Summary:
Ref T11954. In cluster configurations, we get repository information by making HTTP calls over Conduit.
These are slower than local calls, so clustering imposes a performance penalty. However, we can use futures and parallelize them so that clustering actually improves overall performance.
When not running in clustered mode, this just makes us run stuff inline.
Test Plan:
- Browsed Git, Mercurial and Subversion repositories.
- Locally, saw a 700ms wall time page drop to 200ms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17009
Summary:
Fixes T11960. In D16998 I removed some code which validated settings on read to improve performance, but lost this replacement validation in shuffling the patch stack.
This restores similar validation before we write the cache. This has the same effect, it's just faster.
Also, bump the cache key to wipe out anything that got bitten (like my account on `secure` rendering dates wrong).
Test Plan:
- Edited settings, verified the edits held.
- Faked invalid settings, saw the check throw exceptions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11960
Differential Revision: https://secure.phabricator.com/D17008
Summary:
Ref T11954. This reduces how much work we need to do to load settings, particularly for Conduit (which currently can not benefit directly from the user cache, because it loads the user indirectly via a token).
Specifically:
- Cache builtin defaults in the runtime cache. This means Phabricator may need to be restarted if you change a global setting default, but this is exceptionally rare.
- Cache global defaults in the mutable cache. This means we do less work to load them.
- Avoid loading settings classes if we don't have to.
- If we missed the user cache for settings, try to read it from the cache table before we actually go regenerate it (we miss on Conduit pathways).
Test Plan: Used `ab -n100 ...` to observe a ~6-10ms performance improvement for `user.whoami`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D16998
Summary:
Ref T11939. IPv4 addresses can normally only be written in one way, but IPv6 addresses have several formats.
For example, the addresses "FFF::", "FfF::", "fff::", "0ffF::", "0fFf:0::", and "0FfF:0:0:0:0:0:0:0" are all the same address.
Normalize all addresses before writing them to logs, etc, so we store the most-preferred form ("fff::", above).
Test Plan:
Ran an SSH clone over IPv6:
```
$ git fetch ssh://local@::1/diffusion/26/locktopia.git
```
It worked; verified that address read out of `SSH_CLIENT` sensibly.
Faked my remote address as a non-preferred-form IPv6 address using `preamble.php`.
Failed to login, verified that the preferred-form version of the address appeared in the user activity log.
Made IPv6 requests over HTTP:
```
$ curl -H "Host: local.phacility.com" "http://[::1]/"
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11939
Differential Revision: https://secure.phabricator.com/D16987
Summary:
Fixes T11894. Currently, if you aren't attending any events for a while, we can cache that you are free for the next 72 hours, even if you have an event in a few hours.
Instead, only cache "user is free" until the next event, if one exists.
Test Plan: Dumped cache TTLs, saw 52 minutes instead of ~4300 minutes with a near-upcoming event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11894
Differential Revision: https://secure.phabricator.com/D16937
Summary: Fixes T11917. Give logged-out / omnipotent users the global settings, not the default settings.
Test Plan: Changed applications and language, logged out, saw changes as a public user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11917
Differential Revision: https://secure.phabricator.com/D16936
Summary: Ref T11816. This could be a little cleaner, but we currently have two copies of the logic. Get them using the same code. Once that's actually working I can go make the code a little prettier.
Test Plan: Viewed Calendar month view tooltips, saw the same values as subheaders.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16880
Summary:
Fixes T11809. Ref
- Explicitly document the summary icon hints -- I don't think these are too hard to figure out (and maybe this stuff should just go in the tooltips) but we can start here.
- Use color + shape to distinguish between "cancelled" and "declined", not just color (for users with vision accessibility issues).
- Translate a "minute(s)" string into sensible English.
- Use RSVP status on the month view green circle thing.
Test Plan:
- Read docs.
- Looked at month view.
- Read reminder mail.
- Viewed month view mobile view.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16872
Summary:
Ref T9304. This adds a "GuidanceEngine" which can generate "Guidance".
