Summary: Port the database checks over.
Test Plan: Triggered all the checks via intentional misconfiguration.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4590
Summary:
- Allow new-style setup to raise fatal setup errors.
- Port extension checks to new-style setup as fatal errors.
- When fatal errors are raised, abort setup and show them in a chrome-free response.
Test Plan: {F29981}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4587
Summary:
We no longer need to do PHP CLI checks (D4568) or run `git submodule` (D4581) so we don't need $PATH to be set to complete setup. Move it to post-install.
Drop the instructions about PHP-FPM because the Phabricator config is dramatically easier now that we have it.
Test Plan: Set environment.append-paths to various things, faked lack of $PATH, verified I got the warning when I expected to setting Phabricator config cleared it.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4585
Summary:
Fixes T2293.
We currently hard-require this in setup. We do not need to; we don't actually need it until we start running daemons. Move it to post-install and provide more guidance.
We could make this even easier in the future, but we'd need to special case it, since it's dangerous to let it be set to any value (if you set it to the wrong value, you can't log in). We could safely have a workflow which writes the current request URI into the database configuration, or a two-stage workflow where we set the URI and then verify it, but these both imply some special casing and complication. This should be a step forward from where we are today, regardless.
Test Plan:
Removed "phabricator.base-uri" from my configuration. Verified Phabricator still works.
Without "phabricator.base-uri" configured, logged in from multiple host names (127.0.0.1:8080, local.aphront.com:8080).
Configured "phabricator.base-uri". Verified my unblessed session no longer worked. Verified setup issue went away.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2293
Differential Revision: https://secure.phabricator.com/D4580
Summary:
Submoduling is slightly convenient for developers but hellishly difficult for many users. Since we make about a dozen updates to Javelin per year, just include the source directly.
Even if we run `git submodule status` more often, this creates additional problems for users with PATH misconfigured.
Fixes T2062 by nuking it from orbit.
Test Plan: Loaded site, browsed around. Grepped for references to submodules.
Reviewers: btrahan, vrana
CC: aran
Maniphest Tasks: T2062
Differential Revision: https://secure.phabricator.com/D4581
Summary:
Some time ago, we added `ORDER BY id ASC` to the worker `UPDATE ...` query, because someone reported that their MySQL read slaves were complaining about the query (I can't find the exact error message, but something to the effect of the rows the query affected not being deterministic). This seemed harmless since it should be the same as the query's implicit order (I guess?), but actually made the query dramatically slower for large numbers of rows.
On my local machine, this query takes about 2 seconds with ~1M rows. If I run `SELECT`, or run `UPDATE` without ORDER BY, the query takes < 0.01s. I don't understand exactly what's happening -- my guess is something to do with the ORDER BY implying that a lot of rows need to be locked?
In T2372, a user is seeing 20-60s rumtimes on this query.
I solved this by doing a SELECT, followed by an UPDATE. Each query runs quickly. This introduces the possibility of a race (two processes SELECT the same rows, then try to UPDATE), which we currently recover from by having the second UPDATE fail and then having that daemon try again 1 second later. This seems generally reasonable. Some alternatives I considered:
- We could SELECT ... LOCK FOR UPDATE, but failing and retrying a little later seems at least as good as blocking.
- We could select more rows than we need, and then try to lock some of them randomly. I think this would work well, but it's a bit more complex than what we're doing now so I left it until we have a clearer need.
Test Plan:
Inserted ~1M tasks into the queue. Ran `phd debug taskmaster`, saw ~2s task updates. Applied patch. Ran `phd debug taskmaster`, saw <1ms updates. Ran `phd launch 8 taskmaster`, saw rapid completion of tasks.
This stuff also has fairly thorough unit test coverage.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4576
Summary: These have been marked as deprecated since May 2012. Clean them up.
Test Plan: Grepped for `repository-launch`, `phd_load_tracked_repositories`: no hits.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4575
Summary: ignore - array - Array of nicks to ignore all mesages from
Test Plan: run phabot with ignore set
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4582
Summary: The easiest approach here is proably to provide a more specific rule in the sheet CSS. This saves us from having to write any JS, notably.
Test Plan: Hovered over "+" on homepage.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4579
Summary: D4453 and D4427 sailed past one another, like ships in the night.
Test Plan: Verified Differential hover and selected states.
Reviewers: asherkin, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4577
Summary:
As far as I know, we never actually need `php` to be available from the web UI. I think the history here is:
- Long ago, we checked for 'pcntl' as an extension during setup.
- Someone had an install where 'pcntl' was available from the CLI, but not the web UI. So we switched the check to use the CLI.
- Someone had an install where the CLI binary was php-fpm, which caused the 'pcntl' check to loop endlessly, so we added more checks.
But we don't actually need to do any of this -- when the user tries to run the daemons, they get an explicit message that they need to install pcntl already, and we never (as far as I know) try to run PHP scripts from the web UI other than the pcntl_available.php check (we only run `git`, `svn`, `hg`, `ssh-agent`, `diff`, `xhpast` and `pygmentize`, I think).
Test Plan: Thought carefully about places we might execute PHP scripts from the web UI. Looked through /scripts/ to try to identfiy anything we might execute.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4568
Summary: Unit test for T2345
Test Plan: Ran unit tests, checked that it passed.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4552
Summary:
T2345
getConfig throws an Exception when the key does not exist.
Also removes dead code that throws an Exception.
Test Plan:
Reloaded the Phabricator home page. In the process, found
2 Exceptions thrown due to nonexistent keys. After addressing these problems,
the home page loads without Exceptions.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4541
Summary: I've stored `PhutilSafeHTML` instance to cache on devbox and then wasn't able to read it in production.
Test Plan: Displayed revision with unreadable cache, saw error in error log but not fatal.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4520
Summary: Technically we should have these for all the OAuth providers but I don't think anyone really has trouble with them and it can probably be done generically after T1536. Preserve the functionality, at least.
Test Plan: Broke my config, verified warnings appeared.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4506
Summary: These are nonblocking warnings and can move to post-install.
Test Plan: Broke my environment and observed the warnings.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran, asherkin
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4505
Summary:
Migrate to the new hotness. Also:
- Remove a string test, which is now impossible since the config will repair itself and raise a type error.
- Restore the header even in /config/ -- this check is kind of hacky and it feels a bit more natural now that it's above the menu.
Test Plan: Set my local disk path to something invalid, verified I got a setup error.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4497
Summary: Fixes T2269. If the user manages to mess up both the PHP and Phabricator configurations, set the timezone to UTC. We basically never use this anyway (we always render into the user's time), PHP just gets angry at us if we don't set it. (We do use it for logged-out users, I suppose.)
