Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary:
The documentation is explicit that Git does not pass this flag:
The $GIT_SSH command will be given exactly two arguments: the username@host (or just host) from the URL and the shell command to execute on that remote system.
This isn't true; it does. Accommodate it.
I'll see if I can fix this in the upstream, too.
Test Plan: Ran various `ssh-connect` commands with -p, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7680
Summary: The "easy setup" is sort of an exaggeration since it basically just amounts to getting you logged in correctly, but it will probably be more true in the future.
Test Plan: Ran `bin/accountadmin` with zero and more than zero accounts.
Reviewers: asherkin, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7678
Summary: Some oldschool users create accounts via bin/accountadmin, which
messes up the first-time setup process. Auto-approve these accounts, as this
better aligns with user expectation.
Auditors: btrahan
Summary: If no ssh keys are in phabricator, bin/ssh-auth errors with undefined `$lines`. This fixes that case and explicitly tells the user no rows were found.
Test Plan: Ran bin/ssh-auth before and after change with no ssh keys in the system. Error goes away after change.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7675
Summary: Fixes T2230. This isn't a total walk in the park to configure, but should work for early adopters now.
Test Plan: Read documentation, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7634
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary:
This adds a Drydock blueprint for preallocated, remote hosts. This will be used by the Harbormaster interface to allow users to specify remote hosts that builds can be run on.
This adds a `canAllocateResource` method to Drydock blueprints; it is used to detect whether a blueprint can allocate a resource for the given type and attributes.
Test Plan:
Ran:
```
bin/drydock lease --type host --attributes remote=true,preallocated=true,host=192.168.56.101,port=22,user=james,keyfile=,path=C:\\Build\\,platform=windows
```
and saw the "C:\Build\<id>" folder appear on the remote Windows machine. Viewed the lease and resource in Drydock as well.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7593
Summary:
This cleans up some garbage:
- We were specifying environmental variables with `X=y git ...`, but now have `setEnv()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setEnv()`.
- We were specifying the working directory with `(cd %s && git ...)`, but now have `setCWD()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setCWD()`.
- We were specifying the Git credentials with `ssh-agent -c (ssh-add ... && git ...)`. We can do this more cleanly with `GIT_SSH`. Use `GIT_SSH`.
- Since we have to write a script for `GIT_SSH` anyway, use the same script for Subversion and Mercurial.
This fixes two specific issues:
- Previously, we were not able to set `-o StrictHostKeyChecking=no` on Git commands, so the first time you cloned a git repo the daemons would generally prompt you to add `github.com` or whatever to `known_hosts`. Since this was non-interactive, things would mysteriously hang, in effect. With `GIT_SSH`, we can specify the flag, reducing the number of ways things can go wrong.
- This adds `LANG=C`, which probably (?) forces the language to English for all commands. Apparently you need to install special language packs or something, so I don't know that this actually works, but at least two users with non-English languages have claimed it does (see <https://github.com/facebook/arcanist/pull/114> for a similar issue in Arcanist).
At some point in the future I might want to combine the Arcanist code for command execution with the Phabricator code for command execution (they share some stuff like LANG and HGPLAIN). However, credential management is kind of messy, so I'm adopting a "wait and see" approach for now. I expect to split this at least somewhat in the future, for Drydock/Automerge if nothing else.
Also I'm not sure if we use the passthru stuff at all anymore, I may just be able to delete that. I'll check in a future diff.
Test Plan: Browsed and pulled Git, Subversion and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7600
Summary: Fixed a small bug that caused the catch-all commit to purge previously added symbols in that session.
Test Plan: Re-ran the script, observed corrected behavior.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7597
Summary:
Modified the import script so it will only try to load a configurable
number of symbols at a time to avoid exhausting memory for large project
imports.
I haven't written a line of PHP in more than a decade, so please forgive
any stylistic or technical errors.
Test Plan: Ran the script on symbol table generated from linux kernel.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4117
Differential Revision: https://secure.phabricator.com/D7596
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: This is kind of a quick hack to make symbol lookup work for C#. ctags calls C# 'csharp', while pygments recognises it as 'cs' (or at least, I have to put 'cs' in the Arcanist indexed languages for the clickables to appear, while it's 'csharp' in the symbol database).
Test Plan: Tested this in my live install and it makes symbol lookup work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7497
Summary: Ref T4068. Adds a command to list all commits in an "importing" status. This will allow users to use `reparse.php` to diagnose and repair issues.
Test Plan:
- Ran `bin/repository importing P`, etc.
- Used `reparse.php` to reparse some commit stages and saw status update correctly.
- Ran on a repo with no importing commits.
- Ran with `... --simple | xargs`, which saves us having to put an `awk` or something in there for users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7515
Summary:
Ref T4068. In some cases like that one, I anticipate a repository not fully importing when a handful of random commits are broken. In the long run we should just deal with that properly, but in the meantime provide an administrative escape hatch so you can mark the repository as imported and get it running normally.
The major reason to do this is that Herald, Feed, Harbormaster, etc., won't activate until a repository is "imported".
Test Plan:
- Tried to mark an imported repository as imported, got an "already imported" message.
- Same for not-imported.
- Marked a repository not-imported.
- Marked a repository imported.
- Marked a repository not-imported, then waited for the daemons to mark it imported again automatically.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kbrownlees
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7514
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary: A set of random icons for use as project identifiers. 42, white.
Test Plan: photoshop, epriestley
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7290
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary: Ref T603. We might need a fine-grained CLI tool later on, but here's a bat we can bludgeon things with.
Test Plan:
- Ran `bin/policy unlock D12` (adjusted policies).
- Ran `bin/policy unlock rPca85c457ebcb` (got "not mutable" stuff).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7189
Summary:
Ref T603. I want to provide at least a basic CLI tool for fixing policy problems, since there are various ways users can lock themselves out of objects right now. Although I imagine we'll solve most of them in the application eventually, having a workaround in the meantime will probably make support a lot easier.
This implements `bin/policy show <object>`, which shows an object's policy settings. In a future diff, I'll implement something like `bin/policy set --capability view --policy users <object>`, although maybe just `bin/policy unlock <object>` (which sets view and edit to "all users") would be better for now. Whichever way we go, it will be some blanket answer to people showing up in IRC having locked themselves out of objects which unblocks them while we work on preventing the issue in the first place.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7171
Summary: Add a couple more resources that we need on most pages.
Test Plan: Regenerated resources, viewed homepage.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7155
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary: Fixes T3679. This comes up every so often and the old script is extremely broad (nuke everything in a repository). Provide a more surgical tool.
Test Plan: Ran a bunch of variations of the script and they all seemed to work OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, staticshock
Maniphest Tasks: T3679
Differential Revision: https://secure.phabricator.com/D6678
Summary: Ref T3557. Make it easier to access full daemon logs from the CLI.
Test Plan: {F51265}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6547
Summary:
Ref T1670. Prepare for the overseers to talk directly to the database instead of using Conduit. See T1670 for discussion.
This shouldn't impact anything, except it has a very small chance of destabilizing the overseers.
Test Plan:
Ran `phd launch`, `phd debug`, `phd start`.
Ran with `--trace-memory` and verified elevated but mostly steady memory usage (8MB / overseer). This climbed by 0.05KB / sec (4MB / day) but the source of the leaks seems to be the cURL calls we're making over Conduit so this will actually fix that. Disabling `--conduit-uri` reported steady memory usage. I wasn't able to identify anything leaking within code we control. This may be something like a dynamic but capped buffer in cURL, since we haven't seen any issues in the wild.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6534
Summary:
Ref T1670. Mostly, use PhutilArgumentParser. This breaks up the mismash of functional stuff and PhabriatorDaemonControl into proper argumentparser Workflows.
There are no functional changes, except that I removed the "pingConduit()" call prior to starting daemons, because I intend to remove all Conduit integration.
Test Plan:
- Ran `phd list`.
- Ran `phd status` (running daemons).
- Ran `phd status` (no running daemons).
- Ran `phd stop <pid>` (dead task).
- Ran `phd stop <pid>` (live task).
- Ran `phd stop zebra` (invalid PID).
- Ran `phd stop 1` (bad PID).
- Ran `phd stop`.
- Ran `phd debug zebra` (no match).
- Ran `phd debug e` (ambiguous).
- Ran `phd debug task`.
- Ran `phd launch task`.
- Ran `phd launch 0 task` (invalid arg).
- Ran `phd launch 2 task`.
- Ran `phd help`.
- Ran `phd help list`.
- Ran `phd start`.
