Summary:
Ref T12733. Currently, we detect the changeset which is in the middle of the screen as the current changeset.
This doesn't always get us the most intuitive changeset, particularly after a navigation from the scroll objective list: when you jump to changeset "X", you'd tend to expect "X" to be shown in the header, but the //next// changeset may be shown if "X" is too short.
Instead, select the changeset near the top of the screen (spanning an invisible line slightly below the banner).
Test Plan: Scrolled and jumped through a document with long and short changesets, saw a more intuitive changeset selected by the banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17976
Summary: Fixes T12735. Adds a sound if the user is logged out, skips checking a setting.
Test Plan: set participants to null and verify sound plays, no exceptions1111
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12735
Differential Revision: https://secure.phabricator.com/D17973
Summary:
Ref T7664. The current algorithm for moving task subpriorities can end up stuck in a real sticky swamp in some unusual situations.
Instead, use an algorithm which works like this:
- When we notice two tasks are too close together, look at the area around those tasks (just a few paces).
- If things look pretty empty, we can just spread the tasks out a little bit.
- But, if things are still real crowded, take another look further.
- Keep doing that until we're looking at a real nice big spot which doesn't have too many tasks in it in total, even if they're all in one place right now.
- Then, move 'em out!
Also:
- Just swallow our pride and do the gross `INSERT INTO ... "", "", "", "", "", "", ... ON DUPLICATE KEY UPDATE` to bulk update.
- Fix an issue where a single move could cause two different subpriority recalculations.
Test Plan:
- Changed `ManiphesTaskTestCase->testTaskAdjacentBlocks()` to insert 1,000 tasks with identical subpriorities, saw them spread out in 11 queries instead of >1,000.
- Dragged tons of tasks around on workboards.
- Ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D17959
Summary: Ref T12732. This is pre-existing but fix it since I caught it while banging around.
Test Plan: {F4967442}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17970
Summary:
Ref T12732. Currently, different ways of setting a profile image can leave you in different places.
Instead, always send the user back to the "Manage" page.
Test Plan: Used "Current Picture", "use picture", "Build picture" and "upload picture", always ended up in the same spot.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17967
Summary: Ref T12732. Use `renderValue()` to build `renderValueList()` so we get nice fancy text for these.
Test Plan: {F4967410}
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17966
Summary: Ref T12732. See D17918. With modular transactions, `getCustomTransactionNewValue()` isn't actually called.
Test Plan: Moved document `/x/` to `/y/`, saw document gone at `/x/` instead of copied.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17963
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary: I deleted too many lines of code here and TYPE_MOVE was always being applied when CONTENT was set. This should fix on next document save, but should I write some migration tool anyways?
Test Plan: Create a new document, see document with correct status.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17960
Summary: Brings more UI tweaks to disabled objects, like projects/people. Also fixes a missing icon in projects.
Test Plan: Application search with people and projects that have disabled results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17962
Summary: I'm not sure you can actually remove a project's image (maybe via the API?), but I kept the code for rendering the relevant title/feed anyway.
Test Plan: Unit tests + adding/changing project pictures.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17954
Test Plan: Unit tests all pass. Added/removed/altered some project hashtags and observed expected transactions in timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17952
Summary: This allows adding of pinboard items to a timeline. I'm hoping we can get this in for Maniphest (Pholio, Cover Image) and Macro (because, Macro), but unsure how to scalably do this. Anyways, here's the front end.
Test Plan:
Make some fake timeline items in UIExamples, test mobile, tablet, and desktop breakpoints.
{F4965798}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17950
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary: Also changes access modifiers on `PhabricatorProjectTransactionEditor` and sets up `storage` for `applyExternalEffects`.
Test Plan: Created new projects, attempted to create without name, with too long of a name, and with a name that conflicts with other projects and observed expected errors.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T12673
Differential Revision: https://secure.phabricator.com/D17947
Summary: Used by `PholioImageFileTransaction::mergeTransactions()`. I forgot to test adding multiple images to a Mock at the same time after migrating `mergeTransactions` over to the modular framework.
Test Plan: Added multiple images in a single transaction and didn't get an exception about accessing a protected function.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17946
Summary: This says "Edit Subscription" but the page only lets you update the payment method for autopay. I think this is confusing users. I tried to find the best language here, but suggest something else if you prefer.
