Summary: Depends on D19921. Ref T11351. Ref T13065. Update Pholio to use the shared mail infrastructure. See D19670 for a previous change in this vein.
Test Plan: Ran upgrade, spot-checked that everything made it into the new table alive.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065, T11351
Differential Revision: https://secure.phabricator.com/D19922
Summary:
Ref T11351. In Pholio, we currently use a `mockID`, but a `mockPHID` is generally preferable / more modern / more flexible. In particular, we need PHIDs to load handles and prefer PHIDs when exposing information to the API, and using PHIDs internally makes a bunch of things easier/better/faster and ~nothing harder/worse/slower.
I'll add some inlines about a few things.
Test Plan: Ran migrations, spot-checked database for sanity. Loaded Pholio, saw data unchanged. Created and edited images.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19914
Summary:
Depends on D19893. Ref T13222. See PHI873. A challenge is "answered" if you provide a valid response. A challenge is "completed" if we let you through the MFA check and do whatever actual action the check is protecting.
If you only have one MFA factor, challenges will be "completed" immediately after they are "answered". However, if you have two or more factors, it's possible to "answer" one or more prompts, but fewer than all of the prompts, and end up with "answered" challenges that are not "completed".
In the future, it may also be possible to answer all the challenges but then have an error occur before they are marked "completed" (for example, a unique key collision in the transaction code). For now, nothing interesting happens between "answered" and "completed". This would take the form of the caller explicitly providing flags like "wait to mark the challenges as completed until I do something" and "okay, mark the challenges as completed now".
This change prevents all token reuse, even on the same workflow. Future changes will let the answered challenges "stick" to the client form so you don't have to re-answer challenges for a short period of time if you hit a unique key collision.
Test Plan:
- Used a token to get through an MFA gate.
- Tried to go through another gate, was told to wait for a long time for the next challenge window.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19894
Summary:
Depends on D19912. Ref T11351. Images currently use `getMock()->getPolicy()` stuff to define policies. This causes bugs with object policies like "Subscribers", since the policy engine tries to evaluate the subscribers //for the image// when the intent is to evaluate the subscribers for the mock.
Move this to ExtendedPolicies to fix the behavior, and give Images sensible policy behavior when they aren't attached to a mock (specifically: only the user who created the image can see it).
Test Plan: Applied migrations, created and edited mocks and images without anything blowing up. Set mock visibility to "Subscribers", everything worked great.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11351
Differential Revision: https://secure.phabricator.com/D19913
Summary:
Depends on D19888. Ref T13222. When we issue an MFA challenge, prevent the user from responding to it in the context of a different workflow: if you ask for MFA to do something minor (award a token) you can't use the same challenge to do something more serious (launch nukes).
This defuses highly-hypothetical attacks where the attacker:
- already controls the user's session (since the challenge is already bound to the session); and
- can observe MFA codes.
One version of this attack is the "spill coffee on the victim when the code is shown on their phone, then grab their phone" attack. This whole vector really strains the bounds of plausibility, but it's easy to lock challenges to a workflow and it's possible that there's some more clever version of the "spill coffee" attack available to more sophisticated social engineers or with future MFA factors which we don't yet support.
The "spill coffee" attack, in detail, is:
- Go over to the victim's desk.
- Ask them to do something safe and nonsuspicious that requires MFA (sign `L123 Best Friendship Agreement`).
- When they unlock their phone, spill coffee all over them.
- Urge them to go to the bathroom to clean up immediately, leaving their phone and computer in your custody.
- Type the MFA code shown on the phone into a dangerous MFA prompt (sign `L345 Eternal Declaration of War`).
- When they return, they may not suspect anything (it would be normal for the MFA token to have expired), or you can spill more coffee on their computer now to destroy it, and blame it on the earlier spill.
Test Plan:
- Triggered signatures for two different documents.
- Got prompted in one, got a "wait" in the other.
- Backed out of the good prompt, returned, still prompted.
- Answered the good prompt.