- Ran `phd restart`.
- Looked at Repositories (daemon running).
- Looked at Repositories (daemon not running).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6490
Summary: Fixes T3553. Did it by adding some code that refreshes the File object on keyup events within a given file entry. also fixes an html derp I found trying to fix this.
Test Plan: added cool things like 'bbb' to every field and noted they were maintained when I added more files
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, Korvin, chad
Maniphest Tasks: T3553
Differential Revision: https://secure.phabricator.com/D6488
Summary: Status icons for next to people names
Test Plan: photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2064
Differential Revision: https://secure.phabricator.com/D6479
Summary:
Ref T3306. Moves this from the web to the CLI, which is a tiny bit clunkier but way better as far as policies go and more repeatable for development.
See discussion in D6413.
Test Plan: Ran `bin/mail receive-test`, verified mail was received. Used and abused various options.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3306
Differential Revision: https://secure.phabricator.com/D6417
Summary: This makes it namespace/database/connection aware and a little easier to find. Also use pht() / PhutilConsole.
Test Plan: Ran `bin/storage probe`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6341
Summary:
Ref T603. This introduces a policy-aware DifferentialDiffQuery and converts most callsites.
I've left unusual callsites (mostly: hard to get the viewer, unusual query, queries related to active diffs) alone for now, so this isn't exhaustive but hits 60-80% of sites.
Test Plan: Created diff; created revision; viewed diffs and revisions; made additional conduit calls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6338
Summary:
Ref T2852. I want to model Asana integration as a response to feed events. Currently, we queue one feed event for each HTTP hook.
Instead, always queue one feed event and then have it queue any necessary followup events (now, http hooks; soon, asana).
Add a script to make it easy to reproducibly fire feed event publishing.
Test Plan:
Republished a feed event and verified it hit configured HTTP hooks correctly.
$ ./bin/feed republish 5765774156541908292 --trace
>>> [2] <connect> phabricator2_feed
<<< [2] <connect> 1,660 us
>>> [3] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [3] <query> 595 us
>>> [4] <connect> phabricator2_differential
<<< [4] <connect> 760 us
>>> [5] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [5] <query> 478 us
>>> [6] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [6] <query> 449 us
>>> [7] <connect> phabricator2_user
<<< [7] <connect> 1,062 us
>>> [8] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [8] <query> 540 us
>>> [9] <connect> phabricator2_file
<<< [9] <connect> 951 us
>>> [10] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [10] <query> 498 us
>>> [11] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [11] <query> 507 us
Republishing story...
>>> [12] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [12] <query> 685 us
>>> [13] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [13] <query> 489 us
>>> [14] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [14] <query> 512 us
>>> [15] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [15] <query> 601 us
>>> [16] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [16] <query> 405 us
>>> [17] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [17] <query> 551 us
>>> [18] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [18] <query> 507 us
>>> [19] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [19] <query> 428 us
>>> [20] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [20] <query> 419 us
>>> [21] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [21] <query> 591 us
>>> [22] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [22] <query> 406 us
>>> [23] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [23] <query> 593 us
>>> [24] <http> http://127.0.0.1/derp/
<<< [24] <http> 746,157 us
[2013-06-24 20:23:26] EXCEPTION: (HTTPFutureResponseStatusHTTP) [HTTP/500] Internal Server Error
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6291
Summary: Ref T2852. Provide a script for inspecting/debugging OAuth token refresh.
Test Plan: Ran `bin/auth refresh` with various arguments, saw token refreshes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6276
Summary:
Ref T2222.
I'm thinking about how I want to approach the Asana sync, and I want to try to do T2222 first so that we can build it cleanly on top of ApplicationTransactions. I think we can at least walk down this road a little bit and if it turns out to be scary we can take another approach.
I was generally very happy with how the auth migration turned out (seemingly, it was almost completely clean), and want to pursue a similar strategy here. Basically:
- Wrap the new objects in the old objects for reads/writes.
- Migrate all the existing data to the new table.
- Everything hard is done; move things over a piece at a time at a leisurely pace in lots of smallish, relatively-easy-to-understand changes.
This deletes or abstracts all reads of the DifferentialComment table. In particular, these things are **deleted**:
- The script `undo_commits.php`, which I haven't pointed anyone at in a very long time.
- The `differential.getrevisionfeedback` Conduit method, which has been marked deprecated for a year or more.
- The `/stats/` interface in Differential, which should be rebuilt on Fact and has never been exposed in the UI. It does a ton of joins and such which are prohibitively difficult to migrate.
This leaves a small number of reading interfaces, which I replaced with a new `DifferentialCommentQuery`. Some future change will make this actually load transactions and wrap them with DifferentialComment interfaces.
Test Plan: Viewed a revision; made revision comments
Reviewers: btrahan
Reviewed By: btrahan
CC: edward, chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D6260
Summary: Ref T1536. This script basically exists to restore access if/when users shoot themselves in the foot by disabling all auth providers and can no longer log in.
Test Plan: {F46411}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6205
Summary: Rough pass at a PHUIButtonView Class. Keeps phutil_tag intact and adds some image features if you use the class.
Test Plan: UIExamples
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6192
Summary: Took a stab at some login icons for buttons.
Test Plan: photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6174
Summary:
We can lose file data through various means; one reasonable way is if files get deleted from disk with 'local-disk' storage. If data goes missing,
Ref T3265. Also, reduce some code duplication.
Test Plan:
Ran `bin/files purge`, `bin/files migrate`, `bin/files rebuild` with various args.
Deleted a file with "local-disk" storage, ran `bin/files purge`, made sure it got picked up.
Reviewers: dctrwatson, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3265
Differential Revision: https://secure.phabricator.com/D6068
Summary:
See <https://github.com/facebook/phabricator/issues/323>. We have a very old cache management script which doesn't purge all the modern caches (and does purge some caches which are no longer in use). Update it so it purges all the modern caches (remarkup, general, changeset), no longer purges outdated caches, and is easier to use.
Also delete a lot of "this script has moved" scripts from the last few rounds of similar cleanup, I believe all of these have been in master for at least several months, which should be enough time for users to get used to the new stuff.
Test Plan: Ran `bin/cache` with various arguments. Verified caches were purged.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5978
Summary: We can't show this stuff on the web UI because it has password reset links and private reply-to addresses, but we can provide easier CLI tools than "root around in the database". Land a rough version of `bin/mail show-inbound` and `bin/mail show-outbound`.
Test Plan: Used both commands to examine mail from the CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: tido, euresti, aran
Differential Revision: https://secure.phabricator.com/D5963
Summary: Basically a one line change, plus a regen. This should be the last full-rewrite these things get since they'll stop fully rehashing all the time now.
Test Plan: See D5964.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5965
Summary:
See <https://github.com/facebook/phabricator/issues/320>. Files can end up with a bad MIME type, and we don't update it when uploading another copy of the file since obviously the new copy has the same data and thus the same MIME type.
- Rename `bin/files metadata` to `bin/files rebuild` to make it a more consistent verb.
- Let it rebuild MIME types so users who hit issues like this can run `bin/files rebuild --all --rebuild-mime` to straighten things out.
Test Plan: Ran `bin/files` in various modes, examined output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5951
Summary:
We/I broke a couple of things here recently (see D5911) and are doing some work here in general (see D5912, etc.).
Generally, this code is pretty oldschool and not especially well architected for modern application-oriented Phabricator. It hardcodes a lot of stuff which should be applications' responsibilites.
Take the first steps toward making it more solid to reduce the risk here. In particular:
- Factor out the "self mail" and "duplicate mail" checks and add unit tests.
- Make Message-ID hash handling automatic.
Test Plan: Ran unit tests.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5915
Summary:
We have a few interfaces where add "Edit", "Delete" or some other action to a list. Currently, this happens via icons, but these are cumbersome and weird, are inconsistent, can't be workflow'd, are hard to hit on desktops and virtually impossible to hit on mobile, and generally just feel iffy to me. Prominent examples are Projects and Flags. I'd like to try adding an "edit" action to Maniphest (to provide quick edit from list views, basically). It looks like some of Releeph would benefit here, as well.
Instead, provide first-class actions:
{F42978}
They produce targets which my meaty ham-fists can plausibly hit on mobile, too:
{F42979}
(We could do some kind of swipe-to-expose thing eventually, but I think putting them by default is OK?)
Test Plan: Added UIExamples. Checked desktop/mobile.
Reviewers: chad, btrahan, edward
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5890
Summary:
Sometimes it seems necessary to force a reparse of recent commits in
production, it took me longer than expected to get this right.
