Summary: Ref T4284. This fixes at least one problem which can cause the observed behavior.
Test Plan:
- Before applying patch, used `PHABRICATOR_CREDENTIAL=PHID-CDTL-... bin/ssh-connect` + debugging prints to verify the keyfile was written and cleaned up normally.
- Destroyed the credental, verified the temporary file was not cleand up correctly.
- Applied patch, verified temporary file was not written and command exited with sensible error.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4284
Differential Revision: https://secure.phabricator.com/D10328
Summary: Clean up some arg handling stuff.
Test Plan: Used this while debugging.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10314
Summary: This was broken by rP5ac36e8 by a derpy typo.
Test Plan: Ran dry run against a revision with a a repository, saw the field fill in on the transcript.
Reviewers: nickz, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10326
Summary:
Additional audit states were made queryable for T5871.
Include them in Conduit's audit.query as well. In doing so corrects
references from "status-foo" to "audit-status-foo".
Depends on D10271
Test Plan: with an api, issues queries and got sensible results
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D10290
Summary:
Ref T5932. Ref T5936. This implements build generations in Harbormaster, which provides the infrastructure required to both show users the previous states of restarted builds and to allow users to forcefully abort builds (and their targets).
You can view previous generations of a build by adding `?g=<n>` to the URI, but this isn't exposed in the UI anywhere yet.
Test Plan: Ran a build plan with a Sleep step in it. Reconfigured it for various sleep times and viewed previous generations of the build after restarting it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5932, T5936
Differential Revision: https://secure.phabricator.com/D10321
Summary:
Resolves T5937. HTTPS redirects caused by `security.require-https` use a full scheme, domain and port in the URI. Consequently, this causes invocation of the new external redirect logic and prevents redirection from occurring properly when accessing the HTTP version of Phabricator that has `security.require-https` turned on.
I've also fixed the automatic slash redirection logic to add the external flag where appropriate.
Test Plan: Configured SSL on my local machine and turned on `security.require-https`. Observed the "Refusing to redirect" exception on master, while the redirect completed successfully with this patch.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5937
Differential Revision: https://secure.phabricator.com/D10318
Summary: Caught this with the new redirect validation logic. The `$return_uri` was being set as just `B123` which is not valid. Prefixing it with `/` (like is done in `HarbormasterBuildActionController` already) gives the correct result of reloading the buildable's page.
Test Plan: Restarted all builds on a buildable, saw the page reload correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10320
Summary:
Fixes T5912. When migrating files, we try to clean up the old data. However, this code isn't aware of reference counting, and unconditionally destroys the old data.
For example, if you migrate files `F1` and `F2` and they have the same data, we'll delete the shared data when we migrate `F1`. Then you'll get an error when you migrate `F2`.
Since this only affects duplicate files, it primarily hits default profile pictures, which are the most numerous duplicate files on most installs.
Test Plan:
- Verified that the theory was correct by uploading two copies of a file and migrating the first one, before applying the patch. The second one's data was nuked and it couldn't be migrated.
- Applied patch.
- Uploaded two copies of a new file, migrated the first one (no data deletion), migrated the second one (data correctly deleted).
- Uploaded two copies of another new file, `bin/remove destory'd` the first one (no data deletion), then did it to the second one (data correctly deleted).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5912
Differential Revision: https://secure.phabricator.com/D10312
Summary: Ref T5915. Make `bin/remove destroy` a bit more thorough, since Herald transcripts can have field information in them.
Test Plan: Used `bin/remove destroy` to nuke revisions, saw their transcripts vanish too.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5915
Differential Revision: https://secure.phabricator.com/D10306
Summary: Fixes T5915. Occasionally, users derp up and diff private key material. Adding a pre-write Herald phase enables configuration of a partial layer of protection that will reject these changes before they hit disk, provided they can be detected by, e.g., filename.
Test Plan:
- Added a rule with checks on every field, verified they looked fine in the transcript.
- Created some revisions to test those changes (I have a bunch of revision rules locally).
- Verified rejects don't write transcripts to the database.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5915
Differential Revision: https://secure.phabricator.com/D10305
Summary:
If daemon data is mangled, `bin/phd restart` will SIGINT process `0`, which kills it.
uh oh T.T so sad
Test Plan: Used `bin/phd start` to start daemons; removed PID information from one; saw `bin/phd stop` shut down cleanly and not kill itself.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: mholden, epriestley
Differential Revision: https://secure.phabricator.com/D10308
Summary: and for bonus, finesse some URIs a tad. Fixes T5922.
Test Plan: viewed F1 logged out and it worked! viewed the ugly URI for F1 and got redirected to the pretty URI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5922
Differential Revision: https://secure.phabricator.com/D10309
Summary: its not necessary. Fixes T5906
Test Plan: clicked "Login to Comment" and went straight to the login form, sans intermediary dialogue
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5906
Differential Revision: https://secure.phabricator.com/D10295
Summary: Fixes T5918.
Test Plan: Verified memes work again.
Reviewers: hach-que, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5918
Differential Revision: https://secure.phabricator.com/D10307
Summary: Ref T5894. We have a couple more similar cases. Make them all do a decision-based redirect for now.
Test Plan: Did "View Raw File" and such, and also made sure thumbnails still work.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5894
Differential Revision: https://secure.phabricator.com/D10301
Summary: Straightforward (this is the one object type we do let you delete from the web UI) implemetation of `PhabricatorDestructibleInterface`.
Test Plan: Used `bin/remove destroy` to destory several files. Used `--trace` to verify they wiped file data.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10300
Summary: This has never been enabled by default, and isn't safe. Remove it since people can use preallocated or EC2 hosts.
Test Plan: Removed it; didn't see it appear on the "Create Blueprint" page.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10287
Summary: Fixes T5894. This needs some improvement when we lay in real CDN stuff, but should get all the cases right for now.
Test Plan: Thumbnails work properly again.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5894
Differential Revision: https://secure.phabricator.com/D10299
Summary: Fixes T5798. We basically weren't using the caching mechanism. Also adds service calls for S3 stuff, and support for seeing a little info like you can for conduit.