In practice, this lets third-party code (rSERVICES) remove and replace instructions in the UI, which is basically only usefulf or us to tell users to go read the documentation in the Phacility cluster.
The next diff tailors the help on the "Auth Providers" and "Create New User" pages to say "PHACILITY PHACILITY PHACILITY PHACILITY".
Test Plan: Browed to "Auth Providers" and "Create New User" on instanced and non-instanced installs, saw appropriate guidance.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9304
Differential Revision: https://secure.phabricator.com/D16861
Summary:
Ref T8510. When users type "platypus" into a typeahead, they want "Platypus Playground" to be a higher-ranked match than "AAA Platypus", even though the latter is alphabetically first.
Specifically, the rule is: results which match the query as a prefix of the result text should rank above results which do not.
I believe we now always get this right on the client side. However, WMF has at least one case (described in T8510) where we do not get it right on the server side, and thus the user sees the wrong result.
The remaining issue is that if "platypus" matches more than 100 results, the result "Platypus Playground" may not appear in the result set at all, beacuse there are 100 copies of "AAA Platypus 1", "AAA Platypus 2", etc., first. So even though the client will apply the correct sort, it doesn't have the result the user wants and can't show it to them.
To fix this, split the server-side query into two phases:
- In the first phase, the "prefix" phase, we find results that **start with** "platypus".
- In the second phase, the "content" phase, we find results that contain "platypus" anywhere.
We skip the "prefix" phase if the user has not typed a query (for example, in the browse view).
Test Plan:
This is a lot of stuff, but the new ranking here puts projects which start with "w" at the top of the list. Lower down the list, you can see some projects which contain "w" but do not appear at the top (like "Serious Work").
{F1913931}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8510
Differential Revision: https://secure.phabricator.com/D16838
Summary:
Ref T5267. When extrating data from `pht()` calls, also extract the argument types and export them into the map so they can be used by consumers.
We recognize plurals (`phutil_count()`, `new PhutilNumber`) and genders (`phutil_person()`). We'll need to annotate the codebase for those, since they're currently runtime-only.
Test Plan:
Rebuilt extraction maps, got data like this (note "number" type annotation).
```
"Scaling pool \"%s\" up to %s daemon(s).": {
"uses": [
{
"file": "/daemon/PhutilDaemonOverseer.php",
"line": 378
}
],
"types": [
null,
"number"
]
},
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16823
Summary:
Ref T11809. I missed this when adding a "Busy" status.
Also the other dot is orange? Just make them all orange for consistency.
Test Plan: Viewed `@username` of busy users (orange), away users (red).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16819
Summary:
Ref T11816.
- Now that we can do something meaningful with them, bring back the yellow dots for "busy".
- Default to "busy" when attending events (we could make this "busy" for short events and "away" for long events or something).
- Let users pick how to display their attending status on the event page.
- Also show which event the user is attending since I had to mess with the cache code anyway. We can get rid of this again if it doesn't feel good.
Test Plan:
{F1904179}
{F1904180}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D16802
Summary:
Ref T11809. We show a red dot next to a username to indicate that the user is away (on vacation, in a meeting, etc).
It's not very obvious what this means unless you know that's what it is: when you click the username or view a hovercard, there's no visual hint about what the red dot means. It does say "Away", but there is a lot of information and it doesn't visually connect the two.
Connect the two visually by putting a red dot next to the "Away" bit, too.
Test Plan:
Here's my version of it, this feels OK to me but could maybe be more designed:
{F1893916}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16791
Summary:
Ref T11809. As we move toward unprototyping, this panel is probably more relevant/dynamic/interesting more often than the badges panel, I think?
Particularly, I want to make the red dots a little easier to understand, and I think putting this above the fold will help aid discovery (red dot -> click -> see red dot -> see "away until ..." -> see calendar -> "oh they're at a meeting"?).
