Summary: @edward, you would need to delete these options from FB config to avoid setup warning.
Test Plan: /T1
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5620
Test Plan: Searched for `IDS_PHID` and loaded homepage.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5619
Summary: Creates CSS Gradients for buttons. Also tweaked hover and active styles. "Fixed" disabled state (this may require follow up diffs to correct around site)
Test Plan: Tested Maniphest and UI Examples in Chrome and IE10/9/8
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5624
Summary: See some discussion in D5622. Javelin explicitly prevents you from putting `<script>` tags into `JX.$H()`, which is probably a good idea, so just let this behavior fail less abruptly instead. We currently have no cases where we load something into a cache and then make a decision about whether to put it into the document or not later on; this should hold us over until we do. If and when we do, we can let those endpoints capture behaviors and replay them later or something.
Test Plan: Verified tokenizers still work correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5623
Summary:
the JS is fragile with respect to the tokenizer coming in from the people widget. make sure to always try to load this up. Note this generally needs to get cleaned up where the server should only send down the *exact* bits the client needs. This is all TODO as part of getting this on mobile perfectly. Also note this fragility exists still in that you can break conpherence by clicking quickly before the initial tokenizer load loads.
For old bad data, at some point we weren't updating participation as well as we do today in the editor class. the result is with the migration and code change some conversation participants have bad "last seen message" counts. the simplest case is the test user talking to themselves -- threads before the editor code fixes / changes will have the entire thread as unread for these folks. The other buggy case I saw was where the "last reply" to a thread wasn't being count. These issues showed up for threads February and older which is old.
Test Plan: edited conpherence meta data and no JS bugs. pontificated and no JS bugs. added a person and no JS bugs.
Reviewers: chad, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5622
Summary:
Fixes T2900 - Display link to document version and diff for edited Phriction Documents.
Also display the target document for moved pages.
Test Plan: Edited/Moved some pages, verified that the links are linking to the correct versions.
Reviewers: epriestley
Reviewed By: epriestley
CC: adityar7, aran, Korvin
Maniphest Tasks: T2900
Differential Revision: https://secure.phabricator.com/D5615
Summary: also re-enables the updating of the widgets and "cleans up" the javascript a tad. Ref T2867
Test Plan: all sorts of conpherence fun like adding people to threads, adding files, pontificating, etc
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2867
Differential Revision: https://secure.phabricator.com/D5595
Summary:
Refs T1048; Fixes T2902 - (Probably) fixes @vrana's issue. I managed
to repro it on Ubuntu FF (though on Windows with 1.0GHz/512MB it's
really worse...).
This revises the approach to the graceful degradation for
`too-far-to-the-screen-edge-edge-case`.
I noticed that `x` could become very negative, up to about ~`-170px`.
This is due to the //"already-on-the-left-side"// nature of object tags.
`50 - 200 - 20` = `negative`. Adding `100px` (node.dimension.x / 4) to
that won't really help, as the hovercard would still be offscreen.
Instead, display them left-aligned with the object tags on the left edge
per default, and offer centerization in center cases. This is also better
for Pholio, Phriction, which have a way lower min-x than Maniphest,
Differential.
I also disabled placing the hovercard below the tag in case there's not
enough space on the north side. The hovercard would not display 99.99% of
the times after being hidden (and it retains the flickering behaviour).
Another reason is also our current hide-behaviour, which only assumes
north-side alignment. Adding south-side didn't really work (I'm bad with
JS), so I didn't bother with it. Disabling this is //acceptable//, since
it only really affects Pholio, Phriction. And nobody places object tags
in the first line, anyway. Except for my test pages, of course :/
Btw, this also removes the weird jaggy horizontal shifts for object of
various lengths (e.g. `{D4356}`, `{rP32ofhw0842obw}` etc.). I think
that's only good.
Test Plan:
Hovered in Pholio, Phriction in Chrome, FF. Did not touch
left screen border.
Hovered in Maniphest, Differential. Tags farther to the left were
aligned left, tags more in the center were pretty centered.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048, T2902
Differential Revision: https://secure.phabricator.com/D5612
Summary: Simple alternative to D5448. Adds a "header" type which renders a visual separator.
Test Plan:
{F39507}
{F39508}
Reviewers: jamesr, btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5616
Summary:
See discussion in T2832. In particular, this is pretty confusing:
{F38674}
The confusion created in situations like this is much worse than the tiny benefit in parseability the UI rule provides. We'll probably rewrite this table in terms of ObjectListView anyway.
Fixes T2832.
Test Plan: Looked at Audit list.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2832
Differential Revision: https://secure.phabricator.com/D5610
Summary: Tightens up spacing, remove some of the borders, add alpha channel, make them all blue (sorry, red green and yellow are for 'status'). If we want to do more colors just for hovercards, I have a brown and a black in the mock, but would like to try just blue for now.
Test Plan: UIExamples, Tasks, People, Diffs, and Pastes.
Reviewers: epriestley, AnhNhan, btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5609
Summary:
Refs T1048, T2902 - This //should// fix flickering hovercards. Probably does not fix displaced hovercards, though could (because of the flickering doing something bad to rendering).