Test Plan: uploaded a paste, looked at paste list - no s3 service calls. edited the paste, looked at paste list - no s3 service calls and edited content properly shown
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5798
Differential Revision: https://secure.phabricator.com/D10294
Summary: Fixes T5871. These queries get to use the actual column on the commit table since they are about the "aggregate" state of different audits.
Test Plan: issues queries and got sensible results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5871
Differential Revision: https://secure.phabricator.com/D10271
Summary:
Via HackerOne. Chrome (at least) interprets backslashes like forward slashes, so a redirect to "/\evil.com" is the same as a redirect to "//evil.com".
- Reject local URIs with backslashes (we never generate these).
- Fully-qualify all "Location:" redirects.
- Require external redirects to be marked explicitly.
Test Plan:
- Expanded existing test coverage.
- Verified that neither Diffusion nor Phriction can generate URIs with backslashes (they are escaped in Diffusion, and removed by slugging in Phriction).
- Logged in with Facebook (OAuth2 submits a form to the external site, and isn't affected) and Twitter (OAuth1 redirects, and is affected).
- Went through some local redirects (login, save-an-object).
- Verified file still work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10291
Summary: Ref T2787. This provides a purchase detail screen (which has nothing useful on it yet) and converts a bunch of PHIDs into slightly more useful links.
Test Plan: Browsed around my account.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10284
Summary: Fixes T5471.
Test Plan: Used `bin/remove destroy` to destroy a dashboard and a panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5471
Differential Revision: https://secure.phabricator.com/D10283
Summary: Ref T5891. This just modernizes infrastructure.
Test Plan: Viewed "All" and "Unread" notifications.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5891
Differential Revision: https://secure.phabricator.com/D10281
Summary:
Fixes T5140. When you ajax-edit a task and we send back a full-size card, we currently always put a drag grip on it.
If you clicked the "edit" thing from a priority-ordered list, this is appropriate. However, if you clicked it from some other type of list, it is not.
Pass the expected grippableness through the call.
Test Plan:
- Edited a task from a reorderable (priority-ordered) view, got grip.
- Edited a task from a nonreorderable (author-ordered) view, got no grip.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5140
Differential Revision: https://secure.phabricator.com/D10282
Summary:
Fixes T5885. This implements optional soft point limits for workboard columns, per traditional Kanban.
- Allow columns to have a point limit set.
- When a column has a point limit, show it in the header.
- If a column has too many points in it, show the column and point count in red.
@chad, this could probably use some design tweaks. In particular:
- I changed the color of "hidden" columns to avoid confusion with "overfull" columns. We might be able to find a better color.
- UI hints for overfull columns might need adjustment.
(After T4427, we'll let you sum some custom field instead of total number of tasks, which is why this is called "points" rather than "number of tasks".)
Test Plan:
{F190914}
Note that:
- "Pre-planning" has a limit, so it shows "4/12".
- "Planning" has a limit and is overfull, so it shows "5 / 4".
- Other columns do not have limits.
- "Post-planning" is a hidden column. This might be too muted now.
Transactions:
{F190915}
Error messages / edit screen:
{F190916}
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T5885
Differential Revision: https://secure.phabricator.com/D10276
Summary:
Ref T5885. See D10276.
Currently, ActionHeaders can only have minicons, and we don't use them anywhere and they probably don't make much sense in the product anymore.
Instead, allow them to have font icons. Remove minicons, which have no callsites and probably won't in the future.
Test Plan:
{F190925}
- Grepped for `minicons`.
- Grepped for `setHeaderIcon()`.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5885
Differential Revision: https://secure.phabricator.com/D10277
Summary: Fixes T5884. Macro images are no longer public on most installs. We could generate tokens for them, but this (using Conduit to pull the file data) is easier and more correct.
Test Plan: Logged a bot into IRC and had it spam part of a macro before being killed for flooding.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10274
Summary: Ref T5884. We migrated with "canCDN" and then had live writes with "cancdn". Move everything to "canCDN" for consistency.
Test Plan: Ran migration, verified DB only has "canCDN" afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10273
Summary:
Ref T992.
- Format text/HTML bodies explicitly in `bin/mail show-outbound`.
- Provide `bin/mail show-outbound --dump-html` so you can do something like `bin/mail show-outbound --dump-html > dump.html; open dump.html` to get a browser preview somewhat easily.
Test Plan: Ran `bin/mail show-outbound` with and without `--dump-html` flag.
Reviewers: talshiri, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D10272
Summary:
When enabled, this will show the full history of review comments in an
email-compatible threading-view.
Test Plan: Sending emails with the option on and off.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10146
Summary: Ref T4427. This always counts 1 task = 1 point. The tricky bit is making this update in JS.
Test Plan: {F190900}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D10275
Summary:
Added support for side-by-side HTML and plaintext email building.
We can control if the HTML stuff is sent by by a new config, metamta.html-emails
Test Plan:
Been running this in our deployment for a few months now.
====Well behaved clients====
- Gmail
- Mail.app
====Bad clients====
- [[ http://airmailapp.com/ | Airmail ]]. They confuse Gmail too, though.
====Need testing====
- Outlook (Windows + Mac)
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: webframp, taoqiping, chad, epriestley, Korvin
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D9375
Summary: Fixes T5575. Moves "All" links into title/header. Mark all read floats left, and connection status sits in footer. Also added hints to enable notifications (it's a cool feature).
Test Plan:
Tested locally both menus.
{F190630}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5575
Differential Revision: https://secure.phabricator.com/D10269
Summary: Fixes T5453.
Test Plan: made a remarkup comment that "Q1 is dumb and Q10 is awesome" and only Q10 was linked. changed the new setting to have the value " " and the Q1 also started linking.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5453
Differential Revision: https://secure.phabricator.com/D10270
Summary: Ref T5862. makes the exception work better
Test Plan: issued some queries from audit ui with and without repos - they worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10268
Summary: Fixes T5862. The Diffusion table uses `id` but all the other infrastructure uses `phid` so just do a quick load of the repositories to get the ids. Long term, we should re-key the table by phid I think.
