Summary:
Fixes T10264. I'm reasonably confident that this is the chain of events here:
First, prior to 8269fd6e, we would ignore "Content-Encoding" when reading inbound bodies. So if a request was gzipped, we would read a gzipped body, then give `git-http-backend` a gzipped body with "Content-Encoding: gzip". Everything matched normally, so that was fine, except in the cluster.
In the cluster, we'd accept "gzip + compressed body" and proxy it, but not tell cURL that it was already compressed. cURL would think it was raw data, so it would arrive on the repository host with a compressed body but no "Content-Encoding: gzip". Then we'd hand it to git in the same form. This caused the issue in 8269fd6e: handing it compressed data, but no "this is compressed" header.
To fix this, I made us decompress the encoding when we read the body, so the cluster now proxies raw data instead of proxying gzipped data. This fixed the issue in the cluster, but created a new issue on non-cluster hosts. The new issue is that we accept "gzip + compressed body" and decompress the body, but then pass the //original// header to `git-http-backend`. So now we have the opposite problem from what we originally had: a "gzip" header, but a raw body.
To fix //this//, we could do two things:
- Revert 8269fd6e, then change the proxy request to preserve "Content-Encoding" instead.
- Stop telling `git-http-backend` that we're handing it compressed data when we're handing it raw data.
I did the latter here because it's an easier change to make and test, we'll need to interact with the raw data later anyway, to implement repository virtualization in connection with T8238.
Test Plan: See T10264 for users confirming this fix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10264
Differential Revision: https://secure.phabricator.com/D15258
Summary:
This commit adds the `transactionID` field to manphest.gettransactions, to
satisfy the request in T10327
Test Plan: Call the `maniphest.gettransactions` endpoint, verify `transactionID` is present
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Differential Revision: https://secure.phabricator.com/D15250
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Fixes T10343. All solutions here seem basically fine. I think adding this small bit of complexity is OK, and sorrrrt of like this behavior sometimes.
- Allow disabling this behavior per-status.
- Disable it by default for "Invalid" and "Duplicate" (I left "wontfix", since that's a resolution?).
Beyond being more flexible, I think this is slightly better?
Test Plan:
- Closed a task as invalid: no claim.
- Closed a task as resolved: claim.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10343
Differential Revision: https://secure.phabricator.com/D15257
Summary: Ref T4427. Seems fine / not egregiously broken.
Test Plan: Edited points configuration. Tried to set a bad value. Set a good value. Persued examples and help text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15256
Summary: minor spacing updates, but i need to likely take a more details pass, specifically points look janky with project tags since they are not in the same `li`.
Test Plan: Zoom into tags, see they all are same height and align.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15255
Summary: Mimics the Project Hovercards, more custom UI.
Test Plan: Hover over person with and without badges, hover over project.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15253
Summary:
Fixes T10330.
- Anywhere we support "matches regexp", also allow "does not match regexp". Although you can sometimes write a clever negative regexp, these rules are better expressed with "does not match <simple regexp>" anyway, and sometimes no regexp will work.
- Always allow "does not contain" when we support "contains".
- Fix some JS issues with certain rules affecting custom fields.
Test Plan:
- Wrote an "Affected files do not match regexp" rule that required every diff to touch "MANUALCHANGELOG.md".
- Tried to diff without the file; rejected.
- Tried to diff with the file; accepted.
- Wrote a bunch of "contains" and "does not contain" rules against text fields and custom fields, then edited tasks to trigger/observe them.
- Swapped the editor into custom text, user, remarkup, etc fields, no more JS errors.
{F1105172}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10330
Differential Revision: https://secure.phabricator.com/D15254
Summary: One missing word, one `0` that should be a `)`, simplify a couple of mega-clauses to improve readability?
Test Plan: ((O)) . ((O))
Reviewers: michaeljs1990, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15252
Summary: We will sell you as many new databases as you want, cheap! Just $1 per database!
Test Plan: (O).(O)
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15249
Summary: Restricts the dropshadow to just the js dialog.
