Summary: Fixes T5871. These queries get to use the actual column on the commit table since they are about the "aggregate" state of different audits.
Test Plan: issues queries and got sensible results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5871
Differential Revision: https://secure.phabricator.com/D10271
Summary: Ref T5862. makes the exception work better
Test Plan: issued some queries from audit ui with and without repos - they worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10268
Summary: Fixes T5862. The Diffusion table uses `id` but all the other infrastructure uses `phid` so just do a quick load of the repositories to get the ids. Long term, we should re-key the table by phid I think.
Test Plan: made a query with a repository and got a proper result set
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10245
Summary:
Fixes T5839. If a repository has been force pushed and garbage collected, we might have a ref cursor in the database which still points at the old commit (which no longer exists).
We'll then run a command like `git log <new hash> --not <old hash>` to figure out which commits are newly pushed, and this will bomb out because `<old hash>` is invalid.
Instead, validate all the `<old hash>` values before we try to make use of them.
Test Plan:
- Forced a repository into a bad state by mucking with the datbase, generating a reproducible failure similar to the one in T5839.
- Applied patch.
- `bin/repository update <callsign> --trace` filtered the bad commit and put the repository into the right state.
- Saw new commits recognized correctly.
- Ran `bin/repository update <callsign>` for a Mercurial and SVN repo as a sanity check.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5839
Differential Revision: https://secure.phabricator.com/D10226
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary:
Ref T4715. Some minor stuff I caught locally while poking around:
- Since we don't `GROUP BY`, we can still get duplicate commits. These get silently de-duplicated by `loadAllFromArray()` because that returns an array keyed by `id`, but we fetch too much data and this can cause us to execute too many queries to fill pages. Instead, `GROUP BY` if we joined the audit table.
- After adding `GROUP BY`, getting the audit IDs out of the query is no longer reliable. Instead, query audits by the commit PHIDs. This is approximately equiavlent.
- Since we always `JOIN`, we currently never return commits that don't have any audits. If we don't know that all results will have an audit, just `LEFT JOIN`.
- Add some `!== null` to catch the `withIDs(array())` issue that we hit with Khan Academy a little while ago.
Test Plan:
- Verified that "All Commits" shows commits with no audits of any kind.
- Verified that the raw data comes out of the query without duplicates.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5433, T4715
Differential Revision: https://secure.phabricator.com/D8879
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary:
Fixes T5304. Mercurial features a "{branches}" template keyword, documented as:
```
branches List of strings. The name of the branch on which the
changeset was committed. Will be empty if the branch name
was default.
```
At some time long in the past, I misinterpreted this to mean "list of branches where the branch head is a descendant of the commit". It is more like "list of zero or one elements, possibly containing the name of the branch the commit was originally made to, if that branch was not 'default'".
In fact, it seems like this is because a //very// long time in the past, Mercurial worked roughly like I expected:
> Ages ago (2005), we had a very different and ultimately unworkable
> approach to named branches that worked vaguely like .hgtags and allowed
> multiple branch names per revision.
http://marc.info/?l=mercurial-devel&m=129883069414855
This appears to be deprecated in modern Mercurial (it's not in the modern web documentation) although I can't find a commit about it so maybe that's just a documentation issue.
In any case, `{branches}` seems to never be useful: `{branch}` provides the same information without the awkward "default-if-empty" case.
Switch from `{branches}` to either `{branch}` (where that's good enough, notably in the hook engine) or `(descendants(%s) and head())`, which is equivalent to `--contains` in Git.
This fixes pushing to branches with spaces in their names, and makes the "Branches" / "Contains" queries moderately more consistent.
Test Plan:
- Pushed to a Mercurial branch with a space in it.
- Viewed list of branches in a Mercurial repository.
- Viewed containing branches of a Mercurial commit in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5304
Differential Revision: https://secure.phabricator.com/D9453
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Ref T2683. This field is //almost// entirely redundant with `symbolicCommit`. Improve how some of the diff query stuff works a bit, then remove it.
Test Plan: Browsed around in all interfaces, looked at a bunch of diffs, etc.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D9099
Summary:
Ref T2683. Further reduces query count of last modified loads; we're now at 11 instead of 200+.
(This works in SVN but could be further optimized.)
Test Plan:
Loaded SVN, Mercurial, Git:
{F34864}
{F34865}
{F34866}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, vrana, aran
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D5256
Summary: Ref T2683. This query is currently unbatched and happens inside a view. Leave it inside the view for now, but separate it and make it batchable.
Test Plan: {F34848}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, vrana, aran
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D5252
Summary:
Fixes T4911. See D8879. This gives us the correct query in cases where there are no audits.