Test Plan: Review language on sample subscription page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17944
Summary:
Fixes T10563. If you have a thread like this:
```
> A
> B
> C
```
...and you reply to "B", we should put the new inline below "B".
We currently do when you reload the page, but the initial edit goes at the bottom always (below "C").
Test Plan: {F4963015}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D17938
Summary:
Ref T12616. When you "Delete" a comment from the preview, we try to delete the comment on screen too.
It may or may not be present on screen: if you just added it it's usually visible. However, you might also have hidden the file it contains or it could be on an older diff in a file which is no longer present in the current diff.
After updates in T12616, we could only find the comment if you'd previously interacted with it for some reason. Update this code to be able to find all inlines present in the document.
Test Plan:
- Write a draft comment.
- Reload the page.
- DO NOT INTERACT WITH THE COMMENT!
- Delete it from the preview.
- After patch: Comment is deleted from the document, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17937
Summary: Skips rendering of partial elements if no actions are present.
Test Plan: Tested on profile menu item page, maniphest curtain, phriction dropdown, and instance backups page (no actions at all).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17931
Summary:
Fixes T11662. In the very obscure situation described in that task, quiet a JS console warning.
The actual edit operation appears to work correctly after changes elsewhere.
There aren't really any legitimate lines for us to highlight in this case so I'm just giving up rather than trying to do something approximate.
Test Plan:
- Wrote `long.txt`.
- Created revision.
- Added an inline near the bottom.
- Removed most of `long.txt`.
- Updated revsion.
- Replied to the ghost inline.
- Edited the reply to the ghost inline, worked.
- Hovered the reply to the ghost inline: no line highlight, but no errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11662
Differential Revision: https://secure.phabricator.com/D17930
Summary:
Fixes T8323. See that task for a description.
We were using `nonempty()`, but that rule doesn't cover synthetic deletions (file present in an earlier diff, but no longer present in the later diff).
Test Plan: Followed the steps in T8323, got a clean comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8323
Differential Revision: https://secure.phabricator.com/D17929
Summary: Fixes T1026. Ref T12616. Allows drag-to-select on devices to add inlines on a range of lines, using dark magic that I copy/pasted from StackOverflow.
Test Plan: Left a comment on a range of lines on iPhone simulator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T1026
Differential Revision: https://secure.phabricator.com/D17928
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary: We currently override button color for headers, since the default is blue, but if a developer sets a specific color, we should respect that.
Test Plan: Set a button in the header to green and see green. See grey everywhere else.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17922
Summary:
Fixes T7682. The left-hand-side "<th />" row did not generate with the correct ID.
(I couldn't reproduce the exact issue described in T7682, but hovering comments on either side now works properly for me.)
Test Plan: {F4962479}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7682
Differential Revision: https://secure.phabricator.com/D17926
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
Summary:
Fixes T8047. Ref T12616. Fixes T9270. This moves the "hover" part of the hover/drag behavior to the new code, leaving the "drag" part for a followup change.
The new hover UI behaves properly with Quicksand (T8047) and the filetree (T9270).
Test Plan: Hovered over inlines, saw lines select properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T9270, T8047
Differential Revision: https://secure.phabricator.com/D17919
Summary: Moves this transaction over to modular transactions.
Test Plan: Move a document, re-title a document, try to move over an existing document.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17918
Summary: Our `local.json` configuration file contains various secrets, including database usernames and passwords. As such, we recently changed the permissions on this file from `0644` to `0640`. After doing so, however, I constantly forget to run commands with `sudo`. This is made worse by the fact that `PhabricatorConfigLocalSource` seems to simply ignore `local.json` is it isn't readable, whereas throwing an `Exception` would have saved me a lot of debugging.