To make this easier, document the usage of --min-date
further with usage examples and print a usage exception with the input
if the supplied value isn't accepted by MySQL.
(otherwise all commits will be affected in the case of user error)
Test Plan:
.. create TEST repo with commits dated 2013-04-03 ..
$ ./reparse.php --all TEST --owners --min-date "2013a-04-03 10:30:19"
.. see usage exception - invalid timestamp ..
$ ./reparse.php --all TEST --owners --min-date "2013-04-03 10:30:19"
.. reparse commits ok ..
$ ./reparse.php --all TEST --owners --min-date "2013-04-04 10:30:19"
.. see 'No commits have been discovered' ..
$ ./reparse.php --all TEST --owners
.. reparse commits ok ..
$ ./reparse.php --help
.. looks ok to me ..
$ ./reparse.php --all TEST --owners --min-date 2013-04-03 10:30:19
.. see error - interprets 10:30:19 as commit and refuses ..
$ ./reparse.php --all TEST --owners --min-date <<first commit time>>
.. parse this commit and following ..
$ ./reparse.php <<revision_id>> --owners --min-date <<first commit time>>
.. see error - insist on --all if --min-date ..
$ ./reparse.php <<revision_id>> --owners
.. ok ..
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5579
Summary: First pass at 'action icons' for headers and other items. Ties into future diff.
Test Plan: photoshop, read the css.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5565
Summary: Fixes T2861. This used to work but I think I broke it when I made the notification popup thing work. Merge it into the drag-and-drop since 90% of the code is the same anyway.
Test Plan: Pasted files into Chrome and got uploads. This doesn't work in Safari and Firefox; as far as I know it isn't supported in those browers.
Reviewers: blc, btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2861
Differential Revision: https://secure.phabricator.com/D5530
Summary:
Fixes T2458. Ref T2843. @tido's email from T2843 has exhausted its retries and failed, but we want to try it again with the patch from D5464 to capture the actual error. This sort of thing has come up a few times in debugging, too.
Also fixed some stuff that came up while debugging this.
Test Plan:
- Ran command with no args.
- Ran resend with no args.
- Ran resend with bad IDs.
- Ran resend with already-queued messages, got "already queued" error.
- Ran resend with already-sent message, got requeue.
Reviewers: btrahan, tido
Reviewed By: tido
CC: aran
Maniphest Tasks: T2458, T2843
Differential Revision: https://secure.phabricator.com/D5493
Summary: Same as title
Test Plan: By checking in Phriction UI in Phabricator
Reviewers: epriestley, AnhNhan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5327
Summary:
this diff does a few, not so exciting things
- changes "conpher" to "conpherence" where it snuck into CSS, spritemap, etc -- I believe we now consistently call it conpherence. Feel free to change it, just change it everywhere. :D
- puts the widget icons in the right order per M14
- makes the "mobile-only" widgets show the toggles only in the mobile view
- also made it so clicking them does nothing for now
- removes the tasks widget since we don't want it
...my time is getting chopped up funny (yay puppy) so this is just an attempt at something that can go into the codebase and not make it worse. Next up is making the widgets that show on desktop look right / not say "TODO"
Test Plan: played around in Conpherence
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2530
Differential Revision: https://secure.phabricator.com/D5334
Summary:
Ref T2700. Allow JS to listen for swipes on devices.
There are a bunch of tricky cases here and I probably didn't get them all totally right, but this interaction broadly looks like this:
- We implement gesture recognition for the mouse in device modes (narrow browser), and for touch events from an actual device.
- The sigil `touchable` indicates that a node wants to react to touch events.
- When the user touches a `touchable` node, we start listening for moves. They might be tapping/clicking (in which case we don't care), but they might also be gesturing.
- Once the user moves their finger/pointer far enough away from the tap origin, we recognize it as a gesture. I hardcoded this at 20px; I wasn't able to find any "official" Apple value, but 20px seems like a common default.
- At this point, we look at where their finger has moved.
- If they moved it mostly up/down, we interpret the gesture as "scroll" and just stop listening. The device does its own thing.
- However, if they moved it mostly left/right, we interpret it as a "swipe". We start killing the moves so the device doesn't scroll.
- Once we've recognized that a gesture is underway, we send a "gesture.swipe.start" event and then "gesture.swipe.move" events for every move.
- When the user ends the gesture, we send "gesture.swipe.end".
- If the user cancels the gesture (currently, only by tapping with a second finger), we send "gesture.swipe.cancel".
- Gesture events have raw position data and some convenience fields.
Test Plan:
Wrote UI example and used it from the Desktop, iPhone simulator, and a real iphone.
- The code always seems to get "scroll" vs "swipe" correct (i.e., consistent with my intentions).
- The threshold feels pretty good to me.
- Tapping with a second finger cancels the action.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2700
Differential Revision: https://secure.phabricator.com/D5308
Test Plan:
Applied the patch.
Looked at blame and plain blame of SVN and Git file.
Ran the lint saver.
Looked at lint messages list.
/diffusion/lint/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5218
Summary:
I have blame enabled by default and displaying files with long history takes easily over 10 seconds.
Load the blame data by AJAX instead.
This is actually doing more work and the total response time is longer but it's worth it for me as I am interested just in the file contents quite often.
I know you were talking about building blame cache but until we have it...
I'm not sure if the AJAX loading indicator in bottom right corner is enough to inform the user that we are loading it on background.
Test Plan:
?view=highlighted
?view=plainblame
?view=blame
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5244
Summary:
For a single line, I can use the right click.
But for highlighting multiple lines, I have to wait for page reload.
It would be nice to track this in history but that's more involved.
This is actually maybe better behavior.
Test Plan: Clicked on the line link, dragged and dropped on it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5172
Summary:
Fixes T2059. Ref T2517.
Currently, you can run `bin/storage upgrade` with `--user` and `--password` arguments. However, these clownishly apply only to `.sql` patches -- the `.php` migrations still use the default user and password.
This is dumb. Stop doing it. Respect `--user` and `--password` for PHP patches.
(I implemented "override", which is very similar to "repair", but kept them separate since I think they're semantically distinct enough to differentiate.)
Test Plan: Ran `./bin/storage upgrade --user x --pass y --apply phabricator:20130219.commitsummarymig.php`. Verified the correct user and password were used both for the initial connect and patch application.
Reviewers: chad, vrana
Reviewed By: chad
CC: aran
Maniphest Tasks: T2059, T2517
Differential Revision: https://secure.phabricator.com/D5115
Summary:
Some transactions (like editing configuration values, task descriptions, or Conpherence images) can't be simply explained and need an additional larger element to show them fully (like a text diff).
Support change details like this in ApplicationTransactions. Implements the element in Config, so you can see changes.
Test Plan: {F32974}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2213
Differential Revision: https://secure.phabricator.com/D4984
Summary:
The map had "conph" but everything else refers to "conpher". The "conph" sprite thing won when I regenerated sprites for tokens.
I should just fix this so it can't happen, but unbreak for now. Renamed "conph" -> "conpher", regenerated sprites, nuked all the "conph" stuff.
Test Plan: Looked at Conpherence, saw icons.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4982
Summary: Pare this down to the bare bones. Diviner is going away soon anyway.
Test Plan: Read instructions.
Reviewers: edward
Reviewed By: edward
CC: aran
Differential Revision: https://secure.phabricator.com/D4951
Summary: Convert most phabricator_render_form callsites. In the case of the "headsup view", it converts it by deleting the element entirely (this is the very old Maniphest/Differential header which we no longer use).
Test Plan: Poked around a bit.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4726
Summary:
This accomplishes three major goals:
# Fixes phutil_render_tag -> phutil_tag callsites in DarkConsole.
# Moves the Ajax request log to a new panel on the left. This panel (and the tabs panel) get scrollbars when they get large, instead of making the page constantly scroll down.
# Loads the panel content over ajax, instead of dumping it into the page body / ajax response body. I've been planning to do this for about 3 years, which is why the plugins are architected the way they are. This should make debugging easier by making response bodies not be 50%+ darkconsole stuff.
Additionally, load the plugins dynamically (the old method predates library maps and PhutilSymbolLoader).
Test Plan:
{F30675}
- Switched between requests and tabs, reloaded page, saw same tab.
- Used "analyze queries", "profile page", triggered errors.
- Verified page does not load anything by default if dark console is closed with Charles.
- Generally banged on it a bit.
