Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary:
When a PhabricatorTestCase dies after creating storage fixtures, it leaves
those storage fixtures around. This doesn't happen often, but when it does
happen it's a pain to cleanup. The --unittest-fixtures option helps automate
that cleanup.
Test Plan:
Ran it with --dryrun, then for real. Became overwhelmed with a Zen like peace
after regarding the tidiness and beauty of SHOW DATABASES.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3858
Summary: Make mobile-friendly and provide UI to cancel/retry tasks. Remove display of task data to arbitrary users, as it may be sensitive.
Test Plan:
{F22502}
{F22503}
{F22504}
{F22505}
{F22506}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3854
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Test Plan: Looked at diff with several different lint errors, saw correct messages in their inline comments.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3827
Summary: you can now add, edit, and delete status events. also added a "description" to status events and surface it in the big calendar view on mouse hover. some refactoring changes as well to make validation logic centralized within the storage class.
Test Plan: added, edited, deleted. yay.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T407
Differential Revision: https://secure.phabricator.com/D3810
Summary: Followup to D3804. Makes Diffusion main comments (not just inlines) render properly with the modern markup pipeline.
Test Plan: Created previews and inline previews. Edited inlines. Saved comment, viewed comment. Verified caches were read and written using "Services" tab.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3805
Summary:
See T1963 for discussion of the Facebook-specific hack.
Differential currently uses a one-stage cache (render -> postprocess -> save in cache) rather than the two-stage cache (render -> save in cache -> postprocess) offered by `PhabricatorMarkupInteface`. This breaks Differential comments coming out of cache for the lightbox, and makes various other things suboptimal (status of handles like @mentions and embeds are not displayed accurately).
Instead, use the modern stuff.
Test Plan:
- Created preview comments and inlines in Differential.
- Edited a Differential inline.
- Submitted main and inline Differential comments.
- Viewed and edited Differential summary and test plan.
- Created preview comments and inlines in Diffusion.
- Submitted comments and inlines in Diffusion.
- Verified Differential now loads and saves to the generalized markup cache (Diffusion is close, but main comments still hold a single-stage cache).
- Verified old Differential comments work correctly with the lightbox.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1963
Differential Revision: https://secure.phabricator.com/D3804
Summary:
Provides a simple way for policy-aware queries to pre-filter results without needing to maintain separate cursors, and fixes a bunch of filter-related edge cases.
- For reverse-paged cursor queries, we previously reversed each individual set of results. If the final result set is built out of multiple pages, it's in the wrong order overall, with each page in the correct order in sequence. Instead, reverse everything at the end. This also simplifies construction of queries.
- `AphrontCursorPagerView` would always render a "<< First" link when paging backward, even if we were on the first page of results.
- Add a filtering hook to let queries perform in-application pre-policy filtering as simply as possible (i.e., without maintaing their own cursors over the result sets).
Test Plan: Made feed randomly prefilter half the results, and paged forward and backward. Observed correct result ordering, pagination, and next/previous links.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3787
Summary:
images attached to maniphest tasks and mentioned in remarkup anywhere now invoke a lightbox control that lets the user page through all the images.
lightbox includes a download button, next / prev buttons, and if we're not at the tippy toppy of hte page an "X" or close button.
we also respond to left, right, and esc for navigating.
next time we should get non-images working in here...!
Test Plan:
played with maniphest - looks good
made comments with images. looks good.
made sure multiple image comments worked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Maniphest Tasks: T1896
Differential Revision: https://secure.phabricator.com/D3705
Summary: The property is called 'actor', not 'user'. Extend from Phobject to catch this class of error automatically. Upgrade a couple of getActor() to requireActor().
Test Plan: Created new users.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3776
Summary: I need this shortly and it seems like something we're likely to need more of in the future now that fixtures work.
Test Plan: Ran unit tests. Used this productively in an upcoming diff.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3775
Summary:
Q1 to Q4 is used for parts of the year.
Also unlink all `[A-Z]0.*`, we don't route them anymore.
Test Plan:
Q0
Q1
Q10
Reviewers: epriestley, pieter
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3781
Summary: See comments.
Test Plan: Uploaded a small image in Safari via drag-and-drop.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3771
Summary:
We don't support this and say so in the documentation, but can check explicitly.
https://github.com/facebook/phabricator/issues/148
Test Plan: Set base-uri to stuff with/without paths, verified setup caught mistakes and gave useful errors.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3768
Summary:
See comment.
This can reveal some pretty bad bugs but HPHP handles this correctly so we already know about them.
Test Plan:
Added `phlog()` to `__call()` and observed what is defined for each method (under PHP). Also:
class C {
function __call($name, $args) {
static $class;
if (!$class) {
$class = get_class($this);
}
return $class;
}
}
class D extends C {
}
class E extends C {
}
$d = new D;
$e = new E;
var_dump($d->x());
var_dump($e->x()); // Prints D under PHP!
See also D3754.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1261
Differential Revision: https://secure.phabricator.com/D3753
Summary:
Allow skins to serve arbitrary resources without needing to be mapped, so we can have a vibrant community of amateur skinners.
For "basic" skins, just put all the "css/" on the page always.
Includes an image to prove that works.
@vrana, pretty sure this has no impact outside of Phame but it does change Celerity so it might be to blame if there's any weirdness with static resources.
Test Plan:
{F21341}
{F21340}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3719
Summary: Restore summarization. Use the remarkup cache, and try to do it somewhat-intelligently (pick the first paragraph that looks like it's text).
Test Plan:
{F21323}
{F21324}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3715
Summary:
Two high-level things happening here:
- We no longer ever need to put meta-UI (content creation, editing, notices, etc.) on live blog views, since this is all in Phame now. I pulled this out.
- On the other hand, I pushed more routing/control logic into Skins and made the root skin a Controller instead of a View. This simplifies some of the code above skins, and the theory behind this is that it gives us greater flexibility to, e.g., put a glue layer between Phame and Wordpress templates or whatever else, and allows skins to handle routing and thus add pages like "About" or "Bio".
