Summary:
These are a little out of date:
- Link to Starmap since it explicitly exists now.
- Link to "Planning" instead of the old task.
- Link to "Prioritization" instead of telling anyone to build stuff themselves.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14328
Summary:
Currently, Version numbers are sort of randomly shown on "All Settings" beacuse we didn't have any better place to put them.
Now that we have modules, expose them as a config module.
Test Plan:
{F906426}
Grepped for "all settings" to look for other references to the old location, but didn't get any relevant hits.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14327
Summary: Fixes T9598.
Test Plan:
- Used "Send Message" as a logged-in user.
- Used "Send Message" as a logged-out user. The action was disabled and clicking it popped up a login dialog.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9598
Differential Revision: https://secure.phabricator.com/D14326
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Fixes T6707. Users can currently do this:
- Log in to a service (like Facebook or Google) with account "A".
- Link their Phabricator account to that account.
- Log out of Facebook, log back in with account "B".
- Refresh the account link from {nav Settings > External Accounts}.
When they do this, we write a second account link (between their Phabricator account and account "B"). However, the rest of the codebase assumes accounts are singly-linked, so this breaks down elsewhere.
For now, decline to link the second account. We'll permit this some day, but need to do more work to allow it, and the need is very rare.
Test Plan:
- Followed the steps above, hit the new error.
- Logged back in to the proper account and did a link refresh (which worked).
{F905562}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6707
Differential Revision: https://secure.phabricator.com/D14319
Summary:
We don't use these for anything, we're inconsistent about recording them, and there's some mild interaction with privacy concerns and data retention. Every other log we store any kind of information in can be given a custom retention policy after recent GC changes.
If we did put this back eventually it would probably be better to store a session identifier anyway, since that's more granular and more detailed.
You can fetch this info out of access logs anyway, too.
Test Plan: Left a couple of comments.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14315
Summary:
Ref T182. Replace the total mess we had before with a sort-of-reasonable element.
This automatically updates using "javascript".
Test Plan:
{F901983}
{F901984}
Used "Land Revision", saw the land status go from "Waiting" -> "Working" -> "Landed" without having to mash reload over and over again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14314
Summary:
An attempt to resolve T9600.
- `PhabricatorPasteQuery` builds truncated snippet when requested using `needSnippet()`.
- `PhabricatorPasteSearchEngine` uses Paste snippet istead of content.
- `PhabricatorSourceCodeView` accepts truncated source and type instead of line limit.
Test Plan: Generated some content for Paste application and also added huge JSON oneliner. Checked Paste application pages in browser.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9600
Differential Revision: https://secure.phabricator.com/D14313
Summary: Ref T9532.
Test Plan: I don't have this configured locally but this seems very likely to be the correct fix. This list should be a list of PHIDs, but is a list of PHIDs followed by one PhabricatorRepository object.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T9532
Differential Revision: https://secure.phabricator.com/D14311
Summary: Ref T8628. Updates Search.
Test Plan: Did various searches, saved new queries, reordered, ran new queries.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D14268
Summary:
Fixes T9118. When populating some policy controls like "Default Can View" for repositories, we do some special logic to add object policies which are valid for the target object type.
For example, it's OK to set the default policy for an object which has subscribers to "Subscribers".
However, this logic incorrectly //removed// custom policies, so the form input ended up blank.
Instead, provide both object policies and custom policies.
Test Plan:
- Set default view policy to a custom policy.
- Hit "Edit" again, saw control correctly reflect custom policy after change.
- Set default edit policy to a different custom policy.
- Saved, edited, verified both policies stuck.
- Set both policies back.
- Checked some other object types to make sure object policies still work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9118
Differential Revision: https://secure.phabricator.com/D14310
Summary: We often just setError as an array even if it's only one error. This just makes the UI a little cleaner in these cases.
Test Plan: Remove all reviewers from a diff, see status error without list styling.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14308
Summary:
Basically similar to D13941 but a little more extreme:
- Really strongly emphasize reproducibility for bug reports, and set users up for rejection if they don't satisfy this.
- Really strongly emphasize problem descriptions for feature requests, and set users up for rejection.
- Get rid of various "please give us feedback"; we get plenty of feedback these days.
- Some modernization tweaks.
- Split the support document into:
- Stuff we actually support for free (security / good bug reports / feature requests).
- Stuff you can pay us for (hosting / consulting / prioritization).
- A nebulous "community" section, with appropriate (low) expectations that better reflects reality.
