Summary:
Fixes T13539. See that task for discussion and a reproduction case.
This algorithm currently counts "\ No newline at end of file" lines as though they were normal source lines. This can cause offset issues in the rare case that a diff contains two of these lines (for each side of the file) and has changes between them (because the last line of the file was modified between the diffs).
Instead, don't count "\" as a display line.
Test Plan:
- See T13539 and PHI1740.
- Before: got fatals on the "wild" diff and the synthetic simplified version.
- After: clean intradiff rendering in both cases.
Maniphest Tasks: T13539
Differential Revision: https://secure.phabricator.com/D21267
Summary:
Ref T13538. See PHI1739. Synthetic Git commits with no author and/or no commit message currently extract `null` and then fail to parse.
Ideally, we would carefully distinguish between `null` and empty string. In practice, that requires significant schema changes (these columns are non-nullable and have indexing requirements) and these cases are degenerate. These commits are challenging to build and can not normally be constructed with `git commit`.
At least for now, merge the `null` cases into the empty string cases so we can survive import.
Test Plan:
- Constructed a commit with no author and no commit message using the approach described in T13538; pushed and parsed it.
- Before: fatals during identity selection and storing the commit message (both roughly NULL inserts into non-null columns).
- After: clean import.
This produces a less-than-ideal UI in Diffusion, but it doesn't break anything:
{F7492094}
Maniphest Tasks: T13538
Differential Revision: https://secure.phabricator.com/D21266
Summary:
Fixes T13536. See that task for discussion.
Older versions of MySQL (roughly, prior to 8.0.19) emit "int(10)" types. Newer versions emit "int" types. Accept these as equivalent.
Test Plan: Ran `bin/storage upgrade --force` against MySQL 8.0.11 and 8.0.20. Got clean adjustment lists on both versions.
Maniphest Tasks: T13536
Differential Revision: https://secure.phabricator.com/D21265
Summary: On the "New User" web workflow, if you use an invalid email address, you get a failure with an empty message.
Test Plan:
- Before: Tried to create a new user with address "asdf". Got no specific guidance.
- After: Got specific guidance about email address formatting and length.
Differential Revision: https://secure.phabricator.com/D21264
Summary:
Ref T13529. Now that instances can be renamed, an instance may have multiple valid SSH usernames and the preferred SSH username may not be the intenal instance name.
`PhacilitySiteSource` should already always set `diffusion.ssh-username` correctly, to the current preferred SSH username (which may be "new-name" after a rename from "old-name"), so we should never be able to reach this code without an accurate `diffusion.ssh-username` value available.
The code to resolve names into instances also already works for both "ssh old-name@..." and "ssh new-name@...".
So I believe this code has no beneficial effects and only causes harm: it may force us to return "old-name" when falling through would correctly return "new-name".
Test Plan:
- Previously: renamed an instance, then SSH'd to it using both the old and new names. Both work.
- Previously: verified that `diffusion.ssh-username` is set correctly after a rename.
- Verified that Diffusion "Clone" UI now shows "new-name" after an instance rename.
- The real question here is: does this break something I'm not thinking of? And the change probably has to go to production to answer that.
Maniphest Tasks: T13529
Differential Revision: https://secure.phabricator.com/D21259
Summary:
Ref T13513. The way I'm highlighting lines won't work for Jupyter notebooks or other complex content blocks, and I don't see an obvious way to make it work that's reasonably robust.
However, we can just ignore the range behavior for complex content and treat the entire block as selected. This isn't quite as fancy as the source behavior, but pretty good.
Also, adjust unified diff behavior to work correctly with highlighting and range selection.
Test Plan:
- Used range selection in a Jupyter notebook, got reasonable behavior (range is treated as "entire block").
- Used range selection in a unified diff, got equivalent behavior to 2-up diffs.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21257
Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary: Ref T13513. Support direct text selection for inlines. This is currently just an alternate way to get to the same place as using line numbers, but can preserve offset/range information in the future.
Test Plan:
- Selected some text, hit "c", clicked "New Inline Comment", got sensible comments on both sides of a diff in Safari, Chrome, and (with limitations) Firefox.
- Caveats: no unified support, doesn't work across lines in Firefox.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21248
Summary:
Ref T13454. See <https://discourse.phabricator-community.org/t/newly-created-ssh-private-keys-with-passphrase-not-working-anymore/3883>.
After changes to distinguish between invalid and passphrase-protected keys, SSH private key management code incorrectly uses "-y ..." ("print public key") when it means "-p ..." ("modify input file, removing passphrase"). This results in the command having no effect, and Passphrase stores the raw input credential, not the stripped version.
