Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary: Ref T10860. This doesn't change anything, it just separates all this stuff out of `PhabricatorRepository` since I'm planning to add a bit more state to it and it's already pretty big and fairly separable.
Test Plan: Pulled, pushed, browsed Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15790
Summary:
Ref T4292. Sometimes, we may not have a working copy for a repository. The easiest way to get into this condition is to deactivate a repository.
We could try to clone + fetch in this case, but that's kind of complex, and there's an easy command that administrators can run manually. For now, just tell them to do that.
This affects the inactive repositories on `secure`, like rGITCOINS.
Test Plan: Removed working copy, got message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15786
Summary:
Ref T4292. When the daemons make a query for repository information, we need to make sure the working copy on disk is up to date before we serve the response, since we might not have the inforamtion we need to respond otherwise.
We do this automatically for almost all Diffusion methods, but this particular method is a little unusual and does not get this check for free. Add this check.
Test Plan:
- Made this code throw.
- Ran `bin/repository reparse --message ...`, saw the code get hit.
- Ran `bin/repository lookup-user ...`, saw this code get hit.
- Made this code not throw.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15783
Summary:
Ref T10751. Add support tooling for manually prying your way out of trouble if disaster strikes.
Refine documentation, try to refer to devices as "devices" more consistently instead of sometimes calling them "nodes".
Test Plan: Promoted and demoted repository devices with `bin/repository thaw`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15768
Summary:
Ref T10751. Make the UI more useful and explain what failure states mean and how to get out of them.
The `bin/repository thaw` command does not exist yet, I'll write that soon.
Test Plan: {F1238241}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15766
Summary: Ref T10751. This cleans this up so it's a little more modern, and fixes a possible bad access on the log detail page.
Test Plan: Viewed push log list, viewed push log detail.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10751
Differential Revision: https://secure.phabricator.com/D15765
Summary:
Ref T4292. Right now, repository versions only get marked when a write happens.
This potentially creates a problem: if I pushed all the sync code to `secure` and enabled `secure002` as a repository host, the daemons would create empty copies of all the repositories on that host.
Usually, this would be fine. Most repositories have already received a write on `secure001`, so that working copy has a verison and is a leader.
However, when a write happened to a rarely-used repository (say, rKEYSTORE) that hadn't received any write recently, it might be sent to `secure002` randomly. Now, we'd try to figure out if `secure002` has the most up-to-date copy of the repository or not.
We wouldn't be able to, since we don't have any information about which node has the data on it, since we never got a write before. The old code could guess wrong and decide that `secure002` is a leader, then accept the write. Since this would bump the version on `secure002`, that would //make// it an authoritative leader, and `secure001` would synchronize from it passively (or on the next read or write), which would potentially destroy data.
Instead:
- Refuse to continue in situations like this.
- When a repository is on exactly one device, mark it as a leader with version "0".
- When a repository is created into a cluster service, mark its version as "0" on all devices (they're all leaders, since the repository is empty).
This should mean that we won't lose data no matter how much weird stuff we run into.
Test Plan:
- In single-node mode, used `repository update` to verify that `0` was written properly.
- With multiple nodes, used `repository update` to verify that we refuse to continue.
- Created a new repository, verified versions were initialized correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15761
Summary: Ref T4292. When we write a push log, also log which node received the request.
Test Plan: {F1230467}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15759
Summary:
Ref T4292. We currently synchronize hosted, clustered, Git repositories when we receive an SSH pull or push.
Additionally:
- Synchronize before HTTP reads and writes.
- Synchronize reads before Conduit requests.
We could relax Conduit eventually and allow Diffusion to say "it's OK to give me stale data".
We could also redirect some set of these actions to just go to the up-to-date host instead of connecting to a random host and synchronizing it. However, this potentially won't work as well at scale: if you have a larger number of servers, it sends all of the traffic to the leader immediately following a write. That can cause "thundering herd" issues, and isn't efficient if replicas are in different geographical regions and the write just went to the east coast but most clients are on the west coast. In large-scale cases, it's better to go to the local replica, wait for an update, then serve traffic from it -- particularly given that writes are relatively rare. But we can finesse this later once things are solid.
Test Plan:
- Pushed and pulled a Git repository over HTTP.
- Browsed a Git repository from the web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15758
Summary:
Ref T4292. Before we write or read a hosted, clustered Git repository over SSH, check if another version of the repository exists on another node that is more up-to-date.
If such a version does exist, fetch that version first. This allows reads and writes of any node to always act on the most up-to-date code.
Test Plan: Faked my way through this and got a fetch via `bin/repository update`; this is difficult to test locally and needs more work before we can put it in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15757
Summary:
Ref T4292. This consolidates code for figuring out which user we should connect to hosts with.
Also narrows a lock window.
Test Plan: Browsed Diffusion, pulled and pushed through an SSH proxy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15754
Summary:
Ref T4292. Ref T10366. Depends on D15751. Today, generating repository commands is purely a function of the repository, so they use protocols and credentials based on the repository configuration.
For example, a repository with an SSH "remote URI" always generate SSH "remote commands".
This needs to change in the future:
- After T10366, repositories won't necessarily just have one type of remote URI. They can only have one at a time still, but the repository itself won't change based on which one is currently active.
- For T4292, I need to generate intracluster commands, regardless of repository configuration. These will have different protocols and credentials.
Prepare for these cases by separating out command construction, so they'll be able to generate commands in a more flexible way.
Test Plan:
- Added unit tests.
- Browsed diffusion.
- Ran `bin/phd debug pull` to pull a bunch of repos.
- Ran daemons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292, T10366
Differential Revision: https://secure.phabricator.com/D15752
Summary: Ref T4292. This will let the UI and future `bin/repository` tools give administrators more tools to understand problems when reporting or resolving them.
Test Plan:
- Pushed fully clean repository.
- Pushed previously-pushed repository.
- Forced write to abort, inspected useful information in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15748
Summary:
Ref T4292. Small fixes:
- There was a bug with the //first// write, where we'd write 1 but expect 0. Fix this.
- Narrow the window where we hold the `isWriting` lock: we don't need to wait for the client to finish.
- Release the lock even if something throws.
- Use a more useful variable name.
Test Plan:
- Made new writes to a fresh cluster repository.
- Made sequential writes.
- Made concurrent writes.
- Made good writes and bad writes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15747
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Ref T10748. This supports more transaction types in the modern editor and improves validation so Conduit benefits.
You can technically create repositories via `diffusion.repository.edit` now, although they aren't very useful.
Test Plan:
- Used `diffusion.repository.edit` to create and edit repositories.
- Used `/editpro/` to edit repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10748
Differential Revision: https://secure.phabricator.com/D15740
Summary: Ref T10748. Ref T10366. No support for editing and no impact on the UI, but get some of the basics in place.
Test Plan: {F1223279}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10748
Differential Revision: https://secure.phabricator.com/D15742
Summary: Ref T10748. Ref T10337. This technically implements this stuff, but it does not do anything useful yet. This skips all the hard stuff.
