Summary:
Ref T3599
Go through everything, grep a bit, replace some bits.
Test Plan: Navigate around a bit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3599
Differential Revision: https://secure.phabricator.com/D6871
Summary: The logs bits still need some work but add crumbs/lists to everything else. Also build a propery DrydockResourceQuery.
Test Plan: Looked at lease list/detail; resource list/detail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4221
Summary: Minor updates to Drydock things to make them work better. In particular, after this patch working copies are correctly allocated or reused.
Test Plan: Ran "reparse.php --harbormaster <derp derp>", saw reuse of working copies when unleased resources were avilable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4216
Summary:
This is very preliminary and doesn't actually do anything useful. In theory, it uses Drydock to check out a working copy and run tests. In practice, it's not actually capable of running any of our tests (because of complicated interdependency stuff), but does check out a working copy and //try// to run tests there.
Adds various sorts of utility methods to various things as well.
Test Plan: Ran `reparse.php --harbormaster --trace <commit>`, observed attempt to run tests via Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015, T1049
Differential Revision: https://secure.phabricator.com/D4215
Summary:
Right now, Drydock gives out multiple leases to the same working copy and gives out leases to working copies with repository "P" in them when the user requested some other repository.
Add two callbacks:
- `canAllocateLease()` - allows a blueprint to reject a lease on a resource because of a fundamental incompatibility, like "it's a working copy with Phabricator in it, but the lease wants a working copy with Javelin in it".
- `shouldAllocateLease()` - allows a blueprint to reject a lease on a resource because of resource limits, like "only one active lease can own a working copy at a time".
Also cleaned up various other things.
Test Plan:
After implementing the callbacks, Drydock has the correct behavior:
- It gives multiple leases on `localhost`, but only one lease per working-copy resource.
- It does not grant leases on resources with repository X to requests for repository Y.
Ran `bin/drydock lease --type working-copy --repositoryID 12` and similar repeatedly and verified results in the web console.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D4166
Summary: This is missing a lot of features, but technically allows working copy allocation.
Test Plan: Ran `drydock lease --type working-copy --attributes repositoryID=12`, got a working copy of Phabricator allocated on disk.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3999
Summary: This does nothing fancy, just closes the resource and releases/breaks leases. They'll get cleaned up in some to-be-written GC process.
Test Plan: Closed resources from web UI and CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3998
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Tightens up a bunch of stuff:
- In `drydock lease`, pull and print logs so the user can see what's happening.
- Remove `DrydockAllocator`, which was a dumb class that did nothing. Move the tiny amount of logic it held directly to `DrydockLease`.
- Move `resourceType` from worker task metadata directly to `DrydockLease`. Other things (like the web UI) can be more informative with this information available.
- Pass leases to `allocateResource()`. We always allocate in response to a lease activation request, and the lease often has vital information. This also allows us to associate logs with leases correctly.
Test Plan: Ran `drydock lease --type host` and saw it perform a host allocation in EC2.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3870
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
- Still really really rough.
- Adds a full synchronous mode for debugging.
- Adds some logging.
- It can now allocate EC2 machines and put webroots on them in a hacky, terrible way.
- Adds a base query class.
Test Plan: oh hey look a test page? http://ec2-50-18-65-151.us-west-1.compute.amazonaws.com:2011/
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D2026
Summary: No big surprises here, delted the unused "DarkConsole" class.
Test Plan: Ran 'testEverythingImplemented' to verify I wasn't finalizing anything we extend.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1876
Summary: Run the actual resource allocation for Drydock out-of-process via the
task queue.
Test Plan: Ran "drydock_control.php", saw it insert a task and wait for task
completion. Ran "phd debug taskmaster" and saw it run the task.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1470
Summary:
Rough cut of Drydock. This is very basic and doesn't do much of use yet (it
//does// allocate EC2 machines as host resources and expose interfaces to them),
but I think the overall structure is more or less reasonable.
