Summary: Ref T10010. Allows you to click "Milestone 99" to jump directly to that project.
Test Plan:
- Clicked milestone header, went to milestone.
- Clicked normal column header, nothing happened. Wow!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15204
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. Milestones can't have subprojects, so this item isn't very useful.
I think there is also an argument for disabling "Members", but that panel is a little less useless and explains the membership rule, so I'm less certain about removing it. I do generally lean toward removing it at some point, though.
Test Plan:
- Viewed a milestone, no "Subprojects" menu item.
- Viewed a normal project, saw item.
- Edited both menus, saw consistent UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15200
Summary:
When filling in filler projects, only select active ones.
Also use a slightly more modern method signature.
Test Plan: Disabled a project, saw it vanish from the control.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15199
Summary:
Ref T10010. Instead of autojoining projects, provide "Initial Members: [___]" that the user can fill in.
This is only available in the web UI when creating a (non-milestone) project.
Test Plan:
- Created a new project with no members.
- Created a new project with some members.
- Created a new milestone (no control).
- Created a new project with myself as a member and an "Editable By: Project Members" policy, to verify this use case still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15195
Summary: Show on hovercards and the profile page itself.
Test Plan: Review a Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15193
Summary: Minor, just fall back to the grey icon in all cases (too much color for me).
Test Plan: Review a Project and a Profile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15190
Summary:
Ref T10289. This probably doesn't cover everything but should do a little bit better.
Although we should mabye just exlude milestones from this menu completely?
Test Plan: {F1093937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10289
Differential Revision: https://secure.phabricator.com/D15191
Summary:
Fixes T10287. Ref T10286.
- Link stuff properly.
- Generally, show "Parent (Milestone)" instead of "Milestone".
- This probably doesn't get 100% of `getName()` -> `getDisplayName()` swaps, but we can get those as we catch them.
Test Plan: See T10286. Also clicked stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10286, T10287
Differential Revision: https://secure.phabricator.com/D15189
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary: Fixes T10281. Adds the closed icon (resolved, dupe, ect) as an attribute and makes the text grey again.
Test Plan:
View workboard with "All Tasks"
{F1092738}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10281
Differential Revision: https://secure.phabricator.com/D15187
Summary:
Ref T10010.
- Don't allow milestones to be reordered.
- Hide phantom subproject columns when reodrering.
- Don't allow subproject/milestone columns to be renamed.
- Force milestones to be ordered at the end, and in the correct order.
- Add some missing crumbs.
Test Plan: Reordered columns, renamed columns, made a new column, viewed column details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15183
Summary: Ref T10010. This gets rid of, e.g., the "Iteration I" tag in the column for that milestone, as it is redundant with the column itself.
Test Plan: {F1090427}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15181
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: Ref T10010. This isn't totally comprehensive, and a lot of behaviors aren't testable (e.g., all the Javascript stuff) but at least covers the basic create/move/reorder operations.
Test Plan: `arc unit`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15178
Summary: Ref T10010. This retires the old way of doing things inside ColumnPositionQuery. It is now obsolete and lives in BoardLayoutEngine instead.
Test Plan:
- Moved cards, created cards, swapped filters, orders, etc.
- Some degree of unit testing coming in the next diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15177
Summary: Ref T10010. This gets rid of the last dependency on the weird ColumnPositionQuery code.
Test Plan:
- Viewed workboards.
- Used batch editor.
- Created a new workboard.
- Dragged stuff around.
- Created new tasks into columns.
- Changed order from natural to priority, dragged things around.
- Switched filter to custom filter, "all tasks", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15176
Summary:
Ref T10010. See D15174. This gets rid of the "actually apply the change" callsite and moves it to layout engine.
Next up is to make the board view use the layout engine, then throw away all the whack code in ColumnPositionQuery, then move forward with D15171.
Test Plan:
- Dragged tasks within a column.
- Dragged tasks between columns.
- Dragged tasks to empty columns.
- Created a task in a column.