- I added a basic skin below the root skin which is more like the old root skin and has standard rendering hooks.
- "Ten Eleven" is a play on the popular (default?) Wordpress themes called "Twenty Ten", "Twenty Eleven" and "Twenty Twelve".
Test Plan: Viewed live blog and live posts. They aren't pretty, but they don't have extraneous resources.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3714
Summary: See discussion in D3722. Good catch -- I'd definitely say this is a bug.
Test Plan: Rendered two <div />s, one with mustcapture set to `true` and one to `false`. The first got `data-mustcapture`; the second did not.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3723
Summary: I think this is simpler and better than making them conditional. In properly configured installs this should have no impact (they already use a CDN URI). In not-quite-properly configured installs this will add a trivial, highly-compressible number of bytes to the source. In all cases we have less code.
Test Plan: Loaded some pages, everything worked.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3709
Summary:
This leaves the UI in a pretty rough state, but implements blog policy controls and queries, and 1:1 relationships between posts and blogs. Needs a bunch more cleanup but seemed like an okayish breaking point in terms of cohesiveness.
Posts have these rules:
- Drafts are visible only to the author.
- Published posts are visible to anyone who can see the blog they appear on.
- Posts are only editable by the author.
...so we don't need any special policy UI or state to accommodate these rules.
Posts may have no blog if they're grandfathered in or you write a post to a blog and then lose the ability to see the blog. This is the messiest edge case -- specifically:
- You write a post to blog A.
- You publish the post.
- I edit the "Visible To:" for blog A and set it to exclude you.
What we do in this case is let you see the post in "My Posts", but you can no longer see the blog and you'll see the post as not being part of a blog. We can maybe give you some UI to let you move it later or something.
Test Plan: Hit all (I think?) of the interfaces without issues. Definitely some UI problems still right now.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3694
Summary:
Adds "can view" and "can edit" policies to blogs. Replaces "bloggers" with "can join".
This doesn't fully remove "bloggers" because I didn't want this to get too crazy/huge.
Test Plan: Created, edited, deleted blogs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3693
Summary: Provide array() default so we don't foreach() over null in the case of a missing config (from @dctrwatson).
Test Plan: Will verify with @dctrwatson.
Reviewers: vrana, btrahan, dctrwatson
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3686
Summary: When we receive an email, figure out if any of the other tos and ccs are users. If they are, pass their phids through the stach as "exclude phids" and exclude them from getting the email.
Test Plan: used the various applications (audit, differential, maniphest) and noted emails were sent as expected.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin, vrana
Maniphest Tasks: T1676
Differential Revision: https://secure.phabricator.com/D3645
Summary:
Blames to D3659.
It's not that old (< 1 day) to fix it properly (add patch for dropping xhpast DB).
Test Plan:
$ arc unit src/applications/calendar/storage/__tests__/PhabricatorCalendarHolidayTestCase.php
Reviewers: btrahan, epriestley
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3670
Summary: ...and use 'em in the phame blog case.
Test Plan: viewed blog.phabricator.dev and it actually looked right!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3666
Summary:
We need to go slightly farther to stub reply handler functionality for Ponder in at least some configurations, where we rely on the presence of a unique random key to generate per-object or per-object+user reply addresses.
This should probably be formalized in an interface since it's currently pretty ad-hoc.
Test Plan:
- Made comments in Ponder under a per-user email configuration.
- Ran migration, verified mail keys were generated.
- Ran migration again (with --apply), verified existing questions were skipped.
- Created a new question, verified mail key generation.
Reviewers: pieter
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1873
Differential Revision: https://secure.phabricator.com/D3665
Summary:
It isn't deleted by `storage destroy`.
This should be a no-op on current storage because we execute `CREATE DATABASE IF NOT EXISTS`.
Test Plan:
$ bin/storage destroy --dryrun
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3659
Summary: For immutable objects, just use the ID as a cursor.
Test Plan:
- Analyzed commits from an empty cursor.
- Checked that cursor was good.
- Pulled some more commits.
- Analyzed commits again, verified it only hit the new ones.
- Verified the graph of "Count of CMIT" looked reasonable.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1866
Differential Revision: https://secure.phabricator.com/D3656
Summary:
Alternate proposal for D3635.
- Works better with small images.
- Produces a predictable thumbnail size.
- Somewhat reasonable output on 3000x10 images.
- Increase the size of Macro thumbnails to 240px.
Test Plan: {F20497}
Reviewers: vrana, chad
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3638
Summary:
Basic infrastructure for generalizing subscriptions/CCs for T1808, T1514 and T1663.
- Implement `PhabricatorSubscribableInterface` and you'll get a subscribe/unsubscribe button for free.
- If there are any auto-subscribed users (like the question author) you can specify them; this makes more sense for Tasks and Revisions than Ponder probably, but maybe the author should be auto-subscribed.
- Subscriptions are either "explicit" (the user clicked 'subscribe') or "implicit" (the user did something which causes them to become subscribed naturally). If a user unsubscribes, they'll no longer be added by implicit subscriptions. This may or may not be relevant to Ponder but is an existing Herald feature in Differential.
- Helper method on PhabricatorSubscribersQuery to load subscribers.
- This doesn't handle actually sending email, etc. I think that's all so application-specific that it doesn't belong here.
- Now seems to work.
Test Plan:
{F20552}
{F20553}
Reviewers: pieter, btrahan
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1663, T1514, T1808
Differential Revision: https://secure.phabricator.com/D3637
Summary: We never use this and almost certainly never will. It's been in Lisk for ~7 years but is a solution in search of a problem. It causes a conflict with any DAO that has a `version` column.
Test Plan: Browsed around, performed inserts and updates. Edited a Phriction document.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, leslie.chong
Differential Revision: https://secure.phabricator.com/D3625
Summary:
Fixes a TODO, and silences a warning introduced by D3601.