Test Plan: made a query with a repository and got a proper result set
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10245
Summary: Should help with debugging. In the web UI there is now a link to "View Email". This uses the same debugging output that `./bin/mail show-outbound` uses. Fixes T5768. Code is very defensive as I think these tables may be truncated eventually?
Test Plan: viewed some emails and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5768
Differential Revision: https://secure.phabricator.com/D10244
Summary:
Fixes T5727. Updates the regexes to split on '-'. Also changes the editor such that tokens are updated by the larger search process. (Note this means we update this data more often then we need to - for every project transaction.)
Users will need to make an edit to a project -or- run `bin/search index "#project-tag"` to make this actually work.
Test Plan: Made "Frontend-Engineering", "Engineering", and "Backend-Enginering". They all showed up in the typeahead!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5727
Differential Revision: https://secure.phabricator.com/D10247
Summary: Fixes T5872. This won't show up in the initial email until T4896 is further along.
Test Plan:
```
RECIPIENTS
discoball (Disco Ball)
BODY
epriestley added a comment.
ffkn
USERS
epriestley (Author)
COMMIT
http://local.aphront.com:8080/rPOEMS165b6c54f487
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5872
Differential Revision: https://secure.phabricator.com/D10266
Summary:
Ref T5884. We migrated to add a `canCDN` flag, but the code looks for a `cancdn` flag.
If this fixes the issue, I'll migrate `cancdn` to `canCDN` in the next diff.
Test Plan: Viewed some files, including old files, and saw the cacheability I expected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10264
Summary: Fixes T4130. Adds a setup warning when ft_min_word_len is set to the default value.
Test Plan: Hit setup warning; resovled setup warning. Searched for "DOS".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4130
Differential Revision: https://secure.phabricator.com/D10259
Summary:
Fixes T3347. We can't really do this one as a config thing since we don't know if the user wants to use LDAP.
Instead, just give them a better message than they otherwise get when they try to install/configure/use LDAP.
Test Plan: Faked it and got a reasonable message.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3347
Differential Revision: https://secure.phabricator.com/D10260
Summary:
Fixes T2605.
- Add a setup warning about the stopword file.
- Provide a simpler stopword file.
Test Plan:
- Hit setup warning.
- Resolved it according to instructions.
- Added "various" to a task, then searched for it, found the task.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10258
Summary: Fixes T2101. When viewing an image change, show image dimensions, MIME type, and filesize.
Test Plan:
{F190189}
{F190190}
very utility
such wow
Reviewers: mailson, btrahan, chad
Reviewed By: chad
Subscribers: epriestley, Korvin, aran
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D5206
Summary: Fixes T4973. For `PhabricatorProjectInterface` objects, add a header to let clients do mail filtering.
Test Plan: Saw `X-Phabricator-Projects: <#goat_farm>` in outbound mail.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: rush898, epriestley
Maniphest Tasks: T4973
Differential Revision: https://secure.phabricator.com/D10256
Summary: Fixes T1922. When a story is about a primary object associated with projects, show those projects on the feed story.
Test Plan: {F190171}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1922
Differential Revision: https://secure.phabricator.com/D10255
Summary: Fixes T5579. Modern browsers aggressively autofill credentials, but at least Firefox still behaves slightly better with this flag. Hopefully other browsers will follow suit.
Test Plan: Browsed various interfaces, verifying that login interfaces allow autocomplete while non-login interfaces do not.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5579
Differential Revision: https://secure.phabricator.com/D10253
Summary: Fixes T5869. Ref T4896. This `setID()` method no longer exists.
Test Plan: (WARNING) This is a pain to reproduce locally so I'm just winging it. I'm 99% sure this ID is only used to generate an anchor link. This is a hack to start with, and T4896 will eventualy clean it up properly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896, T5869
Differential Revision: https://secure.phabricator.com/D10254
Summary: This prevents SSH from saving the host key into known_hosts; StrictHostKeyChecking only prevents it from prompting for unknown hosts, but it will still verify hosts against what it has previously saved.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10252
Summary:
Resolves T5831. This modifies the Drydock SSH interface to execute commands under Powershell when the target host platform is Windows. Powershell is far more featured than cmd.exe, and more closely resembles a UNIX shell.
Currently Powershell outputs stderr as an XML blob on a line, and while this code currently doesn't use that, it will allow us in the future (planned next week) to redirect that output to the stderr log instead of having it all merged in with stdout under cmd (where there is no way to distinguish it).
Test Plan:
Ran various native commands and PowerShell commands from a Harbormaster build, including things like:
```
Write-Host ("my test" + ${build.id})
```
and saw:
```
my test679
```
in the output.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5831
Differential Revision: https://secure.phabricator.com/D10248
Summary: Fixes T5769. Fixes T5861. Add mail tags for "unblock" and "column change".
Test Plan: Did unblocks and column changes, verified the mail got the right mailtags and recipient nondelivery flags.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861, T5769
Differential Revision: https://secure.phabricator.com/D10241
Summary:
Ref T5861. Ref T5769. If users don't care at all about something, allow them to ignore it.
We have some higher-volume notifications either built now (column changes) or coming (mentions) which users might reasonably want to ignore completely.
Test Plan:
Ignored some notifications, then took appropraite actions. Saw my user culled from the notification subscriber list.
{F189531}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5769, T5861
Differential Revision: https://secure.phabricator.com/D10240
Summary:
Ref T5861. Currently, mail tags are hard-coded; move them into applications. Each Editor defines its own tags.
This has zero impact on the UI or behavior.
Test Plan:
- Checked/unchecked some options, saved form.
- Swapped back to `master` and saw exactly the same values.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10238
Summary: Ref T5861. Adds an option to opt out of all notification email. We'll still send you password resets, email verifications, etc.
Test Plan:
{F189484}
- Added unit tests.
- With preference set to different things, tried to send myself mail. Mail respected preferences.
- Sent password reset email, which got through the preference.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: rush898, epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10237
Summary:
Ref T5861. These two options are complex, rarely useful, and not directly related to controlling what mail you receive.
Move them to a separate panel to make way for more stuff on the preferences panel. We'll probably add an "HTML" option to this new panel eventually, too.
