Summary: we were calling a member method on a diffusion hash. not sure why. Fixes T4402
Test Plan: clicked about, no fatals and seemed to move sensical backwards in time
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4402
Differential Revision: https://secure.phabricator.com/D8194
Summary:
Ref T156. @vlada recently implemented filename search in Diffusion, this cleans up the UI a little bit:
- Instead of showing one search box with two different buttons, let the submit buttons appear to the right of the text boxes and separate the search modes.
- Clean up the results a little bit (don't show columns which don't exist).
Test Plan: {F107260}
Reviewers: vlada, btrahan, chad
Reviewed By: chad
CC: vlada, chad, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8125
Summary:
Ref T156. Adds basic filename search support for Diffusion,
currently only for Git repositories.
This is preliminary, and it's up for discussion:
- is the UI in the right place;
- what should the search query syntax be (e.g. whether
to put `*`s in the beginning and end of it);
- how to best approach it for Mercurial and/or SVN;
- what's the cleanest result format for `lsquery` (I went
for the minimum necessary change to `DiffusionBrowseSearchController`).
Test Plan:
Browse to a repository in Diffusion, and use both
`Search File Names` and `Search File Content`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8093
Summary: Fixes T4175. In cases where the arguments have only always-safe characters, we can produce a more human-readable URI.
Test Plan: Looked at some repositories.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8100
Summary:
Ref T4175. This allows these URIs to all be valid for Git and Mercurial:
/diffusion/X/
/diffusion/X/anything.git
/diffusion/X/anything/
This mostly already works, it just needed a few tweaks.
Test Plan: Cloned git and hg working copies using HTTP and SSH.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8098
Summary:
Ref T4175.
- Add a configurable name for the clone-as directory, so you can have "Bits & Pieces" clone as "bits~n~pieces/" or simliar.
- By default, use "reasonable" heruistics to choose such a name.
- Generate a copy/pasteable clone commmand with this directory name.
Test Plan: Looked at some repositories.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4175
Differential Revision: https://secure.phabricator.com/D8097
Summary:
Hosted repositories have muddied this distinction somewhat. In some cases, we only want to use the real remote URI, and the call is only relevant for imported repositories.
In other cases, we want the URI we'd plug into `git clone`.
Move this logic into `PhabricatorRepository` and make the distinction more clear.
Test Plan: Viewed SVN, Git, and Mercurial hosted and remote repositories, all the URIs looked reasonable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D8096
Summary:
A few users have hit this and found it confusing. Currently, it means "more than 99.95%", which is very different from "100%". Instead:
- show an extra digit of precision; and
- cap the display at "99.99%", so it's more clear that work is still happening.
Test Plan: Faked it and saw it cap at 99.99%.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8058
Summary: Minor, adds the Callsign and changes to cards view when listing repositories.
Test Plan: Reload sandbox list of repositories, see new items.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8036
Summary: Fixes T3238. Ref T4327. Although the instructions are fairly clear on this, it's easy to miss them. Make sure the root the user enters matches the real root.
Test Plan: Added unit tests. Used `bin/repository discover` to hit the check explicitly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3238, T4327
Differential Revision: https://secure.phabricator.com/D8020
This seems to be a specific of how browsers are dealing with
spaces/tabs. Multiple spaces works just fine, but multiple
tabs were treating as a single space which breaks indentation.
Now made it so tabs are replaced with 4 spaces. Not ideal but
still better than fully unreadable code. This also matches to
how differential is handling tabs.
Ref T2495. See: <https://github.com/facebook/phabricator/issues/487>
Reviewed by: epriestley
Summary:
Ref T4327. This is general cleanup since I was in this area of the code. Primarily, the Mercurial implementation here was completely broken and wrong:
- It returned only one branch, but a commit can be present on many branches.
- It did not account for multiple branch heads.
- It returned a result implying the branch head pointed at the queried commit, which is no consistent or accurate.
Simplify the amount of API we're dealing with by collapsing this method into the very similar `diffusion.branchquery` method.
Test Plan: Looked at mercurial and git repositories and commits, branch information seemed correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8003
Summary: Ref T4327. At some point these two very similar classes got introduced. Collapse `DiffusionBranchInformation` into the nearly identical `DiffusionRepositoryRef`, which enjoys slightly more generality and support.