Reviewers: vrana, btrahan, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4692
Summary: Let's see if I did this right. This adds on and off state icons (1 and 2x) for conpherence. I think I need to tweak and add more CSS to have the off hover state be the on icon. Will check.
Test Plan: spritegen
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2400
Differential Revision: https://secure.phabricator.com/D4709
Summary:
Submoduling is slightly convenient for developers but hellishly difficult for many users. Since we make about a dozen updates to Javelin per year, just include the source directly.
Even if we run `git submodule status` more often, this creates additional problems for users with PATH misconfigured.
Fixes T2062 by nuking it from orbit.
Test Plan: Loaded site, browsed around. Grepped for references to submodules.
Reviewers: btrahan, vrana
CC: aran
Maniphest Tasks: T2062
Differential Revision: https://secure.phabricator.com/D4581
Summary: These have been marked as deprecated since May 2012. Clean them up.
Test Plan: Grepped for `repository-launch`, `phd_load_tracked_repositories`: no hits.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4575
Summary:
As far as I know, we never actually need `php` to be available from the web UI. I think the history here is:
- Long ago, we checked for 'pcntl' as an extension during setup.
- Someone had an install where 'pcntl' was available from the CLI, but not the web UI. So we switched the check to use the CLI.
- Someone had an install where the CLI binary was php-fpm, which caused the 'pcntl' check to loop endlessly, so we added more checks.
But we don't actually need to do any of this -- when the user tries to run the daemons, they get an explicit message that they need to install pcntl already, and we never (as far as I know) try to run PHP scripts from the web UI other than the pcntl_available.php check (we only run `git`, `svn`, `hg`, `ssh-agent`, `diff`, `xhpast` and `pygmentize`, I think).
Test Plan: Thought carefully about places we might execute PHP scripts from the web UI. Looked through /scripts/ to try to identfiy anything we might execute.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4568
Summary: Connection takes .3s from dev server to master.
Test Plan:
$ bin/storage --trace upgrade --namespace x
$ bin/storage --trace destroy --namespace x
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4480
Summary:
See discussion in D4438. Allows users to customize application tiles, and implements generally reasonable defaults so they hopefully won't.
Sizes are "invisible" (internal only, used to hide admin apps from non-admins), "hidden" (hide by default, show after clicking "Show More Applications"), "show" (show a small square tile) and "full" (show a full-width tile with subtitle).
Test Plan:
Default view for a non-admin:
{F29375}
Adjusted settings, hidden:
{F29373}
Adjusted settings, shown:
{F29374}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4439
Summary:
No fancy-pants smarty stuff yet, but merges /applications/ and the awful application buttons into the dark navigation.
Hover state is maybe a little weird.
Test Plan: {F29324}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran, btrahan, codeblock
Differential Revision: https://secure.phabricator.com/D4431
Summary: Move all navs to use the newer-style, darker, textured look. I'm //pretty// sure this doesn't break anything.
Test Plan: Looked at a bunch of apps.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4376
Summary:
This implements most/all of the difficult parts of Diviner on top of Phabricator instead of as standalone components. See T988. In particular, here are the things I want to fix:
**Performance** The Diviner parser works in two stages. The first stage breaks source files into "Atoms". The second stage renders atoms into a display format (e.g., HTML). Diviner currently has a good caching story on the first step of the pipeline, but zero caching in the second step. This means it's very slow, even for a fairly small project like Phabricator. We must re-render every piece of documentation every time, instead of only changed documentation. Most of this diff concerns itself with addressing this problem. There's a fairly large explanatory comment about it, but the trickiest part is that when an atom changes, other atoms (defined in other places) may also change -- for example, if `class B extends A`, editing A should dirty B, even if B is in an entirely different file. We perform analysis in two stages to propagate these changes: first detecting direct changes, then detecting indirect changes. This isn't completely implemented -- we need to propagate 'extends' through more levels -- but I believe it's structurally correct and good enough until we actually document classes.
**Inheritance** Diviner currently has a very weak story on inheritance. I want to inherit a lot more metas/docs. If an interface documents a method, we should just pull that documentation in to every implementation by default (implementations can still override it if they want). It can be shown in grey or something, but it should be desirable and correct to omit documentation of a method implementation when you are implementing a parent. Similarly, I want to pull in inherited methods and @tasks and such. This diff sets up for that, by formalizing "extends" relationships between atoms.
**Overspecialization** Diviner currently specializes atoms (FileAtom, FunctionAtom, ClassAtom, etc.). This is pretty much not useful, because Atomizers (which produce the atoms) need to be highly specialized, and Renderers/Publishers (which consume the atoms) also need to be highly specialized. Nothing interesting actually lives in the atom specializations, and we don't benefit from having them -- it just costs us generality in storage/caches for them. In the new code, I've used a single Atom class to represent any type of atom.
**URIs** We have fairly hideous URIs right now, which are very cumbersome For in-app doc links, I want to provide nice URIs ("/h/notfications" or similar) which are stable redirects, and probably add remarkup for it: !{notifications} or similar. This diff isn't related to that since it's too premature.
**Search** Once we have a database generation target, we can index the documentation.
**Design** Chad has some nice mocks.
Test Plan: Ran `bin/diviner generate`, `bin/diviner generate --clean`. Saw appropriate graph propagation after edits. This diff doesn't do anything very useful yet.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T988
Differential Revision: https://secure.phabricator.com/D4340
Summary: Also provide a way to update old files metadata.
Test Plan: Create a revision which includes a image file. Check whether the widht, height metadata exists. Run `scripts/files/manage_files.php metadata --all` to update previously uploaded files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D4347
Summary: this can happen if you have Phabricator and email lists co-mingling such that Phabricator receives an email multiple times. we can prevent this from then spamming everyone or otherwise taking the action multiple times by storing a message id hash and dropping the message if we have more than one message that matches.
Test Plan: simulated sending the same email multiple times on the command line. noted only the first one made it through.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1726
Differential Revision: https://secure.phabricator.com/D4328
Summary: We have enough z-index rules that they're fairly hard to visualize with "git grep". Consolidate them. Then fix T2253 (missing z-index on left menu background).
Test Plan: Made a Differential window really narrow, then scrolled it horizontally.
Reviewers: btrahan, chad, ender
Reviewed By: chad
CC: aran
Maniphest Tasks: T2253
Differential Revision: https://secure.phabricator.com/D4302
Summary:
See discussion in T2221. Before we can move configuration to the database, we have a bootstrapping problem: we need database credentials to live //somewhere// if we can't guess them (and we can only really guess localhost / root / no password).
Some options for this are:
- Have them live in ENV variables.
- These are often somewhat unfamiliar to users.
- Scripts would become a huge pain -- you'd have to dump a bunch of stuff into ENV.
- Some environments have limited ability to set ENV vars.
- SSH is also a pain.
- Have them live in a normal config file.
- This probably isn't really too awful, but:
- Since we deploy/upgrade with git, we can't currently let them edit a file which already exists, or their working copy will become dirty.
- So they have to copy or create a file, then edit it.
- The biggest issue I have with this is that it will be difficult to give specific, easily-followed directions from Setup. The instructions need to be like "Copy template.conf.php to real.conf.php, then edit these keys: x, y, z". This isn't as easy to follow as "run script Y".
- Have them live in an abnormal config file with script access (this diff).
- I think this is a little better than a normal config file, because we can tell users 'run phabricator/bin/config set mysql.user phabricator' and such, which is easier to follow than editing a config file.
I think this is only a marginal improvement over a normal config file and am open to arguments against this approach, but I think it will be a little easier for users to deal with than a normal config file. In most cases they should only need to store three values in this file -- db user/host/pass -- since once we have those we can bootstrap everything else. Normal config files also aren't going away for more advanced users, we're just offering a simple alternative for most users.
This also adds an ENVIRONMENT file as an alternative to PHABRICATOR_ENV. This is just a simple way to specify the environment if you don't have convenient access to env vars.
Test Plan: Ran `config set x y`, verified writes. Wrote to ENVIRONMENT, ran `PHABRICATOR_ENV= ./bin/repository`.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4294
Summary:
We have a bunch of code duplication now between __init_script__.php and webroot/index.php. Consoldiate these methods and move them into PhabricatorEnv.
Merge PhabricatorRequestOverseer into PhabricatorStartup.
Test Plan: Loaded page, ran script. Wiped PHABRICATOR_ENV; loaded page, ran script; got errors.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4283
Summary:
The search indexing API has several problems right now:
- Always runs in-process.
- It would be nice to push this into the task queue for performance. However, the API currently passses an object all the way through (and some indexers depend on preloaded object attributes), so it can't be dumped into the task queue at any stage since we can't serialize it.
