Summary:
Depends on D20010. Ref T920. Allow users to designate which contact number is "primary": the number we'll actually send stuff to.
Since this interacts in weird ways with "disable", just do a "when any number is touched, put all of the user's rows into the right state" sort of thing.
Test Plan:
- Added numbers, made numbers primary, disabled a primary number, un-disabled a number with no primaries. Got sensible behavior in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20011
Summary: Depends on D20008. Ref T920. Continue fleshing out contact number behaviors.
Test Plan:
- Enabled and disabled a contact number.
- Saw list, detail views reflect change.
- Added number X, disabled it, added it again (allowed), enabled the disabled one ("already in use" exception).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D20010
Summary:
Depends on D20006. Ref T13222. Currently, the "MFA Is Required" gate doesn't let you do anything else, but you'll need to be able to access "Contact Numbers" if an install provides SMS MFA.
Tweak this UI to give users limited access to settings, so they can set up contact numbers and change their language.
(This is a little bit fiddly, and I'm doing it early on partly so it can get more testing as these changes move forward.)
Test Plan: {F6146136}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D20008
Summary:
Depends on D19988. See D19826 for the last UI expansion. I don't have an especially strong product rationale for un-fixed-width'ing Settings since it doesn't suffer from the "mystery meat actions" issues that other fixed-width UIs do, but I like the full-width UI better and the other other fixed-width UIs all (?) have some actual rationale (e.g., large tables, multiple actions on subpanels), so "consistency" is an argument here.
Also rename "account" to "language" since both settings are language-related.
This moves away from the direction in D18436.
Test Plan:
Clicked each Settings panel, saw sensible rendering at full-width.
{F6145944}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20005
Summary:
Ref T920. To send you SMS messages, we need to know your phone number.
This adds bare-bone basics (transactions, storage, editor, etc).
From here:
**Disabling Numbers**: I'll let you disable numbers in an upcoming diff.
**Primary Number**: I think I'm just going to let you pick a number as "primary", similar to how email works. We could imagine a world where you have one "MFA" number and one "notifications" number, but this seems unlikely-ish?
**Publishing Numbers (Profile / API)**: At some point, we could let you say that a number is public / "show on my profile" and provide API access / directory features. Not planning to touch this for now.
**Non-Phone Numbers**: Eventually this could be a list of other similar contact mechanisms (APNS/GCM devices, Whatsapp numbers, ICQ number, twitter handle so MFA can slide into your DM's?). Not planning to touch this for now, but the path should be straightforward when we get there. This is why it's called "Contact Number", not "Phone Number".
**MFA-Required + SMS**: Right now, if the only MFA provider is SMS and MFA is required on the install, you can't actually get into Settings to add a contact number to configure SMS. I'll look at the best way to deal with this in an upcoming diff -- likely, giving you partial access to more of Setings before you get thorugh the MFA gate. Conceptually, it seems reasonable to let you adjust some other settings, like "Language" and "Accessibility", before you set up MFA, so if the "you need to add MFA" portal was more like a partial Settings screen, maybe that's pretty reasonable.
**Verifying Numbers**: We'll probably need to tackle this eventually, but I'm not planning to worry about it for now.
Test Plan: {F6137174}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: avivey, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19988
Summary:
Ref T13222. This updates the CLI tools and documentation for the changes in D19975.
The flags `--type` and `--all-types` retain their current meaning. In most cases, `bin/auth strip --type totp` is sufficient and you don't need to bother looking up the relevant provider PHID. The existing `bin/auth list-factors` is also unchanged.
The new `--provider` flag allows you to select configs from a particular provider in a more granular way. The new `bin/auth list-mfa-providers` provides an easy way to get PHIDs.
(In the Phacility cluster, the "Strip MFA" action just reaches into the database and deletes rows manually, so this isn't terribly important. I verified that the code should still work properly.)
Test Plan:
- Ran `bin/auth list-mfa-providers`.
- Stripped by user / type / provider.
- Grepped for `list-factors` and `auth strip`.
- Hit all (?) of the various possible error cases.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19976
Summary:
Ref T13222. Users configure "Factor Configs", which say "I have an entry on my phone for TOTP secret key XYZ".
Currently, these point at raw implementations -- always "TOTP" in practice.
