Summary:
Ref T4340. The attack this prevents is:
- An adversary penetrates your network. They acquire one of two capabilities:
- Your server is either configured to accept both HTTP and HTTPS, and they acquire the capability to observe HTTP traffic.
- Or your server is configured to accept only HTTPS, and they acquire the capability to control DNS or routing. In this case, they start a proxy server to expose your secure service over HTTP.
- They send you a link to `http://secure.service.com` (note HTTP, not HTTPS!)
- You click it since everything looks fine and the domain is correct, not noticing that the "s" is missing.
- They read your traffic.
This is similar to attacks where `https://good.service.com` is proxied to `https://good.sorvace.com` (i.e., a similar looking domain), but can be more dangerous -- for example, the browser will send (non-SSL-only) cookies and the attacker can write cookies.
This header instructs browsers that they can never access the site over HTTP and must always use HTTPS, defusing this class of attack.
Test Plan:
- Configured HTTPS locally.
- Accessed site over HTTP (got application redirect) and HTTPS.
- Enabled HSTS.
- Accessed site over HTTPS (to set HSTS).
- Tore down HTTPS part of the server and tried to load the site over HTTP. Browser refused to load "http://" and automatically tried to load "https://". In another browser which had not received the "HSTS" header, loading over HTTP worked fine.
- Brought the HTTPS server back up, things worked fine.
- Turned off the HSTS config setting.
- Loaded a page (to set HSTS with expires 0, diabling it).
- Tore down the HTTPS part of the server again.
- Tried to load HTTP.
- Now it worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D11820
Summary:
Ref T7185. These settings shouldn't be unlocked anywhere. Specifically:
- `reply-handler`: These are on the way out.
- `reply-handler-domain`: Also hopefully on the way out; locked because a compromised administrator account can redirect replies.
- `phabricator.cookie-prefix`: Not dangerous per se, but an admin could have a hard time fixing this if they changed it by accident since their session would become invalid immediately.
Test Plan: Browsed Config.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11764
Summary:
Ref T7185. We currently have "locked", "masked", and "hidden" config.
However, "masked" does not really do anything. It was intended to mask values in DarkConsole, but Config got built out instead and "hidden" is strictly better in modern usage and protects against compromised administrator accounts. "hidden" implies "locked", so it's now strictly more powerful than just locked.
Remove "masked" and upgrade all "masked" config to "hidden". In particular, this hides some API keys and secret keys much more aggressively in Config, which is desirable.
Test Plan: Browsed things like S3 API keys in config and could no longer see them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11763
Summary: Fixes T7088. Mainly this updates the documentation but I also snuck in tweaking how the domain reply handler is built. This does two main things -- makes the behavior consistent as some applications who didn't override this behavior would send out emails with reply tos AND makes it easier for us to deprecate the custom domain thing on a per application basis, which is just silly. On that note, the main documentation doesn't get into how this can be overridden, though I left in that mini blurb on the config setting itself. We could deprecate this harder and LOCK things if you want as well.
Test Plan: read docs, looked good. reasoned through re-factor
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7088
Differential Revision: https://secure.phabricator.com/D11725
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary:
Fixes T2380. Fixes T2382. Users should really configure this, but when we had a warning before a lot of users had trouble with it.
- Tout performance benefits.
- Document easy setup via CDN.
- We have an "Ignore" button now for users who really don't care.
Test Plan:
- Set up `admin.phacility.com` through AWS CloudFront (need a few changes to handle instances to put it on the cluster in general).
- Set up `secure.phabricator.com` through CloudFlare (almost; waiting for DNS).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2382, T2380
Differential Revision: https://secure.phabricator.com/D11649
Summary: This sets an icon for each config, makes it easier to scan.
Test Plan:
Reload Config page, see all new icons
{F281089}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11619
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Fixes T6959.