There are several cases where we load data like:
SELECT *, ... AS extraData FROM ...
...and then pass it to `loadAllFromArray()`. Currently, this causes us to set an `extraData` property on the object.
This idiom seems fairly useful and non-dangerous, so I made `loadFromArray()` just drop extra keys.
Since we hit this loop a potentially huge number of times (10,000+ for full Maniphest pages) I did some microoptimization. Lisk is hot enough that it's one of the few places where it's worthwhile (see D1291).
Test Plan: Loaded homepage, no longer got warnings about `viewerIsMember` from Project queries. Browsed ~10 apps, didn't see any issues.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3606
Summary:
I make this error quite often: I forget to declare a property I am writing to or I make a typo in it.
PHP implicitly creates a public property which I don't like.
I would much rather see a linter warning me against this than this runtime check but writing it is very difficult:
- We need to explore all parents of the class we are checking.
- It is even possible that children will declare that property but it's OK to treat this as error anyway.
- We can extend also builtin or external classes.
- It's somewhat doable for `$this` but even more complex for any `$obj` because we don't know the class of it.
This should catch significant part of these errors and I'm fine with that.
I don't plan escalating to exception because this error is not fatal and should not stop the application from working.
Test Plan: Loaded homepage, checked log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3601
Summary:
Calling `->setPHID()` or other common Lisk setters creates an implicit public property `$phid`.
I don't like implicit properties and I see them as errors.
Its public visibility also makes me nervous and is vulnerable to bypassing any setters we may create.
Test Plan: Loaded homepage, checked log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3600
Summary: this then enables people to create blog.theircompany.com. And for us, blog.phacility.com...!
Test Plan:
- created custom URIs of various goodness and verified the error messages were sensical.
- verified if "false" in configuration then custom uri stuff disappears
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3542
Summary: We want to allow a broader access to our installation but we need to check the request in that case.
Test Plan:
Created a simple `PhabricatorRequestChecker` returning a custom controller.
Verified that this controller is used when accessing any page.
Returned `null` from this checker and verified that all 209 Phabricator pages are accessible.
Reviewers: epriestley
Reviewed By: epriestley
CC: scottmac, aran, Korvin, btrahan
Differential Revision: https://secure.phabricator.com/D2488
Summary:
It happens to me quite often that I leave the window with revision (by closing it or by visiting a link from it).
When I return then the comment draft is there so I clowncopterize it but forget that I wanted to take some other action than Comment.
Test Plan: Selected "Add Reviewers", added some reviewers, closed the window, opened it - the action and reviewers were still there.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3530
Summary:
We have two troubles with this script:
# Our revisions and commits don't fit in the memory. (Our tasks do :-).)
# Reindexing revisions is slow.
Test Plan: Ran it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3483
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary:
- Renames `PhabricatorPolicyQuery` to `PhabricatorPolicyAwareQuery` (a query which respects policy settings).
- Introduces `PhabricatorPolicyQuery`, which loads available policies (e.g., "member of project X").
- Introduces `PhabricatorPolicy`, which describes a policy.
- Allows projects to be set as policies.
- Allows Paste policies to be edited.
- Covers crazy cases where you make projects depend on themselves or each other because you are a dastardly villan.
Test Plan: Set paste and project policies, including crazy policies like A -> B -> A, A -> A, etc.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3476
Summary: Add storage to Pastes for view policies.
Test Plan: Set policies on pastes, see next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3474
Summary: This is pretty spartan, but it does the job.
Test Plan:
Patch, update storage, add some comment
to your favorite question or answer.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin, starruler, syrneus, me.here, victorzarate7
Maniphest Tasks: T1645
Differential Revision: https://secure.phabricator.com/D3471
Summary:
I want to implement a `{P123}` rule to embed pastes, but we need viewers everywhere before it will work with privacy.
This is not exhaustive; many Remarkup callsites haven't been converted to `PhabricatorMarkupInterface` yet.
Test Plan: Looked at Maniphest, Differential, Diffusion, Phriction; added markup, made edits and hit previews.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3428
Summary:
I've replaced all `id(new PhabricatorObjectHandleData(...))->loadHandles()` by `$this->loadViewerHandles(...)`.
Lint caught one usage in a static method.
Test Plan: Displayed revision with sporadic author.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3432
Summary: Previously, the identification string was thrown at the server long before you were connected, I've moved this to the end of the motd raw, and now errthangz gud
Test Plan: Register an account for your bot to use, give your bot the correct nick and password, then watch
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3410
Summary:
Currently, CelerityController extends AphrontController, not PhabricatorController. (I think I imagined Celerity being somewhat stand-alone and didn't want to create a dependency.)
This creates a concrete problem if a static resource is missing, since we throw an exception, but the higher-level exception handlers depend on the User existing in order to show an appropriate response page. This is the only controller which doesn't extend PhabricatorController, and it doesn't seem worthwhile to make a weird edge case out of it.
Specific repro case is:
- Remove `externals/javelin/` (or forget to run `git submodule update --init`).
- Load a static resource.
- Get "[Rendering Exception] Argument 1 passed to PhabricatorMainMenuView::setUser() must be an instance of PhabricatorUser, null given, called in /services/apache/phabricator/phabricator/src/view/page/PhabricatorStandardPageView.php on line 435 and defined"
Test Plan:
- Followed above steps, no more fataling.
- Verified this is the only weird controller.
Reviewers: voldern, vrana, btrahan
Reviewed By: voldern
CC: aran
Differential Revision: https://secure.phabricator.com/D3389
Summary:
I like systems that just work. It is possible to store files larger than max_allowed_packet in MySQL and we shouldn't demand it.
It also fixes a problem when file was smaller than `storage.mysql-engine.max-size` but its escaped version was larger than `max_allowed_packet`.
Test Plan: Reduced the size to 5e4, uploaded 90 kB file, checked the queries in DarkConsole, downloaded the file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3392
Summary: In my haste, I forgot a trailing ?
