Summary: Depends on D20036. Ref T13222. Now that we support one-shot MFA, swap this from session MFA to one-shot MFA.
Test Plan: Revealed a credential, was no longer left in high-security mode.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20037
Summary:
Depends on D20035. Ref T13222.
- Allow individual transactions to request one-shot MFA if available.
- Make "change username" request MFA.
Test Plan:
- Renamed a user, got prompted for MFA, provided it.
- Saw that I no longer remain in high-security after performing the edit.
- Grepped for other uses of `PhabricatorUserUsernameTransaction`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20036
Summary: Depends on D20034. Ref T13222. This is just cleanup -- I thought we'd have like two of these, but we ended up having a whole lot in Duo and a decent number in SMS. Just let factors return a result explicitly if they can make a decision early. I think using `instanceof` for control flow is a lesser evil than using `catch`, on the balance.
Test Plan: `grep`, went through enroll/gate flows on SMS and Duo.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20035
Summary:
Depends on D20033. Ref T13222. Flesh this UI out a bit, and provide bit-strength information for TOTP.
Also, stop users from adding multiple SMS factors since this is pointless (they all always text your primary contact number).
Test Plan:
{F6156245}
{F6156246}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20034
Summary: Ref T13222. Providers can now be deprecated (existing factors still work, but users can't add new factors for the provider) or disabled (factors stop working, also can't add new ones).
Test Plan:
- Enabled, deprecated, and disabled some providers.
- Viewed provider detail, provider list.
- Viewed MFA settings list.
- Verified that I'm prompted for enabled + deprecated only at gates.
- Tried to disable final provider, got an error.
- Hit the MFA setup gate by enabling "Require MFA" with no providers, got a more useful message.
- Immediately forced a user to the "MFA Setup Gate" by disabling their only active provider with another provider enabled ("We no longer support TOTP, you HAVE to finish Duo enrollment to continue starting Monday.").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20031
Summary:
See T13240. Ref T13242. When we're issuing a query that will raise policy exceptions (i.e., give the user a "You Shall Not Pass" dialog if they can not see objects it loads), don't do space filtering in MySQL: when objects are filtered out in MySQL, we can't distinguish between "bad/invalid ID/object" and "policy filter", so we can't raise a policy exception.
This leads to cases where viewing an object shows "You Shall Not Pass" if you can't see it for any non-Spaces reason, but "404" if the reason is Spaces.
There's no product reason for this, it's just that `spacePHID IN (...)` is important for non-policy-raising queries (like a list of tasks) to reduce how much application filtering we need to do.
Test Plan:
Before:
```
$ git pull
phabricator-ssh-exec: No repository "spellbook" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
After:
```
$ git pull
phabricator-ssh-exec: [You Shall Not Pass: Unknown Object (Repository)] This object is in a space you do not have permission to access.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13242
Differential Revision: https://secure.phabricator.com/D20042
Summary:
Depends on D20026. Ref T13222. Ref T13231. The primary change here is that we'll no longer send you an SMS if you hit an MFA gate without CSRF tokens.
Then there's a lot of support for genralizing into Duo (and other push factors, potentially), I'll annotate things inline.
Test Plan: Implemented Duo, elsewhere.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D20028
Summary: Depends on D20025. Ref T13231. Although I'm not currently planning to actually upstream a Duo MFA provider, it's probably easiest to put most of the support pieces in the upstream until T5055.
Test Plan: Used a test script to make some (mostly trivial) API calls and got valid results back, so I think the parameter signing is correct.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13231
Differential Revision: https://secure.phabricator.com/D20026
Summary: See PHI1038. I missed these when pulling the code out.
Test Plan: Sent "Must encrypt" mail, verified it made it through the queue in one piece.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20029
Summary:
Ref T920. Ref T13235. This adds a `Future`, similar to `TwilioFuture`, for interacting with Amazon's SNS service.
Also updates the documentation.
Also makes the code consistent with the documentation by accepting a `media` argument.
Test Plan: Clicked the "send test message" button from the Settings UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13235, T920
Differential Revision: https://secure.phabricator.com/D19982
Summary: Depends on D20024. See D20022. Put something in place temporarily until we build out validation at some point.