Test Plan: Viewed branch overview and detail pages. Ran `repository refs` and `repository discover`. Grepped for removed symbols.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8002
Summary:
Ref T4327. Simplify the git discovery process so I can move it to the DiscoveryEngine, so I can make change parsing testable.
In particular:
- As an optimization, we process closeable branches ("master") first, then process uncloseable branches ("epriestley-devel"). This means that in the common case we can insert a commit as closeable immediately when it is discovered, the first pass through the pipeline will get it right, and the "ref update" step will never need to do any meaningful work.
- Commits which do not initially appear on a closeable branch, but later move to one (via merges or ref moves) will now be caught in the ref update step, have the closeable flag set, and have a message step re-queued.
- We no longer need to do a separate discovery step on closable branches.
- We no longer need to keep track of `seenOnBranches`.
Test Plan: Ran discovery on repositories after pushing commits, got reasonable results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D7985
Summary: Fixes T3857. Earlier work made this trivial and just left product questions, which I've answered by requiring the daemons to run on reasonable installs.
Test Plan: Ran `bin/search index` and `bin/search index --background`. Observed indexes write in the former case and tasks queue in the latter case. Commented with a unique string on a revision and searched for it a moment later, got exactly one result (that revision), verifying that reindexing works correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7966
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: Two basic changes here, first we fixed up the Diffusion headers to roll out more PHUIObjectBoxes. Second we added some specific styles for when Errors are inside an ObjectBox at the first position.
Test Plan: Tested a number of different layouts for browsing respositories as well as wherever I could find cases with PHUIObjectBox Form Errors (see images attached). Still some minor tightening due after this diff, but didnt want to overload it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7914
Summary:
Updates table design to use new standards, work well in PHUIObjectBox. Fixes T4142
Comma
Test Plan: Tested on Diffusion, Settings, will roll out to more places soon
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4142
Differential Revision: https://secure.phabricator.com/D7901
Summary: Ref T4264. Ref T2628. Ref T3102. Allows you to associate repositories with projects. In the future, you'll be able to write Herald object rules against projects, use Herald fields like "Repository's projects", and search by project.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3102, T4264, T2628
Differential Revision: https://secure.phabricator.com/D7881
Summary:
Repositories currently have a no-UI "shortcut" feature which is only used by Facebook (and I'm not sure it's even used). As implemented, this feature is policy-oblivious and kind of nonsensical. Throw it away.
I'm open to reimplementing this, but I want to see some level of interest in it before I do. The new implementation would add shortcuts to each repository, similar to how mirrors work. My original plan was to follow this up with such an implementation (it's half-implemented in my sandbox), but as I worked through it I'm not sure it's really valuable.
Test Plan: Browsed repository list, grep.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Differential Revision: https://secure.phabricator.com/D7862
Summary:
Fixes T4242. It's currently possible to set nonsense defaults and create repositories with unintended policies, because policy configuration isn't part of creation. Instead:
- put a policy page into the creation workflow;
- require the selection of valid policies (i.e., prevent creating a repository you can't view / edit).
Test Plan:
- Created imported and hosted repositories, hit policy selection.
- Edited policies of existing repositories.
- Tried to set nonsense policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4242
Differential Revision: https://secure.phabricator.com/D7856
Summary: Some discussion on IRC. This is more consistent with other disabled items, which are click-to-explain.
Test Plan: Viewed UI, clicked link.
Reviewers: btrahan, dctrwatson, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7857
Summary:
Fixes T4270. When you download raw file content, diffs, and patches we currently give them default (all users) visibility.
Instead, bind them to the repository or revision in question.
(This code could use a bit of cleanup at some point.)
Test Plan: Hit the patch and content download links in Diffusion and the patch download link in Differential, got restricted files with accurate policy bindings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4270
Differential Revision: https://secure.phabricator.com/D7849
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary:
There's no particular reason to allow the user to edit the clone URI field in Diffusion; editing it has no meaning and if you fat finger the keyboard, it's quite possible that the user will either accidentally clear and/or modify the URI before copying (bit me this morning).
Adding a readonly attribute to the input field allows the same benefit (URI is easily selectable) while preventing such accidental input. Fixes T4246.