This doesn't try to do the GROUP BY stuff yet.
Test Plan:
- Viewed a commit in Diffusion with no audits, got a commit detail page.
- Viewed "All Commits" in web UI, saw commits without any audits included in the list.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4911
Differential Revision: https://secure.phabricator.com/D8882
Summary: ...also kills off "PhabricatorAuditCommitQuery" and "PhabricatorAuditQuery", by moving the work to "DiffusionCommitQuery". Generally cleans up some code around the joint on this too. Also provides policies for audit requests, which is basically the policy for the underlying commit. Fixes T4715. (For the TODO I added about files, I just grabbed T4713.)
Test Plan:
Audit: verified the three default views all showed the correct things, including highligthing. did some custom queries and got the correct results.
Diffusion: verified "blame view" still worked. verified paths were highlighted for packages i owned.
Home: verified audit boxes showed up with proper commits w/ audits
bin/audit: played around with it via --dry-run and got the right audits back
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8805
Summary: We have a dozen users who has `(...)` in their 'real name', like 'Jimmy (He) Zhang', and it's causing the diffusion file browser problems when blame is enabled. The parser does not expect those parenthesis and the lines of code will be empty if they were last touched by a user like that.
Test Plan: Try it
Reviewers: wez, lifeihuang, JoelB, #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8429
Summary:
Fixes T4344. `diffusion.getcommits` is nasty old bad news. Implement a modern query method.
This method provides limit/paging in a somewhat abstract way so it's sort of ultramodern, but I didn't want the default behavior to return a million rows. I'll probably move more stuff toward this over time, now that cursor paging is pervasive. Here, we needed extra metadata (the identifier map) anyway.
Test Plan: Used console to execute command.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4344
Differential Revision: https://secure.phabricator.com/D8077
Summary: Ref T4327. At some point these two very similar classes got introduced. Collapse `DiffusionBranchInformation` into the nearly identical `DiffusionRepositoryRef`, which enjoys slightly more generality and support.
Test Plan: Viewed branch overview and detail pages. Ran `repository refs` and `repository discover`. Grepped for removed symbols.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4327
Differential Revision: https://secure.phabricator.com/D8002
Summary:
Ref T4276. When a change is larger than 2GB, PHP can not read the entire change into a string, so Herald can not process it.
Additionally, we already have a time limit for practical reasons, but it's huge (probably incorrectly). To deal with these things:
- Add an optional byte limit to `diffusion.rawdiffquery`.
- Make the query with a 1GB limit.
- Reduce the diff timeout from 15 hours to 15 minutes.
- Add a "Changeset is enormous" field. This field is true for changes which are too large to process.
This generally makes behaviors more sane:
- We'll always make progress in Herald in a reasonable amount of time.
- Installs can write global rules to handle (or reject) these types of changes.
Test Plan: Set limit to 25 bytes instead of 1GB and ran test console on various changes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4276
Differential Revision: https://secure.phabricator.com/D7885
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary: Ref T4195. I need to query commit metadata to figure out which revision a commit is associated with. Move this out of the MessageParser so the code can be called from the HookEngine.
Test Plan: Used `reparse.php` to reparse a variety of SVN, Mercurial and Git commits. Used `var_dump()` to verify sensible fields were returned.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7805
Summary: Ref T4195. I need this for the Herald pre-commit rules, and it generally simplifies things.
Test Plan: Used `reparse.php` plus `var_dump()` to inspect refs in Git, Mercurial and SVN repos. They all looked correct and reparsed correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7804
Summary:
Ref T4195. To implement the "Author" and "Committer" rules, I need to resolve author/committer strings into Phabricator users.
The code to do this is currently buried in the daemons. Extract it into a standalone query.
I also added `bin/repository lookup-users <commit>` to test this query, both to improve confidence I'm getting this right and to provide a diagnostic command for users, since there's occasionally some confusion over how author/committer strings resolve into valid users.
Test Plan:
I tested this using `bin/repository lookup-users` and `reparse.php --message` on Git, Mercurial and SVN commits. Here's the `lookup-users` output:
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIS3
Examining commit rINIS3...
Raw author string: epriestley
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rPOEMS165b6c54f487c8
Examining commit rPOEMS165b6c54f487...
Raw author string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIH6d24c1aee7741e
Examining commit rINIH6d24c1aee774...
Raw author string: epriestley <hg@yghe.net>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $
The `reparse.php` output was similar, and all VCSes resolved authors correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1731, T4195
Differential Revision: https://secure.phabricator.com/D7801
Summary: Ref T4195. Even though we use `svnlook` in the hook itself, I need this query elsewhere, so provide it and merge the classes into one which does the right thing.