We can't recover the keys because we don't store the passphrase, so no migration here is really possible. (We could add more code to detect this case, but it's presumably rare.)
Also, correct the behavior of the "Show Public Key" action: this is available for users who can see the credential and does not require edit permission.
Test Plan:
- Created a new credential with a passphrase, then showed the public key.
Maniphest Tasks: T13006, T13454
Differential Revision: https://secure.phabricator.com/D21245
Summary:
Ref T13513. Currently, viewing a Jupyter document, hidden context just gets a plain "* * *" facade with no way to expand it.
Support click-to-expand, like source changes.
Test Plan:
- Clicked to expand various Jupyter diffs.
- Clicked to expand normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21243
Summary:
Ref T13513. If you leave an inline on line 20 of a Jupyter document, we currently render context around *raw* line 20, which is inevitably some unrelated piece of JSON.
Instead, drop this context. (Ideal behavior would be to render context around Jupyter block 20, but that's a whole lot of work.)
Test Plan:
- On Jupyter changes and normal source changes, made and submitted inline comments, then viewed text and HTML mail.
- Saw no context on Jupyter comments (instead of bad context), and unchanged behavior (useful context) on normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21242
Summary:
Ref T13513. Currently, "View as Document Type..." lists every available engine.
This is hard to get completely right because we can't always rebuild the document ref accurately in the endpoint, but try harder to fake something reasonable.
Test Plan: Used "View as Document Type..." on Jupyter notebooks, was given "Jupyter" and "Source" as options.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21241
Summary:
Ref T13513. As part of inline metadata, save the document engine the change is being rendered with.
This will allow other parts of the UI to detect that an inline was created on a Jupyter notebook but is being rendered on raw source, or whatever else.
The immediate goal is to fix nonsensical inline snippet rendering in email on Jupyter notebooks.
Test Plan:
- Created inlines and replies on normal soure code, saw no document engine annotated in the database.
- Created inlines and replies on a Jupyter notebook rendered in Jupyter mode, saw "jupyter" annotations in the database.
- Swapped document engines between Jupyter and Source, etc.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21240
Summary:
Ref T13513. If an intradiff has at least one unchanged file ("hasSameEffectAs()") or more than 100 files ("Large Change"), we hit this block and don't upcast storage inlines to runtime inlines. I missed this in testing.
Add the conversion step.
Test Plan: Viewed an intradiff with at least one unchanged file and at least one inline comment, saw correct rendering instead of fatal.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21239
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13513. Currently, if you:
- click a line to create an inline;
- type some text;
- wait a moment; and
- close the page.
...you don't get an "Unsubmitted Draft" marker in the revision list.
Lift all the draft behavior to "InlineController" and make saving a draft dirty the overall container draft state.
Test Plan:
- Took the steps described above, got a draft state marker.
- Created, edited, submitted, etc., inlines in Diffusion and Differential.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21235
Summary: Ref T13513. All queries now go through a reasonably minimal set of pathways and should have consistent behavior.
Test Plan:
- Loaded a revision with inlines.
- Created a new empty inline, reloaded page, saw it vanish.
- Created a new empty inline, typed draft text, did not save, reloaded page, saw draft present.
- Created a new empty inline, typed draft text. Submitted feedback, got prompt, answered "Y", saw draft text submit.
- Created a new empty inline, typed draft text, scrolled down to bottom of page, typed non-draft text, saw preview include draft text.
- Marked and submitted "Done".
- Used hide/show on inlines, verified state persisted.
- Did much of the same stuff in Diffusion, where it all works the same way (except: there's no prompt when submitting draft is-editing inlines).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21234
Summary: Ref T13513. Replaces "DifferentialInlineCommentQuery" with the similar but more modern "DifferentialDiffInlineCommentQuery".
Test Plan: Viewed comments in timeline, changesets. Created, edited, and submitted comments. Hid and un-hid comments, reloading (saw state preserved).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21233
Summary: Ref T13513. Continue removing usage sites for the obsolete "DifferentialInlineCommentQuery".
Test Plan: Viewed the inline list in Differential, saw sensible inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21232
Summary: Ref T13513. Move querying to "DiffInlineCommentQuery" classes and lift them into the base Controller.
Test Plan: In Differential and Diffusion, created, edited, and submitted inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21231
Summary: Ref T13513. Another step closer to the light.
Test Plan: Created, edited, deleted, replied to, and submitted inline comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21230
Summary: Ref T13513. Continue marching toward coherent query pathways for all access to inline comments.
