Summary:
Ref T4986. This adds a bit of structure for handles, since we used to have Controller utilities but no longer do.
Hopefully these will start going faster soon...
Test Plan:
- Checked feed for collateral damage.
- Checked slowvote for collateral damage.
- Made a slowvote panel.
{F151550}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9010
Summary:
Ref T4986. We need to introduce alternate views to make this more pleasant, but let rendering move to engines so it can be shared between panels and controllers.
I also moved some of the pagination logic in to avoid duplicating that.
So far, only Feed works. I'm going to do these gradually since we have ~40-50 of them.
Test Plan:
- Used global search to check for collateral damage.
- Used not-global search too.
- Used normal feed.
{F151541}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9008
Summary: Ref T4986. This isn't pretty/usable yet (I need to move rendering out of ListController classes and into SearchEngine classes, I think) but does pull the correct results.
Test Plan: {F151537}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9007
Summary:
This plugin provides an OAuth authentication provider to authenticate users using WordPress.com Connect.
This diff corresponds to github pull request https://github.com/facebook/phabricator/pull/593/ and had its libphutil counterpart reviewed in D9004.
Test Plan: Configured WordPress.com as an authentication provider, saw it show up on the login screen, registered a new account, got expected defaults for my username/name/email/profile picture.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9019
Summary:
Ref T4119. This is ugly for now, but technically works.
The comment area and transaction log don't realy know about each other, so for the moment the linking is a bit manual. Differential/Maniphest are special cases anyway.
Test Plan: {F149992}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4119
Differential Revision: https://secure.phabricator.com/D8957
Summary:
Fixes T4909. Adds a "remove" link next to the edit link, which permanently hides a comment. Addresses two use cases:
- Allowing administrators to clean up spam.
- Allowing users to try to put the genie back in the bottle if they post passwords or sensitive links, etc.
The user who removed the comment is named in the removal text to enforce some level of administrative accountability.
No data is deleted, but there's currently no method to restore these comments. We'll see if we need one.
This is cheating a little bit by storing "removed" as "2" in the isDeleted field. This doesn't seem tooooo bad for now.
Test Plan:
- Removed some of my comments.
- As an administrator, removed other users' comments.
- Failed to view history of a removed comment.
- Failed to edit a removed comment.
- Failed to remove a removed comment.
- Verified feed doesn't show the old comment after comment removal.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: qgil, chad, epriestley
Maniphest Tasks: T4909
Differential Revision: https://secure.phabricator.com/D8945
Summary: Ref T4843. Chips away at a few more things.
Test Plan: Used VoiceOver and got a generally more sensible-seeming result.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4843
Differential Revision: https://secure.phabricator.com/D8978
Summary: Fixes T4931. Each new credential should come with the ability to lock the credential permanently, so that no one can ever edit again. Each existing credential must allow user to lock existing credential.
Test Plan: Create new credential, verify that you can lock it before saving it. Open existing unlocked credential, verify that option to lock it exists. Once credential is locked, the option to reveal it should be disabled, and editing the credential won't allow username/password updates.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4931
Differential Revision: https://secure.phabricator.com/D8947
Summary:
Ref T4749. Ref T3265. Ref T4909. Several goals here:
- Move user destruction to the CLI to limit the power of rogue admins.
- Start consolidating all "destroy named object" scripts into a single UI, to make it easier to know how to destroy things.
- Structure object destruction so we can do a better and more automatic job of cleaning up transactions, edges, search indexes, etc.
- Log when we destroy objects so there's a record if data goes missing.
Test Plan: Used `bin/remove destroy` to destroy several users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3265, T4749, T4909
Differential Revision: https://secure.phabricator.com/D8940
Summary: Ref T4938. `arc close` needs to know about custom statuses and this conduit method is step 1 of letting it know
Test Plan: See next diff, which works!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4938
Differential Revision: https://secure.phabricator.com/D8937
Summary:
Ref T4398. This prompts users for multi-factor auth on login.
Roughly, this introduces the idea of "partial" sessions, which we haven't finished constructing yet. In practice, this means the session has made it through primary auth but not through multi-factor auth. Add a workflow for bringing a partial session up to a full one.
Test Plan:
- Used Conduit.
- Logged in as multi-factor user.
- Logged in as no-factor user.
- Tried to do non-login-things with a partial session.
- Reviewed account activity logs.
{F149295}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8922
Summary: Ref T4398. Prevent users from brute forcing multi-factor auth by rate limiting attempts. This slightly refines the rate limiting to allow callers to check for a rate limit without adding points, and gives users credit for successfully completing an auth workflow.