Test Plan: Verified that the desired behavior is present in both Chrome, Safari, and Firefox. Field remains selectable with one click, but field is not editable.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4246
Differential Revision: https://secure.phabricator.com/D7810
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
Ref T4195. This pulls the central logic of HookEngine up one level and makes all the git stuff genrate PushLogs.
In future diffs, everything will generate PushLogs and we can hand those off to Herald.
Test Plan:
Pushed a pile of valid/invalid stuff:
{F89256}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7761
Summary: We run `git` on a different port than 22, so would like to reflect this change in the UI.
Test Plan: Set diffusion.ssh-port in settings, then make sure it's reflected on the Diffusion repository Clone URI.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7755
Summary: This locks push logs down a little bit and makes them slightly more administrative. Primarily, don't show IPs to googlebot, etc.
Test Plan: Viewed push logs as edit and non-edit users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7722
Summary:
Ref T4195. Like the previous diffs, these both create a useful log and give us an object to hand off to Herald.
Surface this information in Diffusion, too, and clean things up a little bit.
Test Plan: {F87565}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7718
Summary: Ref T4195. Add UI options to filter push logs by pusher and repository. Add a link from the repository view page to the push logs.
Test Plan: Viewed a hosted repository, clicked logs link, saw logs. Filtered lgos by repo/pusher.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7713
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary: This was broken in rP51fb1ca16d7f.
Test Plan: Imported a repository with file:/// location, it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7636
Summary: Fixes T2230. This isn't a total walk in the park to configure, but should work for early adopters now.
Test Plan: Read documentation, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7634
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
Ref T4039. This fixes an issue where a user with the ability to create repositories could view repositories he is otherwise not permitted to see, by following these steps:
- Suppose you want to see repository "A".
- Create a repository with the same VCS, called "B".
- Edit the local path, changing "/var/repo/B" to "/var/repo/A".
- Now it points at a working copy of a repository you can't see.
- Although you won't be able to make it through discovery (the pull will fail with the wrong credentials), you can read some information out of the repository directly through the Diffusion UI, probably?
I'm not sure this was really practical to execute since there are a bunch of sanity checks along most/all of the major pathways, but lock it down since normal users shouldn't be editing it anyway. In the best case, this would make a mess.
Test Plan: {F81391}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7580
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary: We don't actually support this yet, so hide the configuration.
Test Plan: Edited branches for an hg repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7563
Summary:
Ref T2230. As far as I can tell, getting SVN working over HTTP is incredibly complicated. It's all DAV-based and doesn't appear to have any kind of binary we can just execute and pass requests through to. Don't support it for now.
- Disable it in the UI.
- Make sure all the error messages are reasonable.
Test Plan: Tried to HTTP an SVN repo. Tried to clone a Git repo with SVN, got a good error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7562
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: Ref T2230. Fixes T4079. As it turns out, this is Git being weird. See comments for some detials about what's going on here.
Test Plan: Created shallow and deep Git clones.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4079, T2230
Differential Revision: https://secure.phabricator.com/D7554
Summary:
Fixes T4067. The way `DiffusionCommitQuery` works prevents it from loading SVN identifiers in some cases without additional constraints, since "12345" might be an SVN revision 12345, or it might be the first 5 characters of a Git commit hash.
Introduce `withRepository()` as a shorthand for `withDefaultRepository()` + `withRepositoryIDs()`. This tells the query to:
- Only look in the given repository; and
- use the more liberal identifier resolution rules while doing so.
The practical impact this has is that blame tooltips in SVN work again. The other queries which are fixed here were never run in SVN (which doesn't have first-class branches or tags); I've cleaned them up only for completeness.
Test Plan:
- Viewed blame in SVN, saw information again instead of empty tooltip.
- Viewed brnaches/tags in Mercurial and Git.
{F79226}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4067
Differential Revision: https://secure.phabricator.com/D7523
Summary: Ref T2230. This is easily the worst thing I've had to write in a while. I'll leave some notes inline.
Test Plan: Ran `hg clone http://...` on a hosted repo. Ran `hg push` on the same. Changed sync'd both ways.
Reviewers: asherkin, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7520
Summary: This is starting to get a bit sizable and it turns out Mercurial is sort of a beast, so split the VCS serve stuff into a separate controller.
