Summary: Ref T5474. When you view the main page for a rule, show what the rule does before you actually edit it.
Test Plan:
Viewed a real trigger, then faked invalid/unknown rules:
{F6300211}
{F6300212}
{F6300213}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20303
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary: Depends on D20287. Ref T5474. This hard-codes a storage value for every trigger, with a "Change status to <default closed status>" rule and two bogus rules. Rules may now apply transactions when cards are dropped.
Test Plan: Dragged cards to a column with a trigger, saw them close.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20288
Summary:
Depends on D20286. Ref T5474. Attaches triggers to columns and makes "Remove Trigger" work.
(There's no "pick an existing named trigger from a list" UI yet, but I plan to add that at some point.)
Test Plan: Attached and removed triggers, saw column UI update appropriately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20287
Summary: Depends on D20279. Ref T5474. Modernize these transactions before I add a new "TriggerTransaction" for setting triggers.
Test Plan: Created a column. Edited a column name and point limit. Hid and un-hid a column. Grepped for removed symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20286
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary:
When a TOS-like Legalpad document is marked "Require this document to use Phabricator", the login prompt shows a "Manage" button, but that button doesn't work.
When we're presenting a document as a session gate, don't show "Manage".
Test Plan: Viewed a required document during a session gate (no "Manage" button) and normally (saw "Manage" button).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20312
Summary:
See downstream <https://phabricator.wikimedia.org/T208254>.
I can't actually reproduce any issue here (we only show this field when creating a document, and only if the viewer is an administrator), so maybe this relied on some changes or was originally reported against older code.
Regardless, the validation isn't quite right: it requires administrator privileges to apply this transaction at all, but should only require administrator privileges to change the value.
Test Plan:
Edited Legalpad documents as an administrator and non-administrator before and after the change, with and without signatures being required.
Couldn't reproduce the original issue, but this version is generally more correct/robust.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20311
Summary: See downstream <https://phabricator.wikimedia.org/T182232>. We currently don't mark repository handles as closed.
Test Plan: Mentioned two repositories with `R1` (active) and `R2` (inactive). After patch, saw `R2` visually indicated as closed/inactive.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20309
Summary: See PHI1153. The "Runnable" and "Restartable" behaviors interact (to click "restart", you must be able to run the build AND it must be restartable). Make this more clear.
Test Plan: {F6301739}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20307
Summary: Ref T13266. This callsite is using the older API; swap it to use pagers.
Test Plan: Viewed a Phame blog post with siblings, saw the previous/next posts linked.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: nicolast
Maniphest Tasks: T13263, T13266
Differential Revision: https://secure.phabricator.com/D20319
Summary:
Ref T13263. Two minor issues:
- The "reconcile" dialog shows the wrong sign because JS signs differ from normal signs (for example, PST or PDT or whatever we're in right now is shown as "UTC+7", but should be "UTC-7").
- The big dropdown of possible timezones lumps "UTC+X:30" timezones into "UTC+X".
Test Plan:
- Reconciled "America/Nome", saw negative UTC offsets for "America/Nome" and "America/Los_Angeles" (previously: improperly positive).
- Viewed the big timzone list, saw ":30" and ":45" timezones grouped/labeled more accurately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20314
Summary:
See <https://discourse.phabricator-community.org/t/error-when-sending-a-message-chat-room/2548>.
Conpherence calls `setAfterID()` and `setBeforeID()` directly on a subquery, but these methods no longer exist.
Use a pager instead. This code probably shouldn't exist (we should use some other approach to fetch this data in most cases) but that's a larger change.
Test Plan: Sent messages in a Conpherence thread. Before: fatal; after: success. Viewed the Conphrence menu, loaded threads, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20318
Summary:
See downstream <https://phabricator.wikimedia.org/T210482>.
On mobile, the task graph can take up most of the screen. Hide it on devices. Keep it on the standalone view if you're really dedicated and willing to rotate your phone or whatever to see the lines.
Test Plan: Dragged window real narrow, saw graph hide.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20313
Summary:
See <https://discourse.phabricator-community.org/t/unhandled-exception-on-show-older-changes/2545/>.
Before T13266, this query got away without having real paging because it used simple ID paging only and results are never actually hidden (today, you can always see all transactions on an object).
Provide `withIDs()` so the new, slightly stricter paging works.
Test Plan: On an object with "Show Older" in the transaction record, clicked the link. Before: exception in paging code (see Discourse link above). After: transactions loaded cleanly.
Reviewers: amckinley, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D20317
After the cursor changes, we may fatal on pages with a large number of children
because "c.title" is not a selected column. We currently join the "content"
table if "updated" is part of the order vector, but not if "title" is part of
the order vector. This isn't right: "updated" is on the primary table, and only
"content" is on the joined table.
Summary:
Ref T13259. Currently, visiting a page that executes a query with an invalid cursor raises a bare exception that escapes to top level.
Catch this a little sooner and tailor the page a bit.
