Summary: Depends on D19173. Ref T13096. Adds an optional, disabled-by-default lock log to make it easier to figure out what is acquiring and holding locks.
Test Plan: Ran `bin/lock log --enable`, `--disable`, `--name`, etc. Saw sensible-looking output with log enabled and daemons restarted. Saw no additional output with log disabled and daemons restarted.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19174
Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary:
Depends on D19099. Ref T13077. Updates Phriction documents to string constants to make API interactions cleaner and statuses more practical to extend.
This does not seem to require any transaction migrations because none of the Phriction transactions actually store status values: status is always a side effect of other edits.
Test Plan: Created, edited, deleted, moved documents. Saw appropriate UI cues. Browsed and filtered documents by status in the index.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19100
Summary:
Depends on D19095. Ref T6203. Ref T13077. This column is nullable in an inconsistent way. Make it non-nullable.
Also clean up one more content query on the history view.
Test Plan: Ran migration, then created and edited documents without providing a descriptino or hitting `NULL` exceptions.
Maniphest Tasks: T13077, T6203
Differential Revision: https://secure.phabricator.com/D19096
Summary: Ref T13077. Prepares for modern API access to document history using standard "v3" APIs.
Test Plan: Ran migration, verified PHIDs appeared in the database. Created/edited a document, got even more PHIDs in the database.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19092
Summary:
Ref T13072. See PHI361. The bug in T10746 where aborting builds didn't propagate properly to the buildable was fixed, but existing builds are still stuck "Building".
Since it doesn't look like anything will moot this before these changes promote to `stable`, just migrate these builds into "failed".
Test Plan: Ran migration, saw it affect only relevant builds and correctly fail them.
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D19091
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary: Depends on D19056. Fixes T8475. Ref T13054. Merges "ModernHunk" back into "Hunk".
Test Plan: Grepped for `modernhunk`. Reviewed revisions. Created a new revision. Used `bin/differential migrate-hunk` to migrate hunks between storage formats and back.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19057
Summary: Ref T13054. Ref T8475. This table has had no readers or writers for more than a year after it was migrated to the modern table.
Test Plan: Ran migration, verified that all the data was still around.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19056
Summary: These transaction constants are flipped, which can produce the wrong result in some cases.
Test Plan: `./bin/storage upgrade -f --apply phabricator:20180208.maniphest.02.populate.php`
Differential Revision: https://secure.phabricator.com/D19054
Summary: Ref T11330. Adds general support for webhooks. This is still rough and missing a lot of pieces -- and not yet useful for anything -- but can make HTTP requests.
Test Plan: Used `bin/webhook call ...` to complete requests to a test endpoint.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19045
Summary:
Ref T4434. Although some of the use cases for this data are better fits for Facts, this data is reasonable to track separately.
I have an approximate view of it already ("closed, ordered by date modified") that's useful to review things that were fixed recently. This lets us make that view more effective.
This just adds (and populates) the storage. Followups will add Conduit, Export, Search, and UI support.
This is slightly tricky because merges work oddly (see T13020).
Test Plan:
- Ran migration, checked database for sensible results.
- Created a task in open/closed status, got the right database values.
- Modified a task to close/open it, got the right values.
- Merged an open task, got updates.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19037
Summary:
Depends on D19012. Ref T13053. In D19012, I've changed "Thread-Topic" to always use PHIDs.
This change drops the selective on-object storage we have to track the original, human-readable title for objects.
Even if we end up backing out the "Thread-Topic" change, we'd be better off storing this in a table in the Mail app which just has `<objectPHID, first subject we used when sending mail for that object>`, since then we get the right behavior without needing every object to have this separate field.
Test Plan: Grepped for `original`, `originalName`, `originalTitle`, etc.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19013
When we change a nullable column to a non-nullable column, we can get a
data truncation error if any value was "NULL".
This is exceptionally unusual, but our two very oldest Herald rules have
a "NULL" policy on `secure`.
Summary:
Depends on D18926. Ref T6203. Ref T13048. Herald rule repetition policies are stored as integers but treated as strings in most contexts.
After D18926, the integer stuff is almost totally hidden inside `HeraldRule` and getting rid of it completely isn't too tricky.
Do so now.
Test Plan:
- Created "only the first time" and "every time" rules. Did a SELECT on their rows in the database.
- Ran migrations, got a clean bill of health from `storage adjust`.
- Did another SELECT on the rows, saw a faithful conversion to strings "every" and "first".
- Edited and reviewed rules, swapping them between "every" and "first".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T6203
Differential Revision: https://secure.phabricator.com/D18927
Summary:
Ref T13048. This migration is from January 2012 and probably only impacted Facebook.