Test Plan: Sent myself a test message.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20025
Summary:
Depends on D20023. Ref T13222. Although I think this isn't strictly necessary from a pure security perspective (since you can't modify the primary number while you have MFA SMS), it seems like a generally good idea.
This adds a slightly new MFA mode, where we want MFA if it's available but don't strictly require it.
Test Plan: Disabled, enabled, primaried, unprimaried, and edited contact numbers. With MFA enabled, got prompted for MFA. With no MFA, no prompts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20024
Summary:
Depends on D20022. Ref T13222. Since you can easily lock yourself out of your account by swapping to a bad number, prevent contact number edits while "contact number" MFA (today, always SMS) is enabled.
(Another approach would be to bind factors to specific contact numbers, and then prevent that number from being edited or disabled while SMS MFA was attached to it. However, I think that's a bit more complicated and a little more unwieldy, and ends up in about the same place as this. I'd consider it more strongly in the future if we had like 20 users say "I have 9 phones" but I doubt this is a real use case.)
Test Plan:
- With SMS MFA, tried to edit my primary contact number, disable it, and promote another number to become primary. Got a sensible error message in all cases.
- After removing SMS MFA, did all that stuff with no issues.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20023
Summary:
Depends on D20021. Ref T13222. This has a few rough edges, including:
- The challenges theselves are CSRF-able.
- You can go disable/edit your contact number after setting up SMS MFA and lock yourself out of your account.
- SMS doesn't require MFA so an attacker can just swap your number to their number.
...but mostly works.
Test Plan:
- Added SMS MFA to my account.
- Typed in the number I was texted.
- Typed in some other different numbers (didn't work).
- Cancelled/resumed the workflow, used SMS in conjunction with other factors, tried old codes, etc.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20022
Summary:
Depends on D20020. Ref T13222. This puts another step in the MFA enrollment flow: pick a provider; read text and click "Continue"; actually enroll.
This is primarily to stop CSRF attacks, since otherwise an attacker can put `<img src="phabricator.com/auth/settings/enroll/?providerPHID=xyz" />` on `cute-cat-pix.com` and get you to send yourself some SMS enrollment text messages, which would be mildly annoying.
We could skip this step if we already have a valid CSRF token (and we often will), but I think there's some value in doing it anyway. In particular:
- For SMS/Duo, it seems nice to have an explicit "we're about to hit your phone" button.
- We could let installs customize this text and give users a smoother onboard.
- It allows the relatively wordy enroll form to be a little less wordy.
- For tokens which can expire (SMS, Duo) it might save you from answering too slowly if you have to go dig your phone out of your bag downstairs or something.
Test Plan: Added factors, read text. Tried to CSRF the endpoint, got a dialog instead of a live challenge generation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20021
Summary:
Depends on D20019. Ref T13222. Currently, TOTP uses a temporary token to make sure you've set up the app on your phone properly and that you're providing an answer to a secret which we generated (not an attacker-generated secret).
However, most factor types need some kind of sync token. SMS needs to send you a code; Duo needs to store a transaction ID. Turn this "TOTP" token into an "MFA Sync" token and lift the implementation up to the base class.
Also, slightly simplify some of the HTTP form gymnastics.
Test Plan:
- Hit the TOTP enroll screen.
- Reloaded it, got new secrets.
- Reloaded it more than 10 times, got told to stop generating new challenges.
- Answered a challenge properly, got a new TOTP factor.
- Grepped for removed class name.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20020
Summary:
Depends on D20018. Ref T13222. When you add a new MFA configuration, you can technically (?) guess your way through it with brute force. It's not clear why this would ever really be useful (if an attacker can get here and wants to add TOTP, they can just add TOTP!) but it's probably bad, so don't let users do it.
This limit is fairly generous because I don't think this actually part of any real attack, at least today with factors we're considering.
Test Plan:
- Added TOTP, guessed wrong a ton of times, got rate limited.
- Added TOTP, guessed right, got a TOTP factor configuration added to my account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20019
Summary:
Depends on D20017. Ref T13222. Currently, if you:
- type some text at a TOTP gate;
- wait ~60 seconds for the challenge to expire;
- submit the form into a "Wait patiently" message; and
- mash that wait button over and over again very patiently
...you still rack up rate limiting points, because the hidden text from your original request is preserved and triggers the "is the user responding to a challenge" test. Only perform this test if we haven't already decided that we're going to make them wait.