Test Plan: Set PHP and Phabricator timezones to goofy nonsense, verified we recover sensibly from it.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228, T2269
Differential Revision: https://secure.phabricator.com/D4496
Summary: Because the Default configuration provider is loaded before custom libraries, any config options specified in them don't get a default values.
Test Plan: Looked at /config/
Reviewers: epriestley, codeblock, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4532
Summary:
Follows Phabricator's feed and puts notifications into channels
that are configured.
~~notification.all - bool - 1:1 stories to messages~~
notification.types - array - Specific story types to notify for - ["differential", "maniphest"]
notification.verbosity - int - Range of 0-3 for verbosity
notification.max_pages - int - Maximum number of pages to go back per poll
notification.page_size - int - Size of pages (limit) to poll
~~notification.channels - array - Array of channels to send messages to~~
~~notification.sleep - int - Seconds to sleep between polls~~
Test Plan: Run phabot with various configuration options
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, asherkin
Differential Revision: https://secure.phabricator.com/D4418
Summary: Ports mail stuff from the existing setup process to the more modular setup checks.
Test Plan: Configured my local install to have all these errors, verified setup raised them.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2228
Differential Revision: https://secure.phabricator.com/D4494
Summary: This is gross, but fixes an issue where `bin/storage upgrade` tries to access DB config which doesn't exist yet. We need a version of this for `bin/config` anyway. I'll sort this out into a proper sequenced startup process in a followup.
Test Plan: `bin/storage upgrade` no longer fatals when upgrading across the config boundary.
Reviewers: asherkin, codeblock, btrahan, vrana
Reviewed By: codeblock
CC: aran
Differential Revision: https://secure.phabricator.com/D4512
Summary:
If your configuration overrides the connection adapter, we need to load libraries before we can setup the database config source.
Also lock this since it won't work when edited from the web anymore, and so sneaky users can't upload stuff and then edit their config to run arbitrary code.
Test Plan: See chatlog in #phabricator. This is a problem for Facebook only.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4498
Summary: We now issue only valid setup warnings, so we can let administrators know when we detect problems.
Test Plan:
Banner:
{F29568}
Created a fake issue; saw banner. No banner inside /config/. Resovled the issue, banner went away.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4493
Summary:
When configuration is set incorrectly (e.g., of the wrong type), detect and repair it by setting it to the default value. A setup warning will be raised separately.
Notably, this removes the need to hard-code all the class types.
This runs separately from the "invalid config" check because we need to run it on every page, but do setup checks only once per restart (some of them are slow).
Also dirty setup when we edit configuration.
Test Plan: Set config incorrectly on purpose, saw Phabricator correct it on restart and on every subsequent page load until it was fixed.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2292
Differential Revision: https://secure.phabricator.com/D4492
Summary:
Read configuration from the new database source.
This adds an extra MySQL connect + query to every page. They're very cheap so I think we can suffer them for now, but I'd like to put cache in front of this at some point. The difficulties are:
- If we use APC, multi-frontend installs (Facebook) can't dirty it (major problem), and the CLI can't dirty it (fine for now, maybe a major problem later).
- If we use Memcache, we need to add config stuff.
- We could use APC in all non-Facebook installs if we can make it dirtyable from the CLI, but I don't see a reasonable way to do that.
- We don't have any other caches which are faster than the database.
So I'll probably implement Memcache support at some point, although this is a lame excuse for it.
Test Plan: Added some config values via web UI, saw them active on the install.
Reviewers: btrahan, codeblock, vrana
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4296
Summary: If `unset($env)` throws then we pop some other environment instead which is impossible to pop later.
Test Plan:
$ arc unit src/infrastructure/env/__tests__ src/applications/calendar/storage/__tests__
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4488
Summary: Connection takes .3s from dev server to master.
Test Plan:
$ bin/storage --trace upgrade --namespace x
$ bin/storage --trace destroy --namespace x
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4480
Summary: These can all fit into the gradient sprite.
Test Plan: Looked at menu with selected item, hovered over menu.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4453
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary:
Fixes T2273. We currently discard logs, service calls, etc., for daemons, but not for other scripts. However, other scripts may be long-running or issue a large body of service calls (e.g., `bin/search index --all`). We never retrieve this information from scripts (it is used to build darkconsole; in scripts, we echo it immediately under --trace), so discard it immediately to prevent these scripts from requiring a large amount of memory.
(When the daemons load `__init_script__.php` they end up calling this code, so this doesn't change anything for them. They hit another ServiceProfiler discard along the daemon pathways in libphutil, but the call is idempotent.)
Test Plan: Ran `bin/search index --all` and saw increasing memory usage before this patch, but steady memory usage after this patch.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2273
Differential Revision: https://secure.phabricator.com/D4364
Summary: Also provide a way to update old files metadata.
Test Plan: Create a revision which includes a image file. Check whether the widht, height metadata exists. Run `scripts/files/manage_files.php metadata --all` to update previously uploaded files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2101
Differential Revision: https://secure.phabricator.com/D4347
Summary: this can happen if you have Phabricator and email lists co-mingling such that Phabricator receives an email multiple times. we can prevent this from then spamming everyone or otherwise taking the action multiple times by storing a message id hash and dropping the message if we have more than one message that matches.
Test Plan: simulated sending the same email multiple times on the command line. noted only the first one made it through.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1726
Differential Revision: https://secure.phabricator.com/D4328
Summary:
This replaces D4175 and makes it so phabot doesn't message anyone.
The reasons for this are twofold:
- It was possible to get information from the bot, by private messaging it, even
if the bot was only in a +i channel (on a public network) -- meaning that if
someone knew the nickname of the bot, they could obtain e.g. ticket names
or diff titles.
- The other time it messaged people was when you typed e.g. "somenick: T123".
Most times when this is triggered, it's done so on accident.
See discussion on the old revision (D4175).
Test Plan:
15:29:33 ::: Irssi: Starting query in quartz with cb-phabot
15:29:38 <relrod> T2
(nothing back)
and
15:29:21 <@relrod> rublets: T1
15:29:21 < cb-phabot> T1: asdfasdf (Priority: Needs Triage) - http://local.elrod.me/T1
Reviewers: epriestley, btrahan, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4339
Summary:
- Ports MySQL settings to PHP.
- Removes "mysql.retries" -- this existed only because Magic Numbers Are Bad, but there is no concievable reason it should ever be set to anything other than 3.
- Introduced "Hidden" config, which isn't visible from the web (for SaaS, we'll just mark anything with secret keys as "hidden").
- Introduced "Masked" config, which will be masked in darkconsole once that gets updated.
- "Hidden" implies "Masked" and "Locked".
