Summary: didn't quite get there in D12309
Test Plan: made a revert commit and inspected my feed and it was correct (screenshot shortly)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12333
Summary: Add some more translations to make the interface very wow (Thanks to Robert Calaceto)
Test Plan: Squinted my eyes and stared at the UI until stuff made sense.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, chad, epriestley
Differential Revision: https://secure.phabricator.com/D12312
Summary: I think D11212 missed the feed variants. add 'em.
Test Plan: hope and pray and push to prod and see
Reviewers: joshuaspence, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12309
Summary: In its current form, this file is not being linted. This doesn't seem to be intentional.
Test Plan: Introduced a linter error and ran `arc lint`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12282
Summary: These arrays looks a little odd, most likely due to the autofix applied by `ArcanistXHPASTLinter::LINT_ARRAY_SEPARATOR`. See D12296 in which I attempt to improve the autocorrection from this linter rule.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12281
Summary:
Fixes T7484. There's a bunch of spooky mystery here but the current behavior can probably cause problems in at least some situations.
Also moves a couple callsigns to monograms (see T4245).
Test Plan:
- Faked a short lock length to hit the exception.
- Updated normally.
- Grepped for other use sites, none seemed suspicious or likely to overflow the lock length.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7484
Differential Revision: https://secure.phabricator.com/D12263
Summary: Fixes T7720. We currently leak the "draft" state of checkboxes; never treat checkboxes as drafts if you can't mark them.
Test Plan: Checked a box, reloaded page in other browser. Previously, the draft state partially propagated. Now, it no longer does.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7720
Differential Revision: https://secure.phabricator.com/D12262
Summary: Added Submit translation for Very Wow Locale
Test Plan: Look at the code and hope it works
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12254
Summary: Ref T7689. Ref T4100. This advances the goals of removing `loadViewerHandles()` (only 67 callsites remain!) and letting tokenizers some day take token functions like `viewer()` and `members(differential)`.
Test Plan:
- Sent a new message; used "To".
- I simplified the cancel URI construction slightly because it's moot in all normal cases.
- Edited a thread; used "Add Participants".
- Searched rooms; used "Participants".
- Searched countdowns; used "Authors".
- Created a diff; used "Repository".
- Edited a revision; edited "Projects"; edited "Reveiwers"; edited "Subscribers".
- Searched for revisions; edited "responsible users"; "authors"; "reviwers"; "subscribers"; "repositories".
- Added revision comments; edited "Add Reveiwers"; "Add Subscribers".
- Commented on a commit; edited "Add Auditors"; "Add subscribers".
- Edited a commit; edited "Projects".
- Edited a repository; edited "Projects".
- Searched feed, used "include Users"; "include Proejcts".
- Searched files, used "authors".
- Edited initiative; edited "Projects".
- Searched backers; used "Backers".
- Searched initiatives; used "Owners".
- Edited build plans; edited "Run Command".
- Searched Herald; used "Authors".
- Added signature exemption in Legalpad.
- Searhced legalpad; used "creators"; used "contributors".
- Searched signatures; used "documents"; used "signers".
- Created meme.
- Searched macros; used "Authors".
- Used "Projects" in Maniphest reports.
- Used Maniphest comment actions.
- Edited Maniphest tasks; edited "Assigned To"; edited "CC"; edited "projects".
- Used "parent" in Maniphest task creation workflow.
- Searched for projects; used "assigned to"; "in any projec"; "in all projects"; "not in projects"; "in users' projects"; "authors"; "subscribers".
- Edited Maniphest bug filing domains, used "Default Author".
- Searched for OAuth applications, used "Creators".
- Edited Owners pacakge; edited "Primary Owner"; edited "Owners".
- Searched for Owners packages; used "Owner".
- OMG this UI is OLD
- Edited a paste; edited "Projects".
- Searched for paste; used "Authors".
- Searched user activity log; used "Actors"; used "Users".
- Edited a mock; edited "Projects"; edited "CC".
- Searched for mocks; used "Authors".
- Edited Phortune account; edited "Members".
- Edited Phortune merchant account; edited "Members".
- Searched Phrequent; used "Users".
- Edited Ponder question; sued "projects".
- Searched Ponder; used "Authors"; used "Answered By".
- Added project members.
- Searched for projects; used "Members".
- Edited a Releeph product; edited "Pushers".
- Searched pull requests; searched "Requestors".
- Edited an arcanist project; used "Uses Symbols From".
- Searhced push logs; used "Repositories"; used "Pushers".
- Searched repositories; used "In nay project".
- Used global search; used Authors/owners/Subscribers/In Any Project.
- Edited a slowvote; used "Projects".
- Searched slovotes; used "Authors".
- Created a custom "Users" field; edited and searched for it.
- Made a whole lot of typos in this list. ^^^^^^
Did not test:
- Lint is nontrivial to test locally, I'll test it in production.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100, T7689
Differential Revision: https://secure.phabricator.com/D12224
Summary:
Ref T1460. Overall:
- Pass `objectOwnerPHID` consistently.
- Pass viewer consistently.
- Set the correct draft state for checkboxes on the client.
Test Plan:
- Made inline comments in Differential.
- Made inline comments in Diffusion.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12186
Summary:
Rebuilds the UI in Differential commenting. Specifically we look at the following design patterns:
**To the author:**
- The author of the diff should be able to easily identify what comments are done and not done.
- We keep undone comments yellow
- Clicking done turns comment block into 'unsubmitted state'
**To the reviewer:**
- Easier understanding of unsubmitted states
- All conversations to be yellow/important
**Todo**
- Not all color CSS states correct
- Unpulished checkbox support
Test Plan:
Test leaving comments, published and unpublished. Checking Done, unpublished and published. Check delete states.
From the Diff Author's perspective:
{F352094}
For a Diff commenter's perspective:
{F352095}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T1460, T7660, T7503
Differential Revision: https://secure.phabricator.com/D12171
Summary:
This returns the PHID of the current revision owner, or the commit author, if one exists.
NOTE: For drafts, we currently return `null`; I'll fix that in a future change. Should be correct for submitted comments.
Test Plan: Added an inline, nothing seemed broken.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12185
Summary: Ref T6755. I'll add some notes there about specifics.
Test Plan:
- Made connections to HTTP and HTTPS URIs.
- Added some debugging code to verify that HTTP URIs were pre-resolved.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12169
Summary:
Fixes T7664. When there are a large number of tasks (400+) with the same subpriority (which can happen if the subpriority features are rarely used), it may take more than 30 seconds to rebalance them.
Make the algorithm more aggressive about rebalancing homogenous blocks of tasks.
This may need to get even fancier, but I'd guess it can process blocks 1-2 orders of magnitude larger, which should be ~all installs.
(If someone still hits issues with this, I'll make it fancier.)
Once a block is rebalanced, it doesn't need to be rebalanced again (at least, not as a whole block) so we basically just need to get over the initial hurdle here and then we're good.
In the worst case, we can provide `bin/maniphest rebalance` or similar and do the rebalance step offline.
And, in any case, we have more test coverage here now.
Test Plan:
- Existing tests.
- New tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D12166
Summary: Ref T7660. I'm not toggling "inline-state-is-draft" correctly in JS yet since it's a little tricky (you can reload to see it) but the main state should work.
Test Plan:
- Clicked "done", saw comment opacity fade with placeholder style.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7660
Differential Revision: https://secure.phabricator.com/D12160
Summary:
Ref T1460. When a revision author updates/comments/etc on a revision, publish all their checkmarks.
This doesn't handle Diffusion/audits yet.
Test Plan: {F346870}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12126
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Ref T6755. This is a partial fix, but:
- Allow netblocks to be blacklisted instead of making the feature all-or-nothing.
- Default to disallow requests to all reserved private/local/special IP blocks. This should generally be a "safe" setting.
- Explain the risks better.
- Improve the errors rasied by Macro when failing.
- Removed `security.allow-outbound-http`, as it is superseded by this setting and is somewhat misleading.
- We still make outbound HTTP requests to OAuth.
- We still make outbound HTTP requests for repositories.
From a technical perspective:
- Separate URIs that are safe to link to or redirect to (basically, not "javascript://") from URIs that are safe to fetch (nothing in a private block).
- Add the default blacklist.
- Be more careful with response data in Macro fetching, and don't let the user see it if it isn't ultimately valid.
Additionally:
- I want to do this check before pulling repositories, but that's enough of a mess that it should go in a separate diff.
- The future implementation of T4190 needs to perform the fetch check.
Test Plan:
- Fetched a valid macro.
- Fetched a non-image, verified it didn't result in a viewable file.
- Fetched a private-ip-space image, got an error.
- Fetched a 404, got a useful-enough error without additional revealing response content (which is usually HTML anyway and not useful).
- Fetched a bad protocol, got an error.
- Linked to a local resource, a phriction page, a valid remote site, all worked.
- Linked to private IP space, which worked fine (we want to let you link and redierect to other private services, just not fetch them).
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12136
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary:
Ref T7149. When users give us dumpfiles for import, they will almost inevitably use the `phabricator` namespace. They need to be renamed to use an instance namespace.
We can do this either by:
- importing the data first, then renaming; or
- renaming first, then importing.
This implements the second one, basically `storage renamespace --in dump.sql --from phabricator --to instancename > instance.sql`.
Renaming first is a little hackier since we have to `preg_match()` a SQL dump file, but I think it's better overall:
- With only one database, it lets you dump/import without downtime.
- If you have development stuff in a development environment in the `phabricator` namespace, you don't have to move it aside to do an import.
- No possibility that two people doing an import at the same time on the same box will collide with each other.
- You can do the rename once and then repeat the import process with the renamed dump more easily.
- No tricky stuff with modern Phabricator running against an old dump and the database names not matching up.
None of this is super important, but it just makes large dumps a bit easier to work with, and the dumpfile format is regular enough that this seems unlikely to ever really not work.
Test Plan: Renamespaced a dump, did a `diff -u`, saw all the relevant parts changed (and only those parts changed).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12105
Summary:
Ref T7522. This seems like the least-bad approach to a messy issue:
- When backfilling accounts from an imported instance, I need to write ExternalAccount rows to the instance to link instance accounts with upstream accounts.
- We do this in the daemons in some other cases, which lets us run all the code in the context of the instance. However, I really want to do this in-process here because it's way way simpler and we need to do writes to //both// the instance and the upstream, and they're interleaved, and they depend on one another.
- I can hard-code the query with `qsprintf()` but that feels like 100x worse than this.
This allows me to do this:
```
id(new PhabricatorExternalAccount())
->setForcedConnnection($instance_conn)
->...
->save();
```
...and get a write to the instance database, which is at least not completely a minefield.
Test Plan: Backfilled instance accounts and got interleaved instance and upstream writes as expected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12098
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T2009. Ref T1460. The way Diffusion and Differential load inlines is horrible garbage right now:
- Differential does an ad-hoc query to get the PHIDs, then does a real load to policy check.
- Diffusion completely fakes things. In practice this is not a policy violation, but it's dangerous.
Make TransactionCommentQuery extensible so we can subclass it and get the query building correctly in the right Query layer.
Specifically, the Diffusion and Differential subclasses of this Query will add appropriate `withX()` methods to let us express the query in SQL.
Test Plan: Loaded, previewed, edited, and submitted inlines in Differential and Diffusion
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009, T1460
Differential Revision: https://secure.phabricator.com/D12026
Summary:
Ref T1460. Ref T2618.
When publishing a draft inline, mark the inline it replies to (if any) as replied to.
Also, don't load deleted comments as drafts (sets the stage for T2618).