To support configuring available MFA types (like "no MFA") and adding MFA types that need some options set (like "Duo", which needs API keys), bind "Factor Configs" to a "Factor Provider" instead.
In the future, several "Factors" will be available (TOTP, SMS, Duo, Postal Mail, ...). Administrators configure zero or more "MFA Providers" they want to use (e.g., "Duo" + here's my API key). Then users can add configs for these providers (e.g., "here's my Duo account").
Upshot:
- Factor: a PHP subclass, implements the technical details of a type of MFA factor (TOTP, SMS, Duo, etc).
- FactorProvider: a storage object, owned by administrators, configuration of a Factor that says "this should be available on this install", plus provides API keys, a human-readable name, etc.
- FactorConfig: a storage object, owned by a user, says "I have a factor for provider X on my phone/whatever with secret key Q / my duo account is X / my address is Y".
Couple of things not covered here:
- Statuses for providers ("Disabled", "Deprecated") don't do anything yet, but you can't edit them anyway.
- Some `bin/auth` tools need to be updated.
- When no providers are configured, the MFA panel should probably vanish.
- Documentation.
Test Plan:
- Ran migration with providers, saw configs point at the first provider.
- Ran migration without providers, saw a provider created and configs pointed at it.
- Added/removed factors and providers. Passed MFA gates. Spot-checked database for general sanity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19975
Summary: If you go through the `accountadmin` flow and change nothing, you get an exception about the transaction not having any effect. Instead, let the `applyTransactions` call continue even on no effect.
Test Plan: Ran `accountadmin` without changing anything for an existing user. No longer got an exception about no-effect transactions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20009
Summary: See https://secure.phabricator.com/D18901#249481. Update the docs and a warning string to reflect the new reality that `bin/auth recover` is now able to recover any account, not just administrators.
Test Plan: Mk 1 eyeball
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20007
Summary:
See PHI1030. When you edit an Almanac object, we attempt to discover all the related objects so we can dirty the repository cluster routing cache: if you modify a Device or Service that's part of a clustered repository, we need to blow away our cached view of the layout.
Currently, we don't correctly find linked Bindings when editing a Device, so we may miss Services which have keys that need to be disabled. Instead, discover these linked objects.
See D17000 for the original implementation and more context.
Test Plan:
- Used `var_dump()` to dump out the discovered objects and dirtied cache keys.
- Before change: editing a Service dirties repository routing keys (this is correct), but editing a Device does not.
- After change: editing a Device now correctly dirties repository routing keys.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20003
Summary:
Fixes T13082. When you create a revision (say, `D111`) with `Ref T222` in the body, we write a `D111 -> T222` edge ("revision 111 references task 222") and an inverse `T222 -> D111` edge ("task 222 is referenced by revision 111").
We also apply a transaction to `D111` ("alice added a task: Txxx.") and an inverse transaction to `T222` ("alice added a revision: Dxxx").
Currently, it appears that the inverse transaction can sometimes generate mail faster than `D111` actually commits its (database) transactions, so the mail says "alice added a revision: Unknown Object (Differential Revision)". See T13082 for evidence that this is true, and a reproduction case.
To fix this, apply the inverse transaction (to `T222`) after we commit the main object (here, `D111`).
This is tricky because when we apply transactions, the transaction editor automatically "fixes" them to be consistent with the database state. For example, if a task already has title "XYZ" and you set the title to "XYZ" (same title), we just no-op the transaction.
It also fixes edge edits. The old sequence was:
- Open (database) transaction.
- Apply our transaction ("alice added a task").
- Apply the inverse transaction ("alice added a revision").
- Write the edges to the database.
- Commit (database) transaction.
Under this sequence, the inverse transaction was "correct" and didn't need to be fixed, so the fixing step didn't touch it.
The new sequence is:
- Open (database) transaction.
- Apply our transaction ("alice added a task").
- Write the edges.
- Commit (database) transaction.
- Apply the inverse transaction ("alice added a revision").
Since the inverse transaction now happens after the database edge write, the fixing step detects that it's a no-op and throws it away if we do this naively.
Instead, add some special cases around inverse edits to skip the correction/fixing logic, and just pass the "right" values in the first place.
Test Plan:
Added and removed related tasks from revisions, saw appropriate transactions render on both objects.