My overall goals here are:
- Set expectations better, so users don't show up in IRC expecting it to be a "great place to get amazing support" or whatever the docs said in 2011.
- Possibly move the needle slightly on bug reports / feature request quality, maybe.
Test Plan: Read changes carefully.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14305
Summary:
I'm going to do some version of D13941. Clean up extra links to the old document first.
These were just randomly links from various places that we no longer really want feedback on and/or are now better covered by other documents.
Test Plan:
- `grep`
- Reviewed Config/Welcome screen.
- Reviewed `uri.allowed-editor-protocols`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14303
Summary: Make Workboard initialization more restrictive.
Test Plan: Log out, see "No Workboard", Log in with permissions, see "New Workboard", Log in with notchad, see "No Workboard".
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7410
Differential Revision: https://secure.phabricator.com/D14306
Summary: Right now logged out users can enable a workboard on a project.
Test Plan: Log out, view a public project, click on Workboard, get not set up dialog. Click Cancel, return to project details.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14304
Summary:
Fixes T9599. When APC/APCu are not available, we fall back to a disk-based cache.
We try to share this cache across webserver processes like APC/APCu would be shared in order to improve performance, but are just kind of guessing how to coordinate it. From T9599, it sounds like we don't always get this right in every configuration.
Since this is complicated and error prone, just stop trying to do this. This cache has bad performance anyway (no production install should be using it), and we have much better APC/APCu setup instructions now than we did when I wrote this. Just using the PID is simpler and more correct.
Test Plan:
- Artificially disabled APC.
- Reloaded the page, saw all the setup stuff run.
- Reloaded the page, saw no setup stuff run (i.e., cache was hit).
- Restarted the webserver.
- Reloaded the page, saw all the setup stuff run.
- Reloaded again, got a cache hit.
I don't really know how to reproduce the exact problem with the parent PID not working, but from T9599 it sounds like this fixed the issue and from my test plan we still appear to get correct behavior in the standard/common case.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9599
Differential Revision: https://secure.phabricator.com/D14302
Summary: Ref T8628. Updates Conduit for handleRequest
Test Plan: Use Conduit, test list, method calls, try a query, post this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D14265
Summary:
Fixes T9596.
Was unable to navigate to a task in Maniphest.
Test Plan: navigate to that task.
Reviewers: #blessed_reviewers, epriestley, avivey, tycho.tatitscheff
Reviewed By: avivey, tycho.tatitscheff
Subscribers: tycho.tatitscheff, avivey, Korvin
Maniphest Tasks: T9596
Differential Revision: https://secure.phabricator.com/D14300
Summary: Fixes T9592.
Test Plan: Log out ! Navigates to a task. See the add button grey-ed out !
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9592
Differential Revision: https://secure.phabricator.com/D14299
Summary: Ref T182. Nothing fancy, just make these slightly easier to work with.
Test Plan: {F884754}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14295
Summary: If you `!assign cahd` when you meant to `!assign chad`, we'll hit an "Undefined variable: assign_phid" a little further down.
Test Plan: Eyeballed it. See IRC.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14291
Summary:
Fixes T9273. Remarkup has reasonably good fundamentals but the API is a giant pain to work with.
Provide a `PHUIRemarkupView` to make it easier. This object is way simpler to use by default.
It's not currently as powerful, but we can expand the power level later by adding more setters.
Eventually I'd expect to replace `PhabricatorRemarkupInterface` and `PhabricatorMarkupOneOff` with this, but no rush on those.
I converted a few callsites as a sanity check that it works OK.
Test Plan:
- Viewed remarkup in Passphrase.
- Viewed remarkup in Badges.
- Viewed a Conduit method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9273
Differential Revision: https://secure.phabricator.com/D14289
Summary: Fixes T9573. This incorrectly affected Phriction. I could restore it for only projects, but you didn't like the rule very much anyway and I don't feel strongly about it.
Test Plan: Unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9573
Differential Revision: https://secure.phabricator.com/D14287
Summary: Ref T9336. Links the timeline photo to user profile. Presume this always exists?
Test Plan: Review a few timelines, click on heads.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9336
Differential Revision: https://secure.phabricator.com/D14283
Summary: Ref T182. Make a reasonable attempt to get the commit message, author, and committer data correct.
Test Plan: BEHOLD: rGITTEST810b7f17cd0c909256a45d29a5062fcf417d0489
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14280
Summary: Fixes T9568. We just weren't setting this properly so it would default away from the proper value.