Test Plan:
- Viewed a commit and a path within that commit, as a user with unpublished inlines and a different user.
- Saw appropriate inlines in all cases (published inlines, plus undeleted unpublished inlines authored by the current viewer).
- Grepped for "loadDraftAndPublishedComments()".
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21228
Summary:
Ref T13513. Improve consistency and robustness of the "InlineComment" queries.
The only real change here is that these queries now implicitly add a clause for selecting inlines ("pathID IS NULL" or "changesetID IS NULL").
Test Plan: Browed, created, edited, and submitted inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21227
Summary:
Ref T13513. Currently, inline storage objects ("TransactionComment") can't directly generate a runtime object ("InlineComment").
Allow this transformation to be performed in a genric way so clunky code which does it per-object-type can be removed, lifted, or simplified.
Simplify an especially gross callsite in preview code.
Test Plan: Previewed inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21226
Summary: Ref T13513. See that task for some discussion. This prepares to lift "loadUnsubmittedInlineComments(...)" into shared code.
Test Plan: Grepped for callers, found none in the upstream. This is a backward compatibilty break. See T13513.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21225
Summary: Ref T13513. This controller was obsoleted by EditEngine and appears unreachable without explicitly typing the URL.
Test Plan:
- Grepped for the route, didn't find any hits.
- Deleted the controller, successfully previewed comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21224
Summary:
Ref T13519. This is a little fuzzy, but I think the workflow here is:
- View an intradiff, generating an ephemeral comparison changeset with no changeset ID. This produces a state key of "*".
- Apply "hidden" state changes to the changeset.
- View some other intradiff and/or diff view.
- The code attempts to use "*" as a changset ID?
I'm not entirely sure this is accurate; this was observed in production and I couldn't get a clean reproduction case locally.
Optimistically, try making changeset IDs explicit rather than relying on state keys to be "usually changeset-ID-like".
Test Plan: Used "hidden" locally across multiple intradiffs, but I wasn't cleanly able to reproduce the initial issue.
Maniphest Tasks: T13519
Differential Revision: https://secure.phabricator.com/D21223
Summary: Ref T13523. If a file hasn't been touched in the newer changeset, we can currently hit an error in the interdiff.
Test Plan:
- Touched "moo.txt" in Diff 1.
- Reverted the changes to "moo.txt" in Diff 2.
- Diffed 2 vs 1.
- Before patch: fatal (call to getFilename() on null).
- After patch: clean interdiff.
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21220
Summary: Ref T13513. When users choose to publish inlines, we want to publish the visible text, not the last "checkpointed" state.
Test Plan:
- Created an inline ("AAA").
- Edited it into "BBB", did not save.
- Submitted.
- Confirmed that I want to publish the unsaved inline.
- Saw "BBB" publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21218
Summary:
Ref T13513. As users type text into inline comments, save the comment state as a draft on the server.
This has some rough edges, particularly around previews, but mostly works. See T13513 for notes.
Test Plan: Started an inline, typed some text, waited a second, reloaded the page, saw an editing inline with the saved text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21216
Summary: Ref T13513. When computing whether a revision has draft comments or not, ignore empty inlines.
Test Plan: Added empty inlines to a revision, no longer saw a yellow "draft" bubble in the list UI.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21215
Summary: Ref T13513. When you load a changeset, discard all empty inlines. This is likely a more desirable behavior than keeping empty editors around, even though the rest of the pipeline generally handles them fairly well now.
Test Plan:
- Started an inline, didn't type any text or save, reloaded page.
- Before: page restores empty editor in the same place.
- After: we just discard this likely-pointless empty inline.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21214
Summary:
Ref T13513. Currently, if you start an inline and then submit overall comments, we publish an empty inline. This is literally faithful to what you did, but almost certainly not the intent.
Instead, simply ignore empty inlines at publishing time (and ignore "done" state changes for those comments).
We could delete them outright, but if we do, they'll break if you have another window open with the empty inline (since the stored comment won't exist anymore). At least for now, leave them in place.
Test Plan: Created empty inlines, submitted comments, no longer saw them publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21211
Summary: Ref T13513. This slightly expands the existing-but-hacky "warning" workflow to cover both "mentions on draft" and "submitting inlines being edited".
Test Plan:
- Submitted changes to a revision with mentions on a draft, inlines being edited, both, and neither.
- Got sensible warnings in the cases where warnings were appropriate.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21191
Summary:
Ref T13513. If you submit top-level comments while an inline comment editor is open, kick the comment out of the editing state.