Test Plan: Tried to enter hisec with bad credentials 11 times in a row, got rate limited.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8911
Summary:
Ref T4398. The major goals here is to let administrators strip auth factors in two cases:
- A user lost their phone and needs access restored to their account; or
- an install previously used an API-based factor like SMS, but want to stop supporting it (this isn't possible today).
Test Plan:
- Used `bin/auth list-factors` to show installed factors.
- Used `bin/auth strip` with various mixtures of flags to selectively choose and strip factors from accounts.
- Also ran `bin/auth refresh` to verify refreshing OAuth tokens works (small `OAuth` vs `OAuth2` tweak).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8909
Summary: Ref T3583. Use the same approach Harbormaster does to give panels cheap forms.
Test Plan:
{F149218}
{F149219}
{F149220}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8919
Summary:
Ref T3583. Adds edges, query relationships, etc. Lots of debugging/temporary UI.
My general intent here is to use edges to track where panels appear, and then put additional data on the dashboard itself to control layout, positioning, etc.
Dashboards don't actually render yet so this is still pretty boring.
Test Plan:
{F149175}
{F149176}
{F149177}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8916
Summary: Ref T3583. These will be the primary class carrying panel implementations.
Test Plan:
{F149125}
{F149126}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8912
Summary: 'cuz those can be complicated. Fixes T4738. I needed to do a fair amount of heavy lifting to get the policy stuff rendering correctly. For now, I made this end point very one purpose and tried to make that clear.
Test Plan: looked at some custom policies. see screenshots.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4738
Differential Revision: https://secure.phabricator.com/D8890
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. Ref T4842. I want to let users review their own account activity, partly as a general security measure and partly to make some of the multi-factor stuff easier to build and debug.
To support this, implement modern policies and application search.
I also removed the "old" and "new" columns from this output, since they had limited utility and revealed email addresses to administrators for some actions. We don't let administrators access email addresses from other UIs, and the value of doing so here seems very small.
Test Plan: Used interface to issue a bunch of queries against user logs, got reasonable/expected results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: keir, epriestley
Maniphest Tasks: T4842, T4398
Differential Revision: https://secure.phabricator.com/D8856
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: ...also kills off "PhabricatorAuditCommitQuery" and "PhabricatorAuditQuery", by moving the work to "DiffusionCommitQuery". Generally cleans up some code around the joint on this too. Also provides policies for audit requests, which is basically the policy for the underlying commit. Fixes T4715. (For the TODO I added about files, I just grabbed T4713.)
Test Plan:
Audit: verified the three default views all showed the correct things, including highligthing. did some custom queries and got the correct results.
Diffusion: verified "blame view" still worked. verified paths were highlighted for packages i owned.
Home: verified audit boxes showed up with proper commits w/ audits
bin/audit: played around with it via --dry-run and got the right audits back
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8805
Summary: Fixes T3566 List of poll actions should include ability to close an open poll or reopen a closed poll.
Test Plan: Poll author should be able to close/reopen poll. Non-author should get policy screen when attempting to close/reopen poll.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T3566
Differential Revision: https://secure.phabricator.com/D8846
Summary:
Ref T4830. A few methods, like `conduit.ping`, are callable without authentication, so this even has some use cases. Also:
- Make some Differential stuff a little more consistent.
- Use slightly more modern rendering.
- Deprecate the status-oriented `user` calls; these will be replaced by Calendar methods.
Test Plan: Browsed console as logged out / logged in users.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4830
Differential Revision: https://secure.phabricator.com/D8826
Summary:
Ref T3662. Releeph blocks users from requsting unparsed commits, but there's no real technical reason for this.
The `releephwork.getorigcommitmessage` method assumes data exists, but should be replaced with `diffusion.querycommits` anyway.
Test Plan: Ran `diffusion.querycommits`. Requested a commit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3662
Differential Revision: https://secure.phabricator.com/D8823
Summary:
Ref T3662. Ref T3549. These methods are pretty conservative for now, but get the structure in place.
Also do a bunch more project -> product stuff.
Test Plan: Made calls to both methods, browsed around the UI a fair amount.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3549, T3662
Differential Revision: https://secure.phabricator.com/D8816
Summary:
Ref T3718. Ref T3644. Ref T3092. Switches from the Releeph UI elements to standard ones. I'll attach some screenshots.
Also fixes CSRF against the request action endpoint.
Test Plan:
- Viewed request details.
- Took actions on a request from detail page.
- Viewed request list.
