Summary:
Ref T1049. Currently, the "add" dialog lets you select a build step type, but then immediately creates one. If you "cancel" from the edit screen, you end up with an empty (and almost certainly invalid) build step.
Instead, don't create the step until it's valid.
Test Plan: Add Step -> Pick Type -> Add Step -> Cancel no longer creates empty step.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8605
Summary:
Ref T1049. Allows external systems to send a message to a build target. The primary intended use case is:
- You make an HTTP request to Jenkins.
- The build goes into a "waiting" state.
- Later, Jenkins calls `harbormaster.sendmessage` to report that the target passed or failed.
- The build continues as appropriate.
This is deceptively complicated because:
- There are a lot of race concerns. We might get a message back from an external system before it even responds to the request we made. We want to make sure we process these messages no matter when we receive them.
- These messages need to be sent to a build target (vs a build or buildable) because we'll get into trouble with parallelization later on otherwise (Jenkins is told to do 3 builds; we can't tell which ones failed or what overall state is unless the message are sent to targets).
- I initially thought about implementing this as a separate "Wait for a response from an external system" build step. This gets a lot more complicated for users once we do parallelization, though. Particularly, in the case where you've told Jenkins to do 3 builds, the three "wait" steps need to know which target they're waiting for (and jenkins needs to know some unique identifier for each target). So this pretty much boils down to a more complicated, more error-prone version of using target PHIDs.
This makes the already-muddy Build UI a bit worse, but it needs a general clarity pass anyway (it's showing way too much uninteresting data, and should show a better summary of results instead).
Test Plan:
- This doesn't really do anything interesting yet.
- Used Conduit to send messages to build plans.
- Viewed the messages on the build screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8604
Summary: Ref T1049. Tweaks some of the UI and code to improve / clean it up a bit.
Test Plan: Ran build plans, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8603
Summary: Ref T1049. For consistency, rename these to "Harbormaster...".
Test Plan: Ran migration, ran builds, everything still works fine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8602
Summary: Ref T1049. D8588 already required custom code to change what it extends, so this is as good a time as we're going to get to move to more standard class name.
Test Plan: `arc liberate`; `arc lint`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8601
Summary:
Ref T1049. Fixes T4602. Moves all the funky field stuff to CustomField. Uses ApplicationTransactions to apply and record edits.
This makes "artifact" fields a little less nice (but still perfectly usable). With D8599, I think they're reasonable overall. We can improve this in the future.
All other field types are better (e.g., fixes weird bugs with "bool", fixes lots of weird behavior around required fields), and this gives us access to many new field types.
Test Plan:
Made a bunch of step edits. Here's an example:
{F133694}
Note that:
- "Required" fields work correctly.
- the transaction record is shown at the bottom of the page.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4602, T1049
Differential Revision: https://secure.phabricator.com/D8600
Summary:
Ref T1049. In Harbormaster, build steps may have various inputs (like a host they should run on) and outputs (like a reference to an uploaded file).
- Currently, inputs aren't defined anywhere (except implicitly at runtime).
- Instead, define inputs explicitly.
- Currently, outputs are defined in a way that loses information when misconfigured (the keys will collide).
- Instead, define inputs and outputs so they work whether a step is configured correctly or not.
- Currently, there's no simple way to see a step's inputs and outputs.
- Add some UI for this.
- Currently, reordering steps has some surprising side effects.
- Instead of invalidating steps after reordering them, validate them at display time and warn the user.
Test Plan:
{F133679}
{F133680}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8599
Summary: Ref T1049. This generally simplifies things. The steps which don't support variables generally don't make sense to support varaibles anyway.
Test Plan: Edited some steps.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8588
Summary:
Fixes T3202. This fixes a couple of workflow issues:
- Accepted Revision -> Request Review. Currently this stays "accepted" due to sticky rules being too aggressive, but should transition to "needs review".
- Accepted Revision -> Plan Changes -> Request Review. Currently this stays "accepted". I think this behavior is correct, and have retained it. (In this case, you don't update the revision, you just "undo" your plan changes.) You can "Request Review" again to get back to "Needs Review".
Then implements a "sticky accept" switch:
- When off, updates downgrade accepts.
- When off, "request review" always downgrades accepts.
Test Plan:
- Went through all (I think?) of the plan changes / request review / accept / update workflows, with sticky accept on and off.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3202
Differential Revision: https://secure.phabricator.com/D8614
Summary: Ref T4663. Ref T4659. Allows "date" fields to be filtered with range parameters.
Test Plan:
- Added a custom "date" field with "search".
- Populated some values.
- Searched for dates using new range filters.
- Combined date search with other searches.