Test Plan: Try both "Where is Derp?" and "Where in the world is Derp?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3387
Summary:
This does a few things:
- Allows you to flag pastes. This is straightforward.
- Allows Applications to register event listeners.
- Makes object action lists emit a 'didrenderactions' event, so other applications can add more actions. The Flags application injects its action in this way. This should generally make it much easier to add actions to objects when we add new applications, with less code duplication and better modularity. We have a really hacky version of this in Differential that I want to get rid of in lieu of this more general approach. I'm going to make object lists do the same thing, so any application can jump in and add stuff.
Test Plan: Flagged and unflagged pastes. Viewed home page, differential, flags list.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3377
Summary:
More and more relations are going under edges and I can't work with them from Relatives framework.
This doesn't have the nice transitive property of normal relatives (loading relative objects from relatives loads all of them at once) but I can add it when I need it.
I plan to use it in D3085 (after converting relationships to edges).
Test Plan:
$task = id(new ManiphestTask())
->loadOneWhere('phid = %s', $phid);
print_r($task->loadRelativeEdges(4));
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3344
Summary:
Currently, when a user runs "arc diff" and the diff exceeds PHP's 'post_max_size', they get a very confusing and irrelevant error about a missing Conduit session token. The reason for this is that 'post_max_size' doesn't build $_POST, so //all// the data is missing.
We try to detect this, but currently only do so effectively for specific file upload forms. Broaden the detection to cover all cases.
Previously, we ran into an issue where Firefox + HTML5 drag-and-drop uploads would get a false positive on this detection. I dug into this and added the Content-Type checks, which correctly handle that case.
Test Plan: With small and large 'post_max_size', ran small and large normal, HTML5 and multipart/form-data POST requests against Phabricator in Safari and Firefox. Got desired beahviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: tido, aran
Differential Revision: https://secure.phabricator.com/D3320
Summary: We use numbers here and I see no reason for strings.
Test Plan:
$ bin/storage upgrade
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3303
Summary: Added match to the novel statement: Where in the world is derp?
Test Plan: Say something like "Where in the world is CarmenSandiego?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3318
Summary:
See D3126, T1667, T1658. Prior to D3126, `phd` did not use MySQL directly. Now that it does, there are at least two specific problems (see inline comment).
In the long term, we should probably break this dependency and use Conduit. However, we don't currently have access to the daemon log ID and getting it is a mess (the overseer generates it), and I think I want to rewrite how all this works at some point anyway (the daemon calls are currently completely unauthenticated, which is silly -- we should move them to an authenticated channel at some point, I think).
Test Plan: Ran `phd stop` with a bad MySQL config against a non-running daemon, didn't get a query error.
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1667, T1658
Differential Revision: https://secure.phabricator.com/D3314
Summary: We need to open the envelope here.
Test Plan: Ran `bin/storage dump` without errors.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3315
Summary:
You can now embed countdowns in Remarkup! Not sure what it's
useful for, but there you have it.
Also I may have made a hash of the markup code; I don't really know what
I'm doing.
Test Plan: Make a new countdown, put `{C###}` in a Differential comment.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1053
Differential Revision: https://secure.phabricator.com/D3290
Summary: This is arguably a more useful view than listing all daemons.
Test Plan: Looked at list, only saw daemons that haven't exited
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3286
Summary:
Fact engines loading dependent objects are super slow because they load them one by one.
This diff put each page in a Lisk set allowing engines to use `loadRelatives()`.
It also introduces `clearSet()` method which is somewhat neccessary in PHP < 5.3 or with disabled cyclic [[ http://php.net/gc | GC ]].
Test Plan:
$iterator = new PhabricatorFactUpdateIterator(new DifferentialRevision());
foreach ($iterator as $revision) {
$diffs = $revision->loadRelatives(new DifferentialDiff(), 'revisionID');
echo memory_get_usage() . "\n";
}
Experienced not-steadily-increasing memory usage and much faster loading.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3247
Summary:
Currently, we're showing projets in reverse order (Z..A) because most cursor pagers go from high IDs to low IDs.
Allow sequence to be reversed; reverse it.
Also simplify some query/paging stuff.
Test Plan: Set page size to 1, paged back and forth.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3221
Summary:
- In ProjectQuery, always load the viewer's membership in the project because we need it to perform a CAN_VIEW test.
- Add storage for the view, edit and join policies.
- A user can always view a project if they are a member.
- A user can always join a project if they can edit it.
- Editing a project requires both "view" and "edit" permissions, and edit does not imply view.
- This has no effect on the application yet.
Test Plan: See next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3219
Summary:
- Allow PolicyQuery to require specific sets of capabilities other than "CAN_VIEW", like edit, etc. The default set is "view".
- Add some convenience methods to PolicyFilter to test for capabilities.
Test Plan: Viewed pastes, projects, etc. Used other stuff in future diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3212
Summary:
We currently cache all connections in LiskDAO so we can roll back transactions when fixtured unit tests complete.
Since we establish a new connection wrapper each time we establish a global lock, this cache currently grows without bound.
Instead, pool global lock connections so we never have more than the largest number of locks we've held open at once (in PullLocalDaemon, always 1).
Another way to solve this is probably to add an "onclose" callback to `AphrontDatabaseConnection` so that it can notify any caches that it been closed. However, we currently allow a connection to be later reopened (which seeems reasonable) so we'd need a callback for that too. This is much simpler, and this use case is unusual, so I'd like to wait for more use cases before pursing a more complicated fix.
Test Plan:
Ran this in a loop:
while (true) {
for ($ii = 0; $ii < 100; $ii++) {
$lock = PhabricatorGlobalLock::newLock('derp');
$lock->lock();
$lock->unlock();
}
$this->sleep(1);
}
Previously it leaked ~100KB/sec, now has stable memory usage.