Test Plan: Visited `/maniphest/?after=335234234223`, saw a nicer exception page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20295
Summary:
Ref T13259. Currently, queries set a flag and return a partial result set when they overheat. This is mostly okay:
- It's very unusual for queries to overheat if they don't have a real viewer.
- Overheating is rare in general.
- In most cases where queries can overheat, the context is a SearchEngine UI, which handles this properly.
In T13259, we hit a case where a query with an omnipotent viewer can overheat: if you have more than 1,000 consecutive commits in the database with invalid `repositoryID` values, we'll overheat and bail out. This is pretty bad, since we don't process everything.
Change this beahvior:
- Throw by default, so this stuff doesn't slip through the cracks.
- Handle the SearchEngine case explicitly ("it's okay to overheat, we'll handle it").
- Make `QueryIterator` disable overheating behavior: if we're iterating over all objects, we want to hit the whole table even if most of it is garbage.
There are some cases where this might cause new exception behavior that we don't necessarily want. For example, in Owners, each package shows "recent commits in this package". If you can't see the first 1,000 recent commits, you'd previously get a slow page with no results. Now you'll probably get an exception.
If these crop up, I think the best approach for now is to deal with them on a case-by-case basis and see how far we get. In the "Owners" case, it might be good to query by repositories you can see first, then query by commits in the package in those repositories. That should give us a better outcome than any generic behavior we could implement.
Test Plan:
- Added 100000 to all repositoryID values for commits on my local install.
- Before making changes, ran `bin/repository rebuild-identities --all --trace`. Saw the script process 1,000 rows and exit silently.
- Applied the first part ("throw by default") and ran `bin/repository rebuild-identities`. Saw the script process 1,000 rows, then raise an exception.
- Applied the second part ("disable for queryiterator") and ran the script again. Saw the script process all 15,000 rows without issues (although none are valid and none actually load).
- Viewed Diffusion, saw appropriate NUX / "overheated" UIs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20294
Summary:
Depends on D20292. Ref T13259. This converts the rest of the `getPagingValueMap()` callsites to operate on internal cursors instead.
These are pretty one-off for the most part, so I'll annotate them inline.
Test Plan:
- Grouped tasks by project, sorted by title, paged through them, saw consistent outcomes.
- Queried edges with "edge.search", paged through them using the "after" cursor.
- Poked around the other stuff without catching any brokenness.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20293
Summary:
Depends on D20291. Ref T13259. Move all the simple cases (where paging depends only on the partial object and does not depend on keys) to a simple wrapper.
This leaves a smaller set of more complex cases where we care about external data or which keys were requested that I'll convert in followups.
Test Plan: Poked at things, but a lot of stuff is still broken until everything is converted.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20292
Summary:
See PHI1134. Previously, see T13082 and D19969 for some sort-of-related stuff.
Currently, edits work roughly like this:
- Suppose we're editing object X, and we're also going to edit some other object, Y, because X mentioned Y or the edit is making X a child or parent of Y, or unblocking Y.
- Do the actual edit to X, including inverse edits ("alice mentioned Y on X.", "alice added a child revision: X", etc) which apply to Y.
- Run Herald rules on X.
- Publish the edit to X.
The "inverse edits" currently do this whole process inline, in a sub-editor. So the flow expands like this:
- Begin editing X.
- Update properties on X.
- Begin inverse-edge editing Y.
- Update properties on Y.
- Run (actually, skip) Herald rules on Y.
- Publish edits to Y.
- Run Herald rules on X.
- Publish edits to X.
Notably, the "Y" stuff publishes before the "X" Herald rules run. This creates potential problems:
- Herald rules may change the name or visibility policy of "X", but we'll publish mail about it via the edits to Y before those edits apply. This is a problem only in theory, we don't ship any upstream rules like this today.
- Herald rules may "Require Secure Mail", but we won't know that at the time we're building mail about the indirect change to "Y". This is a problem in practice.
Instead, switch to this new flow, where we stop the sub-editors before they publish, then publish everything at the very end once all the edits are complete:
- Begin editing X.
- Update properties on X.
- Begin inverse-edge editing Y.
- Update properties on Y.
- Skip Herald on Y.
- Run Herald rules on X.
- Publish X.
- Publish all child-editors of X.
- Publish Y.
Test Plan:
- Created "Must Encrypt" Herald rules for Tasks and Revisions.
- Edited object "A", an object which the rules applied to directly, and set object "B" (a different object which the rules did not hit) as its parent/child and/or unblocked it.
- In `bin/mail list-outbound`, saw:
- Mail about object "A" all flagged as "Must Encrypt".
- Normal mail from object B not flagged "Must Encrypt".
- Mail from object B about changing relationships to object A flagged as "Must Encrypt".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20283
Summary:
Fixes T13265. See that task for discussion. Briefly:
- For mailers that use other mailers (SMTP, Sendmail), optionally let administrators set `"message-id": false` to improve threading behavior if their local Postfix is ultimately sending through SES or some other mailer which will replace the "Message-ID" header.
