Summary: See D3125#3
Test Plan:
Well, apparently the FB test Phabricator has no other flags
in it, so I modified the database by hand... the changed revision was
not marked as flagged in Differential.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1557
Differential Revision: https://secure.phabricator.com/D3130
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary:
The tables are currently kind of wide, and the emails for
non-recognized users seem like the least useful parts, so I put them in
tooltips so they're only visible if you want them. On the other hand, it
means you can only view one at a time, and if you're on mobile you can't
see them at all. Overall, not sure whether this is a good idea.
Test Plan:
Load Diffusion pages with some recognized and some
unrecognized users. Hover over the latter and see that emails appear.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3123
Summary:
Currently, on secure.phabricator.com, if you type "e" we generate about 600 users and ship them over the wire. This takes ~300ms.
Instead, limit the results to a superset of what the client will actually show.
Test Plan: Ran user typeahead queries, tweaked limit to 1.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3121
Summary:
Put a flag icon to the left of each flagged revision in the
Differential summary tables. Flag is colored correctly and when hovered
reveals the note in a tooltip.
As epriestley specifically notes that the Flagged Revisions table should
only be shown when a user is looking at their own revisions, maybe this
ought to be limited by what controller is using this view, or something.
Test Plan:
View Differential main page. Check that flags appear
correctly if some revisions are flagged.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, avivey
Maniphest Tasks: T1557
Differential Revision: https://secure.phabricator.com/D3125
Summary:
- Include symbols in main typeahead results.
- Simplify the symbol query a bit and extend PhabricatorOffsetPagedQuery. There was some stuff around language ranking that I got rid of, I think the theory there was that mapping file extensions to languages might not work in general but I think it works fine in practice, and we have more config stuff now around guessing languages and getting the mappings right.
- Make it easier to debug the typeahead by showing the results in page format for non-ajax requests.
- When we have too many results, show only the top few of each type.
Depends on D3116, D3117
Test Plan: Used typeahead, got symbols in results. Hit endpoint with non-ajax, got useful debug view.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3118
Summary: If a change copies some file `A` to `B` and also edits `A`, we currently record this as an indirect change and don't show the edits to `A` in the diff. Instead, record these as direct changes.
Test Plan: Created two commits, one which copied `A` to `B` without modifying `A` and one which copied `A` to `B` and modified A. Viewed both commits in Diffusion. The unmodified commit did not show `A`, and the modified commit did (with the correct changes).
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: champo, aran
Differential Revision: https://secure.phabricator.com/D3120
Summary: See discussion in D3103. We don't need this for now; if we do in the future we should probably use an alternate implementation.
Test Plan: Grepped for 'placeholder', viewed UI examples.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3115
Summary:
This needs a bunch of refinement but pretty much works. Currently shows only users and applications. Plans:
- Show actual search results too.
- Clean up the datasource endpoint so it's less of a mess.
- Make other typeaheads look more like this one.
- Improve sorting.
- Make object names hit the named objects as the first match.
Test Plan: Will attach screenshots.
Reviewers: btrahan, vrana, chad
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3110
Summary:
Each query takes over 2 seconds in FBCODE.
I didn't find a way how to speed them up.
There's also no easy way how to parallelize them at least.
So AJAX is the last instance.
Test Plan: Loaded commit with one branch and no tag.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3112
Summary:
We have some false positives on commit changes checker.
I'm not sure if the reason is a difference between `git diff` and `svn diff` or something else but making this more robust doesn't harm anything.
We couldn't make the files from the whole changeset because I want to ignore context bigger than `$num_lines` to reduce rebase noise.
Test Plan:
Ran the method on diff which had false positive previously.
Ran the method on a diff with real change.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3107
Summary:
- Looks better (can probably still use some tweaks), especially search.
- Moves logout from weird footer location to main menu.
- Reactive: on tablets and phones, the menu adjusts to remain useful.
- Fixed position on desktops for future side nav changes.
- Adds an icon header thing that's currently hard-coded but will be application-driven soon.
Test Plan: Used menu on desktop, tablet, phone, logged in / logged out, toggled darkconsole. Will add some screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3105
Summary: The new menu stuff needs this but it was easy to pull out on its own.
Test Plan: Cliked UI example buttons.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3104
Summary:
Support placeholder text for inputs. We currently don't use this because it requires JS and doesn't degrade (no JS means you have zero idea what the input is for if it isn't separately labeled) but there are some cases where intent is obvious from context (for example, the search input in the menu bar, which is fairly obvious on its own and will soon have a magnifying glass icon) and in such cases it's much prettier and saves a bunch of space over an explicit label. Add a behavior so we can add placeholders where they make sense.