Test Plan:
- Did the above; before patch: rate limited; after patch: not rate limited.
- Intentionally typed a bunch of bad answers which were actually evaluated: rate limited properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20018
Summary:
Depends on D20016. Ref T920. This does nothing interesting on its own since the TOTP provider has no guidance/warnings, but landing it separately helps to simplify an upcoming SMS diff.
SMS will have these guidance messages:
- "Administrator: you haven't configured any mailer which can send SMS, like Twilio."
- "Administrator: SMS is weak."
- "User: you haven't configured a contact number."
Test Plan: {F6151283} {F6151284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20017
Summary:
Depends on D20013. Recently, I renamed the "Account" panel to "Language".
When you land on "Settings" and the first panel is an "EditEngine" panel ("Account/Langauge", "Date and Time", and "Conpherence" are all "EditEngine" panels), the engine shows the controls for the first panel.
However, the "first panel" according to EditEngine and the "first panel" in the menu are currently different: the menu groups panels into topics.
When I renamed "Account" to "Language", it went from conicidentally being the first panel in both lists to being the second panel in the grouped menu list and the, uh, like 12th panel in the ungrouped raw list.
This made landing on "Settings" show you the right chrome, but show you a different panel's controls ("Conpherence", now alphabetically first).
Instead, use the same order in both places.
(This was also a pre-existing bug if you use a language which translates the panel names such that "Account" is not alphabetically first.)
Test Plan: Visited "Settings", saw "Date & Time" form controls instead of "Conpherence" form controls on the default screen with "Date & Time" selected in the menu.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20016
Summary:
Depends on D20012. Ref T920. If you have a test adapter configured, it should swallow messages and prevent them from ever hitting a lower-priority adapter.
Make the test adapter support SMS so this actually happens.
Test Plan: Ran `bin/mail send-test --type sms ...` with a test adapter (first) and a Twilio adapter (second). Got SMS swallowed by test adapter instead of live SMS messages.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20013
Summary:
Depends on D20011. Ref T920. This change lets a "MetaMTAMail" storage object represent various different types of messages, and makes "all" the `bin/mail` stuff "totally work" with messages of non-email types.
In practice, a lot of the related tooling needs some polish/refinement, but the basics work.
Test Plan: Used `echo beep boop | bin/mail send-test --to epriestley --type sms` to send myself SMS.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20012
Summary:
Depends on D20010. Ref T920. Allow users to designate which contact number is "primary": the number we'll actually send stuff to.
Since this interacts in weird ways with "disable", just do a "when any number is touched, put all of the user's rows into the right state" sort of thing.
Test Plan:
- Added numbers, made numbers primary, disabled a primary number, un-disabled a number with no primaries. Got sensible behavior in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20011
Summary: Depends on D20008. Ref T920. Continue fleshing out contact number behaviors.
Test Plan:
- Enabled and disabled a contact number.
- Saw list, detail views reflect change.
- Added number X, disabled it, added it again (allowed), enabled the disabled one ("already in use" exception).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20010
Summary:
Depends on D20006. Ref T13222. Currently, the "MFA Is Required" gate doesn't let you do anything else, but you'll need to be able to access "Contact Numbers" if an install provides SMS MFA.
Tweak this UI to give users limited access to settings, so they can set up contact numbers and change their language.
(This is a little bit fiddly, and I'm doing it early on partly so it can get more testing as these changes move forward.)
Test Plan: {F6146136}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20008
Summary:
Depends on D19988. See D19826 for the last UI expansion. I don't have an especially strong product rationale for un-fixed-width'ing Settings since it doesn't suffer from the "mystery meat actions" issues that other fixed-width UIs do, but I like the full-width UI better and the other other fixed-width UIs all (?) have some actual rationale (e.g., large tables, multiple actions on subpanels), so "consistency" is an argument here.
Also rename "account" to "language" since both settings are language-related.
This moves away from the direction in D18436.
Test Plan:
Clicked each Settings panel, saw sensible rendering at full-width.
{F6145944}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20005
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary:
Ref T13222. This updates the CLI tools and documentation for the changes in D19975.