Test Plan:
- Technically used `diffusion.repository.search` to get repository information.
- Technically used `diffusion.repository.edit` to change a repository name.
- Used `editpro/` to edit a repository name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10337, T10748
Differential Revision: https://secure.phabricator.com/D15736
Summary:
This nearly works but I didn't have time to get back to it and it isn't stable enough to turn on in the cluster yet.
We have enough other stuff going out this week, so just disable it before `stable` gets cut. Should be ready by next week if things go well.
Test Plan: Fetched a Git SSH repo locally.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15731
Summary:
Ref T2783. This allows this worker to run on a machine different to the one that stores the repository, by routing the execution of Git over Conduit calls.
This API method is super gross, but fixing it isn't straightforward and it runs into other complicated considerations. We can fix it later; for now, just define it as "internal" to limit how much mess this creates.
"Internal" methods do not appear on the console.
Test Plan: Ran `bin/repository reparse --change <commit> --trace` on several commits, saw daemons make a Conduit call instead of running a `git` command.
Reviewers: hach-que, chad
Reviewed By: chad
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11874
Summary: Fixes T10789. If we aren't configured with a device, we never grabbed a lock in the first place, and should not expect one to be held.
Test Plan: Pushed non-cluster-configured Git SSH repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10789
Differential Revision: https://secure.phabricator.com/D15692
Summary:
Ref T4292. This mostly implements the locking/versioning logic for multi-master repositories. It is only active on Git SSH pathways, and doesn't actually do anything useful yet: it just does bookkeeping so far.
When we read (e.g., `git fetch`) the logic goes like this:
- Get the read lock (unique to device + repository).
- Read all the versions of the repository on every other device.
- If any node has a newer version:
- Fetch the newer version.
- Increment our version to be the same as the version we fetched.
- Release the read lock.
- Actually do the fetch.
This makes sure that any time you do a read, you always read the most recently acknowledged write. You may have to wait for an internal fetch to happen (this isn't actually implemented yet) but the operation will always work like you expect it to.
When we write (e.g., `git push`) the logic goes like this:
- Get the write lock (unique to the repository).
- Do all the read steps so we're up to date.
- Mark a write pending.
- Do the actual write.
- Bump our version and mark our write finished.
- Release the write lock.
This allows you to write to any replica. Again, you might have to wait for a fetch first, but everything will work like you expect.
There's one notable failure mode here: if the network connection between the repository node and the database fails during the write, the write lock might be released even though a write is ongoing.
The "isWriting" column protects against that, by staying locked if we lose our connection to the database. This will currently "freeze" the repository (prevent any new writes) until an administrator can sort things out, since it'd dangerous to continue doing writes (we may lose data).
(Since we won't actually acknowledge the write, I think, we could probably smooth this out a bit and make it self-healing //most// of the time: basically, have the broken node rewind itself by updating from another good node. But that's a little more complex.)
Test Plan:
- Pushed changes to a cluster-mode repository.
- Viewed web interface, saw "writing" flag and version changes.
- Pulled changes.
- Faked various failures, got sensible states.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15688
Summary:
Ref T4292. This adds some very basic cluster/device data to the new management view. Nothing interesting yet.
Also deal with disabled bindings a little more cleanly.
Test Plan: {F1214619}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4292
Differential Revision: https://secure.phabricator.com/D15685
Summary:
Ref T10756. When repositories are properly configured for the cluster (which is hard to set up today), be smart about which repositories are expected to exist on the current host, and only pull them.
This generally allows daemons to pretty much do the right thing no matter how many copies are running, although there may still be some lock contention issues that need to be sorted out.
Test Plan: {F1214483}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10756
Differential Revision: https://secure.phabricator.com/D15682
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Ref T9456. Some rough edges and we can't complete the build yet since I haven't written a webhook, but this mostly seems to be working.
Test Plan:
- Ran this build on some stuff.
- Ran a normal HTTP step build to make sure I didn't break that.
{F880301}
{F880302}
{F880303}
Reviewers: chad
Reviewed By: chad
Subscribers: JustinTulloss, joshma
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14286
Summary: Ref T7789. Make sure these get cleaned up when a repository is destroyed.
Test Plan:
- Created a new repository.
- Pushed some LFS data to it.
- Used `bin/remove destroy` to nuke it.
- Verified the LFS stuff was cleaned up and the underlying files were destroyed (`SELECT * FROM repository_gitlfsref`, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15493
Summary:
Ref T7789. This implements:
- A new table to store the `<objectHash, filePHID>` relationship between Git LFS files and Phabricator file objects.
- A basic response to `batch` commands, which return actions for a list of files.
Test Plan:
Ran `git lfs push origin master`, got a little further than previously:
```
epriestley@orbital ~/dev/scratch/poemslocal $ git lfs push origin master
Git LFS: (2 of 1 files) 174.24 KB / 87.12 KB
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
Git LFS operation "upload/b7e0aeb82a03d627c6aa5fc1bbfd454b6789d9d9affc8607d40168fa18cf6c69" is not supported by this server.
```
With `GIT_TRACE=1`, this shows the batch part of the API going through.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15489
Summary:
Ref T7789. This implements a (probably) usable "git-lfs-authenticate" on top of the new temporary token infrastructure.
This won't actually do anything yet, since nothing reads the tokens.
Test Plan:
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate'
phabricator-ssh-exec: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate x'
phabricator-ssh-exec: Unrecognized repository path "x". Expected a path like "/diffusion/X/" or "/diffusion/123/".
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22'
Exception: Expected `git-lfs-authenticate <path> <operation>`, but received too few arguments.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 y'
Exception: Git LFS operation "y" is not supported by this server.
```
```
$ ./bin/ssh-exec --phabricator-ssh-user admin --ssh-command 'git-lfs-authenticate diffusion/22 upload'
{"header":{"Authorization":"Basic QGdpdC1sZnM6NmR2bDVreWVsaXNuMmtnNXBtbnZwM3VlaWhubmI1bmI="},"href":"http:\/\/local.phacility.com\/diffusion\/22\/new-callsign-free-repository.git\/info\/lfs"}
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D15482
Summary:
Ref T10560. Reverts D15460. See that task for discussion: we dug up some more information to explain the behavior, and this key was just sort of sidestepping an analyze/cardinality estimate issue on the index.
With proper cardinality estimates it shouldn't be used, so just nuke it.
Test Plan: Ran `bin/storage adjust`, saw key drop.
Reviewers: eadler, chad
Reviewed By: chad
Maniphest Tasks: T10560
Differential Revision: https://secure.phabricator.com/D15486
Summary:
Ref T10560. I don't fully understand what MySQL is doing here, but it looks like this key improves the problematic dataset in practice.
(It makes sense that this key helps, I'm just not sure why the two separate keys and the UNION ALL are so bad.)
This key isn't hugely expensive to add, so we can try it and see if there are still issues.