- Moved "storage.default-namespace" here -- it probably makes more sense than core; this was my bad in T2255.
- Put cancel button back for hidden/locked config.
- Introduce 'class' config type.
Test Plan: Viewed MySQL options. None are editable.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4326
Summary: these existed once, are no more, and don't get cleaned up in the current code path
Test Plan: storage destroy --dryrun -- noted the correct database names
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2237
Differential Revision: https://secure.phabricator.com/D4329
Summary: We interpret "size" as "size => true", and "true == 'full'", so we hit the wrong branch in the switch(). String cast explicitly.
Test Plan: Typed `{Fnnn, size}`; saw it render as a thumb instead of full.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: frozendevil, aran
Differential Revision: https://secure.phabricator.com/D4323
Summary:
- Move GC options into PHP.
- Remove the "run at" and "run for" options. The GC daemon doesn't actually do any table scans, is very gentle, and runs for like 3 seconds per day in any normal install. Just limit it to running once every 4 hours when it's caught up and call it a day.
Test Plan: Edited GC options.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4321
Summary: Use ApplicationTransactions in Config to create an edit history. Resolves T2256.
Test Plan: {F28477}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2256
Differential Revision: https://secure.phabricator.com/D4314
Summary: Show the value for all loaded configuration sources.
Test Plan:
{F28469}
{F28470}
{F28471}
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4312
Summary:
See discussion in T2221. Before we can move configuration to the database, we have a bootstrapping problem: we need database credentials to live //somewhere// if we can't guess them (and we can only really guess localhost / root / no password).
Some options for this are:
- Have them live in ENV variables.
- These are often somewhat unfamiliar to users.
- Scripts would become a huge pain -- you'd have to dump a bunch of stuff into ENV.
- Some environments have limited ability to set ENV vars.
- SSH is also a pain.
- Have them live in a normal config file.
- This probably isn't really too awful, but:
- Since we deploy/upgrade with git, we can't currently let them edit a file which already exists, or their working copy will become dirty.
- So they have to copy or create a file, then edit it.
- The biggest issue I have with this is that it will be difficult to give specific, easily-followed directions from Setup. The instructions need to be like "Copy template.conf.php to real.conf.php, then edit these keys: x, y, z". This isn't as easy to follow as "run script Y".
- Have them live in an abnormal config file with script access (this diff).
- I think this is a little better than a normal config file, because we can tell users 'run phabricator/bin/config set mysql.user phabricator' and such, which is easier to follow than editing a config file.
I think this is only a marginal improvement over a normal config file and am open to arguments against this approach, but I think it will be a little easier for users to deal with than a normal config file. In most cases they should only need to store three values in this file -- db user/host/pass -- since once we have those we can bootstrap everything else. Normal config files also aren't going away for more advanced users, we're just offering a simple alternative for most users.
This also adds an ENVIRONMENT file as an alternative to PHABRICATOR_ENV. This is just a simple way to specify the environment if you don't have convenient access to env vars.
Test Plan: Ran `config set x y`, verified writes. Wrote to ENVIRONMENT, ran `PHABRICATOR_ENV= ./bin/repository`.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2221
Differential Revision: https://secure.phabricator.com/D4294
Summary:
This is somewhat clowny, particularly in how it handles JSON encode/decode, but
I've commented why I did things the way I did. The goal is to store minified JSON
but show pretty-printed JSON where possible, to the user editing it.
Test Plan:
* Went to /config/ and saw a list of keys from the `default` config.
* Clicked on one of them, submitted the default value successfully.
* Changed the value to invalid JSON and got a decent error.
* Changed the value to valid JSON and checked the DB to confirm it saved.
* Confirmed the DB values were minified.
* Confirmed the user-facing values were pretty-printed where they could be.
* Confirmed that PHIDs were getting assigned properly and that isDeleted
properly defaulted to false/0.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2246
Differential Revision: https://secure.phabricator.com/D4290
Summary: Currently, we have a configuration stack for unit tests, but they're built in to `PhabricatorEnv`. Pull them out and formalize them, so we can add more configuration sources (e.g., database).
Test Plan: Ran unit tests, web requests, scripts. This code had fairly good existing test coverage.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223, T2221
Differential Revision: https://secure.phabricator.com/D4284
Summary:
We have a bunch of code duplication now between __init_script__.php and webroot/index.php. Consoldiate these methods and move them into PhabricatorEnv.
Merge PhabricatorRequestOverseer into PhabricatorStartup.
Test Plan: Loaded page, ran script. Wiped PHABRICATOR_ENV; loaded page, ran script; got errors.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4283
Summary:
We have a lot of mess to get through before we can load libphutil and enter Phabricator code properly. Move it to a dedicated class.
I'm probably going to merge PhabricatorRequestOverseer into this, although the check that lives there now is kind of weird. It also does not really need to be a pre-load check and could be handled better.
I stopped shoving stuff in here once I got to ENV stuff, I'm going to tackle that next.
Test Plan: Ran phabricator normally; introduced fatals and misconfigurations. Grepped for changed symbols.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T2223
Differential Revision: https://secure.phabricator.com/D4282
Summary:
The search indexing API has several problems right now:
- Always runs in-process.
- It would be nice to push this into the task queue for performance. However, the API currently passses an object all the way through (and some indexers depend on preloaded object attributes), so it can't be dumped into the task queue at any stage since we can't serialize it.
- Being able to use the task queue will also make rebuilding indexes faster.
- Instead, make the API phid-oriented.
- No uniform indexing API.
- Each "Editor" currently calls SomeCustomIndexer::indexThing(). This won't work with AbstractTransactions. The API is also just weird.
- Instead, provide a uniform API.
- No uniform CLI.
- We have `scripts/search/reindex_everything.php`, but it doesn't actually index everything. Each new document type needs to be separately added to it, leading to stuff like D3839. Third-party applications can't provide indexers.
- Instead, let indexers expose documents for indexing.
- Not application-oriented.
- All the indexers live in search/ right now, which isn't the right organization in an application-orietned view of the world.
- Instead, move indexers to applications and load them with SymbolLoader.
Test Plan:
- `bin/search index`
- Indexed one revision, one task.
- Indexed `--type TASK`, `--type DREV`, etc., for all types.
- Indexed `--all`.
- Added the word "saboteur" to a revision, task, wiki page, and question and then searched for it.
- Creating users is a pain; searched for a user after indexing.
- Creating commits is a pain; searched for a commit after indexing.