Reviewers: vrana, nh, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1636
Differential Revision: https://secure.phabricator.com/D3239
Summary:
Ponder is similar in spirit to the Wiki tool, but uses a Q&A
format and up/downvotes to signal user sentiment. Popular
questions are moved to the top of the feed on a 5-minute
cycle based on age (younger is better) and vote count (higher
is better).
Pre-apologies for noob diff.
Test Plan:
- `./bin/phd list` Should include `PonderHeatDaemon`; phd launch it
if necessary.
- Navigate to /ponder/ ; observe sanity when adding questions,
voting on them, and adding answers.
- Confirm that questions and answers are linkable using Q5 / Q5#A5 formatted object links.
- Confirm that searching for Ponder Questions works using built-in
search.
Feedback on code / schema / whatever organization very welcome.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin, starruler
Differential Revision: https://secure.phabricator.com/D3136
Summary: Apparently I am not qualified to do basic math.
Test Plan: Unit test.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3218
Summary: See discussion in D3078 for why I've separated this. Pretty sure it's not quite ready yet -- I want to build a couple of things on it so we have a better idea of what we need (autoincrement ID? <factType, objectA, epoch> primary key? objectB column? valueZ?) and don't need to do a ton of schema patches.
Test Plan: Applied patches, ran D3078.
Reviewers: vrana, btrahan, majak
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1581, T1562
Differential Revision: https://secure.phabricator.com/D3088
Summary: I think this is simpler? Includes test cases.
Test Plan: Ran tests. Loaded /paste/.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3209
Summary: See title. Adds features needed for D3136.
Test Plan:
Observe sanity (or run D3136 in a sandbox
and observe that voting works).
Reviewers: epriestley
Reviewed By: epriestley
CC: gmarcotte, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3205
Summary:
A few goals here:
- Slightly simplify the Query classtree -- it's now linear: `Query` -> `OffsetPagedQuery` (adds offset/limit) -> `PolicyQuery` (adds policy filtering) -> `CursorPagedPolicyQuery` (adds cursors).
- Allow us to move from non-policy queries to policy queries without any backward compatibility breaks, e.g. Conduit methods which accept 'offset'.
- Separate the client limit ("limit") from the datafetch hint limit ("rawresultlimit") so we can make the heurstic smarter in the future if we want. Some discussion inline.
Test Plan: Expanded unit tests to cover offset behaviors.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3192
Summary:
- Commit detail view
- List of projects
- "edit" action which takes the user to a simple form where they can only add / remove projects.
- Integrated the project relationship into the commit search indexer
- fixed a bug from D790; it seems you must select the column if you're going to join against it later. Without this change searching for author or projectfails 100% for me.
Test Plan: added and removed projects. verified appropriate projects showed up in detail and edit view. searched for commits by project and found the ones I was supposed to...!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1614
Differential Revision: https://secure.phabricator.com/D3189
Summary:
- Store project members in edges.
- Migrate existing members to edge storage.
- Delete PhabricatorProjectAffiliation.
- I left the actual underlying data around just in case something goes wrong; we can delete it evenutally.
Test Plan:
- Ran migration.
- Created a new project.
- Joined and left a project.
- Added and removed project members.
- Manually called PhabricatorOwnersOwner::loadAffiliatedUserPHIDs() to verify its behavior.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3186
Summary:
I'm trying to make progress on the policy/visibility stuff since it's a blocker for Wikimedia.
First, I want to improve Projects so they can serve as policy groups (e.g., an object can have a visibility policy like "Visible to: members of project 'security'"). However, doing this without breaking anything or snowballing into a bigger change is a bit awkward because Projects are name-ordered and we have a Conduit API which does offset paging. Rather than breaking or rewriting this stuff, I want to just continue offset paging them for now.
So I'm going to make PhabricatorPolicyQuery extend PhabricatorOffsetPagedQuery, but can't currently since the `executeWithPager` methods would clash. These methods do different things anyway and are probably better with different names.
This also generally improves the names of these classes, since cursors are not necessarily IDs (in the feed case, they're "chronlogicalKeys", for example). I did leave some of the interals as "ID" since calling them "Cursor"s (e.g., `setAfterCursor()`) seemed a little wrong -- it should maybe be `setAfterCursorPosition()`. These APIs have very limited use and can easily be made more consistent later.
Test Plan: Browsed around various affected tools; any issues here should throw/fail in a loud/obvious way.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3177
Summary:
See T1602.
This is just the minimal functional patch; the scripts will continue
working because of the `DEFAULT ''`.
Test Plan:
Can't fully test this until I get more code working, but
nothing broke horribly yet.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3147
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- Adds a new "Applications" application.
- Builds an application list via application config instead of via hard-coding, so we can move toward better concepts of installing/uninstalling applications, etc.
- Applications indicate that they need attention with notice counts and brief status messages rathern than 50 giant tables of all sorts of app data.
I want to try replacing the home screen with this screen, pretty much. Not sure if this is totally crazy or not. What does everyone else think?
Test Plan: Will add screenshots.
Reviewers: btrahan, chad, vrana, alanh
Reviewed By: vrana
CC: aran, davidreuss, champo
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3129
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary: You need to use -- to separate arguments for phd and the daemon.
Test Plan: Ran with the extra --.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3106
Summary:
Some facts are aggregations of other facts. For example, we may compute how many times each macro is used in each object as a "raw fact":
Dnnn uses macro "psyduck" 6 times.
But we want to present this data in aggregate form, e.g. "order macros by popularity". We can do this at runtime and it probably won't be too awful a query, but we can also aggregate it cheaply:
Macro "psyduck" is used 3920 times across all objects.
...and then do a query like "select macros ordered by usage".
"Aggregate" facts support facts like this. The aggregate facts I've implemented are:
- Count of all objects.
- Count of objects of type X.
- Last time facts were updated.