Also:
- Postmark is currently marked as supporting "Message-ID", but it does not actually support "Message-ID" on `secure.phabricator.com` (mail arrives with a non-Phabricator message ID). I suspect this was just an oversight in building or refactoring the adapter; correct it.
- Remove the "encoding" parameter from "sendmail". It think this was just missed in the cleanup a couple months ago; it is no longer used or documented.
Test Plan: Added and ran unit tests. (These feel like overkill, but this is super hard to test on real code.) See T13265 for evidence that this overall approach improves behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13265
Differential Revision: https://secure.phabricator.com/D20285
Summary:
Ref T13074. Currently, if you "Move Tasks to Column..." on a board and some of the tasks require MFA to edit, the workflow fatals out.
After this change, it works properly. You still have to answer a separate MFA prompt for //each// task, which is a little ridiculous, but at least doable. A reasonable future refinement would be to batch these MFA prompts, but this is currently the only use case for that.
Test Plan: Set a task to a "Require MFA" status, bulk-moved it with other tasks on a workboard. Was prompted, answered MFA prompt, got a move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20282
Summary:
See PHI1098. When users comment on objects, they are automatically subscribed. And when `@alice` mentions `@bailey` on a task, that usually subscribes `@bailey`.
These rules make less sense if the user is a bot. There's generally no reason for a bot to automatically subscribe to objects it acts on (it's not going to read email and follow up later), and it can always subscribe itself pretty easily if it wants (since everything is `*.edit` now and supports subscribe transactions).
Also, don't subscribe bots when they're mentioned for similar reasons. If users really want to subscribe bots, they can do so explicitly.
These rules seem slightly like "bad implicit magic" since it's not immediately obvious why `@abc` subscribes that user but `@xyz` may not, but some of these rules are fairly complicated already (e.g., `@xyz` doesn't subscribe them if they unsubscribed or are implicitly subscribed) and this feels like it gets the right/desired result almost-always.
Test Plan:
On a fresh task:
- Mentioned a bot in a comment with `@bot`.
- Before patch: bot got CC'd.
- After patch: no CC.
- Called `maniphest.edit` via the API to add a comment as a bot.
- Before patch: bot got CC'd.
- After patch: no CC.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20284
Summary:
Depends on D20277. Ref T10333.
- Put profile icons on "Group by Owner".
- Add a similar "Group by Author". Probably not terribly useful, but cheap to implement now.
- Add "Sort by Title". Very likely not terribly useful, but cheap to implement and sort of flexible?
Test Plan: {F6265396}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20278
Summary: Depends on D20279. See D20269. Agreed that explicit `-1` is probably more clear.
Test Plan: Viewed boards in each sort/group order.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20281
Summary:
Depends on D20276. Ref T10333. This one is a little bit rough/experimental, and I'm sort of curious what feedback we get about it. Weird stuff:
- All statuses are always shown, even if the filter prevents tasks in that status from appearing (which is the default, since views are "Open Tasks" by default).
- Pro: you can close tasks by dragging them to a closed status.
- Con: lots of empty groups.
- The "Duplicate" status is shown.
- Pro: Shows closed duplicate tasks.
- Con: Dragging tasks to "Duplicate" works, but is silly.
- Since boards show "open tasks" by default, dragging stuff to a closed status and then reloading the board causes it to vanish. This is kind of how everything works, but more obvious/defaulted on "Status".
These issues might overwhelm its usefulness, but there isn't much cost to nuking it in the future if feedback is mostly negative/confused.
Test Plan: Grouped a workboard by status, dragged stuff around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20277
Summary: Depends on D20275. Fixes T10578. This is a static sorting (like "By Date Created") where you can't change point values by dragging. You can still drag cards between columns, or use the "Edit" icon to change point values.
Test Plan: {F6265191}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20276
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary: Depends on D20272. Ref T13074. When a task requires MFA to edit, you currently get a fatal. Provide a cancel URI so the prompt works and the edit can go through.
Test Plan:
- Locked a task, dragged it on a workboard.
- Before: fatal trying to build an MFA gate.
- After: got MFA gated, answered prompt, action went through.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20273
Summary:
Depends on D20270. Ref T10333. If you create a task with a new owner, or edit a task and change the priority/owner, we want to move it (and possibly create a new header) when the response comes back.
Make sure the response includes the appropriate details about the object's header and position.
Test Plan:
- Grouped by Owner.
- Created a new task with a new owner, saw the header appear.
- Edited a task and changed it to give it a new owner, saw the header appear.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20271
Summary: Depends on D20269. Ref T10333. Now that orderings are modularized, this is fairly easy to implement. This isn't super fancy for now (e.g., no profile images) but I'll touch it up in a general polish followup.
Test Plan: {F6264596}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20270
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20265. Ref T10333. Now that neither task lists nor workboards use subpriority, we can remove all the readers and writers.
I'm not actually getting rid of the column data yet, but anticipate doing that in a future change.
Note that the subpriority algorithm (removed here) is possibly better than the "natural order" algorithm still in use. It's a bit more clever, and likely performs far fewer writes. I might make the "natural order" code use an algorithm more similar to the "subpriority" algorithm in the future.