It references `HeraldRepetitionPolicyConfig`, which I'd like to change significantly. I initially just replaced the constant with a literal `0`, but I don't think there's any actual value in retaining this migration nowadays.
The cost of removing this migration is: if you installed Phabricator before January 2012 and haven't upgraded since then, you'll have a few more rows in the `APPLIED` table than necessary. Herald will still work correctly.
Test Plan: Reading.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18924
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary: See PHI177. Ref T12974. PonderQuestion was overlooked during the Ferret engine conversions.
Test Plan:
Ran migrations, searched for questions, got results:
{F5241185}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18736
Summary:
Ref T13000. This adds support for tracking "common" ngrams, which occur in too many documents to be useful as part of the ngram index.
If an ngram is listed in the "common" table, it won't be written when indexing documents, or queried for when searching for them.
In this change, nothing actually writes to the "common" table. I'll start writing to the table in a followup change.
Specifically, I plan to do this:
- A new GC process updates the "common" table periodically, by writing ngrams which appear in more than X% of documents to it, for some value of X, if there are at least a minimum number of documents (maybe like 4,000).
- A new GC process deletes ngrams that have been added to the common table from the existing indexes.
Hopefully, this will pare down the ngrams index to something reasonable over time without requiring any manual tuning.
Test Plan:
- Ran some queries and indexes.
- Manually inserted ngrams `xxx` and `yyy` into the ngrams table, searched and indexed, saw them ignored as viable ngrams for search/index.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18672
Summary:
Ref T12987. I was focused on the RefCursor table and overlooked that we need some care on this key.
It's currently possible to run `bin/storage upgrade --no-adjust`, then start Phabricator, and end up with duplicate records in this table. If you try to run `bin/storage adjust` later, it will try to add the unique key but fail. This is unusual for normal installs (they usually do not use `--no-adjust`) but we do it in the cluster and I did this exact thing on `secure`.
Normally, to avoid this, when a new table with a unique key is introduced, we also add a migration to explicitly add that key.
This is mostly harmless in this case. Fix this mistake (force the table to contain only unique rows; add the key) and try using `LOCK TABLES` to make this atomic. If this doesn't cause problems we can use this in similar situations in the future.
The "alter table may unlock things" warning comes from here:
https://dev.mysql.com/doc/refman/5.7/en/lock-tables.html
It seems like it's fine to issue `UNLOCK TABLES` even if you don't have any locks, so I think this script should always do the right thing now, regardless of ALTER TABLE unlocking or not unlocking tables.
Test Plan: Ran `bin/storage upgrade -f`, saw table end up in the right state. I'll also check this on `secure`, where the starting state is a little messier.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12987
Differential Revision: https://secure.phabricator.com/D18623
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. This populates the new RefPosition table based on the existing RefCursor table, and deletes now-duplicate rows in the RefCursor table so the next change can add a unique key.
This change is not standalone, and there need to be separate code updates. I have a rough version of that written, but this migration needs to happen first to test it.
I'll hold this whole series of changes until after the release cut and until the code is updated.
Test Plan: Ran migration, spot-checked database tables. Saw redundant rows remove and correct-looking rows populated into the new RefPosition table.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18612
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
Ref T12819. This is shipping, so issue upgrade guidance to instruct installs to rebuild the index.
Also generate a new `quickstart.sql` since we haven't regenerated in a bit and there's been a large amount of table churn fairly recently.
Test Plan: Ran `bin/storage upgrade`, saw guidance notification in UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18594
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary: Ref T12819. Support for Pholio.
Test Plan: Indexed and searched mocks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18569
Summary: Ref T12819. Adds ferret engine support for Calendar events.
Test Plan: Indexed and queried calendar events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18568
Summary: Ref T12819. Adds Ferret engine support.
Test Plan: Indexed and searched for documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18567
Summary: Ref T12819. Adds support for projects.
Test Plan: Indexed and searched for projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18566
Summary: Ref T12819. Mostly straightforward, with a couple of minor query modernization things.
Test Plan: Indexed and searched for posts and blogs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18565
Summary: Ref T12819. Same deal as before, but smaller diffs after D18559.
Test Plan: Indexed and searched for packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18564
Summary: Ref T12819. Adds Ferret support to Passphrase.
Test Plan: Indexed credentials, searched for credentials.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18556
Summary: Ref T12819. Adds Ferret engine support to initiatives.
Test Plan: Indexed and searched for initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18555
Summary:
Ref T12819. Adds support for indexing user accounts so they appear in global fulltext results.
Also, always rank users ahead of other results.
Test Plan: Indexed users. Searched for a user, got that user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18552
Summary: Ref T12819. Adds storage and indexing for the Ferret engine to Differential.
Test Plan: Ran `bin/search index D123 --force`, saw indexes appear in database. No UI/user impact yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18540
