Summary: Fixes T5510. This purely reduces false positives from HackerOne: we currently rotate CSRF tokens, but do not bind them explicitly to specific sessions. Doing so has no real security benefit and may make some session rotation changes more difficult down the line, but researchers routinely report it. Just conform to expectations since the expected behavior isn't bad and this is less work for us than dealing with false positives.
Test Plan:
- With two browsers logged in under the same user, verified I was issued different CSRF tokens.
- Verified the token from one browser did not work in the other browser's session.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5510
Differential Revision: https://secure.phabricator.com/D10136
Summary:
Fixes T5506. Depends on D10133. When users remove an email address or change their primary email address, invalidate any outstanding password reset links.
This is a very small security risk, but the current behavior is somewhat surprising, and an attacker could sit on a reset link for up to 24 hours and then use it to re-compromise an account.
Test Plan:
- Changed primary address and removed addreses.
- Verified these actions invalidated outstanding one-time login temporary tokens.
- Tried to use revoked reset links.
- Revoked normally from new UI panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5506
Differential Revision: https://secure.phabricator.com/D10134
Summary: Instead of implementing the `getCapabilityKey` method in all subclasses of `PhabricatorPolicyCapability`, provide a `final` implementation in the base class which uses reflection. See D9837 and D9985 for similar implementations.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D10039
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Instead of implementing the `getTypeConstant` method in all subclasses of `PhabricatorPHIDType`, provide a `final` implementation in the base class which uses reflection. See D9837 for a similar implementation.
Test Plan: Ran `arc unit`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9985
Summary: Ref T5655. The `PhabricatorDestructibleInterface` interface is misspelled as `PhabricatorDestructableInterface`. Fix the spelling mistake.
Test Plan: `grep`. Seeing as this interface is fairly recent, I don't expect that this would cause any widespread breakages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9988
Summary:
Fixes T5614. Ref T4420. Other than the "users" datasource and a couple of others, many datasources ignore what the user typed and just return all results, then rely on the client to filter them.
This works fine for rarely used ("legalpad documents") or always small ("task priorities", "applications") datasets, but is something we should graudally move away from as datasets get larger.
Add a token table to projects, populate it, and use it to drive the datasource query. Additionally, expose it on the applicationsearch UI.
Test Plan:
- Ran migration.
- Manually checked the table.
- Searched for projects by name from ApplicationSearch.
- Searched for projects by name from typeahead.
- Manually checked the typeahead response.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5614, T4420
Differential Revision: https://secure.phabricator.com/D9896
Summary:
Ref T4420. This was a performance hack introduced long ago to make typeaheads for users a little cheaper. The idea was that you could load some of an object's columns and skip other ones.
We now always load users on demand, so the cost of loading the whole objects is very small. No other use cases ever arose for this, and it seems unlikely that they will in the future. Remove it all.
Test Plan:
- Grepped for `CONFIG_PARTIAL_OBJECTS`.
- Grepped for `dirtyFields`.
- Grepped for `missingFields`.
- Grepped for `resetDirtyFields`.
- Grepped for `loadColumns`.
- Grepped for `loadColumnsWhere`.
- Grepped for `loadRawDataWhere`.
- Loaded and saved some lisk objects.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9895
Summary:
Ref T4420. If a datasource does not specify an icon explicitly, check if the PHID type has a default, and use that.
This leaves us with only Projects and some special stuff setting explicit icons, and reduces code duplication.
Test Plan: Used typeahead to find all affected object types.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9894
Summary: Ref T4420. Bring the global search up to date.
Test Plan: Typed various things into global search.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D9889
Summary: These have been moved into libphutil.
Test Plan: Browsed Phabricator, didn't see a crash.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9907
Summary:
Fixes T3732. Ref T1205. Ref T3116.
External accounts (like emails used as identities, Facebook accounts, LDAP accounts, etc.) are stored in "ExternalAccount" objects.
Currently, we have a very restrictive `CAN_VIEW` policy for ExternalAccounts, to add an extra layer of protection to make sure users can't use them in unintended ways. For example, it would be bad if a user could link their Phabricator account to a Facebook account without proper authentication. All of the controllers which do sensitive things have checks anyway, but a restrictive CAN_VIEW provided an extra layer of protection. Se T3116 for some discussion.
