Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary:
Ref T13105. This breaks about 9,000 features but moves Diffusion to DocumentEngine for rendering. See T13105 for a more complete list of all the broken stuff.
But you can't bake a software without breaking all the features every time you make a change, right?
Test Plan: Viewed various files in Diffusion, used DocumentEngine features like highlighting and rendering engine selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Subscribers: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19302
Summary:
Depends on D19280. Ref T13110. Although Harbormaster cares about all builds, Differential does not practically care about local lint and unit results in determining build status.
In Differential, orient publishing around "remote builds" instead of "builds".
This does not yet change any of the draft logic, it just makes the timeline story use newer logic.
Test Plan: Used `bin/harbormaster publish` (with some guard-clause removal) to publish some buildables to revisions without anything crashing.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19281
Summary:
Ref T13110. Currently, build status is published the same way for every Buildable by the BuildEngine.
I want to change this to delegate publishing to each Buildable, particularly so that Differential may use more detailed rules for handling builds and drafts.
Rather than add additional methods to the existing `BuildableInterface`, add an engine generator method instead. This is a pattern which has seen more use recently (e.g., in Ferret) and lets us pay a little more upfront to pull complex pieces of logic out of the main class and let them use inheritence more easily. If we had Traits that might cover this to some degree.
I'd expect to eventually reduce the size of `BuildableInterface` and move the `CircleCI` and `BuildKite` interfaces so that the `BuildableEngine` implements them instead of the main object.
Here, this new engine does nothing and is never instantiated. In upcoming changes, publishing logic will move into it so that Differential can handle publishing differently.
Test Plan: Ran `arc liberate`, loaded pages, grepped for `BuildableInterface`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19278
Summary:
Ref T13114. See PHI514. This makes some attempt to undo the damage caused by incorrectly publishing a repository.
Don't run this.
Test Plan: Yikes.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19271
Summary:
Depends on D19249. Ref T13109. Add timing information to the `PushEvent`:
- `writeWait`: Time spent waiting for a write lock.
- `readWait`: Time spent waiting for a read lock.
- `hostWait`: Roughly, total time spent on the leaf node.
The primary goal here is to see if `readWait` is meaningful in the wild. If it is, that motivates smarter routing, and the value of smarter routing can be demonstrated by looking for a reduction in read wait times.
Test Plan: Pushed some stuff, saw reasonable timing values in the table. Saw timing information in "Export Data".
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19250
Summary:
Depends on D19247. Ref T13109. When we receive an SSH request, generate a random unique ID for the request. Then thread it down through the process tree.
The immediate goal is to let the `ssh-exec` process coordinate with `commit-hook` process and log information about read and write lock wait times. Today, there's no way for `ssh-exec` to interact with the `PushEvent`, but this is the most helpful place to store this data for users.
Test Plan: Made pushes, saw the `PushEvent` table populate with a random request ID. Exported data and saw the ID preserved in the export.
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19249
Summary:
Ref T13109. Make it slightly more clear what the scope of the write and read locks are, and slightly more clear that we're actively acquiring locks, not just sitting around waiting.
While waiting on another writer, show who we're waiting on so you can walk over to their desk and glare at them.
Test Plan:
Added `sleep(15)` after `willWrite()`. Pushed in two windows. Saw new, more informative messages. In the second window, saw the new guidance:
> # Waiting for hector to finish writing (on device "repo1.local.phacility.net" for 11s)...
Reviewers: asherkin
Reviewed By: asherkin
Subscribers: asherkin
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19247
Summary: See PHI432. Ref T13099. Short names never made it to the UI/API but seem stable now, so support them.
Test Plan: {F5465173}
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19202
Summary:
Ref T13096. Currently, we do a fair amount of clever digesting and string manipulation to build lock names which are less than 64 characters long while still being reasonably readable.
Instead, do more of this automatically. This will let lock acquisition become simpler and make it more possible to build a useful lock log.
Test Plan: Ran `bin/repository update`, saw a reasonable lock acquire and release.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19173
Summary: Depends on D19028. Ref T13053. Fixes T6576. An HTML body was built here, but not passed to the actual mail message.