I'll make an effort to clean up the loading mess here in the next revision, and find some more appropriate home for the shared code.
Test Plan: Made and replied to comments in Differential and Diffusion. Saw comments get marked as "Has Replies" and "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2618, T1460
Differential Revision: https://secure.phabricator.com/D12025
Summary: Ref T2009. These subclasses have a mixture of similar methods, move them all to the base class.
Test Plan: Created/edited/undo/submitted comments on the left and right sides of a diff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12024
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary: Ref T2009. This has two more copies of the scaffolding.
Test Plan: Created, edited, deleted, replied to inline comments.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12018
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary:
Ref T2009. Currently, the code figures out if a comment is on the left or right by looking at the `<th />` preceeding the enclosing `<td />`.
This gets the right result in 2-up, but in 1-up rows are always `<th />`, `<th />`, `<td />`, so it always detects every inline as being in the new file.
Because "old" and "new" cells aren't inherently distingushable in the 1up view, we can't use a DOM test for this at all. Instead, just track this state explicitly.
Test Plan:
- Made left/right comments in 1up view and 2up view.
- Viewed them in 1up and 2up views.
- Hovered in 1up and 2up views.
- Diff-of-diff'd and reviewed old/new comments, then made some more.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12011
Summary: Ref T2009. Remove the 4 (!!) copies of this code.
Test Plan:
- Added, edited, and removed inline comments in 2up view.
- Stacked a bunch of comments on the same line and saw the JS place them correctly.
- Created an image diff and added, edited and removed inlines on it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12000
Summary:
Ref T2009. Inline comments have "scaffolding", which is basically some empty table cells/rows around them to get the layout correct.
The scaffolding depends on the renderer, since the cells are different for side-by-side vs unified diffs.
This is currently duplicated all over the place:
- Edit view has 1up/2up.
- Detail view has 1up/2up.
- 1up renderer has 1up.
- 2up renderer has four separate copies of the 2up logic.
These all have subtle differences, which are mostly bugs. Start making the scaffolding more composable so we can get rid of that mess.
Test Plan: Added, edited, and removed inline comments on unified and side-by-side diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11997
Summary:
Ref T2009. These classes are "Differential" now, but are used elsewhere in diff infrastructure (e.g., Diffusion).
- Rename them to "PHUIDiff".
- Move them to "src/infrastructure/".
- Give them a base class.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11996
Summary: Uses standard sidenav width, more spacing in labels, added background around textarea, make background work in Firefox.
Test Plan:
Test Desktop, Mobile, and Tablet break points. Test Firefox and Chrome.
{F331201}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11993
Summary:
Ref T2009. This reduces how buggy inlines are. They're still buggy.
Specifically, the inline endpoint didn't know how to scaffold inlines before, so some of them ended up rendering in the wrong rows or breaking layouts.
This passes the current renderer through to the inline editor endpoint, so it can at least get the layout correct.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11988
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary:
Ref T2009. This basically copy/pastes them for now. Plans is:
- Make this actually work all the way.
- Add test coverage after D11970.
- Move 2-up here after test coverage.
Clicking the links does not work yet, because they use the 2-up renderer. I'll fix this in the next diff.
Test Plan: Viewed diffs in unified, saw links to show more.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11976
Summary:
Fixes T7422. After the recent fix for "sort" columns, we can end up with invalid SQL in some cases when running quickstart.
In particular, we do "COLLATE binary CHARACTER SET utf8_general_ci" (which is invalid).
Preprocess these so we get "COLLATE utf8 CHARACTER SET utf8_general_ci" (which is valid and correct).
Test Plan: Ran `bin/storage upgrade -f --namespace blahblhbaba` with and without `--disable-utf8mb4`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7422
Differential Revision: https://secure.phabricator.com/D11929
Summary:
Fixes T7287. This trades off 4-byte character support for case insensitivity in these columns, which is a much better trade on the balance.
Also adds more warnings about old MySQL. Note that we already issue a warning when you run "storage adjust" (which I've made stronger) and already "strongly recommend" MySQL 5.5 or newer in the install documentation.
Test Plan:
- Ran `storage adjust --disable-utf8mb4` to go to old definitions, then ran `storage adjust` to get back to the new ones. Everything seemed OK in both cases.
- Verified that utf8mb4 data can be migrated out of these colums with `--unsafe` (which will truncate).
- Verified that manual explains this.
- Faked my way into the setup warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7287
Differential Revision: https://secure.phabricator.com/D11893
Summary:
Ref T7352. Make sure modern `phd stop` can still read the old PID file format and stop the daemons, at least for now.
Without this, `stop` still detects them and tells you to `stop --force`, which works, but this makes things a good deal cleaner.
Test Plan: Ran `phd stop` from master, then `phd stop` from this revision. Saw old daemons stop cleanly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11873
Summary:
Fixes T7352. This reduces the memory footprint for instances by combining these two similar daemons into one daemon which handles the responsibilities of both.
The fit isn't 100% perfect here but it's pretty close, and the GC daemon is fairly trivial.
Test Plan:
- Adjusted all the numbers to small numbers (5 second sleep, 120 second GC length).
- Added a ton of logging.
- Started trigger daemon.
- Saw it run a GC cycle.
- Saw it reschedule another cycle after 120 seconds (adjusted down from 4 hours).
- Reverted all the logging/small numbers.
- Ran `bin/phd start`, saw stable trigger daemon running.
- Grepped for removed daemon class name.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11872
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T7352. We were previously identifying things by `<daemonClass, overseerPID, startTime>` but that's not unique in a world where one overseer can run multiple daemons.
We already have an internal "daemonID", it just doesn't get written into the DB right now.
Start writing it, then use it to clean up `phd status`.
Test Plan: Ran `phd status`, got more accurate/useful output than previously.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11865
Summary: Ref T7352. This makes `phd stop` and `phd status` produce more reasonable output with the new PID file format.
Test Plan: Ran `phd stop`, `phd status`, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11856
Summary:
Ref T7352. This changes `phd` to pass configuration to overseers over stdin. We still run one overseer per daemon.
The "status" stuff needs some cleanup, but it's mostly just UI/cosmetic.
Test Plan:
- Ran `phd debug`, `phd launch`, `phd start`, `phd status`, `phd stop`, etc.
- Verified PID files write in a reasonable format.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11855
Summary:
We currently cache previews, but the vast majority of previews are never rendered again (e.g., they're a preview of someone partway through typing a comment).
Especially when editing large documents (Legalpad, Phriction), this can bloat the markup cache with data that will never be read and won't get purged for 30 days.
In particular, most of the data on `admin.phacility.com` is currently 1,000 previews of legalpad documents as I made minor edits to them over the course of several hours.
This isn't a big concern, but it's a very easy fix.
Test Plan:
- Previewed a legalpad document, verified that cache rows were not written as I mashed the keyboard.
- Saved the document, verified a new cache row was written.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11832
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary: Fixes T7319. These need a "%s" for the count where they had a "%d"
Test Plan: plan in D11812 is no longer a lie! (watcher added / removed strings render correctly)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7319
Differential Revision: https://secure.phabricator.com/D11813
Summary: Fixes T7319. ...except I can't get this working in my sandbox? Changes to the translation file don't seem to show up. TEST PLAN IS A LIE
Test Plan: became a watcher, un became a watcher - saw sensical translated strings
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7319
Differential Revision: https://secure.phabricator.com/D11812
Summary:
Right now, taskmasters on empty queues sleep for 30 seconds. With a default setup (4 taskmasters), this averages out to 7.5 seconds between the time you do anything that queues something and the time that the taskmasters start work on it.
On instances, which currently launch a smaller number of taskmasters, this wait is even longer.
Instead, sleep for the number of seconds that there are taskmasters, with a random offset. This makes the average wait to start a task from an empty queue 1 second, and the average maximum load of an empty queue also one query per second.
On loaded instances this doesn't matter, but this should dramatically improve behavior for less-loaded instances without any real tradeoffs.
Test Plan: Started several taskmasters, saw them jitter out of sync and then use short sleeps to give an empty queue about a 1s delay.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11772
Summary: Ref T7152. Gives us an event hook so we can go make users a member of any instance they've been invited to as soon as they verify an email address.
Test Plan:
- Used `bin/auth verify` to trigger the event.
- Build out the invite flow in rSERVICES.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152
Differential Revision: https://secure.phabricator.com/D11752
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary:
Ref T7152. Ref T3554.
- When an administrator clicks "send invites", queue tasks to send the invites.
- Then, actually send the invites.
- Make the links in the invites work properly.
- Also provide `bin/worker execute` to make debugging one-off workers like this easier.
- Clean up some UI, too.
Test Plan:
We now get as far as the exception which is a placeholder for a registration workflow.
{F291213}
{F291214}
{F291215}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T7152
Differential Revision: https://secure.phabricator.com/D11736
Summary: Minor spring cleaning, improve the visual feel of the comments table, more consistent structure.
Test Plan:
Test multiple comments, long comments, short comments, and multiple lines.
{F282462}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11666
Summary:
Ref T7208. Now that we have approvals (new installs are safe by default), take those into account when generating this warning.
Try to soften the warning to cover the case discussed in T7208, hopefully without requiring additional measures.
Test Plan:
{F286014}
{F286015}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7208
Differential Revision: https://secure.phabricator.com/D11708
Summary: mysqldump output can end up having weird encoding issues when raw BLOBs are in the output, preventing the backup restoration from succeeding. This hex-encodes blobs in the dump from the backup workflow causing the output file to only contain ASCII and ensure imports are successful.
Test Plan: Had issues restoring a backup from the original `mysqldump` command issued by this workflow. Ran the same command with this flag added and I was able to restore the backup.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11704
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary: Fixes T7111. Also nails out the TODO to show the username
Test Plan: fired up the ole phabot, chatted "P123" and saw "P123: https://secure.phabricator.com/P123 - Masterwork From Distant Lands by epriestley"...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7111
Differential Revision: https://secure.phabricator.com/D11664
Summary: Use `PhutilXHPASTBinary` methods instead of `xhpast_parse` functions. Depends on D11517.
Test Plan: N/A, this is a direct swap.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11612
Summary:
Ref T6881.
- Fix dead links.
- Let implementations provide more information.
- Provide more information to implementations.
Test Plan: Links work, invoices show billing periods, fewer "Subscription 6" crumbs, all is well in the world.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11601
Summary:
Ref T6881. This adds the worker, and a script to make it easier to test. It doesn't actually invoice anything.
I'm intentionally allowing the script to double-bill since it makes testing way easier (by letting you bill the same period over and over again), and provides a tool for recovery if billing screws up.
(This diff isn't very interesting, just trying to avoid a 5K-line diff at the end.)
Test Plan: Used `bin/phortune invoice ...` to get the worker to print out some date ranges which it would theoretically invoice.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11577
Summary: Fixes T1476. The body of the email should be just the output of some diff command.
Test Plan:
git diff master > text.txt; ./bin/mail receive-test --to <configured-diff-create-address> < text.txt; a diff was successfully created...! email generated had a working link to the diff.
./bin/mail receive-test --to <configured-diff-create-address> < README.md; a diff was not created as expected...! email generated had a sensical error message, telling me that the mail body should have been generated via a diff command
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: johnny-bit, Korvin, epriestley
Maniphest Tasks: T1476
Differential Revision: https://secure.phabricator.com/D11574
Summary:
Hit this locally, with an error like:
> Version <empty string> is older than 1.9, the minimum supported version.
(Where `<empty string>` was just the empty string, not literally the text `<empty string>`.)
Be more careful about parsing versions, and parse the newer string.