However, this means that when grey/external users take actions (via email, or via applications like Legalpad) other users can't load the account handles and can't see anything about the actor (they just see "Restricted External Account" or similar).
Balancing these concerns is mostly about not making a huge mess while doing it. This seems like a reasonable approach:
- Add `CAN_EDIT` on these objects.
- Make that very restricted, but open up `CAN_VIEW`.
- Require `CAN_EDIT` any time we're going to do something authentication/identity related.
This is slightly easier to get wrong (forget CAN_EDIT) than other approaches, but pretty simple, and we always have extra checks in place anyway -- this is just a safety net.
I'm not quite sure how we should identify external accounts, so for now we're just rendering "Email User" or similar -- clearly not a bug, but not identifying. We can figure out what to render in the long term elsewhere.
Test Plan:
- Viewed external accounts.
- Linked an external account.
- Refreshed an external account.
- Edited profile picture.
- Viewed sessions panel.
- Published a bunch of stuff to Asana/JIRA.
- Legalpad signature page now shows external accounts.
{F171595}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3732, T1205, T3116
Differential Revision: https://secure.phabricator.com/D9767
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary:
If the calendar app is not installed we don't show the status.
Origianlly the idea was to only show the status if the viewer had access to
the app, but for display purposes this seems fine.
Fixes T5087
Test Plan: View with and without calendar installed
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5087
Differential Revision: https://secure.phabricator.com/D9582
Summary:
We should not show the status line in the people hover card
if the calendar app has been uninstalled or is not available for the
current user.
Test Plan:
View hover card with calendar installed and uninstalled.
Make sure I see the status at the correct time.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, chad, Korvin
Maniphest Tasks: T5370
Differential Revision: https://secure.phabricator.com/D9577
Summary: Ref T4986. Instead of requiring users to know the name of an application search engine class, let them select from a list.
Test Plan:
Created a new panel.
{F165468}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9500
Summary: Fixes T5302. Allow the name `@aLiNCoLN` to identify user `@alincoln`.
Test Plan: Queried users with mixed case names.
Reviewers: btrahan, spicyj, chad
Reviewed By: spicyj
Subscribers: epriestley
Maniphest Tasks: T5302
Differential Revision: https://secure.phabricator.com/D9451
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary: Both email verify and welcome links now verify email, centralize them and record them in the user activity log.
Test Plan:
- Followed a "verify email" link and got verified.
- Followed a "welcome" (verifying) link.
- Followed a "reset" (non-verifying) link.
- Looked in the activity log for the verifications.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9284
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
Merge "Organization" and "Communication" into "Core". The split between these three was always tenuous, and this is easier to use and nicer looking on the new launcher.
Merge "Miscellaneous" into "Utilities" since they're basically the same thing.
Test Plan: Looked at app launcher.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9334
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary:
Fixes T5143. Currently, if your allowed domain is "example.com", we reject signups from "@Example.com".
Instead, lowercase both parts before performing the check.
Test Plan:
- Before patch:
- Set allowed domains to "yghe.net".
- Tried "x@yghe.net", no error.
- Tried "x@xxxy.net", error.
- Tried "x@yghE.net", incorrectly results in an error.
- After patch:
- Set allowed domains to "yghe.net".
- Tried "x@yghe.net", no error.
- Tried "x@xxxy.net", error.
- Tried "x@yghE.net", this correctly no longer produces an error.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5143
Differential Revision: https://secure.phabricator.com/D9261
Summary: Makes the mobile action menu a little nicer, adds it to /people/
Test Plan: Test myself on my install, mobile and desktop.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9259
Summary:
Ref T4398. This code hadn't been touched in a while and had a few crufty bits.
**One Time Resets**: Currently, password reset (and similar links) are valid for about 48 hours, but we always use one token to generate them (it's bound to the account). This isn't horrible, but it could be better, and it produces a lot of false positives on HackerOne.
Instead, use TemporaryTokens to make each link one-time only and good for no more than 24 hours.
**Coupling of Email Verification and One-Time Login**: Currently, one-time login links ("password reset links") are tightly bound to an email address, and using a link verifies that email address.
This is convenient for "Welcome" emails, so the user doesn't need to go through two rounds of checking email in order to login, then very their email, then actually get access to Phabricator.
However, for other types of these links (like those generated by `bin/auth recover`) there's no need to do any email verification.
