" for normal columns and milestome columns, got appropriate queries in Maniphest.
- Applied filters to the board (e.g., "Priorities: wishlist"), then used "View As Query" and had my custom filters respected.
- Queried some large boards/columns with more than a thousand tasks, got results back within a second or so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T5024
Differential Revision: https://secure.phabricator.com/D19366
Summary:
See PHI565. Ref T13120. Although this older log is on the chopping block (see T13088), there's some migration guidance and other complexity around just replacing it.
Until it gets replaced, make clicking the "number of lines" elements respect the current "Build Generation" setting. Prior to this change, clicking the links would lose the generation information and jump you to the most recent build generation.
Also fix some collateral damage from T13105 where we ended up with white text on a white background in some cases.
Test Plan:
- Restarted a build to get multiple generations.
- On each generation, clicked the various "25", "50", etc., links.
- Saw generation and log window sizes both respected by the links.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19367
Summary:
Depends on D19356. Fixes T10883. Ref T13120.
- Add a "writable" property to the bindings, defaulting to "true" with a nice dropdown.
- When selecting hosts, allow callers to request a writable host.
- If the caller wants a writable host, only return hosts if they're writable.
- In SVN and Mercurial, we sometimes return only writable hosts when we //could// return read-only hosts, but figuring out if these request are read-only or read-write is currently tricky. Since these repositories can't really cluster yet, this shouldn't matter too much today.
Test Plan:
- Without any config changes, viewed repositories via web UI and pushed/pulled via SSH and HTTP.
- Made all nodes in the cluster read-only by disabling "writable", pulled and hit the web UI (worked), tried to push via SSH and HTTP (got errors about read-only).
- Put everything back, pulled and pushed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19357
Summary:
Depends on D19355. Ref T10883. Ref T13120. Rather than adding a million parameters here, wrap the selector-parameters in an `$options`.
The next change adds a new "writable" option to support forcing selection of writable hosts.
Test Plan: Pulled and pushed via HTTP and SSH, viewed repositories via Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19356
Summary:
Ref T10883. Ref T13120. There's an existing "closed" property on repository services that stops new repositories from being allocated there.
Turn it into a nice boolean.
Test Plan: Toggled the value on/off using a nice `<select />` with helpful labels instead of a text area.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19355
Summary:
See PHI573. Ref T13120. Drafts were recently changed so that "draft" and "broadcast" are separate flags, and you can have non-broadcasting revisions in states other than "draft" if builds fail on a draft or you abandon a draft.
However, when draft mode is entered with `arc diff --draft` and you have prototypes off, this flag wasn't being set correctly.
Test Plan: Disabled prototypes, created a revision with `arc diff --draft`, observed that `draft.broadcast` is now correctly `false`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19360
Summary:
See PHI574. Ref T13120. When you `Ref Txx` or `Fixes Txxx`, we mark it "unmentionable" to prevent the task from generating both a reference and a mention.
If you add a reference to an object (like a commit hash) to a custom remarkup field, there's currently no real way to prevent it from generating a mention, except that you can explicitly mark the PHID as unmentionable on the Editor.
This isn't exactly a first-class feature, but we technically do it in `PhabricatorRepositoryCommitMessageParserWorker`, and it probably doesn't hurt or interfere with anything to support it slightly better.
In Differential, respect any existing value and append new values to it rather than overwriting the value.
Test Plan: Edited a revision summary to include `Ref Txxx`, saw only a reference (not a mention) generate.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19361
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19348. Ref T13105. When copying text from Paste or Diffusion, we'd like to copy only source, not line numbers.
We currently accomplish this with zero-width spaces plus a trigger that fires on "copy" in Paste and Diffusion. This is quite gross.
In the new-style Harbormaster logs, we use an approach that seems slightly better: CSS psuedoelements.
This isn't a complete solution (see also PHI504 / T5032) but puts us in a slightly better place.
Use it in Paste/Files/Diffusion too.
This gives us good behavior in all browsers in Files and Paste.
This gives us good behavior in Chrome and Firefox in Diffusion. Safari will copy (but not visually select) blame information in Diffusion. I think we can live with that for now.
Test Plan: Selected and copy/pasted stuff in Diffusion, Files, and Paste. Got good behavior everywhere except Safari + Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19349
Summary:
Depends on D19347. Ref T13105. See PHI565. The "highlight lines" behavior is interacting poorly with the new blame element in Diffusion.
Make the behavior a little simpler and hopefully more robust.
Test Plan:
- Clicked commit/revision links in Diffusion, saw the links get followed instead of the lines highlighted.
- Highlighted lines in Diffusion, saw just the line/code highlight instead of the whole thing.
- Highlighted lines in Paste and new-style Harbormaster build logs, saw consistent behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19348
Summary: Depends on D19346. Ref PHI568. I love Javascript.
Test Plan:
- Viewed a revision.
- Dragged file tree view really wide.
- Scrolled document to the right.
- Toggled file tree off and on by pressing "f" twice.
- Before patch: file tree grew wider and wider after it was toggled.
- After patch: file tree stayed the same size after it was toggled.