- Mocks aren't currently loadable in the result view, so their indexing is moot.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: 20after4, aran
Maniphest Tasks: T1991, T2104
Differential Revision: https://secure.phabricator.com/D4261
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary: Does this seem reasonable? It's a bit more compact than digest() (6 bits / byte instead of 4 bits / byte) and 72 bits of entropy @ 12 bytes instead of 128 bits of entropy @ 32 bytes. I feel like it's important to preserve the printability, though, and this seemed like a fairly good balance of concerns.
Test Plan: unit tests
Reviewers: vrana
Reviewed By: vrana
CC: aran, yemao932
Differential Revision: https://secure.phabricator.com/D4253
Summary:
- Build "sshd-auth" (for authentication) and "sshd-exec" (for command execution) binaries. These are callable by "sshd-vcs", located [[https://github.com/epriestley/sshd-vcs | in my account on GitHub]]. They are based on precursors [[https://github.com/epriestley/sshd-vcs-glue | here on GitHub]] which I deployed for TenXer about a year ago, so I have some confidence they at least basically work.
- The problem this solves is that normally every user would need an account on a machine to connect to it, and/or their public keys would all need to be listed in `~/.authorized_keys`. This is a big pain in most installs. Software like Gitosis/Gitolite solve this problem by giving you an easy way to add public keys to `~/.authorized_keys`, but this is pretty gross.
- Roughly, instead of looking in `~/.authorized_keys` when a user connects, the patched sshd instead runs `echo <public key> | sshd-auth`. The `sshd-auth` script looks up the public key and authorizes the matching user, if they exist. It also forces sshd to run `sshd-exec` instead of a normal shell.
- `sshd-exec` receives the authenticated user and any command which was passed to ssh (like `git receive-pack`) and can route them appropriately.
- Overall, this permits a single account to be set up on a server which all Phabricator users can connect to without any extra work, and which can safely execute commands and apply appropriate permissions, and disable users when they are disabled in Phabricator and all that stuff.
- Build out "sshd-exec" to do more thorough checks and setup, and delegate command execution to Workflows (they now exist, and did not when I originally built this stuff).
- Convert @btrahan's conduit API script into a workflow and slightly simplify it (ConduitCall did not exist at the time it was written).
The next steps here on the Repository side are to implement Workflows for Git, SVN and HG wire protocols. These will mostly just proxy the protocols, but also need to enforce permissions. So the approach will basically be:
- Implement workflows for stuff like `git receive-pack`.
- These workflows will implement enough of the underlying protocol to determine what resource the user is trying to access, and whether they want to read or write it.
- They'll then do a permissons check, and kick the user out if they don't have permission to do whatever they are trying to do.
- If the user does have permission, we just proxy the rest of the transaction.
Next steps on the Conduit side are more simple:
- Make ConduitClient understand "ssh://" URLs.
Test Plan: Ran `sshd-exec --phabricator-ssh-user epriestley conduit differential.query`, etc. This will get a more comprehensive test once I set up sshd-vcs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603, T550
Differential Revision: https://secure.phabricator.com/D4229
Summary: Some fallout from D4191.
Test Plan: Sent "D12" in IRC and got a response.
Reviewers: epriestley, vrana, zeeg
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4235
Summary:
Load the data for daemon worker tasks when viewing them, and present
the information in a useful way. This defaults to printing the json data,
but for some classes of worker it will also link to the corresponding
object, to make debugging problems with workers easier.
Test Plan:
load /daemon/task/NNN for a CommitParserWorker and a MetaMTAWorker, and
see the addition of a data field with useful content and link.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4226
Summary:
D4188 adds a preview of Paste contents to the list, but gets slow for large lists if you have Pygments installed since it has to spend ~200ms/item highlighting them. Instead, cache the highlighted output.
- Adds a Paste highlighting cache. This uses RemarkupCache because it has automatic GC and we don't have a more generalized cache for the moment.
- Uses the Paste cache on paste list and paste detail.
- Adds a little padding to the summary.
- Adds "..." if there's more content.
- Adds line count and language, if available. These are hidden on Mobile.
- Nothing actually uses needRawContent() but I left it there since it doesn't hurt anything and is used internally (I thought the detail view did, but it uses the file content directly, and must for security reasons).
Test Plan:
{F27710}
- Profiled paste list, saw good performance and few service calls.
- Viewed paste.
- Viewed raw paste content.
Reviewers: codeblock, btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4204
Summary: Include task ID and class when raising this exception. I took a brief stab at doing this generically, but (a) we specifically raise this exception outside of normal try/catch because we can't follow normal recovery rules for it and (b) we don't have a reasonable PhutilProxyException or similar right now which would preserve stack traces, and don't have builtin exception nesting support until PHP 5.3.
Test Plan: Faked this exception, verified we get more information in the logs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2193
Differential Revision: https://secure.phabricator.com/D4205
Summary:
When a user submits an action with no effect (like an empty comment, an "abandon" on an already-accepted revision, or a "close, resolved" on a closed task) we want to alert them that their action isn't effective. These warnings fall into two general buckets:
- User is submitting two or more actions, and some aren't effective but some are. Prompt them to apply the effective actions only.
- A special case of this is where the only effective action is a comment. We provide tailored text ("Post Comment") in this case.
- User is submitting one action, which isn't effective. Tell them they're out of luck.
- A special case of this is an empty comment. We provide tailored text in this case.
By default, the transaction editor throws when transactions have no effect. The caller can then deal with this, or use `PhabricatorApplicationTransactionNoEffectResponse` to provide a standard dialog that gives the user information as above. For cases where we expect transactions to have no effect (notably, "edit" forms) we just continue on no-effect unconditionally.
Also fix an issue where new, combined or filtered transactions would not be represented properly in the Ajax response (i.e., return final transactions from `applyTransactions()`), and translate some strings.
Test Plan:
- Submitted empty and nonempy comments in Macro and Pholio.
- Submitted comments with new and existing "@mentions".
- Submitted edits in both applications.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T912, T2104
Differential Revision: https://secure.phabricator.com/D4160
Summary: Currently, AphrontProxyResponse is expected to build a string. This prevents some response types (like Dialog) from being proxied, because they have special rules. Instead, make proxy responses reduce into a non-proxied response so it's possible to proxy any type of response and hit all the normal rules for it.
Test Plan: Built a proxied DialogResponse on top of this.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104, T912
Differential Revision: https://secure.phabricator.com/D4159
Summary:
Split Pholio's transaction implementation into generic and application-specific parts. Moves us toward generic transactions, with support for:
- Editing and deleting comments.
- Setting visibility of individual comments (I'm not a fan of this feature but we'll see).
I want to move everything to a more generic piece of infrastructure but there's very little they can share right now so adding transactions to, e.g., Paste or Macros (T2157) means massive amounts of similar code.