Instead, make the email verification part optional, and use it on welcome links but not other types of links.
**Message Customization**: These links can come out of several workflows: welcome, password reset, username change, or `bin/auth recover`. Add a hint to the URI so the text on the page can be customized a bit to help users through the workflow.
**Reset Emails Going to Main Account Email**: Previously, we would send password reset email to the user's primary account email. However, since we verify email coming from reset links this isn't correct and could allow a user to verify an email without actually controlling it.
Since the user needs a real account in the first place this does not seem useful on its own, but might be a component in some other attack. The user might also no longer have access to their primary account, in which case this wouldn't be wrong, but would not be very useful.
Mitigate this in two ways:
- First, send to the actual email address the user entered, not the primary account email address.
- Second, don't let these links verify emails: they're just login links. This primarily makes it more difficult for an attacker to add someone else's email to their account, send them a reset link, get them to login and implicitly verify the email by not reading very carefully, and then figure out something interesting to do (there's currently no followup attack here, but allowing this does seem undesirable).
**Password Reset Without Old Password**: After a user logs in via email, we send them to the password settings panel (if passwords are enabled) with a code that lets them set a new password without knowing the old one.
Previously, this code was static and based on the email address. Instead, issue a one-time code.
**Jump Into Hisec**: Normally, when a user who has multi-factor auth on their account logs in, we prompt them for factors but don't put them in high security. You usually don't want to go do high-security stuff immediately after login, and it would be confusing and annoying if normal logins gave you a "YOU ARE IN HIGH SECURITY" alert bubble.
However, if we're taking you to the password reset screen, we //do// want to put the user in high security, since that screen requires high security. If we don't do this, the user gets two factor prompts in a row.
To accomplish this, we set a cookie when we know we're sending the user into a high security workflow. This cookie makes login finalization upgrade all the way from "partial" to "high security", instead of stopping halfway at "normal". This is safe because the user has just passed a factor check; the only reason we don't normally do this is to reduce annoyance.
**Some UI Cleanup**: Some of this was using really old UI. Modernize it a bit.
Test Plan:
- **One Time Resets**
- Used a reset link.
- Tried to reuse a reset link, got denied.
- Verified each link is different.
- **Coupling of Email Verification and One-Time Login**
- Verified that `bin/auth`, password reset, and username change links do not have an email verifying URI component.
- Tried to tack one on, got denied.
- Used the welcome email link to login + verify.
- Tried to mutate the URI to not verify, or verify something else: got denied.
- **Message Customization**
- Viewed messages on the different workflows. They seemed OK.
- **Reset Emails Going to Main Account Email**
- Sent password reset email to non-primary email.
- Received email at specified address.
- Verified it does not verify the address.
- **Password Reset Without Old Password**
- Reset password without knowledge of old one after email reset.
- Tried to do that without a key, got denied.
- Tried to reuse a key, got denied.
- **Jump Into Hisec**
- Logged in with MFA user, got factor'd, jumped directly into hisec.
- Logged in with non-MFA user, no factors, normal password reset.
- **Some UI Cleanup**
- Viewed new UI.
- **Misc**
- Created accounts, logged in with welcome link, got verified.
- Changed a username, used link to log back in.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D9252
Summary: Make `->withPHIDs(array())` throw on this query instead of selecting everything.
Test Plan: Poked around.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9210
Summary:
Updates policy, headers, typeaheads to FA over policy icons
Need advice - can't seem to place where icons come from on Typeahead? Wrong icons and wrong colors.... it is late
Test Plan:
- grepped for SPRITE_STATUS
- grepped for sprite-status
- grepped for setStatus for headers
- grepped individual icons names
Browsed numerous places, checked new dropdowns, see pudgy people.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4739
Differential Revision: https://secure.phabricator.com/D9179
Summary:
Ref T4986. One note:
- We have a separate "browse directory" capability, to provide some soft privacy for users of public installs. Respect that policy within the SearchEngine.
- Also restore some other icons I missed earlier.
Test Plan:
- Viewed people list.
- Build people panel.
- Verified people panel was just me without browse capability.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9137
Summary:
Ref T4986. Swap this in. Two minor notes:
- I adjusted the SearchEngine to add an additional constraint when the viewer isn't an admin. This mostly stops us from doing a bunch of unnecessary work.
- I fixed the settings panel to paginate (currently loads all results, slow in production).