(It's hard to be certain this completely fixes the issue since it only happened occasionally in the first place, but we can see if it happens any more on `secure`.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13082, T222
Differential Revision: https://secure.phabricator.com/D19969
Summary: See PHI1030. When installs hit this error, provide more details about which node we ended up on and what's going on.
Test Plan:
```
$ git pull
phabricator-ssh-exec: This repository request (for repository "spellbook") has been incorrectly routed to a cluster host (with device name "local.phacility.net", and hostname "orbital-3.local") which can not serve the request.
The Almanac device address for the correct device may improperly point at this host, or the "device.id" configuration file on this host may be incorrect.
Requests routed within the cluster by Phabricator are always expected to be sent to a node which can serve the request. To prevent loops, this request will not be proxied again.
(This is a read request.)
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20002
Summary: Fixes T13239. See that task for discussion.
Test Plan: Tried to send welcome mail with no "Welcome" message.
Maniphest Tasks: T13239
Differential Revision: https://secure.phabricator.com/D20001
Summary:
See PHI1026. Allow installs to export Conduit call logs to a flat format.
Also, add date range queries.
Test Plan:
- Exported some call logs.
- Filtered logs by date.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19996
Summary:
Depends on D19994. See PHI1027. If an install has customized the "Welcome Mail" message, include it in welcome mail. A special custom message from the profile screen overrides it, if provided.
(I fiddled with putting the custom message as "placeholder" text in the remarkup area as a hint, but newlines in "placeholder" text appear to have issues in Safari and Firefox. I think this is probably reasonably clear as-is.)
Make both render remarkup-into-text so things like links work properly, as it's reasonably likely that installs will want to link to things.
Test Plan:
- With custom "Welcome Mail" text, sent mail with no custom override (got custom text) and a custom override (got overridden text).
- Linked to some stuff, got sensible links in the mail (`bin/mail show-outbound`).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19995
Summary: Depends on D19992. Ref T13222. If administrators provide a custom login message, show it on the login screen.
Test Plan:
{F6137930}
- Viewed login screen with and without a custom message.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19994
Summary:
Ref T13222. Long ago, we had a Config option (`welcome.html`) to let you dump HTML onto the login screen, but this was relatively hard to use and not good from a security perspective.
In some cases this was obsoleted by Dashboards, but there's at least some remaining set of use cases for actual login instructions on the login screen. For example, WMF has some guidance on //which// SSO mechanism to use based on what types of account you have. On `secure`, users assume they can register by clicking "Log In With GitHub" or whatever, and it might reduce frustration to tell them upfront that registration is closed.
Some other types of auth messaging could also either use customization or defaults (e.g., the invite/welcome/approve mail).
We could do this with a bunch of Config options, but I'd generally like to move to a world where there's less stuff in Config and more configuration is contextual. I think it tends to be easier to use, and we get a lot of fringe benefits (granular permissions, API, normal transaction logs, more abililty to customize workflows and provide contextual help/hints, etc). Here, for example, we can provide a remarkup preview, which would be trickier with Config.
This does not actually do anything yet.
Test Plan: {F6137541}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19992
Summary:
See PHI1027. Currently, we allow you to customize invite email, but not most other types of email (approve, welcome). As a step forward, also allow welcome email to be customized with a message.
I considered separating the custom text from the main text with something heavyhanded ("alice added this custom message:") or a beautiful ASCII art divider like one of these:
https://www.asciiart.eu/art-and-design/dividers
...but nothing truly sung to me.
This only works on the profile flow for now. I'm planning to let you set a default message. I may or may not let you customize from "Create New User", seems like the default message probably covers most of that. Probably won't touch `scripts/user/add_user.php` since that's not really exactly super supported.
Test Plan:
Sent mail with and without custom messages, reviewed it with `bin/mail show-outbound`.
{F6137410}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19991
Summary:
See PHI1027. Currently, the "Welcome" mail always tells users to set a password. This definitely isn't helpful if an install doesn't have password auth enabled.
We can't necessarily guess what they're supposed to do, so just give them generic instructions ("set up your account"). Upcoming changes will give administrators more control over the mail content.
Test Plan: Sent both versions of the mail, used `bin/mail show-outbound` to inspect them for correctness.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19990
Summary:
Ref PHI1027. Currently, `PhabricatorUser` has a couple of mail-related methods which shouldn't really be there in the long term. Immediately, I want to make some adjusments to the welcome email.
