Summary: Ref T13269. Same as D20379 with the polarity reversed.
Test Plan: Added some triggers, removed some projects, observed expected results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20390
Summary: Ref T13269. This is mostly copying code from the similar Herald implementation. Note that the drop effect preview always renders because we don't have the infrastructure to compare lists of edge targets.
Test Plan: Created some triggers, dragged some tasks around, checked that tasks that already had project membership didn't write additional edges.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20379
Summary:
Ref T13263.
- Make the user profile section of the "Profile" dropdown menu have a transparent background, not a white background. This is a pre-existing issue. This is normally hard to see, but visible on Workboards with custom background colors.
- Fix an alignment issue with the little "V" caret in the search scope dropdown. This is a recent issue caused by some tab-caret CSS I added recently for tabbed dashboard panels.
Test Plan:
Before:
{F6367723}
After:
{F6367724}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20388
Summary:
See PHI1175. An install would like to trigger some reminders/guidance if users don't link revisions to JIRA issues.
Expose "JIRA Issue URIs" as a field so Herald can act on the presence or absence of issues.
I'm exposing "JIRA Issue URIs", not a field like "[ Has Jira Issue ][ is true ]", since it's a bit more flexible: you can use a regexp to test against particular `PROJ-123` project prefixes in JIRA, for example.
Test Plan: {F6367696}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20386
Summary:
Depends on D20383. Ref T13272. Fixes T12363. See PHI997. This gets the edit flows for tab panels functional again. They aren't //nice//, and a lot of the workflows are fairly janky: for example, most of them end up with you on the tab panel's page, which isn't useful if you started on a dashboard page.
However, these flows were extremely janky before anyway (see T12363) and I suspect this is a net improvement even though it's a bit of a mess. I anticipate cleaning this up bit-by-bit in future diffs.
Test Plan: {F6366372}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T12363
Differential Revision: https://secure.phabricator.com/D20384
Summary: Depends on D20384. Ref T13275. A bunch of this code got converted but I missed some callsites that aren't reached directly from the menu.
Test Plan:
- Visited each controller, saw actual pages instead of menu construction fatals.
- Grepped for `getProfileMenu()`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20385
Summary:
Depends on D20382. Ref T13272. When something near the edge of the screen has a dropdown menu, we currently may render the menu offscreen.
Instead, keep the menu onscreen.
(This is happening because I'm adding dropdown menus to tab query panels.)
Test Plan:
Before:
{F6363339}
After:
{F6363340}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20383
Summary: Depends on D20377. Ref T13272. In D20372, I temporarily removed the controls for actually editing Query panels. Restore them.
Test Plan:
- Viewed existing Query panels, saw them working like they did before.
- Created and edited Query panels.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20382
Summary:
Depends on D20376. Ref T8033. It's possible to put a bunch of secret panels on a public dashboard, and not obvious that the dashboard won't be very useful.
This was more of an issue long ago (when the dashboard broke or all the panels completely vanished or something?). Nowadays, the panels render "You don't have permission to view this" so it's likely easy to explain/fix. Still, we can warn about this.
But, for now, don't, since a lot of this works better now and it's not really clear that this is particularly valuable. We can revisit this after all the connected changes have more of a chance to settle.
Test Plan:
(Earlier behavior, not how things look in the final version.)
{F6335008}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8033
Differential Revision: https://secure.phabricator.com/D20377
Summary:
Depends on D20374. Panels may not be visible if they are restricted (no permission) or if they are invalid (e.g., the panel was deleted).
Render these as two separate states instead of one big combined state.
Test Plan: {F6334756}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20376
Summary:
Depends on D20373. Ref T13272. When you put Dashboards in Favorites, the render without a navigation menu, which is kind of weird.
Instead, make Favorites display a navigation menu. This effectively turns it into a weird cross between the home page and a portal, but so be it.
Also change the icon from "star" to "bookmark" since I think that a clearer hint about how it works.