Test Plan:
- Edited a credential in a non-default space, edit form populated properly.
- Changed "Space", introduced an error, saved form, got error with sticky value for "Space" properly.
- Saved form with new space value.
- Created a new credential.
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T9568
Differential Revision: https://secure.phabricator.com/D14278
Summary:
Ref T9252. This fixes a bug from D14236. D14272 discusses the observable effects of the bug, primarily that the window for racing is widened from ~a few milliseconds to several minutes under our configuration.
This SQL query is missing a `GROUP BY` clause, so all of the resources get counted as having the same status (specifically, the alphabetically earliest status any resource had, I think). For test cases this often gets the right result since the number of resources may be small and they may all have the same status, but in production this isn't true. In particular, the allocator would sometimes see "35 destroyed resources" (or whatever), when the real counts were "32 destroyed resources + 3 pending resources".
Since this allocator behavior is soft/advisory this didn't cause any actual problems, per se (we do expect races here occasionally), it just made the race very very easy to hit. For example, Drydock in production currently has three pending working copy resources. Although we do expect this to be //possible//, getting 4 resources when the configured limit is 1 should be hard (not lightning strike / cosmic radiaion hard, but "happens once a year" hard).
Also exclude destroyed resources since we never care about them.
Test Plan:
Followed the plan from D14272 and restarted two Harbormaster workers at the same time.
After this patch was applied, they no longer created two different resources (we expect it to be possible for this to happen, just very hard).
We should still be able to force this race by putting something like `sleep(10)` right before the query, then `sleep(10)` right after it. That would prevent the allocators from seeing one another (so they would both think there were no other resources) and push us down the pathway where we exceed the soft limit.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14274
Summary:
Ref T9252. This is mostly a fix for an edge case from D14236. Here's the setup:
- There are no resources.
- A request for a new resource arrives.
- We build a new resource.
Now, if we were leasing an existing resource, we'd call `canAcquireLeaseOnResource()` before acquiring a lease on the new resource.
However, for new resources we don't do that: we just acquire a lease immediately. This is wrong, because we now allow and expect some resources to be unleasable when created.
In a more complex workflow, this can also produce the wrong result and leave the lease acquired sub-optimally (and, today, deadlocked).
Make the "can we acquire?" pathway consistent for new and existing resources, so we always do the same set of checks.
Test Plan:
- Started daemons.
- Deleted all working copy resources.
- Ran two working-copy-using build plans at the same time.
- Before this change, one would often [1] acquire a lease on a pending resource which never allocated, then deadlock.
- After this change, the same thing happens except that the lease remains pending and the work completes.
[1] Although the race this implies is allowed (resource pool limits are soft/advisory, and it is expected that we may occasionally run over them), it's MUCH easier to hit right now than I would expect it to be, so I think there's probably at least one more small bug here somewhere. I'll see if I can root it out after this change.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14272
Summary:
Ref T182. If 35 other things are configured completely correctly, make it remotely possible that this button may do something approximating the thing that the user wanted.
This primarily fleshes out the idea that "operations" (like landing, merging or cherry-picking) can have some beahavior, and when we run an operation we do whatever that behavior is instead of just running `git show`.
Broadly, this isn't too terrible because Drydock seems like it actually works properly for the most part (???!?!).
Test Plan: {F876431}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14270
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T182. This allows you to assign blueprints that a repository can use to perform working copy operations. Eventually, this will support "merge this" in Differential, etc.
This is just UI for now, with no material effects.
Most of this diff is just taking logic that was in the existing "Blueprints" CustomField and putting it in more general places so Diffusion (which does not use CustomFields) can also access it.
Test Plan:
- Configured repository automation for a repository.
- Removed repository automation for a repository.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14259
Summary: Fixes T9552. We need to set a questionID and the question object (for policy) when initializing a new Answer.
Test Plan: Write an answer that mentions another user.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9552
Differential Revision: https://secure.phabricator.com/D14263
Summary:
Fixes T9558. The recent changes to validate PHID fields don't work cleanly with this gross hack.
This can probably be unwound now but it will definitely get fixed in T9132 so I may just wait for that.
Test Plan: Edited a custom "users" field in Maniphest. This should only affect Maniphest because it has a weird hack.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9558
Differential Revision: https://secure.phabricator.com/D14264
Summary: Ref T182. Ref T9519. Some of what this describes doesn't exist yet, but should soon.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182, T9519
Differential Revision: https://secure.phabricator.com/D14258
Summary:
In Mercurial 3.2 the `locate` command was deprecated in favor of `files` command. This change updates the DiffusionLowLevelMercurialPathsQuery command to conditionally use `locate` or `files` based on the version of Mercurial used.