Test Plan: Will verify production push mail.
Maniphest Tasks: T13053, T6576
Differential Revision: https://secure.phabricator.com/D19029
Summary:
Depends on D19019. Ref T13053. Fixes T12689. See PHI178.
Currently, if `@alice` resigns from a revision but `#alice-fan-club` is still a subscriber or reviewer, she'll continue to get mail. This is undesirable.
When users are associated with an object but have explicitly disengaged in an individal role (currently, only resign in audit/differential) mark them "unexpandable", so that they can no longer be included through implicit membership in a group (a project or package).
`@alice` can still get mail if she's a explicit recipient: as an author, owner, or if she adds herself back as a subscriber.
Test Plan:
- Added `@ducker` and `#users-named-ducker` as reviewers. Ducker got mail.
- Resigned as ducker, stopped getting future mail.
- Subscribed explicitly, got mail again.
- (Plus some `var_dump()` sanity checking in the internals.)
Reviewers: amckinley
Maniphest Tasks: T13053, T12689
Differential Revision: https://secure.phabricator.com/D19021
Summary:
Depends on D19009. Ref T13053. For "Must Encrypt" mail, we must currently strip the "Thread-Topic" header because it sometimes contains sensitive information about the object.
I don't actually know if this header is useful or anyting uses it. My understanding is that it's an Outlook/Exchange thing, but we also implement "Thread-Index" which I think is what Outlook/Exchange actually look at. This header may have done something before we implemented "Thread-Index", or maybe never done anything. Or maybe older versions of Excel/Outlook did something with it and newer versions don't, or do less. So it's possible that an even better fix here would be to simply remove this, but I wasn't able to convince myself of that after Googling for 10 minutes and I don't think it's worth hours of installing Exchange/Outlook to figure out. Instead, I'm just trying to simplify our handling of this header for now, and maybe some day we'll learn more about Exchange/Outlook and can remove it.
In a number of cases we already use the object monogram or PHID as a "Thread-Topic" without users ever complaining, so I think that if this header is useful it probably isn't shown to users, or isn't shown very often (e.g., only in a specific "conversation" sub-view?). Just use the object PHID (which should be unique and stable) as a thread-topic, everywhere, automatically.
Then allow this header through for "Must Encrypt" mail.
Test Plan: Processed some local mail, saw object PHIDs for "Thread-Topic" headers.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19012
Summary:
Ref T13053. Adds revision stamps (status, reviewers, etc). Adds Herald rule stamps, like the existing X-Herald-Rules header.
Removes the "self" stamps, since you can just write a rule against `whatever(@epriestley)` equivalently. If there's routing logic around this, it can live in the routing layer. This avoids tons of self-actor, self-mention, self-reviewer, self-blocking-reviewer, self-resigned-reviewer, etc., stamps.
Use `natcasesort()` instead of `sort()` so that numeric values (like monograms) sort `9, 80, 700` instead of `700, 80, 9`.
Remove the commas from rendering since they don't really add anything.
Test Plan: Edited tasks and revisions, looked at mail stamps, saw stamps that looked pretty reasonable (with no more self stuff, no more commas, sorting numbers, and Herald stamps).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18997
Summary:
Ref T13057. This makes "reverts" syntax more visible and useful. In particular, you can now `Reverts Dxx` in a revision or commit, and `Reverts <hash>` from a revision.
When you do, the corresponding object will get a more-visible cross-reference marker in its timeline:
{F5405517}
From here, we can look at surfacing revert information more heavily, since we can now query it on revision/commit pages via edges.
Test Plan: Used "reverts <hash>" and "reverts <revision>" in Differential and Diffusion, got sensible results in the timeline.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13057
Differential Revision: https://secure.phabricator.com/D18978
Summary: Ref T13049. This is just a general nice-to-have so you don't have to export a 300MB file if you want to check the last month of data or whatever.
Test Plan: Applied filters to all three logs, got appropriate date-range result sets.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18970
Summary:
Fixes T5965.
Fixes two issues:
- Observing an empty repository could write a warning to the log.