Test Plan: Grepped for `subpriority`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20266
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T13249. Ref T13258. In some cases, builds are not idempotent and should not be restarted casually.
If the scary part is at the very end (deploy / provision / whatever), it could be okay to restart them if they previously failed.
Also, make the "reasons why you can't restart" and "explanations of why you can't restart" logic a little more cohesive.
Test Plan:
- Tried to restart builds in various states (failed/not failed, restartable always/if failed/never, already restarted), got appropriate errors or restarts.
- (I'm not sure the "Autoplan" error is normally reachable, since you can't edit autoplans to configure things to let you try to restart them.)
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T13249
Differential Revision: https://secure.phabricator.com/D20252
Summary:
Depends on D20259. Now that we can index Herald rules to affected objects, show callers on the "Webhooks" UI.
A few other rule types could get indexes too ("Sign Legalpad Documents", "Add Reviewers", "Add Subscribers"), but I think they're less likely to be useful since those triggers are usually more obvious (the transaction timeline makes it clearer what happened/why). We could revisit this in the future now that it's a possibility.
Test Plan: {F6260106}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20260
Summary:
See PHI1123. The key on this table is `<resource, type, code>` but we currently query for only `<type, code>`. This can't use the key.
Constrain the query to the resource we expect (the repository) so it can use the key.
Test Plan: Pushed files using LFS. See PHI1123 for more, likely.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20261
Summary:
Ref T13258. Provide an easy way to find rules which trigger a particular build plan from the build plan page.
The implementation here ends up a little messy: we can't just search for `actionType = 'build' AND targetPHID = '<build plan PHID>'` since the field is a blob of JSON.
Instead, make rules indexable and write a "build plan is affected by rule actions" edge when indexing rules, then search on that edge.
For now, only "Run Build Plan: ..." rules actually write this edge, since I think (?) that it doesn't really have meaningful values for other edge types today. Maybe "Call Webhooks", and you could get a link from a hook to rules that trigger it? Reasonable to do in the future.
Things end up a little bit rough overall, but I think this panel is pretty useful to add to the Build Plan page.
This index needs to be rebuilt with `bin/search index --type HeraldRule`. I'll call this out in the changelog but I'm not planning to explicitly migrate or add an activity, since this is only really important for larger installs and they probably (?) read the changelog. As rules are edited over time, this will converge to the right behavior even if you don't rebuild the index.
Test Plan: {F6260095}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20259
Summary: Depends on D20256. Ref T13249. See PHI1115. This primarily makes `bin/policy unlock --owner epriestley T123` work. This is important for "Edit Locked" tasks, since changing the edit policy doesn't really do anything.
Test Plan: Hard-locked a task as "alice", reassigned it to myself with `bin/policy unlock --owner epriestley`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20257
Summary:
See PHI1115. Ref T13249. Currently, you can `bin/policy unlock` objects which have become inaccessible through some sort of policy mistake.
This script uses a very blunt mechanism to perform unlocks: just manually calling `setXPolicy()` and then trying to `save()` the object. Improve things a bit:
- More surgical: allow selection of which policies you want to adjust with "--view", "--edit", and "--owner" (potentially important for some objects like Herald rules which don't have policies, and "edit-locked" tasks which basically ignore the edit policy).
- More flexible: Instead of unlocking into "All Users" (which could be bad for stuff like Passphrase credentials, since you create a short window where anyone can access them), take a username as a parameter and set the policy to "just that user". Normally, you'd run this as `bin/policy unlock --view myself --edit myself` or similar, now.
- More modular: We can't do "owner" transactions in a generic way, but lay the groundwork for letting applications support providing an owner reassignment mechanism.
- More modern: Use transactions, not raw `set()` + `save()`.
This previously had some hard-coded logic around unlocking applications. I've removed it, and the new generic stuff doesn't actually work. It probably should be made to work at some point, but I believe it's exceptionally difficult to lock yourself out of applications, and you can unlock them with `bin/config set phabricator.application-settings ...` anyway so I'm not too worried about this. It's also hard to figure out the PHID of an application and no one has ever asked about this so I'd guess the reasonable use rate of `bin/policy unlock` to unlock applications in the wild may be zero.
Test Plan:
- Used `bin/policy unlock` to unlock some objects, saw sensible transactions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20256
Summary:
Ref T13249. See PHI1115. I initially wanted to make `bin/policy unlock --owner <user> H123` work to transfer ownership of a Herald rule, although I'm no longer really sure this makes much sense.
In any case, this makes things a little better and more modern.
I removed the storage table for rule comments. Adding comments to Herald rules doesn't work and probably doesn't make much sense.
Test Plan: Created and edited Herald rules, grepped for all the transaction type constants.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20258
Summary:
Ref T13249. Using "--as" to call some Conduit methods as a user can currently fatal when trying to access settings/preferences.
Allow inline regeneration of user caches.