Test Plan: Ran `bin/storage adjust`, saw key added to table. Used `SHOW CREATE TABLE ...` to verify the key exists. Used `EXPLAIN SELECT ...` to make sure MySQL actually uses it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10560
Differential Revision: https://secure.phabricator.com/D15460
Summary:
Every caller returns `true`. This was added a long time ago for Projects, but projects are no longer subscribable.
I don't anticipate needing this in the future.
Test Plan: Grepped for this method.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15409
Summary:
Ref T10457. This makes diffs/revisions show the revision as the buildable title, and commits show the commit as the title.
Previously, the title was "Buildable X".
Also makes icons/colors/labels more consitent.
Test Plan: {F1131885}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15355
Summary:
Ref T10449. Currently, we store classes (like "AlmanacClusterRepositoryServiceType") in the database.
Instead, store types (like "cluster.repository").
This is a small change, but types are a little more flexible (they let us freely reanme classes), a little cleaner (fewer magic strings in the codebase), and a little better for API usage (they're more human readable).
Make this minor usability change now, before we unprototype.
Also make services searchable by type.
Also remove old Almanac API endpoints.
Test Plan:
- Ran migration, verified all data migrated properly.
- Created, edited, rebound, and changed properties of services.
- Searched for services by service type.
- Reviewed available Conduit methods.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10449
Differential Revision: https://secure.phabricator.com/D15346
Summary: Fixes T10432. I missed these in making properties non-default.
Test Plan: Diffusion now works again in a cluster configuration.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10432
Differential Revision: https://secure.phabricator.com/D15337
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary:
Ref T4245. This is a prelude to removing them from the "create" screen.
Currently, if you try to delete the callsign you get an unceremonious database error, but the next diff (or maybe two) will permit that, so I didn't put any "this is required yada yada" text in.
This could also maybe use some big flashing warning lights and a "if you edit this, all your URIs break" but I'll save that for later.
Test Plan: Changed the callsign for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15304
Summary: Ref T4245. When creating new repositories, set a default local path based on the repository ID instead of callsign.
Test Plan:
- Created a new repository.
- Saw it get a reasonable, ID-based local path.
- Edited a repository to make sure the `applyFinalEffects()` wasn't doing anything whacky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15303
Summary: Ref T4245. Consolidates the URI parsing/rewriting logic so that repositories can be served from either `/diffusion/XYZ/` or `/diffusion/123/`, over both HTTP and SSH.
Test Plan:
- Pulled a Git repository by ID and callsign over HTTP and SSH.
- Pulled a Mercurial repository by ID and callsign over HTTP and SSH.
- Pulled a Subversion repository by ID and callsign over SSH (no HTTP support for SVN).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15302
Summary:
Ref T4245. Make `/diffusion/123/` work, but redirect the user to `/diffusion/XYZ/` if the repository has a callsign.
(Right now, every repository has a callsign, so this always redirects.)
Also redirect `/R123:abcdef` if the repository has a callsign.
Also also, move the Pull garbage collector somewhere more sensible.
Test Plan:
- Added test coverage.
- Visited `/diffusion/1/`, was redirected.
- Visited `/diffusion/R1:abcdef`, was redirected.
- Browsed Diffusion normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15301
Summary:
Ref T4245. Two effects:
- First, let hooks work for future repositories without callsigns.
- Second, provide a better error when users push directly to hosted repositories.
Test Plan: Ran `bin/commit-hook PHID-REPO-xxx`.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15293
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T10228. This is currently quite limited:
- No UI.
- No SSH support.
My primary goal is to debug the issue in T10228. In the long run we can expand this to be a bit fancier.
Test Plan:
Made various valid and invalid clones, got sucess responses and not-so-successful responses, viewed the log table for general corresponding messages and broad sanity.
Ran GC via `bin/phd debug trigger`, no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15127
Summary:
Ref T6183. Ref T10054. Historically, only members could watch projects because there were some weird special cases with policies. These policy issues have been resolved and Herald is generally powerful enough to do equivalent watches on most objects anyway.
Also puts a "Watch Project" button on the feed panel to make the behavior and meaning more obvious.
Test Plan:
- Watched a project I was not a member of.
- Clicked the feed watch/unwatch button.
{F1064909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6183, T10054
Differential Revision: https://secure.phabricator.com/D15063
Summary: Ref T4245. Fixes T10172. These regular expressions were simply incorrect: they intend `<start> (form one | form two) <end>` but were written as `(<start> form one) | (form two <end>)` which allowed stuff like "R2/R13" to be interpreted as a monogram because it matches `(<start> form one)`.
Test Plan: Parsed commit `ba46ffa6169c` from RTEMS repository, see T10172. Before patch, got an identical trace; after patch, clean import.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245, T10172
Differential Revision: https://secure.phabricator.com/D15049
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary: Fixes T8826. Git tracks an "author date", which may be different from the "committed date". We don't currently extract/show this; do so.
Test Plan: {F1059235}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8826
Differential Revision: https://secure.phabricator.com/D14995
Summary: Ref T4245. Full commit display names (like `rPaaaa`) are going to be obnoxious soon in some cases (e.g., `rPaaaa` becomes `R123:aaaa`, which is much uglier) so reduce how often we show the repository in cases where it isn't really necessary to include it.
Test Plan:
- Saw no more `rX` on repository list view for Git/Mercurial (still present for Subversion).
- Saw no more `rX` on various repository detail views, except when referencing other commits (e.g., mentions).
- Grepped for removed `getShortName()`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14990
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Ref T4245. This allows `bin/repository update bread` to work, in addition to `rBREAD`, `R123`, `123`, `BREAD`, etc., if a repository has a short name set.
This primarily affects CLI commands (like `bin/repository`) and Conduit API calls. It has no normal user-facing impact.
Test Plan: Ran `bin/repository update bread` and such.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14988
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
Ref T9319. See D14967. As before, this is making a deeply-buried, complex operation easier to test by providing a CLI command.
This adds `bin/differential attach-commit rXnnnn Dnnnn` to pretend that `rXnnnn` was just committed and matched `Dnnnn`.
Test Plan:
- Ran `bin/differential attach-commit X Y` for several different values, saw updates in the UI.
- Faked the message parser to make sure stuff still worked there.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9319
Differential Revision: https://secure.phabricator.com/D14968
Summary: Fixes T9701. I don't want to try to autofix this because destroying the directory could destroy important files, but we can improve the error message.
Test Plan: Faked a failure, ran `repository update X`, got a more tailored error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9701
Differential Revision: https://secure.phabricator.com/D14971
Summary:
Ref T9319. When we discover a commit, we sometimes update the corresponding revision with a "this is the actual committed change" diff and send out a link to the changes between review and commit.
This is currently very difficult to test, because it only happens the first time and you have to either go set up a bunch of objects or add a bunch of special casing to the parser to hit the workflow.
I'm making some changes to how it pulls file content. To make those changes easier to test, first start extracting this stuff so the code can be run with `bin/differential extract ...` instead of needing to do a bunch of more complicated setup steps.
Test Plan:
- Ran `bin/differential extract ...` to extract diffs from commits.