Test Plan: Viewed logs; viewed settings panel; created a dashboard panel.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9136
Summary: Ref T5058. The use of "enum" is confusing; we mean "choose one of these specific string constants". Make this more clear.
Test Plan: Viewed each call from the web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5058
Differential Revision: https://secure.phabricator.com/D9127
Summary: Remove white app icons, no longer in use as far as grep/memory serve. These were for list hover states.
Test Plan: Rebuild sprites, celerity. Grep for appIcon use (only feed). Verify all action lists are driven by FontAwesome.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9078
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary: Fixes T4728, first pass, Make real name optional on user accounts
Test Plan: Default real name config should be false (not required). Create new user, real name should not be required. Toggle config, real name should be required. Users with no real name should be always listed by their usernames.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4728
Differential Revision: https://secure.phabricator.com/D9027
Summary: `''` is not a valid integer.
Test Plan: Used `bin/accountadmin` to turn bot flag on and off for a user.
Reviewers: btrahan, Firehed
Reviewed By: Firehed
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9046
Summary:
Ref T4749. Ref T3265. Ref T4909. Several goals here:
- Move user destruction to the CLI to limit the power of rogue admins.
- Start consolidating all "destroy named object" scripts into a single UI, to make it easier to know how to destroy things.
- Structure object destruction so we can do a better and more automatic job of cleaning up transactions, edges, search indexes, etc.
- Log when we destroy objects so there's a record if data goes missing.
Test Plan: Used `bin/remove destroy` to destroy several users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3265, T4749, T4909
Differential Revision: https://secure.phabricator.com/D8940
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary:
Ref T4843. This adds support to `javelin_tag()` for an `aural` attribute. When specified, `true` values mean "this content is aural-only", while `false` values mean "this content is not aural".
- I've attempted to find the best modern approaches for marking this content, but the `aural` attribute should let us change the mechanism later.
- Make the "beta" markers on application navigation visual only (see T4843). This information is of very low importance, the application navigation is accessed frequently, and the information is available on the application list.
- Partially convert the main navigation. This is mostly to test things, since I want to get more concrete feedback about approaches here.
- Add a `?__aural__=1` attribute, which renders the page with aural-only elements visible and visual-only elements colored.
Test Plan: {F146476}
Reviewers: btrahan, scp, chad
Reviewed By: chad
Subscribers: aklapper, qgil, epriestley
Maniphest Tasks: T4843
Differential Revision: https://secure.phabricator.com/D8830
Summary:
Fixes T4917. Currently, if a user doesn't have access to, e.g., Phriction, they still get a checkbox in the search results to search for Wiki Documents. Those results will be filtered anyway, so this is confusing at best.
Instead, bind PHID types to applications. This is a relatively tailored fix; some areas for potential future work:
- Go through every PHID type and bind them all to applications. Vaguely nice to have, but doesn't get us anything for now.
- If no searchable application is installed, we don't show you an error state. This isn't currently possible ("People" is always installed) but in the interest of generality we could throw an exception or something at least.
- The elasticserach thing could probably constrain types to visible types, but we don't have a viewer there easily right now.
Test Plan: Uninstalled Phriction, saw the checkbox vanish.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4917
Differential Revision: https://secure.phabricator.com/D8904
Summary:
Ref T4398. Allows auth factors to render and validate when prompted to take a hi-sec action.
This has a whole lot of rough edges still (see D8875) but does fundamentally work correctly.
Test Plan:
- Added two different TOTP factors to my account for EXTRA SECURITY.
- Took hisec actions with no auth factors, and with attached auth factors.
- Hit all the error/failure states of the hisec entry process.
- Verified hisec failures appear in activity logs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8886
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. Ref T4842. I want to let users review their own account activity, partly as a general security measure and partly to make some of the multi-factor stuff easier to build and debug.
To support this, implement modern policies and application search.
I also removed the "old" and "new" columns from this output, since they had limited utility and revealed email addresses to administrators for some actions. We don't let administrators access email addresses from other UIs, and the value of doing so here seems very small.
Test Plan: Used interface to issue a bunch of queries against user logs, got reasonable/expected results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: keir, epriestley
Maniphest Tasks: T4842, T4398
Differential Revision: https://secure.phabricator.com/D8856
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: Fixes T4903. At some point maybe-soonish we should maybe go make `"device" => true` the default, and put `"device" => "hella-busted"` on the remaining bad pages.
