Summary:
Ref T2787. Builds on D10649 by rebining existing objects (carts, charges, etc) to merchantPHIDs and providerPHIDs instead of an implicit global merchant and weird global artifacts (providerType / providerKey).
Basically:
- When you create something that users can pay for, you specify a merchant to control where the payment goes.
- Accounts are install-wide, but payment methods are bound to merchants. This seems to do a reasonable job of balancing usability and technical concerns.
- Replace a bunch of weird links between objects with standard PHIDs.
- Improve "add payment method" flow.
Test Plan: Went through the Fund flow with Stripe and WePay, funding an initiative.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10652
Summary:
Ref T2787. Instead of making providers global configuration, make them a thing on merchants with web configuration.
Payment methods and some of the pyament workflow needs to be retooled a bit after this, but this seemed like a reasonable cutoff point for this diff.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10649
Summary:
Ref T2787. Currently, you add payment providers (Stripe, Paypal, etc) in global configuration.
Generally, this approach is cumbersome, limiting, and often hard for users to figure out. It also doesn't provide a natural way to segment payment receivers or provide web access to administrative payment functions like issuing refunds, canceling orders, etc. I think that stuff definitely needs to be in the web UI, and the rule for access to it can't reasonably just be "all administrators" in a lot of reasonable cases.
The only real advantage is that it prevents an attacker from adjusting settings and pointing something at an account they control. But this attack can be mitigated through notifications, some sort of CLI-only merchant lock, payment accounts being relatively identifiable, etc.
So introduce "merchants", which are basically payable entities. An individual merchant will have attached Paypal, Stripe, etc., accounts, and access rules. When you buy something in an application, the merchant to pay is also specified. They also provide an umbrella for dealing with permissions down the line.
This may get a //little// cumbersome because if there are several merchants your saved card information is not shared across them. I think that will be fine in the normal case (most installs will have only one merchant). Even if it isn't and we leave providers global, I think introducing this is the right call from a web UI / permissions point of view. I'll play around with it in the next couple of diffs and figure out exactly where the line goes.
Test Plan: Listed, created, edited, viewed merchants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10648
Summary: Ref T2787. Similar to D10634, give applications more control over the cart workflow. For now this just means they get to pick exit URIs, but in the future they can manage more details of cart behavior.
Test Plan: Funded an initiative and got returned to the initiative instead of dead-ending in Phortune.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10638
Summary: Ref T2787. `Product` is currently a fairly heavy object, but as Phortune develops it makes a lot of sense to make it a lighter object and put more product logic in applications. Convert it into a fairly lightweight reference to applications. The idea is that Phortune is mostly providing a cart flow, and applications manage the details of products.
Test Plan: Funded an initiative for $1.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10634
Summary:
Ref T2787. Phortune currently stores a bunch of stuff as `...inUSDCents`. This ends up being pretty cumbersome and I worry it will create a huge headache down the road (and possibly not that far off if we do Coinbase/Bitcoin soon). Even now, it's more of a pain than I figured it would be.
Instead:
- Provide an application-level serialization mechanism.
- Provide currency serialization.
- Store currency in an abstract way (currently, as "1.23 USD") that can handle currencies in the future.
- Change all `...inUSDCents` to `..asCurrency`.
- This generally simplifies all the application code.
- Also remove some columns which don't make sense or don't make sense anymore. Notably, `Product` is going to get more abstract and mostly be provided by applications.
Test Plan:
- Created a new product.
- Purchased a product.
- Backed an initiative.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10633
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191. Long ago, Maniphest generated with 40-character mail keys. These prevent the migration to `bytes20`. We had about 300 of these on secure.phabricator.com from several years ago.
Just truncate them. This adjusts reply-to addresses, but it's very likely that none are relevant anymore.
Test Plan: Ran migration on `secure.phabricator.com` to truncate keys.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10615
Summary: Ref T1191. This predates the mdoern patch stuff and may exist on very, very old installs. By the time they apply this patch, it's guaranteed it won't matter anymore. Drop it to make the schemata consistent with expectations.
Test Plan: Ran patch on installs with and without the table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10611
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. This destroys surplus columns:
- Pholio's transaction comments have a `mockID` column, but this is not used. The `imageID` column is used instead.
- Phragment has an unused `description` column.
- Releeph has an unused `summary` column.
Test Plan:
- Grepped for usage of these columns.
- Checked that these exist in production, too.
- Ran upgrades.
- Added Pholio inline comments.