- Being able to use the task queue will also make rebuilding indexes faster.
- Instead, make the API phid-oriented.
- No uniform indexing API.
- Each "Editor" currently calls SomeCustomIndexer::indexThing(). This won't work with AbstractTransactions. The API is also just weird.
- Instead, provide a uniform API.
- No uniform CLI.
- We have `scripts/search/reindex_everything.php`, but it doesn't actually index everything. Each new document type needs to be separately added to it, leading to stuff like D3839. Third-party applications can't provide indexers.
- Instead, let indexers expose documents for indexing.
- Not application-oriented.
- All the indexers live in search/ right now, which isn't the right organization in an application-orietned view of the world.
- Instead, move indexers to applications and load them with SymbolLoader.
Test Plan:
- `bin/search index`
- Indexed one revision, one task.
- Indexed `--type TASK`, `--type DREV`, etc., for all types.
- Indexed `--all`.
- Added the word "saboteur" to a revision, task, wiki page, and question and then searched for it.
- Creating users is a pain; searched for a user after indexing.
- Creating commits is a pain; searched for a commit after indexing.
- Mocks aren't currently loadable in the result view, so their indexing is moot.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: 20after4, aran
Maniphest Tasks: T1991, T2104
Differential Revision: https://secure.phabricator.com/D4261
Summary:
- Original command is in SSH_ORIGINAL_COMMAND, not normal argv.
- Use PhutilShellLexer to parse it.
- Fix a protocol encoding issue with ConduitSSHWorkflow. I think I'm going to make this protocol accept multiple commands anyway because SSH pipes are crazy expensive to build (even locally, they're ~300ms).
Test Plan: With other changes, successfully executed "arc list --conduit-uri=ssh://localhost:2222".
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T550
Differential Revision: https://secure.phabricator.com/D4232
Summary:
- Build "sshd-auth" (for authentication) and "sshd-exec" (for command execution) binaries. These are callable by "sshd-vcs", located [[https://github.com/epriestley/sshd-vcs | in my account on GitHub]]. They are based on precursors [[https://github.com/epriestley/sshd-vcs-glue | here on GitHub]] which I deployed for TenXer about a year ago, so I have some confidence they at least basically work.
- The problem this solves is that normally every user would need an account on a machine to connect to it, and/or their public keys would all need to be listed in `~/.authorized_keys`. This is a big pain in most installs. Software like Gitosis/Gitolite solve this problem by giving you an easy way to add public keys to `~/.authorized_keys`, but this is pretty gross.
- Roughly, instead of looking in `~/.authorized_keys` when a user connects, the patched sshd instead runs `echo <public key> | sshd-auth`. The `sshd-auth` script looks up the public key and authorizes the matching user, if they exist. It also forces sshd to run `sshd-exec` instead of a normal shell.
- `sshd-exec` receives the authenticated user and any command which was passed to ssh (like `git receive-pack`) and can route them appropriately.
- Overall, this permits a single account to be set up on a server which all Phabricator users can connect to without any extra work, and which can safely execute commands and apply appropriate permissions, and disable users when they are disabled in Phabricator and all that stuff.
- Build out "sshd-exec" to do more thorough checks and setup, and delegate command execution to Workflows (they now exist, and did not when I originally built this stuff).
- Convert @btrahan's conduit API script into a workflow and slightly simplify it (ConduitCall did not exist at the time it was written).
The next steps here on the Repository side are to implement Workflows for Git, SVN and HG wire protocols. These will mostly just proxy the protocols, but also need to enforce permissions. So the approach will basically be:
- Implement workflows for stuff like `git receive-pack`.
- These workflows will implement enough of the underlying protocol to determine what resource the user is trying to access, and whether they want to read or write it.
- They'll then do a permissons check, and kick the user out if they don't have permission to do whatever they are trying to do.
- If the user does have permission, we just proxy the rest of the transaction.
Next steps on the Conduit side are more simple:
- Make ConduitClient understand "ssh://" URLs.
Test Plan: Ran `sshd-exec --phabricator-ssh-user epriestley conduit differential.query`, etc. This will get a more comprehensive test once I set up sshd-vcs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T550
Differential Revision: https://secure.phabricator.com/D4229
Summary:
This is very preliminary and doesn't actually do anything useful. In theory, it uses Drydock to check out a working copy and run tests. In practice, it's not actually capable of running any of our tests (because of complicated interdependency stuff), but does check out a working copy and //try// to run tests there.
Adds various sorts of utility methods to various things as well.
Test Plan: Ran `reparse.php --harbormaster --trace <commit>`, observed attempt to run tests via Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015, T1049
Differential Revision: https://secure.phabricator.com/D4215
Summary:
Modernizes file uploads. In particular:
- Adds a mobile menu, with an "Upload File" item.
- Adds crumbs to the list view, detail view and upload view.
- Adds "Upload File" action to crumbs.
- Moves upload file to a separate page.
- Removes the combined upload file + recent files page.
- Makes upload file use a normal file control by default (works on mobile).
- Home page, file list and file upload page are now global drop targets which accept files dropped anywhere on them. Dragging a file into the window shows a mask and an instructional message.
- User education on this is a little weak but I think that's a big can of worms?
- Fixes a bug where dropping multiple files into a Remarkup text area produced bad results (resolves T2190).
T879 is related, although it's specifically about Maniphest. I've declined to make global drop targets yet there because there are multiple drop targets on the page with different meanings. That UI needs updating in general.
@chad, do we have an "upload" icon (counterpart to "download")?
Test Plan: Uploaded files in Maniphest, Differential, Files, and from Home. Dragged and dropped multiple files into Differential. Used crumbs, mobile.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2190
Differential Revision: https://secure.phabricator.com/D4200
Summary: Permit the forcible release of Drydock leases. The implementation isn't very exciting for now.
Test Plan: Released leases via web and CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4181
Summary:
Issues here:
- Need an application-sized "eye", or a "home" icon for "Phabricator Home".
- Some of the "apps_lb_2x" sliced images are the "_dark_" versions, not the light versions.
- If you slice an application-sized "logout" (power off) icon and application-sized "help" (questionmark in circle) icon I can replace the current menu icons and nearly get rid of "autosprite".
- To replace the icons on /applications/, the non-retina size is "4x", so we'd need "8x" for retina. Alternatively I can reduce the icon sizes by 50%.
- The "Help", "Settings" and "Logout" items currently have a "glowing" hover state, which needs a variant (or we can drop it).
- The /applications/ icons have a white hover state (or we can drop it).
- The 1x application (14x14) icons aren't used anywhere right now, should they be? Maybe in the feed in the future, etc?
- The "apps-2x" and "apps-large" sheets are the same image, but getting them to actually use the same file is a bit tricky, so I just left them separate for now.
Test Plan:
{F26698}
{F26699}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4108
Summary: Do we have an icon with 2x for the right menu?
Test Plan: {F26590}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4101
Summary:
This doesn't lay in everything, but:
- Break the buttons gradient apart into components and rebuild it (along with other gradients) into a single gradient sprite (possible after {D4099}).
- Use the sliced gradient for the crumbs background.
- Use the sliced image for the crumb divider.
- Adds the black/white app sheets, but I'm not generating them quite yet.
Test Plan: {F26537} {F26540}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4100
Summary:
Add a basic breadcrumbs element, and implement it in Paste.
This needs some polish but is most of the way there.
Test Plan:
{F26443}
{F26444}
{F26445}
(This element is not visible on devices.)
Reviewers: chad
Reviewed By: chad
CC: aran, btrahan
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4087
Summary: I need to run this in `xargs`.
Test Plan:
$ echo 'E' | xargs -n 1 ./reparse.php --message --all
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4094
Summary: Switch to the final versions of these
Test Plan: Will add screenshots...
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4032
Summary:
A bunch of various fixes for the RHEL install script.
Most of them are stylistic, one of them fixes the EPEL repo release
RPM URL for RHEL 5. (enough acronyms there?)
Test Plan:
Tried installing on Fedora (which is treated as RHEL 6 due to how we handle
being unable to find version in the script).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4038
Summary: This does nothing fancy, just closes the resource and releases/breaks leases. They'll get cleaned up in some to-be-written GC process.
Test Plan: Closed resources from web UI and CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3998
Summary:
- The filesystem is now the authority for which sprites are available. If you add new icons, the generation process will pick them up.
- I broke out icon generation and added retina support. App icon generation still uses the old method.
- Update ActionList and RemarkupControl to use the new sheet.