- Ran other searches independently.
- Inspected the generated queries.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: shadowhand, epriestley
Maniphest Tasks: T4659, T4663
Differential Revision: https://secure.phabricator.com/D8598
Summary: Fixes T1812. Moves the internal configuration into public space and documents it.
Test Plan:
- Tried to set it to some invalid stuff.
- Set it to various valid things.
- Browsed around, changed statuses, filtered statuses, viewed statuses, merged duplictes, examined transaction record, created tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8585
Summary: Ref T1812. This still doesn't expose configuration to the user, but adds validation for it.
Test Plan: Added a pile of unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8584
Summary:
Fixes T4636. Currently, we copy fields from the diff to the revision during the external effect phase, but there's no guarantee that we persist the object after this phase.
(In practice, when Herald rules trigger they cause the object to persist on this install, which is why we don't see this issue.)
Instead, move the field copies to the internal phase, where persistence is guaranteed.
Also consolidate some of the diff loading.
Test Plan: Ran `arc diff`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: mbishopim3, epriestley
Maniphest Tasks: T4636
Differential Revision: https://secure.phabricator.com/D8610
Summary:
Request from @csilvers. When approving users, the primary email address is useful for administrators.
(This queue is only accessible by administrators, so this doesn't expose email information in general.)
Test Plan: {F132912}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: shadowhand, csilvers, epriestley
Differential Revision: https://secure.phabricator.com/D8589
Summary:
Ref T1812. I think integer constants are going to be confusing and error prone for users to interact with. For example, because we use 0-5, adding a second "open" status like "needs verification" without disrupting the existing statuses would require users to define a status with, e.g., constant `6`, but order it between constants `0` and `1`. And if they later remove statuses, they need to avoid reusing existing constants.
Instead, use more manageable string constants like "open", "resolved", etc.
We must migrate three tables:
- The task table itself, to update task status.
- The transaction table, to update historic status changes.
- The saved query table, to update saved queries which specify status sets.
Test Plan:
- Saved a query with complicated status filters.
- Ran migrations.
- Looked at the query, at existing tasks, and at task transactions.
- Forced migrations to run again to verify idempotentcy/safety.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8583
Summary: Ref T1812. Without actually exposing configuration, this moves all status information into a config-like chunk of data which can later be exposed to human editors.
Test Plan:
- Made a bunch of status changes.
- Merged duplicates.
- Created task.
- Viewed feed, transaction record, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8582
Summary: Ref T1812. These are a bit fluff and don't make too much sense to make configurable, at least for now.
Test Plan: Grepped for external callers.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8581
Summary: Ref T1812. This is mega gross but Facts is too far away to do this right for now.
Test Plan:
bleh gross
Looked at reports, saw same data as before.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8580
Summary: Ref T1812. Moves most specialized status handling into `ManiphestTaskStatus`. The only real missing case is reports.
Test Plan:
Browsed most of the affected interfaces. Changed task status:
{F132697}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8579
Summary: Fixes T4451. See also D8612.
Test Plan: Viewed panel and read text, saw it matched up with the new console.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4451
Differential Revision: https://secure.phabricator.com/D8613
Summary: See screenshot. This does look like an improvement to me.
Test Plan: {F133255}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley, chad
Differential Revision: https://secure.phabricator.com/D8597
Summary: Fixes T4665. The "attachable" logic was a little off after a recent change.
Test Plan: With and without a profile image, viewed a page.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4665
Differential Revision: https://secure.phabricator.com/D8594
Summary: This normalizes phui-list's hover color to {$blue} like action-list
Test Plan: View a diviner document
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, chad, avivey
Differential Revision: https://secure.phabricator.com/D8593
Summary: Update notes, important, and warnings to look different than codeblocks.
Test Plan: test in diviner and legalpad
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, chad, avivey
Differential Revision: https://secure.phabricator.com/D8592
Summary: We'll fatal a little later here when trying to call methods. 404 instead.
Test Plan: Visited `/calendar/event/edit/9999999/` or similar.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8591
Summary:
- Dialog pages currently have no titles or crumbs, and look shoddy. Add titles and crumbs.
- Dialog titles aren't always great for crumbs, add an optional "short title" for crumbs.
- `AphrontDialogResponse` is pure boilerplate. Allow controllers to just return a `DialogView` instead and get the same effect.
- Building dialogs requires a bit of boilerplate, and we generally construct them with no explicit `"action"`, which has some issues with T4593. Provide a convenience method to set the viewer and get a reasonable, explict submit URI.
Test Plan:
- Viewed dialog on its own.
- Viewed dialog as a dialog.