Test Plan: Got "unknown version" with intentionally-broken test data, then clean readout.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11558
Summary: Fixes T7078. Adds a `./bin/storage shell` command which passes through to a MySQL shell. This is slightly more convenient than running `mysql` manually.
Test Plan: Ran `./bin/storage shell` and got a MySQL shell.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7078
Differential Revision: https://secure.phabricator.com/D11548
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary:
Ref T7034.
In a cluster environment, when a user connects with a VCS request over SSH (like `git pull`), the receiving server may need to proxy it to a server which can actually satisfy the request.
In order to proxy the request, we need to know which repository the user is interested in accessing.
Split the SSH workflow into two steps:
# First, identify the repository.
# Then, execute the operation.
In the future, this will allow us to put a possible "proxy the whole thing somewhere else" step in the middle, mirroring the behavior of Conduit.
This is trivially easy in `git` and `hg`. Both identify the repository on the commmand line.
This is fiendishly complex in `svn`, for the same reasons that hosting SVN was hard in the first place. Specifically:
- The client doesn't tell us what it's after.
- To get it to tell us, we have to send it a server capabilities string //first//.
- We can't just start an `svnserve` process and read the repository out after a little while, because we may need to proxy the request once we figure out the repository.
- We can't consume the client protocol frame that tells us what the client wants, because when we start the real server request it won't know what the client is after if it never receives that frame.
- On the other hand, we must consume the second copy of the server protocol frame that would be sent to the client, or they'll get two "HELLO" messages and not know what to do.
The approach here is straightforward, but the implementation is not trivial. Roughly:
- Start `svnserve`, read the "hello" frame from it.
- Kill `svnserve`.
- Send the "hello" to the client.
- Wait for the client to send us "I want repository X".
- Save the message it sent us in the "peekBuffer".
- Return "this is a request for repository X", so we can proxy it.
Then, to continue the request:
- Start the real `svnserve`.
- Read the "hello" frame from it and throw it away.
- Write the data in the "peekBuffer" to it, as though we'd just received it from the client.
- State of the world is normal again, so we can continue.
Also fixed some other issues:
- SVN could choke if `repository.default-local-path` contained extra slashes.
- PHP might emit some complaints when executing the commit hook; silence those.
Test Plan: Pushed and pulled repositories in SVN, Mercurial and Git.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11541
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Fixes T7050. I got the regexp slightly wrong and didn't catch it because it works fine on modern MySQL.
Test Plan: `arc unit --everything` still passes.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7050
Differential Revision: https://secure.phabricator.com/D11522
Summary:
One advantage I wanted to get out of T1191 is automated rebuilds of `quickstart.sql`. If they don't actually work, I'd like to know sooner rather than later. We haven't rebuilt in a couple months, so give it a shot.
Ran into two issues:
- Some very old patches specify overlong keys which don't work if your default charsets are utf8mb4. Shorten these. No real users have applied these in a very long time.
- Some gymnastics around `corpus` for the new Conpherence search index.
Test Plan:
- Ran `arc unit --everything`, got clean results.
- Cost to do a storage upgrade on an empty namespace dropped from ~4s to ~3s.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11454
Summary: I got these wrong and the test didn't trigger for some reason that I haven't looked into.
Test Plan: `arc unit --everything`
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11453
Summary:
We have to do some garbage nonsense to write database backups right now, see T6996.
When storage isn't initialized, we previously ended up with this message gzipped in a file and an empty error. Make the behavior slightly more tolerable.
Test Plan: Saw a meaningful error after trying to back up an uninitialized database.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11449
Summary:
Ref T6881. I tried to cheat here by not implementing this, but we need it for destroying triggers directly with `bin/remove destroy`, since that needs to load them by PHID.
So, cheat slightly less. Implement PolicyAware but not CursorPagedPolicyAware.
Test Plan:
- Used `bin/remove destroy` to destroy a trigger by PHID.
- Browsed daemon console.
- Ran trigger daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11445
Summary:
Ref T6881. This makes it easier to fire a trigger and make sure it works properly. You can use the `--now` flag to travel through time, and test scheduling conditions with `--last` and `--next`. It will tell you when the trigger would reschedule.
Better than waiting 24 hours to see if things work.
Test Plan: Fired some backups, got useful output which made me think my code probably works correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11438
Summary: Ref T6881. This is useful to show a "Next backup: 2:30 AM" sort of thing without requring callers to know how triggers work internally.
Test Plan: Showed that kind of thing in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11437
Summary:
Ref T6881. By design, the EXECUTION order only selects tasks which have been scheduled (since it performs a JOIN). This is inconsistent with other queries and problematic for withID/withPHID queries which may want to select an unscheduled task.
Switch to standard ID ordering by default.
Test Plan:
- Instances console now finds unscheduled triggers.
- Verified that all existing queries specify an explicit order.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11436
Summary: Ref T6881. When stuff with triggers is destroyed, it should destroy the triggers.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11435
Summary: Ref T6881. Add a standard "just queue a task" trigger action; I expect almost all application code to use this.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11429
Summary: Ref T6881. I just want to show trigger info in the instance management console.
Test Plan: Will test in Instances.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11428
Summary: Ref T6881. Before implementing subscriptions, I'm going to vet triggers by using them to do backups. Each instance will get a daily trigger for backups, and that should give us a smaller-scale test to catch issues and limitations, with more opportunities for something to go wrong since it fires more often.
Test Plan: Added unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11427
Summary:
Ref T6881. Hopefully, this is the hard part.
This adds a new daemon (the "trigger" daemon) which processes triggers, schedules them, and then executes them at the scheduled time. The design is a little complicated, but has these goals:
- High resistance to race conditions: only the application writes to the trigger table; only the daemon writes to the event table. We won't lose events if someone saves a meeting at the same time as we're sending a reminder out for it.
- Execution guarantees: scheduled events are guaranteed to execute exactly once.
- Support for arbitrarily large queues: the daemon will make progress even if there are millions of triggers in queue. The cost to update the queue is proportional to the number of changes in it; the cost to process the queue is proportional to the number of events to execute.
- Relatively good observability: you can monitor the state of the trigger queue reasonably well from the web UI.
- Modular Infrastructure: this is a very low-level construct that Calendar, Phortune, etc., should be able to build on top of.
It doesn't have this stuff yet:
- Not very robust to bad actions: a misbehaving trigger can stop the queue fairly easily. This is OK for now since we aren't planning to make it part of any other applications for a while. We do still get execute-exaclty-once, but it might not happen for a long time (until someone goes and fixes the queue), when we could theoretically continue executing other events.
- Doesn't start automatically: normal users don't need to run this thing yet so I'm not starting it by default.
- Not super well tested: I've vetted the basics but haven't run real workloads through this yet.
- No sophisticated tooling: I added some basic stuff but it's missing some pieces we'll have to build sooner or later, e.g. `bin/trigger cancel` or whatever.
- Intentionally not realtime: This design puts execution guarantees far above realtime concerns, and will not give you precise event execution at 1-second resolution. I think this is the correct goal to pursue architecturally, and certainly correct for subscriptions and meeting reminders. Events which execute after they have become irrelevant can simply decline to do anything (like a meeting reminder which executes after the meeting is over).
In general, the expectation for applications is:
- When creating an object (like a calendar event) that needs to trigger a scheduled action, write a trigger (and save the PHID if you plan to update it later).
- The daemon will process the event and schedule the action efficiently, in a race-free way.
- If you want to move the action, update the trigger and the daemon will take care of it.
- Your action will eventually dump a task into the task queue, and the task daemons will actually perform it.
Test Plan:
Using a test script like this:
```
<?php
require_once 'scripts/__init_script__.php';
$trigger = id(new PhabricatorWorkerTrigger())
->setAction(
new PhabricatorLogTriggerAction(
array(
'message' => 'test',
)))
->setClock(
new PhabricatorMetronomicTriggerClock(
array(
'period' => 33,
)))
->save();
var_dump($trigger);
```
...I queued triggers and ran the daemon:
- Verified triggers fire;
- verified triggers reschedule;
- verified trigger events show up in the web UI;
- tried different periods;
- added some triggers while the daemon was running;
- examined `phd debug` output for anything suspicious.
It seems to work in trivial use case, at least.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11419
Summary:
Ref T6881. This will probably make more sense in a couple of diffs, but this is a class that implements scheduling/recurrence rules. Two rules are provided:
- Trigger an event at a specific time (e.g., a meeting reminder notification).
- Trigger an event on the Nth day of every month (e.g., a subscription bill).
At some point, we'll presumably add a rule for T2896 (maybe using the "RRULE" spec) so you can do stuff like "the second to last thursday of every month", etc., but we don't need that for now.
(The "Nth day of every month, or move it back if no such day exists" rule doesn't seem to be expressible with the "RRULE" format, so implementing that wouldn't give us a superset of this. I think this rule is correct and desirable for this purpose, though.)
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11403
Summary:
This is unusual, but if `getWorkerInstance()` throws we end up with an undefined `$worker` when recovering from the exception.
Instead, handle this case slightly more gracefully.
The easiest way to hit this is to schedule a task for a worker that doesn't exist (or remove an existing worker, which is what I did to hit it).
Test Plan: Saw a more graceful error recovery; ran some normal successful tasks out of the queue.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11413
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T6822. This method is only called from `PhutilDaemon::execute()` and can be made `protected`.
Test Plan: See D11404.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11405
Summary: Ref T6822. This method is only called from within the `PhabricatorWorker::executeTask()` and `PhabricatorWorker::scheduleTask()` methods.
Test Plan: `grep`ped for `->doWork`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11406
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `LiskDAO::establishConnection()`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11412
Summary: Fixes T6959.
Test Plan: When I was ready to test the feature, the "Daemon & Web config" error already showed up, from having added phd.variant-config. I went meta and changed the value of phd.variant-config to have phd.variant-config. The config error disappeared. I then changed the conpherence setting about conpherence email prefix and the error showed up again. Removing the conpherence config setting made the error disappear once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6959
Differential Revision: https://secure.phabricator.com/D11399
Summary:
Ref T6881. This is part 1 of my 35-step plan to support subscriptions that bill monthly.
Expanding the capabilities of counters will let me use them to create a logical clock on time-based event updates, build a daemon on top of that, and eventually get time-based triggers.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T6881
Differential Revision: https://secure.phabricator.com/D11395
Summary: Fixes T6842. Allow the daemons to always be terminated, even if MySQL is down. I was hoping to be able to optionally enable this behavior with the `--force` flag, but this seems messy.
Test Plan:
```lang=bash
> ./bin/phd start
Freeing active task leases...
Freed 1 task lease(s).
Preparing to launch daemons.
NOTE: Logs will appear in '/var/tmp/phd/log/daemons.log'.
Starting daemons as phd
Launching daemon "PhabricatorRepositoryPullLocalDaemon".
Starting daemons as phd
Launching daemon "PhabricatorGarbageCollectorDaemon".
Starting daemons as phd
Launching daemon "PhabricatorTaskmasterDaemon".
Done.
> service mysql stop
mysql stop/waiting
> ./bin/phd stop
Interrupting daemon 'PhabricatorRepositoryPullLocalDaemon' (4263)...
Interrupting daemon 'PhabricatorGarbageCollectorDaemon' (4271)...
Interrupting daemon 'PhabricatorTaskmasterDaemon' (4287)...
Daemon 4263 exited.
Daemon 4271 exited.
Daemon 4287 exited.
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6842
Differential Revision: https://secure.phabricator.com/D11385
Summary:
Fixes T6548.