- Dragged to various widths and reloaded to make sure the "sticky across reloads" behavior still works.
- Scrolled right, dragged the tree a bit, then reloaded and didn't see it flip out.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19347
Summary:
Ref T13105. Previously, the "source code" view in Paste rendered on a brown/orange-ish background. I've been using this element in more contexts (Files, Diffusion) and removed the colored background to make text (particularly syntax-highlighted text) easier to read and reduce visual noise with the new blame colors.
In Diffusion the view is in a box with a white background so removing the background left us with white, but in Paste it's just directly on the page so the background was bleeding through. Instead, set it to white explicitly.
Test Plan: Viewed source files in Files, Diffusion and Paste; saw text on a white background.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19346
Summary:
See PHI568. If you make the file tree UI very wide so that the page generates a horizontal scrollbar and then scroll the page, the page content can paint underneath the menu.
The menu already has a z-index to make it render above the content, but doesn't actually have a background. Give it a background.
The "transparent" rule was added in D16346 but I don't see any reason why we actually need it there, so I think this probably won't break anything.
Test Plan: {F5518822}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19344
Summary:
Depends on D19342. Ref T12414. Ref T13120. This adds an EditEngine extension for editing Almanac properties.
The actual wire format is a little weird. Normally, we'd have a transaction for each property, but since you can pick any property names you want we can't really do that (we'd have to generate infinite transactions).
The transaction wire format anticipates that transactions may eventually get some kind of metadata -- each transaction looks like this:
```
{
"type": "title",
"value": "Example title"
}
```
...and we can add more keys there. For example, I could have made this transaction look like this:
```
{
"type": "property.set",
"almanac.property.key": "some-key",
"value": "some-value"
}
```
However, I don't want to just accept any possible key freely, and it might be a decent chunk of work to formalize this better. It also doesn't feel great.
I just built special transaction types intead, so you:
```
{
"type": "property.set",
"value": {
"some-key": "some-value",
...
}
}
```
Internally, we may generate more than one transaction as a result (if the "value" has more than one key).
This feels a bit more natural and is probably easier for clients to use anyway.
Test Plan: Set and deleted Service, Device and Binding properties via the API.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19343
Summary:
Depends on D19341. Ref T12414. Ref T13120.
- Fix a bug where default-valued properties didn't get rendered in grey as they're supposed to (as a hint that the value isn't customized).
- When resetting a builtin property won't do anything, visually disable the button as a hint.
- Allow Services to specify properties on their Bindings.
- Specify that repository bindings have a "protocol" property, so it becomes an explicit thing in the UI. Previously, you had to read the documentation to figure this out.
- When editing bindings, use the EditField and its configuration if possible. This turns the "Protocol" property into a dropdown in the UI where you select between "http", "https" and "ssh".
- Give the "protocol" binding a smart default based on the port number of the corresponding interface.
Test Plan:
- Viewed properties on Services, Devices and Bindings.
- Saw them render sensibly, and grey out + grey button when a builtin value has a default setting.
- Saw "Protocol" appear as a default property on repository cluster bindings and get a smart value.
- Edited "protocol", got a nice dropdown.
{F5518791}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19342
Summary:
Depends on D19340. Ref T12414. Ref T13120. See T12414 for some discussion about direction here.
Since I think retaining "enabled/disabled" as a simple flag is reasonable, expose it via the API for readers and writers.
Also expose binding properties.
Test Plan:
- Searched for bindings and properties with "alamanc.binding.search".
- Enabled and disabled bindings with "almanac.binding.edit".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19341
Summary:
Depends on D19338. Ref T13120. Ref T12414. These are the last of the new API methods.
This stuff still doesn't work:
- You can't actually enable/disable bindings yet. I want to take a look at the use cases and consider changing "disabled" to "status", or providing a different way to solve the problem.
- You can't edit properties via the API. I expect to enable this for all `AlmanacPropertyInterface` objects with an extension in a future change.
Test Plan:
- Searched for bindings via API.
- Viewed binding web UI for API methods.
- Created bindings via API.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19340
Summary: Depends on D19337. Ref T13120. Ref T12414. These are slightly more substantive than namespace/network, but pretty much standard fare.
Test Plan:
- Searched for interfaces with "almanac.interface.search".
- Created and edited interfaces with "almanac.interface.edit".
- Created and edited interfaces with web UI since some stuff got tweaked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19338
Summary: Depends on D19336. Ref T13120. Ref T12414. These are simple, straightforward, and uninteresting.
Test Plan:
- Searched for namespaces with "almanac.namespace.search".
- Created and edited namespaces with "almanac.namespace.edit".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19337
Summary: Depends on D19335. Ref T13120. Ref T12414. There are many good ways to spell "almanac", but stick with convention here.
Test Plan: (O_O)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19336
Summary: Depends on D19334. Ref T13120. Ref T12414. These are pretty straightforward, but no one really has a use case for them anyway today so they're primarily just for completeness.
Test Plan:
- Queried networks with `almanac.network.search`.
- Created and edited networks with `almanac.network.edit`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19335