- Took actions on a request from list page.
- Used keyboard shortcuts to navigate list.
- Used keyboard shortcuts to take actions.
- Simulated errors.
- Viewed on devices.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: grp, FacebookPOC, mattlqx, tala, beng, LegNeato, epriestley
Maniphest Tasks: T3718, T3092, T3644
Differential Revision: https://secure.phabricator.com/D8771
Summary:
Ref T4810. Ultimate goal is to let Harbormaster post a "build passed/failed" transaction. To prepare for that, implement `PhabricatorApplicationTransactionInterface` in Differential.
To allow Harbormaster to take action on //diffs// but have the transactions apply to //revisions//, I added a new method so that objects can redirect transactions to some other object.
Test Plan:
- Subscribed/unsubscribed/attached/detached from Differential, saw transactions appear properly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4810
Differential Revision: https://secure.phabricator.com/D8802
Summary:
Ref T4809. Currently, buildables have a status field but nothing populates it. Populate it:
- When builds change state, update the Buildable state.
- Use the new Buildable state on the web UI.
- Return the new Buildable state from Conduit.
To make it easier to debug/test this:
- Provide `bin/harbormaster update Bxxx ...` to force foreground update of a Buildable.
Test Plan:
- Used `bin/harbormaster update Bxxx --force --trace` to update buildables.
- Looked at buidlable list, saw statuses reported properly.
- Used Conduit to read statuses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8799
Summary:
Ref T4809. This one is more straightforward. A couple of tweaks:
- Remove the WAITING status, since nothing ever sets it and I suspect nothing ever will with the modern way artifacts work (maybe). At a minimum, it's confusing with the new Target status that's also called "WAITING" but means something different.
- Consolidate 17 copies of these status names into one method.
Test Plan: Ran some queries via Conduit, got reasonable looking results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8795
Summary: Ref T4809. I need to sort out some of the "status" stuff we're doing before this is actually useful (there's no sensible "status" value to expose right now) but once that happens `arc` can query this to figure out whether it needs to warn the user about pending/failed builds.
Test Plan: Ran query with various different parameters.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8794
Summary:
For Harbormaster tasks which want to poll or wait, this lets them say "try again a little later" without having to sleep and hold a queue slot.
This is basically the same as failing, except that we don't increment the failure counter. Instead, we just set the current lease to the correct length and then exit. The task will be retried after the lease expires.
Test Plan: Using both `bin/harbormaster` and `phd debug taskmaster`, ran a lot of waiting tasks through the queue, faking them to either yield or not yield in a controlled manner. The queue responded as expected, yielding tasks appropraitely and retrying them later.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8792
Summary:
Ref T4605. Currently, the PullLocal daemon is responsible for two relatively distinct things:
- scheduling repository updates; and
- actually updating repositories.
Move the "actually updating" part into a new `bin/repository update` command, which basically runs the pull, discover, refs and mirror commands. This will let the parent process focus on scheduling in a more understandable way and update multiple repositories at once. It also makes it easier to debug and understand update behavior since the non-scheduling pipeline can be run separately.
Test Plan:
- Ran `update --trace` on SVN, Mercurial and Git repos.
- Ran PullLocal daemon for a while without issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4605
Differential Revision: https://secure.phabricator.com/D8780
Summary:
Ref T3657. General changes here:
- Removes `ReleephProjectController`, which is the source of T3657.
- Mostly moves requests from "RQ" as a monogram to "Y" (looks like a merge, mnemonic for "yank"?, we don't have too many characters left). This should be essentially only cosmetic. This reduces ambiguity with "rQ" and "R123", which are current and future repository monograms. This will continue in the next few diffs.
- Makes requests implement policies correctly.
Test Plan: Created, edited, browsed requests.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3657
Differential Revision: https://secure.phabricator.com/D8766
Summary:
Ref T4045. We have a lot of direct queries against the hunk table right now. These are messy, not really policy-aware, and limit our options on T4045.
This query is unusual (it requires changesets, and does not accept IDs). This keeps us from having to load changeset -> diff -> revision in order to do policy checks. We could also fix this with smarter policy checks and caching, but I'd rather not open that can of worms for now. This object is very low level and relatively unusual, and this small deviation from convention seems like the cleanest cut to make to keep this from snowballing.
Test Plan: Used Herald dry runs to verify that the affected rules still output the same data.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045
Differential Revision: https://secure.phabricator.com/D8765
Summary:
Ref T3644. Ref T3657. Ref T3549. Basically:
- Move these controllers to modern query/policy infrastructure.