Test Plan: Viewed dashboards in favorites, got a navigation menu. Edited items from portals, home, favorites.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20374
Summary:
Depends on D20372. Ref T13272.
- There's a very heavy dropshadow on panels right now that looks out of place. Reduce it a bit.
- Panels currently have unlabeled pencil and trash icons. Turn this into a menu. I'm likely planning to add options like "Change Query..." to this menu to make managing some types of panels easier.
Test Plan: {F6332838}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20373
Summary:
Depends on D20371. Ref T13272. Dashboard panels use CustomField to specify editable panel behavior. This is an older approach which was largely or entirely obsoleted by EditEngine.
Throw away all the CustomField edit stuff. Convert the "text" panel to EditEngine to prove this at least mostly works.
This breaks "query" panels and "tab" panels (they'll still work fine, but they can't be meaningfully edited). I'll restore those in a future change.
Test Plan: Created and edited a "text" panel.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20372
Summary:
Depends on D20370. Ref T13272. This tries to get panel editing fully on the newer "Modular Transactions" + "EditEngine" flow.
This breaks tab panels a bit, but I'll fix that in a followup. And they weren't exactly in great shape before.
Also makes the flow prettier. :3
Test Plan: {F6332746}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20371
Summary: Depends on D20369. Ref T13272. Move toward a world where we can edit panels with just one controller, instead of separate "Edit" and "Editpro" controllers.
Test Plan: Created and edited panels. This will get vetted more thoroughly after additional changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20370
Summary:
Depends on D20368. Ref T13272. Dashboards have a lot of controllers, try to organize them a little better.
Note "EditController" vs "EditproController". Yikes.
Test Plan: Loaded dashboards. No code changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20369
Summary:
Depends on D20367. Ref T13272. When an edit action is disabled, we add "workflow" so that the "You can't do this" message renders in a dialog instead of a separate page.
These actions are implemented in a nonstandard way; standardize them.
Test Plan: Clicked both actions as a user who could take them (got normal behavior); and as a user who could not (got permissions dialog errors).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20368
Summary:
Depends on D20364. Ref T13272. When you create a dashboard, we currently give you a modal choice between an empty dashboard and a "simple template" dashboard.
Remove this choice, and create an empty dashboard in all cases instead.
I think this template dashboard flow isn't terribly useful, and is partly covering over other deficiencies in the workflow. I'm fixing many of those and suspect we can get away without this now. Users on this flow also may not really know what they want. This also contributes to having a lot of extra unmoored panels floating around.
If we did rebuild this, I'd like to address more specific use cases and probably build it as "Add a Template Panel..." or similar, as an action you can use to quickly update an existing workboard. This would be a lot more flexible than create-a-whole-template-board.
Test Plan: Created a new board, no more "template: yes or no?" gate.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20367
Summary:
Depends on D20362. Ref T13272. Currently, Dashboards have an "Install Dashboard" flow which is pretty janky and only allows you to install things to the home page.
Instead, allow users to install things to any valid target (home, favorites, portals, projects). This also provides URIs like `dashboard/install/1/home/personal/` which allow you to link users to an "install a dashboard" page; this may or may not get used.
Test Plan: Installed dashboards on home, favorites, projects, and portals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20364
Summary:
Depends on D20361. Ref T13272. Currently, Dashboards have three separate modes: view, arrange, manage.
With the advent of Portals, I think we can simplify this, and make the dashboard view a combined view/edit/manage page. To view it in a cleaner standalone way, you can add it to a portal/home/project. I'll also improve the "Install" workflow.
Test Plan:
Viewed a dashboard page, clicked through all the actions, grepped for affected URIs.
{F6327027}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20362
Summary:
Ref T13269. Workboard triggers can now reassign tasks on column drop. Also sprinkles some `setViewer()` calls in places that needed them.
This mostly works, but a few issues:
* To set the owner to unassigned, you must explicitly put the "No Owner" token in the typeahead. Maybe this should just figure out you've put nothing in that field and set it for you?