This is entirely a product/subjective thing so I'm fine with not doing it or using a different order.
I think there's maybe even an argument for putting this above "Projects", but "Projects" feels more core to me, at least for now.
Test Plan: Viewed a user profile, saw "Calendar" above "Badges".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16790
Summary: Ref T10747. Moves away from getDateFrom() / getDateTo() and makes a few more date/time methods more consistent.
Test Plan: Created, edited, viewed events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16663
Summary: Ref T10747. The CalendarDateTime object now carries the viewer timezone as part of its state, so we don't need to have separate accessors.
Test Plan:
- Viewed events, checked that crumbs render properly.
- Edited events.
- Created new events.
- Viewed calendar.
- Viewed event detail pages.
- Viewed profile mini-calendar.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16662
Summary:
Looking at IPs who recently registered more than one account in
Phabricator and trying to figure out whether they are spam bots
or just all on the same university network, I often want to check
recent user activity of these accounts. Hence linking the entries
in the User column to their user page comes in handy.
Test Plan: Tested on local instance and works as expected.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16620
Summary: Fixes T10715. Badges on the profile view now link to the badge view
Test Plan: Went to the profile view and clicked the link.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T10715
Differential Revision: https://secure.phabricator.com/D16604
Summary: Ref T8628. Updates people controllers for handleRequest
Test Plan: Viewed the people list, viewed the activity logs, then went through the approval process for a new user account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16451
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Ref T11326. This just cleans things up a little and removes some of the obvious layout/CSS issues.
Test Plan:
- Viewed day view before/after. Also viewed profile panel.
Before:
{F1725547}
After:
{F1725548}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16308
Summary:
Fixes T10633. When generating email about a transaction which adjusts a date, render the offset explicitly (like "UTC-7").
This makes it more clear in cases like this:
- mail is being sent to multiple users, and not necessarily using the viewer's settings;
- you get some mail while travelling and aren't sure which timezone setting it generated under.
Test Plan: Rendered in text mode, saw UTC offset.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10633
Differential Revision: https://secure.phabricator.com/D16287
Summary:
Ref T9275. This throws away the old EditController and switches fully to EditEngine.
There's still some sketchy behavior (particularly, no JS stuff yet) but I think all the basics work properly.
Test Plan: Created and edited events via EditEngine, everything seemed to work alright.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16283
Summary:
Ref T9275. Currently, the "Start Date", "End Date", and "Recurrence End Date" transcations take a complex value (AphrontFormDateControlValue) and reduce it to an epoch.
Do this a little earlier, since the API will be much more usable if it just passes in epoch timestamps.
Events also have some logic where they rewrite the from date and to date on the actual object for all day events, then undo the changes later. Specifically, if you have an all-day event on "July 24th", the exact start and end times vary based on who is looking at it. Instead of overwriting the persistent `dateFrom` and `dateTo` properties, add separate `viewer` properties to make it easier to keep this stuff straight.
Since this means all-day events get stored in UTC, we need to query/fetch (and then discard) slightly more events. This is perfectly and much simpler to do.
The one weird "UTC" hack in here will get nuked when this moves to EditEngine properly.
Test Plan: Edited times for normal events and all-day events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16274
Summary:
Ref T9275. When you create a recurring event which recurs forever, we want to avoid writing an infinite number of rows to the database.
Currently, we write a row to the database right before you edit the event. Until then, we refer to it as `E123/999` or whatever ("instance 999 of event 123").
This creates a big mess with trying to make recurring events work with EditEngine, Subscriptions, Projects, Flags, Tokens, etc -- all of this stuff assumes that whatever you're working with has a PHID.
I poked at letting this stuff work without a PHID a little bit, but that looked like a gigantic mess.
Instead, generate an event "stub" a little sooner (when you look at the event detail page). This is basically just an ID/PHID to refer to the instance.
Then, when you edit the stub, "materialize" it into a real event.
This still has some issues, but I think it's more promising than the other approach was.