Test Plan: When I was ready to test the feature, the "Daemon & Web config" error already showed up, from having added phd.variant-config. I went meta and changed the value of phd.variant-config to have phd.variant-config. The config error disappeared. I then changed the conpherence setting about conpherence email prefix and the error showed up again. Removing the conpherence config setting made the error disappear once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6959
Differential Revision: https://secure.phabricator.com/D11399
Summary:
Fixes T6559. No more flash, use Websockets. This is less aggressive than the earlier version, and retains more server logic.
- Support "wss".
- Make the client work.
- Remove "notification.user" entirely.
- Seems ok?
Test Plan:
In Safari, Firefox and Chrome, saw the browsers connect. Made a bunch of comments/updates and saw notifications.
Notable holes in the test plan:
- Haven't tested "wss" yet. I'll do this on secure.
- Notifications are //too fast// now, locally. I get them after I hit submit but before the page reloads.
- There are probably some other rough edges, this is a fairly big patch.
Reviewers: joshuaspence, btrahan
Reviewed By: joshuaspence, btrahan
Subscribers: fabe, btrahan, epriestley
Maniphest Tasks: T6713, T6559
Differential Revision: https://secure.phabricator.com/D11143
Summary:
Ref T2783. Ref T6706.
- Add `cluster.addresses`. This is a whitelist of CIDR blocks which define cluster hosts.
- When we recieve a request that has a cluster-based authentication token, require the cluster to be configured and require the remote address to be a cluster member before we accept it.
- This provides a general layer of security for these mechanisms.
- In particular, it means they do not work by default on unconfigured hosts.
- When cluster addresses are configured, and we receive a request //to// an address not on the list, reject it.
- This provides a general layer of security for getting the Ops side of cluster configuration correct.
- If cluster nodes have public IPs and are listening on them, we'll reject requests.
- Basically, this means that any requests which bypass the LB get rejected.
Test Plan:
- With addresses not configured, tried to make requests; rejected for using a cluster auth mechanism.
- With addresses configred wrong, tried to make requests; rejected for sending from (or to) an address outside of the cluster.
- With addresses configured correctly, made valid requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6706, T2783
Differential Revision: https://secure.phabricator.com/D11159
Summary:
Two goals:
- If an attacker compromises an administrator account (without compromising the host itself), they can currently take advantage of vulnerabilities in prototype applications by enabling the applications, then exploiting the vulnerability. Locking this option requires CLI access to enable prototypes, so installs which do not have prototypes enabled have no exposure to security issues in prototype applications.
- Making this very slightly harder to enable is probably a good thing, given the state of the world and support.
Test Plan: Verified that web UI shows the value is locked and instructs the user to update via the CLI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10993
Summary: Ref T1217, Add link to email preferences to email template
Test Plan: Add comment to object like Maniphest task, check that email has a footer with a link to email preferences.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T1217
Differential Revision: https://secure.phabricator.com/D10883
Summary: Fixes T6175. This particular option is only editable via the Applications application so let the user know that.
Test Plan: saw error message and clicked through to applications app. tried another locked option and saw old message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6175
Differential Revision: https://secure.phabricator.com/D10841
Summary: See rP8806fb0296c2.
Test Plan:
me fail english
with bonus!
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10514
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Fixes T6044. We've had two cases (both the same install, coincidentally) where pages got hung doing too much data fetching.
When pages hang, we don't get a useful stack trace out of them, since nginx, php-fpm, or PHP eventually terminates things in a non-useful way without any diagnostic information.
The second time (the recent Macros issue) I was able to walk the install through removing limits on nginx, php-fpm, php, and eventually getting a profile by letting the page run for several minutes until the request completed. However, this install is exceptionally technically proficient and this was still a big pain for everyone, and this approach would not have worked if the page actually looped rather than just taking a long time.
Provide `debug.time-limit`, which should give us a better tool for reacting to this situation: by setting it to a small value (like 10), we'll kill the page after 10 seconds with a trace, before nginx/php-fpm/php/etc can kill it uselessly. Hopefully that will be enough information to find the issue (generally, getting a trace has been 95% of the problem in the two cases we've encountered).
