Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
Ref T4420. This is mostly a design change, but addresses two functional issues:
# Many sources exclude disabled accounts, system agents, archived projects, etc. It is rare to select these, but excluding them completely is too severe, and we've made more than a handful of changes over time to replace a "users" endpoint with an "accounts" endpoint (to include disabled users) or similar. Instead, always show these results, but sort them last and use a special style to clearly mark them as closed, disabled, or otherwise unusual.
- As a practical consequence, all the similar endpoints can now be merged, so "accounts" and "users" return the exact same result sets.
# Increasingly, sources can return multiple object types in a single list. For example, "CC" can have a user or mailing list, and soon a project or repository. However, the result list is fairly homogenous across types and it isn't easy to quickly pick out projects vs users. To help with this, add icons showing the result type.
Test Plan:
{F113079}
(The main search results get touched here too, I verified they didn't blow up.)
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran, mbishopim3
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8231
Summary:
Ref T1279. The new dual-mode user/project tokenizers are a bit disorienting. Provide content type hints.
Very open to any suggestions here, most of this patch is just getting the right data in the right places. We can change things up pretty easily.
- I like the little icons in the tokens themselves, I think they look good and are useful.
- I'm less sold on the '(Project)' thing I did in the dropdown. We can easily make this richer if you have thoughts on it -- we could put icons in the left column maybe? Or right-justify the types?
- I made it always sort users above projects.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, carl
Maniphest Tasks: T4420, T1279
Differential Revision: https://secure.phabricator.com/D7250
Summary:
Ref T2222. This restores the "N older comments are hidden." shield to all ApplicationTransactions applications. Roughly the rule this uses is that transactions older than your most recent comment are hidden, under the assumption that you've already read and dealt with them, since you replied afterward. Then we show your last comment to remind/contextualize you, and anything afterward. We also don't hide transactions if we'd only be hiding a handfull, and we never hide the few most recent transactions.
This might need some #design help.
Test Plan:
The tricky part here is the anchor rule, which deals with the case where you follow a link to `T123#4`, but that would normally be hidden. We simulate a click on "show all" if you hit an anchor which is hidden. Here's what it looks like in Maniphest:
{F112891}
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8229
Summary: Fixes T4429. Shows and allows you to click through on board links when a task appears on workboards.
Test Plan:
{F112837}
Clicked the links.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T4429
Differential Revision: https://secure.phabricator.com/D8226
Summary: Ref T2222. This merges the `tmp.differential` branch, including the
comment -> application transaction migration, to `master`.
Auditors: btrahan
Summary: Makes the line in timeline a background "image" instead.
Test Plan: Tested Desktop, Mobile, and Tablet breakpoints with lots of content.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8221
Summary: form.reset() resets a form to whatever values were present when the form was loaded into the DOM. Instead, grab all the pertinent form bits and set there values to "clear". I don't think there's too much utility in putting this somewhere more general, but it could be something like DOM.clearForm(form) or something. Fixes T3629.
Test Plan:
repro'd original issue
- open legalpad doc (or your favorite application transaction powered app)
- type in a comment but do not submit (you are creating a draft) e.g. "foo"
- reload page and note comment appears e.g. "foo"
- change comment e.g. "foobar"
- submit comment
- BUG - after submission, the comment reverts to the comment at initial page load e.g. "foo"
then after this patch, I can't repro it anymore with these steps - the comment is correctly blank
NOTE: this will need to be tested with more complicated forms.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3629
Differential Revision: https://secure.phabricator.com/D8220
Summary: Simplified header, added Workboard button and icon, moved Maniphest actions to "Open Tasks" Object Box. Reduced actions by 3.
Test Plan: Test a number of project pages, looks better, cleaner.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8219
Summary: Makes hyperlinks in phui-timeline-title one color darker, with objects in bold.
Test Plan: Tested a timeline with people, objects, and timestamps.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8214
Summary: Accidentally removed the line
Test Plan: Test mobile AND desktop
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8212
Summary:
Ref T2222. This is the big one.