- This workflow doesn't work under reasonable configurations and isn't trivial to fix (see T6548).
- We don't need it; this just makes things a little bit faster if you have to migrate everything (e.g., immediately after T1191) and the installs we know about have generally upgraded by now.
- This keeps kicking PKCS8 keys out of cache which is a pain.
Test Plan: Ran `bin/storage adjust` without it doing an implicit cache purge.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6548
Differential Revision: https://secure.phabricator.com/D11377
Summary: Ref T6822. There are a bunch of places where we call `$something->generatePHID(...)` externally (outside of the class). Therefore, these methods need to be `public`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11363
Summary: Ref T6822.
Test Plan: Visual inspection. This method is only called from within the `PhabricatorTestCase` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11245
Summary:
Ref T3165. Builds a dedicated index for Conpherence to avoid scale/policy filtering concerns.
- This is pretty one-off but I think it's generally OK.
- There's no UI for it.
- `ConpherenceFulltextQuery` is very low-level. You would need to do another query on the PHIDs it returns to actually show anything to the user.
- The `previousTransactionPHID` is so you can load chat context efficiently. Specifically, if you want to show results like this:
> previous line of context
> **line of chat that matches the query**
> next line of context
...you can read the previous lines out of `previousTransactionPHID` directly, and the next lines by issuing one query with `WHERE previousTransactionPHID IN (...)`.
I'm not 100% sure this is useful, but it seemed like a reasonable thing to provide, since there's no way to query this efficiently otherwise and I figure a lot of chat might make way more sense with a couple of lines of context.
Test Plan:
- Indexed a thread manually (whole thing indexed).
- Indexed a thread by updating it (just the new comment indexed).
- Wrote a hacky test script and got reasonable-looking query results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3165
Differential Revision: https://secure.phabricator.com/D11234
Summary: Use `PhabricatorAuditEditor` instead of `PhabricatorEdgeEditor` when writing reverts edges. This ensures that a transaction is created in addition to the edge.
Test Plan: Reverted a commit and pushed to remote. Saw a row created in `phabricator_audit.audit_transaction_comment`. Interestingly, I can't actually see the transaction at http://phabricator.local/r${CALLSIGN}${REVERTED_COMMIT_HASH}.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11212
Summary: Modernize remaining edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Browsed around and performed various actions include subscribing, unsubscribing and watching.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11116
Summary:
Ref T2783. Ref T6706.
- Add `cluster.addresses`. This is a whitelist of CIDR blocks which define cluster hosts.
- When we recieve a request that has a cluster-based authentication token, require the cluster to be configured and require the remote address to be a cluster member before we accept it.
- This provides a general layer of security for these mechanisms.
- In particular, it means they do not work by default on unconfigured hosts.
- When cluster addresses are configured, and we receive a request //to// an address not on the list, reject it.
- This provides a general layer of security for getting the Ops side of cluster configuration correct.
- If cluster nodes have public IPs and are listening on them, we'll reject requests.
- Basically, this means that any requests which bypass the LB get rejected.
Test Plan:
- With addresses not configured, tried to make requests; rejected for using a cluster auth mechanism.
- With addresses configred wrong, tried to make requests; rejected for sending from (or to) an address outside of the cluster.
- With addresses configured correctly, made valid requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6706, T2783
Differential Revision: https://secure.phabricator.com/D11159
Summary:
These didn't get translated quite right:
- We need to use `$total_count` because some languages have different words for 1, 2-3, and 4+ things (for example). So the strings might translate as:
- alincoln added a reviewer-one ...
- alincoln added reviewers-few ...
- alincoln added reviewers-many ...
- That is, while English has only "reviewer" and "reviewers", other languages have more plural forms, and "reviewer", "reviewers-few" and "reviewers-many" may be completely different words.
- In English, because we know we always have 2+ in this branch and the only special word is for 1, we can just drop this.
- Anyway, the %4$s stuff is counting assuming that $total_count is included in the string, so these were a off by one.
- See also D11160.
There a probably a couple more of these, but they should be easy enough to hunt down as they crop up.
Test Plan: Saw nice strings instead of empty strings, or invalid strings (after D11160).
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11162
Summary:
Removes an unused PhabricatorFeedStory Parameter from all getTitleForFeed() and getApplicationTransactionTitleForFeed() functions.
Ref D11088 Ref T6545
Test Plan: ran all unit tests and viewed some dashboard feeds
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11146
Summary: Modernize Dashboard edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Attached a panel to a dashboard, observed the expected comment in the transaction view (both ways).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11114
Summary: Modernize Pholio edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Attached a mock to a task, observed the expected comment in the transaction view (both ways).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11113
Summary: Modernize Project edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: Add a member to a project, saw new rows in the `phabricator_project.edge` and `phabricator_user.edge` tables.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11111
Summary:
Ref T4411
I'm not quite sure if this is the right place for this as it will be difficult to provide proper user feedback of why we removed a particular subscriber.
Is the ApplicationTransactionEditor generally the right place to extract mentioned phids in comments?
On the other hand in some cases we cannot really give user feedback why a user was not subscribed (e.g.: commits & diffs)
Adding a diff to a repo where the user mentioned has no view permissions the subscriber is currently still added. Still would have to find where this is donet...
Any other places?
Unrelated: Is there any way to remove a subscriber from a commit/audit ?
Test Plan:
- Edited tasks with the mentioned user having view permissions to this specific task and without
- Raised concern with a commit and commented on the audit with the user having view permissions to the repo and without
- Added a commit to a repo with and without the mentioned user having permissions
- Mention a user in a task & commit comment with and without permissions
- Mentioning a user in a diff description & comments with and without permissions to the specific diff
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, Korvin, epriestley
Maniphest Tasks: T4411
Differential Revision: https://secure.phabricator.com/D11049
Summary: Modernize Differential edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: From previous experience, these changes are fairly trivial and safe. I poked around a little to make sure things looked reasonably okay.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, Krenair, epriestley
Differential Revision: https://secure.phabricator.com/D11074
Summary: These are no longer required after D7076.
Test Plan: `grep`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11107
Summary: These strings are no longer required after D10678.
Test Plan: `grep`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11106
Summary: These are no longer required after D11032.
Test Plan: `grep`
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11104
Summary: Modernize Ponder edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan: I couldn't actually figure out how to get these strings to show up anywhere.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Krenair, chad, epriestley
Differential Revision: https://secure.phabricator.com/D11083
Summary: Modernize Legalpad edges to subclass `PhabricatorEdgeType`. Largely based on D11045.
Test Plan:
# Created a Herald rule to require legal signatures on all diffs.
# Created a new diff.
# Saw the transaction string appear correctly.
I wasn't able to check the inverse transaction because there is none. Also, I couldn't see any text on the feed (presumably, transactions authored by Herald do not generate feed items)
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Krenair, chad, epriestley
Differential Revision: https://secure.phabricator.com/D11082
Summary:
Ref T2783. Currently, the repository edit page does some checks agaisnt the local system to look for binaries and files on disk. These checks don't make sense in a cluster environment.
Ideally, we could make a Conduit call to the host (e.g., add something like `diffusion.querysetupstatus`) to do these checks, but since they're pretty basic config things and cluster installs are advanced, it doesn't seem super worthwhile for now.
Test Plan: Saw fewer checks in a cluster repo.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11102
Summary: Ref T5402.
Test Plan:
- Queried archived tasks.
- Grepped for use sites and verified no other callsites are order-sensitive.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11089
Summary: This is dead code.
Test Plan: These edge types don't actually seem to be used?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11076
Summary: I don't have `hg` yet on my new laptop; we should just skip tests if the user is missing binaries. Add a convenience method to do this.
Test Plan: Got clean `arc unit --everything` with no `hg` installed.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11051
Summary: Fixes T6795. Fixes T6813. We can give more tailored instructions for surplus schemata than we currently do, and provide more information on resolving them.
Test Plan:
- Ran `storage adjust` with just surplus schemata (friendly warning).
- Ran `storage adjust` with surplus schemata and other serious errors (more severe error).
- Read document.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6795, T6813
Differential Revision: https://secure.phabricator.com/D11054
Summary: Ref T5402. This more or less "fixes" it but there's probably some polish to do?
Test Plan:
stopped and started daemons. error logs look good.
ran bin/storage upgrade. noted that `adjust` added the appropriate indices for active and archive task.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11044
Summary: Ref T5402. This cleans up some code and sets us up to use this sort of data more easily later.
Test Plan: viewed the daemon console from the web and the log of a specific archived daemon. both looked good. for other callsites looked really, really carefully.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5402
Differential Revision: https://secure.phabricator.com/D11042
Summary: Fixes T6790. Turn the old method into "new" (old signature) and "newEphemeral". Deploy "newEphemeral" as many places as possible; basically places we are not in the Differential application *and* have no intentions of ever saving the diff. These callsites are also all places we are just trying to get some changesets at the end of the day.
Test Plan: set differential application policy to 'administrators only'. viewed a commit in diffusion and it worked without any errors! i'm just using my thinkin' noodle on the other code paths.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6790
Differential Revision: https://secure.phabricator.com/D11020
Summary:
...except the transaction class itself, which still needs some knowledge of these transactions for older installs.
Ref T5245. T5604 and T5245 are now in a similar place -- there's an unknown set of bugs introduced from my changes and there's still old display code lying around with some old transactions in the database. I'll stomp out the bugs if / when they surface and data migration is up next.
This revision also adds a "TransactionPreviewString" method to the edge objects so that we can have a prettier "Bob edited associated projects." preview of this transaction.
Test Plan: added a project from task detail and saw correct preview throughout process with correct project added. bulk removed a project from some tasks. added a project from the edit details pane.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D11013
Summary:
Ref T5833. This allows Almanac ServiceTypes to define default properties for a service, which show up in the UI and are more easily editable.
Overall, this makes it much easier to make structured/usable/consistent service records: you can check a checkbox that says "prevent new allocations" instead of needing to know the meaning of a key.
Test Plan: {F251593}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5833
Differential Revision: https://secure.phabricator.com/D10996
Summary:
Ref T6742. Root cause of the issue:
- Daemon was running on a machine with a very long host name, which produced a lease name which was longer than 64 characters.
- MySQL wasn't set in STRICT_ALL_TABLES.
- The daemon would `UPDATE .. SET leaseOwner = <very long string>` to lock a task, and MySQL would silently truncate.
- The daemon would then try to select the locked task, but fail, because there's no matching lease owner.
To resolve this, use only the first 32 characters of the hostname. See IRC for more discussion.
Test Plan: Will confirm with reporter.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6742
Differential Revision: https://secure.phabricator.com/D10998
Summary: Fixes T6595. This diff has two issues as is... 1) the differential data fetching is pretty cheesey, but it looks like we can't just issue three separate databases to get the right data? 2) the translations break, since I am turning this into a string (and not an int) so the whole pluralization bit fails. I think 1 is okay as is and 2 needs to be fixed though I am not sure how to best do that...
Test Plan: loaded home page and it looked nice...!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6595
Differential Revision: https://secure.phabricator.com/D10979
Summary:
Fixes T6702. Ref T3554. Currently, tasks can be cancelled, retried and freed from the web UI by any logged in user.
This isn't appreciably dangerous (I can't come up with a way that a user could do anything security-affecting), but I think I probably intended this to be admin-only, but these actions should move to the CLI anyway.
Move them to the CLI. Lay some groundwork for some future `bin/worker cancel --class SomeTaskClass`, but don't implement that yet.