{F132353}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8577
Summary:
Fixes T4636. If a user manually deletes a "repository" setting from a revision, Herald attempts to resolve it. Instead, Herald should now just trust Differential. Generally, the new logic is:
- When diffs are created, figure out repository information.
- When revisions are updated, copy info from diffs.
- Everywhere else, just trust the revision field.
Test Plan:
- Created revisions.
- Used Herald to dry-run revisions before and after a manual edit to remove the repository setting.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4636
Differential Revision: https://secure.phabricator.com/D8576
Summary: Fixes T4400. Removes very, very old "PhabricatorObjectListView", which was only used here.
Test Plan: {F132249}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T4400
Differential Revision: https://secure.phabricator.com/D8574
Summary: Ref T4400. Also stops rendering "and 1 other" in subscriber lists, since it looks a bit silly in practice (we can just put the other subscriber there instead). Don't do the "and x others" until X is at least 2.
Test Plan: Viewed/clicked subscriber lists and transactions.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4400
Differential Revision: https://secure.phabricator.com/D8573
Summary: Ref T4400. Same deal as projects. Tweaked the CSS a touch to make it look better in these views.
Test Plan: Viewed /people/.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T4400
Differential Revision: https://secure.phabricator.com/D8571
Summary: This can be used to lock yourself out of an instance, so prevent web edits.
Test Plan: Loaded page, wasn't web-editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8572
Summary: Ref T4400. Adds `setImageURI()` for object card/items.
Test Plan:
{F132229}
Also tested mobile.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley, chad
Maniphest Tasks: T4400
Differential Revision: https://secure.phabricator.com/D8569
Summary: The "Cancel" button on the "Edit Credential" interface doesn't go back to the "View Credential" interface for existing credentials.
Test Plan: Clicked "Cancel" on both "create" and "edit" workflows.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8568
Summary: Fixes T4629. CCs added by Herald don't get added to the cached subscriber list. Just reload subscribers before sending mail to pick up effects.
Test Plan: Created an "always add X as CC" Herald rule for revisions, created a revision, saw them get initial mail.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: spicyj, epriestley
Maniphest Tasks: T4629
Differential Revision: https://secure.phabricator.com/D8565
Summary: Update the infrastructure and UI of the client list.
Test Plan: {F131570}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8563
Summary:
Updates this stuff a bit:
- Add a global create permission for OAuth applications. The primary goal is to reduce attack surface area by making it more difficult for an adversary to do anything which requires that they create and configure an OAuth application/client. Normal users shouldn't generally need to create applications, OAuth is complex, and doing things with user accounts is inherently somewhat administrative.
- Use normal policies to check create and edit permissions, now that we have infrastructure for it.
- Use modern UI kit.
Test Plan:
- Created a client.
- Edited a client.
- Tried to create a client as a non-admin.
- Tried to edit a client I don't own.
{F131511}
{F131512}
{F131513}
{F131514}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8562
Summary: This modernizes and simplifies OAuth client authorizations a bit, moving them to a settings panel similar to the "Sessions" panel.
Test Plan:
- Viewed authorizations.
- Revoked an authorization.
- Created a test authorization.
{F131196}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8561
Summary: Precedence here was mucked up.
Test Plan: Plan with no explicit "method" now defaults to POST correctly.
Reviewers: dctrwatson, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8559
Summary: Fixes T4408. I had to add a "status" to colum. I think we'll need this once we get fancier anyway but for now we have "active" and deleted.
Test Plan: deleted a column. noted reloaded workboard with all those tasks back in the default colun. loaded a task and saw the initial transaction had a "Disabled" icon next to the deleted workboard. also saw the new transaction back to the default column worked.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4408
Differential Revision: https://secure.phabricator.com/D8544
Summary:
After "reject; plan changes; request review", revisions go back to "needs revision". Instead, they should remain in "needs review" (the reviewers need to review comments on the "request review", in the normal case). Generally, "request reivew" should act a lot like "update", just not actually change the diff.
To accomplish this, downgrade reviewers on "request review" to "rejected older", just like we would on an update.
Test Plan: Did "reject; plan; request", revision ended in "needs review". Rejected it into "needs revision"; updated it into "needs review".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: dctrwatson, epriestley
Differential Revision: https://secure.phabricator.com/D8558
Summary:
Fixes T4637.
- We already allow you to order by this column but don't have a key on it. Add one.
- Expose UI for querying on ranges.
Test Plan:
- Ran some queries, got reasonable-looking results and no table scans.
Reviewers: btrahan, bigo
Reviewed By: bigo
Subscribers: bigo, epriestley
Maniphest Tasks: T4637
Differential Revision: https://secure.phabricator.com/D8557