Test Plan:
{F189474}
- Used both panels.
- Tested with multiplexing off.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10236
Summary:
Fixes T5185. The fundamental issue is that this `excludePHIDs` property was not saved, so the logic went like this:
- Generate `excludePHIDs` correctly.
- Pass `excludePHIDs` through the stack.
- Perform some other computations correctly.
- Queue the mail for the daemons, throwing it away. {icon bomb}
- Daemons process mail with empty `excludePHIDs` list.
Store it in the persistent properties array instead.
Also remove the "override self mail" thing, since it's only used by `bin/mail send-test` and suffers from the same issue. I think it's too useless to fix, since even if you get caught by it, `bin/mail` makes it clear why the message was dropped.
Test Plan:
Notable:
- `exclude` present in properties
- Exclusion reason under RECIPIENTS header
{P1229}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5185
Differential Revision: https://secure.phabricator.com/D10234
Summary:
Fixes T5456. We lost this logic in the transition to applicationtransactions.
When publishing a feed story, mark all of the object's projects as related, so the project filter in feed works.
Test Plan: Made a comment on a task associated with a project, saw the story in filtered feed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: timor, epriestley
Maniphest Tasks: T5456
Differential Revision: https://secure.phabricator.com/D10233
Summary:
Fixes T5233.
- The mail adapter API currently expects plain addresses (like `a@b.com`) in `addTos()`, and some adapters can not accept fancy verbose addresses (like `"name" <a@b.com>`).
- When we try to send error email, we pass the entire "From" header into the API. This is incorrect.
- Since it would be nice to make this just work in the future, fix it inside the API.
- Specifically, this is reached with: send email -> generates error -> we try to send you an email back -> we send it to your "From" -> some mailers choke on the fancy name if you have one.
Test Plan: Processed an errorneous email with a fancy "From", got a response error.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5233
Differential Revision: https://secure.phabricator.com/D10232
Summary: Ref T5817. This just fixes the markup in emails, the overall behavior still isn't great. I don't want to spend to much time on Ponder until it ends up somewhere nearer the top of the priority queue.
Test Plan: Viewed feed stories and emails, no stray/clearly-broken HTML.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5817
Differential Revision: https://secure.phabricator.com/D10231
Summary: Fixes T5859. This doesn't change much, but makes the transaction record a little more accurate and activates stuff like `#hashtags` and `{F123}` causing policy associations.
Test Plan: Used `bin/mail receive-test` and mail receiver script to send bug mail, saw hashtags imply projects.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5859
Differential Revision: https://secure.phabricator.com/D10229
Summary:
Fixes T5839. If a repository has been force pushed and garbage collected, we might have a ref cursor in the database which still points at the old commit (which no longer exists).
We'll then run a command like `git log <new hash> --not <old hash>` to figure out which commits are newly pushed, and this will bomb out because `<old hash>` is invalid.
Instead, validate all the `<old hash>` values before we try to make use of them.
Test Plan:
- Forced a repository into a bad state by mucking with the datbase, generating a reproducible failure similar to the one in T5839.
- Applied patch.
- `bin/repository update <callsign> --trace` filtered the bad commit and put the repository into the right state.
- Saw new commits recognized correctly.
- Ran `bin/repository update <callsign>` for a Mercurial and SVN repo as a sanity check.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5839
Differential Revision: https://secure.phabricator.com/D10226
Summary:
Fixes T5184. Fixes T5008. Three issues with stories/notifications about changing the status of tasks which block other tasks:
**Bad Feed Stories**
- Problem: Feed story rendering was confusing (T5184).
- Solution: fix it to provide context.
**Too Many Feed Stories**
- Problem: Feed gets a story for the original task's close ("a closed x"), and a story for each blocked task ("a closed x, a task blocking y").
- "Solution": Punt. These are redundant in the full feed but not in filtered feeds. Right solution is display-time aggregation. No users have really complained about this.
**Too Many Notifications**
- Problem: Users subscribed to both tasks get notified about the clsoe, and also about the unblocked task. These notifications are redundant.
- "Solution": Punt. This is easy to fix by silencing notifications for the sub-editor, but I'm worried it would be confusing. Users haven't complained. Display-time aggregation might be a better fix.
Test Plan: {F189463}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5008, T5184
Differential Revision: https://secure.phabricator.com/D10235
Summary: Ref T5819. Implements basic icon and color filtering for projects.
Test Plan: {F189350}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D10230
Summary:
Fixes T5855. Adds a `--graceful N` flag to `phd stop` and `phd restart`.
`phd` will send SIGINT, wait `N` seconds, SIGTERM, wait 15 seconds, and SIGKILL. By default, `N` is 15.
Test Plan:
- Ran `bin/phd debug ...` and used `^C` to interrupt daemons. Saw graceful shutdown behavior, and abrupt termination on multiple `^C`.
- Ran `bin/phd start`, `bin/phd stop` and `bin/phd restart` with `--graceful` set to various things, notably `0`. Saw graceful shutdowns on the CLI and in the web UI. With `0`, abrupt shutdowns.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5855
Differential Revision: https://secure.phabricator.com/D10228
Summary: Resolves T5836. This automatically releases artifacts when Harbormaster builds finish (either passing or failing). This allows Harbormaster to release the Drydock leases it has for hosts.
Test Plan: Tested it with a build plan that passes and fails; tested it with lots of builds running in parallel.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5836
Differential Revision: https://secure.phabricator.com/D10208
Summary: This allows timeouts to be specified on SSH connections that Drydock makes. Used in the EC2 allocator to poll for the SSH server starting.
Test Plan: Used in EC2 allocator diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10225
Summary:
Ref T1049. This keeps track of how long a build target takes to execute in Harbormaster and displays it in the build view page. I'm not sure whether "Started" is really that useful once the target has completed?
Also, I change the name of the time taken depending on whether or not the target has completed; if it's still in progress it's called "Elapsed" and if it's completed then it's "Duration". The primary reason for this is that "Duration" sounds like post tense, whereas "Elapsed" is current tense. I'm not sure whether this is okay or not?