- Waited for the bad prompt to expire.
- Went through the bad prompt again, got an actual prompt this time.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19889
Summary:
Ref T13222. See PHI873. Ref T9770.
Currently, we support only TOTP MFA. For some MFA (SMS and "push-to-app"-style MFA) we may need to keep track of MFA details (e.g., the code we SMS'd you). There isn't much support for that yet.
We also currently allow free reuse of TOTP responses across sessions and workflows. This hypothetically enables some "spyglass" attacks where you look at someone's phone and type the code in before they do. T9770 discusses this in more detail, but is focused on an attack window starting when the user submits the form. I claim the attack window opens when the TOTP code is shown on their phone, and the window between the code being shown and being submitted is //much// more interesting than the window after it is submitted.
To address both of these cases, start tracking MFA "Challenges". These are basically a record that we asked you to give us MFA credentials.
For TOTP, the challenge binds a particular timestep to a given session, so an attacker can't look at your phone and type the code into their browser before (or after) you do -- they have a different session. For now, this means that codes are reusable in the same session, but that will be refined in the future.
For SMS / push, the "Challenge" would store the code we sent you so we could validate it.
This is mostly a step on the way toward one-shot MFA, ad-hoc MFA in comment action stacks, and figuring out what's going on with Duo.
Test Plan:
- Passed MFA normally.
- Passed MFA normally, simultaneously, as two different users.
- With two different sessions for the same user:
- Opened MFA in A, opened MFA in B. B got a "wait".
- Submitted MFA in A.
- Clicked "Wait" a bunch in B.
- Submitted MFA in B when prompted.
- Passed MFA normally, then passed MFA normally again with the same code in the same session. (This change does not prevent code reuse.)
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222, T9770
Differential Revision: https://secure.phabricator.com/D19886
Summary:
Ref T13222. Ref T13225. We store a digest of the session key in the session table (not the session key itself) so that users with access to this table can't easily steal sessions by just setting their cookies to values from the table.
Users with access to the database can //probably// do plenty of other bad stuff (e.g., T13134 mentions digesting Conduit tokens) but there's very little cost to storing digests instead of live tokens.
We currently digest session keys with HMAC-SHA1. This is fine, but HMAC-SHA256 is better. Upgrade:
- Always write new digests.
- We still match sessions with either digest.
- When we read a session with an old digest, upgrade it to a new digest.
In a few months we can throw away the old code. When we do, installs that skip upgrades for a long time may suffer a one-time logout, but I'll note this in the changelog.
We could avoid this by storing `hmac256(hmac1(key))` instead and re-hashing in a migration, but I think the cost of a one-time logout for some tiny subset of users is very low, and worth keeping things simpler in the long run.
Test Plan:
- Hit a page with an old session, got a session upgrade.
- Reviewed sessions in Settings.
- Reviewed user logs.
- Logged out.
- Logged in.
- Terminated other sessions individually.
- Terminated all other sessions.
- Spot checked session table for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13225, T13222
Differential Revision: https://secure.phabricator.com/D19883
Summary:
Ref T13222. See PHI873. I'm preparing to introduce a new MFA "Challenge" table which stores state about challenges we've issued (to bind challenges to sessions and prevent most challenge reuse).
This table will reference sessions (since each challenge will be bound to a particular session) but sessions currently don't have PHIDs. Give them PHIDs and slightly modernize some related code.
Test Plan:
- Ran migrations.
- Verified table got PHIDs.
- Used `var_dump()` to dump an organic user session.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19881
Summary: Ref T13218. This is like `loadOneWhere(...)` but with more dark magic. Get rid of it.
Test Plan:
- Forced `20130219.commitsummarymig.php` to hit this code and ran it with `bin/storage upgrade --force --apply ...`.
- Ran `20130409.commitdrev.php` with `bin/storage upgrade --force --apply ...`.
- Called `user.search` to indirectly get primary email information.