- Saw fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10591
Summary:
Ref T1191. Notable:
- Drops a very old saved query table. See comments inline: plan was to remove it after a year. It's been ~a year and two weeks.
- This has our only fulltext index. I'm not supporting that formally for now, but left a note.
- This has our only MyISAM table. I'm not supporting that explicitly for now, but it shouldn't affect anything. I may deal with this in the future.
- These tables don't actually write directly via Lisk, so there's some fiddling to get the schemata right.
Test Plan: Down to ~250 warnings. No more surplus databases or tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10589
Summary:
Ref T1191.
- Removes ponder comment table. This was migrated a very long time ago.
Test Plan:
- Grepped for removed table.
- Saw ~100 fewer issues in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10582
Summary:
Ref T1191. Notes:
- Drops the project affiliation table. This is a very old membership table which was migrated to edges.
- Drops the subproject table. This is a very old table for a removed feature.
Test Plan:
- Grepped for dropped tables.
- Saw ~100 fewer setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10581
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary:
Ref T1191.
- This drops two tables.
- Both tables were migrated to transactions a very long time ago and no longer have readers or writers.
Test Plan: Saw ~150 fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10576
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191.
- There was a varchar(50) column. I changed it to `text64`, since this length is unusual.
- There was an int(3) column. I changed it to `int32`, since this length is unusual.
Test Plan: Ran migrations, saw warnings disappear from config tool.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10524
Summary: Ref T1191. This was migrated to transactions a very long time ago.
Test Plan: Ran migration, grepped, left comments in Slowvote.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10523
Summary:
Ref T1191.
- Fixes T6096. We've migrated away from this table in T4896. The data is now in the transaction table. There have been no reads or writes to this table for some time and I haven't seen any issues from users.
- Fixes T6097. Same deal as above. The data is now in the transaction comment table.
- Fixes T6100. This cache is safe to wipe out, since it's purely read-through. Wiping it will make the migration faster. The column type change fixes storage of PHP serialized objects in a text column.
Test Plan:
- Ran migrations.
- Observed some yellow go blue on the Database Status screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6096, T6100, T6097, T1191
Differential Revision: https://secure.phabricator.com/D10520
Summary:
Fixes T5603. Puts the toggling of locking membership into the editor so we get exceptions and all that.
I think the dialogue when you try to leave a project that is locked could be a little better maybe? Right now it just says "You can't leave" and "The membership is locked" more or less; should I surface a link to the policy stuff there too?
Test Plan:
- made a project, toggled the "lock" setting, observed stickiness and good transactions being made
- locked a project and tried to leave as a non-editor - got a dialogue letting me know i couldn't
- locked a project and tried to leave as an editor - left successfully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5603
Differential Revision: https://secure.phabricator.com/D10508
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Ref T5835. This is still completely made up (no payment integration), but you can "back" an initiative, type a number in the box, and generate a database row. You can then seach for backers and things you've backed and such.
Notable changes:
- Renamed "FundBacking" to "FundBacker". The former name was sort of because you can back things multiple times, but stuff like `$backings` was just too weird.
- I think that's it?
Test Plan:
- Backed an initiative.
- Viewed that I became a backer.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10486
Summary:
Ref T5835. This is all pretty boilerplate, and does not interact with Phortune at all yet.
You can create "Initiatives", which have a title and description, and support most of the expected infrastructure (policies, transactions, mentions, edges, appsearch, remakrup, etc).
Only notable decisions:
- Initiatives have an explicit owner. I think it's good to have a single clearly-responsible user behind an initiative.
- I think that's it?
Test Plan:
- Created an initiative.
- Edited an initiative.
- Changed application policy defaults.
- Searched for initiatives.
- Subscribed to an initiative.
- Opened/closed an initiative.
- Used `I123` and `{I123}` in remarkup.
- Destroyed an initiative.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10481
Summary: As established in D10122.
Test Plan: I basically ran `arc lint --everything --apply-patches`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10437
Summary:
Fixes T6013. Old image macros/memes never had the file edge written.
We also never wrote file edges for audio.
Finally, the meme controller didn't allow public access.
Write edges for images and audio, perform a migration to populate the historic ones, and make the Editor keep them up to date going forward.
Test Plan:
- Updated image, saw new image attach and old image detach.
- Updated audio, saw new audio attach and old audio detach.
- Ran migration.
- Viewed memes as a logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6013
Differential Revision: https://secure.phabricator.com/D10411
Summary: Fixes T6006. These didn't get caught by D10392.