Test Plan: Used `cancel`, `retry` and `free` from the CLI. Hit all the error/success states.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6702
Differential Revision: https://secure.phabricator.com/D10939
Summary:
Fixes T6619. In `{Xnnn key=value, key=value}` we did not require a separator between the object and the key-value part. This could lead to `{rX11aaa}` being parsed as `{rX11 aaa}`, i.e. a reference to `rX11` with parameter `aaa` set.
Instead, require a space or comma before we'll parse key-value parts of embedded objects.
Test Plan:
Added and executed unit tests.
{F242002}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6619
Differential Revision: https://secure.phabricator.com/D10915
Summary: See <https://phabricator.wikimedia.org/T906>. This behavior is a bug; we should remove the button if the user can't use the application.
Test Plan:
- With Macro uninstalled, did these things verifying the button vanished:
- Sent a user a message.
- Edited a revision.
- Edited repository basic information.
- Edited an initiative.
- Edited a Harbormaster build step.
- Added task comments.
- Edited profile blurb.
- Edited blog description.
- Commented on Pholio mock.
- Uploaded Pholio image.
- Edited Phortune merchant.
- Edited Phriction document.
- Edited Ponder answer.
- Edited Ponder question.
- Edited Slowvote poll.
- Edited a comment.
- Reinstalled Macro and saw button come back.
- Used button to put silly text on a funny picture.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10900
Summary:
Ref T6615. Mixing ASC and DESC ordering on a multipart key makes it dramatically less effective (or perhaps totally ineffective).
Reverse the meaning of the `priority` column so it goes in the same direction as the `id` column (both ascending, lower values execute sooner).
Test Plan:
- Queued 1.2M tasks with `bin/worker flood`.
- Processed ~1 task/second with `bin/phd debug taskmaster` before patch.
- Applied patch, took ~5 seconds for ~1.2M rows.
- Processed ~100-200 tasks/second with `bin/phd debug taskmaster` after patch.
- "Next in Queue" query on daemon page dropped from 1.5s to <1ms.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aklapper, 20after4, epriestley
Maniphest Tasks: T6615
Differential Revision: https://secure.phabricator.com/D10895
Summary: Ref T6615. Ref T3554. We need better tooling around the queue eventually, so start here.
Test Plan: Added 100K+ tasks locally with `bin/worker flood`. Executed some of them with `bin/phd debug taskmaster` (we already have a TestWorker, used in unit tests).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3554, T6615
Differential Revision: https://secure.phabricator.com/D10894
Summary: Fixes T3189. Now if you say #projects in a commit message they will associate nicely with the commit. Also we record transactions about all this project editing fun.
Test Plan: tested migration by associating some projects with commits and verifying they still showed up post migration. tested adding / removing projects by doing so from the UI, noting transactions written nicely as well
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Projects: #projects
Maniphest Tasks: T3189
Differential Revision: https://secure.phabricator.com/D10877
Summary: Fixes T6152, T6237. This introduces a viewPolicy column to the DifferentialDiff, and re-jiggers the DifferentialDiff policy implementation such that things behave as before once associated with a revision, else use the DifferentialDiff policy column value.
Test Plan: made a diff with a non-standard view policy and noted that policy was still selected in the revision step. arc lint.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6237, T6152
Differential Revision: https://secure.phabricator.com/D10875
Summary: Ref T6343, adding HTMLMailMode to remarkup, and most objects should now be processed and appear pretty in emails.
Test Plan: Add a comment to a Maniphest task containing a mention of an object like '{T1}' or 'T1'. Emails should show a styled version of the object similar to how the object looks in the context of the Maniphest task in the UI.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, epriestley
Maniphest Tasks: T6343, T2617
Differential Revision: https://secure.phabricator.com/D10859
Summary:
Ref T6238. I'm building the instance management application now, but not putting it in the upstream -- I think the only use case for it is to build SAAS. If someone comes up with a use case (maybe a college course that wants to create an instance per-class or something?) we could open it up eventually, but it seems cleaner to keep it out of the upstream until we have such a use case.
I need to add schema patches. Make it easier for a subclass to just "add all the patches in this directory", like "autopatches/" works.
Test Plan:
- Ran `bin/storage status`, saw all normal patches still valid.
- In some future diff, the instances application will use this to apply patches.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6238
Differential Revision: https://secure.phabricator.com/D10848
Summary:
Fixes T6543. This was slightly trickier than I thought.
The actual inputs to this are: author, total affected count, added count, added list, removed count, removed list.
We weren't accounting for "total affected count" (used to select the correct word for "reviewers", e.g. "reviewers-few" vs "reviewers-many").
Test Plan: {F233357}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6543
Differential Revision: https://secure.phabricator.com/D10846
Summary:
Fixes T5492. I figured this would be easier to just fix than write a guide for; it actually took me an hour, but I spent like 75% of that futzing with my editor.
- The Move controller currently accepts either a slug or an ID. I can't find any callsites which pass a slug, and this doesn't make sense. Pretty sure this was copy/pasted from Edit or something. Only accept IDs.
- Slightly modernize the Move controller (newDialog(), handleRequest(), $viewer).
- When the user enters a bad slug, warn them that we're going to fix it for them and let them accept or reject the changes.
- Don't prefill the edit note (this feels inconsistent/unusual).
- On the form, label the input "Path" instead of "URI".
- Show the old path, to help remind the user what the input should look like.
- When a user tries to do a no-op move, show a more tailored message.
- When the user tries to do an overwriting move, explain how they can fix it.
- When normalizing a slug like `/question/???/mark/`, make it normalize to `/question/_/mark`.
Test Plan:
- Tried to move a document to itself.
- Tried to overwrite a document.
- Did a bad-path move, accepted corrected path.
- Did a good-path move.
- Did a path move with a weird component like `/???/`.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5492
Differential Revision: https://secure.phabricator.com/D10838
Summary:
Fixes T1191. I'll write up the changelog with notes about this and open a feedback task for followups.
When you run `storage upgrade`, automatically run `storage adjust` afterward. Provide a flag to disable this.
This brings everyone into the utf8mb4 world.
Test Plan: Ran `bin/storage upgrade` with various flags. Ran `bin/storage adjust`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10800
Summary:
Ref T1191. Use `storage quickstart` to regenerate `quickstart.sql` using modern schema construction statements.
This puts new installs into utf8mb4 mode immediately without requiring storage adjustment.
Test Plan:
- Ran `arc unit --everything`, which uses quickstart.
- Ran `bin/storage upgrade --namespace temp`, to quickstart a new namespace.
- Ran `bin/storage upgrade --namespace temp --disable-utf8mb4`, to quickstart a new namespace without utf8mb4 support.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10797
Summary:
Fixes T2792. This adds a pluggable configuration layer between all the stuff on disk (local/file) and the runtime configurable stuff (database).
An install can subclass this source and:
- For Phacility, query a remote service (like Almanac) to retrieve hostname-based configuration, allowing one install to serve multiple instances.
- Maybe for Phacility, query a remote service (like Phlux) to retrieve sitevar-like configuration (e.g., put everything in readonly mode to deal with a maintenance issue?). Not sure if we'll do this or not. We might just nuke Phlux since Almanac is sort-of-a-superset of it for our purposes.
- For third parties, query some other remote service if that makes config management easier. In particular, it would theoretically let you put locked config in Zookeeper or whatever else you want.
Test Plan: Added a fake source and saw it inject configuration.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2792
Differential Revision: https://secure.phabricator.com/D10787
Summary:
Ref T1191. Currently if a developer forgot to specify a column type, `storage adjust` aborts explosively mid-stream. Instead:
- Make this a formal error with an unambiugous name/description instead of something you sort of infer by seeing "<unknown>".
- Make this error prevent generation of adjustment warnings, so we don't try to `ALTER TABLE t CHANGE COLUMN c <unknown>`, which is nonsense.
- When schemata errors exist, surface them prominiently in `storage adjust`.
Overall:
- Once `storage upgrade` runs `storage adjust` automatically (soon), this will make it relatively difficult to miss these errors.
- Letting these errors slip through no longer escalates into a more severe issue.
Test Plan:
Commented out the recent `mailKey` spec and ran `storage adjust`:
```
$ ./bin/storage adjust --force
Verifying database schemata...
Found no adjustments for schemata.
Target Error
phabricator2_phriction.phriction_document.mailKey Column Has No Specification
SCHEMATA ERRORS
The schemata have serious errors (detailed above) which the adjustment
workflow can not fix.
If you are not developing Phabricator itself, report this issue to the
upstream.
If you are developing Phabricator, these errors usually indicate that your
schema specifications do not agree with the schemata your code actually
builds.
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10771
Summary:
Fixes an issue with T5336 / D9871. We did 99% of the work here but didn't actually turn on the priority sorting. The unit test passed by default, which didn't catch this.
- Fix the unit test (it failed).
- Fix the query (test now passes).
- Add a "Next in Queue" element to the UI to make this kind of thing easier to spot/understand.
Test Plan: Ran unit test. Viewed "Next in Queue". Queued some tasks, flushed the queue. Web UI tracked the state sensibly.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: cburroughs, epriestley
Differential Revision: https://secure.phabricator.com/D10766
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary:
Fixes T6416. The comment is consistent with intent, but the actual regexp doesn't quite work right. In particular, we incorrectly match `#security.` as `security.` (with a period) instead of `security` (with no period).
Since this stuff is a pain to test and I evidently got it wrong in this case in D8703, make it unit testable.
Test Plan:
Added unit tests. Also:
{F227181}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6416
Differential Revision: https://secure.phabricator.com/D10753
Summary: Fixes T6399. This allows you to use global search to find projects by searching for text in their descriptions.
Test Plan: Added a unique word to a project description, reindexed it, searched, got a hit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6399
Differential Revision: https://secure.phabricator.com/D10748
Summary: Ref T5702. This primarily gets URI routing out of Aphront and into an Application, for consistency.
Test Plan: Loaded some pages, got static resources.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10696
Summary:
Ref T2787.
- Account members can add and remove other members (major use case is corporate accounts).
- Use a modern edge constant setup.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10678
Summary: Fixes T6265, allows you to pass required:false as a parameter.
Test Plan: Add required:false to a field, no longer see "Required"
Reviewers: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6265
Differential Revision: https://secure.phabricator.com/D10659
Summary:
Ref T2787. These were still stuck in the stone ages.
(The handles are pretty skeletal but most aren't used anywehre.)
Test Plan: Funded an initiative without anything breaking. Grepped for removed constants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10647
Summary: without escapage here, creating databases fails. Fixes T6251.
Test Plan: ran the command CREATE DATABASE foo COLLATION binary and it failed; ran the command CREATE DATABASE foo2 COLLATION "binary" and it worked; trusting that the %T still works as advertised.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6251
Differential Revision: https://secure.phabricator.com/D10641
Summary:
Ref T2787. Phortune currently stores a bunch of stuff as `...inUSDCents`. This ends up being pretty cumbersome and I worry it will create a huge headache down the road (and possibly not that far off if we do Coinbase/Bitcoin soon). Even now, it's more of a pain than I figured it would be.
Instead:
- Provide an application-level serialization mechanism.
- Provide currency serialization.
- Store currency in an abstract way (currently, as "1.23 USD") that can handle currencies in the future.
- Change all `...inUSDCents` to `..asCurrency`.
- This generally simplifies all the application code.
- Also remove some columns which don't make sense or don't make sense anymore. Notably, `Product` is going to get more abstract and mostly be provided by applications.
Test Plan:
- Created a new product.
- Purchased a product.
- Backed an initiative.
- Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2787
Differential Revision: https://secure.phabricator.com/D10633
Summary: Ref T1191. We don't create new databases with appropriate collation yet.