- Did not test Releeph at all.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13218
Differential Revision: https://secure.phabricator.com/D19876
Summary:
Ref T13216. See PHI959. These two recent migrations can be expressed more efficiently:
- When updating commit audit statuses, the field isn't JSON encoded or anything so we can just issue several bulk UPDATEs.
- When inserting mail keys, we can batch them in groups of 100.
Test Plan: Used `bin/storage upgrade -f --apply phabricator:...` to reapply patches. Saw equivalent behavior and faster runtimes.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19802
Summary:
Ref T13217. This method is slightly tricky:
- We can't safely return a string: return an array instead.
- It no longer makes sense to accept glue. All callers use `', '` as glue anyway, so hard-code that.
Then convert all callsites.
Test Plan: Browsed around, saw fewer "unsafe" errors in error log.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13217
Differential Revision: https://secure.phabricator.com/D19784
Summary:
Depends on D19779. Ref T13216. The push logs currently record the "hostWait", which is roughly "locking + subprocess cost". We also record locking separately, so we can figure out "subprocess cost" alone by subtracting the lock costs.
However, the subprocess (normally `git receive-pack`) runs hooks, and we don't have an easy way to figure out how much time was spent doing actual `git` stuff vs spent doing commit hook processing. This would have been useful in diagnosing at least one recent issue.
Track at least a rough hook cost and record it in the push logs.
Test Plan: Pushed to a repository, saw a reasonable hook cost appear in the database table.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19780
Summary:
Depends on D19778. Ref T13216. See PHI943, PHI889, et al.
We currently have a push log and a pull log, but do not separately log intracluster synchronization events. We've encountered several specific cases where having this kind of log would be helpful:
- In PHI943, an install was accidentally aborting locks early. Having timing information in the sync log would let us identify this more quickly.
- In PHI889, an install hit an issue with `MaxStartups` configuration in `sshd`. A log would let us identify when this is an issue.
- In PHI889, I floated a "push the linux kernel + fetch timeout" theory. A sync log would let us see sync/fetch timeouts to confirm this being a problem in practice.
- A sync log will help us assess, develop, test, and monitor intracluster routing sync changes (likely those in T13211) in the future.
Some of these events are present in the pull log already, but only if they make it as far as running a `git upload-pack` subprocess (not the case with `MaxStartups` problems) -- and they can't record end-to-end timing.
No UI yet, I'll add that in a future change.
Test Plan:
- Forced all operations to synchronize by adding `|| true` to the version check.
- Pulled, got a sync log in the database.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19779
Summary:
Fixes T13208. See that task for details.
The `clone $query` line is safe if `$query` is a builtin query (like "open").
However, if it's a saved query we clone not only the query parameters but the ID, too. Then when we `save()` the query later, we overwrite the original query.
So this would happen in the database. First, you run a query and save it as the workboard default (query key "abc123"):
| 123 | abc123 | {"...xxx..."} |
Then we `clone` it and change the parameters, and `save()` it. But that causes an `UPDATE ... WHERE id = 123` and the table now looks like this:
| 123 | def456 | {"...yyy..."} |
What we want is to create a new query instead, with an `INSERT ...`:
| 123 | abc123 | {"...xxx..."} |
| 124 | def456 | {"...yyy..."} |
Test Plan:
- Followed reproduction steps from above.
- With just the new `save()` guard, hit the guard error.
- With the `newCopy()`, got a new copy of the query and "View as Query" remained functional without overwriting the original query row.
- Ran migration, saw an affected board get fixed.
Reviewers: amckinley, joshuaspence
Reviewed By: joshuaspence
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13208
Differential Revision: https://secure.phabricator.com/D19768
Summary:
Depends on D19751. Ref T13210. When Drydock needs to reclaim an existing unused resource in order to build a new resource to satisfy a lease, the lease which triggered the reclaim currently gets thrown back into the pool with a 15-second yield.
If the queue is pretty empty and the reclaim is quick, this can mean that we spend up to 15 extra seconds just waiting for the lease update task to get another shot at building a resource (the resource reclaim may complete in a second or two, but nothing else happens until the yield ends).