- Mirroring an empty repository to a remote could fail.
For observing:
If newly-created with `git init --bare`, `git ls-remote` will
return the empty string. Properly return an empty set of refs, rather
than attempting to parse the single "line" that is produced by
splitting that on newlines:
```
[2018-01-23 18:47:00] ERROR 8: Undefined offset: 1 at [/phab_path/phabricator/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:405]
arcanist(head=master, ref.master=5634f8410176), phabricator(head=master, ref.master=12551a1055ce), phutil(head=master, ref.master=4755785517cf)
#0 PhabricatorRepositoryPullEngine::loadGitRemoteRefs(PhabricatorRepository) called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:343]
#1 PhabricatorRepositoryPullEngine::executeGitUpdate() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:126]
#2 PhabricatorRepositoryPullEngine::pullRepositoryWithLock() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:40]
#3 PhabricatorRepositoryPullEngine::pullRepository() called at [<phabricator>/src/applications/repository/management/PhabricatorRepositoryManagementUpdateWorkflow.php:59]
...
```
For mirroring:
`git` treats `git push --mirror` specially when a repository is empty. Detect this case by seeing if `git for-each-ref --count 1` does anything. If the repository is empty, just bail.
Test Plan:
- Observed an empty and non-empty repository.
- Mirrored an empty and non-empty repository.
Reviewers: alexmv, amckinley
Reviewed By: alexmv
Subscribers: Korvin, epriestley
Maniphest Tasks: T5965
Differential Revision: https://secure.phabricator.com/D18920
Summary: Depends on D18917. Ref T13046. While I'm in here, update this to use more modern construction.
Test Plan: Browed and queried for push logs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18918
Summary:
Depends on D18915. Ref T13046.
- Distinguish between HTTP and HTTPS.
- Use more constants and fewer magical strings.
- For HTTP responses, give them better type information and more helpful UI behaviors.
Test Plan: Pulled over SSH and HTTP. Reviewed resulting logs from the web UI. Hit errors like missing/invalid credentials.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18917
Summary: Depends on D18914. Updates this Query to use slightly more modern construction while I'm working in adjacent code.
Test Plan: Viewed push logs in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18915
Summary:
Depends on D18912. Ref T13046. Add a UI to browse the existing pull log table.
The actual log still has some significant flaws, but get the basics working.
Test Plan: {F5391909}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18914
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Fixes T13031. "Enormous" changes are basically changes which are too large to hold in memory, although the actual definition we use today is "more than 1GB of change text or `git diff` runs for more than 15 minutes".
If an install configures a Herald content rule like "when content matches /XYZ/, do something" and then a user pushes a 30 GB source file, we can't put it into memory to `preg_match()` it. Currently, the way to handle this case is to write a separate Herald rule that rejects enormous changes. However, this isn't obvious and means the default behavior is unsafe.
Make the default behavior safe by rejecting these changes with a message, similar to how we reject "dangerous" changes (which permanently delete or overwrite history) by default.
Also, change a couple of UI strings from "Enormous" to "Very Large" to reduce ambiguity. See <https://discourse.phabricator-community.org/t/herald-enormous-check/822>.
Test Plan: Changed the definition of "enormous" from 1GB to 1 byte. Pushed a change; got rejected. Allowed enormous changes, pushed, got rejected by a Herald rule. Disabled the Herald rule, pushed, got a clean push. Prevented enormous changes again. Grepped for "enormous" elsewhere in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13031
Differential Revision: https://secure.phabricator.com/D18850
Summary: See PHI131. Ref T7789. Although this probably isn't 100% complete, there don't seem to be any actual, known, practical blocking issues remaining (everything is either heresay or not reproducible).
Test Plan: Tried to push LFS locally, got blocked with a helpful message. Enabled setting, tried to push LFS locally, got a successful push.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18825
Summary:
Fixes paging on the Diffusion Repository List.
PhabricatorRepositoryQuery needs to specify a behavior for `null` on the OderableColumns definition for the `callsign` column.