The flags `--type` and `--all-types` retain their current meaning. In most cases, `bin/auth strip --type totp` is sufficient and you don't need to bother looking up the relevant provider PHID. The existing `bin/auth list-factors` is also unchanged.
The new `--provider` flag allows you to select configs from a particular provider in a more granular way. The new `bin/auth list-mfa-providers` provides an easy way to get PHIDs.
(In the Phacility cluster, the "Strip MFA" action just reaches into the database and deletes rows manually, so this isn't terribly important. I verified that the code should still work properly.)
Test Plan:
- Ran `bin/auth list-mfa-providers`.
- Stripped by user / type / provider.
- Grepped for `list-factors` and `auth strip`.
- Hit all (?) of the various possible error cases.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19976
Summary:
Ref T13222. Users configure "Factor Configs", which say "I have an entry on my phone for TOTP secret key XYZ".
Currently, these point at raw implementations -- always "TOTP" in practice.
To support configuring available MFA types (like "no MFA") and adding MFA types that need some options set (like "Duo", which needs API keys), bind "Factor Configs" to a "Factor Provider" instead.
In the future, several "Factors" will be available (TOTP, SMS, Duo, Postal Mail, ...). Administrators configure zero or more "MFA Providers" they want to use (e.g., "Duo" + here's my API key). Then users can add configs for these providers (e.g., "here's my Duo account").
Upshot:
- Factor: a PHP subclass, implements the technical details of a type of MFA factor (TOTP, SMS, Duo, etc).
- FactorProvider: a storage object, owned by administrators, configuration of a Factor that says "this should be available on this install", plus provides API keys, a human-readable name, etc.
- FactorConfig: a storage object, owned by a user, says "I have a factor for provider X on my phone/whatever with secret key Q / my duo account is X / my address is Y".
Couple of things not covered here:
- Statuses for providers ("Disabled", "Deprecated") don't do anything yet, but you can't edit them anyway.
- Some `bin/auth` tools need to be updated.
- When no providers are configured, the MFA panel should probably vanish.
- Documentation.
Test Plan:
- Ran migration with providers, saw configs point at the first provider.
- Ran migration without providers, saw a provider created and configs pointed at it.
- Added/removed factors and providers. Passed MFA gates. Spot-checked database for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19975
Summary: If you go through the `accountadmin` flow and change nothing, you get an exception about the transaction not having any effect. Instead, let the `applyTransactions` call continue even on no effect.
Test Plan: Ran `accountadmin` without changing anything for an existing user. No longer got an exception about no-effect transactions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20009
Summary: See https://secure.phabricator.com/D18901#249481. Update the docs and a warning string to reflect the new reality that `bin/auth recover` is now able to recover any account, not just administrators.
Test Plan: Mk 1 eyeball
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20007
Summary:
See PHI1030. When you edit an Almanac object, we attempt to discover all the related objects so we can dirty the repository cluster routing cache: if you modify a Device or Service that's part of a clustered repository, we need to blow away our cached view of the layout.
Currently, we don't correctly find linked Bindings when editing a Device, so we may miss Services which have keys that need to be disabled. Instead, discover these linked objects.
See D17000 for the original implementation and more context.
Test Plan:
- Used `var_dump()` to dump out the discovered objects and dirtied cache keys.
- Before change: editing a Service dirties repository routing keys (this is correct), but editing a Device does not.
- After change: editing a Device now correctly dirties repository routing keys.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20003
Summary:
Fixes T13082. When you create a revision (say, `D111`) with `Ref T222` in the body, we write a `D111 -> T222` edge ("revision 111 references task 222") and an inverse `T222 -> D111` edge ("task 222 is referenced by revision 111").
We also apply a transaction to `D111` ("alice added a task: Txxx.") and an inverse transaction to `T222` ("alice added a revision: Dxxx").
Currently, it appears that the inverse transaction can sometimes generate mail faster than `D111` actually commits its (database) transactions, so the mail says "alice added a revision: Unknown Object (Differential Revision)". See T13082 for evidence that this is true, and a reproduction case.
To fix this, apply the inverse transaction (to `T222`) after we commit the main object (here, `D111`).