(An improvement to this behavior would be to warn the user that we're going to do this first, but this is currently less straightforward.)
Test Plan:
- Clicked a line number to create an inline.
- Type text, save, click edit.
- (Optional: reload page.)
- Save changes overall using the form at the bottom of the page.
- Outcome: published inline is no longer in an "editing" state.
Weirdness:
- If you click a line number (and, optionally, type text), then submit without using "Save", the server-side version of the inline has no content.
- This gives you a no-effect warning. Instead, these inlines should probably just be marked as deleted somewhere in the pipeline.
- This saves the last "Saved" copy of the inline. That's (probably?) desired, but somewhat destructive without a warning.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21188
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
Summary: Ref T13513. This plans for "currently editing", character range comments, code suggestions, document engine tracking. And absolutely nothing else.
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Created and submitted some inline comments; nothing exploded.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21184
Summary:
Ref T13523. In the caching layer, there's a tricky clause about filetypes that skips some body rendering behavior.
Provide file type information which at least has a better chance of representing all changes (e.g., an image file may be replaced with a text file, but this can not be represented by a single file type).
Formalize "hasSourceTextBody()", to mean the changeset parser should engage the change as source text.
Test Plan: Intradiffed text changes, saw the body render properly.
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21210
Summary:
See PHI1722, which requests transaction details about reviewer changes.
This adds them; they're structured to be similar to "projects" and "subscribers" transactions and the "reviewers" attachment on revisions.
Test Plan: {F7410675}
Differential Revision: https://secure.phabricator.com/D21207
Summary: This supports the IntelliJ IDEA editor.
Test Plan:
- Looked at the editor settings panel, saw "idea://".
- Set my editor pattern to "idea://a?b".
- (Did not actually install IntelliJ IDEA.)
Differential Revision: https://secure.phabricator.com/D21206
Summary: Ref T13528. Now that we're hinting users into Files, put the content first and move the detail panel under it. Move the most-useful details (author, size, dimensions) into the curtain.
Test Plan: {F7409925}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21201
Summary:
Ref T13528. Paste data is stored in files, but the files are always named "raw.txt".
Now that Paste provides a hint to use Files for "DocumentEngine" rendering, try to use the same name as the paste instead.
Test Plan:
- Created a paste named "staggering-insight.ipynb".
- Clicked "View as Jupyter Notebook" from Paste.
- Saw a file named "staggering-insight.ipynb", not "raw.txt".
- Created a paste with no name, saw a file named "raw-paste-data.txt" get created.
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21197
Summary: Ref T13528. When a file in Paste (like a Jupyter notebook) has a good/useful document engine, provide a link to Files.
Test Plan: {F7409881}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21196
Summary:
See PHI1719. User agents making hard-coded requests to "/favicon.ico" currently 404. This is a mild source of log noise, and we can reasonably route this request.
Limitations:
- This only routes the "PlatformSite". Other sites (custom Phame blogs, third-party sites, Phurl redirectors) won't route here for now.
- This returns a "Location:" redirect to the correct resource rather than icon data directly. This produces the right icon with the right caching behavior, and returning icon data directly is difficult in the general case. However, it won't perform/cache as well as a direct response would.
Test Plan:
- Visted `/favicon.ico`.
- Before: 404.
- After: redirect to favicon.
Differential Revision: https://secure.phabricator.com/D21195
Summary:
Ref T13526. Currently, if a build plan is restricted, viewers may fatal when trying to view related builds.
The old behavior allowed them to see the build even if they can not see the build plan. This is sort of incoherent, but try to stabilize things before fixing this.
Test Plan:
This is a muddy change.
- Created a build with a build plan that Alice can't see.
- As Alice, viewed the build page (restricted before, restricted after); the buildable page (fatal before, works after).
- Also viewed a revision page (works before and after, but user-reported fatal).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13526
Differential Revision: https://secure.phabricator.com/D21194
Summary:
See PHI1714. This code is incorrectly rendering the chart panel twice, sort of, and passing a non-View object to rendering.
After D21044, this fatals by raising an exception in rendering.
Test Plan: Loaded page, no more exception.
Differential Revision: https://secure.phabricator.com/D21185
Summary:
Ref T13520. Generally, make the table of contents look and more like the paths panel:
- Show a hierarchy, with compression for single-sibling children.
- Use the same icons, instead of "M D" and "(img)" stuff.
- Use EditDistanceMatrix to do a piece-by-piece diff of paths changes.