Tons of work left to do here, but I think it basically works. Here's a screenshot:
{F26820}
Test Plan: Made transactions in Pholio.
Reviewers: btrahan, vrana, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2104
Differential Revision: https://secure.phabricator.com/D4136
Summary:
- Remove unused CSS rules and non-sprite images.
- Sprite the logo.
Test Plan: Looked at site, looked good.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4113
Summary:
Issues here:
- Need an application-sized "eye", or a "home" icon for "Phabricator Home".
- Some of the "apps_lb_2x" sliced images are the "_dark_" versions, not the light versions.
- If you slice an application-sized "logout" (power off) icon and application-sized "help" (questionmark in circle) icon I can replace the current menu icons and nearly get rid of "autosprite".
- To replace the icons on /applications/, the non-retina size is "4x", so we'd need "8x" for retina. Alternatively I can reduce the icon sizes by 50%.
- The "Help", "Settings" and "Logout" items currently have a "glowing" hover state, which needs a variant (or we can drop it).
- The /applications/ icons have a white hover state (or we can drop it).
- The 1x application (14x14) icons aren't used anywhere right now, should they be? Maybe in the feed in the future, etc?
- The "apps-2x" and "apps-large" sheets are the same image, but getting them to actually use the same file is a bit tricky, so I just left them separate for now.
Test Plan:
{F26698}
{F26699}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4108
Summary: Do we have an icon with 2x for the right menu?
Test Plan: {F26590}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4101
Summary:
This doesn't lay in everything, but:
- Break the buttons gradient apart into components and rebuild it (along with other gradients) into a single gradient sprite (possible after {D4099}).
- Use the sliced gradient for the crumbs background.
- Use the sliced image for the crumb divider.
- Adds the black/white app sheets, but I'm not generating them quite yet.
Test Plan: {F26537} {F26540}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4100
Summary: Switch to the final versions of these
Test Plan: Will add screenshots...
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4032
Summary:
- The filesystem is now the authority for which sprites are available. If you add new icons, the generation process will pick them up.
- I broke out icon generation and added retina support. App icon generation still uses the old method.
- Update ActionList and RemarkupControl to use the new sheet.
- Use white icons on hover.
- Also fixed a couple of minor issues with some stuff in Firefox/Chrome.
Test Plan:
{F25750}
{F25751}
{F25752}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2013
Differential Revision: https://secure.phabricator.com/D4027
Summary:
When users middle click or command-click an image, we should open it in a new tab, not open a lightbox.
See https://github.com/facebook/phabricator/issues/234
Test Plan: Left, middle, and command-clicked a lightbox image.
Reviewers: vrana, chad, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4020
Summary:
Just laying more groundwork out of ready-made UI.
{F22349}
Test Plan: Looked at a mock.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3832
Summary:
I'm not going to land this until it's a bit more fleshed out since it would just confuse users, but this is probably more reviewable as a few diffs adding a couple features than one ULTRA-diff adding everything. Implement application basics for Pholio. This does more or less nothing, but adds storage, subscribe, flag, markup, indexing, query basics, PHIDs, handle loads, a couple of realy really basic controllers, etc.
Basic hierarchy is:
- **Moleskine**: Top-level object like a Differential Revision, like "Ponder Feed Ideas".
- **Image**: Each Moleskine has one or more images, like the unexpanded / expanded / mobile / empty states of feed.
- **Transaction**: Comment or edit, like Maniphest. I generally want to move most apps to a transaction model so we can log edits.
- **PixelComment**: Equivalent of an inline comment.
Test Plan: Created a fake object and viewed it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, davidreuss
Maniphest Tasks: T2097
Differential Revision: https://secure.phabricator.com/D3817
Summary: Companion diff to D4003.
Test Plan: Rigged up a response which loaded a CSS file with `body { background: red; }`, verified page turned red after I clicked the button.
Reviewers: vrana, chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2086
Differential Revision: https://secure.phabricator.com/D4004
Summary:
People hit three issues with D3914:
- As per T2059, we applied a schema change from a `.php` patch, which currently does not work if you use a different user to make schema changes than for normal use.
- Since the change in question is idempotent, just move it to a `.sql` patch. We'll follow up in T2059 and fix it properly.
- Rogue daemons at several installs used old code (expecting autoincrement) to insert into the new table (no autoincrement), thereby creating tasks with ID 0.
- Rename the table so they'll fail.
- This also makes the code a little more consistent.
- Some installs now have tasks with ID 0.
- Use checks against null rather than against 0 so we can process these tasks.
The major issues this fixes are the schema upgrade failure in T2059, and the infinite loops in T2072 and elsewhere.
This isn't really a fully statisfactory fix. I'll discuss some next steps in T2072.
Test Plan: Created new tasks via MetaMTA/Differential. Ran tasks with `phd debug taskmaster`. Inserted a task 0 and verified it ran and archived correctly.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2072, T2059
Differential Revision: https://secure.phabricator.com/D3973
Test Plan:
/diffusion/ARC/lint/master/src/, clicked on count link.
/diffusion/ARC/browse/master/src/difference/?lint=XHP9, clicked on file name.
/diffusion/ARC/browse/master/src/difference/ArcanistDiffUtils.php?lint=, verified that all messages are displayed.
/diffusion/ARC/browse/master/src/difference/ArcanistDiffUtils.php?lint=XHP9.
/diffusion/ARC/browse/master/src/difference/ArcanistDiffUtils.php?lint=TXT3, verified that 0 messages are displayed.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3929
Summary: This saves lint errors to the path change of current commit. It requires pushed revision. It doesn't save difference from previous commit mentioned in T2038#comment-4 - I don't plan doing it after all, everything would be much more complicated and the amount of data saved with this approach isn't that bad.
Test Plan: Applied patch, ran script, verified DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2038
Differential Revision: https://secure.phabricator.com/D3899
Summary: don't need it now that uploading files is so easy. Plus it made for some buggy jonx if / when there were bad image links coupled with caching. In theory this is a lot less pretty though if folks linked to a bunch of files served elsewhere using images.
Test Plan: http://does-not-exist.com/imaginary.jpg rendered as a link!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2000
Differential Revision: https://secure.phabricator.com/D3908
Summary: See D3912 for discussion. InnoDB may reuse autoincrement IDs after restart; provide a way to avoid it.
Test Plan: Unit tests. Scheduled and executed tasks through `drydock lease --type host` and `phd debug taskmaster`.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3914
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
use PhutilURI class to get the slug and the fragment, normalize the slug, and then glue it back together with another PhutilURI
fixes https://github.com/facebook/phabricator/issues/228
Test Plan: had a few links like [[ example/doc#title | wiki fun ]] and verified links generated were correct
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3894
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Tightens up a bunch of stuff:
- In `drydock lease`, pull and print logs so the user can see what's happening.