Instead, when a lease triggers a reclaim, have the reclaim reawaken the lease task when it completes. In the best case, this saves us 15 seconds of waiting. In other cases (the task already completed some other way, the resource gets claimed before the lease gets to it), it's harmless.
Test Plan:
- Allocated A, A, A working copies with limit 3. Leased a B working copy.
- Before patch: allocation took ~32 seconds.
- After patch: allocation takes ~17 seconds (i.e., about 15 seconds less).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13210
Differential Revision: https://secure.phabricator.com/D19752
Summary: Ref T13197. See PHI873. I want to give RepositoryOperation objects access to Drydock logging like leases, resources, and blueprints currently have. This just does the schema/query changes, no actual UI or new logging yet.
Test Plan: Ran storage upgrade, poked around the UI looking for anything broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19671
Summary: Depends on D19652. Ref T13197. See PHI851. This migrates the actual `auditStatus` on Commits, and older status transactions.
Test Plan:
- Ran migrations.
- Spot-checked the database for sanity.
- Ran some different queries, got unchanged results from before migration.
- Reviewed historic audit state transactions, and accepted/raised concern on new audits. All state transactions appeared to generate properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19655
Summary: Depends on D19651. Ref T13197. The application now accepts either numeric or string values. However, for consistency and to reduce surprise in the future, migrate existing saved queries to use string values.
Test Plan: Saved some queries on `master` with numeric constants, ran the migration, saw string constants in the database and equivalent behavior in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19652
The unique key on <documentPHID, version> may fail to apply if any content
rows don't have a valid document. This is rare, but we have some old random
garbage rows on "secure.phabricator.com" which prevent the next patch from
applying. Just toss these rows, they're junk.
Summary:
Ref T13077. We need to know the maximum version of a document in several cases, so denormalize it onto the Document object.
Then clean up some behaviors where we edit a document with, e.g., 7 versions but version 5 is currently published. For now, we: edit starting with version 7, save as version 8, and immediately publish the new version.
Test Plan:
- Ran migration.
- Edited a draft page without hitting any weird version errors.
- Checked database for sensible `maxVersion` values.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19625
Summary:
See T13193. See T13077. If we drop a column which is part of a UNIQUE KEY, MariaDB raises an error.
This is probably a bad idea on our side anyway, but in this case it wasn't an obviously bad idea.
To get around this:
- Drop the unique key, if it exists, before dropping the column.
- Explicitly add the new unique key afterward.
Test Plan: Ran `bin/storage upgrade` locally without issue, but I'm on MySQL. Will follow up on T13193.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19624
Summary: Depends on D19619. Ref T13065. Ref T13077. Migrate Phriction mail keys to the new infrastructure and drop the column.
Test Plan: Ran migrations, spot-checked the database.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077, T13065
Differential Revision: https://secure.phabricator.com/D19620
Summary:
Ref T13077. This is mostly just a small cleanup change, even though the actual change is large.
We currently reference content and document objects from one another with `contentID` and `documentID`, but this means that `contentID` must be nullable. Switching to PHIDs allows the column to be non-nullable.
This also supports reorienting some current and future transactions around PHIDs, which is preferable for the API. In particular, I'm adding a "publish version X" transaction soon, and would rather callers pass a PHID than an ID or version number, since this will make the API more consistent and powerful.
Today, `contentID` gets used as a cheaty way to order documents by (content) edit time. Since PHIDs aren't orderable and stuff is going to become actually-revertible soon, replace this with an epoch timestamp.
Test Plan:
- Created, edited, moved, retitled, and deleted Phriction documents.
- Grepped for `documentID` and `contentID`.
- This probably breaks //something// but I'll be in this code for a bit and am likely to catch whatever breaks.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19619
Summary: Ref T13189. See PHI690. When a lease is first acquired or activated, note the time. This supports better visibility into queue lengths. For now, this is only queryable via DB and visible in the UI, but can be more broadly exposed in the future.