See https://phabricator.wikimedia.org/T180457
Test Plan:
1. On an instance with more than 100 repositories
* some of which are missing a callsign
2. Attempt to sort by callsign.
3. See the sorted results
Previously:
3. Exception: "Column "0" has null value, but does not specify a null behavior."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18773
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref PHI109. Ref T11786. We currently test elapsed time every 64 iterations (since iterations are normally very fast), but at least one install is seeing the page timeout after 30 seconds.
One reason could be that cache fills may occur, and are likely to be much slower than normal iterations. In an extreme case, we could do 64 cache fills before checking the time. Tweak thing so that we always check the time after doing a cache fill, regardless of how many iterations have elapsed since the last attempt.
Additionally, this API method currently accepts an arbitrary number of paths, but implicitly limits each cache query to 500ms. If more than 60 paths are passed, this may exceed 30s. Only let the cache churn for a maximum of 10s across all paths.
If this is more the latter issue than the former, this might replace the GraphCache timeouts with `git` timeouts, but at least our understanding of what's going on here will improve.
Test Plan: This is difficult to test convincingly locally, since I can't reproduce the original issue. It still works after these changes, but it worked fine before these changes too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11786
Differential Revision: https://secure.phabricator.com/D18692
Summary:
Ref T11823. I think this is the last callsite which relies on the old data format: `bin/repository parents` rebuilds a cache which we don't currently use very heavily.
Update it to work with the new data.
Test Plan: Ran `bin/repository parents <repository> --trace`, saw successful script execution and reasonable-looking output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18615
Summary:
Ref T11823. This is the meaty part of the change, and updates `RefEngine` to use separate RefCursor (for names) and RefPosition (for actual commit positions) tables.
I'll hold this whole series until after the release cut so it has some time to bake on `secure` to look for issues. It's also not a huge problem if there are bugs here since these tables are just caches anyway, although they do feed into some other things, and obviously it's never good to have bugs.
Test Plan:
- This logic can be invoked directly with `bin/repository refs <repository> --trace --verbose`.
- Ran that on unchanged repositories, new branches, removed branches, and modified branches. Saw appropriate output and cursor positions.
- Ran on a mercurial repository to test the close/open logic, saw it correct open/closed state of incorrect positions.
- Browed around Diffusion in various repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18614
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
Ref T12819. Obsoleted by the Ferret engine "Query" field.
This is a compatibility break, I'll note it in the changelog.
Test Plan: Searched for repositories by name with "Query" instead of "Name Contains".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18588
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary:
Ref T2543. These are the last `ArcanistDifferentialRevisionStatus` callsites.
This removes the very old legacy `precommitRevisionStatus` field, which has no other readers. This was obsoleted by the `CLOSED_FROM_ACCEPTED` stuff, but retained for compatibility.
Test Plan:
- Poked these with the test console, although they're a little tricky to be sure about.
- Grepped for `ArcanistDifferentialRevisionStatus`, no more hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18416
Summary:
Ref T2543. This cleans up a couple of remaining rough edges:
- We could do an older TYPE_ACTION "close" via the daemons.
- We could do an older TYPE_ACTION "close" via `arc close-revision`, explicitly or implicitly in `arc land`, via API (`differential.close`).
- We could do an older TYPE_ACTION "rethink" ("Plan Changes") via the API, via `arc diff --plan-changes` (`differential.createcomment`).
Move these to modern modular transactions, then get rid of all the validation and application logic for them. This nukes a bunch of `ArcanistDifferentialRevision::...` junk.
Test Plan:
- Used `bin/repository reparse --message rXYZ...` to reparse a commit, closing a corresponding revision.
- Used `differential.close` to close a revision.
- Used `differential.createcomment` to plan changes to a revision.
- Reviewed transaction log for full "closed by commit" message (linking to commit and mentioning author).
- Grepped for `::TYPE_ACTION` to look for remaining callsites, didn't find any.
- Grepped for `differential.close` and `differential.createcomment` in `arcanist/` to look for anything suspicious, seemed clean.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18412
Summary:
Ref T12961. Fixes T4416. Currently, for observed Mercurial repositories, we build a working copy with `pull -u` (for "update").