Test Plan: Set this option to `3` and added a sleep loop, saw a termination after 3 seconds with a useful trace.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: csilvers, joshuaspence, epriestley
Maniphest Tasks: T6044
Differential Revision: https://secure.phabricator.com/D10465
Summary: Fixes T6052. Allow installs to link to legal documents, etc., in the page footer.
Test Plan:
- Configured a footer.
- Viewed workboards (no footer).
- Viewed Conpherence (no apparent disruption, I think everything z-indexes over the footer).
- Viewed stuff on mobile (seems OK).
- Viewed login page (saw footer).
{F201718}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6052
Differential Revision: https://secure.phabricator.com/D10466
Summary:
Fixes T5956. We changed the default mail encoding to `quoted-printable` to fix delivery via SendGrid via SMTP, but this broke multiple other mailers.
- Change the default back to 8bit (which works everywhere except SendGrid).
- Add a configuration setting for selecting `quoted-printable`.
- Document this issue.
- Discourage use of SendGrid in documentation.
(IMPORTANT) @klimek @nickz This reverts the `quoted-printable` fix for SendGrid. You will need to adjust your configurations (set `phpmailer.smtp-encoding` to `quoted-printable`) and restart your daemons or mail will get double newlines again.
Test Plan:
- Sent mail via SendGrid with various `phpmailer.smtp-encoding` settings, saw mail arrive with specified encoding.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: klimek, nickz, epriestley
Maniphest Tasks: T5956
Differential Revision: https://secure.phabricator.com/D10397
Summary:
Added support for side-by-side HTML and plaintext email building.
We can control if the HTML stuff is sent by by a new config, metamta.html-emails
Test Plan:
Been running this in our deployment for a few months now.
====Well behaved clients====
- Gmail
- Mail.app
====Bad clients====
- [[ http://airmailapp.com/ | Airmail ]]. They confuse Gmail too, though.
====Need testing====
- Outlook (Windows + Mac)
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: webframp, taoqiping, chad, epriestley, Korvin
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D9375
Summary: Fixes T5453.
Test Plan: made a remarkup comment that "Q1 is dumb and Q10 is awesome" and only Q10 was linked. changed the new setting to have the value " " and the Q1 also started linking.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5453
Differential Revision: https://secure.phabricator.com/D10270
Summary: Introduce a new configuration setting that by default disables the conduit as as user method. Wordily explain that turning it on is not recommended. Fixes T3818.
Test Plan:
```
15:25:19 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":null,"errorMessage":null,"response":{"phid":"PHID-USER-tghb3b2gbdyezdcuw2or","userName":"btrahan","realName":"Bob Trahan","image":"http:\/\/phalanx.dev\/file\/data\/yncjbh7phk7ktrdhuorn\/PHID-FILE-qyf4ui3x2ll3e52hpg5e\/profile-profile-gravatar","uri":"http:\/\/phalanx.dev\/p\/btrahan\/","roles":["admin","verified","approved","activated"]}}
15:25:34 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
<go edit libconfig/conduitclient to spoof another user...>
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":"ERR-CONDUIT-CORE","errorMessage":"ERR-CONDUIT-CORE: security.allow-conduit-act-as-user is disabled","response":null}
15:26:40 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
<enable option via bin/config....>
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":null,"errorMessage":null,"response":{"phid":"PHID-USER-6lcglnzbkiamdofishgi","userName":"xerxes","realName":"Xerxes Trahan","image":"http:\/\/phalanx.dev\/file\/data\/n2kyeevowetcuynbcxrg\/PHID-FILE-voquikectzpde256zzvm\/profile-1275455993.jpg","uri":"http:\/\/phalanx.dev\/p\/xerxes\/","roles":["verified","approved","activated"]}}
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: jevripio, sowedance, epriestley, Korvin
Maniphest Tasks: T3818
Differential Revision: https://secure.phabricator.com/D9881
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary: I could just add these options to my local configuration, but I figured I'd submit these upstream since they are (in my opinion) fairly common file formats.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9319
Summary: After T2039, it makes sense to syntax highlight `.arclint` files as JSON.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9305
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary:
This is just a general review of config options, to reduce the amount of damage a rogue administrator (without host access) can do. In particular:
- Fix some typos.