- Show path changes within the path list.
I'm not entirely sold on this, but it was complicated to write and I've never heard the term "sunk cost fallacy". I think this is mostly a net improvement, but may need some adjustments and followup.
Test Plan: Viewed various changes in Differential and Diffusion, saw a more usable table of contents.
Maniphest Tasks: T13520
Differential Revision: https://secure.phabricator.com/D21183
Summary:
See <https://discourse.phabricator-community.org/t/runtimeexception-during-import-of-commit/3801>. When importing commits with "Auditors:", a raw transaction new value (with an edge edit map using a "+" key) may be passed as an unmentionable PHID list.
Instead, pass an actual PHID list.
Test Plan:
- Pushed a commit with "Auditors: duck".
- Ran daemons.
- Before patch: umentionable PHID exception.
- After patch: clean commit import.
- Verified "duck" was added as an auditor.
Differential Revision: https://secure.phabricator.com/D21181
Summary:
Ref T13523. Currently, when building a "comparison" changeset, metadata is taken from the left changeset. This is somewhat arbitrary.
This means that intradiffs of images don't work properly because the rendered changeset has only the left (usually "old") information.
Later, some of the code attempts to ignore the file data stored on the changeset and reconstruct the correct file data, which is how the result ends up not-completely-wrong.
Be more careful about building sensible-ish metadata, and then just use it directly later on. This fixes the "spooky" code referencing D955 + D6851.
There are some related issues, where "change type" and "file type" are selected arbitrarily and then used to determine whether the change has an "old/new" state or not (i.e., is the left side of the diff empty, since the change creates the file)?
In many cases, neither of the original changesets have a "change type" which will answer this question correctly. Separate this concept from "has state" from "change type", and make more of the code ask narrower questions about the specific conditions or states it cares about, rather than "change type".
Test Plan:
- Created a revision with Diff 1, Diff 2, and Diff 3. Diff 1 takes an image from "null -> A". Diff 2 takes the same image from "null -> B". Diff 3 takes the same image from "A -> B'.
- Intradiffed 1v2 and 1v3.
- Before patch:
- Left side usually missing, which is incorrect (should always be "A").
- Change properties are a mess ("null -> image/png" for MIME type, e.g.)
- Uninteresting/incorrect "unix:filemode" stuff.
- After patch;
- Left side shows state "A".
- Change properties only show size changes (which is correct).
{F7402012}
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21180
Summary:
Ref T13524. If a Harbormaster lint message has no line number (which is permitted), we try to access an invalid index here. This is an exception after D21044.
Treat comments with no line number as unchanged. These comments do not have "ghost" behavior and do not port across diffs.
Test Plan:
- Used "harbormaster.sendmessage" to submit lint with no line number on a changeset.
- Viewed changeset.
- Before patch: "Undefined index: <null>" error.
- After patch: Clean changeset with lint message.
{F7400072}
Maniphest Tasks: T13524
Differential Revision: https://secure.phabricator.com/D21178
Summary:
See PHI1710. Python encodes `True` as `True` (with an uppercase "T") when building URLs.
We currently do not accept this as a "truthy" value, but it's reasonable and unambiguous. Accept "True", "TRUE", "tRuE", etc.
Test Plan: Made a cURL conduit call with "True" and "tRuE". Before patch: failure to decoded booleans; after patch: successful interpretation of "true" variations.
Differential Revision: https://secure.phabricator.com/D21177
Summary: See PHI1710. Until D21044, some transactions could omit "value" and apply correctly. This now throws an exception when accessing `$xaction['value']`. All transactions are expected to have a "value" key, so require it explicitly rather than implicitly.
Test Plan: Submitted a transaction with a "type" but no "value". After D21044, got a language-level exception. After this change, got an explicit exception.
Differential Revision: https://secure.phabricator.com/D21176
Summary: Ref T13522. When changesets update an image, we currently compute no effect hash. A content hash of the image (or other binary file) is a reasonable effect hash, and enalbes effect-hash-based behavior, including hiding files in intradiffs.
Test Plan:
- Created a revision affecting `cat.png` and `quack.txt` (currently, there must be 2+ changesets to trigger the hide logic).
- Updated it with the exact same changes.
- Viewed revision:
- Saw the image renderered in the interdiff.
- Applied patch.
- Ran `bin/differential rebuild-changesets ...`.
- Viewed revision:
- Saw both changesets collapse as unchanged.
