Summary:
Ref T9252. For building Phabricator itself, we need to have `libphutil/`, `arcanist/` and `phabricator/` next to one another on disk.
Expand the Drydock WorkingCopy resource so that it can have multiple repositories if the caller needs them.
I'm not sure if I'm going to put the actual config for this in Harbormaster or Drydock yet, but the WorkingCopy resource itself should work the same way in either case.
Test Plan: Restarted a Harbormaster build which leases a working copy, saw it build as expected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14180
Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary: Ref T9252. Show the user when a resource or lease has a pending release command in queue.
Test Plan: Released a resource and lease from the web UI. In both cases, saw a "releasing" tag and the action disable.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14177
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Fixes T9474
Test Plan: Make a poll, log out, still see it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9474
Differential Revision: https://secure.phabricator.com/D14179
Summary: Fixes T5991. If //all requested documents// failed to index, consider this a catastrophic failure and exit with an error code.
Test Plan:
- Ran `bin/search index --type TASK`, observed successful exit despite a small number of un-indexable documents.
- Ran `bin/search index PHID-TASK-xxx` for an invalid task, observed exception on exit after complete failure.
- Ran normal indexing through daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5991
Differential Revision: https://secure.phabricator.com/D14174
Summary: Ref T5991. See D14116. We are consistent but nonstandard in our use of exit codes. This document explains what we use exit codes for and why we do this.
Test Plan: Read it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5991
Differential Revision: https://secure.phabricator.com/D14173
Summary: Fixes T9260. That task has a good description of the issue.
Test Plan: Followed steps in T9260 to reproduce the issue. Applied patch; issue went away.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9260
Differential Revision: https://secure.phabricator.com/D14169
Summary: Ref T9272. This doesn't fix anything, just a little cleanup while I was looking at it.
Test Plan: Clicked "Show Details" on a couple description changes, got the same effect for less code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9272
Differential Revision: https://secure.phabricator.com/D14168
Summary: Fixes T9312. This is a bit fluff, but does simplify the view controller slightly and seems reasonable/useful in general.
Test Plan: Clicked "View Raw File" on a paste, got redirected to the raw file via a stable URI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9312
Differential Revision: https://secure.phabricator.com/D14167
Summary: Ref T9252. This mostly cleans up future and log handling, and edges us closer to being able to do useful work with Harbormaster / Drydock.
Test Plan:
- Added a "Run `ls -alh`" step to my trivial build plan.
- Ran it a bunch of times.
- Worked great.
- Also did an HTTP plan.
{F835227}
{F835228}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14161
Summary: Fixes T9434. I'm not sure exactly what changed behavior here, but we need a `needAuditRequests()`.
Test Plan: Ran a query which hit the exception (empty query was good enough, locally), then applied this patch; saw exception go away.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9434
Differential Revision: https://secure.phabricator.com/D14162
Summary:
Fixes T9427. Currently, replies to audits/commits go to "Cxxx", but so do replies to countdowns.
There is non real non-disruptive approach available here and this seems least-bad.
Test Plan:
- Made a comment on a commit.
- Fished the reply-to address out of `bin/mail list-oubound` + `bin/mail show-outbound` (it was now "COMMIT...").
- Sent mail to that address.
- Grabbed the raw message and wrote it to `mail.txt`.
- Ran `cat mail.txt | ./scripts/mail/mail_handler.php --process-duplicates`.
- Used `bin/mail list-inbound` + `bin/mail show-inbound` to verify receipt.
- Saw comment appear on audit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9427
Differential Revision: https://secure.phabricator.com/D14163
Summary:
Fixes T9328. There's no way to hit these error states by clicking things in the UI that I could find, but if you mash stuff into your URL bar or "Inspect Element..." and then edit the form to be full of garbage you can hit them.
Make them a little more informative and don't send them to the log, since these are pretty much just fancy 404s.
Test Plan: Bashed my fist on the URL bar to hit all these messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9328
Differential Revision: https://secure.phabricator.com/D14164
Summary:
Fixes T9145. We currently restrict lint codes to 32 bytes, but PHPCS generates codes like "PHPCS.E.PEAR.Comments.Messages.Line.TooLong".
These codes seem reasonable as codes, and we don't currently have any key-length problems or other technical concerns with simply raising the size of this column.
Test Plan: Ran `bin/storage upgrade` to pick up adjustments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9145
Differential Revision: https://secure.phabricator.com/D14166
Summary: Ref T9252. This is still crude in a few ways but basically works, at least for commits.
Test Plan:
- Made a build plan with just this build step.
- Ran `bin/harbormaster build --plan 10 ...` on a commit.
- It actually built a working copy, leased it, took no action, and released the lease. MAGIC~~~
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14160
Summary: Ref T9252. This is the same as D14157, just for Resources and their leases.