This migrates each `DifferentialComment` to one or more ApplicationTransactions (action, cc, reviewers, update, comment, inlines), and makes `DifferentialComment` a double-reader for ApplicationTransactions.
The migration is pretty straightforward:
- If a comment took an action not otherwise covered, it gets an "action" transaction. This is something like "epriestley abandoned this revision.".
- If a comment updated the diff, it gets an "updated diff" transaction. Very old transactions of this type may not have a diff ID (probably only at Facebook).
- If a comment added or removed reviewers, it gets a "changed reviewers" transaction.
- If a comment added CCs, it gets a "subscribers" transaction.
- If a comment added comment text, it gets a "comment" transaction.
- For each inline attached to a comment, we generate an "inline" transaction.
Most comments generate a small number of transactions, but a few generate a significant number.
At HEAD, the code is basically already doing this, so comments in the last day or two already obey these rules, roughly, and will all generate only one transaction (except inlines).
Because we've already preallocated PHIDs in the comment text table, we only need to write to the transaction table.
NOTE: This significantly degrades Differential, making inline comments pretty much useless (they each get their own transaction, and don't show line numbers or files). The data is all fine, but the UI is garbage now. This needs to be fixed before we can deploy this to users, but it's easily separable since it's all just display code.
Specifically, they look like this:
{F112270}
Test Plan:
I've migrated locally and put things through their paces, but it's hard to catch sketchy stuff locally because most of my test data is nonsense and bad migrations wouldn't necessarily look out of place.
IMPORTANT: I'm planning to push this to a branch and then shift production over to the branch, and run it for a day or two before bringing it to master.
I generally feel good about this change: it's not that big since we were able to separate a lot of pieces out of it, and it's pretty straightforward. That said, it's still one of the most scary/dangerous changes we've ever made.
Reviewers: btrahan
CC: chad, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8210
Summary:
Updates PhabricatorTimeline to PHUITimeline. Uses standard colors and spacing, softens up the actors, and reduces visual spacing of action-only events.
- Also updated some 2x sprite images.
Test Plan: Tested Tasks Paste and Pholio in my sandbox.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8205
Summary:
Ref T2222. Ref T4415. We're still writing Differential subscription stuff into this weird legacy `differential_relationship` table, which is like an edge table but extremely ancient.
Move it into a proper table.
I've removed `withSubscriptions()` from `DifferentialRevisionQuery`. It was weird, doesn't work consistently with other similar filters, and was only used by the API. Now it means "ccs", which is consistent with the ApplicationSearch UI and with Maniphest.
Test Plan:
Without migrating, added and removed subscribers via various workflows. Queried for subscribers. Everything worked as expected.
Ran the migration, verified data survived.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222, T4415
Differential Revision: https://secure.phabricator.com/D8202
Summary:
Ref T2222. Currently, `DifferentialComment` stores both (a) the text of comments and (b) various other transaction details. This data needs to map to both Transactions and TransactionComments in the long run. This diff separates out all the data which is bound for the TransactionComment table, so that when we migrate `DifferentialComment` itself it will //only// need to migrate into the Transactions table. This is a much simpler migration than the inline comment one was, partly because it set up infrastructure and partly because the data is less complex.
Basically, I'm just proxying the read/write for the comment text into the other table. All readers already go through the Query class, and there are only three writers (preview, comment, implicit comment on diff update) which are all highly regular and straightforward to test.
We can also back out of this diff very easily: doing double writes cost only one line of code (`$this->content = $content;`) so we have proper double writes and a trivial revert path.
Test Plan:
- Without migrating, added comments and saw them show up.
- Migrated.
- Saw all the old comments, and no damage to the new ones.
- Added new comments.
- Used comment preview.
- Updated a revision to implicitly create an update comment and verified it looked OK.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8196
Summary:
Fixes T4379. Several changes:
- Migrate all project members into subscribers.
- When members are added or removed, subscribe or unsubscribe them.
- Show sub/unsub in the UI.