Test Plan:
- Used `reparse.php` to reparse messages for Git, SVN and Mercurial commits, using `var_dump()` to examine the commit refs for sanity.
- Used `reparse.php` to reparse changes for an SVN commit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7800
Summary: There were a number of places that were generating nonsense queries for both hosted and non-hosted subversion repositories.
Test Plan: Attempted several activities in Diffusion with both a hosted and non-hosted subversion repository, including viewing various types of diffs and raw files.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7799
Summary: Ref T4195. Same as D7793, but for mercurial. (As usual, SVN needs some goofy nonsense instead, so the next diff will just make this field work.)
Test Plan: Ran `reparse.php` on Git and Mercurial commits, var_dump'd the output and it looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7795
Summary: Ref T4195. I need to issue this command from the pre-commit hook to get commit bodies for hooks.
Test Plan: Ran `reparse.php --message --trace` and dumped the $ref, which looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7793
Summary:
Ref T615. Ref T4237. With `--debug`, Mercurial will echo an "ignoring untrusted configuration option" warning **to stdout** if `.hgrc` has the wrong owner.
However, we need `--debug` to make `{parents}` usable, at least until the patches I got into the upstream are widely deployed. So after getting `--debug` output, strip off any leading warnings.
These warnings should always be in English, at least, since we set `LANG` explicitly.
Test Plan: Unit tests. @asherkin, maybe you can confirm this? I can't actually get the warning, but I think my `hg` in PATH is just a bit out of date.
Reviewers: asherkin, btrahan
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T615, T4237
Differential Revision: https://secure.phabricator.com/D7784
Summary: Most checks were actually in place, but `ExecFuture` throws a `CommandException` which wasn't taken into account.
Test Plan: look at the first command and no longer saw an exception. Also, other commits worked as well.
Reviewers: richardvanvelzen
Reviewed By: richardvanvelzen
CC: krisbuist, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7730
Summary:
Fixes T4067. The way `DiffusionCommitQuery` works prevents it from loading SVN identifiers in some cases without additional constraints, since "12345" might be an SVN revision 12345, or it might be the first 5 characters of a Git commit hash.
Introduce `withRepository()` as a shorthand for `withDefaultRepository()` + `withRepositoryIDs()`. This tells the query to:
- Only look in the given repository; and
- use the more liberal identifier resolution rules while doing so.
The practical impact this has is that blame tooltips in SVN work again. The other queries which are fixed here were never run in SVN (which doesn't have first-class branches or tags); I've cleaned them up only for completeness.
Test Plan:
- Viewed blame in SVN, saw information again instead of empty tooltip.
- Viewed brnaches/tags in Mercurial and Git.
{F79226}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4067
Differential Revision: https://secure.phabricator.com/D7523
Summary:
Ref T1493. Diffusion has some garbagey behavior for things we can't resolve. Common cases are:
- Looking at a branch that doesn't exist.
- Looking at a repository with no branches.
- Looking at a commit that doesn't exist.
- Looking at an empty repository.
In these cases, we generally fatal unhelpfully. I want to untangle this mess.
This doesn't help much, but does clean things up a bit. We currently have two separate query paths, "stablecommitname" and "expandshortcommit". These are pretty much doing the same thing -- taking some ref like "master" or "default" or a tag name or part of a commit name, and turning it into a full commit name. Merge them into a single "resolverefs" method.
This simplifies the code a fair bit, and gives us better error messages. They still aren't great, but they're like this now:
Ref "7498aec194ecf2d333e0e2baddd9d5cdf922d7f1" is ambiguous or does not exist.
...instead of just:
ERR-INVALID-COMMIT
Test Plan: Looked at Git, Mercurial and Subversion repositories that were empty and non-empty. Looked at branches/heads. Tried to look at invalid commits. Looked at tags. All of this still works, and some behaviors are a bit better than they used to be.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7484
Summary: Ref T1493. Consolidate these a bit; they might need some more magic once we do `--noupdate` checkouts. Mostly just trying to clean up and centralize this code a bit.
Test Plan: Viewed and `bin/repository discover`'d Mercurial repos with and without any branches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7480
Summary: The new "importStatus" property provides a much stronger and more consistent version of this flag. The only callsite was removed by D7452.
Test Plan: Used `grep` to check for callsites and found none.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7453
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary: Fixes T4035. I removed these two "remote/" things in rP59922b7, but we need them for non-bare repositories. Without them, the commands work and run fine and the output looks OK, but the results may not reflect the correct information (e.g., the log shows the working copy's master, which may not be in the same state as origin/master). I'm going to generally clean this up, but unbreak it for now.