Test Plan: L@@K @ W/ iOS Simulator
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley, k
Maniphest Tasks: T4903
Differential Revision: https://secure.phabricator.com/D8863
Summary: Fixes T4606. Also shortens two unusual type names which are currently inconsistent.
Test Plan: Expanded advanced search.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4606
Differential Revision: https://secure.phabricator.com/D8853
Summary:
Ref T4830. A few methods, like `conduit.ping`, are callable without authentication, so this even has some use cases. Also:
- Make some Differential stuff a little more consistent.
- Use slightly more modern rendering.
- Deprecate the status-oriented `user` calls; these will be replaced by Calendar methods.
Test Plan: Browsed console as logged out / logged in users.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4830
Differential Revision: https://secure.phabricator.com/D8826
Summary:
When we generate account tokens for CSRF keys and email verification, one of the inputs we use is the user's password hash. Users won't always have a password hash, so this is a weak input to key generation. This also couples CSRF weirdly with auth concerns.
Instead, give users a dedicated secret for use in token generation which is used only for this purpose.
Test Plan:
- Ran upgrade scripts.
- Verified all users got new secrets.
- Created a new user.
- Verified they got a secret.
- Submitted CSRF'd forms, they worked.
- Adjusted the CSRF token and submitted CSRF'd forms, verified they don't work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8748
Summary:
Ref T4371. Ref T4699. Fixes T3994.
Currently, we're very conservative about sending errors back to users. A concern I had about this was that mistakes could lead to email loops, massive amounts of email spam, etc. Because of this, I was pretty hesitant about replying to email with more email when I wrote this stuff.
However, this was a long time ago. We now have Message-ID deduplication, "X-Phabricator-Sent-This-Mail", generally better mail infrastructure, and rate limiting. Together, these mechanisms should reasonably prevent anything crazy (primarily, infinite email loops) from happening.
Thus:
- When we hit any processing error after receiving a mail, try to send the author a reply with details about what went wrong. These are limited to 6 per hour per address.
- Rewrite most of the errors to be more detailed and informative.
- Rewrite most of the errors in a user-facing voice ("You sent this mail..." instead of "This mail was sent..").
- Remove the redundant, less sophisticated code which does something similar in Differential.
Test Plan:
- Using `scripts/mail/mail_receiver.php`, artificially received a pile of mail.
- Hit a bunch of different errors.
- Saw reasonable error mail get sent to me.
- Saw other reasonable error mail get rate limited.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3994, T4371, T4699
Differential Revision: https://secure.phabricator.com/D8692
Summary: Fixes T3047. Update this document and remove some lies ("menu bar is read in admin interfaces"!!!!).
Test Plan:
- Read text.
- Searched for "System Agent" in the UI and replaced it with "bot" or "bot/script" or similar.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3047
Differential Revision: https://secure.phabricator.com/D8675
Summary:
Fixes T4065. This divides user creation into separate "Standard User" and "Script/Bot" workflows which show only relevant fields and provide guidance.
This fixes the verification mess associated with script/bot users by verifying their email addresses automatically.
Test Plan:
- Created a standard user.
- Created a script/bot.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8674
Summary: Ref T4065. Moves the last of the weird alternate edit UI to profiles. The old "Edit" controller is now for creation only, and the funky pencil icon is gone.
Test Plan: Created accounts; sent welcome email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8670
Summary: Ref T4065. Give administrators an "Edit Settings" link from profiles, which allows selective edit of settings panels. Enable Conduit, SSH Keys, and VCS Password.
Test Plan:
- Used these panels for a bot.
- Used these panels on my own account.
- Tried to use these panels for a non-bot account, was denied.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8668
Summary: Ref T4065. Moves the "disable / enable" and "make / unmake administrator" actions to profiles.
Test Plan: Disabled and enabled users, and made and unmade administrators.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8666
Summary:
Ref T4065. Currently, we have this super copy/pasted "edit profile picture" UI for system agents.
Instead, give administrators direct access from profiles, so they can use the same code pages do.
Test Plan: Edited my profile picture and profile details. Edited an agent's. Was unable to edit a non-agent user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8664
Summary: Ref T4065. Make this work in a more standard way which administrators have a reasonable shot at finding and using. See D8662 for discussion.