Test Plan: Landed a revision, saw the leases get sensible timestamps for acquisition/activation.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19613
Summary: Ref T12164. Defines a new manual activity that suggests rebuilding repository identities before Phabricator begins to rely on them.
Test Plan:
- Ran migration, observed expected setup issue: {F5788217}
- Ran `bin/config done identities` and observed setup issue get marked as done.
- Ran `/bin/storage upgrade --apply phabricator:20170912.ferret.01.activity.php` to make sure I didn't break the reindex migration; observed reindex setup issue appear as expected.
- Ran `./bin/config done reindex` and observed reindex issue cleared as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19497
Summary:
Ref T13164. See PHI774. Fixes T12435.
Since Phriction is hierarchical, there isn't a super strong motivation to support Spaces: you can generally set policies on a small number of documents to get the desired effective policy behavior.
However, it still improves consistency and there's no reason //not// to support Spaces. In the case where you have some moderately weird/complex policy on one or more Spaces, using Spaces to define the policy behavior can make things a bit simpler and easier to understand.
This probably doesn't actually fix whatever the root problem in T12435 was (complicated, non-hierarchical access policies?). See also a bunch of discussion in T12442. So we might end up going beyond this to address other use cases, but I think this is reasonable regardless.
Test Plan: Created and edited Phriction documents and shifted them between Spaces. Searched by Space, etc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164, T12435
Differential Revision: https://secure.phabricator.com/D19553
Summary:
See PHI774. Ref T13164. There is no reason projects //don't// support Spaces, just a vague concern that it's not hugely useful and might be a bit confusing.
However, it's at least somewhat useful (to improve consistency and reduce special casing) and doesn't necessarily seem more confusing than Projects are anyway. Support is trivial from a technical point of view, so just hook it up.
Test Plan: Created new projects, shifted projects between spaces. The support is all pretty much automatic.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19549
Summary: Depends on D19429. Depends on D19423. Ref T12164. This creates new columns `authorIdentityPHID` and `committerIdentityPHID` on commit objects and starts populating them. Also adds the ability to explicitly set an Identity's assignee to "unassigned()" to null out an incorrect auto-assign. Adds more search functionality to identities. Also creates a daemon task for handling users adding new email address and attempts to associate unclaimed identities.
Test Plan: Imported some repos, watched new columns get populated. Added a new email address for a previous commit, saw daemon job run and assign the identity to the new user. Searched for identities in various and sundry ways.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19443
Summary: Depends on D19423. Ref T12164. Adds controllers capable of listing and editing `PhabricatorRepositoryIdentity` objects. Starts creating those objects when commits are parsed.
Test Plan: Reparsed some revisions, observed objects getting created in the database. Altered some `Identity` objects using the controllers and observed effects in the database. No attempts made to validate behavior under "challenging" author/committer strings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19429
Summary: Ref T12164. Start building initial objects for managing `RepositoryIdentity` objects. This won't land until much more of the infrastructure is in place.
Test Plan: Ran `bin/storage upgrade` and observed expected table.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19423
Summary:
Depends on D19427. Ref T13130. See PHI251. Support configuring owners packages so they ignore generated paths.
This is still a little rough. A couple limitations:
- It's hard to figure out how to use this control if you don't know what it's for, but we don't currently have a "CheckboxesEditField". I may add that soon.
- The attribute ignore list doesn't apply to Diffusion, only Differential, which isn't obvious. I'll either try to make it work in Diffusion or note this somewhere.
- No documentation yet (which could mitigate the other two issues a bit).
But the actual behavior seems to work fine.
Test Plan:
- Set a package to ignore paths with the "generated" attribute. Saw the package stop matching generated paths in Differential.
- Removed the attribute from the ignore list.
- Tried to set invalid attributes, got sensible errors.
- Queried a package with Conduit, got the ignored attribute list.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19428
Summary:
Depends on D19426. Ref T13130. Ref T13065. While I'm making changes to Owners for "Ignore generated paths", clean up the "mailKey" column.