Test Plan: Ran a Sleep build step and saw the target dates / times appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: talshiri, epriestley, Korvin
Maniphest Tasks: T5824, T1049
Differential Revision: https://secure.phabricator.com/D10174
Summary: To assist with {T5245}, I have added projects back into the lipsum maniphest generator with the edge infrastructure.
Test Plan: Run the lipsum script for PhabricatorManiphestTaskTestDataGenerator and make sure it generates project data.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10202
Summary: Fixes T5850. Also fixes some logic where the wrong preempting events could be attached during a bulk query.
Test Plan: Phrequent list now shows preemption-aware times.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5850
Differential Revision: https://secure.phabricator.com/D10223
Summary:
Fixes T5848.
- Disallow tracking negative time.
- Preserve note if there's an error with the time selection.
- Show start time and duration.
- Slightly better error messages.
Test Plan: Started and stopped time. Tried to select future/negative ranges.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5848
Differential Revision: https://secure.phabricator.com/D10218
Summary:
Via HackerOne. If a user adds an email address and typos it, entering `alinculne@gmailo.com`, and it happens to be a valid address which an evil user controls, the evil user can request a password reset and compromise the account.
This strains the imagination, but we can implement a better behavior cheaply.
- If an account has any verified addresses, only send to verified addresses.
- If an account has no verified addresses (e.g., is a new account), send to any address.
We've also received several reports about reset links not being destroyed as aggressively as researchers expect. While there's no specific scenario where this does any harm, revoke all outstanding reset tokens when a reset link is used to improve the signal/noise ratio of the reporting channel.
Test Plan:
- Tried to send a reset link to an unverified address on an account with a verified address (got new error).
- Tried to send a reset link to a verified adddress on an account with a verified address (got email).
- Tried to send a reset link to an invalid address (got old error).
- Tried to send a reset link to an unverified address on an account with only unverified addresses -- a new user (got email).
- Requested several reset links, used one, verified all the others were revoked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10206
Summary: Ref T2787. This is very basic and just helps me know that the data is inserting correctly.
Test Plan: {F187765}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10205
Summary:
- Fixes T5851. Currently, if a commit has `Fixes T123`, we generate an email with just that before generating the commit email. Don't send/publish transactions about a commit before it imports (this is a tiny bit hacky, but well-contained and I don't think it causes any problems).
- Fixes T4864. Currently, we try to parse Differential information even if Differential is not installed. Instead, do this only if Differential is installed.
- Fixes T5771. Currently, if we can't figure out who the committer/author of a commit is, we don't publish a `Fixes T123` transaction. Instead, fall back to acting as "Diffusion" if we can't find a better actor. Most of this diff expands the role of application actors. The existing application actors (Herald and Harbormaster) seem to be working well.
Test Plan:
- Pushed a commit with `Fixes T123` and verified it did not generate email directly. (The task half of the transaction still does, correctly.)
- Uninstalled Differential and pushed a commit, got a clean import instead of an exception.
- Commented out author/committer PHIDs and pushed stuff, saw a "Diffusion" actor.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5771, T4864, T5851
Differential Revision: https://secure.phabricator.com/D10221
Summary:
Fixes T5838.
- We currently try to use a `ConduitAPIMethod` object as a string.
- We then pass that string to the parent's `__construct()` method as `$message`.
Test Plan: Uninstalled Maniphest, then tried to execute `maniphest.createtask`. Got a useful exception message instead of an error during message construction.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5838
Differential Revision: https://secure.phabricator.com/D10211
Summary:
Fixes T5849. When a new file is created, we might have to actually write the data to a storage engine, or we might be able to just point at data which is already there.
Currently, these two paths handle `$params` with different code and mild behavioral differences. Instead, have them call the same code so they get the same behavior.
Test Plan:
- Uploaded the same file multiple times to home page.
- Uploaded the same file multiple times as profile picture.
- Generated files via Diffusion.
- All the files got the expected properties, whether they were reusing data or not.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5849
Differential Revision: https://secure.phabricator.com/D10216
Summary:
Ref T5685. Currently we just 403 on an invalid token, but we can be a little more helpful.
The issues here are:
- If we **do** redirect you on this page and something goes wrong, you might get stuck in a redirect loop.
- If we **don't** redirect you, copy/pasting the link to someone (or reloading the page) gives them a pretty confusing result, since the link doesn't work any more. Prior to this diff, they get a 403.
To mitigate this, do a little better than a bare 403: give them a link to auth and generate a new URI for the file.
If this is still confusing, the next best thing I can come up with is something like this:
- Put some modulous of the timestamp in the URI.
- If the current time is within 2 seconds of the generation time, show this dialog.
- Otherwise, redirect.
That seems like it would be okay, but I worry that "2" has to be small (so links you copy/paste -> chat -> click still work) and a small value means that a small amount of clock skew breaks things. We could use the database clock, but ehhh.
Other ideas:
- Put a hash of the remote IP in the URI, redirect if it doesn't match. Fails for companies behind a NAT gateway but should work in a lot of other cases.
- Just redirect always, there's no reason it should ever loop and browsers don't really do anything bad when there's a loop (they'll show an error after too many redirects).
I'm leaning toward letting this stabilize in the wild for a bit, then trying "always redirect".
Test Plan: {F188914}
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10215
Summary: Ref T5685. We've added a new `canCDN` flag to control whether or not files can be cached and delivered over a CDN. Show this flag in the UI.
Test Plan: Viewed several files, saw correct/expected UI values.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
Subscribers: epriestley
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10213
Summary: See D10189. We should never hit this anymore, so clean it up.
Test Plan:
- Reloaded a board, saw everything stay where it was before the change.
- Added a new task to the project, saw it show up in backlog.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10200
Summary: Fixes T5829. This stuff is old and busted, but keep it working for now.
Test Plan: No more fatal when there are recently closed tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5829
Differential Revision: https://secure.phabricator.com/D10201
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary: This slipped through the datasource modernization stuff.
Test Plan: Used search UI.