- Determine mailable membership of projects by querying subscribers.
Test Plan:
- As `duck`, joined a project.
- Added the project as a reviewer to a revision.
- Commented on the revision.
- Observed `duck` receive mail.
- Unsubscribed as `duck`.
- Observed no mail.
- Resubscribed as `duck`.
- Mail again.
- Joined/left project, checked sub/unsub status.
- Ran migration, looked at database.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, asherkin
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8189
Summary: ...by the surprising step of changing how this data is stored from id to phid. Also a small fix to not allow "disabled" rules to be used as herald rule conditions, i.e. can't make a rule that depends on a disabled rule.
Test Plan: viewed existing herald rule that had a rule condition and noted nice new display using handle. made a new rule that had a rule condition and verified it worked correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8186
Summary:
Ref T4379. Long ago, the "Project" vs "ProjectProfile" split was intended to allow a bunch of special fields on projects without burdening the simple use cases, but CustomField handles that far better and far more generally, and doing this makes using ApplicationTransactions a pain to get right, so get rid of it.
The only remaining field is `profileImagePHID`, which we can just move to the main Project object. This is custom enough that I think it's reasonable not to express it as a custom field.
Test Plan: Created a project, set profile, edited project, viewed in typeahead, ran migration, verified database results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8183
Summary: Ref T4379. Major goal here is to remove `ProjectProfile` so all edits use ApplicationTransactions. This also makes things more flexible, allowing users to disable this field if they don't like it.
Test Plan: Ran migration, verified data survived, edited/created projects, reordered fields.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4379
Differential Revision: https://secure.phabricator.com/D8182
Summary: Use standard spacing and colors
Test Plan: Reload pinboard home, see correct gutters and colors
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8187
Summary: Adds a handy bar full of tiny buttons. Use only when directed. Ref: T4394
Test Plan: View UI Examples.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8169
Summary:
See <https://github.com/facebook/phabricator/issues/505>. When the status/event table moved, it broke this migration, which implicitly loads statuses by loading events.
Instead, access just the row we care about.
Test Plan: Used `--apply` to apply the new version of the patch.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D8162
Summary: adds a new FIELD and a new VALUE to support this. Slightly dodgy because priorities do not have phids so we have to special case how we handle this in a few spots. Ref T4294.
Test Plan: made a new rule to get cc'd on unbreak now and wishlist tasks. verified got cc'd correctly and not cc'd correctly.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4294
Differential Revision: https://secure.phabricator.com/D8156
Summary: See IRC. This migration inadvertently depends on the columns in the commit table, because it calls `save()`, and thus broke for installs with data after we added the `importStatus` column. Since that was ~9 months after this patch, probably not many installs are affected.
Test Plan: Ran patch locally with `--apply` on data. Had user verify fix.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8152
Summary: Ref T4375. We're going to need these for a bunch of infrastructure to work.
Test Plan: Ran migrations, checked DB, used `phid.query`.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8151
Summary: Ref T4375. We never join this table, so this is a pretty straight find/replace.
Test Plan: Browsed around Calendar, verified that nothing seemed broken. Saw my red dot in other apps.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8145
Summary: Ref T3583. This doesn't add any dashboard/panel-specific code beyond headers/titles/buttons/etc., but allows you to create and view dashboards and panel skeletons.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8131
Summary: Ref T4368. We don't currently GC these tables, and the sent mail table is one of the largest on `secure.phabricator.com`. There's no value in retaining this information indefinitely. Instead, retain it for 90 days, which should be plenty of time to debug/diagnose any issues.
Test Plan: Ran `phd debug garbage`, saw it clean up a reasonable amount of data from these tables.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8127
Summary:
Fixes T4202. We have old code in MetaMTA which implements gradual backoff and maximum retries.
However, we have more general code in the task queue which does this, too. We can just use the more general stuff in the task queue; it obsoletes the specific stuff in MetaMTA, which is more complex and ran into some kind of issue in T4202.