Test Plan: Pushed and pulled an authenticated Git repository.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Differential Revision: https://secure.phabricator.com/D7494
Summary:
Expands on D7488, which looks way better than the config checks. I'm leaving the config checks for now, but maybe we should just get rid of them? This advice is delivered in a far more timely way.
- Check for normal VCS binaries too.
- Link to `environment.append-paths`.
- Get rid of untranslated names (I think they're probably not too useful?)
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7495
Summary:
Currently if 'git-http-backend' is not on the PATH, there is no visible message to the user other than "info/refs: is this a valid git repository?" when trying to clone. This adds a setup check so that if there are any Git repositories in use, it will check for the existance of the "git-http-backend" binary in the PATH.
I believe this is shipped by default alongside the git package on most distros, but in some (such as OpenSUSE), this binary isn't on the PATH by default.
Test Plan: Removed `/usr/lib/git` from my `environment.append-paths` and saw the message appear. Added it back and the message went away.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4050
Differential Revision: https://secure.phabricator.com/D7488
Summary: Fixes the junk I broke in D7484. Before that, tag content was a side effect of resolving the ref name. Now, fetch it explicitly in `diffusion.tagsquery`.
Test Plan: Looked at a tag, saw the annotation/message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7485
Summary: Adds summary (description) and test plan icons to make these area's more unique and differentiated over general sections.
Test Plan: Test a diff, a commit, a task
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7493
Summary: This disables CSRF checking around the `$repository->writeStatusMessage` so that pushing changes over HTTP to Git repositories doesn't fail miserably.
Test Plan: Applied this fix and I could `git push` to hosted repositories again.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4052
Differential Revision: https://secure.phabricator.com/D7490
Summary: This fixes an issue where Git authentication would always fail on an install with `policy.allow-public` set to false. This is because when public access is allowed, anonymous users can query the user list. However, when public access is not allowed, you have to be authenticated before you can read any of the user objects.
Test Plan:
Prior to this fix, I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
fatal: unable to access 'http://phabricator.local/diffusion/TEST/': The requested URL returned error: 403
```
when `policy.allow-public` is false. After this fix I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
remote: Counting objects: 102, done.
remote: Compressing objects: 100% (71/71), done.
remote: Total 102 (delta 6), reused 0 (delta 0)
Receiving objects: 100% (102/102), 9.89 KiB | 0 bytes/s, done.
Resolving deltas: 100% (6/6), done.
Checking connectivity... done
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4049
Differential Revision: https://secure.phabricator.com/D7489
Summary:
Ref T2230. This will need some more refinement, but basically it adds a "Create" vs "Import" step before we go through the paged workflow.
- If you choose "Create", we skip the remote URI / auth stuff, and then set the "hosted" flag.
- If you choose "Import", we do what we do now.
Test Plan: Created and imported repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7475
Summary:
- Warn about "Read/Write" instead of disabling it, to prevent edits which mutate it after changing a hosted repository to an unhosted one.
- Warn about authenticated connections with HTTPS auth disabled, and link to the relevant setting.
- When "Autoclose" is disabled, show that "Autoclose Branches" won't have an effect.
- For hosted repositories, show the HTTP and SSH clone URIs.
- Make them easy to copy/paste.
- Link to credential management.
- Show if they're read-only.
- This could be a bit nicer-looking than it is.
Test Plan: Looked at repositories in a bunch of states and made various edits to them.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7471
Summary: Depends on D7642. This updates the authentication logic so that HTTP writes can be made to Git repositories hosted by Phabricator.
Test Plan: Set the policy to allow me to push and I was able to. Changed the policy to disallow push and I was no longer able to push.
Reviewers: #blessed_reviewers, hach-que
Reviewed By: hach-que
CC: Korvin, epriestley, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7468
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary:
Replace the blanket "daemons not running" warning with a lot more specific detail, to try to make it easier for users to figure out how to set up repositories correctly.
The next change here will add some additional status information from the daemons, so this panel can report results in greater detail.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7458
Summary:
- Use DiffusionCommitQuery
- Get rid of the "Author" column.
- Collapse commit + revision together.
- Better tooltips to cover for the removed information.
- Colorize only the "line" column.