Reviewers: rush898, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10196
Summary:
Ref T5024, T4427, T5474, T5523. Instead of separate icons in the column header for "Create Task" and "Edit Column Settings", use a dropdown menu.
- T5024 will likely add a "View Standalone" option.
- T4427 needs header space to show a count.
- T5474 likely needs "Edit Triggers..." (this seems reasonable to separate from editing the name, etc.)
- T5523 likely adds "Move all tasks..." eventually.
Test Plan: {F187414}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5523, T5474, T5024, T4427
Differential Revision: https://secure.phabricator.com/D10190
Summary: Sets layout as flush when rendering diff table or timeline in a Dialog
Test Plan: Tested each
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10194
Summary: Fixes T5739. I only got D9857 half right: the new method names are correct, but the bodies needed to change too.
Test Plan: Signed a document as an anonymous user.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5739
Differential Revision: https://secure.phabricator.com/D10191
Summary:
Via the UI adding a mailinglist for CC works, but via
the API currently it shows:
>One or more PHIDs were invalid for ccPHIDS
This removes the user validation check for ccPHIDs.
(I left it in for other things like owner since that seems
still appropriate?)
Test Plan:
used arc locally to add a mailinglist to cc
```echo '{"id": 2, "ccPHIDs": ["PHID-MLST-ohduchbv4dfimk7opt3r"]}' | arc call-conduit maniphest.update```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10193
Summary:
Ref T4807. This is probably a complete fix, but I'd be surprised if there isn't a little cleanup I missed.
When users drag tasks on a "natural"-ordered workboard, leave things where they put them.
This isn't //too// bad since a lot of the existing work is completely reusable (e.g., we don't need any new JS).
Test Plan:
- Dragged a bunch of stuff around, it stayed where I put it after dropped and when reloaded.
- Dragged stuff across priorities, no zany priority changes (in "natural" mode).
- Created new tasks, they show up at the top.
- Tagged new tasks, they show up at the top of backlog.
- Swapped to "priority" mode and got sorting and the old priority-altering reordering.
- Added tasks in priority mode.
- Viewed task transactions for correctness/sanity.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10182
Summary:
Ref T4807. This is an alternative to D10179. The problem these diffs solve is that I want to be able to reorder a column's positions without having to load the actual objects, but that's difficutl because two positions may have the same sequence number (and I think it's good that we allow that, since it makes a bunch of other stuff way easier).
Instead of using the object ID (e.g., the task ID) to reorder positions with the same sequence, use the position itself. This is a little easier, is less ambiguous if columns eventually have several types of objects, and produces a better behavior when old objects are freshly added to a board. For example, if you tag `T300` with `#project`, this new rule will push it to the top of "Backlog" while the old rule might have buried it deep. I think this behavior is desirable and more "natural".
When creating a group of new rows, we do order the batch by ID, so a group of freshly-tagged objects float to the top togehter in ID order. This seems like the most natural rule, too.
Test Plan:
- Loaded some boards with implicit objects on them (freshly tagged tasks) and saw rows create.
- Verified new rows created in the right order.
- Dragged some tasks around.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10180
Summary:
Ref T4807. This doesn't actually do anything yet, but adds a dropdown menu for choosing an ordering and gets all the UI working correctly.
This also fixes a bug where column hidden state wouldn't persist across filter changes.
(I won't land this until it does something, but the next diff will probably be a mess so this seemed like a clean place to sever things.)
Test Plan:
{F187114}
- Altered sort ordering.
- Altered hidden state and filters, verified all states persisted correctly.
- Added `phlog()` to edit/create and move controllers and verified they receive sort information.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: swisspol, chad, epriestley
Maniphest Tasks: T4807
Differential Revision: https://secure.phabricator.com/D10178
Summary:
CanCDN flag indicates that a file can be served + cached
via anonymous content distribution networks.
Once D10054 lands, any files that lack the CanCDN flag
will require a one-time-use token and headers will
prohibit cache to protect sensitive files from
unauthorized access.
This diff separates the CanCDN changes from the code that
enforces these restrictions in D10054 so that the changes
can be tested and refined independently.
Test Plan: Work in progress
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: rush898, qgil, epriestley, aklapper, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10166
Summary: Fixes T5705. This was just derp; instead of returning the duration of the first slice, return the duration of all the slices.
Test Plan: Added unit tests. Saw reasonable results in the UI.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5705
Differential Revision: https://secure.phabricator.com/D10184
Summary: Fixes T5423, "is newly created" herald rule fails on dry runs
Test Plan: Create herald "is newly created" rule, and do a dry run on an existing pholio mock, differential commit, or maniphest task. Should not return an exception.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5423
Differential Revision: https://secure.phabricator.com/D10187
Summary:
Ref T5245. This removes some hacks and activates two meaningful interactions:
- The "projects" field goes through shared code now.
- Mentioning projects in tasks using hashtags now tags them.
Test Plan:
- Viewed a task with projects.
- Viewed a task with no projects.
- Viewed a task with projects and board positions.
- Viewed a revision with projects.
- Made a `#hashtag` comment in Maniphest and got a project association.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D10177
Summary: Ref T1049. This allows build steps to create URI artifacts, which can be used to link to external builds and other resources.
Test Plan: Used a build step in an external library to test the creation of a URI artifact and verified it appeared correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10173
Summary: Resolves T5814. Ref T1049. This changes "Stop" to "Pause" in the UI (internally it's still referred to as Stop).
Test Plan: Viewed builds and saw the intended wording.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049, T5814
Differential Revision: https://secure.phabricator.com/D10172
Summary: Use cutlery icon for hilarity. Ref T5768.
Test Plan: made something with remarkup in it, used 'view raw' and saw the remarkup raw in a nice little dialogue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5768
Differential Revision: https://secure.phabricator.com/D10183
Summary: Fixes T5478. For "personal" installs use the person icon; for global use the global icon. For both providing explanatory tooltip text about what's going on. This will need to be updated if / when we start installing dashboards to other applications. Also, this query isn't 100% optimized but the major part *is* so I think its okay.