Test Plan: Test login page, logout dialog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15248
Summary: Also adds the commit to the header underneath the title. Ref T7628
Test Plan: Review a few Diffusion pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15246
Summary: These are not needed I think? and handy for cut and paste. Fixes T7628
Test Plan: cut and paste easier from commit hash.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15245
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: I missed this during cleanup.
Test Plan: Go to a project, then: Subprojects, Create Milestone, Cancel. No longer 404/fatals.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15241
Summary:
Fixes T8197. Currently, if you priority-sort a workboard and drag a card to the top or bottom, we change the priority even if we do not need to.
For example, if the lowest priority in a column is "Low", and you drag a "Wishlist" task underneath it, we incorrectly increase the priority of the task to "Low", when we do not actually need to touch it. This is bad/confusing.
A similar thing happens when dragging a "High" priority task to the top of a column where the highest priority is currently "Normal".
Test Plan:
- Create a column with a "Normal" task.
- Sort workboard by Priority.
- Drag a "High" task above it. After patch: task still "High".
- Drag a "Wishlist" task below it. After patch: task still "Wishlist".
Also dragged a ton of tasks into the middle of other tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8197
Differential Revision: https://secure.phabricator.com/D15240
Summary:
Fixes T6580. Now:
- Empty field means "unlimited".
- Zero means 0.
- Nonzero means that number.
(Although you can now have fractional points, I didn't change columns to allow fractional limits, because too bad.)
Test Plan: {F1103688}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6580
Differential Revision: https://secure.phabricator.com/D15239
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. The root problem is that dragging stuff near the bottom of the board can cause jittery, jumpy behaviors.
Internal scrolling has changed the nature of this problem. Previously, the height of the board itself would jump around, but it's now fixed so the height of columns jumps around instead.
We could take the same approach and add a chunk to the bottom of each column when a drag starts, but this is really distracting visually since it's obvious to the user.
Instead, treat columns as infinitely tall (so dragging beneath them still counts as dragging to the bottom position).
Test Plan:
- View a board with a column taller than the screen (has a scrollbar).
- Drag a card to near the bottom position.
- Move the mouse down a little bit at a time, continuing toward the bottom of the page.
- Before patch: at some point, UI flips out and starts rapidly adding, scrolling, and removing the ghost.
- After patch: sensible behavior, ghost is in bottom position for all cursor locations.
Also works for dragging to the top.
(This leaves us with a little less dead space for cancelling drags, but you've still got the left menu, anything offscreen, and the escape key, which seems fine.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15227
Summary:
Ref T4900. This gets moves on the new stuff and cleans them up a little.
Two behaviors haven't been ported yet: height adjustment during drags (which is broken anyway with inner scroll) and updating point counts (coming soon).
Test Plan: Dragged cards around on a board, including top/bottom positions and normal/priority sort.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15226
Summary: Ref T4900. Continuing to move this over into a more structured approach.
Test Plan: Panned a workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15225
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary: Fixes T10317. If we failed to load `$device`, it will be null, so we won't be able to call `getName()` on it.
Test Plan: `SSH_CLIENT='127.0.0.1' ./bin/ssh-exec --phabricator-ssh-device xyz` no longer fatals
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10317
Differential Revision: https://secure.phabricator.com/D15235
Summary: Fixes T10316. Fixes T10311.
Test Plan:
- Create a project, create a milestone, go back to the parent, go to the workboard. Previously, fatal. Now, prompts you to create workboard.
- Create a project, create a milestone, create the parent workboard, put a task in the milestone's column, go to the milestone workboard. Previously, fatal. Now, prompts you to create workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10311, T10316
Differential Revision: https://secure.phabricator.com/D15232
Summary:
Ref T4427.
- When points are configured, show them on the task detail page (just a simple property, at least for now).
- Typecast points better to avoid "joe changed points from 12 to 12." beacuse we compare the stored value (as a string) to the new value (as a double).
Test Plan:
- Saw points on detail view.
- Created task with points, then edited it without touching points. No more spurious "changed from 12 to 12" transaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15223
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary:
Ref T10288.
I couldn't figure out how to reasonably get the interior right borders to round like the mock, but I think this is otherwise mostly faithful. Feel free to fix stuff.