Move "Welcome" mail generation to a separate class and consolidate all the error handling. (Eventually, "invite" and "verify address" email should move to similar subclasses, too.) Previously, a bunch of errors/conditions got checked in multiple places.
The only functional change is that we no longer allow you to send welcome mail to disabled users.
Test Plan:
- Used "Send Welcome Mail" from profile pages to send mail.
- Hit "not admin", "disabled user", "bot/mailing list" errors.
- Used `scripts/user/add_user.php` to send welcome mail.
- Used "Create New User" to send welcome mail.
- Verified mail with `bin/mail show-outbound`. (Cleaned up a couple of minor display issues here.)
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19989
Summary: Ref T13238. Warn users about these horrible options and encourage them to defuse them.
Test Plan: Hit both warnings, fixed the issues, issues went away.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13238
Differential Revision: https://secure.phabricator.com/D19999
Summary:
Ref T13222. Currently, if a remote address fails a few login attempts (5) in a short period of time (15 minutes) we require a CAPTCHA for each additional attempt.
This relies on:
- Administrators configuring ReCAPTCHA, which they may just not bother with.
- Administrators being comfortable with Google running arbitrary trusted Javascript, which they may not be comfortable with.
- ReCAPTCHA actually being effective, which seems likely true for unsophisticated attackers but perhaps less true for more sophisticated attackers (see <https://github.com/ecthros/uncaptcha2>, for example).
(For unsophisticated attackers and researchers, "Rumola" has been the standard CAPTCHA bypass tool for some time. This is an extension that pays humans to solve CAPTCHAs for you. This is not practical at "brute force a strong password" scale. Google appears to have removed it from the Chrome store. The "submit the captcha back to Google's APIs" trick probably isn't practical at brute-force-scale either, but it's easier to imagine weaponizing that than weaponizing human solvers.)
Add a hard gate behind the CAPTHCA wall so that we fail into a secure state if there's no CAPTCHA or the attacker can defeat CAPTCHAs at a very low cost.
The big downside to this is that an attacker who controls your remote address (e.g., is behind the same NAT device you're behind on corpnet) can lock you out of your account. However:
- That //should// be a lot of access (although maybe this isn't that high of a barrier in many cases, since compromising a "smart fridge" or "smart water glass" or whatever might be good enough).
- You can still do "Forgot password?" and login via email link, although this may not be obvious.
Test Plan:
- Logged in normally.
- Failed many many login attempts, got hard gated.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19997
Summary:
In ~2012, the first of these options was added because someone who hates dogs and works at Asana also hated `[Differential]` in the subject line. The use case there was actually //removing// the text, not changing it, but I made the prefix editable since it seemed like slightly less of a one-off.
These options are among the dumbest and most useless config options we have and very rarely used, see T11760. A very small number of instances have configured one of these options.
Newer applications stopped providing these options and no one has complained.
You can get the same effect with `translation.override`. Although I'm not sure we'll keep that around forever, it's a reasonable replacement today. I'll call out an example in the changelog to help installs that want to preserve this option.
If we did want to provide this, it should just be in {nav Applications > Settings} for each application, but I think it's wildly-low-value and "hack via translations" or "local patch" are entirely reasonable if you really want to change these strings.
Test Plan: Grepped for `subject-prefix`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19993
Summary:
Ref T13222. If we receive a message and nothing processes it, we normally try to send the user an error message like "hey, nothing handled this, maybe you got the address wrong".
Just skip the "send them an error message" part if any recipient was reserved, so if you "Reply All" to a message that is "From: noreply@phabricator" you don't get a relatively unhelpful error.
This also makes sure that the "void" address doesn't generate bounces if the "From" is a valid user email address (e.g., with `metamta.can-send-as-user`). That is:
- Phabricator needs to send a mail with only "CC" users.
- Phabricator puts the "void" address in "To" as a placeholder.
- The "void" address happens to route back to Phabricator.
We don't want that mail to bounce to anywhere. Normally, it won't:
- From is usually "noreply@phabricator", which isn't a user, so we won't send anything back: we only send mail to verified user email addresses.
- The message will have "X-Phabricator-Sent-This-Message: true" so we won't process it at all.
...but this is another layer of certainty.