- Generally, reduce the amount of visual noise and non-code-stuff going on in this interface.
- I'd like to make the "<<" thing look nicer too but that might take some actual design.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7457
Summary: Minor cleanup. Make the "imported" check less strict (we don't need owners or herald to show change status). Export the "imported" flag over Conduit.
Test Plan: Viewed tag table. Viewed partially imported repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7455
Summary: Swap to DiffusionCommitQuery, other minor cleanup.
Test Plan: Viewed page, forced error view and looked at it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7454
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: The warning panel on large commits in diffusion was being overrun with other styles. Fixes T3952
Test Plan: test on a large commit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7456
Summary: We don't have a section header on `/diffusion/X/` for descriptions right now. Add one to improve consistency.
Test Plan: Looked at a repository.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7449
Summary:
Fixes T3619. These URIs are valid:
git@domain.com:/path (Git SCP-style implicit SSH)
ssh://git@domain.com/path (Explicit SSH)
This URI, arrived at by adding "ssh://" to the front of an SCP-style URI, is not:
ssh://git@domain.com:/path
Detect URIs in this form and reject them. See T3619.
Test Plan:
{F75486}
Also set some valid URIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3619
Differential Revision: https://secure.phabricator.com/D7431
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
Fixes T3217. Ref T776. Ref T1493. Broadly, this introduces a mechanism which works like this:
- When a repository is created, we set an "importing" flag.
- After discovery completes, we check if a repository has no importing commits. Basically, this is the first time we catch up to HEAD.
- If we're caught up, clear the "importing" flag.
This flag lets us fix some issues:
- T3217. Currently, when you import a new repository and users have rules like "Email me on every commit ever" or "trigger an audit on every commit", we take a bunch of publish actions. Instead, implicitly disable publishing during import.
- An imported but un-pulled repository currently has an incomprehensible error on `/diffusion/X/`. Fix that.
- Show more cues in the UI about importing.
- Made some exceptions more specific.
Test Plan:
This is the new screen for a completely new repo, replacing a giant exception:
{F75443}
- Created a repository, saw it "importing".
- Pulled and discovered it.
- Processed its commits.
- Ran discovery again, saw import flag clear.
- Also this repository was empty, which hit some of the other code.
This is the new "parsed empty repository" UI, which isn't good, but is less broken:
{F75446}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Maniphest Tasks: T3607, T1493, T776, T3217
Differential Revision: https://secure.phabricator.com/D7429
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary: Mostly ripped from D7391. No writes yet.
Test Plan: Ran `git clone` against a local over HTTP, got a clone.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7423
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary:
Ref T2231. This:
- Activates the new multi-step workflow, and exposes it in the UI.
- Adds "can create", "default view" and "default edit" capabilities.
- Provides a default value for `repository.default-local-path` and forces repositories into it by default. It's still editable, but Phabricator gets it correct (for some definition of correct) by default now.
Test Plan: Created some new repositories with the new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7413
Summary: Ref T2231. This just moves the "Delete" dialog from Repositories to Diffusion. This dialog just shows instructions and isn't interesting.
Test Plan: {F75093}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7412
Summary: Ref T2231. Use status info element instead of tags.
Test Plan: {F75092}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7411
Summary: Fixes T1286. Ref T2231. See previous diffs; same as the others but does "Local Path".
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7409
Summary: Ref T2231. Crumbs in the Diffusion edit workflow are a bit wonky, with stuff like "rP (master)" which isn't very useful and no link back to the main "Edit" page. Make them consistent across all the screens.
Test Plan: Loaded a bunch of these screens and saw sane crumbs on all of them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7407
Summary: Ref T2231. The policy rules are a little murky right now: the "Edit Repository" link requires CAN_EDIT, but the actualy page doesn't. Instead, require CAN_EDIT for the edit page.
Test Plan: As a user without CAN_EDIT, viewed a repository and clicked the edit link.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7406
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Ref T2231. Brings "Notify/Publish" and "Autoclose" to the new UI.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7402
Summary: Ref T603. While policies aren't completely perfect, they are substantially functional to the best of my knowledge -- definitely in good enough shape that we want to hear about issues with them, now.
Test Plan: Edited a task, repository, and project.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7343