This implementation is somewhat sanity-checked agianst the two jQuery placeholder implementations I was able to google:
https://github.com/danielstocks/jQuery-Placeholder/https://github.com/mathiasbynens/jquery-placeholder
Since we don't currently have any uses cases, I haven't included support for making JS access to the `value` work, for password inputs, or for dynamically altering the placeholder.
Test Plan: Played around with the placeholder in the UI example in various browsers and couldn't break it.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1569
Differential Revision: https://secure.phabricator.com/D3103
Summary: For any count fact, allow a chart to be drawn. INCREDIBLY POWERFUL DATA ANALYSIS PLATFORM.
Test Plan: Drew a chart of object counts. Drew the Maniphest burn chart.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3099
Summary:
- Add PhabricatorApplication. This is a general class that I have grand designs for, but used here to allow applications to provide objects for analysis by the facts appliction.
- Add FactCursors, to keep track of where iterators are.
- Make the daemon do something sort of useful.
- Add `bin/fact cursors` for showing and managing objects and cursors.
- Add some options to `bin/fact analyze`.
Test Plan:
- `bin/fact cursors`, `bin/fact cursors --reset DifferentialRevision`, `bin/fact cursors --reset X`
- `bin/fact analyze`, `bin/fact analyze --all`, `bin/fact analyze --iterator DifferentialRevision --skip-aggregates`
- `bin/phd debug fact`
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3098
Summary: helping noobs help themselves
Test Plan: set $rows = array() and verified the txt. also threw a false && for my isAdmin conditional to check the other txt
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1086, T1360
Differential Revision: https://secure.phabricator.com/D3100
After this commit: d9296638cd
I started getting this error:
Unhandled Exception ("Exception")
Bad getter call: getURIObject
It turns out that getURIObject just needed to be getRemoteURIObject and then the problem goes away.
Summary: Not totally sure about this but I think it's okay?
Test Plan: Loaded /fact/, got a more readable page.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3090
Summary:
In D3063, we stopped converting "user@domain:path" git-style URIs, but this broke the SSH-detection code and I missed that in my test plan because my test case uses natural SSH keys so the omission of SSH flags didn't cause failures.
This code is a bit of a mess anyway. Consolidate and refactor it to be a bit simpler, and add test coverage.
Test Plan: Ran unit tests. Ran "test_connection.php" in SSH and non-SSH modes, verified SSH modes generated appropriate ssh-agent commands around the git remote commands.
Reviewers: vrana, btrahan, tberman
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1529
Differential Revision: https://secure.phabricator.com/D3093
Summary: Currently, if you have a task with project "X" and you apply a batch edit to it to remove "X", the action has no effect because we incorrectly skip the edit as a no-op. Instead, don't perform this check for edge edits.
Test Plan: Batch removed a project from several tasks with only one project.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1566
Differential Revision: https://secure.phabricator.com/D3092
Summary:
Some facts are aggregations of other facts. For example, we may compute how many times each macro is used in each object as a "raw fact":
Dnnn uses macro "psyduck" 6 times.
But we want to present this data in aggregate form, e.g. "order macros by popularity". We can do this at runtime and it probably won't be too awful a query, but we can also aggregate it cheaply:
Macro "psyduck" is used 3920 times across all objects.
...and then do a query like "select macros ordered by usage".
"Aggregate" facts support facts like this. The aggregate facts I've implemented are:
- Count of all objects.
- Count of objects of type X.
- Last time facts were updated.
These clearly fit the "aggregate" facts template well. I'm not 100% sure macros do. We can use this table to answer a question like "What are the most popular macros, ordered by use?" We can also use it to answer a question like "What are the most popular macros in the last 6 months?", if we build a specific fact for that. But we can't use it to answer a question like "What are the most popular macros between times X and Y?". Maybe that's important; maybe not.
This seems like a good fit for at least some types of facts.
I'll de-magic the keys a bit in the next diff.
Test Plan: Ran the engines and got some aggregated facts about other facts.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3089
Test Plan: Jumped on correct line in SVN, Git and HG repos.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3084
Summary:
Basic "Fact" application with some storage, part of a daemon, and a control binary.
= Goals =
The general idea is that we have various statistics we'd like to compute, like the frequency of image macros, reviewer responsiveness, task close rates, etc. Computing these on page load is expensive and messy. By building an ETL pipeline and running it in a daemon, we can precompute statistics and just pull them out of "stats" tables.