- Remove `DrydockAllocator`, which was a dumb class that did nothing. Move the tiny amount of logic it held directly to `DrydockLease`.
- Move `resourceType` from worker task metadata directly to `DrydockLease`. Other things (like the web UI) can be more informative with this information available.
- Pass leases to `allocateResource()`. We always allocate in response to a lease activation request, and the lease often has vital information. This also allows us to associate logs with leases correctly.
Test Plan: Ran `drydock lease --type host` and saw it perform a host allocation in EC2.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3870
Summary:
We lock tasks by setting `leaseOwner` to a unique value, but the value is currently unique-to-the-process rather than unique-to-the-query. This means that if a process leases a task, then leases another task, both tasks will have the same `leaseOwner`. This can cause an issue where we go to select the task we just leased and get the other task instead, if we aren't careful about the select construction.
We can avoid this by being clever and making sure the select is constructed correctly, but making the `leaseOwner` unique to the query is much simpler and more foolproof. This guarantees we always select only the rows we just leased.
Also remove `PhabricatorGoodForNothingWorker` since `PhabricatorTestWorker` fills its role of allowing things to be tested, and simplify the unit tests since we don't need to be clever about avoiding this issue any more.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3862
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary:
When a PhabricatorTestCase dies after creating storage fixtures, it leaves
those storage fixtures around. This doesn't happen often, but when it does
happen it's a pain to cleanup. The --unittest-fixtures option helps automate
that cleanup.
Test Plan:
Ran it with --dryrun, then for real. Became overwhelmed with a Zen like peace
after regarding the tidiness and beauty of SHOW DATABASES.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3858
Summary: Make mobile-friendly and provide UI to cancel/retry tasks. Remove display of task data to arbitrary users, as it may be sensitive.
Test Plan:
{F22502}
{F22503}
{F22504}
{F22505}
{F22506}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3854
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Test Plan: Looked at diff with several different lint errors, saw correct messages in their inline comments.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3827
Summary: you can now add, edit, and delete status events. also added a "description" to status events and surface it in the big calendar view on mouse hover. some refactoring changes as well to make validation logic centralized within the storage class.
Test Plan: added, edited, deleted. yay.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T407
Differential Revision: https://secure.phabricator.com/D3810
Summary: Followup to D3804. Makes Diffusion main comments (not just inlines) render properly with the modern markup pipeline.
Test Plan: Created previews and inline previews. Edited inlines. Saved comment, viewed comment. Verified caches were read and written using "Services" tab.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3805
Summary:
See T1963 for discussion of the Facebook-specific hack.
Differential currently uses a one-stage cache (render -> postprocess -> save in cache) rather than the two-stage cache (render -> save in cache -> postprocess) offered by `PhabricatorMarkupInteface`. This breaks Differential comments coming out of cache for the lightbox, and makes various other things suboptimal (status of handles like @mentions and embeds are not displayed accurately).
Instead, use the modern stuff.
Test Plan:
- Created preview comments and inlines in Differential.
- Edited a Differential inline.
- Submitted main and inline Differential comments.
- Viewed and edited Differential summary and test plan.
- Created preview comments and inlines in Diffusion.
- Submitted comments and inlines in Diffusion.
- Verified Differential now loads and saves to the generalized markup cache (Diffusion is close, but main comments still hold a single-stage cache).
- Verified old Differential comments work correctly with the lightbox.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1963
Differential Revision: https://secure.phabricator.com/D3804
Summary:
Provides a simple way for policy-aware queries to pre-filter results without needing to maintain separate cursors, and fixes a bunch of filter-related edge cases.
- For reverse-paged cursor queries, we previously reversed each individual set of results. If the final result set is built out of multiple pages, it's in the wrong order overall, with each page in the correct order in sequence. Instead, reverse everything at the end. This also simplifies construction of queries.
- `AphrontCursorPagerView` would always render a "<< First" link when paging backward, even if we were on the first page of results.
- Add a filtering hook to let queries perform in-application pre-policy filtering as simply as possible (i.e., without maintaing their own cursors over the result sets).
Test Plan: Made feed randomly prefilter half the results, and paged forward and backward. Observed correct result ordering, pagination, and next/previous links.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3787
Summary:
images attached to maniphest tasks and mentioned in remarkup anywhere now invoke a lightbox control that lets the user page through all the images.
lightbox includes a download button, next / prev buttons, and if we're not at the tippy toppy of hte page an "X" or close button.
we also respond to left, right, and esc for navigating.
next time we should get non-images working in here...!
Test Plan:
played with maniphest - looks good
made comments with images. looks good.
made sure multiple image comments worked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, chad
Maniphest Tasks: T1896
Differential Revision: https://secure.phabricator.com/D3705
Summary: The property is called 'actor', not 'user'. Extend from Phobject to catch this class of error automatically. Upgrade a couple of getActor() to requireActor().
Test Plan: Created new users.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3776
Summary: I need this shortly and it seems like something we're likely to need more of in the future now that fixtures work.
Test Plan: Ran unit tests. Used this productively in an upcoming diff.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3775
Summary:
Q1 to Q4 is used for parts of the year.
Also unlink all `[A-Z]0.*`, we don't route them anymore.
Test Plan:
Q0
Q1
Q10
Reviewers: epriestley, pieter
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3781
Summary: See comments.
Test Plan: Uploaded a small image in Safari via drag-and-drop.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3771
Summary:
We don't support this and say so in the documentation, but can check explicitly.
https://github.com/facebook/phabricator/issues/148
Test Plan: Set base-uri to stuff with/without paths, verified setup caught mistakes and gave useful errors.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3768
Summary:
See comment.
This can reveal some pretty bad bugs but HPHP handles this correctly so we already know about them.
Test Plan:
Added `phlog()` to `__call()` and observed what is defined for each method (under PHP). Also:
class C {
function __call($name, $args) {
static $class;
if (!$class) {
$class = get_class($this);
}
return $class;
}
}
class D extends C {
}
class E extends C {
}
$d = new D;
$e = new E;
var_dump($d->x());
var_dump($e->x()); // Prints D under PHP!
See also D3754.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1261
Differential Revision: https://secure.phabricator.com/D3753
Summary:
Allow skins to serve arbitrary resources without needing to be mapped, so we can have a vibrant community of amateur skinners.
For "basic" skins, just put all the "css/" on the page always.
Includes an image to prove that works.
@vrana, pretty sure this has no impact outside of Phame but it does change Celerity so it might be to blame if there's any weirdness with static resources.