* I'm pretty sure this was already broken, but if you change the rule type from a tokenizer to a different type, the default for the field doesn't populate correctly: {F6312227}
Also adds a new hook for trigger rules: `getValueForField($value)` which allows you to transform a value stored in the DB into a form suitable for setting on a form control.
Test Plan: Dragged tasks between columns and observed new owners as expected. Didn't try to get fancy to assign tasks to deleted users, users that the viewer can't see, bot users, etc etc. I'm relying on the underlying transaction to hopefully do the right thing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20329
Summary:
See <https://discourse.phabricator-community.org/t/call-to-undefined-method-phuipagerview-gethasmoreresults-in-2019-week-13/2586/>.
A small number of queries (including "Notifications" and (global) "Search") use offset-based pagers which have a slightly different API `PHUIPagerView` instead of `AphrontCursorPagerView`. This leads to a fatal in the new code for the "View All Results" buttons.
To fix this, just do an `instanceof` test. Some day we can unify the pagers.
Test Plan: Added a notifications panel, rendered it, saw it work instead of fataling on "getHasMoreResults()". Also rendered some normal panels.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20366
Summary:
See <https://discourse.phabricator-community.org/t/non-functional-actions-menu-on-live-phame-views/2593>. Several layers here:
The "Actions" button is broken because a menu behavior is failing, since we aren't rendering the menu.
When a behavior fails to initialize, catch and log the exception and continue. Previously, we stopped initializing behaviors if any failed, but behaviors are usually independent and continuing with an explicit exception seems reasonable.
Give "JX.log()" some "sprintf()" semantics to make logging the behavior failure easier. We can probably afford these extra 200 bytes now in 2019.
This fixes the button and gives us explicit errors in the log. So far, so good.
Then, when a page won't render chrome, don't try to render the main menu. This fixes the actual errors (we no longer try to initialize menu behaviors for nodes which don't exist).
Completely hide the "Actions" and "Comment" flows if the viewer isn't logged in. Although this isn't completely consistent with other applications, I think it's more appropriate for Phame. In applications like Maniphest, we show a full set of controls (but disable them) so that users who are not currently logged in have a clear path to interact with the content, under the assumption that this is a relatively common workflow. This is probably less common for Phame, where we expect most anonymous viewers not to log in or interact.
Finally, parametrize a one-off border color and add a border under the crumbs at the top of the page.
Test Plan:
- Viewed a "Live" Phame blog post page, clicked "Actions", got a dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20378
Summary:
Depends on D20360. Ref T13275. This makes the "Dashboards" application start on a Drydock-like console page where you pick portals, dashboards, or panels.
Probably the "Dashboards" application should either be renamed to "IntelliknowledgePro" or Portals should be split off into a separate application eventually, but let's see how things go like this for now, since restructuring probably breaks some URIs at least a little bit so I'd like more confidence that we're headed in the right direction before we do it.
Test Plan:
- Visited Dashboards via typeahead, got options for Dashboards/Portals/Panels.
- Visited Portals pages, got simplified crumbs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20361
Summary:
Depends on D20359. Fixes T12098. When you add a new "Form" item and pick "Create Revision", you currently get a bad link. This is because Differential is kind of special and the form isn't usable directly, even though Differential does use EditEngine.
Allow EditEngine to specify a different create URI, then specify the web UI paste-a-diff flow to fix this.
Test Plan:
- Added "Create Revision" to a portal, clicked it, was sensibly put on the diff flow.
- Grepped for `getCreateURI()`, the only other real use case is to render the "Create X" dropdowns in the upper right.
- Clicked one of those, still worked great.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12098
Differential Revision: https://secure.phabricator.com/D20360
Summary:
Depends on D20358. Fixes T12871. After refactoring, we can now tell when a "storage" menu item generated only disabled "display" menu items, and not pick any of them as the default rendering.
This means that if you're looking at a portal/menu with several dashboards, but can't see some at the top, you'll get the first one you can see.
Also clean up a lot of minor issues with less-common states.
Test Plan:
- Created a portal with two private dashboards and a public dashboard.