Maniphest Tasks: T13522
Differential Revision: https://secure.phabricator.com/D21174
Summary: Ref T13518. See <https://discourse.phabricator-community.org/t/more-exceptions-when-viewing-diffs/3789/>. Under PHP 7.4, accessing an array index of values like `false` and `null` is no longer valid. This is great, but we occasionally do it.
Test Plan:
- Upgraded to PHP 7.4.
- Loaded revisions with added/changed lines, inlines, and Asana support configured.
- Before patch: saw various fatals around accessing indexes of booleans and nulls.
- After patch: clean revision.
Maniphest Tasks: T13518
Differential Revision: https://secure.phabricator.com/D21172
Summary:
Ref T13493. At time of writing, the old API method no longer functions: `1/session` does not return an `accountId` but all calls now require one.
Use the modern `3/myself` API instead. The datastructure returned by `2/user` (older appraoch) and `3/myself` (newer approach) is more or less the same, as far as I can tell.
Test Plan: Linked an account against modern-at-time-of-writing Atlassian-hosted JIRA.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21170
Summary:
Ref T13455. Viewstates are fairly small and will probably grow less quickly than the changeset table, but the data is also not important to retain in the long term: if you revisit a change several months after hiding some files, it's fine if we've forgotten that you adjusted the view parameters.
Add a GC with a long default collection policy (180 days) so installs can manage the size of this table if it becomes necessary.
Test Plan: Ran via `bin/garbage` to adjust the GC policy and collect viewstates.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21164
Summary: Ref T13516. Hide this UI on devices without the screen width to reasonably support it.
Test Plan: Viewed a revision at various window widths, saw the elements vanish at device widths and reappear at desktop widths.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21162
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13516. Minor improvements here:
- Show key commands in the "View Options" dropdown.
- Organize it slightly better.
- Improve disabled item behaviors a little bit.
- Add a "Browse Directory" action.
- Rename "...in Diffusion" to "...in Repository".
- Make "d", "D", and "h" use the same targeting rules as "\".
- When you hide a file with the "h" menu item, select it.
Test Plan: Poked at the menu a lot, ran into less questionable behavior.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21160
Summary: See PHI1707, which has a Jupyter notebook which fails to diff nicely when modified. The root cause seems to be that the document does not end in a newline.
Test Plan: Applied patch, diffed the file, got a Jupyter diff out of it.
Differential Revision: https://secure.phabricator.com/D21159
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary: Ref T13516. Mark low-importance changes (generated code, deleted files) and owned-with-authority changes in the filetree.
Test Plan: {F7375327}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21157
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary: Ref T13516. Apply basic UI styling to the new UI and make some more interaction work.
Test Plan: {F7374096}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21153
Summary: Ref T13516. Generate a tree structure based on the page changesets. Still missing styles and a whole lot of behavior.
Test Plan: {F7373967}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21152
Summary: Ref T13516. This glues "FormationView" to "ChangesetList". The actual tree is not functional in any meaningful way yet.
Test Plan: {F7373838}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21151
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary: Ref T13515. External editor URIs currently depend on repositories having callsigns, but callsigns are no longer required. Add some variables to support configuring this feature for repositories that do not have callsigns.
Test Plan: Changed settings to use new variables, saw links generate appropriately.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21147
Summary:
Ref T13515.
- Previously valid editor URIs may become invalid without being changed (if an administrator removes a protocol from the list, for example), but this isn't explained very well. Show an error on the settings page if the current value isn't usable.
- Generate a list of functions from an authority in the parser.
- Generate a list of protocols from configuration.
Test Plan: {F7370872}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21146
Summary:
Ref T13515. Settings currently has some highly specialized code for rendering "Changes saved." messages. The "saved" state is communicated across a redirect-after-POST by adding `/saved/` to the end of the URI.
This isn't great. It needs a lot of moving pieces, including special accommodations in routing rules. It's user-visible. It has the wrong behavior if you reload the page or navigate directly to the "saved" URI.
Try this scheme, which is also pretty sketchy but seems like an upgrade on the balance:
- Set a cookie on the redirect which identifies the form we just saved.
- On page startup: if this cookie exists, save the value and clear it.
- If the current page started with a cookie identifying the form on the page, treat the page as a "saved" page.
This supports passing a small amount of state across the redirect-after-POST flow, and when you reload the page it doesn't keep the message around. Applications don't need to coordinate it, either. Seems somewhat cleaner?
Test Plan: In Firefox, Safari, and Chrome: saved settings, saw a "Saved changes" banner without any URI junk. Reloaded page, saw banner vanish properly.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21144
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary: Ref T13515. No callsites actually use this, most editors don't support it, it doesn't seem terribly useful for the ones that do, it makes template-based APIs for line-number substitution complicated, and we can probably just loop on `window.open()` anyway.