Test Plan: Used `bin/mail receive-test` to receive mail to an invalid, unreserved address (bounce/error email) and an invalid, reserved address (no bounce/error email).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19987
Summary:
See PHI1023. Ref T7607. Occasionally, companies need their billing address (or some other custom text) to appear on invoices to satisfy process or compliance requirements.
Allow accounts to have a custom "Billing Name" and a custom "Billing Address" which appear on invoices.
Test Plan: {F6134707}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7607
Differential Revision: https://secure.phabricator.com/D19979
Summary:
See PHI1025. When you "Import Columns", we test if you're trying to import into a board that already has columns. However, this test is too broad (it incorrectly detects "proxy" columns for milestones as columns) and not user-friendly (it returns 400 instead of a readable error).
Correct these issues, and refine some of the logic around proxy columns.
Test Plan:
- Created a project, A.
- Created a milestone under that project.
- Imported another project's columns to A's workboard.
- Before change: Unhelpful 400.
- After change: import worked fine.
- Also, hit the new error dialogs and read through them.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19978
Summary: See D19973. Fix a couple typos and try to make some sections more clear / less scary.
Test Plan: Read text.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19986
Summary:
Fixes T13234. Don't let application email addresses be configured with user addresses. This might prevent an unlikely bit of mischief where someone does this intentionally, detailed in T13234.
(Possibly, these tables should just be merged some day, similar to how the "Password" table is now a shared resource that's modular enough for multiple applications to use it.)
Test Plan: {F6132259}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13234
Differential Revision: https://secure.phabricator.com/D19974
Summary:
Fixes T11782. When you "Close as Duplicate", generate a "[Merged]" email by making the merge the first transaction.
(There are other, more-deterministic ways to do this with action strength, but this is much simpler and I believe it suffices.)
Test Plan: Used "Close as Duplicate", got a "[Merged]" email out of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11782
Differential Revision: https://secure.phabricator.com/D19972
Summary:
Fixes T12921. Currently, we call `getTitleForHTMLMail()`, but that calls `getTitleForMail()` which forces us into text rendering mode.
Instead, have `getTitleForHTML/TextMail()` force the rendering mode, then call `getTitleForMail()` with the desired rendering mode.
This causes stories like "epriestely added dependent tasks: x, y." to appear as links in email instead of plain text.
Test Plan: Used `bin/mail show-outbound --id ... --dump-html > out.html` to verify HTML mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12921
Differential Revision: https://secure.phabricator.com/D19968
Summary: Ref T13222. Ref T920. This is the last of the upstream adapter updates.
Test Plan:
- Sent mail with SES.
- Sent mail with "sendmail". I don't have sendmail actually configured to an upstream MTA so I'm not 100% sure this worked, but the `sendmail` binary didn't complain and almost all of the code is shared with SES, so I'm reasonably confident this actually works.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T920
Differential Revision: https://secure.phabricator.com/D19965
Summary:
Ref T920. Ref T12404.
- Update to the new "$message" API.
- Remove "encoding". I believe "base64" is always the best value for this since we stopped seeing issues once we changed the default.
- Remove "mailer". This is a legacy option that makes little sense given how configuration now works.
- Rename to "SMTP". This doesn't affect users anymore since this mailer has been configured as `smtp` for about a year.
- This does NOT add a timeout since the SMTP code is inside PHPMailer (see T12404).
Test Plan: Sent messages with many mail features via GMail SMTP and SendGrid SMTP.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12404, T920
Differential Revision: https://secure.phabricator.com/D19961
Summary:
See T1024. When "CAN_EDIT" became default in T13186, this was missed as an exception.
Watching shouldn't require "CAN_EDIT", so exempt it.
Test Plan:
- Before change: tried to watch a project I could not edit, got a policy error.
- After change: watched/unwatched a project I could not edit.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19977
Summary:
Ref T920. Ref T5969.
- Update to the new "$message" API.
- Update to Sendgrid v3.
- Add a timeout.
- This removes the "api-user" option, which Sendgrid no longer seems to use.
Test Plan: Sent Sendgrid messages with `bin/mail send-test ...` using subject/headers/attachments/html/to/cc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jbrownEP
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19960
Summary: Ref T920. Ref T5969. Update the Mailgun adapter for the API changes and add a timeout.
Test Plan: Configured Mailgun as a mailer, sent mail with subject/to/cc/headers/html/attachments using `bin/mail send-test`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19959
Summary: Depends on D19956. Ref T920. Move the TestAdapter to the new API and adjust a couple of tests for the changes.