- Viewed it as another user, saw the default view show the dashboard I can actually see.
- Minor fix: Disabled and enabled the hard-coded "Home" item, now worked cleanly with the right menu state.
- Minor fix: added a motivator panel.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12871
Differential Revision: https://secure.phabricator.com/D20359
Summary:
Depends on D20357. Ref T13275. Now that there's a stronger layer between "stuff in the database" and "stuff on the screen", these subclasses all need to emit intermediate objects instead of raw, HTML-producing view objects.
This update is mostly mechanical.
Test Plan:
- Viewed Home, Favorites, Portals, User Profiles, Project Profiles.
- Clicked each item on each menu/profile type.
- Added every (I think?) type of item to a menu and clicked them all.
- Grepped for obsolete symbols (`newNavigationMenuItems`, `willBuildNavigationItems`).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20358
Summary:
Depends on D20356. Ref T13275. See also T12871 and T12949.
Currently, the whole "ProfileMenu" API operates around //stored// items. However, stored items are allowed to produce zero or more //display// items, and we sometimes want to highlight display item X but render stored item Y (as is the case with "Link" items pointing at `?filter=xyz` on Workboards).
For the most part, this either: doesn't work; or works by chance; or is kind of glued together with hope and prayer (as in D20353).
Put an actual structural layer in place between "stored/configured item" and "display item" that can link them together more clearly. Now:
- The list of `ItemConfiguration` objects (stored/configured items) is used to build an `ItemViewList`.
- This handles the selection/highlighting/default state, and knows which display items are related to which stored items.
- When we're all done figuring out what we're going to select and what we're going to highlight, it pops out an actual View which can build the HTML.
This requires API changes which are not included in this change, see next change.
This doesn't really do anything on its own, but builds toward a more satisfying fix for T12871. I'd hoped to avoid doing this for now, but wasn't able to get a patch I felt good about for T12871 built without fixing this first.
Test Plan: See next change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20357
Summary:
Depends on D20355. Ref T13275. Ref T13247. Currently, "Hamburger" menus are not automatically built from navigation menus. However, this is (I'm almost completely sure?) a reasonable and appropriate default behavior, and saves us some code around profile menus.
With this rule in place, we can remove `setApplicationMenu()` and `getApplicationMenu()` from `StandardPageView`, since they have no callers.
This also updates a lot of profile menu callsites to a new API which is added in the next change.
Test Plan: See the next two changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275, T13247
Differential Revision: https://secure.phabricator.com/D20356
Summary:
Depends on D20353. Ref T13275. This is just some small quality-of-life fixes:
- When you add items to menus, they currently go below the "Edit Menu/Manage Menu" links by default. This isn't a very good place for them. Instead, lock "edit" items to the bottom of the menu.
- Lock profile pictures to the top of the menu. This just simplifies things a little.
- Show more iconography hints on the "edit menu items" UI.
- Add a "drag stuff to do things" hint if some stuff can be dragged.
Test Plan:
- Added new items to a Portal, they didn't go to the very bottom. Instead, they went above the "Edit/Manage" links; a sensible place for them.
- Viewed the "edit menu items" screen, saw more hints and visual richness.
- Viewed/edited Home, Projects, Portals, Favorites
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20355
Summary:
Depends on D20352. Fixes T12949. If a user adds a link (for example, to a workboard) that takes you to the same page but with some URI parameters, we'd prefer to highlight the "link" item instead of the default "workboard" item when you click it.
For example, you add a `/query/assigned/` "link" item to a workboard, called "Click This To Show Tasks Assigned To Me On This Workboard", i.e. filter the current view.
This is a pretty reasonable thing to want to do. When you click it, we'd like to highlight that item to show that you've activated the "Assigned to Me" filter you added.
However, we currently highlight the thing actually serving the content, i.e. the "Workboard" item.
Instead:
- When picking what to highlight, look through all the items for one with a link to the current request URI.
- If we find one or more, pick the one that would be the default.
- Otherwise, pick the first one.