Closes T7375
Test Plan:
My test/develop Phabricator instance is setup to run Mercurial 3.5.1.
The test procedure to verify valid file listings are being returned:
1. I navigated to `http://192.168.0.133/conduit/method/diffusion.querypaths/`
2. I populated the following fields:
- path: `"/"`
- commit: `"d721d5b57fc9ef72e47ff9d4e0c583d74a46590c"`
- callsign: `"HGTEST"`
3. I submitted request and verified that result contained all files in the repository:
```
{
"0": "README",
"1": "alpha/beta/trifle",
"2": "test/Chupacabra.cow",
"3": "test/socket.ks"
}
```
I repeated the above steps after setting up Mercurial 2.6.2, which I installed in the following manner:
1. I downloaded Mercurial 2.6.2 source and run `make local` which will only compile it to work from its own directory (`/opt/mercurial-2.6.2`)
2. I linked `/usr/local/bin/hg -> /opt/mercurial-2.6.2/hg` (there's also a `/usr/bin/hg` which is a link to `/usr/local/bin/hg`)
3. I navigated to my home directory and verify that `hg --version` returns 2.6.2.
4. I restarted phabricator services (probably unnecessary).
With the Multimeter application active
1. I verified that `/usr/local/bin/hg` referred to version 2.6
2. I ran the same conduit call from the conduit application
3. I verified that `http://192.168.0.133/multimeter/?type=2&group=label` incremented values for `bin.hg locate`.
4. I swapped out mercurial versions for 3.5.1
5. I ran the same conduit call from the conduit application
6. I verified that `http://192.168.0.133/multimeter/?type=2&group=label` incremented values for `bin.hg files`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7375
Differential Revision: https://secure.phabricator.com/D14253
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9551. To set things up:
- Name a project `aa bb`. This will have the tag `aa_bb`.
- Try to visit `/tag/aa%20bb`.
Here's what happens now:
- You get an Aphront redirect error as it tries to add the trailing `/`. Add `phutil_escape_uri()` so that works again.
- Then, you 404, even though this tag is reasonably equivalent to the real project tag and could be redirected. Add a fallback to lookup, resolve, and redirect if we can find a hit for the tag.
This also fixes stuff like `/tag/AA_BB/`.
Test Plan: Visited URIs like `/tag/aa%20bb`, `/tag/aa%20bb/`, `/tag/Aa_bB/`, etc. None of them worked before and now they all do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14260
Summary:
Ref T9519. When acquiring leases on resources:
- Only consider resources created by authorized blueprints.
- Only consider authorized blueprints when creating new resources.
- Fail with a tailored error if no blueprints are allowed.
- Fail with a tailored error if missing authorizations are causing acquisition failure.
One somewhat-substantial issue with this is that it's pretty hard to figure out from the Harbormaster side. Specifically, the Build step UI does not show field value anywhere, so the presence of unapproved blueprints is not communicated. This is much more clear in Drydock. I'll plan to address this in future changes to Harbormaster, since there are other related/similar issues anyway.
Test Plan: {F872527}
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14254
Summary: Updates metamta for handleRequest
Test Plan: Unable to test this, but looks safe?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14256
Summary: Updates Harbormaster for handleRequest over processRequest
Test Plan: Went through various Harbormaster areas, buildables, actions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14255
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary:
If Mercurial 3.4+ is used to host repositories in Phabricator, any clients using 3.5+ will receive an exception after the bundle is pushed up. Clients will also fail to update phases for changesets pushed up.
Before directly responding to mercurial clients with all capabilities, this change filters out the 'bundle2' capability so the client negotiates using a legacy bundle wire format instead.
Test Plan:
Server: Mercurial 3.5
Client: Mercurial 3.4
Test with both HTTP and SSH protocols:
1. Create a local commit on client
2. Push commit to server
3. Verify the client emits something like:
```
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
```
Closes T9450
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9450
Differential Revision: https://secure.phabricator.com/D14241
Summary: These directories didn't get added to `.gitignore`, but should be.
Test Plan:
- Touched a dummy file in each directory.
- Ran `git status`.
- Didn't see the file show up.
Reviewers: chad, cspeckmim
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14249