Test Plan: Grepped for affected symbols, found no more references. Loaded settings page, saw no more setting.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21142
Summary:
Ref T13515. Adding "\" ("Open in External Editor") made this slighlty worse, but it was already pretty bad.
Long ago the keys had a special style on them, but this got changed and dropped somewhere around D16568 -- although at the time, I think they still had a grey background (see T11654).
Some later change removed this background.
Put the background back and separate the keystrokes into groups.
Test Plan: {F7370615}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21141
Summary:
Ref T13515. It's not intuitive that these settings are "Display Preferences", even thought they're intenrally related to some of the other display preferences.
Give them a separate group.
Test Plan: {F7370500}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21140
Summary:
Ref T13455. Update the other "view state" properties to work like "highlight" now works.
Some complexity here arises from these concerns:
- In "View Standalone", we render the changeset inline. This is useful for debugging/development, and desirable to retain.
- In all other cases, we render the changeset with AJAX.
So the client needs to be able to learn about the "state" properties of the changeset on two different flows. Prior to this change, each pathway had a fair amount of unique code.
Then, some bookkeeping issues:
- At inital rendering time, we may not know which renderer will be selected: it may be based on the client viewport dimensions.
- Prior to this change, the client didn't separate "value of the property for the changeset as rendered" and "desired value of the property".
Test Plan:
- Viewed changes in Differential, Diffusion, and in standalone mode.
- Toggled renderer, character sets, and document engine (this one isn't terribly useful). Reloaded, saw them stick.
- Started typing a comment, cancelled it, hit the undo UI.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21138
Summary:
Ref T13455. Add container-level storage for persistent view state, and persist "Highlight As..." inside it.
The storage generates a "PhabricatorChangesetViewState" configuration object as an output.
When preferences are expressed on a diff and that diff is later attached to a revision, we attempt to copy the preferences.
The internal storage tracks per-changeset settings, but currently always uses "last update wins" to apply the settings in the UI.
Test Plan:
- Viewed revisions, changed highlighting, reloaded. Saw highlighting stick in revision view and standalone view.
- Viewed commits, changed highlighting, reloaded. Saw highlighting stick.
- Created a diff, changed highlighting, turned it into a revision, saw highlighting persist.
Subscribers: jmeador, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21137
Summary:
Ref T13515. We "shield" some changesets, including generated code and intradiffs with no intermediate changes.
These files don't get shielded if they have inline comments.
But, if the viewer has collapsed all the comments, we can shield the file again.
Test Plan:
- Created a change affecting files A and B, with three diffs:
- Touch A and B.
- Touch B only.
- Touch nothing.
- Added an inline to A and collapsed it.
- Viewed Diff 1 vs Diff 2:
- Saw A collapse with a note about inlines.
- Saw B changes, normally.
- Viewed Diff 2 vs Diff 3:
- Saw A collapse with a note about inlines.
- Saw B collapse normally.
- Uncollapsed the inline, viewed 1v2 and 2v3, saw A expand in both cases.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21136
Summary: Ref T13515. See PHI1661. If a file is selected, add a keystroke to click the "Open in External Editor" link.
Test Plan: In Safari, Chrome, and Firefox: used "J" to select a file, then "\" to open it in an external editor. (In Safari and Chrome, this prompts.)
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21135
Summary: Fixes T13512. Archived packages in Owners are missing hinting, but should have it.
Test Plan:
Before:
{F7369122}
After:
{F7369128}
Maniphest Tasks: T13512
Differential Revision: https://secure.phabricator.com/D21134
Summary:
Ref PHI1292. Enable fulltext searchs in paste. Maybe this should only index a snippet instead of the entire content?
Also updates table names in `PhabricatorPasteQuery`.
Test Plan: Created some pastes, indexed them, searched for them.
Reviewers: amckinley
Subscribers: codeblock, Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20650
Summary: Ref T13511. Currently, Ferret fulltext field functions (like "title:") are hard-coded. Modularize them so extensions may define new ones.
Test Plan: Added a new custom field which emits data for the indexer, searched for "animal-noises:moo", "animal-noises:-", etc., in global search and application search.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21131
Summary:
Ref T13511. Ferret functions currently define "aliases", and some applications override the default aliases.
This probably isn't really the right model, since it means the available function aliases in global search depend on the types of documents you're searching for. This isn't fundamentally unworkable but is kind of weird.