- Swapped board to priority sort, dragged a bunch of stuff all over.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15175
Summary:
Ref T10010. This is a precursor to D15171, which I'll eventually rebuild on top of these changes.
Currently, ColumnPositionQuery does a lot of "column layout" stuff that's very similar to the Milestone/Subproject stuff that needs to happen in D15171. The current approach there ended up splitting this layout stuff across two unrelated classes (ColumnPositionQuery + BoardViewController), neither of which is a particularly great place to do it -- the Query is too low-level, and the Controller is too high-level.
Instead, introduce a new "LayoutEngine" which does all this layout stuff. Swap two of the four places that we query this stuff over to the new engine:
- "Project (Column)" on tasks.
- Transaction generation when moving cards.
These sites aren't swapped by this diff, but will be by the next one:
- Actually applying transactions.
- Main layout for boards (this could swap easily now, but applying transactions currently relies on position writes having taken place, so it can't swap until the other one swaps).
Once everything is swapped over, I should be able to add the D15171 logic to LayoutEngine instead of BoardViewController and end up with a cleaner approach overall.
One particularly benefit is that //looking// at a board won't do a bunch of position writes anymore, which wasn't a big deal, but which I was a bit uneasy with.
Test Plan:
- Viewed tasks that are on boards, saw column annotations in project list.
- Moved cards between columns on a board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15174
Summary: I don't think these ever had hovercards, but they should with subprojects/new design.
Test Plan: pointey pointey, got a card
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15180
Summary:
Ref T10010. When you try to add "Sprint 35" to a task, remove "Sprint 34", etc. Briefly:
- A task can't be in Sprint 3 and Sprint 4.
- A task can't be in "A" and "A > B" (but "A > B" and "A > C" are fine).
- When a user makes an edit which would violate one of these rules, preserve the last tag in each group of conflicts.
Test Plan:
- Added fairly comprehensive tests.
- Added a bunch of different tags to things, saw them properly exclude conflicting tags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15167
Summary:
Ref T5240.
- Add proper class when dropping cards.
- Add proper class when creating new cards.
- Make X-drag explicit so that it works if there's only one column.
- Stop tootips when dragging, resume them after dropping.
- Move CSS rule for consistency.
- Allow user to hit "Escape" to cancel an in-progress drag.
Test Plan:
- Dropped cards.
- Created new cards.
- X-dragged on a workboard with one column and a dashboard.
- Dragged over a tooltip (no tip), dropped, moused over tooltip (tip).
- Hit escape during a drag.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15163
Summary:
Ref T5240. With the new approach, the draggable clones lose their containers, so they don't get affected by rules like `.container .item`.
Put classes on the cards/items and use `.board-item.item` and `.standard-item.item` to apply rules instead.
This didn't turn out //too// gross, and seems relatively OK / not obviously broken.
Test Plan:
- Dragged cards on a workboard.
- Dragged items in normal lists (tasks, pinned apps).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15161
Summary: Reworks cards to add an assignee head and tooltip on workboards. This feels like a reasonable starting point, but they may move depending on feedback.
Test Plan:
View a lot of boards. Assign and unassign a task.
{F1085739}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Luke081515.2, Korvin
Differential Revision: https://secure.phabricator.com/D15158
Summary: Ref T10010. Restores subprojects and milestones to the UI with a more modern style and more warnings.
Test Plan:
{F1085207}
{F1085208}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15152
Summary:
Fixes T10250.
Rename the one I added to `hasAnyProperties()` for clarity.
Test Plan:
- Viewed a project profile with content.
- Viewed a project profile with no properties.
- Viewed a workboard with tasks that had a mixture of additional projects and no additional projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10250
Differential Revision: https://secure.phabricator.com/D15151
Summary: It feels wierd to edit a project or profile and not see the changes. For now add them back to the Manage page.
Test Plan: Edit a Profile, Edit a Project. See updates on Manage page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15140
Summary:
- Redirect to profileview when new image is uploaded.