Test Plan:
{F21341}
{F21340}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3719
Summary: Restore summarization. Use the remarkup cache, and try to do it somewhat-intelligently (pick the first paragraph that looks like it's text).
Test Plan:
{F21323}
{F21324}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3715
Summary:
Two high-level things happening here:
- We no longer ever need to put meta-UI (content creation, editing, notices, etc.) on live blog views, since this is all in Phame now. I pulled this out.
- On the other hand, I pushed more routing/control logic into Skins and made the root skin a Controller instead of a View. This simplifies some of the code above skins, and the theory behind this is that it gives us greater flexibility to, e.g., put a glue layer between Phame and Wordpress templates or whatever else, and allows skins to handle routing and thus add pages like "About" or "Bio".
- I added a basic skin below the root skin which is more like the old root skin and has standard rendering hooks.
- "Ten Eleven" is a play on the popular (default?) Wordpress themes called "Twenty Ten", "Twenty Eleven" and "Twenty Twelve".
Test Plan: Viewed live blog and live posts. They aren't pretty, but they don't have extraneous resources.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3714
Summary: See discussion in D3722. Good catch -- I'd definitely say this is a bug.
Test Plan: Rendered two <div />s, one with mustcapture set to `true` and one to `false`. The first got `data-mustcapture`; the second did not.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3723
Summary: I think this is simpler and better than making them conditional. In properly configured installs this should have no impact (they already use a CDN URI). In not-quite-properly configured installs this will add a trivial, highly-compressible number of bytes to the source. In all cases we have less code.
Test Plan: Loaded some pages, everything worked.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3709
Summary:
This leaves the UI in a pretty rough state, but implements blog policy controls and queries, and 1:1 relationships between posts and blogs. Needs a bunch more cleanup but seemed like an okayish breaking point in terms of cohesiveness.
Posts have these rules:
- Drafts are visible only to the author.
- Published posts are visible to anyone who can see the blog they appear on.
- Posts are only editable by the author.
...so we don't need any special policy UI or state to accommodate these rules.
Posts may have no blog if they're grandfathered in or you write a post to a blog and then lose the ability to see the blog. This is the messiest edge case -- specifically:
- You write a post to blog A.
- You publish the post.
- I edit the "Visible To:" for blog A and set it to exclude you.
What we do in this case is let you see the post in "My Posts", but you can no longer see the blog and you'll see the post as not being part of a blog. We can maybe give you some UI to let you move it later or something.
Test Plan: Hit all (I think?) of the interfaces without issues. Definitely some UI problems still right now.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3694
Summary:
Adds "can view" and "can edit" policies to blogs. Replaces "bloggers" with "can join".
This doesn't fully remove "bloggers" because I didn't want this to get too crazy/huge.
Test Plan: Created, edited, deleted blogs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3693
Summary: Provide array() default so we don't foreach() over null in the case of a missing config (from @dctrwatson).
Test Plan: Will verify with @dctrwatson.
Reviewers: vrana, btrahan, dctrwatson
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3686
Summary: When we receive an email, figure out if any of the other tos and ccs are users. If they are, pass their phids through the stach as "exclude phids" and exclude them from getting the email.
Test Plan: used the various applications (audit, differential, maniphest) and noted emails were sent as expected.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin, vrana
Maniphest Tasks: T1676
Differential Revision: https://secure.phabricator.com/D3645
Summary:
Blames to D3659.
It's not that old (< 1 day) to fix it properly (add patch for dropping xhpast DB).
Test Plan:
$ arc unit src/applications/calendar/storage/__tests__/PhabricatorCalendarHolidayTestCase.php
Reviewers: btrahan, epriestley
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3670
Summary: ...and use 'em in the phame blog case.
Test Plan: viewed blog.phabricator.dev and it actually looked right!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3666
Summary:
We need to go slightly farther to stub reply handler functionality for Ponder in at least some configurations, where we rely on the presence of a unique random key to generate per-object or per-object+user reply addresses.
This should probably be formalized in an interface since it's currently pretty ad-hoc.
Test Plan:
- Made comments in Ponder under a per-user email configuration.
- Ran migration, verified mail keys were generated.
- Ran migration again (with --apply), verified existing questions were skipped.
- Created a new question, verified mail key generation.
Reviewers: pieter
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1873
Differential Revision: https://secure.phabricator.com/D3665
Summary:
It isn't deleted by `storage destroy`.
This should be a no-op on current storage because we execute `CREATE DATABASE IF NOT EXISTS`.
Test Plan:
$ bin/storage destroy --dryrun
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3659
Summary: For immutable objects, just use the ID as a cursor.
Test Plan:
- Analyzed commits from an empty cursor.
- Checked that cursor was good.
- Pulled some more commits.
- Analyzed commits again, verified it only hit the new ones.
- Verified the graph of "Count of CMIT" looked reasonable.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1866
Differential Revision: https://secure.phabricator.com/D3656
Summary:
Alternate proposal for D3635.
- Works better with small images.
- Produces a predictable thumbnail size.
- Somewhat reasonable output on 3000x10 images.
- Increase the size of Macro thumbnails to 240px.
Test Plan: {F20497}
Reviewers: vrana, chad
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3638
Summary:
Basic infrastructure for generalizing subscriptions/CCs for T1808, T1514 and T1663.
- Implement `PhabricatorSubscribableInterface` and you'll get a subscribe/unsubscribe button for free.
- If there are any auto-subscribed users (like the question author) you can specify them; this makes more sense for Tasks and Revisions than Ponder probably, but maybe the author should be auto-subscribed.
- Subscriptions are either "explicit" (the user clicked 'subscribe') or "implicit" (the user did something which causes them to become subscribed naturally). If a user unsubscribes, they'll no longer be added by implicit subscriptions. This may or may not be relevant to Ponder but is an existing Herald feature in Differential.
- Helper method on PhabricatorSubscribersQuery to load subscribers.
- This doesn't handle actually sending email, etc. I think that's all so application-specific that it doesn't belong here.
- Now seems to work.
Test Plan:
{F20552}
{F20553}
Reviewers: pieter, btrahan
Reviewed By: pieter
CC: aran
Maniphest Tasks: T1663, T1514, T1808
Differential Revision: https://secure.phabricator.com/D3637
Summary: We never use this and almost certainly never will. It's been in Lisk for ~7 years but is a solution in search of a problem. It causes a conflict with any DAO that has a `version` column.
Test Plan: Browsed around, performed inserts and updates. Edited a Phriction document.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, leslie.chong
Differential Revision: https://secure.phabricator.com/D3625
Summary:
Fixes a TODO, and silences a warning introduced by D3601.
There are several cases where we load data like:
SELECT *, ... AS extraData FROM ...
