Summary:
Ref T5317. General idea here is that Dashboards are replacing the home page soon. We think they'll do a good job for normal users, but they aren't very good for new administrators who have just completed an install. In this case, any dashboard we put there by default will be empty and not very useful or helpful. It's also technically a bit messy to build objects by default.
Instead, give new administrators a "Quest Tracker" UI to help them get through things. When they're done with setup steps, they build a dashboard and install it to replace the home page. They can add install-specific welcome messages during this process, so hopefully this will also ease onboarding for non-administrator users.
For now, you have to go to Config > Welcome Screen explicitly to see this UI. We can tweak/test it for a bit before replacing the home page.
Test Plan: {F169226}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5317
Differential Revision: https://secure.phabricator.com/D9660
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary: I could just add these options to my local configuration, but I figured I'd submit these upstream since they are (in my opinion) fairly common file formats.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9319
Summary: After T2039, it makes sense to syntax highlight `.arclint` files as JSON.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9305
Summary: Did a more exhaustive grep on setIcon and found 99.9% of the icons.
Test Plan: I verified icon names on UIExamples, but unable to test some of the more complex flows visually. Mostly a read and replace.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9088
Summary: This doesn't look like it is spelled correctly.
Test Plan: Seems more correct now.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9043
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary: There was a typo.
Test Plan: Now there is no typo.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8995
Summary:
This is just a general review of config options, to reduce the amount of damage a rogue administrator (without host access) can do. In particular:
- Fix some typos.
- Lock down some options which would potentially let a rogue administrator do something sketchy.
- Most of the new locks relate to having them register a new service account, then redirect services to their account. This potentially allows them to read email.
- Lock down some general disk stuff, which could be troublesome in combination with other vulnerabilities.
Test Plan:
- Read through config options.
- Tried to think about how to do evil things with each one.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8928
Summary: Fixes T4916. Although every normal build of PHP has this in the core, at least one distribution which users could reasonably encounter does not.
Test Plan: Changed string to "ctypex", got setup warning. Changed to "ctype", got no warning.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4916
Differential Revision: https://secure.phabricator.com/D8896
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary: A small but appreciable number of users find flavor on buttons confusing. Remove this flavor. This retains flavor in headers, error messages, etc., which doesn't cause confusion.
Test Plan: Looked at a revision, task, paste, macro, etc.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8812
Summary: I haven't been able to understand why this isn't set by default in production environments (since it is recommended to do so anyway).
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8743
Summary:
Fixes T4773. For config settings of type `list<string>`, `set`, or `list<regex>`, the "defaults" table and "examples" aren't always in the same format you should actually use when changing the setting.
This is pretty confusing. Instead, always show the settings in the desired format. For example, if the user should enter a newline-separated list, show them a newline separated list.
Test Plan:
- Grepped for `list<string>`, `list<regex>`, and `'set'`; verified all the config had the right example format (most already did).
- Viewed config settings of various kinds, including custom settings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4773
Differential Revision: https://secure.phabricator.com/D8725
Summary: Fixes T1812. Moves the internal configuration into public space and documents it.
Test Plan:
- Tried to set it to some invalid stuff.
- Set it to various valid things.
- Browsed around, changed statuses, filtered statuses, viewed statuses, merged duplictes, examined transaction record, created tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8585
Summary: This can be used to lock yourself out of an instance, so prevent web edits.
Test Plan: Loaded page, wasn't web-editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8572
Summary:
- Point them at the new Diviner.
- Make them a little less cumbersome to write.
Test Plan: Found almost all of these links in the UI and clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8553
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary: Ref T2222. These no longer have an effect, and are obsoleted by `differential.fields`.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8468
Summary:
A user reported this stack trace:
http://pastebin.com/6auGbZsE
...on this GitHub issue:
https://github.com/facebook/phabricator/issues/389#issuecomment-36612511
The problem is similar to the original report, but not identical. In this case, we're following a sequence of steps like:
- Run setup checks.
- Check for enabled providers, in order to raise "no providers configured yet" warning.
- Try to generate login/redirect URIs.
- Build the request.
- Set the default base URI.
- Run normal code.
Since we try to generate URIs before we provide a default, this fatals. Instead, don't try to build objects.
An alternative fix might be to try to set defaults earlier, but we depend on some config and on building the Request in order to be able to figure out if a request is HTTP or HTTPS right now. We could assume one, or guess, or use protocol-relative URIs (`///host.com`), but I think this fix is a little cleaner overall. If we keep hitting similar stuff, we could look into alternate fixes.
We could also set some kind of "setup mode" flag and make `getURI()` if it's called during setup mode to detect these during testing. I'd like to hit one more of these before doing that, though.
Test Plan: Reproduced the issue, applied the patch, verified this fixes it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8395
Summary: Ref T2222. This will probably have some rough edges for a bit (e.g., weird cases I didn't remember or think of), but there's no change to the underlying data and we can easily revert if things get too messy.