- Lock down some options which would potentially let a rogue administrator do something sketchy.
- Most of the new locks relate to having them register a new service account, then redirect services to their account. This potentially allows them to read email.
- Lock down some general disk stuff, which could be troublesome in combination with other vulnerabilities.
Test Plan:
- Read through config options.
- Tried to think about how to do evil things with each one.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8928
Summary: A small but appreciable number of users find flavor on buttons confusing. Remove this flavor. This retains flavor in headers, error messages, etc., which doesn't cause confusion.
Test Plan: Looked at a revision, task, paste, macro, etc.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8812
Summary: I haven't been able to understand why this isn't set by default in production environments (since it is recommended to do so anyway).
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8743
Summary:
Fixes T4773. For config settings of type `list<string>`, `set`, or `list<regex>`, the "defaults" table and "examples" aren't always in the same format you should actually use when changing the setting.
This is pretty confusing. Instead, always show the settings in the desired format. For example, if the user should enter a newline-separated list, show them a newline separated list.
Test Plan:
- Grepped for `list<string>`, `list<regex>`, and `'set'`; verified all the config had the right example format (most already did).
- Viewed config settings of various kinds, including custom settings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4773
Differential Revision: https://secure.phabricator.com/D8725
Summary: This can be used to lock yourself out of an instance, so prevent web edits.
Test Plan: Loaded page, wasn't web-editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8572
Summary:
- Point them at the new Diviner.
- Make them a little less cumbersome to write.
Test Plan: Found almost all of these links in the UI and clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8553
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary: Cookie-prefix should fix phabricator instances where x.com and x.y.com have conflicting cookie names
Test Plan: Pushed branch to dev.phab.example.com, logged into phab.example.com and into dev.phab.example.com.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7979
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary:
I'm just going to store application policy settings (like view/edit policy, and default policies for content) in config, because:
1) We'll need access to it on every page, and Config is "free" since we already pull it.
2) Building separate storage and transactions seems like overkill, we get less-nice but pretty-reasonable transactions for free with config.
3) We could easily move it later if this is a bad call.
Also fix some formatting.
Test Plan: See future revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7202
Summary: Ref T603. We have a real policy app now, so put the config options there. Revise the description of the public policy switch to make it clear that enabling it immediately opens up the user directory and various other interfaces.
Test Plan: Viewed/edited config setting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7154
Summary: This allows administrative overreach. Administrators can enable `javascript:` and then XSS things if this isn't locked.
Test Plan: Viewed value on web UI, verified it was locked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6975
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Fixes T3710. The text on these options is switched around.
Test Plan: {F54051} {F54052}
Reviewers: btrahan, nmalcolm, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3710
Differential Revision: https://secure.phabricator.com/D6737
Summary:
Fixes T3632. Cleans up a bunch of DarkConsole stuff:
- The config setting had out-of-date instructions. Modernize the instructions.
- The setting was sort of hidden under "Display Preferences". Move it to a new "Developer Preferences".
- The setting magically appeared if DarkConsole was enabled on the install. Instead, always show it but explain why it isn't availalbe.
- When the user enables the console, also force it to actually be shown.
- Call out instructions about use of the "`" key more clearly.
Test Plan: Viewed config setting. Viewed settings panel. Changed setting. Enabling the setting showed DarkConsole.
Reviewers: garoevans, chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3632
Differential Revision: https://secure.phabricator.com/D6594
Summary: The `phabricator.allowed-uris` config setting is not checked properly when trying to set cookies.
Test Plan:
Set an alternate URI, then accessed Phabricator. No longer received a secondary cookie error.
Hit the new exceptions to test them:
{F51131}
{F51132}
Reviewers: btrahan, garoevans
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6528
Summary:
Ref T2852. It's a little tricky to figure out Asana workspace IDs right now. If the viewer has a linked account, just pull their workspaces and show them which IDs are available.
(In theory, we could use a `<select>`, but it would have more edge cases; this seems like a pretty solid fix.)