This means that you can have several items like "?a=1", "?a=2", etc., and we will highlight them correctly when you click them.
This actual patch has some questionable bits (see some discussion in T13275), but I'd like to wait for stronger motivation to refactor it more extensively.
Test Plan:
- On a portal, added a `?a=1` link. Saw it highlight properly when clikced.
- On a workboard, added a link to the board itself with a different filter. Saw it highlight appropriately when clicked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12949
Differential Revision: https://secure.phabricator.com/D20353
Summary:
Depends on D20349. Ref T13275. Currently, a default item is selected as a side effect of generating the full list of items, for absolutely no reason.
The logic to pick the currently selected item can also be separated out pretty easily.
(And fix a bug in with a weird edge case in projects.)
This doesn't really change anything, but it will probably make T12949 a bit easier to fix.
Test Plan: Viewed Home / projects / portals, clicked various links, got same default/selection behavior as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20352
Summary:
Depends on D20348. Ref T13275. Portals are mostly just a "ProfileMenuEngine" menu, and that code is already relatively modular/flexible, so set that up to start with.
The stuff it gets wrong right now is mostly around empty/no-permission states, since the original use cases (project menus) didn't have any of these states: it's not possible to have a project menu with no content.
Let the engine render an "empty" state (when there are no items that can render a content page) and try to make some of the empty behavior a little more user-friendly.
This mostly makes portals work, more or less.
Test Plan: {F6322284}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20349
Summary:
Ref T13275. Today, you can build a custom page on the home page, on project pages, and in your favorites menu.
PHI374 would approximately like to build a completely standalone custom page, and this generally seems like a reasonable capability which we should support, and which should be easy to support if the "custom menu" stuff is built right.
In the near future, I'm planning to shore up some of the outstanding issues with profile menus and then build charts (which will have a big dashboard/panel component), so adding Portals now should let me double up on a lot of the testing and maybe make some of it a bit easier.
Test Plan:
Viewed the list of portals, created a new portal. Everything is currently a pure skeleton with no unique behavior.
Here's a glorious portal page:
{F6321846}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20348
Summary:
There are two issues here I was trying to fix:
* Viewing `/conpherence` by logged out users on `secure` would generate an overheated query on `ConpherenceThreadQuery` `secure` has a ton of wacky threads with bogus names.
* When a user views a specific thread that they don't have permission to see, we attempt to fetch the thread's transactions before applying policy filtering. If the thread has more than 1000 comments, that query will also overheat instead of returning a policy exception.
I fixed the first problem, but started trying to fix the second by moving the transaction fetch to `didFilterPage` but it broke in strange ways so I gave up.
Also fix a dangling `qsprintf` update.
Test Plan: Loaded threads and the Conpherence homepage with and without logged in users.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20375
Summary:
See PHI1185, which reports a performance issue with "(" in remarkup in certain contexts.
I can't reproduce the performance issue, but I can reproduce the autosuggester incorrectly remaining active and swallowing return characters.
When the user types `(` or `[`, we wait for a prefix for the `((` (Phurl) or `[[` (Phriction) rules. We currently continue looking for that prefix until a character is entered that explicitly interrupts the search.
For example, typing `(xxx<return>` does not insert a return character, because we're stuck on matching the prefix.
Instead, as soon as the user has entered text that we know won't ever match the prefix, deactivate the autocomplete. We can slightly cheat through this by just looking for at least one character of text, since all prefixes are exactly one character long. If we eventually have some kind of `~~@(xyz)` rule we might need to add a more complicated piece of rejection logic.
Test Plan: Typed `(xxx<return>`, got a return. Used `((` and `[[` autosuggest rules normally. Used `JX.log()` to sanity check that nothing too crazy seems to be happening.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20365
Summary: See PHI985. The layers above this may return `array()` to mean "one hunk with a line-1 offset". Accept either `array()` or `array(1 => ...)` to engage the scope engine.