Test Plan: Called `project.edit` to add a member. Before: constructing a policy field tried to access the user's preferences and failed. After: Smooth sailing.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20255
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
Summary:
Ref T13258. The general idea here is "if arc land prompted you and you hit 'y', you get a warning about it on the timeline".
This is similar to the existing warning about landing revisions in the wrong state and hitting "y" to get through that. See D18808, previously.
These warnings make it easier to catch process issues at a glance, especially because the overall build status is now more complicated (and may legally include some failures on tests which are marked as unimportant).
The transaction stores which builds had problems, but I'm not doing anything to render that for now. I think you can usually figure it out from the UI already; if not, we could refine this.
Test Plan:
- Used `bin/differential attach-commit` to trigger extraction/attachment.
- Attached a commit to a revision with various build states, and various build plan "Warn When Landing" flags.
- Got sensible warnings and non-warnings based on "Warn When Landing" setting.
{F6251631}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20239
Summary: Ref T13258. Make the "Affects Buildable" option actually work.
Test Plan:
- As in previous change, created a "wait for HTTP request" build plan and had it always run against every revision.
- Created revisions, waited a bit, then sent the build a "Fail" message, with different values of "Affects Buildable":
- "Always": Same behavior as today. Buildable waited for the build, then failed when it failed.
- "While Building": Buildable waited for the build, but passed even though it failed (buildable has green checkmark even though build is red):
{F6250359}
- "Never": Buildable passed immediately (buildable has green checkmark even though build is still running):
{F6250360}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20233
Summary: Ref T13258. Makes the new "Hold Drafts" behavior actually work.
Test Plan:
- Created a build plan which does "Make HTTP Request" somewhere random and then waits for a message.
- Created a Herald rule which "Always" runs this plan.
- Created revisions, loaded them, then sent their build targets a "fail" message a short time later.
- With "Always": Current behavior. Revision was held as a draft while building, and returned to me for changes when the build failed.
- With "If Building": Revision was held as a draft while building, but promoted once the build failed.
- With "Never": Revision promoted immediately, ignoring the build completely.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20232
Summary:
Ref T13258. Implements the "Restartable" behavior, to control whether a build may be restarted or not.
This is fairly straightforward because there are already other existing reasons that a build may not be able to be restarted.
Test Plan: Restarted a build. Marked it as not restartable, saw "Restart" action become disabled. Tried to restart it anyway, got a useful error message.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20230
Summary:
Ref T13258. Fixes T11415. This makes "Runnable" actually do something:
- With "Runnable" set to "If Editable" (default): to manually run, pause, resume, abort, or restart a build, you must normally be able to edit the associated build plan.
- If you toggle "Runnable" to "If Viewable", anyone who can view the build plan may take these actions.
This is pretty straightforward since T9614 already got us pretty close to this ruleset a while ago.
Test Plan:
- Created a Build Plan, set "Can Edit" to just me, toggled "Runnable" to "If Viewable"/"If Editable", tried to take actions as another user.
- With "If Editable", unable to run, pause, resume, abort, or restart as another user.
- With "If Viewable", those actions work.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T11415
Differential Revision: https://secure.phabricator.com/D20229
Summary: Ref T13258. This will support changing behaviors in "arc land".
Test Plan: Called "harbormaster.buildplan.search", saw behavior information in results.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20228
Summary:
Depends on D20219. Ref T13258. Ref T11415. Installs sometimes have long-running builds or unimportant builds which they may not want to hold up drafts, affect buildable status, or warn during `arc land`.
Some builds have side effects (like deployment or merging) and are not idempotent. They can cause problems if restarted.
In other cases, builds are isolated and idempotent and generally safe, and it's okay for marketing interns to restart them.
To address these cases, add "Behaviors" to Build Plans:
- Hold Drafts: Controls how the build affects revision promotion from "Draft".
- Warn on Land: Controls the "arc land" warning.
- Affects Buildable: Controls whether we care about this build when figuring out if a buildable passed or failed overall.
- Restartable: Controls whether this build may restart or not.
- Runnable: Allows you to weaken the requirements to run the build if you're confident it's safe to run it on arbitrary old versions of things.
NOTE: This only implements UI, none of these options actually do anything yet.
Test Plan:
Mostly poked around the UI. I'll actually implement these behaviors next, and vet them more thoroughly.
{F6244828}
{F6244830}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T11415
Differential Revision: https://secure.phabricator.com/D20220
Summary:
Ref T13259. In some configurations, making a request to ourselves may return a VPN/Auth response from some LB/appliance layer.
If this response begins or ends with whitespace, we currently detect it as "extra whitespace" instead of "bad response".
Instead, require that the response be nearly correct (valid JSON with some extra whitespace, instead of literally anything with some extra whitespace) to hit this specialized check. If we don't hit the specialized case, use the generic "mangled" response error, which prints the actual body so you can figure out that it's just your LB/auth thing doing what it's supposed to do.
Test Plan:
- Rigged responses to add extra whitespace, got "Extra Whitespace" (same as before).