Test Plan: Looked at a variety of revisions and saw sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8361
Summary:
See D8308. Enabling STRICT_ALL_TABLES prevents this entire class of error, by fataling on truncation instead of truncating. We never want truncation; it is always bad and sometimes extremely bad.
We've recommended this mode for developer installs for a long time, and some users run with it enabled, so it's very unlikely to cause any issues (I've had it enabled locally for at least 6-8 months, I think).
Test Plan:
- Disabled mode.
- Saw warning.
- Enabled mode.
- No warning.
{F117040}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran, arice
Differential Revision: https://secure.phabricator.com/D8309
Summary:
Ref T3886. Ref T418. For fields like "Summary" and "Test Plan" where changes can't be summarized in one line, allow CustomField to provide a "(Show Details)" link and render a diff.
Also consolidate some of the existing copy/paste, and simplify this featuer slightly now that we've move to dialogs.
Test Plan:
{F115918}
- Viewed "description"-style field changes in phlux, pholio, legalpad, maniphest, differential, ponder (questions), ponder (answers), and repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T418
Differential Revision: https://secure.phabricator.com/D8284
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary:
From @chad. This setup link should open in a new window so you don't lose your context in resolving setup issues.
@chad, this was the only one I could find immediately, let me know if you remember seeing others that I missed.
Test Plan: Faked an error, clicked the link, got a new tab.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7991
Summary: Cookie-prefix should fix phabricator instances where x.com and x.y.com have conflicting cookie names
Test Plan: Pushed branch to dev.phab.example.com, logged into phab.example.com and into dev.phab.example.com.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7979
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary:
I'm just going to store application policy settings (like view/edit policy, and default policies for content) in config, because:
1) We'll need access to it on every page, and Config is "free" since we already pull it.
2) Building separate storage and transactions seems like overkill, we get less-nice but pretty-reasonable transactions for free with config.
3) We could easily move it later if this is a bad call.
Also fix some formatting.
Test Plan: See future revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7202
Summary:
Three changes here.
- Add `setActionList()`, and use that to set the action list.
- Add `setPropertyList()`, and use that to set the property list.
These will let us add some apropriate CSS so we can fix the border issue, and get rid of a bunch of goofy `.x + .y` selectors.
- Replace `addContent()` with `appendChild()`.
This is just a consistency thing; `AphrontView` already provides `appendChild()`, and `addContent()` did the same thing.
Test Plan:
- Viewed "All Config".
- Viewed a countdown.
- Viewed a revision (add comment, change list, table of contents, comment, local commits, open revisions affecting these files, update history).
- Viewed Diffusion (browse, change, history, repository, lint).
- Viewed Drydock (resource, lease).
- Viewed Files.
- Viewed Herald.
- Viewed Legalpad.
- Viewed macro (edit, edit audio, view).
- Viewed Maniphest.
- Viewed Applications.
- Viewed Paste.
- Viewed People.
- Viewed Phulux.
- Viewed Pholio.
- Viewed Phame (blog, post).
- Viewed Phortune (account, product).
- Viewed Ponder (questions, answers, comments).
- Viewed Releeph.
- Viewed Projects.
- Viewed Slowvote.
NOTE: Images in Files aren't on a black background anymore -- I assume that's on purpose?
NOTE: Some jankiness in Phortune, I'll clean that up when I get back to it. Not related to this diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7174
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary: Ref T603. We have a real policy app now, so put the config options there. Revise the description of the public policy switch to make it clear that enabling it immediately opens up the user directory and various other interfaces.
Test Plan: Viewed/edited config setting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7154
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Fixes T3840. Depends on D7021. See task for discussion. Also improved some config/help stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3840
Differential Revision: https://secure.phabricator.com/D7022
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Ref T418. Maniphest has an obsolete class-based field selector. Replace it with CustomField-based selectors, which use the nice config UI and are generally way easier to use.
Test Plan: Added custom fields; edited and viewed custom fields on tasks. Everything worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6998
Summary: This allows administrative overreach. Administrators can enable `javascript:` and then XSS things if this isn't locked.
Test Plan: Viewed value on web UI, verified it was locked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6975
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Ref T603. Ref D6941.
Test Plan: Clicked around all over - looked good. I plan to re-test D6941 to make sure the executeOne case works now as intended
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6944
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary: Ref T3780. Facebook has some environmental / itermittent stuff which would be easier to debug with host information on the setup issue screen.
Test Plan:
Checked both in-chrome and out-of-chrome versions of this screen, both looked reasonable.
{F56694}
Reviewers: wez, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T3780
Differential Revision: https://secure.phabricator.com/D6842
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
We can get this out of PHIDType reasonably in all cases and simplify implementation here.
None of these translate correctly anyway so they're basically debugging/development strings.
Test Plan: `grep`, browsed some transactions
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6786
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary: See IRC. This is dumb but I think we should try to work by default on Debian, and it doesn't cost us too much. See inline comment for more.
Test Plan:
- No `disable_functions`, restarted, worked fine.
- Set `disable_functions = pcntl_derp`, restarted, worked fine.