- Use white icons on hover.
- Also fixed a couple of minor issues with some stuff in Firefox/Chrome.
Test Plan:
{F25750}
{F25751}
{F25752}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4027
Summary:
- Since we'll never serve these directly, move them to resources/. This makes generating the Celerity map faster and reduces the size of the result map, since we don't need to analyze resources we'll never serve.
- Also Rename the 2x `subscribe-remove` to `subscribe-delete` since they were named inconsistently. Everything else is in good shape.
Test Plan: Generated sprites as per D4025
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4026
Summary: These are a bit out of date; bundle things together better.
Test Plan: Viewed page source for home, differential list, differential diff, maniphest list, maniphest task. Verified reasonable resource packaging.
Reviewers: chad, vrana, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4002
Summary: This saves lint errors to the path change of current commit. It requires pushed revision. It doesn't save difference from previous commit mentioned in T2038#comment-4 - I don't plan doing it after all, everything would be much more complicated and the amount of data saved with this approach isn't that bad.
Test Plan: Applied patch, ran script, verified DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2038
Differential Revision: https://secure.phabricator.com/D3899
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary: Add a bin/drydock symlink and break it into workflows. Nothing too special here.
Test Plan: Ran `bin/drydock wait-for-lease`, `bin/drydock lease`, `bin/drydock help`, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3867
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: Add an Application class for Drydock and move routing rules there.
Test Plan: Looked at /applications/, clicked around drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3847
Summary: fancy title. really just make the delete() method aware of related objects and build a quick workflow which calls delete(). also make commit delete savvy about audit requests.
Test Plan: deleted a repository per the instructions given to me in the web UI
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1416, T1958, T1372
Differential Revision: https://secure.phabricator.com/D3822
Summary: Quora requested this (moving to S3) but it's also clearly a good idea.
Test Plan:
Ran with various valid/invalid options to test options. Error/sanity checking seemed OK.
Migrated individual local files.
Migrated all my local files back and forth between engines several times.
Uploaded some new files.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1950
Differential Revision: https://secure.phabricator.com/D3808
Summary:
Make the example page a little more useful by showing available icons.
Also replace the "new" image, it had a little arrow which I thought was a "+". Use the one with a "+".
Test Plan: {F21966}
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3794
Summary: Generate a gunsights stylesheet entry for use in Releeph.
Test Plan: None!
Reviewers: edward
Reviewed By: edward
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3773
Summary:
- Better icons and action order.
- "Move Post" action.
- (Bugfix) Allow multiple blogs to be set to not having custom domains.
- Make "Write Post" skip the "select a blog" step when coming from a blog view.
- Sort blog list on "Write Post".
- Show messages when a post is a draft or not on a blog.
Test Plan: Created posts, blogs, moved posts, preview/live'd posts, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3708
Summary:
Cleans up some of the mess I made in D3694. Basically:
- All blogs have an "internal" view with posts that uses mobile-friendly UIs, etc., so we don't have to do as much work with skins -- they just have to look pretty.
- Blogs now have a separate "live" view that we use to handle domains / skins.
- Simplified some views and use IDs in some URLs for consistency.
- Delete a bunch of edge/blogger/multi-blog code that's now obsolete.
Test Plan: Will attach screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3695
Summary:
- I made a "?" icon for help/reference.
- The `<>` icon was slightly too wide so I carved it down to 14x14.
- All the icons are in `/Phabriactor/remarkup_icon_sources.psd` if you want to tweak anything.
- Tooltips don't look like the mock but I'll tackle those separately.
- Removed strikethrough.
- Removed tag/image/text size for now since they don't have reasonable JS implementations yet.
- I think everything else is accurate to the mock.
Test Plan:
Normal state:
{F20621, size=full}
Hover + Click states:
{F20622, size=full}
Clicked state:
{F20620, size=full}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1848
Differential Revision: https://secure.phabricator.com/D3650
Summary: @chad, can you do the icon sheets based on 1.6? We're using a few icons not present in 1.5. I put the 1.6 "pro" source on Dropbox.
Test Plan:
Nav hover and selected states:
{F20598}
Launch hover state:
{F20596}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1856
Differential Revision: https://secure.phabricator.com/D3649
Summary: I needed to figure out how to do this, and it took a couple of minutes.
Test Plan: ran that command on my Ubuntu 12.04 system
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3479
Summary:
Basic infrastructure for generalizing subscriptions/CCs for T1808, T1514 and T1663.
- Implement `PhabricatorSubscribableInterface` and you'll get a subscribe/unsubscribe button for free.
- If there are any auto-subscribed users (like the question author) you can specify them; this makes more sense for Tasks and Revisions than Ponder probably, but maybe the author should be auto-subscribed.
- Subscriptions are either "explicit" (the user clicked 'subscribe') or "implicit" (the user did something which causes them to become subscribed naturally). If a user unsubscribes, they'll no longer be added by implicit subscriptions. This may or may not be relevant to Ponder but is an existing Herald feature in Differential.
- Helper method on PhabricatorSubscribersQuery to load subscribers.
- This doesn't handle actually sending email, etc. I think that's all so application-specific that it doesn't belong here.
- Now seems to work.
Test Plan:
{F20552}
{F20553}
Reviewers: pieter, btrahan
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1663, T1514, T1808
Differential Revision: https://secure.phabricator.com/D3637
Summary:
This is mostly to unblock D3547.
- Move "Macros" to a first-class application called "Macros".
- After D3547, this application will also house "Memes" (macros with text on them).
- This will also make them easier to find; the top navigational query I field is "where are image macros?" nowadays, since it's not intuitive they're part of files.
- This makes some of the UI mobile-aware but doesn't set the `device` flag yet, since there are still some missing pieces.
- I'll separate storage out and continue modernizing the UI as we unblock and integrate D3547.
Test Plan: Created, edited and deleted macros. Viewed files.
Reviewers: btrahan, vrana, teisenbe
Reviewed By: vrana
CC: aran
Maniphest Tasks: T175
Differential Revision: https://secure.phabricator.com/D3572
Test Plan: I wish I could tell that I ran it but I don't have the PNG files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3582
Summary:
I was running the generate_ctags_symbols script on a project, and some
combination of this script and ctags was generating invalid rows for this
script. It's nice if this script can ignore invalid input instead of having
to add another step to filter out invalid input.
Test Plan: run script with input that has some invalid lines
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3532
Summary:
We have two troubles with this script:
# Our revisions and commits don't fit in the memory. (Our tasks do :-).)
# Reindexing revisions is slow.
Test Plan: Ran it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3483
Test Plan:
Built a DB provider using readonly connection for 'r' mode. Then:
$ arc unit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3484
Summary:
- Get rid of an AphrontSideNavView callsite.
- Modernize and simplify the application implementation.
- Doesn't work perfectly on tablet/phone but that's because not all the UI examples work there yet.
Test Plan: Looked at /applications/ and /uiexample/.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3431
Summary: the former is self explanatory. the latter is necessary for installations that require email verification. since many system agents are given bogus email address there can become a problem where these accounts can't be verified
Test Plan: created system agent account from scratch. edited user and toggled system agent accountness. created system agent with unverified email address and verified it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1656
Differential Revision: https://secure.phabricator.com/D3401
Summary:
This does a few things:
- Allows you to flag pastes. This is straightforward.
- Allows Applications to register event listeners.
- Makes object action lists emit a 'didrenderactions' event, so other applications can add more actions. The Flags application injects its action in this way. This should generally make it much easier to add actions to objects when we add new applications, with less code duplication and better modularity. We have a really hacky version of this in Differential that I want to get rid of in lieu of this more general approach. I'm going to make object lists do the same thing, so any application can jump in and add stuff.
Test Plan: Flagged and unflagged pastes. Viewed home page, differential, flags list.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3377
Summary: Permits the name and langauge of a paste to be edited. This will eventually allow the visibility policy to be edited as well.
Test Plan: Edited name/langauge of some pastes. Tried to edit a paste I didn't own, was harshly rebuffed.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1690
Differential Revision: https://secure.phabricator.com/D3376
Summary:
Adds a flexible navigation menu to diffs that shows you your current position in the diff.
Anticipating some "this is the best thing ever" and some "this is the wosrt thing ever" on this, but let's see how much pushback we get? It seems pretty good to me.
Test Plan: Will attach screenshots.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1633, T1591
Differential Revision: https://secure.phabricator.com/D3355
Summary:
This is another experiment for reducing reviewers response time.