Test Plan:
Created a new database and saw it issue:
```
>>> [10] <query> CREATE DATABASE IF NOT EXISTS `phabricator2_testo` COLLATE utf8mb4_bin
```
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10632
Summary:
Ref T4209. This creates storage for public keys against authorized hosts, such that servers can be authorized to make Conduit calls as the omnipotent user.
Servers are registered into this system by running the following command once:
```
bin/almanac register
```
NOTE: This doesn't implement authorization between servers, just the storage of public keys.
Placing this against Almanac seemed like the most sensible place, since I'm imagining in future that the `register` command will accept more information (like the hostname of the server so it can be found in the service directory).
Test Plan: Ran `bin/almanac register` and saw the host (and public key information) appear in the database.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D10400
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T6223. Two issues:
- We don't use `/u` mode on these regexps. Without `/u`, the `\w`/`\W`/`\s`/`\S` modifiers have bad behavior on non-ASCII bytes. Add the flag to use unicode mode, making `\w` and `\s` behave like we expect.
- We might possibly want to do something different here eventually (for example, if the `/u` flag has some huge performance penalty) but this seems OK for now.
- We use `\b` (word boundary) to terminate the match, but `🐳` is not a word character. Use `(?!\w)` instead ("don't match before a word character") which is what we mean.
Test Plan: {F211498}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6223
Differential Revision: https://secure.phabricator.com/D10618
Summary: Ref T1191. The bulk of the slowness in T1191 is copying tables. In some cases, we can't avoid this, but we have various readthrough caches which may be very large and are safe to drop, and dropping them is very quick (much less than 1 second). In particular, dropping the `changeset_parse_cache` made the process at least ~8 minutes faster on `secure.phabricator.com` (I killed it after 8 minutes, so I'm not sure what the real number is).
Test Plan: Ran `bin/storage adjust` and saw it drop caches before applying adjustments.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10616
Summary: Ref T1191. I renamed the phases but missed these two since I didn't have any more key issues locally.
Test Plan: Ran `bin/storage adjust` in production with key issues.
Reviewers: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10612
Summary:
Ref T1191. When changing the column type of an AUTO_INCREMENT column, we currently may lose the autoincrement attribute.
Instead, support it. This is a bit messy because AUTO_INCREMENT columns interact with PRIMARY KEY columns (tables may only have one AUTO_INCREMENT column, and it must be a primary key). We need to migrate in more phases to avoid this issue.
Introduce new `auto` and `auto64` types to represent autoincrement IDs.
Test Plan:
- Saw autoincrement show up correctly in web UI.
- Fixed an autoincrement issue on the XHProf storage table with `bin/storage adjust` safely.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10607
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. For most text columns, we either don't care if "a" and "A" are the same, or we expect them to be different (for example: keys, domains, secrets, etc). Default text columns to the `_bin` collation so they are compared by strict character value. This is safer in cases where we aren't sure.
For some text columns, we allow the user to sort by the column in the UI (like Maniphest task titles) or we do care that "A" and "a" are the same (for example: project names). Introduce a new class of virtual data types, the "sort..." types, to cover these columns. These are like the "text..." types but use sorting collations which treat "A" and "a" the same.
Test Plan:
- Made an effort to identify all columns where the UI relies on database collation.
- Ran `bin/storage adjust` and cleared all warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: beng, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10602
Summary:
Ref T1191. These are a bit tricky because keys can interact with column changes, so basically we do three phases:
1. Nuke all bad keys.
2. Make all column (and database/table) changes.
3. Fix all nuked keys.
Test Plan: Ran migration locally. See note for remaining issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10599
Summary:
Ref T1191. Adds a new workflow which can apply schema adjustments.
For now, it only performs database and table collation/charset adjustments. I believe these are extremely safe/minor, because they only affect the default values for newly created columns.
Test Plan:
- Ran migration on various database states, database/table changes went through cleanly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10595
Summary:
Ref T1191. Ref T6203. While generating expected schemata, I ran into these columns which seem to have sketchy nullability.
- Mark most of them for later resolution (T6203). They work fine today and don't need to block T1191. Changing them can break the application, so we can't autofix them.
- Forgive a couple of them that are sort-of reasonable or going to get wiped out.
Test Plan: Saw 94 remaining warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T1191, T6203
Differential Revision: https://secure.phabricator.com/D10593
Summary:
Ref T1191. Nothing too notable here:
- Allow a Lisk object to specify that there's no expectation that a table exists. We have one Harbormaster object and one Token object like this.
- Removed BuildPlanTransactionComment because it's currently unused.
Test Plan:
- Saw ~200 fewer warnings; just ~800 left.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10583
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary: See <https://github.com/phacility/phabricator/issues/665>. From reading documentation, this seems dramatically better for InnoDB tables than the default behavior.
Test Plan: Ran `bin/storage dump`, got a reasonable-looking dump.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10606
Summary: Ref T1191. Handful of minor things here (T6150, T6149, T6148, T6147, T6146) but nothing very noteworthy.
Test Plan: Viewed web UI, saw fewer errors.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10527
Summary: Fixes T6177. Now that we've reframed "Beta" into "Prototype", there's no reason this needs to be in a separate super-hidden class of application anymore.
Test Plan: Saw Releeph available as a normal Prototype application.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6177
Differential Revision: https://secure.phabricator.com/D10550
Summary: Fixes T5374. Add an acceptance test to the `PhabricatorInfrastructureTestCase` class which fails if a Celerity map is not up-to-date. In order to achieve this, a lot of code used to generate Celerity maps was transferred from `CelerityManagementMapWorkflow` to `CelerityResourceMap` and `CelerityResourceMapGenerator`.
Test Plan: Ran `arc unit` and noticed that all tests passed. Modified a JavaScript file and ran `arc unit` again (without running `./bin/celerity map`)... this time the test failed, as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5374
Differential Revision: https://secure.phabricator.com/D9817
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191. Three parts:
- The old way of getting key information only got primary / unique / foreign keys, not all keys. Use `SHOW INDEXES` to get all keys instead.
- Track key uniqueness and raise warnings about it.
- Add a new "all issues" view to show an expanded, flat view of all issues. This is just an easier way to get a list so you don't have to dig around in the hierarchical view.
Test Plan:
{F206351}
{F206352}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10525
Summary: T1191. Nothing very notable here.
Test Plan: Saw more blue in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10522
Summary: Ref T1191. Nothing too exciting in these.
Test Plan: Saw more blue in UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10521
Summary:
Ref T1191. Notable:
- Allowed objects to remove default columns (some feed tables have no `id`).
- Added a "note" severity and moved all the charset stuff down to that to make progress more clear.
Test Plan:
Trying to make the whole thing blue...
{F205970}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10519
Summary: Ref T1191. Fills in some more of the databases. Nothing very notable here. I didn't encounter any issues or overlong keys.
Test Plan: Used web UI to click around and verify expected schemata match up against actual schemata well.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10516
Summary: Ref T1191. This fills in some more features and gets audit and auth nearly generating reasonable expected schemata.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10500
Summary:
Ref T1191. This lays some groundwork for generating the expected schemata, so we can compare them to the actual schemata and produce a meaningful diff.
- In general, each application will subclass `PhabricatorConfigSchemaSpec` and provide a definition of the tables it expects.
- This class has helper methods to mostly-automatically build table definitions for Lisk and (in the future) edges.
- When building expected schema, we specify a "data type", like "epoch". This is the type of data the application stores in the column, from the application's point of view. The SchemaSpec converts this into the best avilable storage type: for example, "text" will translate to `utf8mb4` if it's availalbe, or `binary` if not. This gives us a layer of indirection to insulate us from craziness.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10497
Summary:
Ref T1191. Plan here is:
- Build a tool showing the current schemata status (this diff).
- Have it compare the current status to the desired status (partly here, mostly in future diffs).
- Then add a migration tool, and eventually a setup issue to tell people to run it.
Test Plan:
Reviewed current schemata.
{F204492}
{F204493}
{F204494}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10494
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Ref T5835. This is all pretty boilerplate, and does not interact with Phortune at all yet.
You can create "Initiatives", which have a title and description, and support most of the expected infrastructure (policies, transactions, mentions, edges, appsearch, remakrup, etc).
Only notable decisions:
- Initiatives have an explicit owner. I think it's good to have a single clearly-responsible user behind an initiative.
- I think that's it?
Test Plan:
- Created an initiative.
- Edited an initiative.
- Changed application policy defaults.
- Searched for initiatives.
- Subscribed to an initiative.
- Opened/closed an initiative.
- Used `I123` and `{I123}` in remarkup.
- Destroyed an initiative.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5835
Differential Revision: https://secure.phabricator.com/D10481
Summary: see title. Ref T5875.
Test Plan: Merged one task into another task - verified transactions on both tasks. Merged two tasks into another task - verified transactions on all three tasks. Checked out my feed and saw MERGE_INTO stories and MERGE_FROM stories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5875
Differential Revision: https://secure.phabricator.com/D10427
Summary: Shows the UI everywhere. Also asort() the keys before calculating the environment hash as that is probably an issue for someone at some point we just don't need to have. Ref T5968.
Test Plan: Viewed the setup check and saw a link to the daemon console. Viewed the daemon console and saw the various stale config daemons. Clicked a daemon and saw a "stale config" header icon where expected. Restarted daemons and all of this went away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5968
Differential Revision: https://secure.phabricator.com/D10367
Summary:
Fixes T4057. This sort of sidesteps the trickiest (but very rare) case of things like embedded slowvotes. We might be able to refine that later.
In the common bad case (macros, large images) it gets reasonable results by using `overflow: hidden` with `max-height`.
We use `PhabriatorMarkupEngine::summarize()` to try to just render the first paragraph.
Test Plan: {F195093}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4057
Differential Revision: https://secure.phabricator.com/D10355
Summary: Fixes T4769. This is silly and just scratches an itch, but do a better job with navigation sequences.
Test Plan: {F195082}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4769
Differential Revision: https://secure.phabricator.com/D10353
Summary: Fixes T2605. Provide some instructions on configuring RDS properly. The "DB Parameter Group" thing in the web UI seems pretty easy to use, it's just not obvious that it's what you should be using.
Test Plan: Jiggled these warnings to trigger them, viewed the output, saw a table of values and a hint about RDS.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10343
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Fixes T5916. Key insight here is that the screenshot shows a custom "Detail Solution / Notes" field, which is why this mojo doesn't work: custom remarkup fields don't emit their content for mention/file extraction.
Also fix a bug where multiple blocks with file PHIDs could be merged improperly, discarding some file PHIDs.
Test Plan: Added a custom remarkup field, added files to it, saw them attach to the task when changes were saved.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5916
Differential Revision: https://secure.phabricator.com/D10335
Summary:
Fixes T5934. If you hash a password with, e.g., bcrypt, and then lose the bcrypt hasher for some reason, we currently fatal when trying to figure out if we can upgrade.
Instead, detect that the current hasher implementation has vanished and let the user reset their password (for account passwords) or choose a new one (for VCS passwords)>
Test Plan:
Account password:
- Artifically disabled bcrypt hasher.
- Viewed password panel, saw warnings about missing hasher.
- Used password reset workflow to change password, saw iterated MD5 hashed password get set.
- Enabled bcrypt hasher again.
- Saw upgrade warning.
- Upgraded password to bcrypt.
VCS password:
- Artificially disabled bcrypt hasher.
- Viewed password panel, saw warnings about missing hasher.
- Reset password.
- Saw iterated md5 password.
- Reenabled bcrypt.