Test Plan: {F49938}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6437
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary: Ref T3322. Depends on D6297. Here are some Phabricator tweaks to complment D6297.
Test Plan: {F47522}
Reviewers: garoevans
Reviewed By: garoevans
CC: aran, chad
Maniphest Tasks: T3322
Differential Revision: https://secure.phabricator.com/D6298
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary: Ref T1536. This is the last major migration. Moves us over to the DB and drops all the config stuff.
Test Plan:
- Ran the migration.
- Saw all my old config brought forward and respected, with accurate settings.
- Ran LDAP import.
- Grepped for all removed config options.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, wez
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6243
Summary:
Ref T1703. This sets the stage for (but does not yet implement) custom UI types for config. In particular, a draggable list for custom fields.
I might make all the builtin types go through this at some point too, but don't really want to bother for the moment. It would be very slightly cleaner but woudn't get us much of anything.
Test Plan:
UI now renders via custom code, although that code does nothing (produces an unadorned text field):
{F45693}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1703
Differential Revision: https://secure.phabricator.com/D6154
Summary: At the global level, truncate emails at a user-configured size.
Test Plan: Untested, as I could not get PHP to send emails on my box, but if you can this should be very easy to test. Just set the max size to something like .001 kilobytes and make sure it does the right thing.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1392
Differential Revision: https://secure.phabricator.com/D6118
Summary:
A few more of these issues have cropped up recently. Basically:
- Webservers often (by default, I guess?) have a different or nonexistent $PATH.
- Users have a hard time figuring this out, since it's not obvious that the webserver might have a different configuration than the CLI, and they can run "git" and such themselves fine, and they don't normally use SetEnv or similar in webserver config.
I've been pursuing one prong of attack here (better detection and more tailored errors); this is a second prong (try to just guess the configuration correctly).
In 99% of cases, the binaries in question are in one of these three places, so just make them the default appended paths. If users have wacky configs they can override the setting.
Test Plan: Viewed config locally.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6039
Summary:
Kind of a quick look at an idea for T2184
Ref T2184
Test Plan: Make sure the site still loads
Reviewers: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T2184
Differential Revision: https://secure.phabricator.com/D6045
Summary: Using PhabricatorExternalAccount in place maniphest.default-public-author.
Test Plan:
Using receivemail to see if the a new entry is made in the 'phabircator_user.user_externalaccount' table. Few things, I noticed that phabricator creates table 'user_externalaccout'. And now it throws up error 'Unknown column 'dateCreated' in 'field list''. Awaiting your comments.
{F41370}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5747
Summary:
Currently, `isInstalled()` and `getAllInstalledApplications()` are inconsistent:
- `isInstalled()` returns true for beta apps, even if `phabricator.show-beta-applications` is false.
- `getAllInstalledApplications()` omits beta apps if `phabricator.show-beta-applications` is false.
Making the beta config control installs (not just homepage visibility) makes far more sense as we roll out more thorough application integrations.
Make `isInstalled()` respect beta, and clean up some callsites.
D5602 builds on this.
Test Plan: Installed/uninstalled beta apps, verified Conpherence menu/panel and other application integrations dropped out of the UI.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5603
Summary:
See D5561. Ref T2378.
- Add `support/bin/*` to .gitignore so any symlinks or binaries won't get picked up by Git.
- Add a README so Git preserves the directory and there's at least //some// documentation of its existence.
Test Plan: ummmmm
Reviewers: jevripio, codeblock, btrahan
Reviewed By: jevripio
CC: aran
Maniphest Tasks: T2378
Differential Revision: https://secure.phabricator.com/D5562
Summary:
We have a fair number of conditionals on the existence of the access log. Instead, always build it and just don't write it if the user doesn't want a version on disk.
Also, formalize logged-in user PHID (avoids object existence juggling) in the access log and move microseconds-since-startup to PhabricatorStartup (simplifies index.php).
Depends on D5532. Fixes T2860. Ref T2870.
Test Plan: Disabled access log, verified XHProf writes occurred correctly.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2860, T2870
Differential Revision: https://secure.phabricator.com/D5533
Summary: Use UA strings to detect platform; override general monospaced settings with platform-specific ones. Fixes T2868.
