Summary:
See f5c2a2ab4b (commitcomment-2333247)
Copy of working implementation from PHPMailerLite.
Also expose the SSL/TLS options.
Test Plan: Switched to this mailer, configured Gmail SMTP, sent email. Verified email arrived intact.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, mbeck
Differential Revision: https://secure.phabricator.com/D4239
Summary:
This adds a configuration option for repositories to be marked as managed
by phabricator, which is then used by the pullLocal daemon to try to recover
from some errors it runs into.
Test Plan: Set a bogus uri for a repo, saw that the pullLocal daemon fixed it.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3680
Summary:
Support SMTP as the mailer and user could turn on SMTP authentication if needed.
Import PHPMailer as PHPMailerLite doesn't support SMTP.
Make class PhabricatorMailImplementationPHPMailerAdapter final.
Test Plan: N/A
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2139
Differential Revision: https://secure.phabricator.com/D4063
Summary: I think we've sorted out enough of the problems with these to turn them on for everyone. The real-time component remains configuration-dependent.
Test Plan: Turned off "notification.enabled", still saw notifications.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4120
Summary: This was suggested in D2625#2 and is a competition for D2625.
Test Plan: Viewed wide and non-wide diff in Firefox, Chrome, IE.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, ReturnZero
Differential Revision: https://secure.phabricator.com/D2652
Summary:
Allows to use file storage in different Amazon S3 regions as well as it
should support different file storage services with S3 compliant API
(eg.: Bashos' Riak CS).
Test Plan:
1. Create S3 bucket in non-default AWS Region (e.g. EU/Ireland).
2. Set appropriate bucket policy to allow upload & download objects for the specified access credentials.
3. Set `amazon-s3.endpoint` in your configuration file to an appropriate value (e.g. `s3-eu-west-1.amazonaws.com` for EU region).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3965
Summary: 'cuz we need it in arcanist for T479 to commit as author
Test Plan: verified the return value was correct in conduit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T479
Differential Revision: https://secure.phabricator.com/D3917
Summary: don't need it now that uploading files is so easy. Plus it made for some buggy jonx if / when there were bad image links coupled with caching. In theory this is a lot less pretty though if folks linked to a bunch of files served elsewhere using images.
Test Plan: http://does-not-exist.com/imaginary.jpg rendered as a link!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2000
Differential Revision: https://secure.phabricator.com/D3908
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: so folks can write applications and whatnot.
Test Plan: set feed.http-hooks to local dev instance (200) and localhost (500) in my conf. Verified succcess and retrying respectively.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T305
Differential Revision: https://secure.phabricator.com/D3874
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary:
Allow skins to serve arbitrary resources without needing to be mapped, so we can have a vibrant community of amateur skinners.
For "basic" skins, just put all the "css/" on the page always.
Includes an image to prove that works.
@vrana, pretty sure this has no impact outside of Phame but it does change Celerity so it might be to blame if there's any weirdness with static resources.
Test Plan:
{F21341}
{F21340}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3719
Summary:
Lower the barrier to entry for installing and creating skins, so we can kill Wordpress. You can now install skins by dropping them into a directory, and build either "advanced" (full phutil library) skins or "basic" (simple PHP templates) skins.
Next up is getting static resources working in an easy way for skins.
I put these in `externals/` for now so they don't get hit by lint.
Test Plan: Viewed the Pokeblog with the Oblivious skin.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3717
Summary: this lets users specify what "name" to use in email addresses
Test Plan: changed the conf setting in my local instance and used phabricator. observed name format changes
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1862
Differential Revision: https://secure.phabricator.com/D3639
Summary: instance-wide this setting be
Test Plan: made a new task and noted the default priority honored what was in btrahan.conf
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1842
Differential Revision: https://secure.phabricator.com/D3626
Summary: this then enables people to create blog.theircompany.com. And for us, blog.phacility.com...!
Test Plan:
- created custom URIs of various goodness and verified the error messages were sensical.
- verified if "false" in configuration then custom uri stuff disappears
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3542
Summary:
Pygments already supports Haskell and Objective-C syntax
highlighting, but the default in Phabricator excluded them from the
dropdown for the paste tool.
This adds Haskell and Objective-C to the default list of languages.
Test Plan:
Started up Phabricator sandbox instance, confirmed Haskell
and Objective-C worked in paste app.
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3510
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary: Rehash of D3411. In cgi/fcgi setups we have no idea if the request is HTTP or HTTPS as far as I can tell, so make this config-triggered again. Also handle @vrana's "off" case.
Test Plan: Set this flag, observed redirect to https when `$_SERVER['HTTPS']` was absent.
Reviewers: nh, vrana
Reviewed By: nh
CC: aran
Differential Revision: https://secure.phabricator.com/D3420
Summary: this is useful for certain workflows, typically where the reviewer is a gatekeeper of sorts who does the acutal commit. Special thanks to D2900 which made this relatively brain-dead to code up.
Test Plan: set to "true" in my local development environment and verified test user "xerxes" could close my stuff
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1732
Differential Revision: https://secure.phabricator.com/D3398
Summary:
I like systems that just work. It is possible to store files larger than max_allowed_packet in MySQL and we shouldn't demand it.