- Upgraded to bcrypt.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5934
Differential Revision: https://secure.phabricator.com/D10325
Summary:
Via HackerOne. Chrome (at least) interprets backslashes like forward slashes, so a redirect to "/\evil.com" is the same as a redirect to "//evil.com".
- Reject local URIs with backslashes (we never generate these).
- Fully-qualify all "Location:" redirects.
- Require external redirects to be marked explicitly.
Test Plan:
- Expanded existing test coverage.
- Verified that neither Diffusion nor Phriction can generate URIs with backslashes (they are escaped in Diffusion, and removed by slugging in Phriction).
- Logged in with Facebook (OAuth2 submits a form to the external site, and isn't affected) and Twitter (OAuth1 redirects, and is affected).
- Went through some local redirects (login, save-an-object).
- Verified file still work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10291
Summary:
Ref T5885. See D10276.
Currently, ActionHeaders can only have minicons, and we don't use them anywhere and they probably don't make much sense in the product anymore.
Instead, allow them to have font icons. Remove minicons, which have no callsites and probably won't in the future.
Test Plan:
{F190925}
- Grepped for `minicons`.
- Grepped for `setHeaderIcon()`.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5885
Differential Revision: https://secure.phabricator.com/D10277
Summary: Fixes T5884. Macro images are no longer public on most installs. We could generate tokens for them, but this (using Conduit to pull the file data) is easier and more correct.
Test Plan: Logged a bot into IRC and had it spam part of a macro before being killed for flooding.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5884
Differential Revision: https://secure.phabricator.com/D10274
Summary: Fixes T5453.
Test Plan: made a remarkup comment that "Q1 is dumb and Q10 is awesome" and only Q10 was linked. changed the new setting to have the value " " and the Q1 also started linking.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5453
Differential Revision: https://secure.phabricator.com/D10270
Summary: Fixes T5883. The first time we hit an error we'll continue forward; we only bail after the second time. Instead, check for an error immediately
Test Plan: HA HA HA DID NOT TEST HA HA HA HA
Reviewers: btrahan, cburroughs
Reviewed By: cburroughs
Subscribers: epriestley
Maniphest Tasks: T5883
Differential Revision: https://secure.phabricator.com/D10265
Summary: Fixes T3173. This doesn't actually fix T3173 but I'm going to redirect that. It does make the bot quit IRC gracefully, with a nicer quit message, which can be customized.
Test Plan: Got a bot to quit IRC with nice messages.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3173
Differential Revision: https://secure.phabricator.com/D10257
Summary: Fixes T2101. When viewing an image change, show image dimensions, MIME type, and filesize.
Test Plan:
{F190189}
{F190190}
very utility
such wow
Reviewers: mailson, btrahan, chad
Reviewed By: chad
Subscribers: epriestley, Korvin, aran
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D5206
Summary:
Fixes T5855. Adds a `--graceful N` flag to `phd stop` and `phd restart`.
`phd` will send SIGINT, wait `N` seconds, SIGTERM, wait 15 seconds, and SIGKILL. By default, `N` is 15.
Test Plan:
- Ran `bin/phd debug ...` and used `^C` to interrupt daemons. Saw graceful shutdown behavior, and abrupt termination on multiple `^C`.
- Ran `bin/phd start`, `bin/phd stop` and `bin/phd restart` with `--graceful` set to various things, notably `0`. Saw graceful shutdowns on the CLI and in the web UI. With `0`, abrupt shutdowns.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5855
Differential Revision: https://secure.phabricator.com/D10228
Summary:
Fixes T5837. The problem is that the hash is being recognized as a commit hash. We currently fire the object monogram rules fairly early, but there's no real reason to do this. Move them after all of the hyperlink rules:
0 PhutilRemarkupEscapeRemarkupRule
100 PhutilRemarkupMonospaceRule
150 PhutilRemarkupDocumentLinkRule
175 PhrictionRemarkupRule
<<< OLD OBJECT RULE POSITION
200 PhabricatorIconRemarkupRule
200 PhabricatorMemeRemarkupRule
200 DivinerSymbolRemarkupRule
350 DoorkeeperRemarkupRuleJIRA
350 PhabricatorYoutubeRemarkupRule
350 DoorkeeperRemarkupRuleAsana
400 PhutilRemarkupHyperlinkRule
>>> NEW OBJECT RULE POSITION
500 PhabricatorImageMacroRemarkupRule
500 CustomInlineJIRA5Rule
500 PhabricatorMentionRemarkupRule
500 CustomInlineCodeRule
1000 PhutilRemarkupDelRule
1000 PhutilRemarkupBoldRule
1000 PhutilRemarkupItalicRule
1000 PhutilRemarkupUnderlineRule
- The disadvantage of this approach is that `{F123, alt=go look at http://lol.com/ omg}` will parse the URL first, and then fail to resolve the object embed. This seems very rare / unusual.
- The advantage is that all URLs which happen to have monograms in them work.
In the future, we could refine this by separating the rules, so the embed (`{...}`) versions fired at priority 200, while the normal versions fired at priority 450. We can wait for use cases, though. This is a little messy because the same code implements both rules.
Test Plan:
- Verified example in T5837.
- Marked up object rules like `F123` (works), `[[ asdf | F123 ]]` (works), `{F123, alt=http://example.com}` (does not work).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5837
Differential Revision: https://secure.phabricator.com/D10212
Summary:
See some discussion here:
24a6eeb8d8 (commitcomment-7334892)
The `protected $properties;` storage parameter added to `ProjectColumn` is shadowed by `getProperties()` in the base class.
Although this works correctly for me, it's ambiguous and worth fixing. Make the base class methods explicit.
Test Plan: Used `grep` to find callers for both methods and renamed them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10210
Summary: Just wanted to play with this, removes the gradient 'cards' for a flat design.
Test Plan:
Tested various apps, workboards
{F166127}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9515
Summary:
Currently, we'll try to publish notifications while running tests. This is at best unnecessary and at worst problematic (we don't stub out the server).
For now, just never publish them.
Test Plan: Ran unit tests with notifications enabled but the server down and didn't get a bunch of warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10171
Summary:
Fixes T5476. Using edges to store which objects are on which board columns ends up being pretty awkward. In particular, it makes T4807 very difficult to implement.
Introduce a dedicated `BoardColumnPosition` storage.
This doesn't affect ordering rules (T4807) yet: boards are still arranged by priority. We just read which tasks are on which columns out of a new table.
Test Plan:
- Migrated data, then viewed some boards. Saw exactly the same data.
- Dragged tasks from column to column.
- Created a task directly into a column.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5476
Differential Revision: https://secure.phabricator.com/D10160
Summary:
Restores functionality for Flowdock->Chatbot adapter.
Most likely the result of API changes in the year since the original patch was contributed,
the flowdock adapter no longer worked.
This makes a few tweaks to both the base streaming adapter class and the flowdock adpater. I took care to not disturb the functionality of the campfire adapter, but I don't have any way to test it.
Test Plan: I am new here and I have no idea what to write other than sarcastic things but I'll most like amend this after review.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10168
Summary:
Ref T4589. When you look at a file, we load attached objects in order to run the "you can see this if you can see any attached object" policy check.
However, right now the subquery inherits the "throw on filter" flag from the parent query. This inheritance makes sense in other cases[1], but because this is an "ANY" rule it does not make sense here. In practice, it means that if the file is attached to several objects, and any of them gets filtered, you can not see the file.
Instead, explicitly drop the flag for this subquery.
[1] Sort of. It doesn't produce wrong results in other cases, but now that I think about it might produce a less-tailored error than it could. I'll look into this the next time I'm poking around.
Test Plan:
- Viewed an "All Users" file attached to a private Mock.
- Prior to this patch, I incorrectly received an exception when the Mock was loaded. This is wrong; I should be able to see the file because the policy is "All Users".
- After the patch, I can correctly view the file, just not the associated mock.
{F127074}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: 20after4, aran, epriestley
Maniphest Tasks: T4589
Differential Revision: https://secure.phabricator.com/D8498
Summary: Ref T4659. Because we JOIN, tasks with no value are filtered out. Instead, LEFT JOIN.
Test Plan: Issued an "Order by" and got all applicable tasks. Adjusted values and saw order change.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T4659
Differential Revision: https://secure.phabricator.com/D10119
Summary:
Resolves T4659. This implements support for sorting tasks by custom fields.
Some of this feels hacky in the way it's hooked up to the Maniphest search engine and task query.
Test Plan: Queryed on a custom date field, with a small page size, and moved back and forth through the result set.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4659
Differential Revision: https://secure.phabricator.com/D10106
Summary: Initially the change is aimed to solve issue with line breaks being lost in projects descriptions. But it is done in a general place so line breaks behavior is more consistent all over the place.
Test Plan:
- Write a multiline description of the project, using single \n for line breakers.
- View project details in project/view/X?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10014
Summary: Fixes T5102. Bumps the version to clear caches and documents the `#` headers.
Test Plan: Read documentation.
Reviewers: asherkin, btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5102
Differential Revision: https://secure.phabricator.com/D10046
Summary:
Ref T4420. This was a performance hack introduced long ago to make typeaheads for users a little cheaper. The idea was that you could load some of an object's columns and skip other ones.
We now always load users on demand, so the cost of loading the whole objects is very small. No other use cases ever arose for this, and it seems unlikely that they will in the future. Remove it all.
Test Plan:
- Grepped for `CONFIG_PARTIAL_OBJECTS`.
- Grepped for `dirtyFields`.
- Grepped for `missingFields`.
- Grepped for `resetDirtyFields`.
- Grepped for `loadColumns`.
- Grepped for `loadColumnsWhere`.
- Grepped for `loadRawDataWhere`.
- Loaded and saved some lisk objects.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9895
Summary: Ref T5245. Earlier changes in this stack introduced new edge strings, provide English translations.
Test Plan: This is hard to test exhastively, but I poked around the UI and saw some of these rendering correctly. If I messed anything up it's trivial to fix when someone spots it.
Reviewers: joshuaspence, chad
Reviewed By: joshuaspence, chad
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9920
Summary: Ref T5245. Updates the project/object edge to use a modern class definition. Moves further toward real edges.
Test Plan: Added projects to some objects, viewed transactions in transaction record.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9849
Summary: Ref T5245. With work elsewhere (notably, D9839) we can remove this TODO and use real transactions.
Test Plan: Pushed a `closes Txxx` commit and got a close + transaction.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9848
Summary:
Ref T5245. These were a bad idea.
We no longer need actors for edge edits either, so remove those. Generally, edges have fit into the policy model as pure/low-level infrastructure, and they do not have any policy or capability information in and of themselves.
Test Plan: `grep`
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9840
Summary:
Ref T5245. See some discussion in D9838.
When we attach object A to object B, we'd like to write transactions on both sides but only write the actual edges once.
To do this, allow edge types to `shouldWriteInverseTransactions()`. When an edge type opts into this, have editors apply the inverse transactions before writing the edge. These inverse transactions don't actually apply effects, they just show up in the transaction log.
Test Plan: Attached and detached revisions from tasks, saw transactions appear on both sides of the operation.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: btrahan, joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9839
Summary:
Ref T5245. A very long time ago I had this terrible idea that we'd let objects react to edges being added and insert transactions in response.
This turned out to be a clearly bad idea very quickly, for like 15 different reasons. A big issue is that it inverts the responsibilities of editors. It's also just clumsy and messy.
We now have `PhabricatorApplicationTransactionInterface` instead, which mostly provides a cleaner way to deal with this.