- Forced my way through the daemon workflow by faking out a bunch of flags, got a clean extract + attach + update. After this patch, this should rarely be necessary.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9319
Differential Revision: https://secure.phabricator.com/D14967
Summary:
Fixes T4366. Two years ago, Facebook put 16,000 files in a directory. Today, the page has nearly loaded.
Paginate large directories.
Test Plan:
- Viewed home and browse views in Git, Mercurial and Subversion.
I put an artificially small page size (5) on home:
{F1055653}
I pushed 16,000 files to a directory and paged through them. Here's the last page, which rendered in about 200ms:
{F1055655}
Our behavior is a bit better than GitHub here, which shows only the first 1,000 files, disables pagination, and can't retrieve history for the files:
{F1055656}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4366
Differential Revision: https://secure.phabricator.com/D14956
Summary:
Ref T2450. Ref T9319. This is still a bit messy, but not quite so bad as it was: instead of using a single call to get both blame information and file content, use `diffusion.blame` for blame information.
This will make optimizations to both blame and file content easier.
Test Plan: Viewed a bunch of blame (color on/off, blame on/off).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2450, T9319
Differential Revision: https://secure.phabricator.com/D14958
Summary: Fixes T9191. This is pretty fluff but doesn't hurt anything, I guess.
Test Plan: Viewed repository list, saw an importing repository get a little icon.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9191
Differential Revision: https://secure.phabricator.com/D14950
Summary:
Ref T4245. This adds support for both ID-based and callsign-based routes, although the ID-based routes don't occur anywhere.
Also moves toward simplifying the DiffusionRequest stuff.
Test Plan: Visited normal callsign-based commit pages; visited new ID-based commit pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14940
Summary: Ref T4245. This further reduces the reliance on callsigns in Diffusion.
Test Plan:
- Pretty reasonable test coverage already exists.
- Browsed repository list, browse view, history view, content view, change view, commit view, tag view, branch view of repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14937
Summary: Ref T4245. These mostly relate to building URIs.
Test Plan: Tried to hunt down as many of these in the UI as I could. Some are a bit tricky but they should be low-risk.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14933
Summary:
Ref T4245. This was obsoleted long ago and has no callers in Phabricator or Arcanist.
Also some minor cleanup.
Test Plan: `grep` for callers everywhere.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14930
Summary: Ref T4245. More of the same, just narrowing down the easy cases.
Test Plan:
- Called `diffusion.querycommit`.
- Browsed branches.
- Browsed repository.
- Browsed directory.
- Searched for stuff.
- Viewed a commit.
- Viewed a file diff.
- Edited a commit.
- Viewed history.
- Viewed tags.
- Viewed push log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14929
Summary: Ref T4245. These are all descriptive or UI-facing.
Test Plan:
- Ran `bin/repository pull ...` with various identifiers.
- Ran `bin/repository mirror ...` with various identifiers.
- Ran `bin/repository discover ...` with various identifiers.
- Ran `bin/phd debug pull X Y --not Z` with various identifiers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14926
Summary:
Ref T4245. Prepare these scripts for a callsign-free world. This also makes them more flexible and easier to use.
The following are now valid ways to identify a repository for these scripts: ID (`3`), PHID (`PHID-REPO-wxyz`), R<ID> (`R3`), r<CALLSIGN> (`rSKYNET`), CALLSIGN (`SKYNET`).
In the future, a human-readable label (`skynet`) may also become valid.
Test Plan:
- Ran `bin/repository reparse --all ...` with `rX`, `X`, `3`, `R3`.
- Ran `bin/repository reparse --change ...` with `rXaaa`, including short versions.
- Ran `bin/repository update ...` with `rX`, `X`, `3`, `R3`.
- Ran `bin/repository refs ...` with various identifiers.
- Ran `bin/repository pull ...` with various identifiers.
- Ran `bin/repository mirror ...` with various identifiers.
- Ran `bin/repository mark-imported ...` with various identifiers.
- Ran `bin/repository list`.
- Ran `bin/repository importing ...` with various identifiers and examined output.
- Ran `bin/repository edit ...` with various identifiers.
- Ran `bin/repository discover ...` with various identifiers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14924
Summary: Ref T4245. Before doing any hard work here, we can dramatically reduce the number of things that make calls to `getCallsign()` to make navigating things easier. Almost all of them only care about a monogram, URI, or display name.
Test Plan:
- Searched for `r uniquename` in jump nav.
- Ran `bin/repository reparse --change rXXXyyyyy --trace`, observed query against bad commit table.
- Ran `bin/search index rXXXyyyy --trace --force`, observed proper title when indexing commit.
- Browed repository list, saw proper `rXXX` and appropriate link targets.
- Mentioned `rXXX` in Remarkup, got a link to the right place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14923
Summary: Ref T9979. This simplifies/standardizes the code a bit, but mostly gives us more consistent class names and structure.
Test Plan:
- Used `bin/search index --type ...` to index documents of every indexable type.
- Searched for documents by unique text, found them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14842
Summary:
Ref T9979. This is currently hard-coded but can be done in a generic way.
This has one minor behavioral changes: answer text is no longer included in the question text index in Ponder. I'm not planning to accommodate that for now since I don't want to dig this hole any deeper than I already have. This behavior should be different anyway (e.g., index the answer, then show the question in the results or something).
Test Plan:
- Put a unique word in a Maniphest comment.
- Searched for the word.
- Found the task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14837
Summary:
Ref T9890. Ref T9979. Several adjacent goals:
- The `SearchEngine` vs `ApplicationSearchEngine` thing is really confusing. There are also a bunch of confusing class names and class relationships within the fulltext indexing. I want to rename these classes to be more standard (`IndexEngine`, `IndexEngineExtension`, etc). Rename `SearchIndexer` to `IndexEngine`. A future change will rename `SearchEngine`.
- Add the index locks described in T9890.
- Structure things a little more normally so future diffs can do the "EngineExtension" thing more cleanly.
Test Plan:
Indexing:
- Renamed a task to have a unique word in the title.
- Ran `bin/search index Txxx`.
- Searched for unique word.
- Found task.
Locking:
- Added a `sleep(10)` after the `lock()` call.
- Ran `bin/search index Txxx` in two windows.
- Saw first one lock, sleep 10 seconds, index.
- Saw second one give up temporarily after failing to grab the lock.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9890, T9979
Differential Revision: https://secure.phabricator.com/D14834
Summary: Adds basic NUX to Dashboards, Herald, Repositories, Maniphest. Note Herald and Dashboard Panels don't fine the nux for some reason, assume they will when modernized?
Test Plan: Read text, click buttons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14844
Summary: Fixes T9966. In this unusual, difficult-to-reach case, we throw `Exception` (which has no censoring) instead of `CommandException` (which has censoring). Throw `CommandException` instead.
Test Plan:
- Hacked up a bunch of stuff in order to hit this: disabled origin validation, origin correction, and pointed repository at a bad domain.
- Verified message is now censored correctly.