It also fixes a problem when file was smaller than `storage.mysql-engine.max-size` but its escaped version was larger than `max_allowed_packet`.
Test Plan: Reduced the size to 5e4, uploaded 90 kB file, checked the queries in DarkConsole, downloaded the file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3392
Summary:
We have this hybrid "create / last few pastes" landing screen right now but I ~never use the list at the bottom and it makes the controller kind of complicated. I want to let you edit pastes too, and this generally simplifies things.
Also makes the textarea monospaced and cleans up the fork logic a bit.
Test Plan: Created, forked pastes. Viewed paste lists. Viewed pastes.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1690
Differential Revision: https://secure.phabricator.com/D3375
Summary: Allow custom LDAP port to be defined in config file
Test Plan: Test login works by specifying a custom port
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3153
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- These don't fit anywhere in the new design.
- Even if we figure out how to fit them in, 220px logos definitely won't fit on the 320px iPhone screen so anyone who has a custom logo will have to rework them anyway.
- Kill it for now, and once we get the new design in and working maybe we can restore it somehow.
Test Plan: Loaded local install, no logo. Grepped for config.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3101
Summary:
In some cases, we shell out to things (like Pygments for syntax highlighting).
However, on cloud servers or shared web servers, those binaries aren't always
installed system-wide.
This patch allows for appending to the environment variable $PATH, to look for
other, non-default places for these binaries.
Test Plan:
* Copied the patch over to a test OpenShift instance and applied it.
* Added the path to my local copy of Pygments (pygmentize wasn't available on the system)
into the Phabricator config.
* Refreshed a Paste page, and saw colors.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3091
Summary:
- the current LDAP auth flow expects a DN to look like
cn=ossareh,ou=Users,dc=example,dc=com
- however many LDAP setups have their dn look something like
cn=Mike Ossareh,ou=Users,dc=example,dc=com
Test Plan:
Test if logins work with a LDAP setup which has cn=Full Name
instead of cn=username.
To test you should ensure you set the properties needed to
trigger the search before login as detailed in conf/default.conf.php
Reviewers: epriestley
CC: mbeck, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3072
Summary:
As we work through @chad's redesign, one thing I want to do is improve the tablet/mobile experience.
Add a "device" behavior which sets a "device-phone", "device-tablet" or "device-desktop" class on the root div. The behavior (device names, width triggers) is mostly based on Bootstrap.
Also adds a preview viewport=meta tag, which makes the iPhone not scale the page like crazy and is a desirable end state, but currently makes the app less usable since things get cut off.
Test Plan:
Added some classes like this:
.device-desktop {
background: blue;
}
.device-tablet {
background: orange;
}
.device-phone {
background: yellow;
}
...and loaded the site on a desktop, iPad and iPhone. Resized the window. Got the right background color in all cases.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D3063
Summary: MetaMTA + daemons used to be pretty hard but @nh landed some patches a while ago that make it way eaiser. Back off the "ooh scary config" text in the documentation, since this option will just work for ~every install now.
Test Plan: Read it.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1525
Differential Revision: https://secure.phabricator.com/D3037
Summary: In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0
Test Plan: Test if LDAP works with Windows 2003 AD
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3004
Summary: This keeps people in the correct To or CC field on multiplexed messages.
Test Plan:
with multiplexing on, checked that I received an email with me in the CC
field instead of the To field for a diff I'm CC'd on.
Reviewers: epriestley, jungejason, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2999
Summary: The Graph API exposes a new field, security_settings, which allows applications to see whether a user has enabled Secure Browsing. This diff adds a configuration setting to Phabricator which forces users to have Secure Browsing enabled when logging in via Facebook.
Test Plan: With the configuration setting off, verify that secure browsing does not affect the ability to log in. With the configuration setting on and secure browsing off, verify that the login attempts is rejected. Then verify that the login attempt succeeds when secure browsing is enabled.
Reviewers: epriestley
Reviewed By: epriestley
CC: arice, aran, Korvin
Maniphest Tasks: T1487
Differential Revision: https://secure.phabricator.com/D2964
Summary:
Currently, it's hard to debug performance issues on POST pages. Add flags to stop redirects and always collect profiles.
Also fix an issue with "all" profiles. This feature is mostly just for profiling DarkConsole itself and is rarely used, I think it's been broken for some time. There's no way to get to it with the UI.
NOTE: Some JS workflows don't stop on redirect because they use JS/AJAX redirects.
Test Plan: Enabled options, browsed, got stopped on redirects and had profiles generated. Disabled options and verified redirects and profiles work normally.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2990
Summary:
See T931. LLVM users would also prefer simpler mail, and have similarly harsh opinions about the current state of affairs.
Allow installs to disable the hint blocks if they don't want them.
Test Plan: Sent myself mail with these settings on/off, got mail with/without the blocks.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T931
Differential Revision: https://secure.phabricator.com/D2968
Test Plan: Displayed `.arcconfig` and verified that it is still highlighted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2987