Implement `PhabricatorApplicationTransactionInterface`, implicitly moving all the attach actions (task/task, task/revision, task/commit, task/mock) to proper edge transactions.
The cost of this is that the inverse edges don't write transactions -- if you attach an object to another object, only the object you were acting on posts a transaction record. This is sort of buggy anyway already. I'll fix this in the next diff.
Test Plan: Attached tasks, revisions and mocks to a task, then detached them.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9838
Summary:
Ref T5245. I want to add a new capability to edge types, which is a good opportunity to move away from `PhabricatorEdgeConfig`, which isn't modular.
This is basically the same as the modularization of PHID types, which has worked well. Add `PhabricatorEdgeType` and provide an adaption layer for the existing code.
This has no runtime changes, except the fixed edge constant.
Test Plan: Ran `var_dump(PhabricatorEdgeType::getAllTypes())` and got reasonable looking output.
Reviewers: chad, btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T5245
Differential Revision: https://secure.phabricator.com/D9837
Summary: Add a new line for clarity.
Test Plan: Inspected `./resources/celerity/map.php`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9931
Summary: `phutil_var_export` only accepts a single parameter. This bug was introduced in D9926.
Test Plan: Eye-ball it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9930
Summary: Fixes T5336. Currently, `PhabricatorWorkerLeaseQuery` is basically FIFO. It makes more sense for the queue to be a priority-queue, and to assign higher priorities to alerts (email and SMS).
Test Plan: Created dummy tasks in the queue (with different priorities). Verified that the priority field was set correctly in the DB and that the priority was shown on the `/daemon/` page. Started a `PhabricatorTaskmasterDaemon` and verified that the higher priority tasks were executed before lower priority tasks.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5336
Differential Revision: https://secure.phabricator.com/D9871
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: The monospaced rule should still have higher precedence than these
rules, so use flat text tests to cover some rule interactions.
Auditors: btrahan
Summary: Remarkup rules can not safely use arbitrary text in tag attributes,
because it may include tokens which are later replaced. Precedence rules
should prevent this in general. Use flat text assertions and adjust precedence
rules in cases where they may not prevent tokens from appearing in attributes.
Auditors: btrahan
Summary:
Ref T3116. Add a Herald action "Require legal signatures" which requires revision authors to accept legal agreements before their revisions can be accepted.
- Herald will check which documents the author has signed, and trigger a "you have to sign X, Y, Z" for other documents.
- If the author has already signed everything, we don't spam the revision -- basically, this only triggers when signatures are missing.
- The UI will show which documents must be signed and warn that the revision can't be accepted until they're completed.
- Users aren't allowed to "Accept" the revision until documents are cleared.
Fixes T1157. The original install making the request (Hive) no longer uses Phabricator, and this satisfies our requirements.
Test Plan:
- Added a Herald rule.
- Created a revision, saw the rule trigger.
- Viewed as author and non-author, saw field UI (generic for non-author, specific for author), transaction UI, and accept-warning UI.
- Tried to accept revision.
- Signed document, saw UI update. Note that signatures don't currently //push// an update to the revision, but could eventually (like blocking tasks work).
- Accepted revision.
- Created another revision, saw rules not add the document (since it's already signed, this is the "no spam" case).
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: asherkin, epriestley
Maniphest Tasks: T1157, T3116
Differential Revision: https://secure.phabricator.com/D9771
Summary:
Ref T3116. Allow documents to be queried for ones the viewer has signed, and make this the default view.
This also relaxes the versioning stuff a little bit, and stops invalidating signatures on older versions of documents. While I think we should do that eventually, it should be more explicit and have better coordination in the UI. For now, we'll track and show older signatures, but not invalidate them.
I imagine eventually differentiating between "minor edits" (typo / link fixes, for example) and major edits which actually require re-signature.
Test Plan: {F171650}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D9769
Summary: Lightens up the border a little on obj tags
Test Plan: photoshop, homepage
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9759
Summary: Fixes T5497. Scope these down a little bit so they don't bleed into `{W...}` embeds and such.
Test Plan:
- Viewed a Legalpad document with headers, monospaced stuff, and lists. Looked the same before/after.
- Viewed a comment with headers, monospace, and lists. Looked the same before/after.
- Viewed a `{W..}` embed, now looks sane.
{F171052}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5497
Differential Revision: https://secure.phabricator.com/D9757
Summary: The rest of this code works if we hand off `array()`, and fataling here, while more correct, is harder for users to get out of (they have to go manually remove files) and not obvious.
Test Plan: Corrupted pid file and ran `phd stop`.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9749
Summary: Provides a base set of shaded object tags for use in Phabricator.
Test Plan:
Lots of Photoshop and Chrome.
{F170252, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9737
Summary: Moves PhabricatorActionHeaderView to PHUIActionHeaderView, adds Red, Green, and Violet colors and extend ObjectBox to take colors and action headers.
Test Plan:
Tested new Welcome layout as well as UIExamples, Workboards, and Hovercards
{F169669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9707
Summary: Constructing tables manually just isn't fun.
Test Plan:
```
./bin/storage status
phabricator:db.audit Applied db audit
phabricator:db.calendar Applied db calendar
phabricator:db.chatlog Applied db chatlog
phabricator:db.conduit Applied db conduit
phabricator:db.countdown Applied db countdown
phabricator:db.daemon Applied db daemon
phabricator:db.differential Applied db differential
phabricator:db.draft Applied db draft
phabricator:db.drydock Applied db drydock
phabricator:db.feed Applied db feed
phabricator:db.file Applied db file
phabricator:db.flag Applied db flag
phabricator:db.harbormaster Applied db harbormaster
...
```
This probably isn't ready to land yet, we should fix `PhutilConsoleTable` to truncate columns which would otherwise cause overflow.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9604
Summary: Ref T5179. Ref T4045. Ref T832. We can now write non-utf8 hunks into the database, so try to do more reasonable things with them in the UI.
Test Plan: (See screenshots...)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T832, T4045, T5179
Differential Revision: https://secure.phabricator.com/D9294
Summary: Convert `./bin/mail` and a`./bin/sms` to use `PhutilConsoleTable` for formatting output.
Test Plan: I don't actually have mail and SMS setup on my dev box, but this is a pretty straightforward change.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9621
Summary:
Ref T4209. Unifies the local (`./bin/phd status`) and global (`./bin/phd status --all`) view into a single table. This generally makes it easy to administer daemons running across multiple hosts.
Depends on D9606.
Test Plan:
```
> sudo ./bin/phd status
ID Host PID Started Daemon Arguments
38 localhost 2282 Jun 18 2014, 7:52:56 AM PhabricatorRepositoryPullLocalDaemon
39 localhost 2289 Jun 18 2014, 7:52:57 AM PhabricatorGarbageCollectorDaemon
40 localhost 2294 Jun 18 2014, 7:52:57 AM PhabricatorTaskmasterDaemon
41 localhost 2314 Jun 18 2014, 7:52:58 AM PhabricatorTaskmasterDaemon
42 localhost 2319 Jun 18 2014, 7:52:59 AM PhabricatorTaskmasterDaemon
43 localhost 2328 Jun 18 2014, 7:53:00 AM PhabricatorTaskmasterDaemon
44 localhost 2354 Jun 18 2014, 7:53:08 AM PhabricatorRepositoryPullLocalDaemon X --not Y
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9607
Summary: Ref T4209. Currently, `./bin/phd status` prints a table showing the daemons that are executing on the current host. It would be useful to be able to conventiently query the daemons running across all hosts. This would also (theoretically) make it possible to conditionally start daemons on a host depending upon the current state and on the daemons running on other hosts.
Test Plan:
```
> ./bin/phd status --all
ID Host PID Started Daemon Arguments
18 phabricator 6969 Jun 12 2014, 4:44:22 PM PhabricatorTaskmasterDaemon
17 phabricator 6961 Jun 12 2014, 4:44:19 PM PhabricatorTaskmasterDaemon
16 phabricator 6955 Jun 12 2014, 4:44:15 PM PhabricatorTaskmasterDaemon
15 phabricator 6950 Jun 12 2014, 4:44:14 PM PhabricatorTaskmasterDaemon
14 phabricator 6936 Jun 12 2014, 4:44:13 PM PhabricatorGarbageCollectorDaemon
13 phabricator 6931 Jun 12 2014, 4:44:12 PM PhabricatorRepositoryPullLocalDaemon
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9497
Summary:
Full screen is a little foobar so disabling it for inline comments
Fixes T5272
Test Plan:
View inline comment after change, make sure full screen option
has gone.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5272
Differential Revision: https://secure.phabricator.com/D9579
Summary:
Ref T4986. Instead of requiring you to know engine class names and copy/paste URLs, provide select dropdowns that use SCARY JAVASCRIPT to do magical things.
I think this is mostly reasonable, the only issue is that it's hard to create a panel out of a completely ad-hoc query (you'd have to save it, then create a panel out of the saved query, then remove the saved query). Once we develop T5307 we can do a better job of this.
Test Plan: See screenshots.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9572
Summary: Fixes T4729. This form is a little fluff, but we show it in the URI when you click an anchor on the page, and doing so seems desirable. I think it's reasonable to support this form, given that it appears in the URI.
Test Plan: Wrote some stuff like `M60`, `M60/71`, `M60/72/`, `M60/73/#13` and saw it all get picked up and rendered/linked properly.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4729
Differential Revision: https://secure.phabricator.com/D9555
Summary: Sometimes, the `PhabricatorInfrastructureTestCase` //would// fail, but we don't run it with `arc unit` because of the directory structure. See D9556 for an example.
Test Plan: This is essentially the same as D9557.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9559
Summary:
Ref T5359. When users upload non-image file types (PDFs, text files, whatever), Pholio currently chokes in a few places. Make most of these behaviors more reasonable:
- Provide thumbs in the required sizes.
- Predict the thumb size of these files correctly.
- Disable inline comments.
- Make "View Fullsize" and "Download" into buttons. These mostly-work. Download should probaly really download, but CSRF on forms is a bit of a pain right now.
Test Plan: See screenshots.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5359
Differential Revision: https://secure.phabricator.com/D9548
Summary: This ensure that Aphlict is always served on the primary / production domain, because the alternate file domain is intended to prevent Flash execution.
Test Plan: Confirmed this fixes the issue by visiting https://code.redpointsoftware.com.au/ and seeing notification messages.
Reviewers: joshuaspence, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9511
Summary: This class has been deprecated for a while now (see rP0a8b0d1392bd79b4e88fbf910b176c960d57b4b4). It should be safe to remove.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9467
Summary: This class has been deprecated for a while now (see rPdad7c65bf56384480be7c18e02fdc01ea67cf1ff). It should be safe to remove.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9468
Summary: This class has been deprecated for a while (see rP574bc3ba31cca2767bafe7844d7f854d90d6be1c). It should be safe to remove now.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9469
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
This currently uses a hard-coded relative path, but should not, especially after D9401.
The major effect of this is that updated .swf files might not be served properly, and we were at the whims of the server configuration for caching/versioning behavior.
Test Plan: Enabled debug notifications, saw .swf load through Celerity.
Reviewers: joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9421
Summary:
Replaces the icons with fonts from FontAwesome. Up in the air about the meme icon. Thoughts?
Also removed the second fullscreen/normal state. Seems obvious what it does, but assume someone complained previously?
Test Plan:
Tested all the icon states and made sure they still worked. Test fullscreen and help.
{F163485}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9385
Summary: Ref T2628. This makes Transactions understand objects that can have project relationships, extract project mentions, and handle watching.
Test Plan: See next diff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2628
Differential Revision: https://secure.phabricator.com/D9340