This should be unnecessary, and we don't do it for hosted Mercurial repositories. We also stopped doing it years ago for Git repositories. We also don't clone Mercurial repositories with a working copy.
It's possible something has slipped through the cracks here so I'll hold this until after the release cut, but I believe there are no actual technical blockers here.
Test Plan:
- Observed a public Mercurial repository on Bitbucket.
- Let it import.
- Browsed commits, branches, file content, etc., without any apparent issues.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961, T4416
Differential Revision: https://secure.phabricator.com/D18390
Summary:
Ref T2543. Add `isPublished()` to mean: exactly the status 'closed', which is now interally called 'published', but still shown as 'closed' to users.
We have some callsites which are about "exactly that status", vs "any 'closed' status", e.g. including "abandoned".
This also introduces `isChangePlanned()`, which felt less awkward than `isChangesPlanned()` but more consistent than `hasChangesPlanned()` or `isStatusChangesPlanned()` or similar.
Test Plan: `grep`, loaded revisions, requested review.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18341
Summary:
Fixes T12946. `bin/remove destroy` does not remove working copies: it's more dangerous than usual, and we can't do it in the general (clustered) case.
Print a notification message after destroying a repository.
Test Plan:
- Destroyed a repository, got a hint about the working copy.
- Destroyed a task, things worked normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12946
Differential Revision: https://secure.phabricator.com/D18313
Summary:
Fixes T12942.
- Adds binary version and path information to {nav Config > Version Information}.
- Replaces old code all over the place with new consolidated code.
Test Plan:
{F5073531}
Also faked some cases of missing binaries, bad versions, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12942
Differential Revision: https://secure.phabricator.com/D18306
Summary: Fixes T12945.
Test Plan:
Mostly faked this, got a censored error:
```
$ ./bin/repository update R38
[2017-07-31 19:40:13] EXCEPTION: (Exception) Working copy at "/Users/epriestley/dev/core/repo/local/38/" has a mismatched origin URI, "https://********@example.com/". The expected origin URI is "https://github.com/phacility/libphutil.git". Fix your configuration, or set the remote URI correctly. To avoid breaking anything, Phabricator will not automatically fix this. at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryEngine.php:186]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12945
Differential Revision: https://secure.phabricator.com/D18304
Summary: This moves the clone details on the Repository Home to a button / dialog. Functionally this is to pull content on the page way up, while giving full space to all the clone options. I think we can build this into some FancyJS if needed, but this seems to clean ui the UI dramatically with little overhead. I don't want to attempt the JS dropdown unless we're sure that's the best path (it exposes the most common URI by default, saving a click).
Test Plan: Tested hg, svn, git repositories and the raw URL page. Test close button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18203
Summary: Fixes T12840. This adds a parallel "graph" button next to history on home and on the history list page. I'll think more about better placement of how to get to this page with the upcoming redesign that's still sitting in Pholio.
Test Plan: View History, View Graph, Try pager, go to a file, click view history, see no graph button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12840
Differential Revision: https://secure.phabricator.com/D18131
Summary: Builds out some images to use to identify repositories. Fixes T12825.
Test Plan:
Try setting custom, built in, and null images.
{F4998175}
{F4998192}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12825
Differential Revision: https://secure.phabricator.com/D18116
Summary:
Ref T12613. Currently, the SVNTEST and HGTEST repositories are improperly configured on `secure`. These repositories use VCS systems which do not support synchronization, so they can not be served from cluster services with multiple hosts.
However, I've incorrectly configured them the same way as all the Git repositories, which support synchronization. This causes about 50% of requests to randomly fail (when they reach the wrong host).
Detect this issue and warn the user that the configuration is not valid.
It should be exceptionally difficult for normal installs to run into this.
Test Plan:
- Mostly faked these conditions locally, verified that `secure` really has this configuration.
- I'll push this, verify that the issue is detected correctly in production, then fix the config which should resolve the intermittent issues with SVNTEST.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12613
Differential Revision: https://secure.phabricator.com/D17774