These clearly fit the "aggregate" facts template well. I'm not 100% sure macros do. We can use this table to answer a question like "What are the most popular macros, ordered by use?" We can also use it to answer a question like "What are the most popular macros in the last 6 months?", if we build a specific fact for that. But we can't use it to answer a question like "What are the most popular macros between times X and Y?". Maybe that's important; maybe not.
This seems like a good fit for at least some types of facts.
I'll de-magic the keys a bit in the next diff.
Test Plan: Ran the engines and got some aggregated facts about other facts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3089
Summary:
Basic "Fact" application with some storage, part of a daemon, and a control binary.
= Goals =
The general idea is that we have various statistics we'd like to compute, like the frequency of image macros, reviewer responsiveness, task close rates, etc. Computing these on page load is expensive and messy. By building an ETL pipeline and running it in a daemon, we can precompute statistics and just pull them out of "stats" tables.
One way to do this is just to completely hard-code everything, e.g. have a daemon that runs every hour which issues a big-ass query and dumps results into a table per-fact or per fact-group. But this has a bunch of drawbacks: adding new stuff to the pipeline is a pain, various fact aggregators can't share much code, updates are slow and expensive, we can never build generic graphs on top of it, etc.
I'm hoping to build an ETL pipeline which is generic enough that we can use it for most things we're interested in without needing schema changes, and so that installs can use it also without needing schema changes, while still being specific enough that it's fast and we can build useful stuff on top of it. I'm not sure if this will actually work, but it would be cool if it does so I'm starting pretty generally and we'll see how far I get. I haven't built this exact sort of thing before so I might be way off.
I'm basing the whole thing on analyzing entire objects, not analyzing changes to objects. So each part of the pipeline is handed an object and told "analyze this", not handed a change. It pretty much deletes all the old data about that thing and then writes new data. I think this is simpler to implement and understand, and it protects us from all sorts of weird issues where we end up with some kind of garbage in the DB and have to wipe the whole thing.
= Facts =
The general idea is that we extract "facts" out of objects, and then the various view interfaces just report those facts. This change has on type of fact, a "raw fact", which is directly derived from an object. These facts are concerete and relate specifically to the object they are derived from. Some examples of such facts might be:
D123 has 9 comments.
D123 uses macro "psyduck" 15 times.
D123 adds 35 lines.
D123 has 5 files.
D123 has 1 object.
D123 has 1 object of type "DREV".
D123 was created at epoch timestamp 89812351235.
D123 was accepted by @alincoln at epoch timestamp 8397981839.
The fact storage looks like this:
<factType, objectPHID, objectA, valueX, valueY, epoch>
Currently, we supprot one optional secondary key (like a user PHID or macro PHID), two optional integer values, and an optional timestamp. We might add more later. Each fact type can use these fields if it wants. Some facts use them, others don't. For instance, this diff adds a "N:*" fact, which is just the count of total objects in the system. These facts just look like:
<"N:*", "PHID-xxxx-yyyy", ...>
...where all other fields are ignored. But some of the more complex facts might look like:
<"DREV:accept", "PHID-DREV-xxxx", "PHID-USER-yyyy", ..., ..., nnnn> # User 'yyyy' accepted at epoch 'nnnn'.
<"FILE:macro", "PHID-DREV-xxxx", "PHID-MACR-yyyy", 17, ..., ...> # Object 'xxxx' uses macro 'yyyy' 17 times.
Facts have no uniqueness constraints. For @vrana's reviewer responsiveness stuff, we can insert multiple rows for each reviewer, e.g.
<"DREV:reviewed", "PHID-DREV-xxxx", "PHID-USER-yyyy", nnnn, ..., mmmm> # User 'yyyy' reviewed revision 'xxxx' after 'nnnn' seconds at 'mmmm'.
The second value (valueY) is mostly because we need it if we sample anything (valueX = observed value, valueY = sample rate) but there might be other uses. We might need to add "objectB" at some point too -- currently we can't represent a fact like "User X used macro Y on revision Z", so it would be impossible to compute macro use rates //for a specific user// based on this schema. I think we can start here though and see how far we get.
= Aggregated Facts =
These aren't implemented yet, but the idea is that we can then take the "raw facts" and compute derived/aggregated/rollup facts based on the raw fact table. For example, the "count" fact can be aggregated to arrive at a count of all objects in the system. This stuff will live in a separate table which does have uniqueness constraints, and come in the next diff.
We might need some kind of time series facts too, not sure about that. I think most of our use cases today are covered by raw facts + aggregated facts.
Test Plan: Ran `bin/fact` commands and verified they seemed to do reasonable things.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, majak
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3078
Summary: PhutilBufferedIterator now implements all the nonspecific logic here.
Test Plan:
Created a test script like this:
$iterator = new LiskMigrationIterator(new DifferentialRevision());
$iterator->setPageSize(3);
foreach ($iterator as $key => $rev) {
echo "{$key}: ".$rev->getID()."\n";
}
Ran it and verified sensible iteration results.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3076
Summary: Also move the other tests up so they'll trigger when this stuff is touched.
Test Plan: liberate
Reviewers: nh, btrahan, vrana
Reviewed By: nh
CC: aran
Maniphest Tasks: T1283
Differential Revision: https://secure.phabricator.com/D3074
Summary:
Currently, we have this cumbersome `PhabricatorRepositoryCommitMessageDetailParser` hook. This is really old and outdated; I want to just use the Differential custom field parser. See T945 for a specific application.
However, it allows installs to override author/committer association. Instead, provide an event hook for doing this.
Test Plan: Added a listener, made every commit resolve to "turtle", parsed some commits, verified the events looked sane and they now correctly were all attributed to "turtle".
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1337
Differential Revision: https://secure.phabricator.com/D3040
Summary: Currently, MySQL/MySQLi connections store passwords in plain text on the object. Allow them to be stored in PhutilOpaqueEnvelopes instead. See D3053.
Test Plan: Loaded site.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3054
Summary: We pull "retries" and a doc link from PhabricatorEnv directly. Break these dependencies so the classes can move to libphutil.