Test Plan: See PHI985.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20363
Summary:
See PHI1182. Ref T13266. The recent fixes didn't quite cover the case where you have a query, but order by something other than relevance, and page forward.
Refine the tests around building/selecting these columns and paging values a little bit to be more specific about what they care about.
Test Plan:
Executed queries, then went to "Next Page", for:
- query text, non-relevance order.
- query text, relevance order.
- no query text, non-relevance order.
- no query text, relevance order.
Also, made an API call similar to the one in PHI1182.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13266
Differential Revision: https://secure.phabricator.com/D20354
Summary: See PHI1180. Currently, when we failover to a replica, we may not log the failure. Failovers are serious business and bad news, so emit a log even if we are able to connect to the replica.
Test Plan:
Configured a bogus master and a good replica:
```
$ ./bin/mail list-outbound
[2019-03-29 16:26:09] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:26:19] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:26:29] EXCEPTION: (PhutilProxyException) Failed to connect to master database ("local_config"), failing over into read-only mode. {>} (AphrontConnectionQueryException) Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out. at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:362]
<...snip backtrace...>
3945 Voided email rP04f9e72cbd10: Don't subscribe bots implicitly when they act on objects, or when they are…
3946 Voided email rPdf53d72e794c: Allow "Move Tasks to Column..." to prompt for MFA
3947 Voided email rP492b03628f19: Fix a typo in Drydock "Land" operations
3948 Voided email rPb469a5134ddd: Allow "SMTP" and "Sendmail" mailers to have "Message-ID" behavior configured in…
3949 Voided email rPa6fd8f04792d: When performing complex edits, pause sub-editors before they publish to…
...
```
Configured a bogus master and a bogus replica:
```
$ ./bin/mail list-outbound
[2019-03-29 16:26:57] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:07] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:27] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.3 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:37] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.3 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:47] EXCEPTION: (PhabricatorClusterStrandedException) Unable to establish a connection to any database host (while trying "local_config"). All masters and replicas are completely unreachable.
AphrontConnectionQueryException: Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out. at [<phabricator>/src/infrastructure/storage/lisk/PhabricatorLiskDAO.php:177]
<...snip backtrace...>
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20351
Summary:
See <https://discourse.phabricator-community.org/t/duo-broken-in-2019-week-12/2580/>.
The "live update Duo status" endpoint currently requires full sessions, and doesn't work from the session upgrade gate on login.
Don't require a full session to check the status of an MFA challenge.
Test Plan: Went through Duo gate in a new session, got a live update.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20347
Summary: Depends on D20345. Use a narrower layout for very large graphs to save some space.
Test Plan:
Before:
{F6320215}
After:
{F6320216}
This does not affect smaller graphs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20346
Summary:
See downstream <https://phabricator.wikimedia.org/T171648>. The `T123 Task Name` column in graphs can currently fold down to 0 pixels wide.
Although it's visually nice to render this element without a scroll bar when we don't really need one, the current behavior is excessive and not very useful.
Instead, tweak the CSS so:
- This cell is always at least 320px wide.
- After 320px, we'll overflow/ellipsis the cell on small screens.
This generally gives us better behavior:
- Small screens get a scrollbar to see a reasonable amount of content.
- The UI doesn't turn into a total mess if one task has a whole novel of text.
Test Plan:
Old behavior, note that there's no scrollbar and the cell is so narrow it is useless:
{F6320208}
New behavior, same default view, has a scrollbar:
{F6320209}
Scrolling over gives you this:
{F6320210}
On a wider screen (this wide or better), we don't need to scroll:
{F6320211}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20345
Summary:
Fixes T13273. This element is a bit weird, but I think I fixed it without breaking anything.
The CSS is used by project hovercards and user hovercards, but they each have a class which builds mostly-shared-but-not-really-identical CSS, instead of having a single `View` class with modes. So I'm not 100% sure I didn't break something obscure, but I couldn't find anything this breaks.
The major issue is that all the text content has "position: absolute". Instead, make the image "absolute" and the text actual positioned content. Then fix all the margins/padding/spacing/layout and add overflow. Seems to work?