Test Plan: Viewed bare and non-bare repositories in Diffusion, got accurate history.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T4035
Differential Revision: https://secure.phabricator.com/D7445
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Ref T603. This swaps almost all queries against the repository table over to be policy aware.
Test Plan:
- Made an audit comment on a commit.
- Ran `save_lint.php`.
- Looked up a commit with `diffusion.getcommits`.
- Looked up lint messages with `diffusion.getlintmessages`.
- Clicked an external/submodule in Diffusion.
- Viewed main lint and repository lint in Diffusion.
- Completed and validated Owners paths in Owners.
- Executed dry runs via Herald.
- Queried for package owners with `owners.query`.
- Viewed Owners package.
- Edited Owners package.
- Viewed Owners package list.
- Executed `repository.query`.
- Viewed "Repository" tool repository list.
- Edited Arcanist project.
- Hit "Delete" on repository (this just tells you to use the CLI).
- Created a repository.
- Edited a repository.
- Ran `bin/repository list`.
- Ran `bin/search index rGTESTff45d13dffcfb3ea85b03aac8cc36251cacdf01c`
- Pushed and parsed a commit.
- Skipped all the Drydock stuff, as it it's hard to test and isn't normally reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7132
Summary: Fixes T3697. Currently, we don't pass "branch" implicitly, so, e.g., when viewing a branch you don't get the right commit hash when looking up the README.
Test Plan: Viewed a non-`master` branch with a README, no fatal. Poked around and couldn't find anything suspicious.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3697
Differential Revision: https://secure.phabricator.com/D6734
Summary: Ref T2716. Ref T2715. Move CMIT to use Application PHIDs. Nothing too special here, but I consolidated some code into DiffusionCommitQuery. Depends on D6514.
Test Plan: Browsed Diffusion. Browsed Differential/Maniphest with linked commits. Used jump nav; used `phid.lookup` and `phid.query`. Used remarkup for Git and SVN repos. Grepped for PHID_TYPE_CMIT.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715, T2716
Differential Revision: https://secure.phabricator.com/D6515
Summary: Ref T3377. MySQL ignores indexes if we hand it mismatched datatypes. This seems colossally dumb, but give it what it expects.
Test Plan: wat
Reviewers: wez, btrahan
Reviewed By: wez
CC: aran
Maniphest Tasks: T3377
Differential Revision: https://secure.phabricator.com/D6201
Summary:
Ref T2784. Relatively complicated one as this bad boy is used in a repository daemon.
While testing, I noticed bugs in the expandshortname query stuff. Those variables are private to the parent class so they need some setX love.
Also, was unable to find links to the "before" stuff, but made them by hand by looking at some of these T2784 diffs, browsing a file at a specific revision, then hacking the "before" variable to be some known commit that also touched the file. This produced sensical results. On the process of doing that I upgraded a query to use the proper policy query.
Test Plan: In git, mercurial, svn, verified on a commit page the "parents" showed up correctly. played around with ?before parameter on specific file browse page, with commits known to have interesting history and stuff looked good
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5988
Summary: Ref T2784. Also sneaks in a fix for branch query -- forgot to catch the unsupported VCS exception. One strange thing is I have test Phabricator repositories and the mercurial one is showing different data than git for the same commit. The data shown is consistent pre and post this diff though so its an existing issue. Also note the mercurial is an import of git so maybe its busted-ish?
Test Plan: viewed commits in mercurial, svn, and git that were merge commits. saw the right stuff in mercurial and git.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5985
Summary: Ref T2784
Test Plan: for each flavor of VCS, I loaded up the repository home page. verified I saw some parent action where appropos. next, clicked through to 'view history' and verified it loaded up A-OK.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5960
Summary: Ref T2784. This is a lower-level one from drequest so it gets the conditional initialization treatment. Consolidated SVN as well even though SVN is issuing database queries; I felt better about the code de-duplication despite the small performance hit when we could just query the DB directly in the SVN case.
Test Plan: browsed around my Phabricator repositories in Mercurial, Git, and SVN flavors. Looked good.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5956
Summary: Currently this is fairly hard-coded. Instead, make it use available receivers. Ref T1205.
Test Plan: Used mail form to send mail to various objects (Dnn, Tnn, Cnn, etc.). Only some of these work right now because the receiver thing still hard-codes a bunch of junk.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5944
Summary: Ref T2784. This one was a wee bit complicated. Had to add PhabricatorUser and concept of initFromConduit (or not) to DiffusionRequest.
Test Plan: foreach repo, visited CALLSIGN and clicked a commit and verified they laoded correctly. Hacked code to hit NOT via Conduit and repeated tests to great success.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5928