Test Plan: Viewed a resource, saw only active leases, clicked "View All Leases", queried, clicked around, used crumbs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14158
Summary:
Ref T9252. Currently, Drydock blueprint pages:
- show all resources, even if there are a million;
- show resources in all states, although destroyed resources are usually uninteresting;
- have some junky `$pager` code.
Instead, show the few most recent active resources and link to a filtered resource view in ApplicationSearch.
Test Plan:
- Viewed some blueprints.
- Clicked "View All Resources".
- Saw all resources.
- Used query / crumbs / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14157
Summary: Ref T9252. If you have a blueprint and you do not like that blueprint very much, you can disable it.
Test Plan: Disabled / enabled some blueprints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14156
Summary:
Ref T9252. Move these to the more modern stuff to pick up ordering and interface support for free.
Also work around the blueprint / custom field integration a little more gracefully.
Test Plan: Searched for blueprints, resources and leases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14155
Summary: Ref T9252. Resources always have a corresponding blueprint, and it makes sense to use the same policies for both.
Test Plan: Viewed resources in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14154
Summary:
Ref T9252. Drydock currently uses integer statuses, but there's no reason for this (they don't need to be ordered) and it makes debugging them, working with them, future APIs, etc., more cumbersome.
Switch to string instead.
Also rename `STATUS_OPEN` to `STATUS_ACTIVE` and `STATUS_CLOSED` to `STATUS_RELEASED` for consistency. This makes resources and leases have more similar states, and gives resource states more accurate names.
Test Plan: Browsed web UI, grepped for changed constants, applied patch, inspected database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14153
Summary:
Ref T9252. Leases currently have a `resourceID`, but this is a bit nonstandard and generally less flexible than giving them a `resourcePHID`.
In particular, a `resourcePHID` is easier to use when rendering interfaces, since you can get handles out of a PHID.
Add a PHID column, copy over all the PHIDs that correspond to existing IDs, then drop the ID column.
Test Plan:
- Browsed web UIs.
- Inspected database during/after migration.
- Grepped for `resourceID`.
- Allocated a new lease with `bin/drydock lease`.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14151
Summary: Ref T9252. This is now more consistent (same as the equivalent Resource state) and accurate (leases can end up in this state a bunch of ways, including by expiring).
Test Plan: `grep`, browsed around web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14150
Summary:
Ref T9464. If an ancient transaction doesn't have array values for whatever reason, we fail here.
Instead, just recover as gracefully as we can. We may get the transaction "wrong" in some sense, but this only impacts what is rendered in the transaction log.
Test Plan: This is nearly a year old and there's no real way to test it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9464
Differential Revision: https://secure.phabricator.com/D14149
Summary: Ref T6569. If a lease is activated with an expiration date, schedule a task to try to clean it up after that time.
Test Plan:
- Used `bin/drydock lease ... --until ...` to activate a lease in the near future.
- Waited for a bit.
- Saw it expire and get destroyed at the scheduled time.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14148
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary: Fixes T9388, lays in basic ApplicationSearch.
Test Plan: Build a dashboard with Posts and Blogs, click on search icon, get sent to correct page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9388
Differential Revision: https://secure.phabricator.com/D14146
Summary: Ref T9252. Some leases or resources may need to remove data, tear down VMs, etc., during cleanup. After they are released, queue a "destroy" phase for performing teardown.
Test Plan:
- Used `bin/drydock lease ...` to create a working copy lease.
- Used `bin/drydock release-lease` and `bin/drydock release-resource` to release the lease and then the working copy and host.
- Saw working copy and host get destroyed and cleaned up properly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569, T9252
Differential Revision: https://secure.phabricator.com/D14144
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary:
Ref T9458. This is basically the same as D13319, but the "Tags" field didn't get covered in that change.
Specifically, the issue is:
- We try to generate mail to a disabled user (later, we'll drop it without delivering it, but that filtering doesn't happen yet).
- The disabled user doesn't have permission to use Conduit (or any other Conduit-related problem occurs).
- We fail here, then retry generating the mail again later.
Instead, just degrade to not building the field and showing what went wrong.
Test Plan:
- Pushed some commits, saw mail generate.
- Added a fake exception to the field, saw the mail generate with an error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9458
Differential Revision: https://secure.phabricator.com/D14142
Summary: This UI should have a Collapsed PHUIObjectBoxView.
Test Plan: review a file in sandbox
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14139
Summary:
Ref T9253. For resources and leases that need to do something which takes a lot of time or requires waiting, allow them to allocate/acquire first and then activate later.
When we allocate a resource or acquire a lease, the blueprint can either activate it immediately (if all the work can happen quickly/inline) or activate it later. If the blueprint activates it later, we queue a worker to handle activating it.