Test Plan: {F1100415}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10288
Differential Revision: https://secure.phabricator.com/D15219
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
Fixes T7410.
- Adds a "Disable Workboard" action to the "Manage Backlog" menu.
- We'll probably move this somewhere else if/when that column gets too messy.
- Disabling a board hides it, prevents it from being recreated by non-editors, and hides the "Project (Backlog)" annotations.
- Resotring a board puts it back in pristine condition.
Test Plan:
- Disabled a board.
- Verified "(Backlog)" annotations vanished.
- Enabled a board.
Reviewers: chad
Reviewed By: chad
Subscribers: mbishopim3
Maniphest Tasks: T7410
Differential Revision: https://secure.phabricator.com/D15215
Summary:
- Custom scrollbars, colors
- New div with some better padding (floor for the column)
- More consistent spacing around the board itself.
- Slightly darker columns
- Smaller horizonal scrollbar
Test Plan:
Chrome Mac / Desktop.
{F1100342}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15217
Summary: Fixes T10299.
Test Plan:
- Visited `/maniphest/?projects=x` locally, where `x` is some valid project slug.
- Before patch: Fatal on `requireViewer()` call.
- After patch: Works correctly, filling the correct project into parameters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10299
Differential Revision: https://secure.phabricator.com/D15214
Summary: This scroll lock thing prevented both X and Y scrolling, but should only prevent Y scrolling. Dragging a card to the edge to scroll left/right is fine.
Test Plan: Scrolled a workboard left/right by dragging a card to the edge.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15213
Summary:
Ref T5240. For boards with a lot of columns and users without "shift + mousewheel" or a touchpad, allow click-drag on the board background to pan the board horizontally.
The `ew-resize` cursor cue might be a little too intense. If it's annoying, we could drop it and just leave this as a secret feature to discover.
Test Plan: Panned the board horizontally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15211
Summary:
Ref T5240.
- Columns are fixed height.
- Columns scroll internally.
- Drag behaviors generally align with these column behaviors.
Test Plan: {F1099061}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15209
Summary:
Currently, in Safari, if you drag an image onto a board to make it a cover file and then wave it around wildly a lot over differnent cards, it sometimes glitches out a bit and won't drop on them properly.
This appears to be because sequencing and delivery of dragenter/dragleave events isn't always totally ideal.
Instead, just cancel any existing drag when we get a new drag that targets a new drop target.
Test Plan:
- Opened a board with a bunch of cards.
- Dragged a file from my desktop onto the board.
- Waved it around wildly, hovering over many different cards.
- Before patch: sometimes cards under the cursor stopped highlighting properly.
- After patch: behavior seems correct and consistent.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15208
Summary: Fix typo. That said, I love the example.
Test Plan: no
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15210
Summary:
Ref T10295
* Viewing Upcoming Events in the calendar would display 'Attending: ' even if there were not attendees. This caused confusion, such as 'Is it telling me I am "Attending?"'
* When a calendar event has no attendees, simply do not display the 'Attending: ' label
Test Plan:
* Add a new event with no one attending.
* Add a new event with one or more attendees.
* View the Upcoming Events query of the Calendar app.
* Notice how the one with no attendees does not show 'Attending: ' while the other with attendees will show the already existing 'Attending: jdoe, ssmith' label.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10295
Differential Revision: https://secure.phabricator.com/D15207
Summary:
Ref T10010.
- Viewing an empty board with milestone columns did a meaningless edge query. Don't do that.
- When creating the first milestone of a parent, force the indexing engine to rematerialize it inline. This sets `hasMilestones` properly. Otherwise, the daemons may take some time to fix this in the indexer.
Test Plan:
- Viewed an empty board of a project with a milestone.
- Viewed a normal board.
- Created the first milestone of a project with a big queue of daemons, saw project state immediately fully reflect the project having milestones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15206
Summary:
Fixes T7844. This isn't going to win any awards, but it has all the information.
Mostly, we don't (or shouldn't, at least?) need the global `static` stuff anymore because we dropped the top-level custom scrollbar.
Test Plan: Printed a PDF of a workboard, got all the cards in the output.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7844
Differential Revision: https://secure.phabricator.com/D15205