Plus: hide availability for disabled users, for consistency with D20342.
Test Plan:
Before:
{F6320155}
After:
{F6320156}
I think this is pixel-exact except for the overflow behavior.
Also:
- Viewed some other user hovercards, including a disabled user. They all looked unchanged.
- Viewed some project hovercards. They all looked good, too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13273
Differential Revision: https://secure.phabricator.com/D20344
Summary:
See downstream <https://phabricator.wikimedia.org/T201480>. Searching for things on mobile is a significant challenge because clicking the "Magnifying Glass" icon shows and then immediately hides the menu. I believe some aspect of iOS event handling has changed since this was originally written.
At some point, I'd like to rewrite this to work more cleanly and get rid of `jx-toggle-class`. In particular, it isn't smart enough to know that it should be modal with other menus, so you can get states like this by clicking multiple things:
{F6320110}
This would also probably just look and work better if it was an inline element that showed up under the header instead of a floating dropdown element.
However, I'm having a hard time getting the Safari debugger to actually connect to the iOS simulator, so take a small step toward this bright future and fix the immediate problem for now: toggle on click instead of mousedown/touchstart.
This means the menu opens ~100ms later, but actually works. Big improvement!
I'd like to move away from "jx-toggle-class" anyway (it usually isn't sophisticated enough to fully describe a behavior) so reducing complexity here seems good. It isn't used in //too// many places so this is unlikely to have any negative effects, I hope.
Test Plan: On iOS simulator, clicked the magnifying glass icon in the main menu to get a search input. Before: got a search input for a microsecond. After: actually got a search input.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20343
Summary:
See downstream <https://phabricator.wikimedia.org/T138723>. That suggestion is a little light on details, but I basically agree that showing "Availability: Available" on disabled user profiles is kind of questionable/misleading.
Just hide event information on disabled profiles, since this doesn't seem worth building a special "Availability: Who Knows, They Are Disabled, Good Luck" disabled state for.
Test Plan: Looked at disabled and non-disabled user profiles, saw Calendar stuff only on the former.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20342
Summary: Ref T13266. Caught one more of these "directly setting afterID" issues in the logs.
Test Plan: Ran `bin/search index --type ConpherenceThread` before and after changes. Before: fatal about a direct call. After: clean index rebuild.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13266
Differential Revision: https://secure.phabricator.com/D20341
Summary:
Ref PHI1173. Currently, you can edit an MFA'd comment without redoing MFA. This is inconsistent with the intent of the MFA badge, since it means an un-MFA'd comment may have an "MFA" badge on it.
Instead, implement these rules:
- If a comment was signed with MFA, you MUST MFA to edit it.
- When removing a comment, add an extra MFA prompt if the user has MFA. This one isn't strictly required, this action is just very hard to undo and seems reasonable to MFA.
Test Plan:
- Made normal comments and MFA comments.
- Edited normal comments and MFA comments (got prompted).
- Removed normal comments and MFA comments (prompted in both cases).
- Tried to edit an MFA comment without MFA on my account, got a hard "MFA absolutely required" failure.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20340
Summary:
See downstream <https://phabricator.wikimedia.org/T209449>.
The "Bulk Edit" flow works with `setContinueOnMissingFields(true)`, so `newRequiredError()` errors are ignored. This allows you to apply a transaction which changes the title to `""` (the empty string) without actually hitting any errors which the workflow respects.
(Normally, `setContinueOnMissingFields(...)` workflows only edit properties that can't be missing, like the status of an object, so this is an unusual flow.)
Instead, validate more narrowly:
- Transactions which would remove the title get an "invalid" error, which is respected even under "setContinueOnMissingFields()".
- Then, we try to raise a "missing/required" error if everything otherwise looks okay.
Test Plan:
- Edited a task title normally.
- Edited a task to remove the title (got an error).
- Created a task with no title (disallowed: got an error).
- Bulk edited a task to remove its title.
- Before change: allowed.
- After change: disallowed.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20339