{F1022217}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9966
Differential Revision: https://secure.phabricator.com/D14745
Summary:
Ref T9952. This adds a typeahead so you can pick a branch to target.
It does not choose a default branch, the user must pick a branch explicitly.
Test Plan:
- Landed rGITTESTd587fada48fc to `master` (by typing "master").
- Landed rGITTEST86c339b2ef01 to `notmaster` (by typing "notmaster").
{F1020531}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14733
Summary: Ref T9952. This will let me put a "Branch: [____]" control on the "Land Revision" dialog so users can choose a branch to target.
Test Plan: Used `/typeahead/class/` to vet basic behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14732
Summary: Ref T9952. See discussion there. This change is primarily aimed at letting me build a typeahead of branches in a repository so that we can land to arbitrary branches a few diffs from now.
Test Plan:
- Ran migrations.
- Verified database populated properly with PHIDs (`SELECT * FROM repository_refcursor;`).
- Ran `bin/repository update`.
- Viewed a Git repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14731
Summary: Fixes T9941. I think someone from Perforce emailed us about 10 years ago and I added this link in response, but I haven't seen other interest in Perforce since then. Link is now dead.
Test Plan:
- {nav Diffusion > Create Repository > Import Existing}, no more Perforce link.
- Grepped for `perforce`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9941
Differential Revision: https://secure.phabricator.com/D14720
Summary:
This diff adds a new mode argument to the Diffusion Conduit API with two options:
- "overwrite": the default, maintains the current behavior of deleting all coverage
in the specified branch before uploading the new coverage
- "update": does not delete old coverage, but will overwrite previous
coverage information if it's for the same file and commit
`DiffusionRequest::loadCoverage` already loads a file's coverage from the
latest available commit, so uploading coverage for different files in different
commits with "update" will result in seeing the latest uploaded coverage in
Diffusion.
Test Plan: manual local verification
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14428
Summary:
Exposes the serve-over-http and serve-over-ssh options for a repository
to the `bin/repository edit` endpoint.
Test Plan: Ran `bin/repository` with the new options over several hundred repos
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, chasemp, 20after4, epriestley
Differential Revision: https://secure.phabricator.com/D14250
Summary:
Ref T182. This doesn't do anything interesting yet and is mostly scaffolding, but here's roughly the workflow. From previous revision, you can configure "Repository Automation" for a repository:
{F875741}
If it's configured, a new "Land Revision" button shows up:
{F875743}
Once you click it you get a big warning dialog that it won't work, and then this shows up at the top of the revision (completely temporary/placeholder UI, some day a nice progress bar or whatever):
{F875747}
If you're lucky, the operation eventually sort of works:
{F875750}
It only runs `git show` right now, doesn't actually do any writes or anything.
Test Plan:
- Clicked "Land Revision".
- Watched `phd debug task`.
- Saw it log `git show` to output.
- Verified operation success in UI (by fiddling URL, no way to get there normally yet).
Reviewers: chad
Reviewed By: chad
Subscribers: revi
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14266
Summary:
Ref T182. This allows you to assign blueprints that a repository can use to perform working copy operations. Eventually, this will support "merge this" in Differential, etc.
This is just UI for now, with no material effects.
Most of this diff is just taking logic that was in the existing "Blueprints" CustomField and putting it in more general places so Diffusion (which does not use CustomFields) can also access it.
Test Plan:
- Configured repository automation for a repository.
- Removed repository automation for a repository.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14259
Summary:
In Mercurial 3.2 the `locate` command was deprecated in favor of `files` command. This change updates the DiffusionLowLevelMercurialPathsQuery command to conditionally use `locate` or `files` based on the version of Mercurial used.
Closes T7375
Test Plan:
My test/develop Phabricator instance is setup to run Mercurial 3.5.1.
The test procedure to verify valid file listings are being returned:
1. I navigated to `http://192.168.0.133/conduit/method/diffusion.querypaths/`
2. I populated the following fields:
- path: `"/"`
- commit: `"d721d5b57fc9ef72e47ff9d4e0c583d74a46590c"`
- callsign: `"HGTEST"`
3. I submitted request and verified that result contained all files in the repository:
```
{
"0": "README",
"1": "alpha/beta/trifle",
"2": "test/Chupacabra.cow",
"3": "test/socket.ks"
}
```
I repeated the above steps after setting up Mercurial 2.6.2, which I installed in the following manner:
1. I downloaded Mercurial 2.6.2 source and run `make local` which will only compile it to work from its own directory (`/opt/mercurial-2.6.2`)
2. I linked `/usr/local/bin/hg -> /opt/mercurial-2.6.2/hg` (there's also a `/usr/bin/hg` which is a link to `/usr/local/bin/hg`)
3. I navigated to my home directory and verify that `hg --version` returns 2.6.2.
4. I restarted phabricator services (probably unnecessary).
With the Multimeter application active
1. I verified that `/usr/local/bin/hg` referred to version 2.6
2. I ran the same conduit call from the conduit application
3. I verified that `http://192.168.0.133/multimeter/?type=2&group=label` incremented values for `bin.hg locate`.
4. I swapped out mercurial versions for 3.5.1
5. I ran the same conduit call from the conduit application
6. I verified that `http://192.168.0.133/multimeter/?type=2&group=label` incremented values for `bin.hg files`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T7375
Differential Revision: https://secure.phabricator.com/D14253
Summary:
Fixes T8728. As far as I can tell, I simply got this wrong in D11826. This is not the proper name for the preference.
That change primarily focused on the "spammy junk during import" issue, and the code did get the importing flag right. It looks like my testing in D11827 focused on "during import" and just missed this case.
Test Plan: Grepped for `disable-herald`. Grepped for `herald-disable`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8728
Differential Revision: https://secure.phabricator.com/D14181
Summary: Ref T9252. This is still crude in a few ways but basically works, at least for commits.
Test Plan:
- Made a build plan with just this build step.
- Ran `bin/harbormaster build --plan 10 ...` on a commit.
- It actually built a working copy, leased it, took no action, and released the lease. MAGIC~~~
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14160
Summary:
Ref T9458. This is basically the same as D13319, but the "Tags" field didn't get covered in that change.
Specifically, the issue is:
- We try to generate mail to a disabled user (later, we'll drop it without delivering it, but that filtering doesn't happen yet).
- The disabled user doesn't have permission to use Conduit (or any other Conduit-related problem occurs).
- We fail here, then retry generating the mail again later.
Instead, just degrade to not building the field and showing what went wrong.
Test Plan:
- Pushed some commits, saw mail generate.
- Added a fake exception to the field, saw the mail generate with an error message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9458
Differential Revision: https://secure.phabricator.com/D14142
Summary: As described in T7959, it looks like Diffusion does not provide Mercurial the required HTTP credentials when pulling from an external repository.
Test Plan: Add an external Mercurial repository to Diffusion, that requires HTTP authentication. A private BitBucket repository for example.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Projects: #mercurial, #diffusion
Differential Revision: https://secure.phabricator.com/D14092
Summary:
Fixes T9279. Modernizes the SearchEngine and Query classes. User-facing changes:
- Added order by commit date, default to order by commit date with newest commits first.