Test Plan: whatcouldgowrong
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2868
Differential Revision: https://secure.phabricator.com/D5526
Summary:
The welcome.enabled feature is turned on by default; unsure of
whether this is desired by upstream.
Test Plan:
Apply the patch and see the welcome content. It's configurable
in the config.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5339
Summary: T2381
Test Plan:
Include existing setup issues in the ignore config option,
reduces the number of setup issues in the status bar, moves ignored
issues to the bottom of the list, and marks them as ignored.
Also include a string corresponding to no setup issue, and verify that
application does not break.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5072
Summary: Makes sense with `QueryFuture`.
Test Plan: Switched secure.phabricator.com to MySQLi and nothing exploded.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5066
Test Plan: Enter in a url and create a macro. :)
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran, dctrwatson, Korvin
Differential Revision: https://secure.phabricator.com/D5039
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
Summary: Preserving animation of GIF profile Pictures
Test Plan: Uploaded Animated images as profile pictures to check if the animation of gif images is preserved and it does :) somewhat !
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4833
Summary: Refactor options related to verbose error reporting and forcing disk reads into a single developer option.
Test Plan: Run Phabricator with the developer-mode option set and check that errors print stack traces, static assets are always reloaded, etc.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4780
Summary: Created Applications application which allows uninstallation & installation of application.
Test Plan: In "Applications" application, clicked on uninstalled the application by cliking Uninstall and chekcing whether they are really uninstalled(Disabling URI & in appearance in the side pane). Then Clicked on the install button of the uninstalled application to check whether they are installed.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4715
Summary: Added a reply handler. A few problems -- first, I can't seem to get this to actually send me email so I haven't been able to reply (which I would have done by generating a reply, then copying the raw email into scripts/mail_handler.php). Second, the subject is often terrible on these emails -- unless the conpherence is named its something gross like "E4:" Third, on create I am noticing an error on array_combine() which I think is related to the need to write array_combine_not_broken or what have you I saw go by... (PhabricatorTransactionEditor does array_combine(xaction->getOldValue(), xaction->getOldValue()) and complains that the arrays are empty)
Test Plan: noted that /mail/ said mails were being sent
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2399
Differential Revision: https://secure.phabricator.com/D4656
Summary:
There were a few defaults that got changed when porting to PHP. Most of them
seem to be accidental, so this diff sets them back to correctness.
Test Plan:
php> require '../libphutil/src/__phutil_library_init__.php';
php> require 'src/__phutil_library_init__.php'
php> $a = PhabricatorApplicationConfigOptions::loadAllOptions()
php> $b = require 'conf/default.conf.php';
php> $x = array();
php> foreach($a as $key => $obj) { $x[$key] = $obj->getDefault(); }
php> foreach($x as $key => $default) { if ($b[$key] != $default) { echo "$key has different default.\n"; } }
log.access.format has different default.
(seems to be intentional)
PHP Notice: Undefined index: phabricator.env in /usr/lib/python2.7/site-packages/phpsh/phpsh.php(577) : eval()'d code on line 1
(no longer in config file)
PHP Notice: Undefined index: test.value in /usr/lib/python2.7/site-packages/phpsh/phpsh.php(577) : eval()'d code on line 1
(not in config file)
metamta.default-address has different default.
(intentional)
metamta.domain has different default.
(intentional)
PHP Notice: Undefined index: phid.external-loaders in /usr/lib/python2.7/site-packages/phpsh/phpsh.php(577) : eval()'d code on line 1
(no longer in config file)
phame.skins has different default.
(fixed in D4618)
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4621
Summary: I heard this HTTP thing is pretty good.
Test Plan: @starruler did things which confirmed this is less bad than D4611.
Reviewers: starruler
Reviewed By: starruler
CC: aran
Differential Revision: https://secure.phabricator.com/D4612
Summary: Fixes T2392.