Test Plan: Changed a user's username.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8663
Summary:
Ref T4065. The existence of two separate edit workflows for users is broadly confusing to administrators.
I want to unify user administration and improve administration of system agent accounts. Particularly, I plan to:
- Give administrators limited access to profile editing of system agents (e.g., change profile picture).
- Give administrators limited access to Settings for system agents.
- Broadly, move all the weird old special editing into standard editing.
Test Plan:
- Hit all the errors (delete self, no username, wrong username).
- Deleted a user.
- Visited page as a non-admin, got 403'd.
- Viewed old edit UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8662
Summary:
Ref T1049. Fixes T4602. Moves all the funky field stuff to CustomField. Uses ApplicationTransactions to apply and record edits.
This makes "artifact" fields a little less nice (but still perfectly usable). With D8599, I think they're reasonable overall. We can improve this in the future.
All other field types are better (e.g., fixes weird bugs with "bool", fixes lots of weird behavior around required fields), and this gives us access to many new field types.
Test Plan:
Made a bunch of step edits. Here's an example:
{F133694}
Note that:
- "Required" fields work correctly.
- the transaction record is shown at the bottom of the page.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4602, T1049
Differential Revision: https://secure.phabricator.com/D8600
Summary:
Request from @csilvers. When approving users, the primary email address is useful for administrators.
(This queue is only accessible by administrators, so this doesn't expose email information in general.)
Test Plan: {F132912}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: shadowhand, csilvers, epriestley
Differential Revision: https://secure.phabricator.com/D8589
Summary: Fixes T4665. The "attachable" logic was a little off after a recent change.
Test Plan: With and without a profile image, viewed a page.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4665
Differential Revision: https://secure.phabricator.com/D8594
Summary: Ref T4400. Same deal as projects. Tweaked the CSS a touch to make it look better in these views.
Test Plan: Viewed /people/.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T4400
Differential Revision: https://secure.phabricator.com/D8571
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary:
Via HackerOne. In regular expressions, "$" matches "end of input, or before terminating newline". This means that the expression `/^A$/` matches two strings: `"A"`, and `"A\n"`.
When we care about this, use `\z` instead, which matches "end of input" only.
This allowed registration of `"username\n"` and similar.
Test Plan:
- Grepped codebase for all calls to `preg_match()` / `preg_match_all()`.
- Fixed the ones where this seemed like it could have an impact.
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8516
Summary:
The People application shows users awaiting approval, but incorrectly counts disabled users (i.e., users who were not approved).
Instead, count only non-disabled, non-approved users.
Test Plan: My homepage count dropped from 4 to 1, corresponding to the actual number of accounts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, spicyj
Differential Revision: https://secure.phabricator.com/D8486
Summary:
There are quite a few tests in Arcanist, libphutil and Phabricator that do something similar to `$this->assertEqual(false, ...)` or `$this->assertEqual(true, ...)`.
This is unnecessarily verbose and it would be cleaner if we had `assertFalse` and `assertTrue` methods.
Test Plan: I contemplated adding a unit test for the `getCallerInfo` method but wasn't sure if it was required / where it should live.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8460
Summary:
Ref T2222. Currently, Differential has a fairly hairy piece of logic to parse object lists, like `Reviewers: alincoln, htaft`. Extract, generalize, and cover this.
- Some of the logic can be simplified with modern ObjectQuery stuff.
- Make `@username` the formal monogram for users.
- Make `list@domain.com` the formal monogram for mailing lists.
- Add test coverage.
Test Plan:
- Ran unit tests.
- Called `differential.parsecommitmessage` with a bunch of real-world inputs and got sensible results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8445
Summary: Ref T4570. Add trivial assertions to tests which fail-by-exploding so we can fail tests with no assertions.
Test Plan: Ran `arc unit --everything` with Arcanist patched to fail with no assertions.
Reviewers: leebyron, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4570
Differential Revision: https://secure.phabricator.com/D8436
Summary:
Ref T2222. This isn't complete and doesn't change runtime behavior yet (the new fields are not glued to the interface), but implements many fields.
(The remaining fields have something weird going on with them, for the most part.)
Test Plan:
With additional changes, rendered most fields sensibly:
{F118834}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8354
Summary:
Ref T2222. Ref T3886. Ref T418. A few changes:
- CustomField can now index into global search.