- Rigged responses to add extra non-whitespace, got "Mangled Junk" (same as before).
- Rigged responses to add extra whitespace and extra non-whitespace, got "Mangled Junk" with a sample of the document body instead of "Extra Whitespace" (improvement).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20235
Summary: See PHI1112. See T784. Although some more general/flexible solution is arriving eventually, adding this rule seems reasonable for now, since it's not a big deal if we remove it later to replace this with some fancier system.
Test Plan: Created a diff with the official Go generated marker, saw the changeset marked as generated.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20237
Summary:
Ref T13259. If we miss the separate CSRF step in Duo and proceed directly to prompting, we may fail to build a response which turns into a real control and fatal on `null->setLabel()`.
Instead, let MFA providers customize their "bare prompt dialog" response, then make Duo use the same "you have an outstanding request" response for the CSRF and no-CSRF workflows.
Test Plan: Hit Duo auth on a non-CSRF workflow (e.g., edit an MFA provider with Duo enabled). Previously: `setLabel()` fatal. After patch: smooth sailing.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20234
Summary:
Ref T13121. When you connect to a host with SSH, don't already know the host key, and don't have strict host key checking, it prints "Permanently adding host X to known hosts". This is super un-useful.
In a perfect world, we'd probably always have strict host key checking, but this is a significant barrier to configuration/setup and I think not hugely important (MITM attacks against SSH hosts are hard/rare and probably not hugely valuable). I'd imagine a more realistic long term approach is likely optional host key checking.
For now, try using `LogLevel=ERROR` instead of `LogLevel=quiet` to suppress this error. This should be strictly better (since at least some messages we want to see are ERROR or better), although it may not be perfect (there may be other INFO messages we would still like to see).
Test Plan:
- Ran `ssh -o LogLevel=... -o 'StrictHostKeyChecking=no' -o 'UserKnownHostsFile=/dev/null'` with bad credentials, for "ERROR", "quiet", and default ("INFO") log levels.
- With `INFO`, got a warning about adding the key, then an error about bad credentials (bad: don't want the key warning).
- With `quiet`, got nothing (bad: we want the credential error).
- With `ERROR`, got no warning but did get an error (good!).
Not sure this always gives us exactly what we want, but it seems like an improvement over "quiet".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13121
Differential Revision: https://secure.phabricator.com/D20240
Summary:
See PHI1059. If you close a task, we apply an "alice closed a subtask: X" transaction to its parents.
This transaction is purely informative, but currently requires `CAN_EDIT` permission after T13186. However, we'd prefer to post this transaction anyway, even if: the parent is locked; or the parent is not editable by the acting user.
Replace the implicit `CAN_EDIT` requirement with no requirement.
(This transaction is only applied internally (by closing a subtask) and can't be applied via the API or any other channel, so this doesn't let attackers spam a bunch of bogus subtask closures all over the place or anything.)
Test Plan:
- Created a parent task A with subtask B.
- Put task A into an "Edits Locked" status.
- As a user other than the owner of A, closed B.
Then:
- Before: Policy exception when trying to apply the "alice closed a subtask: B" transaction to A.
- After: B closed, A got a transaction despite being locked.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20223
Summary:
Depends on D20218. Ref T13258. It's somewhat cumbersome to get from build plans to related builds but this is a reasonable thing to want to do, so make it a little easier.
Also clean up / standardize / hint a few things a little better.
Test Plan: {F6244116}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20219
Summary: Depends on D20217. Ref T13258. Mostly for completeness. You can't edit build steps so this may not be terribly useful, but you can do bulk policy edits or whatever?
Test Plan: Edited a build plan via API.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20218
Summary: Depends on D20216. Ref T13258. Bland infrastructure update to prepare for bigger things.
Test Plan: Created and edited a build plan.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258
Differential Revision: https://secure.phabricator.com/D20217
Summary: Ref T13088. Build Plans currently have a "Created" date in the right-hand "Curtain" UI, but this is unusual and the creation date is evident from the timeline. It's also not obvious why anyone would care. Remove it for simplicity/consistency. I think this may have just been a placeholder during initial implementation.
Test Plan: Viewed a build plan, no more "Created" element.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20216
Summary:
See PHI1096. Depends on D20213. An install is reporting a hard-to-reproduce issue where a non-transaction gets queued by Herald somehow. This might be in third-party code.
Sprinkle the relevant parts of the code with `final` and type checking to try to catch the problem before it causes a fatal we can't pull a stack trace out of.
Test Plan: Poked around locally (e.g., edited revisions to cause Herald to trigger), but hard to know if this will do what it's supposed to or not without deploying and seeing if it catches anything.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20214
Summary: Depends on D20209. Ref T13255. It would probably be nice to make this into a "real" `*.search` API method some day, but at least document the features for now.
Test Plan: Read documentation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13255
Differential Revision: https://secure.phabricator.com/D20211
Summary:
Depends on D20208. Ref T13255. See that task for some long-winded discussion and rationale. Short version:
- This is a list of operations instead of a list of old/new PHIDs because of scalability issues for large lists (T13056).