- Added explicit "Needs Audit by".
- Added new `packages(...)` typeahead function.
- Picked up automatic subscribers, projects, and order fields.
This changes behavior a little bit: we previously attempted to exclude, e.g., commits which a package you own needs to audit, but which you have resigned from. This is difficult in general and I think it needs a more comprehensive solution. This shouldn't impact users much, anyway.
Test Plan: {F767628}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9279
Differential Revision: https://secure.phabricator.com/D14013
Summary:
Fixes T7370. Two changes:
- Make the default to show nothing, instead of showing all the data. This is a better default because the data is sometimes sensitive. Workers should have to opt in to revealing it.
- For TargetWorkers, link to the target (technically the build, for now, since there's no dedicated target detail page).
Test Plan: {F698325}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7370
Differential Revision: https://secure.phabricator.com/D13845
Summary: Ref T7149. These formalize the local path adjustment step for cluster imports, rather than relying on an ad-hoc script.
Test Plan: Used `list-paths` and `move-paths` to list and move repositories.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D13621
Summary: Fixes T7604. This is the big scary change which drops the "arcanist project" fields from the database permanently.
Test Plan:
`grep`ped for the following to ensure that I had found all remaining references:
- `/arcanistProject/i`
- `/arcanist_project/i`
- `/projectName/i`
- `/project_name/i`
- `/project_id/i`
WARNING: Wait at least one month before landing this.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D12899
Summary: Return `$this` from setter methods for consistency. I started writing a [[https://secure.phabricator.com/differential/diff/32506/ | linter rule]] to detect this, but I don't think it is trivial to do this properly.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13422
Summary: Ref T8099, functionally I prefer to be able to set anything 'table-like' with `setTable` for design consistency. This looses the restriction and did some light grepping for other missed cases.
Test Plan: Test new UI, grep for other missing cases.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13471
Summary: Fixes T8698. This isn't actually a table.
Test Plan: Viewed push log, no more fatal.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8698
Differential Revision: https://secure.phabricator.com/D13468
Summary:
Ref T8493. Diffusion is probably the strongest upstream use case we have for Spaces right now, so I want to get us on it to kick the tires a bit.
Small amount of hackiness around the multi-page form thing but it shouldn't create any problems.
Test Plan:
- Created a new repo.
- Edited a repo.
- Tried invalid edits, saw value preserved.
- Viewed edit full detail screen, saw space info.
- Viewed repo detail view, saw space.
- Viewed repo list view, saw space.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8493
Differential Revision: https://secure.phabricator.com/D13414
Summary: Fixes T6839. Sometimes, worker tasks go astray for whatever reason. This automates the step of `bin/repository importing | xargs | mangle mangle | bin/repostiory reparse`.
Test Plan: Ran various flavors of the command, got good looking results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6839
Differential Revision: https://secure.phabricator.com/D13362
Summary: Ref T8099. This adds a new class which all search engines return for layout. I thought about this a number of ways, and I think this is the cleanest path. Each Engine can return whatever UI bits they needs, and AppSearch or Dashboard picks and lays the bits out as needed. In the AppSearch case, interfaces like Notifications, Calendar, Legalpad all need more custom layouts. I think this also leaves a resonable path forward for NUX as well. Also, not sure I implemented the class correctly, but assume thats easy to fix?
Test Plan: Review and do a search in each application changed. Grep for all call sites.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13332
Summary: Fixes T8352. Associate Diviner books and atoms with a repository. This relationship is not really surfaced anywhere in the UI but provides metadata that contextualises search results. Depends on D13091.
Test Plan: Ran `diviner generate --repository ARC` and then went to `/diviner/book/arcanist/`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7703, T8352
Differential Revision: https://secure.phabricator.com/D13070
Summary:
Ref T8574. This could fail because the target is disabled (as here), or doesn't have access to the API, or the API request needs to be satisfied by a different host which isn't available.
In any of these cases, just show the failure and continue generating the mail. This field isn't important enough to block the mail, and many of these errors are permanent.
(I'll follow up on T8574 with some more permanent ideas to address this class of issue.)
Test Plan: Faked API call failure, generated mail, saw clean generation of mail with a failure message.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8574
Differential Revision: https://secure.phabricator.com/D13319
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary: See also D13186.
Test Plan: Ran `arc unit --everything`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D13201
Summary: Ref T8441. I want to use `PhabricatorSearchField` for a better, more useful object.
Test Plan: `grep`, `arc lint`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8441
Differential Revision: https://secure.phabricator.com/D13168
Summary:
Ref T8424. This adds a standard KeyValueCache to serve as a request cache.
In particular, I need to cache Spaces (they are frequently accessed, sometimes by multiple viewers) but not have them survive longer than the scope of one request.
This request cache is explicitly destroyed by each web request and each daemon request.
In the very long term, building this kind of construct supports reusing PHP interpreters to run web requests (see some discussion in T2312).
Test Plan:
- Added and executed unit tests.
- Ran every daemon.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8424
Differential Revision: https://secure.phabricator.com/D13153
Summary: Ref T6367.
Test Plan:
- Added and executed unit tests.
- Sent mail to A (en_US) and B (en_A*).
- Got one mail in English and one mail in ENGLISH.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6367
Differential Revision: https://secure.phabricator.com/D13142
Summary:
Ref T6367. Removes `multiplexMail()`!
We can't pass a single body into a function which splits it anymore: we need to split recipients first, then build bodies for each recipient list. This lets us build separate bodies for each recipient's individual translation/access levels.
The new logic does this:
- First, split recipients into groups called "targets".
- Each target corresponds to one actual mail we're going to build.
- Each target has a viewer (whose translation / access levels will be used to generate the mail).
- Each target has a to/cc list (the users who we'll ultimately send the mail to).
- For each target, build a custom mail body based on the viewer's access levels and settings (language prefs not actually implemented).
- Then, deliver the mail.
Test Plan:
- Read new config help.
Then did a bunch of testing, primarily with `bin/mail list-outbound` and `bin/mail show-outbound` (to review generated mail), `bin/phd debug taskmaster` (to run daemons freely) and `bin/worker execute --id <id>` (to repeatedly test a specific piece of code after identifying an issue).
With `one-mail-per-recipient` on (default):
- Sent mail to multiple users.
- Verified mail showed up in `mail list-outbound`.
- Examined mail with `mail show-outbound`.
- Added a project that a subscriber could not see.
- Verified it was not present in `X-Phabricator-Projects`.
- Verified it was rendered as "Restricted Project" for the non-permissioned viewer.
- Added a subscriber, then changed the object policy so they could not see it and sent mail.
- Verified I received mail but the other user did not.
- Enabled public replies and verified mail generated with public addresses.
- Disabld public replies and verified mail generated with private addresses.
With `one-mail-per-recipient` off:
- Verified that one mail is sent to all recipients.
- Verified users who can not see the object are still filtered.
- Verified that partially-visible projects are completely visible in the mail (this violates policies, as documented, as the best available compromise).