This is tricky because when we apply transactions, the transaction editor automatically "fixes" them to be consistent with the database state. For example, if a task already has title "XYZ" and you set the title to "XYZ" (same title), we just no-op the transaction.
It also fixes edge edits. The old sequence was:
- Open (database) transaction.
- Apply our transaction ("alice added a task").
- Apply the inverse transaction ("alice added a revision").
- Write the edges to the database.
- Commit (database) transaction.
Under this sequence, the inverse transaction was "correct" and didn't need to be fixed, so the fixing step didn't touch it.
The new sequence is:
- Open (database) transaction.
- Apply our transaction ("alice added a task").
- Write the edges.
- Commit (database) transaction.
- Apply the inverse transaction ("alice added a revision").
Since the inverse transaction now happens after the database edge write, the fixing step detects that it's a no-op and throws it away if we do this naively.
Instead, add some special cases around inverse edits to skip the correction/fixing logic, and just pass the "right" values in the first place.
Test Plan:
Added and removed related tasks from revisions, saw appropriate transactions render on both objects.
(It's hard to be certain this completely fixes the issue since it only happened occasionally in the first place, but we can see if it happens any more on `secure`.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13082, T222
Differential Revision: https://secure.phabricator.com/D19969
Summary: See PHI1030. When installs hit this error, provide more details about which node we ended up on and what's going on.
Test Plan:
```
$ git pull
phabricator-ssh-exec: This repository request (for repository "spellbook") has been incorrectly routed to a cluster host (with device name "local.phacility.net", and hostname "orbital-3.local") which can not serve the request.
The Almanac device address for the correct device may improperly point at this host, or the "device.id" configuration file on this host may be incorrect.
Requests routed within the cluster by Phabricator are always expected to be sent to a node which can serve the request. To prevent loops, this request will not be proxied again.
(This is a read request.)
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20002
Summary: Fixes T13239. See that task for discussion.
Test Plan: Tried to send welcome mail with no "Welcome" message.
Maniphest Tasks: T13239
Differential Revision: https://secure.phabricator.com/D20001
Summary:
See PHI1026. Allow installs to export Conduit call logs to a flat format.
Also, add date range queries.
Test Plan:
- Exported some call logs.
- Filtered logs by date.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19996
Summary:
Depends on D19994. See PHI1027. If an install has customized the "Welcome Mail" message, include it in welcome mail. A special custom message from the profile screen overrides it, if provided.
(I fiddled with putting the custom message as "placeholder" text in the remarkup area as a hint, but newlines in "placeholder" text appear to have issues in Safari and Firefox. I think this is probably reasonably clear as-is.)
Make both render remarkup-into-text so things like links work properly, as it's reasonably likely that installs will want to link to things.
Test Plan:
- With custom "Welcome Mail" text, sent mail with no custom override (got custom text) and a custom override (got overridden text).
- Linked to some stuff, got sensible links in the mail (`bin/mail show-outbound`).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19995
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
Ref T13222. Long ago, we had a Config option (`welcome.html`) to let you dump HTML onto the login screen, but this was relatively hard to use and not good from a security perspective.
In some cases this was obsoleted by Dashboards, but there's at least some remaining set of use cases for actual login instructions on the login screen. For example, WMF has some guidance on //which// SSO mechanism to use based on what types of account you have. On `secure`, users assume they can register by clicking "Log In With GitHub" or whatever, and it might reduce frustration to tell them upfront that registration is closed.
Some other types of auth messaging could also either use customization or defaults (e.g., the invite/welcome/approve mail).
We could do this with a bunch of Config options, but I'd generally like to move to a world where there's less stuff in Config and more configuration is contextual. I think it tends to be easier to use, and we get a lot of fringe benefits (granular permissions, API, normal transaction logs, more abililty to customize workflows and provide contextual help/hints, etc). Here, for example, we can provide a remarkup preview, which would be trickier with Config.
This does not actually do anything yet.
Test Plan: {F6137541}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19992
Summary:
See PHI1027. Currently, we allow you to customize invite email, but not most other types of email (approve, welcome). As a step forward, also allow welcome email to be customized with a message.
I considered separating the custom text from the main text with something heavyhanded ("alice added this custom message:") or a beautiful ASCII art divider like one of these:
https://www.asciiart.eu/art-and-design/dividers
...but nothing truly sung to me.