- This is a fairly verbose list (instead of, for example, the more concise internal map we sometimes use with "+" and "-" as keys) to try to make the structure obvious and extensible in the future.
- The "add" and "remove" echo the `*.edit` operations.
Test Plan: Called `transaction.search` on an object with project tag changes, saw them in the results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13255
Differential Revision: https://secure.phabricator.com/D20209
Summary: Ref T13255. The "transaction.search" API method currently does not support author constraints, but this is a reasonable thing to support.
Test Plan: Queried transactions by author, hit the error cases.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13255
Differential Revision: https://secure.phabricator.com/D20208
Summary: Fixes T13254. See that task for details.
Test Plan: Used iOS Simulator to do a login locally, didn't get blocked. Verified CSP includes "m.facebook.com".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13254
Differential Revision: https://secure.phabricator.com/D20206
Summary: Ref T13251. See <https://phabricator.wikimedia.org/T216849>.
Test Plan:
- With more than 100 projects (or, set `$limit = 3`)...
- Edit a task, then click the "Browse" magnifying glass icon next to the "Tags" typeahead.
- Before change: fatal on 'q' being null.
- After change: no fatal.
Reviewers: amckinley, 20after4
Reviewed By: amckinley
Maniphest Tasks: T13251
Differential Revision: https://secure.phabricator.com/D20204
Summary:
Ref T5401. Depends on D20201. Add timestamps to worker tasks to track task creation, and pass that through to archive tasks. This lets us measure the total time the task spent in the queue, not just the duration it was actually running.
Also displays this information in the daemon status console; see screenshot: {F6225726}
Test Plan:
Stopped daemons, ran `bin/search index --all --background` to create lots of tasks, restarted daemons, observed expected values for `dateCreated` and `epochArchived` in the archive worker table.
Also tested the changes to `unarchiveTask` by forcing a search task to permanently fail and then `bin/worker retry`ing it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5401
Differential Revision: https://secure.phabricator.com/D20200
Summary:
Depends on D20197. Ref T13161. We currently try to build a "ScopeEngine" even for diffs with no context (e.g., `git diff` instead of `git diff -U9999`).
Since we don't have any context, we won't really be able to figure out anything useful about scopes. Also, since ScopeEngine is pretty strict about what it accepts, we crash.
In these cases, just don't build a ScopeEngine.
Test Plan: Viewed a diff I copy/pasted with `git diff` instead of an `arc diff` / `git diff -U99999`, got a sensible diff with no context instead of a fatal.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20198
Summary:
Depends on D20196. See PHI985. When empty, the "moved/copied" gutter currently renders with the same background color as the rest of the line. This can be misleading because it makes code look more indented than it is, especially if you're unfamiliar with the tool:
{F6225179}
If we remove this misleading coloration, we get a white gap. This is more clear, but looks a little odd:
{F6225181}
Instead, give this gutter a subtle background fill in all casses, to make it more clear that it's a separate gutter region, not a part of the text diff:
{F6225183}
Test Plan: See screenshots. Copied text from a diff, added/removed inlines, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20197
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T13253. Long ago, daemon logs were visible in the web UI. They were removed because access to logs generally does not conform to policy rules, and may leak the existence (and sometimes contents) of hidden objects, occasionally leak credentials in certain error messages, etc.
These bits and pieces were missed.
Test Plan: Grepped for removed symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13253
Differential Revision: https://secure.phabricator.com/D20199
Summary:
Ref T13161.
- Don't show ">>" when the line indentation changed but the text also changed, this is just "the line changed".
- The indicator seems a little cleaner if we just reuse the existing "bright" colors, which already have colorblind colors anyway.
Test Plan: Got slightly better rendering for some diffs locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20195
Summary:
Ref T12822. Ref T2495. This is the good version of D20193.
Currently, we display various nonprintable characters (ZWS, nonbreaking space, various control characters) as themselves, so they're generally invisible.
In T12822, one user reports that all their engineers frequently type ZWS characters into source somehow? I don't really believe this (??), and this should be fixed in lint.
That said, the only real reason not to show these weird characters in a special way was that it would break copy/paste: if we render ZWS as "🐑", and a user copy-pastes the line including the ZWS, they'll get a sheep.
At least, they would have, until D20191. Now that this whole thing is end-to-end Javascript magic, we can copy whatever we want.
In particular, we can render any character `X` as `<span data-copy-text="Y">X</span>`, and then copy "Y" instead of "X" when the user copies the node. Limitations:
- If users select only "X", they'll get "X" on their clipboard. This seems fine. If you're selecting our ZWS marker *only*, you probably want to copy it?
- If "X" is more than one character long, users will get the full "Y" if they select any part of "X". At least here, this only matters when "X" is several spaces and "Y" is a tab. This also seems fine.
- We have to be kind of careful because this approach involves editing an HTML blob directly. However, we already do that elsewhere and this isn't really too hard to get right.