Also:
- Removes dead user profile calendar controller.
- Replaces comments with EditEngine comments.
Test Plan:
- Commented on a recurring event.
- Awarded tokens to a recurring event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275
Differential Revision: https://secure.phabricator.com/D16248
Summary: Fixes T11198. These are confusing or premature if you aren't an activated user: disabled or unapproved accounts won't be able to act on them.
Test Plan: Changed timezone, went through flow to correct it
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11198
Differential Revision: https://secure.phabricator.com/D16167
Summary:
Ref T11034. This seems a little more promising. Two problems at the moment:
- This doesn't actually provide any useful information at all right now.
- Many object types have no profile images.
Test Plan:
{F1695254}
{F1695255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11034
Differential Revision: https://secure.phabricator.com/D16155
Summary:
Ref T11098. Mixture of issues here:
- Similar problem to D16112, where users with no settings at all could fail to fall back to the global defaults.
- I made `UserPreferencesQuery` responsible for building defaults instead to simplify this, since we have 4 or 5 callsites which need to do it and they aren't easily reducible.
- Handle cases where `metamta.one-mail-per-recipient` is off (and thus users can not have any custom settings) more explicitly.
- When `metamta.one-mail-per-recipient` is off, remove the "Email Format" panel for users only -- administrators can still access it in global preferences.
Test Plan:
- Deleted a user's preferences, changed globals, purged cache, made sure defaults reflected global defaults.
- Changed global mail tags, sent mail to the user, verified it was dropped in accordinace with global settings.
- Changed user's settings to get the mail instead, verified mail was sent.
- Toggled user's Re / Vary settings, verified mail subject lines reflected user settings.
- Disabled `metamta.one-mail-per-recipient`, verified user "Email Format" panel vanished.
- Edited "Email Format" in single-mail-mode in global prefs as an administrator.
- Sent more mail, verified mail respected new global settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16118
Summary:
Ref T11098. Users with at least one setting set correctly fall back to the defaults, but users with no settings at all currently do not.
Make them fall back to global defaults properly.
Test Plan:
- Set global defaults to some non-default setting.
- Completely delete a user's settings.
- `bin/cache purge --purge-all` or `--purge-user`.
- View settings as the user.
- Before change: showed hard-coded defaults instead of global defaults until you save anything.
- After change: properly shows global defaults from the start.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11098
Differential Revision: https://secure.phabricator.com/D16112
Summary:
Ref T4103. This just adds a single global default setting group, not full profiles.
Primarily, I'm not sure how administrators are supposed to set profiles for users, since most ways user accounts get created don't really support setting roles.. When we figure that out, it should be reasonably easy to extend this. There also isn't much of a need for this now, since pretty much everyone just wants to turn off mail.
Test Plan:
- Edited personal settings.
- Edited global settings.
- Edited a bot's settings.
- Tried to edit some other user's settings.
- Saw defaults change appropriately as I edited global and personal settings.
{F1677266}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16048
Summary:
Ref T4103. Two small improvements:
- Don't work as hard to validate translations. We just need to know if a translation exists, we don't need to count how many strings it has and build the entire menu.
- Allow `getUserSetting()` to work on any setting without doing all the application/visibility checks. It's OK for code to look at, say, your "Conpherence Notifications" setting even if that application is not installed for you.
Test Plan: Used XHProf and saw 404 page drop from ~60ms to ~40ms locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16046
Summary:
Ref T10077. Currently, we issue 6+ queries on every page to build this menu, since the menu is built application-by-application.
Build the menu with dedicated modules instead so a single "EditEngine" module can provide all of them with one query.
I'd like to reduce this to 0 queries but I'm not totally sure what we want to do with this menu.
This change removes these items, because EditEngine can not currently provide them:
- Calendar: Eventually via EditEngine eventually.
- Conpherence: Probably via EditEngine, doesn't seem too important.
- People: Maybe via EditEngine, doesn't seem too important? "Welcome" is likely better?