Test Plan: Browsed site, triggered a schema exception and verified I still got the useful footer text.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1283
Differential Revision: https://secure.phabricator.com/D3053
Summary: Add an explicit close() method to connections and call it in GlobalLock.
Test Plan:
Wrote a script like this:
$lock = PhabricatorGlobalLock::newLock('test');
echo "LOCK";
$lock->lock();
sleep(10);
echo "UNLOCK";
$lock->unlock();
sleep(9999);
Using `SHOW FULL PROCESSLIST`, verified the connection closed after 10 seconds with both the "MySQL" and "MySQLi" implementations.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1470
Differential Revision: https://secure.phabricator.com/D3035
Summary: created a PhabricatorInlineCommentPreviewController so controllers in Diffusion and Differential respectively just have to handle the URI mapping and data loading like good little controllers.
Test Plan:
left inline comments on commits, deleted inline commits, submitted inline comments -- all worked well
did the same on some diffs
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1176
Differential Revision: https://secure.phabricator.com/D3034
Summary:
- Add edges for this relationship.
- Use edges to store this data.
- Migrate old data.
- Fix some warnings with generating feed stories about Aux and Edge transactions.
- Fix a task-task edge issue with "Create Subtask".
Test Plan:
- Migrated data, verified reivsions showed up.
- Attached and detached tasks to revisions and vice versa.
- Created a new revision with attached tasks.
- Created a subtask.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3018
Summary: Theses are sort of silly anyway since they should all have the actor in them rather than being sentence fragments, but make them work OK for English at least. See D3013.
Test Plan:
Ran:
echo pht('added %d dependencie(s): %s', 1, 'derp')."\n";
echo pht('added %d dependencie(s): %s', 2, 'derp, derp')."\n";
Got:
added dependency: derp
added dependencies: derp, derp
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3015
Summary:
blogs are collections of posts. a blog also has metadata like a name, description and "bloggers" that can edit the metadata of the blog and contribute posts.
changes include the post edit flow where bloggers can now select which blogs to publish to. also made various small tweaks throughout the UI to make things sensical and clean as the concept of blogs is introduced.
there's edges powering this stuff. bloggers <=> blogs and posts <=> blogs in particular.
Test Plan:
made blogs, deleted blogs, tried to make blogs with no bloggers. all went well.
verified ui to publish only showed up for public posts, published posts to blogs, un-published posts to blogs, re-published posts to blogs, deleted posts and verified they disappeared from blogs.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3003
Summary: See D3006. Move this data to the edge store.
Test Plan:
- Created dependencies, migrated, verified dependencies were preserved.
- Added new dependencies, they worked.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3007
Summary:
- Use edges to store "X depends on Y" information in Maniphest.
- Show both "Depends On" and "Dependent Tasks".
- Migrate all the old edges.
Test Plan:
- Added some relationships, migrated, verified they were preserved.
- Added some new valid relationships, verified tasks got updated with sensible transactions and sent reasonable emails.
- Tried to add a cycle, got an ugly but effective error.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3006
Summary: This should simplify a bunch of stuff in D3006 and D3003.
Test Plan: Will update D3006.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3010
Summary: See D3006, D3007. Make it easier to do migrations like that without holding all results in memory.
Test Plan:
Ran this code with an artificially small page size (2):
foreach (new LiskMigrationIterator(new DifferentialRevision()) as $rev) {
echo "Revision ".$rev->getID()."\n";
}
Verified each revision as loaded and processed.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D3008
'phd status' should have a stable result when invoked multiple times.
Automatically removing PID files for dead daemons every time 'phd status' is
invoked prevents tools from noticing that a daemon has died if something
happens to invoke 'phd status' before the tool looks. This affects Puppet
noticably, since it probably runs the status command every half hour.
'phd status' may be invoked by tools (such as puppet) which need to make
automated decisions about whether to start/restart the daemon. To enable this,
'phd status' now exits with 0 if all daemons are running, 1 if no daemons are
running, and 2 if some (but not all) daemons are running.
Summary:
Lisk currently behaves in two different ways if you call it like `load("cow")` (throws) versus `load(99999999)` (returns null), where neither ID exists.
This was intended to catch programming errors as distinct from missing data, but in practice the former is very rare and you have to handle the latter in most cases anyway. The case where you pass "0" is particularly confusing. See D2971 for an example.
On the balance, I think this ends up being far more confusing than helpful. Instead, just return NULL if we're sure there's no such object.
Test Plan: Reasoned about program behavior.
Reviewers: alanh, btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2977
Summary: http://www.networksorcery.com/enp/protocol/irc.htm
Test Plan: augment code with an additional debug line (phlog('hi');) so I can see my case was trigged and it will fall through. setup an ill-configured IRC server with ngircd. Configure an ircbot to connect to said ill-configured IRC server. verify ircbot connected to channel. verify in irc bot logs that debug line was invoked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1452
Differential Revision: https://secure.phabricator.com/D2962
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary:
- See D2945.
- Drop `cache` field from ManiphestTransaction.
- Render task descriptions and transactions through PhabricatorMarkupEngine.
- Also pull the list of macros more lazily.
Test Plan:
- Verified transactions and transaction preview work correctly and interact with cache correctly.
- Verified tasks descriptions and task preview work correctly.
- Verified we don't hit the imagemacro table when we're rendering everything from cache anymore.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2946
Summary:
The immediate issue this addresses is T1366, adding a rendering cache to Phriction. For wiki pages with code blocks especially, rerendering them each time is expensive.
The broader issue is that out markup caches aren't very good right now. They have three major problems:
**Problem 1: the data is stored in the wrong place.** We currently store remarkup caches on objects. This means we're always loading it and passing it around even when we don't need it, can't genericize cache management code (e.g., have one simple script to drop/GC caches), need to update authoritative rows to clear caches, and can't genericize rendering code since each object is different.
To solve this, I created a dedicated cache database that I plan to move all markup caches to use.