One way to do this is just to completely hard-code everything, e.g. have a daemon that runs every hour which issues a big-ass query and dumps results into a table per-fact or per fact-group. But this has a bunch of drawbacks: adding new stuff to the pipeline is a pain, various fact aggregators can't share much code, updates are slow and expensive, we can never build generic graphs on top of it, etc.
I'm hoping to build an ETL pipeline which is generic enough that we can use it for most things we're interested in without needing schema changes, and so that installs can use it also without needing schema changes, while still being specific enough that it's fast and we can build useful stuff on top of it. I'm not sure if this will actually work, but it would be cool if it does so I'm starting pretty generally and we'll see how far I get. I haven't built this exact sort of thing before so I might be way off.
I'm basing the whole thing on analyzing entire objects, not analyzing changes to objects. So each part of the pipeline is handed an object and told "analyze this", not handed a change. It pretty much deletes all the old data about that thing and then writes new data. I think this is simpler to implement and understand, and it protects us from all sorts of weird issues where we end up with some kind of garbage in the DB and have to wipe the whole thing.
= Facts =
The general idea is that we extract "facts" out of objects, and then the various view interfaces just report those facts. This change has on type of fact, a "raw fact", which is directly derived from an object. These facts are concerete and relate specifically to the object they are derived from. Some examples of such facts might be:
D123 has 9 comments.
D123 uses macro "psyduck" 15 times.
D123 adds 35 lines.
D123 has 5 files.
D123 has 1 object.
D123 has 1 object of type "DREV".
D123 was created at epoch timestamp 89812351235.
D123 was accepted by @alincoln at epoch timestamp 8397981839.
The fact storage looks like this:
<factType, objectPHID, objectA, valueX, valueY, epoch>
Currently, we supprot one optional secondary key (like a user PHID or macro PHID), two optional integer values, and an optional timestamp. We might add more later. Each fact type can use these fields if it wants. Some facts use them, others don't. For instance, this diff adds a "N:*" fact, which is just the count of total objects in the system. These facts just look like:
<"N:*", "PHID-xxxx-yyyy", ...>
...where all other fields are ignored. But some of the more complex facts might look like:
<"DREV:accept", "PHID-DREV-xxxx", "PHID-USER-yyyy", ..., ..., nnnn> # User 'yyyy' accepted at epoch 'nnnn'.
<"FILE:macro", "PHID-DREV-xxxx", "PHID-MACR-yyyy", 17, ..., ...> # Object 'xxxx' uses macro 'yyyy' 17 times.
Facts have no uniqueness constraints. For @vrana's reviewer responsiveness stuff, we can insert multiple rows for each reviewer, e.g.
<"DREV:reviewed", "PHID-DREV-xxxx", "PHID-USER-yyyy", nnnn, ..., mmmm> # User 'yyyy' reviewed revision 'xxxx' after 'nnnn' seconds at 'mmmm'.
The second value (valueY) is mostly because we need it if we sample anything (valueX = observed value, valueY = sample rate) but there might be other uses. We might need to add "objectB" at some point too -- currently we can't represent a fact like "User X used macro Y on revision Z", so it would be impossible to compute macro use rates //for a specific user// based on this schema. I think we can start here though and see how far we get.
= Aggregated Facts =
These aren't implemented yet, but the idea is that we can then take the "raw facts" and compute derived/aggregated/rollup facts based on the raw fact table. For example, the "count" fact can be aggregated to arrive at a count of all objects in the system. This stuff will live in a separate table which does have uniqueness constraints, and come in the next diff.
We might need some kind of time series facts too, not sure about that. I think most of our use cases today are covered by raw facts + aggregated facts.
Test Plan: Ran `bin/fact` commands and verified they seemed to do reasonable things.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, majak
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3078
Summary: Some people don't like these, so they should be able to turn them off.
Test Plan:
Toggled the setting on and off; loaded a page in diffusion and differential
that should have symbol cross-references, and saw that they weren't linked
when I had the setting disabled. I also checked that the symbols are still
linked when the setting hasn't been touched.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3069
Summary: I will need this for tracking line number in Blame previous revision.
Test Plan:
$ hg diff --rev 0:1
$ svn diff -r 64382:64383 README
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3083
Summary:
See title - This simply adds a checkbox to the "Edit User" page in the
admin view, to allow an administrator to re-send the "Welcome to Phabricator"
email.