- Use CustomField fields instead of older custom fields for Differential global search. (This slightly breaks any custom fields which exist, but they are presumably very rare, and probably do not exist; this break is also very mild.)
- Automatically perform CustomField and Subscribable indexing on applicable object types.
Test Plan: Used `bin/search index` to reindex a bunch of stuff, then searched for it. Debug-dumped abstract documents to inspect them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418, T3886, T2222
Differential Revision: https://secure.phabricator.com/D8346
Summary: D8341 was a good start. However, I was looping through all the statuses each time, when I should only deal with a given status once. Instead, unset() a status from the list of statuses once we handled it. Also, delete the last old $key thing, which interfered with my chosen strategy.
Test Plan: made a two day event and verified it showed up in just those two days. (will push and test again just in case but this should be it)
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8342
Summary:
...maybe anyway because I can't reproduce it live. This diff does two things that should help with bugginess though - uses $viewer rather than $user (...$user is who we are looking at...) *AND* upgrades a Conpherence util class to Calendar, and said util class has unit tests and came about from fixing a similar bug in Conpherence back in the day.
Wrote some comments in the util class because I think it has a tendency to trip people up. These comments are not partciularly good however.
Test Plan: viewed user profile - looked good. viewed conpherence - looked good. ran unit tests - they passed. (note I would also like to push this live and verify Chad's profile is fixed on secure.phabricator.com)
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8341
Summary:
Does a handful of things to make Calendar significantly more useful
- Enabled overlapping events
- Profile has a 'week view' of the user
- Profile has a 'month view' of the users
- Multiple users on a calendar are color coded
- Browse view slightly more useful
This stops short of implementing the new 'home' view on Calendar, mostly this is a big step though to make that happen next.
Test Plan: Make lots of events on diffent users.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T2897, T4375
Differential Revision: https://secure.phabricator.com/D8317
Summary: Put a very rough filter on what we'll accept as an email address. We can expand this if anyone is actually using local delivery or other weird things. This is mostly to avoid a theoretical case where some input is parsed differently by `PhutilAddressParser` and the actual mail adapter, in some subtle hypothetical way. This should give us only "reasonable" email addresses which parsers would be hard-pressed to trip up on.
Test Plan: Added and executed unit tests. Tried to add silly emails. Added valid emails.
Reviewers: btrahan, arice
Reviewed By: arice
CC: arice, chad, aran
Differential Revision: https://secure.phabricator.com/D8320
Summary:
Via HackerOne. An attacker can bypass `auth.email-domains` by registering with an email like:
aaaaa...aaaaa@evil.com@company.com
We'll validate the full string, then insert it into the database where it will be truncated, removing the `@company.com` part. Then we'll send an email to `@evil.com`.
Instead, reject email addresses which won't fit in the table.
`STRICT_ALL_TABLES` stops this attack, I'm going to add a setup warning encouraging it.
Test Plan:
- Set `auth.email-domains` to `@company.com`.
- Registered with `aaa...aaa@evil.com@company.com`. Previously this worked, now it is rejected.
- Did a valid registration.
- Tried to add `aaa...aaaa@evil.com@company.com` as an email address. Previously this worked, now it is rejected.
- Did a valid email add.
- Added and executed unit tests.
Reviewers: btrahan, arice
Reviewed By: arice
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D8308
Summary:
Ref T3886. Broadly, fields break down into two types right now: fields which store data on the object (like `DifferentialTitleField`) and fields which store data in custom field storage.
The former type generally reads data from the object into local storage prior to editing, then writes it back afterward. Currently, this happens in `didSetObject()`.
However, now that we load and set objects from ApplicationTransactionQuery, we'll do this extra read-field-values on view interfaces too. There, it's unnecessary and sometimes throws data-attached exceptions.
Instead, separate these concepts, and do all the read-from-object / read-from-storage in one logical chunk, separate from `didSetObject()`.
Test Plan:
- Edited Differential revision.
- Edited Maniphest task.
- Edited Project.
- Edited user profile.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886
Differential Revision: https://secure.phabricator.com/D8299
Summary:
Ref T4443. Make hashing algorithms pluggable and extensible so we can deal with the attendant complexities more easily.
This moves "Iterated MD5" to a modular implementation, and adds a tiny bit of hack-glue so we don't need to migrate the DB in this patch. I'll migrate in the next patch, then add bcrypt.