We recently (D19399) added code to automatically generate and manage mail keys so we don't need a ton of `mailKey` properties in the future. Migrate existing mail keys and blow away the explicit column on packages.
Test Plan: Ran migration, manually looked at the database and saw sensible data. Edited a package to send some mail, which looked good.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130, T13065
Differential Revision: https://secure.phabricator.com/D19427
Summary:
Ref T13065. `mailKey`s are a private secret for each object. In some mail configurations, they help us ensure that inbound mail is authentic: when we send you mail, the "Reply-To" is "T123+456+abcdef".
- The `T123` is the object you're actually replying to.
- The `456` is your user ID.
- The `abcdef` is a hash of your user account with the `mailKey`.
Knowing this hash effectively proves that Phabricator has sent you mail about the object before, i.e. that you legitimately control the account you're sending from. Without this, anyone could send mail to any object "From" someone else, and have comments post under their username.
To generate this hash, we need a stable secret per object. (We can't use properties like the PHID because the secret has to be legitimately secret.)
Today, we store these in `mailKey` properties on the actual objects, and manually generate them. This results in tons and tons and tons of copies of this same ~10 lines of code.
Instead, just store them in the Mail application and generate them on demand. This change also anticipates possibly adding flags like "must encrypt" and "original subject", which are other "durable metadata about mail transmission" properties we may have use cases for eventually.
Test Plan:
- See next change for additional testing and context.
- Sent mail about Herald rules (next change); saw mail keys generate cleanly.
- Destroyed a Herald rule with a mail key, saw the mail properties get nuked.
- Grepped for `getMailKey()` and converted all callsites I could which aren't the copy/pasted boilerplate present in 50 places.
- Used `bin/mail receive-test --to T123` to test normal mail receipt of older-style objects and make sure that wasn't broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D19399
Summary: See discussion in D19379. The 4-tuple of (device, network, address, port) should be unique.
Test Plan: Created lots of duplicate interfaces, bound those interfaces to various services, observed migration script clean things up correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19388
Summary: Fixes T13129. This at least makes the existing UI work again before we banish Phlux to the shadow realm.
Test Plan: Edited the visibility for a Phlux variable, didn't get an error. Nothing showed up in the edge tables when I made those changes, but at least it doesn't error out anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13129
Differential Revision: https://secure.phabricator.com/D19387
Summary:
The name of networks should be unique.
Also adds support for exact-name queries for AlamanacNetworks.
Test Plan: Applied migration with existing duplicates, saw networks renamed, attempted to add duplicates, got a nice error message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19379
Summary:
Depends on D19322. Ref T13120. Ref T12414.
Currently, `AlmanacDevice` has a bit of a beast of a `TYPE_INTERFACE` transaction that fully creates a complex Interface object. This isn't very flexible or consistent, and Interfaces are complex enough to reasonably have their own object behaviors (for example, they have their own PHIDs).
The complexity of this transaction makes modularizing `AlmanacDevice` transactions tricky. To simplify this, move Interface toward having its own set of normal transactions.
This change just adds some reasonable-looking transactions; it doesn't actually hook them up in the UI or make them reachable. I'll test that they actually work as I swap the UI over.
We may also have some code using the `TYPE_INTERFACE` transaction in Phacility support stuff, so that may need to wait a week to actually phase out.
Test Plan: Ran `bin/storage upgrade` and `arc liberate`. This code isn't reachable yet.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19323
Summary:
Depends on D19284. Ref T13110. It's now possible to get a revision into a "Abandoned + But, Never Promoted From Draft" state. Show this in the header and provide the draft hint above the comment area.
Also, remove `shouldBroadcast()`. The method `getShouldBroadcast()` now has the same meaning.
Finally, migrate existing drafts to `shouldBroadcast = false` and default `shouldBroadcast` to `true`. If we don't do this, every older revision becomes a non-broadcasting revision because this flag was not explicitly set on revision creation before, only on promotion out of draft.