- Move them to consistent, ID-based URIs.
- Rename "Project" to "Product"; "Pick Request" to "Pull Request".
- Clean up a few UI things here and there.
Test Plan:
- Created and edited branches.
- Opened and closed branches.
- Viewed branch history.
- Searched within a branch.
- Browsed to branches from products.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3644, T3549, T3657
Differential Revision: https://secure.phabricator.com/D8646
Summary:
Ref T4786. This doesn't fully fix the issue since there's no way to make channels public yet, but gets some of the infrastructure more up to date.
- Allow public access to the list and log controllers.
- Implement proper policy checks in the Events (this has no practical impact on the only controller that loads this stuff, it's just for general/future purposes).
- Remove a old-style unused method for building page frames.
Test Plan: Viewed log list and log details as logged-in and logged out users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4786
Differential Revision: https://secure.phabricator.com/D8746
Summary: Fixes T4755. This also includes putting in a note that Google might ToS you to use the Google+ API. Lots of code here as there was some repeated stuff between OAuth1 and OAuth2 so I made a base OAuth with less-base OAuth1 and OAuth2 inheriting from it. The JIRA provider remains an independent mess and didn't get the notes field thing.
Test Plan: looked at providers and read pretty instructions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4755
Differential Revision: https://secure.phabricator.com/D8726
Summary:
Ref T4371. Ref T4699. Fixes T3994.
Currently, we're very conservative about sending errors back to users. A concern I had about this was that mistakes could lead to email loops, massive amounts of email spam, etc. Because of this, I was pretty hesitant about replying to email with more email when I wrote this stuff.
However, this was a long time ago. We now have Message-ID deduplication, "X-Phabricator-Sent-This-Mail", generally better mail infrastructure, and rate limiting. Together, these mechanisms should reasonably prevent anything crazy (primarily, infinite email loops) from happening.
Thus:
- When we hit any processing error after receiving a mail, try to send the author a reply with details about what went wrong. These are limited to 6 per hour per address.
- Rewrite most of the errors to be more detailed and informative.
- Rewrite most of the errors in a user-facing voice ("You sent this mail..." instead of "This mail was sent..").
- Remove the redundant, less sophisticated code which does something similar in Differential.
Test Plan:
- Using `scripts/mail/mail_receiver.php`, artificially received a pile of mail.
- Hit a bunch of different errors.
- Saw reasonable error mail get sent to me.
- Saw other reasonable error mail get rate limited.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3994, T4371, T4699
Differential Revision: https://secure.phabricator.com/D8692
Summary:
This adds a system which basically keeps a record of recent actions, who took them, and how many "points" they were worth, like:
epriestley email.add 1 1233989813
epriestley email.add 1 1234298239
epriestley email.add 1 1238293981
We can use this to rate-limit actions by examining how many actions the user has taken in the past hour (i.e., their total score) and comparing that to an allowed limit.
One major thing I want to use this for is to limit the amount of error email we'll send to an email address. A big concern I have with sending more error email is that we'll end up in loops. We have some protections against this in headers already, but hard-limiting the system so it won't send more than a few errors to a particular address per hour should provide a reasonable secondary layer of protection.
This use case (where the "actor" needs to be an email address) is why the table uses strings + hashes instead of PHIDs. For external users, it might be appropriate to rate limit by cookies or IPs, too.
To prove it works, I rate limited adding email addresses. This is a very, very low-risk security thing where a user with an account can enumerate addresses (by checking if they get an error) and sort of spam/annoy people (by adding their address over and over again). Limiting them to 6 actions / hour should satisfy all real users while preventing these behaviors.
Test Plan:
This dialog is uggos but I'll fix that in a sec:
{F137406}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8683
Summary:
Fixes T4065. This divides user creation into separate "Standard User" and "Script/Bot" workflows which show only relevant fields and provide guidance.
This fixes the verification mess associated with script/bot users by verifying their email addresses automatically.
Test Plan:
- Created a standard user.
- Created a script/bot.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8674
Summary: Ref T4065. Moves the last of the weird alternate edit UI to profiles. The old "Edit" controller is now for creation only, and the funky pencil icon is gone.
Test Plan: Created accounts; sent welcome email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8670
Summary: Ref T4065. Moves the "disable / enable" and "make / unmake administrator" actions to profiles.
Test Plan: Disabled and enabled users, and made and unmade administrators.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8666
Summary: Ref T4065. Make this work in a more standard way which administrators have a reasonable shot at finding and using. See D8662 for discussion.
Test Plan: Changed a user's username.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8663
