Summary:
Ref T7731. Looking forward to T5791, I eventually anticipate writing an interface which looks like a webmail UI where users can review mail they've been sent and understand why they recieved (or did not receive) the mail. Roughly like `bin/mail list-outbound` / `bin/mail show-outbound` work today, but policy-aware (so you can only see messages where delivery was attempted to you).
We currently record a list of "reasons" why a mail is undeliverable, but this list is string-based (so it can not be translated once we start persisting it) and has only negative reasons (so it can not be used to fully understand reasons for delivery or nondelivery).
Make it code-based (so it can be translated) and allow both positive and negative reasons to be listed (so positive reasons can be understood).
Test Plan: Used `bin/mail show-outbound` to review mail delivery reasons, including the positive reason we currently have (forced delivery of authentication mail).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12297
Summary: Ref T5952. This adds support for a "default author" and deploys it on Maniphest.
Test Plan: used augmented (by this diff) bin/mail receive-test to test creation via an application email with a default author configured and no author specified. a task was created with the author as the default author i configured.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5952
Differential Revision: https://secure.phabricator.com/D11446
Summary: Ref T5402. This more or less "fixes" it but there's probably some polish to do?
Test Plan:
stopped and started daemons. error logs look good.
ran bin/storage upgrade. noted that `adjust` added the appropriate indices for active and archive task.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11044
Summary: Clean up some arg handling stuff.
Test Plan: Used this while debugging.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10314
Summary:
Ref T992.
- Format text/HTML bodies explicitly in `bin/mail show-outbound`.
- Provide `bin/mail show-outbound --dump-html` so you can do something like `bin/mail show-outbound --dump-html > dump.html; open dump.html` to get a browser preview somewhat easily.
Test Plan: Ran `bin/mail show-outbound` with and without `--dump-html` flag.
Reviewers: talshiri, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D10272
Summary:
Added support for side-by-side HTML and plaintext email building.
We can control if the HTML stuff is sent by by a new config, metamta.html-emails
Test Plan:
Been running this in our deployment for a few months now.
====Well behaved clients====
- Gmail
- Mail.app
====Bad clients====
- [[ http://airmailapp.com/ | Airmail ]]. They confuse Gmail too, though.
====Need testing====
- Outlook (Windows + Mac)
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: webframp, taoqiping, chad, epriestley, Korvin
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D9375
Summary:
Fixes T5185. The fundamental issue is that this `excludePHIDs` property was not saved, so the logic went like this:
- Generate `excludePHIDs` correctly.
- Pass `excludePHIDs` through the stack.
- Perform some other computations correctly.
- Queue the mail for the daemons, throwing it away. {icon bomb}
- Daemons process mail with empty `excludePHIDs` list.
Store it in the persistent properties array instead.
Also remove the "override self mail" thing, since it's only used by `bin/mail send-test` and suffers from the same issue. I think it's too useless to fix, since even if you get caught by it, `bin/mail` makes it clear why the message was dropped.
Test Plan:
Notable:
- `exclude` present in properties
- Exclusion reason under RECIPIENTS header
{P1229}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5185
Differential Revision: https://secure.phabricator.com/D10234
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary: Convert `./bin/mail` and a`./bin/sms` to use `PhutilConsoleTable` for formatting output.
Test Plan: I don't actually have mail and SMS setup on my dev box, but this is a pretty straightforward change.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9621
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
- Support file attachments in Mailgun, after D8831.
- Fix `bin/mail send-test --attach ...` flag.
- Make `bin/mail send-test` route mail through the daemons.
- Remove the `workerTaskID` on MetaMTAMail, which is only used (needlessly) by `bin/mail resend` and creates a huge mess elsewhere.
- Currently, when mail fails, the daemon exits with a very generic and useless message. Instead, make `sendNow()` throw when it fails, so the real reason is surfaced. This is OK now because mail is always sent via the daemons.
- Now that Mailgun supports attachments, document it.
- Update a bunch of mail docs.
Test Plan:
- Sent mail.
- Sent mail with attachments.
- Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8832
Summary:
Fixes T4202. We have old code in MetaMTA which implements gradual backoff and maximum retries.
However, we have more general code in the task queue which does this, too. We can just use the more general stuff in the task queue; it obsoletes the specific stuff in MetaMTA, which is more complex and ran into some kind of issue in T4202.
Remove `retryCount`, `nextRetry` (obsoleted by task queue retry mechanisms) and "simulated failures" (no longer in use).
Generally, modern infrastructure has replaced these mechanisms with more general ones.
Test Plan:
- Sent mail.
- Observed unsendable mail failing in reasonable ways in the queue.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4202
Differential Revision: https://secure.phabricator.com/D8115
Summary:
Ref T2015. Not directly related to Drydock, but I bumped into this. All these scripts currently enumerate their workflows explicitly.
Instead, use `PhutilSymbolLoader` to automatically discover workflows. This reduces code duplication and errors (see all the bad `extends` this diff fixes) and lets third parties add new workflows (not clearly valuable?).
Test Plan: Ran `bin/x help` for each modified script.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7840
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary:
Mailbox sometimes (?) changes the case of the email address (?). Be more liberal in what we accept.
Also fix a minor output bug.
Test Plan: Sent mail to `e1+...` instead of `E1+...`, verified it arrived.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7575
Summary: Ref T603. Allow global default policies to be configured for tasks.
Test Plan:
- Created task via web UI.
- Created task via Conduit.
- Created task via email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7267
Summary: Ref T603. Killing this class is cool because the classes that replace it are policy-aware. Tried to keep my wits about me as I did this and fixed a few random things along the way. (Ones I remember right now are pulling a query outside of a foreach loop in Releeph and fixing the text in UIExample to note that the ace of hearts if "a powerful" card and not the "most powerful" card (Q of spades gets that honor IMO))
Test Plan: tested the first few changes (execute, executeOne X handle, object) then got real mechanical / careful with the other changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, FacebookPOC
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6941
Summary: Missed this when moving most MetaMTA responsibilities to the CLI. Show the correct command to get data rather than linking to a 404.
Test Plan: {F56733}
Reviewers: wez, btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6846
Summary:
Ref T3306. Moves this from the web to the CLI, which is a tiny bit clunkier but way better as far as policies go and more repeatable for development.
See discussion in D6413.
Test Plan: Ran `bin/mail receive-test`, verified mail was received. Used and abused various options.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3306
Differential Revision: https://secure.phabricator.com/D6417
Summary: We can't show this stuff on the web UI because it has password reset links and private reply-to addresses, but we can provide easier CLI tools than "root around in the database". Land a rough version of `bin/mail show-inbound` and `bin/mail show-outbound`.
Test Plan: Used both commands to examine mail from the CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: tido, euresti, aran
Differential Revision: https://secure.phabricator.com/D5963
Summary:
Fixes T2458. Ref T2843. @tido's email from T2843 has exhausted its retries and failed, but we want to try it again with the patch from D5464 to capture the actual error. This sort of thing has come up a few times in debugging, too.
Also fixed some stuff that came up while debugging this.
Test Plan:
- Ran command with no args.
- Ran resend with no args.
- Ran resend with bad IDs.
- Ran resend with already-queued messages, got "already queued" error.
- Ran resend with already-sent message, got requeue.
Reviewers: btrahan, tido
Reviewed By: tido
CC: aran
Maniphest Tasks: T2458, T2843
Differential Revision: https://secure.phabricator.com/D5493