Test Plan: All tests now pass.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19957
Summary:
Depends on D19955. Ref T920. Ref T5969. Update Postmark to accept new Message objects. Also:
- Update the inbound whitelist.
- Add a little support for `media` configuration.
- Add a service call timeout (see T5969).
- Drop the needless word "Implementation" from the Adapter class tree. I could call these "Mailers" instead of "Adapters", but then we get "PhabricatorMailMailer" which feels questionable.
Test Plan: Used `bin/mail send-test` to send mail via Postmark with various options (mulitple recipients, text vs html, attachments).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5969, T920
Differential Revision: https://secure.phabricator.com/D19956
Summary:
Depends on D19954. Ref T920. This is a step toward a world where "Mailers" are generic and may send messages over a broader array of channels (email, SMS, postal mail).
There are a few major parts here:
- Instead of calling `$mailer->setSubject()`, `$mailer->setFrom()`, etc., build in intermediate `$message` object first, then pass that to the mailer.
- This breaks every mailer! This change on its own does not fix them. I plan to fix them in a series of "update mailer X", "update mailer Y" followups.
- This generally makes the API easier to change in the far future, and in the near future supports mailers accepting different types of `$message` objects with the same API.
- Pull the "build an email" stuff out into a `PhabricatorMailEmailEngine`. `MetaMTAMail` is already a huge object without also doing this translation step. This is just a separation/simplification change, but also tries to fight against `MetaMTAMail` getting 5K lines of email/sms/whatsapp/postal-mail code.
- Try to rewrite the "build an email" stuff to be a bit more straightforward while making it generate objects. Prior to this change, it had this weird flow:
```lang=php
foreach ($properties as $key => $prop) {
switch ($key) {
case 'xyz':
// ...
}
}
```
This is just inherently somewhat hard to puzzle out, and it means that processing order depends on internal property order, which is quite surprising.
Test Plan: This breaks everything on its own; adapters must be updated to use the new API. See followups.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D19955
Summary:
Depends on D19952. Ref T13222. Never process mail targets if they match:
- The "default" address which we send mail "From".
- The "void" address which we use as a placholder "To" when we only have "CC" addresses.
- Any address from a list of reserved/administrative names.
The first two prevent loops. The third one prevents abuse.
There's a reasonably well-annotated list of reservations and reasons here:
https://webmasters.stackexchange.com/questions/104811/is-there-any-list-of-email-addresses-reserved-because-of-security-concerns-for-a
Stuff like `support@` seems fine; stuff like `ssladmin@` might let you get SSL certs issued for a domain you don't control.
Also, forbid users from creating application emails with these reserved addresses.
Finally, build the default and void addresses somewhat more cleverly.
Test Plan: Added unit tests, tried to configured reserved addresses, hit the default/void cases manually with `bin/mail receive-test`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: olexiy.myronenko
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19953
Summary:
Fixes T7477. Fixes T13066. Currently, inbound mail is processed by the first receiver that matches any "To:" address. "Cc" addresses are ignored.
**To, CC, and Multiple Receivers**
Some users would like to be able to "Cc" addresses like `bugs@` instead of having to "To" the address, which makes perfect sense. That's the driving use case behind T7477.
Since users can To/Cc multiple "create object" or "update object" addresses, I also wanted to make the behavior more general. For example, if you email `bugs@` and also `paste@`, your mail might reasonably make both a Task and a Paste. Is this useful? I'm not sure. But it seems like it's pretty clearly the best match for user intent, and the least-surprising behavior we can have. There's also no good rule for picking which address "wins" when two or more match -- we ended up with "address order", which is pretty arbitrary since "To" and "Cc" are not really ordered fields.
One part of this change is removing `phabricator.allow-email-users`. In practice, this option only controlled whether users were allowed to send mail to "Application Email" addresses with a configured default author, and it's unlikely that we'll expand it since I think the future of external/grey users is Nuance, not richer interaction with Maniphest/Differential/etc. Since this option only made "Default Author" work and "Default Author" is optional, we can simplify behavior by making the rule work like this:
- If an address specifies a default author, it allows public email.
- If an address does not, it doesn't.