Test Plan:
- Verified that the same stuff gets stored in the DB (i.e., no functional changes):
- Logged into an old password account.
- Changed password.
- Registered a new account.
- Changed password.
- Switched back to master.
- Logged in / out, changed password.
- Switched back, logged in.
- Ran unit tests (they aren't super extensive, but cover some of the basics).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kofalt
Maniphest Tasks: T4443
Differential Revision: https://secure.phabricator.com/D8268
Summary:
Ref T1279. The new dual-mode user/project tokenizers are a bit disorienting. Provide content type hints.
Very open to any suggestions here, most of this patch is just getting the right data in the right places. We can change things up pretty easily.
- I like the little icons in the tokens themselves, I think they look good and are useful.
- I'm less sold on the '(Project)' thing I did in the dropdown. We can easily make this richer if you have thoughts on it -- we could put icons in the left column maybe? Or right-justify the types?
- I made it always sort users above projects.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, carl
Maniphest Tasks: T4420, T1279
Differential Revision: https://secure.phabricator.com/D7250
Summary:
Ref T4379. Fixes T4359. Currently, `bin/search index` does not rebuild CustomField indexes. This is because they aren't really part of the main search index. However, from a user's point of view this is by far the most logical place to look for index rebuilds, and it's straightforward for us to write into this secondary store.
At some point, it might be nice to let you specify fields as "fulltext" too, although no one has asked for that yet. We could then dump the text of those fields into the fulltext index. Ref T418.
Test Plan: Used `bin/search index --type proj --trace`, etc., and examination of the database to verify that indexes rebuilt. Reindexed users, tasks, projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4359, T418, T4379
Differential Revision: https://secure.phabricator.com/D8185
Summary: Ref T4375. We never join this table, so this is a pretty straight find/replace.
Test Plan: Browsed around Calendar, verified that nothing seemed broken. Saw my red dot in other apps.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4375
Differential Revision: https://secure.phabricator.com/D8145
Summary: Ref T4365. Two diffs from now, I'm changing the UI a bit to let you search for closed and unowned documents more explcitly. To support this in ElasticSearch and more easily in MySQL search, make these explicit, positive relationships.
Test Plan: `bin/search index --all`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4365
Differential Revision: https://secure.phabricator.com/D8122
Summary:
Fixes T4368. This is the last "obvious" table we have which we should be GC'ing but do not. It's about 1/12th of the data on `secure.phabricator.com`.
This table stores logins, account creation, password resets, login attempts, etc, and is primarily useful if something sketchy happens so you can go back and review login activity. This data is not useful indefinitely, and there's no reason to retain it forever. Because you don't always know when something sketchy happened I've given this table a fairly long TTL (180 days), but we don't need limitless amounts of this data.
Test Plan: Ran `phd debug garbage` and saw a reasonable amount of data get GC'd. This table already has an appropriate key.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4368
Differential Revision: https://secure.phabricator.com/D8128
Summary: This uses the slightly smaller icons. Not sure about the logout icon, will play with it more in the morning.
Test Plan: tested new nav on desktop and mobile.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8119
Summary:
Fixes T4358. User request from IRC, but I think this is generally reasonable.
Although we can not prevent users from determining that other user accounts exist in the general case, it does seem reasonable to restrict browsing the user directory to a subset of users.
In our case, I'll probably do this on `secure.phabricator.com`, since it seems a little odd to let Google index the user directory, for example.
Test Plan: Set the policy to "no one" and tried to browse users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4358
Differential Revision: https://secure.phabricator.com/D8112
Summary:
Ref T3623. This is like a pre-v0, in that it doesn't have a dropdown yet.
Clicking the button takes you to a page which can serve as a right click / mobile / edit target in the long run, but is obviously not great for desktop use. I'll add the dropdown in the next iteration.
Test Plan: {F105631}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3623
Differential Revision: https://secure.phabricator.com/D8088
Summary: Super old method which is completely obsoleted by `user.query`
Test Plan: Poked around web UI, ran method.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8071
Summary: Fixes T4339. If you're anonymous, we use a digest of your session key to generate a CSRF token. Otherwise, everything works normally.
Test Plan: Logged out, logged in, tweaked CSRF in forms -- I'll add some inlines.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4339
Differential Revision: https://secure.phabricator.com/D8046