- Enabled public replies and verified the mail generated with "Reply To".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: carlsverre, epriestley
Maniphest Tasks: T6367
Differential Revision: https://secure.phabricator.com/D13131
Summary: Fixes T7603. This application is no longer used.
Test Plan: Went to `/repository/` and got a 404.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Maniphest Tasks: T7603
Differential Revision: https://secure.phabricator.com/D12734
Summary:
Ref T7984. With this, an install can add an ExternalSymbolsSource to src/extensions, which will include whatever
source they have.
Test Plan: search for php and python builtins.
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7984
Differential Revision: https://secure.phabricator.com/D13036
Summary:
Ref T8320. Fixes T8317. Fixes T2831. Fixes T8073. Fixes T7127.
There was a bug with this line:
for ($ii = 0; $ii < count($paths); $ii++) {
...because the array may be sparse if there have been deletes, so `count($paths)` might be 3, but the real keys could be `1`, `5` and `6`. I think this was the primary issue behind T7127.
The old Editor did a lot of work to try to validate paths. When a path failed to validate, it silently discarded it. This was silly and pointless: it's incredibly bad UX; and it's totally fine if users saves "invalid" paths. This was likely the cause of T8317, and probably the cause of T8073.
T2831 I'm less sure about, but I can't reproduce it and I rewrote all the logic so I suspect it's gone.
This also records and shows edits, so if stuff does keep happening it should be more clear what's going on.
I removed some adjacent stuff:
- I removed the ability to delete packages. I'll add "disable" in a future diff, plus `bin/remove destroy`, like other objects. Getting rid of this now let me get rid of all the mail stuff.
- I removed "path validation" where packages would try to automatically update in response to commits. This doesn't necessarily make sense in Git/Mercurial, is sketchy, could easily have been the source of T2831, and seems generally complicated and not very valuable. We could maybe restore it some day, but I'd like to get Owners stable before trying to do crazy stuff like that.
Test Plan: {F437687}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8317, T8073, T7127, T2831, T8320
Differential Revision: https://secure.phabricator.com/D13032
Summary:
Ref T8238. This allows configuration of a "staging area" for Git repositories, which is the URI to some Git repository (possibly the same repository).
If a staging area is configured, `arc` will push a copy of anything it creates a diff for there (see next revision). This primarily makes handoff to build systems easier.
This is a bit leaky and I intend for it to eventually be positioned as a less-preferred solution, but from the perspective of build systems it's the same as the real (virtual ref) solution that I want to build.
Test Plan: Ran `arc diff` with various flags, saw appropriate changes copied into the staging area. See also discussion in T8238.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: cburroughs, epriestley
Maniphest Tasks: T8238
Differential Revision: https://secure.phabricator.com/D13019
Summary: Ref T7603. Ref T7604. There is no need for these controllers anymore as the "Arcanist Project" data is not used anywhere. Depends on D12894 and D12898.
Test Plan: Went to `/repository/project/edit/2/` and got a 404.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7603, T7604
Differential Revision: https://secure.phabricator.com/D12897
Summary:
- Give the fields names and descriptions.
- When new, default-disabled fields are added, disable them by default even if there's already a config.
- Be a bit less hacky about `$faux_spec`.
Test Plan: {F432383}
Reviewers: joshuaspence, fabe
Reviewed By: fabe
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D13006
Summary: This is vaguely related to T5791. Add a "REPOSITORY" header to audit emails so that they can be filtered in Gmail.
Test Plan: Commented on an audit and used `./bin/mail show-outbound` to inspect outbound email.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: fabe, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12997
Summary:
Includes a new Block in Herad emails which tells the user about which commits were merged in a merge commit
Otherwise the email would just say "Merge branch XYZ". Ref T8295
Test Plan: imported various commits (and merges) and watched resulting herald emails for all of them
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8295
Differential Revision: https://secure.phabricator.com/D12993
Summary: These format strings use `%d` instead of `%s`.
Test Plan: Eyeball it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12996
Summary: Ref T7604. Add `encoding` information to the `repository.query` #conduit query.
Test Plan: Changed repository encoding from the UI and saw the encoding returned by the Conduit call.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D12992
Summary: Fixes T8283. The code in `FileController` assumes this value is an array.
Test Plan: Loaded any file in Diffusion in unconfigured repository, no more warning.
Reviewers: avivey, joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8283
Differential Revision: https://secure.phabricator.com/D12964
Summary:
Fixes T7977.
- Move Indexed Languages and See Symbols From config to Repository
- Make symbol search skip projects
This also makes the default languages to Everything instead of Nothing.
Test Plan:
- Browse files, click symbols.
- Use quick search to find symbols
- Browse revision, click symbols
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7977
Differential Revision: https://secure.phabricator.com/D12687
Summary: Fixes T8215. When adding a revert edge, only consider commits within the same repository.
Test Plan: Imported the arcanist repository three times and inspected the reverts relationships on rARC490984936bb7ddfc589ef3d376ec2ac2365f070d.
Reviewers: hach-que, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T8215
Differential Revision: https://secure.phabricator.com/D12875
Test Plan: If a repository's tracking flag is toggled while it's in queue, we may loop indefinitely.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11296
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary: Fixes T8105. We weren't including the parent WHERE clause fragment correctly.
Test Plan: Used `not(project)` in a query.
Reviewers: btrahan, avivey
Reviewed By: avivey
Subscribers: avivey, epriestley
Maniphest Tasks: T8105
Differential Revision: https://secure.phabricator.com/D12746
Summary: Fixes T7220. Ref T7977. Changes symbols from being bound to an Arcanist project to being bound to a repository.
Test Plan:
- Added symbols and then applied migrations, symbols seemed to be migrated successfully.
- Tested the `/diffusion/symbol/$SYMBOL_NAME` endpoint.
- Tested the `/diffusion/symbol/$SYMBOL_NAME` endpoint with the `?repositories=$REPOSITORY_PHID` parameter.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: avivey, Korvin, epriestley
Maniphest Tasks: T7977, T7220
Differential Revision: https://secure.phabricator.com/D12608
Summary:
Fixes T6958. Ref T7484.
- When we collide on a lock in `bin/repository update`, explain what that means.
- GlobalLock currently uses a "lock name" which is different from the lock's actual name. Don't do this. There's a small chance this fixes T7484, but I don't have high hopes.
Test Plan: Ran `bin/repository update X` in two windows really fast, got the new message in one of them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6958, T7484
Differential Revision: https://secure.phabricator.com/D12574
Summary: Seems reasonable? At least, it always matches however a user might think about documents (app or document). Unclear if "Diffusion" for example, are actually needed.
Test Plan: tested searching for "phriction", "wiki", "document", etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12577
Summary: Ref T6160. Ref T7100. Mercurial branch heads can be closed; track this state so we can be smarter about it.
Test Plan: Closed a branch, run `repository update`, saw it close in the cursor table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6160, T7100
Differential Revision: https://secure.phabricator.com/D12550
Summary: Ref T5896. See that task and inline for a description.