That's basically how it worked already, except that you could intentionally "break" the behavior by not configuring `phabricator.allow-email-users`. This is a backwards compatility change with possible security implications (it might allow email in that was previously blocked by configuration) that I'll call out in the changelog, but I suspect that no installs are really impacted and this new behavior is generally more intuitive.
A somewhat related change here is that each receiver is allowed to react to each individual email address, instead of firing once. This allows you to configure `bugs-a@` and `bugs-b@` and CC them both and get two tasks. Useful? Maybe not, but seems like the best execution of intent.
**Sender vs Author**
Adjacently, T13066 described an improvement to error handling behavior here: we did not distinguish between "sender" (the user matching the email "From" address) and "actor" (the user we're actually acting as in the application). These are different when you're some internet rando and send to `bugs@`, which has a default author. Then the "sender" is `null` and the "author" is `@bugs-robot` or whatever (some user account you've configured).
This refines "Sender" vs "Author". This is mostly a purity/correctness change, but it means that we won't send random email error messages to `@bugs-robot`.
Since receivers are now allowed to process mail with no "sender" if they have some default "actor" they would rather use instead, it's not an error to send from an invalid address unless nothing processes the mail.
**Other**
This removes the "abundant receivers" error since this is no longer an error.
This always sets "external user" mail recipients to be unverified. As far as I can tell, there's no pathway by which we send them email anyway (before or after this change), although it's possible I'm missing something somewhere.
Test Plan:
I did most of this with `bin/mail receive-test`. I rigged the workflow slightly for some of it since it doesn't support multiple addresses or explicit "CC" and adding either would be a bit tricky.
These could also be tested with `scripts/mail/mail_handler.php`, but I don't currently have the MIME parser extension installed locally after a recent upgrade to Mojave and suspect T13232 makes it tricky to install.
- Ran unit tests, which provide significant coverage of this flow.
- Sent mail to multiple Maniphest application emails, got multiple tasks.
- Sent mail to a Maniphest and a Paste application email, got a task and a paste.
- Sent mail to a task.
- Saw original email recorded on tasks. This is a behavior particular to tasks.
- Sent mail to a paste.
- Sent mail to a mock.
- Sent mail to a Phame blog post.
- Sent mail to a Legalpad document.
- Sent mail to a Conpherence thread.
- Sent mail to a poll.
- This isn't every type of supported object but it's enough of them that I'm pretty confident I didn't break the whole flow.
- Sent mail to an object I could not view (got an error).
- As a non-user, sent mail to several "create an object..." addresses.
- Addresses with a default user worked (e.g., created a task).
- Addresses without a default user did not work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13066, T7477
Differential Revision: https://secure.phabricator.com/D19952
Summary:
Ref T13222. Ref T13231. See PHI912. I'm planning to turn MFA providers into concrete objects, so you can disable and configure them.
Currently, we only support TOTP, which doesn't require any configuration, but other provider types (like Duo or Yubikey OTP) do require some configuration (server URIs, API keys, etc). TOTP //could// also have some configuration, like "bits of entropy" or "allowed window size" or whatever, if we want.
Add concrete objects for this and standard transaction / policy / query support. These objects don't do anything interesting yet and don't actually interact with MFA, this is just skeleton code for now.
Test Plan:
{F6090444}
{F6090445}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13231, T13222
Differential Revision: https://secure.phabricator.com/D19935
Summary:
D19940 removed this file entirely, which has led to at least one user who was unsure how to proceed now that `cluster.mailers` is required for outbound mail: https://discourse.phabricator-community.org/t/invalid-argument-supplied-for-foreach-phabricatormetamtamail-php/2287
This isn't //always// a setup issue for installs that don't care about sending mail, but this at least this gives a sporting chance to users who don't follow the changelogs.
Also, I'm not sure if there's a way to use `pht()` to generate links; right now the phurl is just in plain text.
Test Plan: Removed `cluster.mailers` config; observed expected setup issue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19964
Summary: See PHI1017. This is a trivial fix even though these burnups are headed toward a grisly fate.
Test Plan: Moused over some January datapoints, saw "1" instead of "0".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19967
Summary:
After T13217 import_repository_symbols.php was showing a lot of warnings, using %LQ fixes that.
I'm aware, that there are changes planned to the whole managing the symbols complex but until then less warnings are nice.
Test Plan: No more warnings when updating symbols
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D19962