I stole the idea (and colors) from [[ http://www.reviewboard.org/media/screenshots/2009/02/02/dashboard.png | ReviewBoard ]].
I actually quite like it (except when everything is red) and I can image that people will review just to have better color balance.
The code is not production ready for these reasons:
- We load holidays again and again for each revision. I couldn't cache it to static variable because it could persist multiple requests, right?
- I don't know how to expand height to the whole cell (I'm really bad in CSS).
- CSS rules are probably in wrong file.
- We probably want to use different colors.
This is how it looks:
{F16406}
Test Plan: Displayed revision list.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3190
Summary:
- Fix width, corresponding to wider sprites.
- Sprite the "Audit" icon.
- Mark the meta-application as device-ready.
- Fix some collapse/expand bugs with the draggable local navs.
- Add texture to local nav.
- Darken the application nav to make it more cohesive with the main nav. I think this is an improvement?
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran, netfoxcity
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3338
Summary:
For Nefarious Facebook Internal Purposes, which may or may not
include incremental symbol database updates.
Give the import script an option to not clear all symbols from the
project, and make a new script that clears only symbols from paths given
on stdin.
(I'm not yet sure how much of the NFIPs is going to be ported over
here. So there might be a future diff that uses this. Conversely,
since there's no real use case out here, I'm fine just moving this to
the Facebook configuration if necessary.)
Test Plan: Run scripts in innumerable bizarre and eldritch configurations.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3305
Summary:
- Add a PhabricatorApplication.
- Make most of the views work well on tablets / phones. The actual "Create" form doesn't, but everything else is good -- need to make device-friendly form layouts before I can do the form.
Test Plan: Will attach screenshots.
Reviewers: btrahan, chad, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3293
Summary:
See D3277, D3278.
- Sprite all the menu icons.
- Delete the unsprited versions.
- Notification bolt now uses the same style as everything else.
Test Plan: Looked at page, hovered, clicked things.
Reviewers: btrahan, chad, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3279
Summary: This probably needs some tweaks, but gets the point across. I'll lay in the actual usage in the next diff.
Test Plan: Looked at generated CSS/PNG.
Reviewers: btrahan, chad, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3278
Summary:
Update how arguments get parsed in reparse.php and add two new options
--force-local and --min-date (both to be used with --all). This diff also
fixes a bug in destroy_revision.php
Test Plan: ran the script
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3275
Summary: we had a hole in scaling pics from oauth from a bit. that was patched in D2848. this cleans up the old data.
Test Plan: ran it in production. issue as described on task is resolved. also spot checked some profiles and they look good.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1634
Differential Revision: https://secure.phabricator.com/D3268
Summary: See D3252.
Test Plan: This one is nasty to test, I'm going to make some coffee first.
Reviewers: davidreuss, vrana, btrahan
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T452
Differential Revision: https://secure.phabricator.com/D3254
Summary:
We can use `.gitattributes` instead but there's no way how to set repository config for all users in Git, right?
So provide a script writting to `.git/info/attributes` instead so that we don't have to .gitignore `.gitattributes`.
Test Plan:
$ scripts/celerity/install_merge.sh
$ git pull # with merge conflict in Celerity map
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3228
Summary:
Scripts now return scoped symbols -- in particular, PHP class constants, fields, and methods. ctags gives some for other languages.
(Turns out XHPAST doesn't support traits. But no one uses traits anyway so it's probably fine.)
I couldn't find a list of the context types ctags uses (class/struct/union/enum/maybe others?), so the context code just ignores that. Also, it uses a blacklist for the symbol type instead of a whitelist because there are a ton, they vary by language, and I didn't want to unintentionally exclude anything (P480).
Test Plan: Scrape symbols from arcanist and phabricator. Upload them to sandbox. Search for things.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3202
Summary:
- import_project_symbols supports an optional extra field, which is the
context of the symbol.
- Symbol query can take a symbol argument, either as a parameter or a
URL component (so you can now jump nav to `s Zerg/rush`, for
example).
- Conduit method not yet updated. Will do that later.
NOTE: Not providing a context is distinct from providing an empty
context, because an empty context stands for top-level context, i.e.
functions and classes for PHP. It will not find class methods, etc. It
is possible that we should use some weird token that could not normally
be a context name to stand in for empty context.
Test Plan: Do a bunch of symbol searches.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3148
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
- Add PhabricatorApplication. This is a general class that I have grand designs for, but used here to allow applications to provide objects for analysis by the facts appliction.
- Add FactCursors, to keep track of where iterators are.
- Make the daemon do something sort of useful.
- Add `bin/fact cursors` for showing and managing objects and cursors.
- Add some options to `bin/fact analyze`.
Test Plan:
- `bin/fact cursors`, `bin/fact cursors --reset DifferentialRevision`, `bin/fact cursors --reset X`
- `bin/fact analyze`, `bin/fact analyze --all`, `bin/fact analyze --iterator DifferentialRevision --skip-aggregates`
- `bin/phd debug fact`
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3098
Summary:
Basic "Fact" application with some storage, part of a daemon, and a control binary.
= Goals =
The general idea is that we have various statistics we'd like to compute, like the frequency of image macros, reviewer responsiveness, task close rates, etc. Computing these on page load is expensive and messy. By building an ETL pipeline and running it in a daemon, we can precompute statistics and just pull them out of "stats" tables.
One way to do this is just to completely hard-code everything, e.g. have a daemon that runs every hour which issues a big-ass query and dumps results into a table per-fact or per fact-group. But this has a bunch of drawbacks: adding new stuff to the pipeline is a pain, various fact aggregators can't share much code, updates are slow and expensive, we can never build generic graphs on top of it, etc.
I'm hoping to build an ETL pipeline which is generic enough that we can use it for most things we're interested in without needing schema changes, and so that installs can use it also without needing schema changes, while still being specific enough that it's fast and we can build useful stuff on top of it. I'm not sure if this will actually work, but it would be cool if it does so I'm starting pretty generally and we'll see how far I get. I haven't built this exact sort of thing before so I might be way off.
I'm basing the whole thing on analyzing entire objects, not analyzing changes to objects. So each part of the pipeline is handed an object and told "analyze this", not handed a change. It pretty much deletes all the old data about that thing and then writes new data. I think this is simpler to implement and understand, and it protects us from all sorts of weird issues where we end up with some kind of garbage in the DB and have to wipe the whole thing.
= Facts =
The general idea is that we extract "facts" out of objects, and then the various view interfaces just report those facts. This change has on type of fact, a "raw fact", which is directly derived from an object. These facts are concerete and relate specifically to the object they are derived from. Some examples of such facts might be:
D123 has 9 comments.
D123 uses macro "psyduck" 15 times.
D123 adds 35 lines.
D123 has 5 files.
D123 has 1 object.
D123 has 1 object of type "DREV".
D123 was created at epoch timestamp 89812351235.
D123 was accepted by @alincoln at epoch timestamp 8397981839.
The fact storage looks like this:
<factType, objectPHID, objectA, valueX, valueY, epoch>
Currently, we supprot one optional secondary key (like a user PHID or macro PHID), two optional integer values, and an optional timestamp. We might add more later. Each fact type can use these fields if it wants. Some facts use them, others don't. For instance, this diff adds a "N:*" fact, which is just the count of total objects in the system. These facts just look like:
<"N:*", "PHID-xxxx-yyyy", ...>
...where all other fields are ignored. But some of the more complex facts might look like:
<"DREV:accept", "PHID-DREV-xxxx", "PHID-USER-yyyy", ..., ..., nnnn> # User 'yyyy' accepted at epoch 'nnnn'.
<"FILE:macro", "PHID-DREV-xxxx", "PHID-MACR-yyyy", 17, ..., ...> # Object 'xxxx' uses macro 'yyyy' 17 times.
Facts have no uniqueness constraints. For @vrana's reviewer responsiveness stuff, we can insert multiple rows for each reviewer, e.g.
<"DREV:reviewed", "PHID-DREV-xxxx", "PHID-USER-yyyy", nnnn, ..., mmmm> # User 'yyyy' reviewed revision 'xxxx' after 'nnnn' seconds at 'mmmm'.
The second value (valueY) is mostly because we need it if we sample anything (valueX = observed value, valueY = sample rate) but there might be other uses. We might need to add "objectB" at some point too -- currently we can't represent a fact like "User X used macro Y on revision Z", so it would be impossible to compute macro use rates //for a specific user// based on this schema. I think we can start here though and see how far we get.