...and then pass it to `loadAllFromArray()`. Currently, this causes us to set an `extraData` property on the object.
This idiom seems fairly useful and non-dangerous, so I made `loadFromArray()` just drop extra keys.
Since we hit this loop a potentially huge number of times (10,000+ for full Maniphest pages) I did some microoptimization. Lisk is hot enough that it's one of the few places where it's worthwhile (see D1291).
Test Plan: Loaded homepage, no longer got warnings about `viewerIsMember` from Project queries. Browsed ~10 apps, didn't see any issues.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3606
Summary:
I make this error quite often: I forget to declare a property I am writing to or I make a typo in it.
PHP implicitly creates a public property which I don't like.
I would much rather see a linter warning me against this than this runtime check but writing it is very difficult:
- We need to explore all parents of the class we are checking.
- It is even possible that children will declare that property but it's OK to treat this as error anyway.
- We can extend also builtin or external classes.
- It's somewhat doable for `$this` but even more complex for any `$obj` because we don't know the class of it.
This should catch significant part of these errors and I'm fine with that.
I don't plan escalating to exception because this error is not fatal and should not stop the application from working.
Test Plan: Loaded homepage, checked log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3601
Summary:
Calling `->setPHID()` or other common Lisk setters creates an implicit public property `$phid`.
I don't like implicit properties and I see them as errors.
Its public visibility also makes me nervous and is vulnerable to bypassing any setters we may create.
Test Plan: Loaded homepage, checked log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3600
Summary: this then enables people to create blog.theircompany.com. And for us, blog.phacility.com...!
Test Plan:
- created custom URIs of various goodness and verified the error messages were sensical.
- verified if "false" in configuration then custom uri stuff disappears
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1373
Differential Revision: https://secure.phabricator.com/D3542
Summary: We want to allow a broader access to our installation but we need to check the request in that case.
Test Plan:
Created a simple `PhabricatorRequestChecker` returning a custom controller.
Verified that this controller is used when accessing any page.
Returned `null` from this checker and verified that all 209 Phabricator pages are accessible.
Reviewers: epriestley
Reviewed By: epriestley
CC: scottmac, aran, Korvin, btrahan
Differential Revision: https://secure.phabricator.com/D2488
Summary:
It happens to me quite often that I leave the window with revision (by closing it or by visiting a link from it).
When I return then the comment draft is there so I clowncopterize it but forget that I wanted to take some other action than Comment.
Test Plan: Selected "Add Reviewers", added some reviewers, closed the window, opened it - the action and reviewers were still there.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3530
Summary:
We have two troubles with this script:
# Our revisions and commits don't fit in the memory. (Our tasks do :-).)
# Reindexing revisions is slow.
Test Plan: Ran it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3483
Summary:
People have occasionally complained about phabricator being slow. We have
the access log to look at to see when slowness happens, but it doesn't tell
us much about why it happened. Since it's usually a sporadic issue that's
reported, it's hard to reproduce and then profile. This change will allow us
to collect sampled profiles so we can look at them when slowness occurs.
Test Plan:
checking that sampling works correctly:
- set rate to 0; do several page loads; check no new entries in table
- set rate to 1; check that there's a new row in the table for each page load
- set rate to 10; check that some requests write to table and some don't
check new ui for samples:
- load /xhprof/list/all/, see a list with a lot of samples
- load /xhprof/list/sampled/, see only sampled runs
- load /xhprof/list/manual/, see only non-sampled runs
- load /xhprof/list/my-runs/, se only my manual runs
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3458
Summary:
- Renames `PhabricatorPolicyQuery` to `PhabricatorPolicyAwareQuery` (a query which respects policy settings).
- Introduces `PhabricatorPolicyQuery`, which loads available policies (e.g., "member of project X").
- Introduces `PhabricatorPolicy`, which describes a policy.
- Allows projects to be set as policies.
- Allows Paste policies to be edited.
- Covers crazy cases where you make projects depend on themselves or each other because you are a dastardly villan.
Test Plan: Set paste and project policies, including crazy policies like A -> B -> A, A -> A, etc.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3476
Summary: Add storage to Pastes for view policies.
Test Plan: Set policies on pastes, see next diff.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D3474
Summary: This is pretty spartan, but it does the job.
Test Plan:
Patch, update storage, add some comment
to your favorite question or answer.
Reviewers: nh, vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin, starruler, syrneus, me.here, victorzarate7
Maniphest Tasks: T1645
Differential Revision: https://secure.phabricator.com/D3471
Summary:
I want to implement a `{P123}` rule to embed pastes, but we need viewers everywhere before it will work with privacy.
This is not exhaustive; many Remarkup callsites haven't been converted to `PhabricatorMarkupInterface` yet.
Test Plan: Looked at Maniphest, Differential, Diffusion, Phriction; added markup, made edits and hit previews.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3428
Summary:
I've replaced all `id(new PhabricatorObjectHandleData(...))->loadHandles()` by `$this->loadViewerHandles(...)`.
Lint caught one usage in a static method.
Test Plan: Displayed revision with sporadic author.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3432
Summary: Previously, the identification string was thrown at the server long before you were connected, I've moved this to the end of the motd raw, and now errthangz gud
Test Plan: Register an account for your bot to use, give your bot the correct nick and password, then watch
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3410
Summary:
Currently, CelerityController extends AphrontController, not PhabricatorController. (I think I imagined Celerity being somewhat stand-alone and didn't want to create a dependency.)
This creates a concrete problem if a static resource is missing, since we throw an exception, but the higher-level exception handlers depend on the User existing in order to show an appropriate response page. This is the only controller which doesn't extend PhabricatorController, and it doesn't seem worthwhile to make a weird edge case out of it.
Specific repro case is:
- Remove `externals/javelin/` (or forget to run `git submodule update --init`).
- Load a static resource.
- Get "[Rendering Exception] Argument 1 passed to PhabricatorMainMenuView::setUser() must be an instance of PhabricatorUser, null given, called in /services/apache/phabricator/phabricator/src/view/page/PhabricatorStandardPageView.php on line 435 and defined"
Test Plan:
- Followed above steps, no more fataling.
- Verified this is the only weird controller.
Reviewers: voldern, vrana, btrahan
Reviewed By: voldern
CC: aran
Differential Revision: https://secure.phabricator.com/D3389
Summary:
I like systems that just work. It is possible to store files larger than max_allowed_packet in MySQL and we shouldn't demand it.
It also fixes a problem when file was smaller than `storage.mysql-engine.max-size` but its escaped version was larger than `max_allowed_packet`.
Test Plan: Reduced the size to 5e4, uploaded 90 kB file, checked the queries in DarkConsole, downloaded the file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3392