Test Plan: grepped for others, this is the only `set` with non-array default
Reviewers: chad, starruler
Reviewed By: starruler
CC: aran
Maniphest Tasks: T2392
Differential Revision: https://secure.phabricator.com/D4611
Summary: These should default to array() so they're safe to `foreach` over.
Test Plan: Grepped for 'list<string>'.
Reviewers: codeblock, btrahan, starruler, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4600
Summary:
- PHABRICATOR_ENV is now optional. If you don't specify it, we won't load a config file.
- PhabricatorSetup is now gone.
- I removed the alternate file domain check for now, see T2380.
- `phabricator.setup` config is now gone.
- Rewrote documentation:
- No more mentions of `phabricator.setup`.
- Normal install guide no longer mentions PHABRICATOR_ENV. This is now an advanced topic.
- Clarified that you only need to set up one of apache, nginx or lighttpd.
- Tweaked a few things I've seen users have difficulty with.
This should have no effect on any existing installs, but make the process much simpler for future installs.
Closes T2221.
Closes T2223.
Closes T2228.
Test Plan:
- Removed my PHABRICATOR_ENV and went through the install process.
- Generated and read documentation.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2221, T2223, T2228
Differential Revision: https://secure.phabricator.com/D4596
Summary:
Fixes T2293.
We currently hard-require this in setup. We do not need to; we don't actually need it until we start running daemons. Move it to post-install and provide more guidance.
We could make this even easier in the future, but we'd need to special case it, since it's dangerous to let it be set to any value (if you set it to the wrong value, you can't log in). We could safely have a workflow which writes the current request URI into the database configuration, or a two-stage workflow where we set the URI and then verify it, but these both imply some special casing and complication. This should be a step forward from where we are today, regardless.
Test Plan:
Removed "phabricator.base-uri" from my configuration. Verified Phabricator still works.
Without "phabricator.base-uri" configured, logged in from multiple host names (127.0.0.1:8080, local.aphront.com:8080).
Configured "phabricator.base-uri". Verified my unblessed session no longer worked. Verified setup issue went away.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2293
Differential Revision: https://secure.phabricator.com/D4580
Summary: Might not be the cleanest way to do this, but seems to work.
Test Plan:
- Saved an option which used the new enum type.
- Changed it.
- Saw it show up on the list view.
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4572
Summary:
T2345
getConfig throws an Exception when the key does not exist.
Also removes dead code that throws an Exception.
Test Plan:
Reloaded the Phabricator home page. In the process, found
2 Exceptions thrown due to nonexistent keys. After addressing these problems,
the home page loads without Exceptions.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4541
Summary: Fixed T2349
Test Plan:
Could not visibly see version at footer any more. Appeared in the top of /config.
Does not appear as a config option in /config.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2349
Differential Revision: https://secure.phabricator.com/D4539
Summary: Because the Default configuration provider is loaded before custom libraries, any config options specified in them don't get a default values.
Test Plan: Looked at /config/
Reviewers: epriestley, codeblock, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4532
Summary:
If your configuration overrides the connection adapter, we need to load libraries before we can setup the database config source.
Also lock this since it won't work when edited from the web anymore, and so sneaky users can't upload stuff and then edit their config to run arbitrary code.
Test Plan: See chatlog in #phabricator. This is a problem for Facebook only.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4498
Summary: The remaining hash/key values are already-migrated, I am just bad at grep. Also implement a "set" type.
Test Plan: Looked at set, edited set.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4476
Summary:
Allow extra options to be locked, hidden or masked via config. These options are themselves locked and can not be edited via the web UI.
The primary goal here is to let us lock or hide things from SaaS installs (e.g., keys, etc.), or to let server administrators lock or hide information from web UI administrators if they want to for some reason.
The secondary goal is to remove the `darkconsole.config-mask` option, although I might just remove the panel entirely and put it in the config app, since that probably makes far more sense. Yeahhhhh... probably doing that.
These options need masks when ported (they haven't been ported yet):
phabricator.csrf-key
phabricator.mail-key
security.hmac-key
Test Plan: Artifically tweaked lock/hide settings on options, verified the UI respected them.
Reviewers: codeblock, btrahan
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4472