This only works on the profile flow for now. I'm planning to let you set a default message. I may or may not let you customize from "Create New User", seems like the default message probably covers most of that. Probably won't touch `scripts/user/add_user.php` since that's not really exactly super supported.
Test Plan:
Sent mail with and without custom messages, reviewed it with `bin/mail show-outbound`.
{F6137410}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19991
Summary:
See PHI1027. Currently, the "Welcome" mail always tells users to set a password. This definitely isn't helpful if an install doesn't have password auth enabled.
We can't necessarily guess what they're supposed to do, so just give them generic instructions ("set up your account"). Upcoming changes will give administrators more control over the mail content.
Test Plan: Sent both versions of the mail, used `bin/mail show-outbound` to inspect them for correctness.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19990
Summary:
Ref PHI1027. Currently, `PhabricatorUser` has a couple of mail-related methods which shouldn't really be there in the long term. Immediately, I want to make some adjusments to the welcome email.
Move "Welcome" mail generation to a separate class and consolidate all the error handling. (Eventually, "invite" and "verify address" email should move to similar subclasses, too.) Previously, a bunch of errors/conditions got checked in multiple places.
The only functional change is that we no longer allow you to send welcome mail to disabled users.
Test Plan:
- Used "Send Welcome Mail" from profile pages to send mail.
- Hit "not admin", "disabled user", "bot/mailing list" errors.
- Used `scripts/user/add_user.php` to send welcome mail.
- Used "Create New User" to send welcome mail.
- Verified mail with `bin/mail show-outbound`. (Cleaned up a couple of minor display issues here.)
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19989
Summary: Ref T13238. Warn users about these horrible options and encourage them to defuse them.
Test Plan: Hit both warnings, fixed the issues, issues went away.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13238
Differential Revision: https://secure.phabricator.com/D19999
Summary:
Ref T13222. Currently, if a remote address fails a few login attempts (5) in a short period of time (15 minutes) we require a CAPTCHA for each additional attempt.
This relies on:
- Administrators configuring ReCAPTCHA, which they may just not bother with.
- Administrators being comfortable with Google running arbitrary trusted Javascript, which they may not be comfortable with.
- ReCAPTCHA actually being effective, which seems likely true for unsophisticated attackers but perhaps less true for more sophisticated attackers (see <https://github.com/ecthros/uncaptcha2>, for example).
(For unsophisticated attackers and researchers, "Rumola" has been the standard CAPTCHA bypass tool for some time. This is an extension that pays humans to solve CAPTCHAs for you. This is not practical at "brute force a strong password" scale. Google appears to have removed it from the Chrome store. The "submit the captcha back to Google's APIs" trick probably isn't practical at brute-force-scale either, but it's easier to imagine weaponizing that than weaponizing human solvers.)
Add a hard gate behind the CAPTHCA wall so that we fail into a secure state if there's no CAPTCHA or the attacker can defeat CAPTCHAs at a very low cost.
The big downside to this is that an attacker who controls your remote address (e.g., is behind the same NAT device you're behind on corpnet) can lock you out of your account. However:
- That //should// be a lot of access (although maybe this isn't that high of a barrier in many cases, since compromising a "smart fridge" or "smart water glass" or whatever might be good enough).
- You can still do "Forgot password?" and login via email link, although this may not be obvious.
Test Plan:
- Logged in normally.
- Failed many many login attempts, got hard gated.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19997
Summary:
In ~2012, the first of these options was added because someone who hates dogs and works at Asana also hated `[Differential]` in the subject line. The use case there was actually //removing// the text, not changing it, but I made the prefix editable since it seemed like slightly less of a one-off.
These options are among the dumbest and most useless config options we have and very rarely used, see T11760. A very small number of instances have configured one of these options.
Newer applications stopped providing these options and no one has complained.
You can get the same effect with `translation.override`. Although I'm not sure we'll keep that around forever, it's a reasonable replacement today. I'll call out an example in the changelog to help installs that want to preserve this option.
If we did want to provide this, it should just be in {nav Applications > Settings} for each application, but I think it's wildly-low-value and "hack via translations" or "local patch" are entirely reasonable if you really want to change these strings.
Test Plan: Grepped for `subject-prefix`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19993