- Add ProfileNav to EditPicture on Profile
- Add ProfileNav to EditProfile on Profile
Test Plan: Set new images on Profiles and Projects. See new redirect. See new navs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15132
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary:
- Better spacing for images
- Remove border
- White BG on Members page
Test Plan: Review Projects / Project Home / Project Members
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15118
Summary: Fixes T10213. I think the "Edit" item was originally conditional (or maybe I just forgot to add that part), but that got dropped when we swapped how it worked. This is all stable now anyway and can be available without needing prototypes enabled.
Test Plan: Edited a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10213
Differential Revision: https://secure.phabricator.com/D15117
Summary: Cleans up Workboards to match the mocks. No new functionality, just more consistent colors/spacing/common components.
Test Plan:
Visit a few workboards, drag and drop items. Mobile, Tablet, Desktop
{F1070733}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15115
Summary: Ref T10054. Prevent users from removing this item and locking themselves out of the system unless they can guess the URI.
Test Plan: Tried to disable "Manage", wasn't permitted to.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15113
Summary: Minor point of polish, but feels really nice. Hover over photo and edit a link to change the picture.
Test Plan:
hover hover, clicky clicky
{F1069179}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15109
Summary:
Ref T10144. This isn't comprehensive, but we can give it a try and see how it feels?
- EditEngine forms now say "Tags" instead of "Projects".
- Modern SearchEngine forms now say "Tags" instead of "Projects".
- For clarity, replaced as much "in project" language as I could find with "tagged with project" language.
Test Plan: reading / grepping + used "not tagged with any project" token
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10144
Differential Revision: https://secure.phabricator.com/D15108
Summary: Fixes T6501. This adds more API information to the newish `project.search` API method.
Test Plan: Called `project.search`, used attachments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6501
Differential Revision: https://secure.phabricator.com/D15105
Summary: Ref T10054. This primarily improves aesthetics and consistency for member/wathcher lists in projects.
Test Plan:
{F1068873}
{F1068874}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15103
Summary: Moves some profile css into PHUI, cleans up mobile view and desktop spacing.
Test Plan: Test Project at desktop and mobile breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15106
Summary: Ref T10054.
Test Plan:
{F1068420}
Also looked at a project which did have stuff to make sure the stuff still worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15102
Summary:
First pass at a new Project Home page. This is starting to sprawl, so punting this up now before it gets too large.
- Project homes now have "large header"
- Custom Fields / Descriptions are in the main column
- Feed is simpler visually
- new "Background" option for PHUIObjectBoxView
- move header buttons globally to "Grey" instead of "Simple"
- New color and hover states for "Grey"
- Transitions on Buttons haha
- Edit Icon on Nav is now under "Manage" panel
- New "Manage" Panel
TODO:
- More testing of bad cases of Custom Fields
- Members Page in flux, needs design
- Um still not sure how to make Custom Field not show UI
Test Plan:
Lots of random Project page visits. Save project, watch project, edit project, etc.
{F1068191}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15097
Summary: Ref T10054. Since we no longer have the "workboard default if it exists" rule, provide a quick way to make it the default.
Test Plan: Created a new workboard with the box checked, saw menu change appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15092
Summary:
Ref T10054. Ref T6961.
- Existing projects with workboards had "Workboard" as the default menu item. Retain this behavior.
- Populate the recently-added `hasWorkboard` flag so we can do a couple of things a little faster (see T6961).
Test Plan:
- Ran migration.
- Verified a bunch of projects looked sensible/correct after the migration.
- Created a workboard, verified `hasWorkboard` got set properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15093
Summary:
Ref T10054. Uncreated workboards feel a little awkward right now because you lose the menu. Instead, keep the menu.
I also plan to:
- add a "[X] Make the workboard the default view for this project." checkbox; and
- resolve T6961.
...which will touch this workflow, so modernize/straighten it out.
Test Plan:
Viewed workboard, no access state, empty state. Created empty board, imported board.
{F1066973}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15091
Summary: Ref T10054. This is all pretty straightforward. Also include some project-specific examples in the project documentation.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15090