Test Plan: Forced migration to re-run; ran SSH commands against Phabricator.
Auditors: btrahan
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Ref T5932. Ref T5936. This implements build generations in Harbormaster, which provides the infrastructure required to both show users the previous states of restarted builds and to allow users to forcefully abort builds (and their targets).
You can view previous generations of a build by adding `?g=<n>` to the URI, but this isn't exposed in the UI anywhere yet.
Test Plan: Ran a build plan with a Sleep step in it. Reconfigured it for various sleep times and viewed previous generations of the build after restarting it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5932, T5936
Differential Revision: https://secure.phabricator.com/D10321
Summary: Resolves T5895. This reduces page load times significantly when looking at builds.
Test Plan: Viewed a build, saw the page load a lot faster.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5895
Differential Revision: https://secure.phabricator.com/D10286
Summary: Ref T5884. We migrated with "canCDN" and then had live writes with "cancdn". Move everything to "canCDN" for consistency.
Test Plan: Ran migration, verified DB only has "canCDN" afterward.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10273
Summary:
Fixes T2605.
- Add a setup warning about the stopword file.
- Provide a simpler stopword file.
Test Plan:
- Hit setup warning.
- Resolved it according to instructions.
- Added "various" to a task, then searched for it, found the task.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10258
Summary: Ref T5819. Implements basic icon and color filtering for projects.
Test Plan: {F189350}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D10230
Summary:
Ref T1049. This keeps track of how long a build target takes to execute in Harbormaster and displays it in the build view page. I'm not sure whether "Started" is really that useful once the target has completed?
Also, I change the name of the time taken depending on whether or not the target has completed; if it's still in progress it's called "Elapsed" and if it's completed then it's "Duration". The primary reason for this is that "Duration" sounds like post tense, whereas "Elapsed" is current tense. I'm not sure whether this is okay or not?
Test Plan: Ran a Sleep build step and saw the target dates / times appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: talshiri, epriestley, Korvin
Maniphest Tasks: T5824, T1049
Differential Revision: https://secure.phabricator.com/D10174
Summary:
Fixes T5840. Some time ago I incorrectly believed that `latin1_bin` collation was synonymous with "binary". It is not, and does not permit UTF8 characters outside of BMP, among other sequences.
These two tables currently have `LONGTEXT` columns which should be `LONGBLOB`. The table design is explicilty intended to accommodate invalid/unreasonably long ref names, but the collation prevents this from working properly.
After T1191, we'll have a general system for resolving this, but a user hit an issue yesterday (T5840) with a brnach name containing Chinese characters.
Test Plan:
- Tried emoji inserts into both tables, was rebuffed.
- Ran migration.
- Performed emoji inserts into both tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5840
Differential Revision: https://secure.phabricator.com/D10217
Summary:
Fixes T5677.
- Instead of using `sequence == 0` to mean "this is the backlog column", flag the column explicitly.
- Migrate existing sequence 0 columns to have the flag.
- Add the flag when initializing or copying a board.
- Remove special backlog logic when reordering columns.
Test Plan:
- Migrated columns, viewed some boards, they looked identical.
- Reordered the backlog column a bunch of times (first, last, middle, dragged other stuff around).
- Added tasks to a project, saw them show up in the reordered backlog.
- Initialized a new board and saw a backlog column show up.
- Copied an existing board and saw the backlog column come over.
- Tried to hide a backlog column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5677
Differential Revision: https://secure.phabricator.com/D10189
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary:
Ref T4896. Currently, subscriptions to commits are stored as auditors with a special "CC" type.
Instead, use normal subscriptions storage, reads and writes.
Test Plan:
- Ran migration and verified data still looked good.
- Viewed commits in UI and saw "subscribers".
- Saw "Automatically Subscribed", clicked Subscribe/Unsubscribe on a non-authored commit, saw subscriptions update.
- Pushed a commit through Herald rules and saw them trigger subscriptions and auditors.
- Used "Add CCs".
- Added CCs with mentions.
Reviewers: btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4896
Differential Revision: https://secure.phabricator.com/D10103
Summary:
Ref T1049. This uses tabs on build targets to hide the configuration details and variables by default, instead promoting the target name, it's status and a description of the build step. The description is a new field on each build step.
The primary advantage of having a description on build steps is that DevOps can configure appropriate description information (including any troubleshooting information for build failures) on build steps, and developers who have builds fail against their code review can then look at this information.
Test Plan: Viewed a build plan and saw the appropriate information.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10093
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