- Pholio: Eventually via EditEngine.
It adds a bunch of other items as a side effect:
{F1677151}
This reduces the queries issued on every page by ~5.
This also makes quick create actions visible while logged out (see T7073).
Test Plan:
- Viewed menu while logged in.
- Viewed menu while logged out.
- Viewed standalone version of menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10077
Differential Revision: https://secure.phabricator.com/D16045
Summary: Ref T4103. Ref T10078. We currently have separate "usable" and "raw" values, but can simplify this by making `newValueForUsers()` return the raw value.
Test Plan: Ran unit tests; browsed around; dropped caches and browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16043
Summary:
Ref T4103. Ref T10078. This puts a user cache in front of notification and message counts.
This reduces the number of queries issued on every page by 4 (2x building the menu, 2x building Quicksand data).
Also fixes some minor issues:
- Daemons could choke on sending mail in the user's translation.
- No-op object updates could fail in the daemons.
- Questionable data access pattern in the file query coming out of the profile file cache.
Test Plan:
- Sent myself notifications. Saw count go up.
- Cleared them by visiting objects and clearing all notifications. Saw count go down.
- Sent myself messages. Saw count go up.
- Cleared them by visiting threads. Saw count go down.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16041
Summary:
Ref T4103. Ref T10078. This moves profile image caches to new usercache infrastructure.
These dirty automatically based on configuration and User properties, so add some stuff to make that happen.
This reduces the number of queries issued on every page by 1.
Test Plan: Browsed around, changed profile image, viewed as self, viewed as another user, verified no more query to pull this information on every page
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16040
Summary:
Ref T4103. Ref T10078. Currently, when a user misses a cache we just build it for them.
This is the behavior we want for the the viewer (so we don't have to build every cache up front if we don't actually need them), but not the right behavior for other users (since it allows performance problems to go undetected).
Make inline cache generation strict by default, then make sure all the things that rely on cache data request the correct data (well, all of the things identified by unit tests, at least: there might be some more stuff I haven't hit yet).
This fixes test failures in D16040, and backports a piece of that change.
Test Plan: Identified and then fixed failures with `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16042
Summary: Ref T4103. This method has no more callers.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16039
Summary: Ref T4103. Also get rid of the weird cache clear that nothing else uses and which we don't actually need.
Test Plan:
- Resolved timezone conflict by ignoring it.
- Resolved timezone conflict by picking a valid timezone.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16037
Summary:
Ref T4103. These settings long-predate proper settings and are based on hard-coded user properties. Turn them into real settings.
(I didn't try to migrate the value since they're trivial to restore and only useful to developers.)
Test Plan:
- Toggled console on/off.
- Swapped tabs.
- Reloaded page, everything stayed sticky.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16029
Summary:
Ref T4103. Convert this into a proper internal setting and use transactions to mutate it.
Also remove some no-longer-used old non-modular settings constants.
Test Plan:
- Used policy dropdown, saw recently-used projects.
- Selected some new projects, saw them appear.
- Grepped for all removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16027
Summary:
Ref T4103. Conpherence is doing some weird stuff and has its own redudnant settings object.
- Get rid of `ConpherenceSettings`.
- Use `getUserSetting()` instead of `loadPreferences()`.
- When applying transactions, add a new mechanism to efficiently prefill caches (this will still work anyway, but it's slower if we don't bulk-fetch).
Test Plan:
- Changed global Conpherence setting.
- Created a new Conpherence, saw setting set to global default.
- Changed local room setting.
- Submitted messages.
- Saw cache prefill for all particpiants in database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16025
Summary:
Ref T4103. Some settings (like the collapsed/expanded state of the diff filetree) are currently ad-hoc. They weren't being read correctly.
Also, simplify the caching code a little bit.
Test Plan: Toggled filetree, reloaded page, got sticky behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16021
Summary:
Ref T4103. This is just incremental cleanup:
- Add "internal" settings, which aren't editable via the UI. They can still do validation and run through the normal pathway. Move a couple settings to use this.