== Interfaces
Vision: Applications interact with Drydock resources through DrydockInterfaces,
like **command**, **filesystem** and **httpd** interfaces. Each interface allows
applications to perform some kind of operation on the resource, like executing
commands, reading/writing files, or configuring a web server. Interfaces have a
concrete, specific API:
// Filesystem Interface
$fs = $lease->getInterface('filesystem'); // Constants, some day?
$fs->writeFile('index.html', 'hello world!');
// Command Interface
$cmd = $lease->getInterface('command');
echo $cmd->execx('uptime');
// HTTPD Interface
$httpd = $lease->getInterface('httpd');
$httpd->restart();
Interfaces are mostly just stock, although installs might add new interfaces if
they expose different ways to interact with resources (for instance, a resource
might want to expose a new 'MongoDB' interface or whatever).
Currently: We have like part of a command interface.
== Leases
Vision: Leases keep track of which resources are in use, and what they're being
used for. They allow us to know when we need to allocate more resources (too
many sandcastles on the existing hosts, e.g.) and when we can release resources
(because they are no longer being used). They also give applications something
to hold while resources are being allocated.
// EXAMPLE: How this should work some day.
$allocator = new DrydockAllocator();
$allocator->setResourceType('sandcastle');
$allocator->setAttributes(
array(
'diffID' => $diff->getID(),
));
$lease = $allocator->allocate();
$diff->setSandcastleLeaseID($lease->getID());
// ...
if ($lease->getStatus() == DrydockLeaseStatus::STATUS_ACTIVE) {
$sandcastle_link = $lease->getInterface('httpd')->getURI('/');
} else {
$sandcastle_link = 'Still building your sandcastle...';
}
echo "Sandcastle for this diff: ".$sandcastle_link;
// EXAMPLE: How this actually works now.
$allocator = new DrydockAllocator();
$allocator->setResourceType('host');
// NOTE: Allocation is currently synchronous but will be task-driven soon.
$lease = $allocator->allocate();
Leases are completely stock, installs will not define new lease types.
Currently: Leases exist and work but are very very basic.
== Resources
Vision: Resources represent some actual thing we've put somewhere, whether it's
a host, a block of storage, a webroot, or whatever else. Applications interact
through resources by acquiring leases to them, and then getting interfaces
through these leases. The lease acquisition process has a side effect of
allocating new resources if a lease can't be acquired on existing resources
(e.g., the application wants storage but all storage resources are full) and
things are configured to autoscale.
Resources may themselves acquire leases in order to allocate. For instance, a
storage resource might first acquire a lease to a host resource. A 'test
scaffold' resource might lease a storage resource and a mysql resource.
Not all resources are auto-allocate: the entry-level version of Drydock is that
you manually allocate a couple boxes and configure them through the web console.
Then, e.g., 'storage' / 'webroot' resources allocate on top of them, but the
host pool itself does not autoscale.
Resources are completely stock, they are abstract shells representing any
arbitrary thing.
Currently: Resource exist ('host' only) but are very very basic.
== Blueprints
Vision: Blueprints contain instructions for building interfaces to, (possibly)
allocating, updating, managing, and destroying a specific type of resource in a
specific location. One way to think of them is that they are scripts for
creating and deleting resources. For example, the LocalHost, RemoteHost and
EC2Host blueprints can all manage 'host' resources.
Eventually, we will support more types of resources (storage, webroot,
sandcastle, test scaffold, phacility deployment) and more providers for resource
types, some of which will be in the Phabricator mainline and some of which will
be custom.
Blueprints are very custom and specific to application types, so installs will
define new blueprints if they are making significant use of Drydock.
Currently: They exist but have few capabilities. The stock blueprints do nearly
nothing useful. There is a technically functional blueprint for host allocation
in EC2.
== Allocator
This is just the actual code to execute the lease acquisition process.
Test Plan: Ran "drydock_control.php" script, it allocated a machine in EC2,
acquired a lease on it, interfaced with it, and then released the lease. Ran it
again, got a fresh lease on the existing resource.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D1454