Regardless, these don't actually work. Searching for "description:x" is a syntax error.
Since they don't work, it's a good bet no one is relying on them. Just get rid of them until there's a clearer argument for the feature.
Test Plan: Grepped for "getFunctionMap", got no other hits. Ran some queries with the alias functions, got syntax errors.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21130
Summary:
Ref T13501. Depends on D21127. With the "prefix" behavior removed in D21127, we now have two virtually identical copies of the same code.
The newer one in Ferret is better: it slices utf8 correctly and is slightly more efficient on large inputs. Pull it out and make all callers call into it.
Test Plan:
- Grepped for all affected symbols.
- Ran `bin/search index --force ...` to reindex various objects (tasks, files).
- Searched for things in the UI.
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21128
Summary:
Ref T13501. The older ngram code has some "prefix" behavior that tries to handle cases where a user issues a very short (one or two character) query.
This code doesn't work, presumably never worked, and can not be made to work (or, at least, I don't see a way, and am fairly sure one does not exist).
If the user searches for "xy", we can find trigrams in the form "xy*" using the index, but not in the form "*xy". The code makes a misguided effort to look for " xy", but this will only find "xy" in words that begin with "xy", like "xylophone".
For example, searching Files for "om" does not currently find "random.txt".
Remove this behavior. Without engaging the trigram index, these queries fall back to an unidexed "LIKE" table scan, but that's about the best we can do.
Test Plan: Searched for "om", hit "random.txt".
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21127
Summary: Ref T13511. This function does nothing interesting and has no callers.
Test Plan: Grepped for callers.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21126
Summary:
Ref T13507. We currently compress normal responses, but do not compress file data responses because most files we serve are images and already compressed.
However, there are some cases where large files may be highly compressible (e.g., huge XML files stored in LFS) and we can benefit from compressing responses.
Make a reasonable guess about whether compression is beneficial and enable compression if we guess it is.
Test Plan:
- Used `curl ...` to download an image with `Accept-Encoding: gzip`. Got raw image data in the response (as expected, because we don't expect images to be worthwhile to recompress).
- Used `curl ...` to download a text file with `Accept-Encoding: gzip`. Got a compressed response. Decompressed the response into the original file.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21125
Summary:
See <https://hackerone.com/reports/850114>.
An attacker with administrator privileges can configure "notification.servers" to connect to internal services, either directly or with chosen parameters by selecting an attacker-controlled service and having it issue a "Location" redirect.
Generally, we allow this attack to occur. The same administrator can use an authentication provider or a VCS repository to perform the same attack, and we can't reasonably harden these workflows without breaking things that users expect to be able to do.
There's no reason this particular variation of the attack needs to be allowable, though, and the current behavior isn't consistent with how other similar things work.
- Hide the "notification.servers" configuration, which also locks it. This is similar to other modern service/server configuration.
- Don't follow redirects on these requests. Aphlict should never issue a "Location" header, so if we encounter one something is misconfigured. Declining to follow this header likely makes the issue easier to debug.
Test Plan:
- Viewed configuration in web UI.
- Configured a server that "Location: ..." redirects, got a followed redirect before and a failure afterward.
{F7365973}
Differential Revision: https://secure.phabricator.com/D21123
Summary:
Ref T13507. Now that we handle processing of "Content-Encoding: gzip" headers by default, this setup check can get a decompressed body back. Since it specifically wants a raw body back, disable this behavior.
Also, "@" a couple things which can get in the way if they fail now that error handling is more aggressive about throwing on warnings.
Test Plan: Ran setup check after other changes in T13507, got clean result.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21122
Summary: Ref T13507. If we believe the server can accept "Content-Encoding: gzip" requests, make the claim in an "X-Conduit-Capabilities" header in responses. Clients can use request compression on subsequent requests.
Test Plan: See D21119 for the client piece.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21120
Summary: Ref T13507. See that task for discussion.
Test Plan: Faked different response behaviors and hit both variations of this error.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21116
Summary:
See PHI1692. Currently, the Aphlict log is ridiculously verbose. As an initial pass at improving this:
- When starting in "debug" mode, pass "--debug=1" to Node.
- In Node, separate logging into "log" (lower-volume, more-important messages) and "trace" (higher-volume, less-important messages).
- Only print "trace" messages in "debug" mode.
Test Plan: Ran Aphlict in debug and non-debug modes. Behavior unchanged in debug mode, but log has more sensible verbosity in non-debug mode.
Differential Revision: https://secure.phabricator.com/D21115