Test Plan: Installed a dashboard for personal use and verified correct icon / text showed up. Did the same for global installed dashboard...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5478
Differential Revision: https://secure.phabricator.com/D10181
Summary:
This is pretty basic allowing a user to set the
policy as a valid string ('no-one' or 'users') or
as a valid PHID. Without an explicit policy
a permissive one is set.
Test Plan:
Tested using the python-phabricator module (very basic api wrapper).
The arc cli syntax was evading me.
```import base64
from phabricator import Phabricator
phab = Phabricator()
with open('mypic.jpg') as f:
encoded = base64.b64encode(f.read())
//set no-one as viewer which really means author only?
phab.file.upload(name='mypicnoone.jpg',
data_base64=encoded,
viewPolicy='no-one')
//set a specific phid as policy in this case a project
phab.file.upload(name='mypicphid.jpg',
data_base64=encoded,
viewPolicy='PHID-PROJ-fgvvnafmhvkgn2d5a4rf')
//no set policy ends up as 'users' i.e. ('all users')
phab.file.upload(name='mypicdefault.jpg', data_base64=encoded)```
Not able to really test canCDN attribute but it should be
fine and I tried to make it all consistent with D10166
Reviewers: 20after4, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: 20after4, epriestley, Korvin
Maniphest Tasks: T5685
Differential Revision: https://secure.phabricator.com/D10164
Summary: Minor correction to correct spelling of alternate (the 'n' was missing).
Test Plan: reviewer to verify correct spelling
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10175
Summary: Fixes T5735, setting up Phacility for huge financial success.
Test Plan:
opened up Safari - who logs in with Safari anyway? - and could still view a macro
could also view the list of macros
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5735
Differential Revision: https://secure.phabricator.com/D10170
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary: so you can see who the event is about...! Fixes T5621.
Test Plan: saw the creator of each event on /calendar/event/query/all/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5621
Differential Revision: https://secure.phabricator.com/D10169
Summary: Fixes T5773.
Test Plan: Made a poll and voted on it. Deleted it via ./bin/remove destory V1. No errors and the poll is gone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5773
Differential Revision: https://secure.phabricator.com/D10167
Summary: this data is a little weird since its user-entered and we need to put it in a web page un-escaped for the font to load correctly. Ergo, we use a regex to make the input safe / sane, and said regex needs to support a '.'. Fixes T5810.
Test Plan: added Fixedsys Excelsior 3.01 to my system and was able to set my preference and get the new font
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: dereckson, epriestley, Korvin
Maniphest Tasks: T5810
Differential Revision: https://secure.phabricator.com/D10163
Summary: This moves artifacts and build target messages into tabs.
Test Plan: Viewed build plan, saw the tabs appear when the steps had appropriate artifacts and / or messages.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10161
Summary: This automatically hides any empty build logs from Harbormaster, so that they do not appear.
Test Plan: Viewed a build plan where the logs were empty and didn't see them appear.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10091
Summary: Currently, we just create a default "backlog" column if / when you visit a workboard for the first time. Post this patch, instead you see a blocking dialog that lets you either create the default backlog column or import columns from another project. In the case of the latter, the user gets another dialog which lets them select any project of which they are a member that also has columns in it. Note that only not hidden columns get imported. Fixes T4431.
Test Plan:
- made a new workboard and got my new dialog. made a default backlog and it worked!
- made a new workboard again and tried the import flow - it also worked.
- verified projects with no columns do not show up in import dialog
- verified project with / without columns still all show up in maniphest project typeahead
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4431
Differential Revision: https://secure.phabricator.com/D10153
Summary: Ref T4896. This was used by the old audit comment storage, which is now defunct.
Test Plan: Grepped for callsites in the codebase.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10152
Summary:
Fixes T5728. In particular:
- `/tag/XYZ/` now works as an alias for `/tag/xyz/`.
- `arc todo --project ASDF` now works as an alias for `arc todo --project asdf`.
Test Plan: Called `project.query` and visited `/tag/LBHABLHBH/`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aklapper, epriestley
Maniphest Tasks: T5728
Differential Revision: https://secure.phabricator.com/D10144
Summary: Fixes T5510. This purely reduces false positives from HackerOne: we currently rotate CSRF tokens, but do not bind them explicitly to specific sessions. Doing so has no real security benefit and may make some session rotation changes more difficult down the line, but researchers routinely report it. Just conform to expectations since the expected behavior isn't bad and this is less work for us than dealing with false positives.
Test Plan:
- With two browsers logged in under the same user, verified I was issued different CSRF tokens.
- Verified the token from one browser did not work in the other browser's session.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5510
Differential Revision: https://secure.phabricator.com/D10136
Summary:
Fixes T5509. Currently, existing sessions live on even if you change your password.
Over the course of the program, we've recieved a lot of HackerOne reports that sessions do not terminate when users change their passwords. I hold that this isn't a security vulnerability: users can explicitly manage sessions, and this is more general and more powerful than tying session termination to password resets. In particular, many installs do not use a password provider at all (and no researcher has reported this in a general, application-aware way that discusses multiple authentication providers).
That said, dealing with these false positives is vaguely time consuming, and the "expected" behavior isn't bad for users, so just align behavior with researcher expectations: when passwords are changed, providers are removed, or multi-factor authentication is added to an account, terminate all other active login sessions.
Test Plan:
- Using two browsers, established multiple login sessions.
- In one browser, changed account password. Saw session terminate and logout in the second browser.
- In one browser, removed an authentication provider. Saw session terminate and logout in the second browser.
- In one browser, added MFA. Saw session terminate and logout in the second browser.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5509
Differential Revision: https://secure.phabricator.com/D10135
Summary:
Fixes T5506. Depends on D10133. When users remove an email address or change their primary email address, invalidate any outstanding password reset links.
This is a very small security risk, but the current behavior is somewhat surprising, and an attacker could sit on a reset link for up to 24 hours and then use it to re-compromise an account.
Test Plan:
- Changed primary address and removed addreses.
- Verified these actions invalidated outstanding one-time login temporary tokens.
- Tried to use revoked reset links.
- Revoked normally from new UI panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10134
Summary:
Ref T5506. This makes it easier to understand and manage temporary tokens.