**Problem 2: time-variant rules break when cached.** Some rules like `**bold**` are time-invariant and always produce the same output, but some rules like `{Tnnn}` and `@username` are variant and may render differently (because a task was closed or a user is on vacation). Currently, we cache the raw output, so these time-variant rules get locked at whatever values they had when they were first rendered. This is the main reason Phriction doesn't have a cache right now -- I wanted `{Tnnn}` rules to reflect open/closed tasks.
To solve this, I split markup into a "preprocessing" phase (which does all the parsing and evaluates all time-invariant rules) and a "postprocessing" phase (which evaluates time-variant rules only). The preprocessing phase is most of the expense (and, notably, includes syntax highlighting) so this is nearly as good as caching the final output. I did most of the work here in D737 / D738, but we never moved to use it in Phabricator -- we currently just do the two operations serially in all cases.
This diff splits them apart and caches the output of preprocessing only, so we benefit from caching but also get accurate time-variant rendering.
**Problem 3: cache access isn't batched/pipelined optimally.** When we're rendering a list of markup blocks, we should be able to batch datafetching better than we do. D738 helped with this (fetching is batched within a single hunk of markup) and this improves batching on cache access. We could still do better here, but this is at least a step forward.
Also fixes a bug with generating a link in the Phriction history interface ($uri gets clobbered).
I'm using PHP serialization instead of JSON serialization because Remarkup does some stuff with non-ascii characters that might not survive JSON.
Test Plan:
- Created a Phriction document and verified that previews don't go to cache (no rows appear in the cache table).
- Verified that published documents come out of cache.
- Verified that caches generate/regenerate correctly, time-variant rules render properly and old documents hit the right caches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1366
Differential Revision: https://secure.phabricator.com/D2945
Summary:
Certain types of things we should be storing in edges (notably, Task X depends on Task Y) should always be acyclic. Allow `PhabricatorEdgeEditor` to enforce this, since we can't correctly enforce it outside of the editor without being vulnerable to races.
Each edge type can be marked acyclic. If an edge type is acyclic, we perform additional steps when writing new edges of that type:
- We acquire a global lock on the edge type before performing any reads or writes. This ensures we can't produce a cycle as a result of a race where two edits add edges which independently do not produce a cycle, but do produce a cycle when combined.
- After performing writes but before committing transactions, we load the edge graph for each acyclic type and verify that it is, in fact, acyclic. If we detect cycles, we abort the edit.
- When we're done, we release the edge type locks.
This is a relatively high-complexity change, but gives us a simple way to flag an edge type as acyclic in a robust way.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2940
Summary:
Currently, multiple unit tests that acquire global locks will interfere with each other. Namespace the locks so they don't.
(Possibly we should also rename this to PhabricatorStorageNamespaceLock or something since it's not really global any more, but that's kind of unwieldy...)
Test Plan: Acquired locks with --trace and verified they were namespaced properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2939
Summary:
In unit tests which use fixtures, we open transactions on every connection we establish. However, since we don't track connections that are established with "$force_new" (currently, only GlobalLock connections) we never close these transactions normally.
Instead of not tracking these connections, track them using unique keys so we'll never get a cache hit on them.
Test Plan: Built unit tests on top of this, had them stop dying from unclosed transactions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2938
Summary:
A later diff adds unit tests against edges, but we need real objects to connect with edges. Add some trivial objects to the Harbormaster database to compliment the similar HarbormasterScratchTable.
On its own, this does nothing interesting.
Test Plan: Built unit tests on this in a followup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1162
Differential Revision: https://secure.phabricator.com/D2937
Summary:
See discussion here:
https://secure.phabricator.com/chatlog/channel/%23phabricator/?at=21186
Basically, MySQL usually raises a good error if we exceed "max_allowed_packet":
EXCEPTION: (AphrontQueryException) #1153: Got a packet bigger than 'max_allowed_packet' bytes
But sometimes it gives us a #2006 instead. This is documented, at least:
>"With some clients, you may also get a Lost connection to MySQL server during query error if the communication packet is too large."
http://dev.mysql.com/doc/refman//5.5/en/packet-too-large.html
Try to improve the error message to point at this as a possible explanation.
Test Plan: Faked an error, had it throw, read exception message. See also chatlog.
Reviewers: btrahan, skrul
Reviewed By: skrul
CC: aran
Differential Revision: https://secure.phabricator.com/D2923
Summary: See D2924.
Test Plan: Ran locks with blocking timeouts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2925
Summary: See D2906. This just adds text so they render pretty.
Test Plan:
Got pretty emails and rendered transactions.
{F13706}
Reviewers: btrahan, davidreuss
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2907
Summary:
- See D2741.
- When EdgeEditor performs edits, emit events.
- Listen for Maniphest edge events and save the changes as transactions.
- Do all this in a reasonably generic way that won't take too much rewriting as we use edges more generally.
Test Plan: Attached and detached commits from tasks, saw reasonable-looking transactions spring into existence.
Reviewers: btrahan, davidreuss
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2906
Summary: Simplify FeedQuery by making it extend from PhabricatorIDPagedPolicyQuery
Test Plan: Looked at feed on home, projects, user profile, and called `feed.query`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2905
Summary: Implementation is a little crazy but this seems to work as advertised.
Test Plan: Acquired locks with "lock.php". Verified they held as long as the process reamined open and released properly on kill -9, ^C, etc.
Reviewers: nh, jungejason, vrana, btrahan, Girish, edward
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1400
Differential Revision: https://secure.phabricator.com/D2864
Summary: Related to D2873.
Test Plan: Specified it and verified that highlighting still works.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2874
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary: I tried also filling the column by empty space but this looks better.
Test Plan: Displayed a comment both with visible and hidden inlines.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1216
Differential Revision: https://secure.phabricator.com/D2789
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Test Plan:
Altered database.
Wrote a custom translation and selected it in preferences.
Verified that the text is custom translated.
Set language back to default.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2757
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