Rebuild the "working copy" blueprint to work with this model: it allocates/acquires and activates in a separate step, once it is able to acquire a host.
Test Plan: With some power of imagination, brought up a bunch of working copies with `bin/drydock lease --type working-copy ...`
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14127
Summary: Ref T9253. Provide a meaningful command interface for Almanac hosts.
Test Plan:
Configued and leased a real host (`sbuild001.phacility.net`) and ran a command on it.
```
$ ./bin/drydock command --lease 90 -- ls /
bin
boot
core
dev
etc
home
initrd.img
lib
lib64
lost+found
media
mnt
opt
proc
root
run
sbin
srv
sys
tmp
usr
var
vmlinuz
```
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14126
Summary: Ref T9253. We had some un-modern use of UI elements, clean that up. Add a tab for showing slot locks so you don't have to fish around in the database.
Test Plan: Looked at blueprints, resources and leases. Looked at slot locks.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14119
Summary:
See discussion in D10304. There's a lot of context there, but the general idea is:
- Blueprints should manage locks in a granular way during the actual allocation/acquisition phase.
- Optimistic "slot locks" might a pretty good primitive to make that easy to implement and reason about in most cases.
The way these locks work is that you just pick some name for the lock (like the PHID of a resource) and say that it needs to be acquired for the allocation/acquisition to work:
```
...
->needSlotLock("mylock(PHID-XYZQ-...)")
...
```
When you fire off the acquisition or allocation, it fails unless it could acquire the slot with that name. This is really simple (no explicit lock management) and a pretty good fit for most of the locking that blueprints and leases need to do.
If you need to do limit-based locks (e.g., maximum of 3 locks) you could acquire a lock like this:
```
mylock(whatever).slot(2)
```
Blueprints generally only contend with themselves, so it's normally OK for them to pick whatever strategy works best for them in naming locks.
This may not work as well if you have a huge number of slots (e.g., 100TB you want to give out in 1MB chunks), or other complex needs for locks (like you have to synchronize access to some external resource), but slot locks don't need to be the only mechanism that blueprints use. If they run into a problem that slot locks aren't a good fit for, they can use something else instead. For now, slot locks seem like a good fit for the problems we currently face and most of the problems I anticipate facing.
(The release workflows have other race issues which I'm not addressing here. They work fine if nothing races, but aren't race-safe.)
Test Plan:
To create a race where the same binding is allocated as a resource twice:
- Add `sleep(10)` near the beginning of `allocateResource()`, after the free bindings are loaded but before resources are allocated.
- (Comment out slot lock acquisition if you have this patch.)
- Run `bin/drydock lease ...` in two windows, within 10 seconds of one another.
This will reliably double-allocate the binding because both blueprints see a view of the world where the binding is free.
To verify the lock works, un-comment it (or apply this patch) and run the same test again. Now, the lock fails in one process and only one resource is allocated.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Differential Revision: https://secure.phabricator.com/D14118
Summary:
Ref T9253. Broadly, this realigns Allocator behavior to be more consistent and straightforward and amenable to intended future changes.
This attempts to make language more consistent: resources are "allocated" and leases are "acquired".
This prepares for (but does not implement) optimistic "slot locking", as discussed in D10304. Although I suspect some blueprints will need to perform other locking eventually, this does feel like a good fit for most of the locking blueprints need to do.
In particular, I've made the blueprint operations on `$resource` and `$lease` objects more purposeful: they need to invoke an activator on the appropriate object to be implemented correctly. Before they invoke this activator method, they configure the object. In a future diff, this configuration will include specifying slot locks that the lease or resource must acquire. So the API will be something like:
$lease
->setActivateWhenAcquired(true)
->needSlotLock('x')
->needSlotLock('y')
->acquireOnResource($resource);
In the common case where slot locks are a good fit, I think this should make correct blueprint implementation very straightforward.
This prepares for (but does not implement) resources and leases which need significant setup steps. I've basically carved out two modes:
- The "activate immediately" mode, as here, immediately opens the resource or activates the lease. This is appropriate if little or no setup is required. I expect many leases to operate in this mode, although I expect many resources will operate in the other mode.
- The "allocate now, activate later" mode, which is not fully implemented yet. This will queue setup workers when the allocator exits. Overall, this will work very similarly to Harbormaster.
- This new structure makes it acceptable for blueprints to sleep as long as they want during resource allocation and lease acquisition, so long as they are not waiting on anything which needs to be completed by the queue. Putting a `sleep(15 * 60)` in your EC2Blueprint to wait for EC2 to bring a machine up will perform worse than using delayed activation, but won't deadlock the queue or block any locks.