Test Plan: Ran migration; abandoned draft revisions and ended up in a draft + abandoned state.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19285
Summary:
Depends on D19249. Ref T13109. Add timing information to the `PushEvent`:
- `writeWait`: Time spent waiting for a write lock.
- `readWait`: Time spent waiting for a read lock.
- `hostWait`: Roughly, total time spent on the leaf node.
The primary goal here is to see if `readWait` is meaningful in the wild. If it is, that motivates smarter routing, and the value of smarter routing can be demonstrated by looking for a reduction in read wait times.
Test Plan: Pushed some stuff, saw reasonable timing values in the table. Saw timing information in "Export Data".
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19250
Summary:
Depends on D19247. Ref T13109. When we receive an SSH request, generate a random unique ID for the request. Then thread it down through the process tree.
The immediate goal is to let the `ssh-exec` process coordinate with `commit-hook` process and log information about read and write lock wait times. Today, there's no way for `ssh-exec` to interact with the `PushEvent`, but this is the most helpful place to store this data for users.
Test Plan: Made pushes, saw the `PushEvent` table populate with a random request ID. Exported data and saw the ID preserved in the export.
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19249
Summary:
See PHI431. Ref T13102. An install is interested in a custom "non-sticky" accept action, roughly.
On the one hand, this is a pretty hacky patch. However, I suspect it inches us closer to T731, and I'm generally comfortable with exploring the realms of "Accept Next Update", "Unblock Without Accepting", etc., as long as most of it doesn't end up enabled by default in the upstream.
Test Plan:
- Accepted and updated revisions normally, saw accepts respect global stickiness.
- Modified the "Accept" action to explicitly be unsticky, saw nonsticky accept behavior after update.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19211
Summary:
See PHI439. This fills in additional information about Owners packages.
Also removes dead `primaryOwnerPHID`.
Test Plan: Called `owners.search` and reviewed the results. Grepped for `primaryOwnerPHID`.
Differential Revision: https://secure.phabricator.com/D19207
Summary:
Depends on D19182. Ref T11015. This changes `path` from `text255` to `longtext` because paths may be arbitrarily long.
It adds `pathDisplay` to prepare for display paths and storage paths having different values. For now, `pathDisplay` is copied from `path` and always has the same value.
Test Plan:
- Ran migration, checked database for sanity (all `pathDisplay` and `path` values identical).
- Added new paths, saw `pathDisplay` and `path` get the same values.
- Added an unreasonably enormous path with far more than 255 characters.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19183
Summary:
Depends on D19181. Ref T11015. This nukes duplicates from the table if they exist, then adds a unique key.
(Duplicates should not exist and can not be added with any recent version of the web UI.)
Test Plan:
- Tried to add duplicates with web UI, didn't have any luck.
- Explicitly added duplicates with manual `INSERT`s.
- Viewed packages in web UI and saw duplicates.
- Ran migrations, got a clean purge and a nice unique key.
- There's still no way to actually hit a duplicate key error in the UI (unless you can collide hashes, I suppose), this is purely a correctness/robustness change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19182
Summary: Ref T11015. This supports making path names arbitrarily long and putting a proper unique key on the table.
Test Plan:
- Migrated, checked database, saw nice digested indexes.
- Edited a package, saw new rows update with digested indexes.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19181
Summary: Ref T13099. Move most of the "Update" logic to modular transactions
Test Plan: Created and updated revisions. Flushed the task queue. Grepped for `TYPE_UPDATE`. Reviewed update transactions in the timeline and feed.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19175
Summary: Depends on D19173. Ref T13096. Adds an optional, disabled-by-default lock log to make it easier to figure out what is acquiring and holding locks.
Test Plan: Ran `bin/lock log --enable`, `--disable`, `--name`, etc. Saw sensible-looking output with log enabled and daemons restarted. Saw no additional output with log disabled and daemons restarted.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19174