I'm bad with JS D:
Test Plan: Tried out plenty of reload & hover combos. No flickering anymore. Never again.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5607
Summary:
With freetext fields, most tasks would have attached revisions when they have attached commits.
See T1048 for example.
Merge these two fields together.
Test Plan:
Displayed task with commit and unrelated revision.
Displayed task with commit and related revision:
{F39394,size=full}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5601
Summary:
Also join concepts of installed and enabled applications.
Also respect uninstalled Maniphest where disabled Maniphest was checked.
Test Plan:
Visited T1, D1.
Uninstalled Maniphest then visited T1, D1.
Disabled Maniphest then visited T1.
Visited /config/edit/maniphest.enabled/.
Reviewers: epriestley, Afaque_Hussain, edward
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5602
Summary: At least for non-workboard views, try plain text for author information instead of profile images. Some discussion in D5451.
Test Plan:
{F39411}
{F39412}
{F39413}
{F39414}
{F39415}
{F39416}
Reviewers: chad
Reviewed By: chad
CC: AnhNhan, aran
Differential Revision: https://secure.phabricator.com/D5605
Summary: Refs T1048 - disables bg repeat, centers profile image
Test Plan: looked at my own hovercard in my local install, which has a non-square prof pic
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5604
Summary:
Currently, `isInstalled()` and `getAllInstalledApplications()` are inconsistent:
- `isInstalled()` returns true for beta apps, even if `phabricator.show-beta-applications` is false.
- `getAllInstalledApplications()` omits beta apps if `phabricator.show-beta-applications` is false.
Making the beta config control installs (not just homepage visibility) makes far more sense as we roll out more thorough application integrations.
Make `isInstalled()` respect beta, and clean up some callsites.
D5602 builds on this.
Test Plan: Installed/uninstalled beta apps, verified Conpherence menu/panel and other application integrations dropped out of the UI.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5603
Summary:
Currently PhabricatorSetupIssueView will show the current values of
configuration options regardless of whether or not they are defined
as hidden options. This means that if the MySQL server stops, Phabricator
will present the MySQL connection credentials to anyone who can access
the Phabricator page.
Test Plan:
Stop the MySQL server for a Phabricator instance. It should display 'hidden'
instead of the MySQL password.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5596
Summary: MySQL is not able to use indexes with searching for tuples.
Test Plan:
Explained the query before and after, saw `key_len` 16 instead of 8.
Also saw time 0.0 s instead of 2.9 s (but that was probably caused by warming up).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5580
Summary:
Refs T1048
Adding Differential Hovercard EventListener
Adding People Hovercard EventListener
Adding basic Diffusion hovercard
Adding Conpherence Hovercard EventListener
Test Plan:
Used in a combo with working hovercards. So beautiful.
Also visited test page. Works alright.
awesometown
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5576
Summary:
So I don't have to copy/paste everything again.
Used them at places I could find with my limited `grep` skills.
Test Plan: Visited hovercards, revision and tasks. No crashes.
Reviewers: epriestley, btrahan, chad
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5592
Summary:
Refs T1048 - Take this setup:
D123D321
Hover with the mouse over one object, and move to another one before it got loaded. You'll have two hovercards. Of these you can't get rid of one anymore. Not through resizing, not through showing another hovercard. (You may have to try a few times). I think it only happens when #2 loads faster than #1. #2 is displayed, then #1 gets loaded and draws.
Or something like that. You could have a race condition where one draws after another and overwrites the current node/anchor, without hiding it. This renders the previous card unhideable, even on resize / mouse far away.
Test Plan:
Did a repro by hovering a lot.
Applied this change. Could not repro anymore.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5594
Summary: we don't post enough so this got reported as broken. Instead of specifying a published after date, just let the query class fetch the natural pagination limit ordered by id, and PHP will sort by publishedDate per usual. While its possible we might not get the right stuff relative to published date, its highly, highly unlikely given the large pagination size.
Test Plan: loaded up the blog xml link
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5593
Summary: See discussion in D5563. This loads hovercards on-demand, and shows them once they load. Ref T1048.
Test Plan: Made a preview comment like `T1`, waved my mouse over it, got a hovercard shortly thereafter.
Reviewers: AnhNhan
Reviewed By: AnhNhan
CC: aran
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5588
Summary:
Refs T1048 - Use `PhabricatorTagView` in user mention remarkup rules. Emits hovercards now :D
Also introduces `PhabricatorTagView::COLOR_INEXISTENT`
Test Plan: Inspected HTML to find sigil & meta ref. Hovered above them (with hovercard patch, sold separately). Hovercard appeared.
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5573
Summary:
Refs T1048; Depends on D5557, D5558
They hover right above your eyes. Try it out at home :D (in that case, don't forget to checkout D5557 and D5558)
Worth a lot of improvement. But it's great for now after a little bit of styling.
Scrape load (search current document for all hovercards and pre-load them) and lazy load (e.g. previewing comments which is not covered by scrape load) implemented.
Added some seemingly useful graceful situations. Too much to the left, too much to the top.
Test Plan:
Tested on Ubuntu, Chrome and FF. No Windows yet, since I have it live at no place. Works pretty fine, at least it will appear.