Test Plan:
Sent myself another welcome email using the checkbox.
Created a new user using the admin panel, to make sure emails still get
sent for new users.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1524
Differential Revision: https://secure.phabricator.com/D3081
Summary:
We need `$this->old` and `$this->new` in `renderShield()`.
Broken since D2358.
Test Plan: Loaded contents of file with lots of changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3080
Summary: This iterator processes objects that have been updated.
Test Plan:
Ran this test script:
$cursor = null;
$table = new DifferentialRevision();
while (true) {
$iterator = new PhabricatorFactsUpdateIterator($table, $cursor);
foreach ($iterator as $new_cursor => $update) {
echo "{$new_cursor} => D".$update->getID()."\n";
$cursor = $new_cursor;
}
echo "Zzz...\n";
sleep(5);
}
Verified it iterated over every object and then stopped. Made a comment on a differenial revision, verified it iterated over the object after 15 seconds.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1562
Differential Revision: https://secure.phabricator.com/D3077
Summary:
- the current LDAP auth flow expects a DN to look like
cn=ossareh,ou=Users,dc=example,dc=com
- however many LDAP setups have their dn look something like
cn=Mike Ossareh,ou=Users,dc=example,dc=com
Test Plan:
Test if logins work with a LDAP setup which has cn=Full Name
instead of cn=username.
To test you should ensure you set the properties needed to
trigger the search before login as detailed in conf/default.conf.php
Reviewers: epriestley
CC: mbeck, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3072
Summary: Currently, the logout link is this awkward form in the footer since we have to CSRF it. Enable a GET + dialog + confirm workflow instead so the logout link can just be a link instead of this weird mess.
Test Plan: Went to /logout/, logged out.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3066
Summary:
This allows getting stats for any arbitrary period, e.g.
- everything
- last week
- week before last week
Test Plan: Ran the script for last week.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3064
Summary:
The final goal is to display reviewers response time on homepage.
This is a building block for it.
The algorithm is quite strict - it doesn't count simple comment as response because reviewers would be able to cheat with comments like "I'm overwhelmed right now and will review next week".
We are more liberate in Phabricator where reviewers response with comments without changing the status quite often but I'm not trying to improve response times in Phabricator so this is irrelevant.
Reviewers in Facebook changes status more often (to clean their queue) so I follow this approach.
There is currently no way to track reviewers silently added and removed in Edit Revision but it's not a big deal.
The algorithm doesn't track commandeered revision, there's a TODO for it.
Response times are put in two buckets: `$reviewed` and `$not_reviewed`.
`$reviewed` contains reviewers who took action, `$not_reviewed` contains reviewers who didn't respond on time.
I will probably compute average time from `$reviewed` and raise it for those `$not_reviewed` that are higher than this average.
The idea is to not favor reviewers who were only lucky for being in a group with someone fast.
Test Plan: Passed test.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3062
Summary: I want to link this page from outside.
Test Plan: /phid/?phids=PHID-USER-gsraq7yc66r4stl4c6u3
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3060
Summary:
Currently, we have this cumbersome `PhabricatorRepositoryCommitMessageDetailParser` hook. This is really old and outdated; I want to just use the Differential custom field parser. See T945 for a specific application.
However, it allows installs to override author/committer association. Instead, provide an event hook for doing this.
Test Plan: Added a listener, made every commit resolve to "turtle", parsed some commits, verified the events looked sane and they now correctly were all attributed to "turtle".
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1337
Differential Revision: https://secure.phabricator.com/D3040
Summary:
The URL /jump/?jump=%s now does the same thing as the POST version,
except that if it couldn't jump to anything, it loads /jump/ with the
query filled in so you can just press enter (we don't save searches
without a CSRF token).
(hsb: Sorry for stealing your task! It hadn't been updated in two months
so I figured you were likely not actively working on it.)
Test Plan:
Loaded given URL with different queries (including various
flavors of nothing). Search worked as expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1036
Differential Revision: https://secure.phabricator.com/D3047
Summary: Our auditors requested displaying this field and I can image that it can be useful.
Test Plan: /audit/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3044
Summary: I changed this from `getName` to `getFullName` to make attached revisions, etc., render with "Dnnn", but accidentally made all users render as "username (Full Name)". Be a little more surgical in application of full names.
Test Plan: Created a task and attached a CC, a task and a revision. Verified the task and revision rendered with "Tnn", "Dnn" but the CC rendered as "username".
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3041