Eventually this could be more user-friendly, since it's relatively difficult to understand what this screen means. My short-term goal is just to make the next change easier to implement and test.
The next diff will close a small security weakness: if you change your email address, password reset links which were sent to the old address are still valid. Although an attacker would need substantial access to exploit this (essentially, it would just make it easier for them to re-compromise an already compromised account), it's a bit surprising. In the next diff, email address changes will invalidate outstanding password reset links.
Test Plan:
- Viewed outstanding tokens.
- Added tokens to the list by making "Forgot your password?" requests.
- Revoked tokens individually.
- Revoked all tokens.
- Tried to use a revoked token.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10133
Summary:
Ref T4896. Now that we have a transaction editor, we can delete a giant block of hacks.
I believe this also resolves the commit/task attachment issues @joshuaspence and @mbishopim3 mentioned.
Test Plan: Attached and detached commits and tasks.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: mbishopim3, epriestley, joshuaspence
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10138
Summary: Ref T4896. I got this logic slightly wrong when porting it over: we always want to write this relationship, to allow members of a project with an audit request against a commit to resign and get it out of their queue.
Test Plan:
- Resigned from a commit with an existing relationship.
- Resigned from a commit with no existing relationship, saw one added.
Reviewers: btrahan, joshuaspence, mbishopim3
Reviewed By: mbishopim3
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10137
Summary:
Ref T4589. We don't recognize task descriptions as remarkup blocks, so `{F...}` references in them do not get attached to the objects, and thus no policy exemption is created.
Recognize them, which activates `{F...}` and `@mentions`.
We probably have a few more of these in other applications, but it's not a big deal to clean them up as they arise.
Test Plan: Uploaded a file to a task in the description field, saw it attach and get a policy exemption.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10139
Summary:
Ref T4589. When you look at a file, we load attached objects in order to run the "you can see this if you can see any attached object" policy check.
However, right now the subquery inherits the "throw on filter" flag from the parent query. This inheritance makes sense in other cases[1], but because this is an "ANY" rule it does not make sense here. In practice, it means that if the file is attached to several objects, and any of them gets filtered, you can not see the file.
Instead, explicitly drop the flag for this subquery.
[1] Sort of. It doesn't produce wrong results in other cases, but now that I think about it might produce a less-tailored error than it could. I'll look into this the next time I'm poking around.
Test Plan:
- Viewed an "All Users" file attached to a private Mock.
- Prior to this patch, I incorrectly received an exception when the Mock was loaded. This is wrong; I should be able to see the file because the policy is "All Users".
- After the patch, I can correctly view the file, just not the associated mock.
{F127074}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: 20after4, aran, epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D8498
Summary:
Fixes T4589. This implements much better policy behavior for files that aligns with user expectations.
Currently, all files have permissive visibility.
The new behavior is:
- Files uploaded via drag-and-drop to the home page or file upload page get permissive visibility, for ease of quickly sharing things like screenshots.
- Files uploaded via the manual file upload control get permissive visibility by default, but the user can select the policy they want at upload time in an explicit/obvious way.
- Files uploaded via drag-and-drop anywhere else (e.g., comments or Pholio) get restricted visibility (only the uploader).
- When the user applies a transaction to the object which uses the file, we attach the file to the object and punch a hole through the policies: if you can see the object, you can see the file.
- This rule requires things to use ApplicationTransactions, which is why this took so long to fix.
- The "attach stuff to the object" code has been in place for a long time and works correctly.
I'll land D8498 after this lands, too.
Test Plan:
- Uploaded via global homepage upload and file drag-and-drop upload, saw permissive visibility.
- Uploaded via comment area, saw restricted visibility.
- After commenting, verified links were established and the file became visible to users who could see the attached object.
- Verified Pholio (which is a bit of a special case) correctly attaches images.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10131
Summary: Ref T4589. Depends on D10129. In addition to letting users change the visibility policy for files, also allow them to choose a policy explicitly when a file is uploaded.
Test Plan: Uploaded several files using the plain old uploader, saw appropriate visibility policies applied.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10130
Summary: Ref T4589. Allow users to adjust visibility settings on files explicitly. This makes it easier to understand and manage upcoming changes in T4589.
Test Plan: Changed the view policy for a file several times.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D10129
Summary: Ref T4896. This converts the last "CommentEditor" to a transaction editor and removes a large part of the old code.
Test Plan:
- Added comments.
- Accepted / added auditors.
- Added inline comments.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10128
Summary: Ref T4896. Invoke the new editor directly instead of in a roundabout way when handling Audit email.
Test Plan: Used `bin/mail receive-test` to simulate mail, saw comment post with proper content source.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10127
Summary: Ref T4896. Use the new transaction-oriented `PhabricatorAuditEditor` directly instead of invoking it via the old editor.
Test Plan: Used Conduit to add a comment, use silent mode, and accept a commit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10126
Summary: Ref T4896. Applies these actions using new transaction stuff.
Test Plan:
- Accepted and raised concern with my own commit, verifying the special project/package behavior.
- Accepted and raised concern with another author's commit, verifying the authority-over-packages/projects behavior.
- Accepted a commit I was not affiliated wiht, verifying the "join as an auditor" behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10125
Summary: Ref T4896. Hook these up with new stuff.
Test Plan:
- Closed an audit.
- Resigned from an audit.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10124
Summary:
Ref T4896. Move the write for "Add Auditors" inside the new Editor.
There are no longer any readers or writers for metadata, so remove the calls for it.
Test Plan: Added auditors from the web UI.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10123
Summary:
Resolves T4659. This implements support for sorting tasks by custom fields.
Some of this feels hacky in the way it's hooked up to the Maniphest search engine and task query.
Test Plan: Queryed on a custom date field, with a small page size, and moved back and forth through the result set.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4659
Differential Revision: https://secure.phabricator.com/D10106
Summary: This class was renamed in D9991 but the filename is incorrect.
Test Plan: Eyeball it
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10118
Summary: Ref T4896. Instead of using custom stuff, use standard stuff.
Test Plan: Viewed a bunch of feed stories and published some over the Asana bridge.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10114