Remove `retryCount`, `nextRetry` (obsoleted by task queue retry mechanisms) and "simulated failures" (no longer in use).
Generally, modern infrastructure has replaced these mechanisms with more general ones.
Test Plan:
- Sent mail.
- Observed unsendable mail failing in reasonable ways in the queue.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4202
Differential Revision: https://secure.phabricator.com/D8115
Summary:
Ref T156. @vlada recently implemented filename search in Diffusion, this cleans up the UI a little bit:
- Instead of showing one search box with two different buttons, let the submit buttons appear to the right of the text boxes and separate the search modes.
- Clean up the results a little bit (don't show columns which don't exist).
Test Plan: {F107260}
Reviewers: vlada, btrahan, chad
Reviewed By: chad
CC: vlada, chad, aran
Maniphest Tasks: T156
Differential Revision: https://secure.phabricator.com/D8125
Summary: This adds the app icons, cleans up css Ref T3623
Test Plan: see new icons in dropdown menu
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8124
Summary: This uses the slightly smaller icons. Not sure about the logout icon, will play with it more in the morning.
Test Plan: tested new nav on desktop and mobile.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8119
Summary:
Ref T3583. General idea here is:
- Users will be able to create `DashboardPanel`s, which are things like the jump nav, or a minifeed, or recent assigned tasks, or recent tokens given, or whatever else.
- The `DashboardPanel`s can be combined into `Dashboard`s, which select specific panels and arrange them in some layout (and maybe have a few other options eventually).
- Then, you'll be able to set a specific `Dashboard` for your home page, and maybe for project home pages. But you can also use `Dashboard`s on their own if you just like dashboards.
My plan is pretty much:
- Put in basic infrastructure for dashboards (this diff).
- Add basic create/edit (next few diffs).
- Once dashboards sort of work, do the homepage integration.
This diff does very little: you can't create dashboards or panels yet, and thus there are no dashboards to look at. This is all skeleton code, pretty much.
IMPORTANT: We need an icon bwahahahahaha
Test Plan:
omg si purrfect
{F106367}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8109
Summary: Ref T3623. These are obsoleted by the global quick-create menu, so we can simplify the app launcher.
Test Plan: Looked at app launcher, grepped for everything.
Reviewers: chad
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8104
Summary:
Ref T3623. I'm sure I didn't get the margins / drop shadow quite right, but this looks and works reasonably well:
{F105637}
Test Plan: Clicked stuff to quick create.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8089
Summary:
Moves away from ArcanistProjects:
- Adds storage for diffs to be directly associated with a repository (instead of indirectly, through arcanist projects). Not really populated yet.
- Drops `parentRevisionID`, which is obsoleted by the "Depends On" edge. This is not exposed in the UI anywhere and doesn't do anything. Resolves TODO.
Test Plan: Ran storage upgrades, browsed around, lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8072
Summary: pick a value divisible by 3 and lose the moz stuff which is outdated poo.
Test Plan: looks good (to me) still...!
Reviewers: chad, epriestley
Reviewed By: chad
CC: chad, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8062
Summary: round them there corners, to create more of a "bubble" effect in legalpad. Ref T3116.
Test Plan: see screenshot, which demonstrates new style works
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D8060
Summary: Ref T3116. I did not update the remarkup doc (yet) as I think this syntax should stay buried until the bubbler looks right
Test Plan: modified a legalpad document and verified BUBBLE: showed up and looked okay to my pitiful design skillz
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: chad, Korvin, epriestley, aran
Maniphest Tasks: T3116
Differential Revision: https://secure.phabricator.com/D8053
Summary: Fixes T3957, adds timestamps to the notifications page.
Test Plan: View my notifications page, see the new time stamps. Uncertain if I set $user correctly.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T3957
Differential Revision: https://secure.phabricator.com/D8039
Summary: Use standard 16px
Test Plan: reload feed, now aligns with search
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8038
Summary: Such fun. Many pixels. Professional PM. Much Business.
Test Plan: Move stuff in and around workboards
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8007