= Aggregated Facts =
These aren't implemented yet, but the idea is that we can then take the "raw facts" and compute derived/aggregated/rollup facts based on the raw fact table. For example, the "count" fact can be aggregated to arrive at a count of all objects in the system. This stuff will live in a separate table which does have uniqueness constraints, and come in the next diff.
We might need some kind of time series facts too, not sure about that. I think most of our use cases today are covered by raw facts + aggregated facts.
Test Plan: Ran `bin/fact` commands and verified they seemed to do reasonable things.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, majak
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3078
Summary: Currently, MySQL/MySQLi connections store passwords in plain text on the object. Allow them to be stored in PhutilOpaqueEnvelopes instead. See D3053.
Test Plan: Loaded site.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3054
Summary:
See D2991 / T1526. Two major changes here:
- PHP just straight-up logs passwords on ldap_bind() failures. Suppress that with "@" and keep them out of DarkConsole by enabling discard mode.
- Use PhutilOpaqueEnvelope whenever we send a password into a call stack.
Test Plan:
- Created a new account.
- Reset password.
- Changed password.
- Logged in with valid password.
- Tried to login with bad password.
- Changed password via accountadmin.
- Hit various LDAP errors and made sure nothing appears in the logs.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2993
Summary:
- See D2945.
- Drop `cache` field from ManiphestTransaction.
- Render task descriptions and transactions through PhabricatorMarkupEngine.
- Also pull the list of macros more lazily.
Test Plan:
- Verified transactions and transaction preview work correctly and interact with cache correctly.
- Verified tasks descriptions and task preview work correctly.
- Verified we don't hit the imagemacro table when we're rendering everything from cache anymore.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2946
Summary:
binary_safe_diff is needed in arcanist too. Moved it over to
arcanist. See D2915.
Test Plan: diffusion page rendered correctly on binary file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2916
Summary: I broke this when converting to PhabricatorUserEditor.
Test Plan:
Ran `accountadmin`, created an admin account, verified the "new value" column showed "Y".
ACCOUNT SUMMARY
OLD VALUE NEW VALUE
Username derp
Real Name derprp
Email derp@derp.com
Password Unchanged
Admin N Y
Reviewers: btrahan, nikil
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1434
Differential Revision: https://secure.phabricator.com/D2908
Summary:
Nothing new or exciting here yet, just moving the random scripts/repositories/ things to bin/repository. Also add `repository list`.
(Console stuff comes from D2841.)
Test Plan: Ran `repository list`, `repository pull`, `repository discover`, `repository discover --verbose`, `repository help`.
Reviewers: jungejason, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2849
Summary: Add verbose logging. This logging is activated by setting "phd.verbose" in the config, running "phd debug", or explicitly in scripts/repository/pull.php and scripst/repository/discover.php
Test Plan:
>>> orbital ~/devtools/phabricator $ ./scripts/repository/discover.php GTEST
Discovering 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Discovering commits in repository 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '()_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch', at 774c7737b2d560a291697126bf4513204ccf661a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-1', at dc97539bee07293f95990d71f4638335a2531d69.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-2', at 1acfaec313c46dd3caa90448800181fb91b0270f.
Reviewers: jungejason
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2843
Summary: Installs may set global translation which may not be available before loading libraries.
Test Plan:
$ aphrontpath.php /
Reviewers: nh
Reviewed By: nh
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D2819
Summary: loadRunningDaemons loads daemons that may be running (have a file pid). other commands handle this appropriately so just make sure the start command knows whats up
Test Plan: phd start, stop, reload all seemed to work just fine.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1284
Differential Revision: https://secure.phabricator.com/D2808
Summary:
This is the first step in Phabricator internationalization.
It adds a translation selector and calls it at startup.
Installations can add custom selectors to override some texts.
We can add official translations in future.
Next step is to allow user to choose his translation which will override the global one.
This is currently used only for English plurals.
Test Plan: Displayed a diff with unit test error, verified that it says 'Detail' or 'Details' and not 'Detail(s)'.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1139
Differential Revision: https://secure.phabricator.com/D2753
Summary:
- The config is called "resource-path" and the script references "resource-path", but the actual value checked for is "resource-map".
- Use nonempty(), since defaulting with getEnvConfig() will give you null if the setting exists but is set to null. This default is nearly useless so maybe we should change it to use coalesce().
- Remove Celerity map initialization from warmup. We don't currently initialize the environment in warmup, and Celerity initialization now depends on the environment.
Test Plan: Ran patch locally and on FPM-Warmup.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: hsb, aran
Differential Revision: https://secure.phabricator.com/D2662
Summary:
See T1303, which presents a reasonable case for inclusion of these characters in valid usernames.
Also, unify username validity handling.
Test Plan: Created a new user with a valid name. Tried to create a new user with an invalid name. Ran unit tests.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1303
Differential Revision: https://secure.phabricator.com/D2651
Summary:
We have custom static resources.
We currently include them in Phabricator's celerity resource map which is causing some pain - we need to regenerate the file without our custom resources before pushing upstream, we need to discard our changes before pulling from upstream and we need to rebuild with our changes to run Phabricator.
This diff allows writing and reading the map in other location.
The plan is this - I will run `celerity_mapper.php` twice - once to build Phabricator-only resources (to push to upstream) and once to build Phabricator + ours resoruces to put in our directory.
Better solution would be to create a map just with our resources and read and combine it with Phabricator resources.
But it is complicated because we have dependencies on Phabricator resources.
Test Plan:
`celerity_mapper.php webroot`
`celerity_mapper.php webroot ../facebook/src/__celerity_resource_map__.php`
Delete Phabricator's celerity map, set 'celerity.resource-path' and successfully load Phabricator.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T721
Differential Revision: https://secure.phabricator.com/D2630
Summary:
- We currently have some bugs in account creation due to nontransactional user/email editing.
- We save $user, then try to save $email. This may fail for various reasons, commonly because the email isn't unique.
- This leaves us with a $user with no email.
- Also, logging of edits is somewhat inconsistent across various edit mechanisms.
- Move all editing to a `PhabricatorUserEditor` class.
- Handle some broken-data cases more gracefully.
Test Plan:
- Created and edited a user with `accountadmin`.
- Created a user with `add_user.php`
- Created and edited a user with People editor.
- Created a user with OAuth.
- Edited user information via Settings.
- Tried to create an OAuth user with a duplicate email address, got a proper error.
- Tried to create a user via People with a duplicate email address, got a proper error.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: tberman, aran
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2569
Summary:
- Delete an unreachable block of code.
- Pass "--" to terminate overseer args.
Test Plan: Ran "phd repository-launch-readonly", didn't get argument errors out of the daemon.
Reviewers: jungejason
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2456
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary:
See D2418. This merges the commit discovery daemon into the same single daemon, and applies all the same rules to it.
There are relatively few implementation changes, but a few things did change:
- I simplified/improved Mercurial importing, by finding full branch tip hashes with "--debug branches" and using "parents --template {node}" so we don't need to do separate "--debug id" calls.
- Added a new "--not" flag to exclude repositories, since I switched to real arg parsing anyway.
- I removed a web UI notification that you need to restart the daemons, this is no longer true.
- I added a web UI notification that no pull daemon is running on the machine.
NOTE: @makinde, this doesn't change anything from your perspective, but it something breaks this is the likely cause.
This implicitly resolves T792, because discovery no longer runs before pulling.
Test Plan:
- Swapped databases to a fresh install.
- Ran "pulllocal" in debug mode. Verified it correctly does nothing (fixed a minor issue with min() on empty array).
- Added an SVN repository. Verified it cloned and discovered correctly.
- Added a Mercurial repository. Verified it cloned and discovered correctly.
- Added a Git repository. Verified it cloned and discovered correctly.
- Ran with arguments to verify behaviors: "--not MTEST --not STEST", "P --no-discovery", "P".
Reviewers: btrahan, csilvers, Makinde
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T792
Differential Revision: https://secure.phabricator.com/D2430
Summary:
Allow the pull daemon to take a list of repositories. By default, pull all repositories.
Make some effort to respect pull frequencies, although we'll necessarily suffer a bit if running with only one process.
NOTE: We still launch one discovery daemon per working copy, so this only cuts the daemon count in half.
Test Plan:
- Ran `phd debug pulllocal`, verified behavior.
- Ran `pull.php P MTEST SVNTEST --trace`, verified it pulled the repos and ran the right commands.
- Ran `phd repository-launch-master`, verified the right daemons launched, checked daemon console.
- Ran `phd repository-launch-readonly`, verified the right daemon launched, checked daemon console.
Reviewers: btrahan, csilvers, davidreuss
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2418