Overall, this flow is more similar to Harbormaster's flow. Having consistency between Harbormaster's model and Drydock's model is good, and I think Harbormaster's model is also simply much better than Drydock's (what exists today in Drydock was implemented a long time ago, and we had more support and infrastructure by the time Harbormaster was implemented, as well as a more clearly defined problem).
The particular strength of Harbormaster is that objects always (or almost always, at least) have a single, clearly defined writer. Ensuring objects have only one writer prevents races and makes reasoning about everything easier.
Drydock does not currently have a clearly defined single writer, but this moves us in that direction. We'll probably need more primitives eventually to flesh this out, like Harbormaster's command queue for messaging objects which you can't write to.
This blueprint was originally implemented in D13843. This makes a few changes to the blueprint itself:
- A bunch of code from that (e.g., interfaces) doesn't exist yet.
- I let the blueprint have multiple services. This simplifies the code a little and seems like it costs us nothing.
This also removes `bin/drydock create-resource`, which no longer makes sense to expose. It won't get locking, leasing, etc., correct, and can not be made correct.
NOTE: This technically works but doesn't do anything useful yet.
Test Plan: Used `bin/drydock lease --type host` to acquire leases against these blueprints.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Subscribers: Mnkras
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14117
Summary:
Ref T9253. The Drydock allocator is very pseudocodey right now. Particularly, it was written before Blueprints were concrete.
Reorganize it to make its responsibilities and error handling behaviors more clear.
In particular, the Allocator does not manage locks. It's primarily trying to reject allocations which can not possibly work. Blueprints are responsible for locks. See some discussion in D10304.
NOTE: This code probably doesn't work as written, see future diffs.
Test Plan: See future diffs.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Subscribers: cburroughs
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14114
Summary:
Ref T9253. Some of the Drydock code is pretty old. This applies standard modernizations to it:
- Modernize Query classes to use stuff like `buildWhereClauseParts()` and `loadStandardPage()`.
- Modernize all the getX() / attachX() stuff. In particular:
- Require and attach implementations to Blueprints.
- Require and attach Blueprints to Resources.
- BlueprintImplementations are now always unique per-Blueprint so they can store/cache state if they want without running over one another.
- BlueprintImplementations are now passed a `$blueprint`, like other similar APIs (this could go various ways but I generally like this as a balance of concerns).
NOTE: This probably doesn't run on its own, I'm just trying to split the next diff (core allocator stuff) up a bit and these pieces are all pretty standard.
Test Plan:
- Not much; see next revision or two.
- Clicked around Resource and Blueprint lists.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14113
Summary:
Ref T9253. See discussion in D13843.
I want to let Drydock blueprints for Almanac services choose those services from a typeahead, but only list appropriate services in the typeahead. To do this:
- Provide a StandardCustomField for an arbitrary datasource.
- Adjust the AlmanacServiceDatasource to allow filtering by service class.
This implementation is substantially the same as the one in D13843, with some adjustments:
- I lifted most of the code in the `Users` standard custom field into a new `Tokenizer` standard custom field.
- The `Users` and `Datasource` custom fields now extend the `Tokenizer` custom field and can share most of the code it uses.
- I exposed this field fully as a configurable field. I don't think anyone will ever use it, but this generality costs us nearly nothing and improves consistency.
- The code in D13843 didn't actually pass the parameters over the wire, since the object that responds to the request is not the same object that renders the field. Use the "parameters" mechanism in datasources to get things passed over the wire.
Test Plan:
- Created a custom "users" field in Maniphest and made sure it still wokred.
- Created a custom "almanc services" field in Maniphest and selected some services for a task.
- With additional changes from D13843, selected an appropriate Almanac service in a new Drydock blueprint.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14111
Summary:
Ref T9253. This comes from a time before Almanac. Now that we have Almanac, it makes much more sense to put this logic there than to try to put it in Drydock itself.
Remove the preallocated host blueprint, a relic of a bygone time.
Test Plan: Grepped for callsites.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14110
Summary: Ref T9253. See D13843 for some discussion. This is very bare-bones for now since I believe that almost all interesting configuration (e.g., credentials) should live in Drydock, although I imagine it getting some configuration eventually.
Test Plan: Used {nav Almanac > Services > Create Service} to create a new service of this type.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14109
Summary:
Fixes T9446. We allow administrators to send "Welcome" mail to bots and mailing lists.
This is harmless (these links do not function), but confusing.
Instead, disable this option in the UI and explain why it is disabled when it is clicked. Also prevent generation of this mail lower in the stack.
Test Plan:
- Viewed a bot page, saw action disabled, clicked it, got explanation.
- Viewed a normal user page, saw action enabled, clicked it, sent welcome email.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9446
Differential Revision: https://secure.phabricator.com/D14134
Summary: These already have a larger font, the extra height isn't needed. Make them the same size as `td`
Test Plan: Look at a bunch of tables.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14135