With those tools in hand:
- Replace "\t" (raw text / what gets copied) with the number of spaces to the next tab stop for display.
- Replace ZWS and NBSP (raw text) with a special marker for display.
- Replace control characters 0x00-0x19 and 0x7F, except for "\t", "\r", and "\n", with the special unicode "control character pictures" reserved for this purpose.
Test Plan:
- Generated and viewed a file like this one:
{F6220422}
- Copied text out of it, got authentic raw original source text instead of displayed text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822, T2495
Differential Revision: https://secure.phabricator.com/D20194
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20185. Ref T13161. Fixes T6791.
See some discusison in T13161. I want to move to a world where:
- whitespace changes are always shown, so users writing YAML and Python are happy without adjusting settings;
- the visual impact of indentation-only whitespace changes is significanlty reduced, so indentation changes are easy to read and users writing Javascript or other flavors of Javascript are happy.
D20181 needs a little more work, but generally tackles these visual changes and lets us always show whitespace changes, but show them in a very low-impact way when they're relatively unimportant.
However, a second aspect to this is how the diff is "aligned". If this file:
```
A
```
..is changed to this file:
```
X
A
Y
Z
```
...diff tools will generally produce this diff:
```
+ X
A
+ Y
+ Z
```
This is good, and easy to read, and what humans expect, and it will "align" in two-up like this:
```
1 X
1 A 2 A
3 Y
4 Z
```
However, if the new file looks like this instead:
```
X
A'
Y
Z
```
...we get a diff like this:
```
- A
+ X
+ A'
+ Y
+ Z
```
This one aligns like this:
```
1 A
1 X
2 A'
3 Y
4 Z
```
This is correct if `A` and `A'` are totally different lines. However, if `A'` is pretty much the same as `A` and it just had a whitespace change, human viewers would prefer this alignment:
```
1 X
1 A 2 A'
3 Y
4 Z
```
Note that `A` and `A'` are different, but we've aligned them on the same line. `diff`, `git diff`, etc., won't do this automatically, and a `.diff` doesn't have a way to say "these lines are more or less the same even though they're different", although some other visual diff tools will do this.
Although `diff` can't do this for us, we can do it ourselves, and already have the code to do it, because we already nearly did this in the changes removed in D20185: in "Ignore All" or "Ignore Most" mode, we pretty much did this already.
This mostly just restores a bit of the code from D20185, with some adjustments/simplifications. Here's how it works:
- Rebuild the text of the old and new files from the diff we got out of `arc`, `git diff`, etc.
- Normalize the files (for example, by removing whitespace from each line).
- Diff the normalized files to produce a second diff.
- Parse that diff.
- Take the "alignment" from the normalized diff (whitespace removed) and the actual text from the original diff (whitespace preserved) to build a new diff with the correct text, but also better diff alignment.
Originally, we normalized with `diff -bw`. I've replaced that with `preg_replace()` here mostly just so that we have more control over things. I believe the two behaviors are pretty much identical, but this way lets us see more of the pipeline and possibly add more behaviors in the future to improve diff quality (e.g., normalize case? normalize text encoding?).
Test Plan:
{F6217133}
(Also, fix a unit test.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T6791
Differential Revision: https://secure.phabricator.com/D20187
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary:
Depends on D20179. Ref T13088. See PHI351. See PHI1018. In various cases, unit tests names are 19 paths mashed together.
This is probably not an ideal name, and the test harness should probably pick a better name, but if users are fine with it and don't want to do the work to summarize on their own, accept them. We may summarize with "..." in some cases depending on how this fares in the UI.
The actual implementation is a separate "strings" table which is just `<hash-of-string, full-string>`. The unit message table can end up being mostly strings, so this should reduce storage requirements a bit.
For now, I'm not forcing a migration: new writes use the new table, existing rows retain the data. I plan to provide a migration tool, recommend migration, then force migration eventually.
Prior to that, I'm likely to move at least some other columns to use this table (e.g., lint names), since we have a lot of similar data (arbitrarily long user string constants that we are unlikely to need to search or filter).
Test Plan: {F6213819}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20180
Summary:
Depends on D20177. Fixes T12425. See <https://discourse.phabricator-community.org/t/importing-libphutil-repository-on-fresh-phabricator-triggers-an-error/2391/>.
Search indexing currently reports failures to load objects to the log. This log is noisy, not concerning, not actionable, and not locally debuggable (it depends on the reporting user's entire state).
I think one common, fully legitimate case of this is indexing temporary files: they may fully legitimately be deleted by the time the indexer runs.
Instead of sending these errors to the log, eat them. If users don't notice the indexes aren't working: no harm, no foul. If users do notice, we'll run or have them run `bin/search index` as a first diagnostic step anyway, which will now report an actionable/reproducible error.
Test Plan:
- Faked errors in both cases (initial load, re-load inside the locked section).
- Ran indexes in strict/non-strict mode.
- Got exception reports from both branches in strict mode.
- Got task success without errors in both cases in non-strict mode.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12425
Differential Revision: https://secure.phabricator.com/D20178