Could test left graceful fallback. Don't know what happens if you place it too far to the top. I expect either good results or placement about the center of the screen in case of glitches.
For now, they'll disappear right away once the mouse leaves the object tag. Intended is when leaving both tag and hovercard.
Reviewers: epriestley, chad, btrahan
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5563
Conflicts:
src/__celerity_resource_map__.php
Summary: Missed this when fixing this morning.
Test Plan: reload action headers in uiexamples.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5586
Summary:
Refs T1048; Depends on D5571 - Use names instead of `substr($handle->getType(), 0, 1).$handle->getAlternateID()`, which did not work for 70% of the handles
This, of course, breaks UI Examples, which was pretty off before anyway.
Unbreak UIExamples.
Test Plan: UIExamples, Hovercard Controller in human test mode
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1048
Differential Revision: https://secure.phabricator.com/D5572
Summary: Initial pass at an action header. The idea is to support current and future planned needs in 'headers' with various colors and icons. The overall goal here is to keep markup light and allow other classes to wrap and extend with more specific features.
Test Plan: Tested UIExamples and Workboards.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5585
Summary:
Sometimes it seems necessary to force a reparse of recent commits in
production, it took me longer than expected to get this right.
To make this easier, document the usage of --min-date
further with usage examples and print a usage exception with the input
if the supplied value isn't accepted by MySQL.
(otherwise all commits will be affected in the case of user error)
Test Plan:
.. create TEST repo with commits dated 2013-04-03 ..
$ ./reparse.php --all TEST --owners --min-date "2013a-04-03 10:30:19"
.. see usage exception - invalid timestamp ..
$ ./reparse.php --all TEST --owners --min-date "2013-04-03 10:30:19"
.. reparse commits ok ..
$ ./reparse.php --all TEST --owners --min-date "2013-04-04 10:30:19"
.. see 'No commits have been discovered' ..
$ ./reparse.php --all TEST --owners
.. reparse commits ok ..
$ ./reparse.php --help
.. looks ok to me ..
$ ./reparse.php --all TEST --owners --min-date 2013-04-03 10:30:19
.. see error - interprets 10:30:19 as commit and refuses ..
$ ./reparse.php --all TEST --owners --min-date <<first commit time>>
.. parse this commit and following ..
$ ./reparse.php <<revision_id>> --owners --min-date <<first commit time>>
.. see error - insist on --all if --min-date ..
$ ./reparse.php <<revision_id>> --owners
.. ok ..
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5579
Summary: this just does the back-end migration. I realized that we don't need to keep track of cacheTitle and cachePhoto since those are based off recent participation handles and dynamic relative to who is viewing it. Also kept the "last seen phid" as I think that will be useful to have auto-scroll to where you last read. Ref T2867.
Test Plan: did the migration. observed sensical values in the database. created a new conpherence - again sensical values. updated a conpherence - more sensical values.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T2867
Differential Revision: https://secure.phabricator.com/D5567
Summary:
Let applicationtransaction editors request locks when applying certain transactions. See D5567.
We should probably do this for all not-guaranteed-safe operations, but let's put our toe in the water with Conpherence first. I believe the cost of these locks is very small and my cautious stance toward acquiring them isn't really warranted, but I've also never seen, e.g., a race on a title edit.
Test Plan: Added comments with and without locks, verified both pathways worked correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5582
Summary:
This sets more reasonable values for the object handle fields imo. It's not like I ever want to find out what letter to use and then do `substr($handle->getType(), 0, 1).$handle->getID()` to get `D1` each time I use handles.
Name:
- D1
- T1
- M1
- P1
- etc.
Fullname:
- D1: Something
- T1: Something
- etc.
In addition, this helps me to reasonable prefill Hovercards in case there is no application-specific event listener.
Also deletes `title` and `alternateID` completely. They deserved that.
Test Plan:
Visited places, nothing broke (We only ever used `$handle->getName()` for users and commits).
Tested mail reply handler. Did not test the other way around, but should be fine.
Hovercards broken until D5572 (would love to induce a cyclic dependency)
Reviewers: epriestley, chad, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5571
Summary: Long ago this was a symlink, but now it's a shell script because symlinks and Windows don't really work. Fixes T2884.
Test Plan: Inspection.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2884
Differential Revision: https://secure.phabricator.com/D5575
Test Plan: go to the new task page, go to the 'Assign To' field, assign the task to someone and try to do a Shift-Tab to return to the title field
Reviewers: igoleo, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Maniphest Tasks: T2760
Differential Revision: https://secure.phabricator.com/D5547
Summary: Added a new way of filtering projects in Maniphest custom queries. This will filter on any project that a user is associated with.
Test Plan:
- Create some tasks.
- Create a project (auto join).
- Add the project to some of the tasks.
- Run custom query, see the correct task.
- Save custom query, check the same tasks are there.
- Add the project to another task, check task was added in the custom query list view.
- Remove the project from a task and check the task disappeared from the custom query list view.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5570
Summary: First pass at 'action icons' for headers and other items. Ties into future diff.
Test Plan: photoshop, read the css.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5565