- Remove `getPreference()` on `PhabricatorUser`, which was a sort of prototype version of `getUserSetting()`.
- Make `getUserSetting()` validate setting values before returning them, to improve robustness if we change allowable values later.
- Add a user setting cache, since reading user settings was getting fairly expensive on Calendar.
- Improve performance of setting validation for timezone setting (don't require building/computing all timezone offsets).
- Since we have the cache anyway, make the timezone override a little more general in its approach.
- Move editor stuff to use `getUserSetting()`.
Test Plan:
- Changed search scopes.
- Reconciled local and server timezone settings by ignoring and changing timezones.
- Changed date/time settings, browsed Calendar, queried date ranges.
- Verified editor links generate properly in Diffusion.
- Browsed around with time/date settings looking at timestamps.
- Grepped for `getPreference()`, nuked all the ones coming off `$user` or `$viewer` that I could find.
- Changed accessiblity to high-contrast colors.
- Ran all unit tests.
- Grepped for removed constants.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16015
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T4103. This doesn't get everything, but takes care of most of the easy stuff.
The tricky-ish bit here is that I need to move timezones, pronouns and translations to proper settings. I expect to pursue that next.
Test Plan:
- Grepped for `loadPreferences` to identify callsites.
- Changed start-of-week setting, loaded Calendar, saw correct start.
- Visited welcome page, read "Adjust Settings" point.
- Loaded Conpherence -- I changed behavior here slightly (switching threads drops the title glyph) but it wasn't consistent to start with and this seems like a good thing to push to the next version of Conpherence.
- Enabled Filetree, toggled in Differential.
- Disabled Filetree, no longer visible in Differential.
- Changed "Unified Diffs" preference to "Small Screens" vs "Always".
- Toggled filetree in Diffusion.
- Edited a task, saw sensible projects in policy dropdown.
- Viewed user profile, uncollapsed/collapsed side nav, reloaded page, sticky'd.
- Toggled "monospaced textareas", used a comment box, got appropriate fonts.
- Toggled durable column.
- Disabled title glyphs.
- Changed monospaced font to 18px/36px impact.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16004
Summary:
Ref T4103. Currently, we issue a `SELECT * FROM user_preferences ... WHERE userPHID = ...` on every page to load the viewer's settings.
There are several other questionable data accesses on every page too, most of which could benefit from improved caching strategies (see T4103#178122).
This query will soon get more expensive, since it may need to load several objects (e.g., the user's settings and their "role profile" settings). Although we could put that data on the User and do both in one query, it's nicer to put it on the Preferences object ("This inherits from profile X") which means we need to do several queries.
Rather than paying a greater price, we can cheat this stuff into the existing query where we load the user's session by providing a user cache table and doing some JOIN magic. This lets us issue one query and try to get cache hits on a bunch of caches cheaply (well, we'll be in trouble at the MySQL JOIN limit of 61 tables, but have some headroom).
For now, just get it working:
- Add the table.
- Try to get user settings "for free" when we load the session.
- If we miss, fill user settings into the cache on-demand.
- We only use this in one place (DarkConsole) for now. I'll use it more widely in the next diff.
Test Plan:
- Loaded page as logged-in user.
- Loaded page as logged-out user.
- Examined session query to see cache joins.
- Changed settings, saw database cache fill.
- Toggled DarkConsole on and off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16001
Summary:
Ref T6299. This makes more of the links point to the right places.
Not covered yet:
- Projects and subscribers don't point to the right place (this is a little tricky to fix, I think).
- `[[ #anchor ]]`s won't do the right thing in, uh, email, I guess, since `uri.here` is not set. This is also a little tricky.
Possibly we should just remove subscribers (although also kind of tricky).
Test Plan: On a custom-domain blog, observed that fewer things were broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6299
Differential Revision: https://secure.phabricator.com/D16007