- Set `disable_functions = derp`, restarted, setup fatal.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6741
Summary:
Fixes T3709. PHP has two configuration options ('disable_functions', 'disable_classes') which allow functions and classes to be blacklisted at runtime.
Since these break things in an unclear way, raise a setup fatal if they are set.
We take a slightly more tailored approach to these in `phd` already, but I'd rather try just saying "no, this is bad" and see if we can get away with it. I suspect we can, and there's no legitimate reason to blacklist functions given that Phabricator must have access to, e.g., `proc_open()`.
Test Plan: {F54058}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3709
Differential Revision: https://secure.phabricator.com/D6739
Summary: Fixes T3710. The text on these options is switched around.
Test Plan: {F54051} {F54052}
Reviewers: btrahan, nmalcolm, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3710
Differential Revision: https://secure.phabricator.com/D6737
Summary: Fixes T1144. Though actually I think T1144 wanted some handy way to email from the command-line / arc, this is cooler. :D
Test Plan: set conf properly and then ./bin/mail receive-test --as btrahan --to pasties@phabricator.dev | README --> it worked...! couldn't test files as easily but verified exception thrown when I tried to test.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1144
Differential Revision: https://secure.phabricator.com/D6622
Summary:
Ref T3373. The submit listener doesn't properly scope the form it listens to right now, so several forms on the page mean that comments post to one of them more or less at random.
Scope it properly by telling it which object PHID it is associated with.
Test Plan: Made Question comments, saw comments Ajax in on the question itself rather than on an arbitrary answer.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3373
Differential Revision: https://secure.phabricator.com/D6611
Summary:
Fixes T3632. Cleans up a bunch of DarkConsole stuff:
- The config setting had out-of-date instructions. Modernize the instructions.
- The setting was sort of hidden under "Display Preferences". Move it to a new "Developer Preferences".
- The setting magically appeared if DarkConsole was enabled on the install. Instead, always show it but explain why it isn't availalbe.
- When the user enables the console, also force it to actually be shown.
- Call out instructions about use of the "`" key more clearly.
Test Plan: Viewed config setting. Viewed settings panel. Changed setting. Enabling the setting showed DarkConsole.
Reviewers: garoevans, chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3632
Differential Revision: https://secure.phabricator.com/D6594
Summary: The `phabricator.allowed-uris` config setting is not checked properly when trying to set cookies.
Test Plan:
Set an alternate URI, then accessed Phabricator. No longer received a secondary cookie error.
Hit the new exceptions to test them:
{F51131}
{F51132}
Reviewers: btrahan, garoevans
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6528
Summary:
See discussion in T2715. Currently, PHIDs are all hard coded in the PHID application. In the long run, we need to move them out into actual applications.
A specific immediate issue is Releeph, which uses a very very old and very broken mechanism to inject PHIDs in a way that only sort of works.
Moving forward, every PHID type will be provided by a `PhabricatorPHIDType` subclass, which will manage loading it, etc.
This also moves toward cleaning up the "load objects by name" (where "name" means something like `D12`) code, which is an //enormous// mess and spread across at least 4-5 callsites.
Test Plan: Used `phid.lookup` and `phid.query` to load Slowvotes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6502
Summary: Fixes T3453. Makes it easier for me to get version info when supporting users, since they can copy/paste from the web UI instead of running a bunch of `git` commands.
Test Plan: {F50749}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3453
Differential Revision: https://secure.phabricator.com/D6491
Summary:
Ref T2852. It's a little tricky to figure out Asana workspace IDs right now. If the viewer has a linked account, just pull their workspaces and show them which IDs are available.
(In theory, we could use a `<select>`, but it would have more edge cases; this seems like a pretty solid fix.)
Test Plan: {F49938}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6437
Summary: Fixes T3525. This feels way better, although it's still a little hard for me to pick out of lists with otherwise default-colored items.
Test Plan: {F49910} {F49911}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3525
Differential Revision: https://secure.phabricator.com/D6435
Summary:
- The dialog has no body text.
- It uses an "Ignore" link because it predates action items.
Test Plan:
{F49894}
{F49895}
{F49896}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6433
Summary:
These versions are broken, but package distros seem to be picking them up. :/
Since the error you get is completely useless, fatal immediately with a useful message.
Ref T2594.
Test Plan: Faked verisions and hit the issue.
Reviewers: btrahan
Reviewed By: btrahan
CC: brennantaylor, Arijit, aran
Maniphest Tasks: T2594
Differential Revision: https://secure.phabricator.com/D6415
Summary: Fixes T3501. `apc.stat` should generally be 0 in production and 1 in development. Raise a setup warning if it isn't.
Test Plan:
Hit both setup warnings.
{F49176}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3501
Differential Revision: https://secure.phabricator.com/D6376
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary: Fixes T3400. Users are crafty. Attempt to outwit them.
Test Plan: Added all kinds of nonsense to my PATH to hit all the errors. Verified sensible-looking error messages which I couldn't figure out any way to misread or outwit.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3400
Differential Revision: https://secure.phabricator.com/D6318