Test Plan:
- Ran `bin/repository refs HGTESTX --trace`, saw sensible commands and a reasonable result.
- Faked the heads, set chunk size to 2, got this correct output from the algorithm:
> (((((((((1 or 2) or (3 or 4)) or ((5 or 6) or (7 or 8))) or (((9 or 10) or (11 or 12)) or ((13 or 14) or (15 or 16)))) or ((((17 or 18) or (19 or 20)) or ((21 or 22) or (23 or 24))) or (((25 or 26) or (27 or 28)) or ((29 or 30) or (31 or 32))))) or (((((33 or 34) or (35 or 36)) or ((37 or 38) or (39 or 40))) or (((41 or 42) or (43 or 44)) or ((45 or 46) or (47 or 48)))) or ((((49 or 50) or (51 or 52)) or ((53 or 54) or (55 or 56))) or (((57 or 58) or (59 or 60)) or ((61 or 62) or (63 or 64)))))) or ((((((65 or 66) or (67 or 68)) or ((69 or 70) or (71 or 72))) or (((73 or 74) or (75 or 76)) or ((77 or 78) or (79 or 80)))) or ((((81 or 82) or (83 or 84)) or ((85 or 86) or (87 or 88))) or (((89 or 90) or (91 or 92)) or ((93 or 94) or (95 or 96))))) or (((((97 or 98) or (99 or 100)) or ((101 or 102) or (103 or 104))) or (((105 or 106) or (107 or 108)) or ((109 or 110) or (111 or 112)))) or ((((113 or 114) or (115 or 116)) or ((117 or 118) or (119 or 120))) or (((121 or 122) or (123 or 124)) or ((125 or 126) or (127 or 128))))))) or (((((((129 or 130) or (131 or 132)) or ((133 or 134) or (135 or 136))) or (((137 or 138) or (139 or 140)) or ((141 or 142) or (143 or 144)))) or ((((145 or 146) or (147 or 148)) or ((149 or 150) or (151 or 152))) or (((153 or 154) or (155 or 156)) or ((157 or 158) or (159 or 160))))) or (((((161 or 162) or (163 or 164)) or ((165 or 166) or (167 or 168))) or (((169 or 170) or (171 or 172)) or ((173 or 174) or (175 or 176)))) or ((((177 or 178) or (179 or 180)) or ((181 or 182) or (183 or 184))) or (((185 or 186) or (187 or 188)) or ((189 or 190) or (191 or 192)))))) or ((((((193 or 194) or (195 or 196)) or ((197 or 198) or (199 or 200))) or (((201 or 202) or (203 or 204)) or ((205 or 206) or (207 or 208)))) or ((((209 or 210) or (211 or 212)) or ((213 or 214) or (215 or 216))) or (((217 or 218) or (219 or 220)) or ((221 or 222) or (223 or 224))))) or (((((225 or 226) or (227 or 228)) or ((229 or 230) or (231 or 232))) or (((233 or 234) or (235 or 236)) or ((237 or 238) or (239 or 240)))) or ((((241 or 242) or (243 or 244)) or ((245 or 246) or (247 or 248))) or (((249 or 250) or (251 or 252)) or ((253 or 254) or (255 or 256)))))))) or ((((((((257 or 258) or (259 or 260)) or ((261 or 262) or (263 or 264))) or (((265 or 266) or (267 or 268)) or ((269 or 270) or (271 or 272)))) or ((((273 or 274) or (275 or 276)) or ((277 or 278) or (279 or 280))) or (((281 or 282) or (283 or 284)) or ((285 or 286) or (287 or 288))))) or (((((289 or 290) or (291 or 292)) or ((293 or 294) or (295 or 296))) or (((297 or 298) or (299 or 300)) or ((301 or 302) or (303 or 304)))) or ((((305 or 306) or (307 or 308)) or ((309 or 310) or (311 or 312))) or (((313 or 314) or (315 or 316)) or ((317 or 318) or (319 or 320)))))) or ((((((321 or 322) or (323 or 324)) or ((325 or 326) or (327 or 328))) or (((329 or 330) or (331 or 332)) or ((333 or 334) or (335 or 336)))) or ((((337 or 338) or (339 or 340)) or ((341 or 342) or (343 or 344))) or (((345 or 346) or (347 or 348)) or ((349 or 350) or (351 or 352))))) or (((((353 or 354) or (355 or 356)) or ((357 or 358) or (359 or 360))) or (((361 or 362) or (363 or 364)) or ((365 or 366) or (367 or 368)))) or ((((369 or 370) or (371 or 372)) or ((373 or 374) or (375 or 376))) or (((377 or 378) or (379 or 380)) or ((381 or 382) or (383 or 384))))))) or (((((((385 or 386) or (387 or 388)) or ((389 or 390) or (391 or 392))) or (((393 or 394) or (395 or 396)) or ((397 or 398) or (399 or 400)))) or ((((401 or 402) or (403 or 404)) or ((405 or 406) or (407 or 408))) or (((409 or 410) or (411 or 412)) or ((413 or 414) or (415 or 416))))) or (((((417 or 418) or (419 or 420)) or ((421 or 422) or (423 or 424))) or (((425 or 426) or (427 or 428)) or ((429 or 430) or (431 or 432)))) or ((((433 or 434) or (435 or 436)) or ((437 or 438) or (439 or 440))) or (((441 or 442) or (443 or 444)) or ((445 or 446) or (447 or 448)))))) or ((((((449 or 450) or (451 or 452)) or ((453 or 454) or (455 or 456))) or (((457 or 458) or (459 or 460)) or ((461 or 462) or (463 or 464)))) or ((((465 or 466) or (467 or 468)) or ((469 or 470) or (471 or 472))) or (((473 or 474) or (475 or 476)) or ((477 or 478) or (479 or 480))))) or (((((481 or 482) or (483 or 484)) or ((485 or 486) or (487 or 488))) or (((489 or 490) or (491 or 492)) or ((493 or 494) or (495 or 496)))) or ((((497 or 498) or (499 or 500)) or ((501 or 502) or (503 or 504))) or (((505 or 506) or (507 or 508)) or ((509 or 510) or (511 or 512)))))))))
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T5896
Differential Revision: https://secure.phabricator.com/D12549
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary: Ref T5750. Make browsing work and improve filtering.
Test Plan:
- Used browse UI.
- Used normal search UI.
{F373752}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5750
Differential Revision: https://secure.phabricator.com/D12434
Summary: Ref T5750. Update the Almanac service query to be browsable.
Test Plan:
- Browsed and reordered Diffusion.
- Browsed and reordered services in Almanac.
{F373735}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5750
Differential Revision: https://secure.phabricator.com/D12433
Summary:
Ref T7803. Ref T5873. Allows Query methods to expose orderings from the underlying Query class nearly-for-free.
Callers can specify a string to use a builtin ordering, or an array to use a low-level column ordering.
Test Plan: {F368236}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5873, T7803
Differential Revision: https://secure.phabricator.com/D12381