Test Plan:
```name=Before
> /usr/local/src/phabricator/bin/config get mysql.pass
{
"config": [
{
"key": "mysql.pass",
"source": "local",
"value": null,
"status": "unset",
"errorInfo": null
},
{
"key": "mysql.pass",
"source": "database",
"value": null,
"status": "error",
"errorInfo": "Database source is not configured properly"
}
]
}
```
```name=After
> /usr/local/src/phabricator/bin/config get mysql.pass
[2017-05-16 21:49:26] EXCEPTION: (FilesystemException) Path '/usr/local/src/phabricator/conf/local/local.json' is not readable. at [<phutil>/src/filesystem/Filesystem.php:1124]
arcanist(head=stable, ref.master=3c4735795a29, ref.stable=20ad47f27331), phabricator(head=stable, ref.master=3dae9701298f, ref.stable=fcebaa5097f3), phutil(head=stable, ref.master=a900d7b63e95, ref.stable=d02cc05931b0)
#0 Filesystem::assertReadable(string) called at [<phutil>/src/filesystem/Filesystem.php:39]
#1 Filesystem::readFile(string) called at [<phabricator>/src/infrastructure/env/PhabricatorConfigLocalSource.php:25]
#2 PhabricatorConfigLocalSource::loadConfig() called at [<phabricator>/src/infrastructure/env/PhabricatorConfigLocalSource.php:6]
#3 PhabricatorConfigLocalSource::__construct() called at [<phabricator>/src/infrastructure/env/PhabricatorEnv.php:195]
#4 PhabricatorEnv::buildConfigurationSourceStack(boolean) called at [<phabricator>/src/infrastructure/env/PhabricatorEnv.php:95]
#5 PhabricatorEnv::initializeCommonEnvironment(boolean) called at [<phabricator>/src/infrastructure/env/PhabricatorEnv.php:75]
#6 PhabricatorEnv::initializeScriptEnvironment(boolean) called at [<phabricator>/scripts/init/lib.php:22]
#7 init_phabricator_script(array) called at [<phabricator>/scripts/init/init-setup.php:11]
#8 require_once(string) called at [<phabricator>/scripts/setup/manage_config.php:5]
```
Reviewers: #blessed_reviewers, joshuaspence
Reviewed By: joshuaspence
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17917
Summary: Ref T12616. The ability to do {nav Edit > Cancel > Undo} to get your text back on inlines got dropped during the conversion. Restore it.
Test Plan:
Created, replied, and edited inlines, typed text, then cancelled. Was able to undo.
Also undid normal deletion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17916
Summary: It's an icon. For story points.
Test Plan: Set some points, see icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17915
Summary:
Ref T12616. Fixes T11648. Currently, we snug up replies with a negative margin (from T10563) but this throws off the anchor highlighting.
Instead:
- Remove padding from these dolumns.
- Use margins on the stuff inside them instead.
- Less margins for replies.
- Less margins for collapsed comments.
- Show some text for collapsed comments.
Test Plan:
{F4960890}
{F4960891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11648
Differential Revision: https://secure.phabricator.com/D17913
Summary:
Fixes T11784. A lot of things are interacting here, but this probably gets slightly better results slightly more often?
Basically:
- When we load content, we try to keep the viewport "stable" on the page, so the page doesn't jump around like crazy.
- If you're near the top or bottom of the page, we try to stick to the top (e.g., reading the summary) or bottom (e.g., writing a comment).
- But, if you followed an anchor to a comment that's close to the bottom of the page, we might stick to the bottom intead of staying with the anchor.
Kind of do a better job by not sticking to the bottom if you have an anchor. This will get things wrong if you follow an anchor, scroll down, start writing a comment, etc. But this whole thing is a pile of guesses anyway.
Test Plan:
- Followed an anchor, saw non-sticky stabilization.
- Loaded the page normally, scrolled to the bottom real fast, saw sticky stabilization.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11784
Differential Revision: https://secure.phabricator.com/D17911
Summary:
Fixes T8420. Now that hidden inlines no longer fold into a big clump, anchors can just jump to them in a normal way.
Move the anchors up a smidge so thing work.
Test Plan: Clicked an anchor pointed at a hidden inline, ended up in the right place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8420
Differential Revision: https://secure.phabricator.com/D17910
Summary: Run through all the pages in projects and make sure they all feel similar. Adds back curtain on board manage page, even though it is sad for only having a single action.
Test Plan: Test all pages on a project for consistency in UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17909
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary: Cleans up the UI, moves details over to curtain, adds some fallback no data strings.
Test Plan: Review with and without subprojects, milestones.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17907
Summary: We seem to already support this, just takes it fully there. We don't need to see things like "Flag", etc, on certain subpages of projects/people/etc.
Test Plan: Review Members, Subproject pages, no longer see "Flag for Later" which only is for the Project itself. Check manage, still there.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17897
